1/* 2 * Copyright (c) 2010 Broadcom Corporation 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 * 16 * File contents: support functions for PCI/PCIe 17 */ 18 19#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 20 21#include <linux/delay.h> 22 23#include <defs.h> 24#include <chipcommon.h> 25#include <brcmu_utils.h> 26#include <brcm_hw_ids.h> 27#include <soc.h> 28#include "types.h" 29#include "pub.h" 30#include "pmu.h" 31#include "aiutils.h" 32 33/* slow_clk_ctl */ 34 /* slow clock source mask */ 35#define SCC_SS_MASK 0x00000007 36 /* source of slow clock is LPO */ 37#define SCC_SS_LPO 0x00000000 38 /* source of slow clock is crystal */ 39#define SCC_SS_XTAL 0x00000001 40 /* source of slow clock is PCI */ 41#define SCC_SS_PCI 0x00000002 42 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ 43#define SCC_LF 0x00000200 44 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ 45#define SCC_LP 0x00000400 46 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ 47#define SCC_FS 0x00000800 48 /* IgnorePllOffReq, 1/0: 49 * power logic ignores/honors PLL clock disable requests from core 50 */ 51#define SCC_IP 0x00001000 52 /* XtalControlEn, 1/0: 53 * power logic does/doesn't disable crystal when appropriate 54 */ 55#define SCC_XC 0x00002000 56 /* XtalPU (RO), 1/0: crystal running/disabled */ 57#define SCC_XP 0x00004000 58 /* ClockDivider (SlowClk = 1/(4+divisor)) */ 59#define SCC_CD_MASK 0xffff0000 60#define SCC_CD_SHIFT 16 61 62/* system_clk_ctl */ 63 /* ILPen: Enable Idle Low Power */ 64#define SYCC_IE 0x00000001 65 /* ALPen: Enable Active Low Power */ 66#define SYCC_AE 0x00000002 67 /* ForcePLLOn */ 68#define SYCC_FP 0x00000004 69 /* Force ALP (or HT if ALPen is not set */ 70#define SYCC_AR 0x00000008 71 /* Force HT */ 72#define SYCC_HR 0x00000010 73 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */ 74#define SYCC_CD_MASK 0xffff0000 75#define SYCC_CD_SHIFT 16 76 77#define CST4329_SPROM_OTP_SEL_MASK 0x00000003 78 /* OTP is powered up, use def. CIS, no SPROM */ 79#define CST4329_DEFCIS_SEL 0 80 /* OTP is powered up, SPROM is present */ 81#define CST4329_SPROM_SEL 1 82 /* OTP is powered up, no SPROM */ 83#define CST4329_OTP_SEL 2 84 /* OTP is powered down, SPROM is present */ 85#define CST4329_OTP_PWRDN 3 86 87#define CST4329_SPI_SDIO_MODE_MASK 0x00000004 88#define CST4329_SPI_SDIO_MODE_SHIFT 2 89 90/* 43224 chip-specific ChipControl register bits */ 91#define CCTRL43224_GPIO_TOGGLE 0x8000 92 /* 12 mA drive strength */ 93#define CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 94 /* 12 mA drive strength for later 43224s */ 95#define CCTRL_43224B0_12MA_LED_DRIVE 0xF0 96 97/* 43236 Chip specific ChipStatus register bits */ 98#define CST43236_SFLASH_MASK 0x00000040 99#define CST43236_OTP_MASK 0x00000080 100#define CST43236_HSIC_MASK 0x00000100 /* USB/HSIC */ 101#define CST43236_BP_CLK 0x00000200 /* 120/96Mbps */ 102#define CST43236_BOOT_MASK 0x00001800 103#define CST43236_BOOT_SHIFT 11 104#define CST43236_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */ 105#define CST43236_BOOT_FROM_ROM 1 /* boot from ROM */ 106#define CST43236_BOOT_FROM_FLASH 2 /* boot from FLASH */ 107#define CST43236_BOOT_FROM_INVALID 3 108 109/* 4331 chip-specific ChipControl register bits */ 110 /* 0 disable */ 111#define CCTRL4331_BT_COEXIST (1<<0) 112 /* 0 SECI is disabled (JTAG functional) */ 113#define CCTRL4331_SECI (1<<1) 114 /* 0 disable */ 115#define CCTRL4331_EXT_LNA (1<<2) 116 /* sprom/gpio13-15 mux */ 117#define CCTRL4331_SPROM_GPIO13_15 (1<<3) 118 /* 0 ext pa disable, 1 ext pa enabled */ 119#define CCTRL4331_EXTPA_EN (1<<4) 120 /* set drive out GPIO_CLK on sprom_cs pin */ 121#define CCTRL4331_GPIOCLK_ON_SPROMCS (1<<5) 122 /* use sprom_cs pin as PCIE mdio interface */ 123#define CCTRL4331_PCIE_MDIO_ON_SPROMCS (1<<6) 124 /* aband extpa will be at gpio2/5 and sprom_dout */ 125#define CCTRL4331_EXTPA_ON_GPIO2_5 (1<<7) 126 /* override core control on pipe_AuxClkEnable */ 127#define CCTRL4331_OVR_PIPEAUXCLKEN (1<<8) 128 /* override core control on pipe_AuxPowerDown */ 129#define CCTRL4331_OVR_PIPEAUXPWRDOWN (1<<9) 130 /* pcie_auxclkenable */ 131#define CCTRL4331_PCIE_AUXCLKEN (1<<10) 132 /* pcie_pipe_pllpowerdown */ 133#define CCTRL4331_PCIE_PIPE_PLLDOWN (1<<11) 134 /* enable bt_shd0 at gpio4 */ 135#define CCTRL4331_BT_SHD0_ON_GPIO4 (1<<16) 136 /* enable bt_shd1 at gpio5 */ 137#define CCTRL4331_BT_SHD1_ON_GPIO5 (1<<17) 138 139/* 4331 Chip specific ChipStatus register bits */ 140 /* crystal frequency 20/40Mhz */ 141#define CST4331_XTAL_FREQ 0x00000001 142#define CST4331_SPROM_PRESENT 0x00000002 143#define CST4331_OTP_PRESENT 0x00000004 144#define CST4331_LDO_RF 0x00000008 145#define CST4331_LDO_PAR 0x00000010 146 147/* 4319 chip-specific ChipStatus register bits */ 148#define CST4319_SPI_CPULESSUSB 0x00000001 149#define CST4319_SPI_CLK_POL 0x00000002 150#define CST4319_SPI_CLK_PH 0x00000008 151 /* gpio [7:6], SDIO CIS selection */ 152#define CST4319_SPROM_OTP_SEL_MASK 0x000000c0 153#define CST4319_SPROM_OTP_SEL_SHIFT 6 154 /* use default CIS, OTP is powered up */ 155#define CST4319_DEFCIS_SEL 0x00000000 156 /* use SPROM, OTP is powered up */ 157#define CST4319_SPROM_SEL 0x00000040 158 /* use OTP, OTP is powered up */ 159#define CST4319_OTP_SEL 0x00000080 160 /* use SPROM, OTP is powered down */ 161#define CST4319_OTP_PWRDN 0x000000c0 162 /* gpio [8], sdio/usb mode */ 163#define CST4319_SDIO_USB_MODE 0x00000100 164#define CST4319_REMAP_SEL_MASK 0x00000600 165#define CST4319_ILPDIV_EN 0x00000800 166#define CST4319_XTAL_PD_POL 0x00001000 167#define CST4319_LPO_SEL 0x00002000 168#define CST4319_RES_INIT_MODE 0x0000c000 169 /* PALDO is configured with external PNP */ 170#define CST4319_PALDO_EXTPNP 0x00010000 171#define CST4319_CBUCK_MODE_MASK 0x00060000 172#define CST4319_CBUCK_MODE_BURST 0x00020000 173#define CST4319_CBUCK_MODE_LPBURST 0x00060000 174#define CST4319_RCAL_VALID 0x01000000 175#define CST4319_RCAL_VALUE_MASK 0x3e000000 176#define CST4319_RCAL_VALUE_SHIFT 25 177 178/* 4336 chip-specific ChipStatus register bits */ 179#define CST4336_SPI_MODE_MASK 0x00000001 180#define CST4336_SPROM_PRESENT 0x00000002 181#define CST4336_OTP_PRESENT 0x00000004 182#define CST4336_ARMREMAP_0 0x00000008 183#define CST4336_ILPDIV_EN_MASK 0x00000010 184#define CST4336_ILPDIV_EN_SHIFT 4 185#define CST4336_XTAL_PD_POL_MASK 0x00000020 186#define CST4336_XTAL_PD_POL_SHIFT 5 187#define CST4336_LPO_SEL_MASK 0x00000040 188#define CST4336_LPO_SEL_SHIFT 6 189#define CST4336_RES_INIT_MODE_MASK 0x00000180 190#define CST4336_RES_INIT_MODE_SHIFT 7 191#define CST4336_CBUCK_MODE_MASK 0x00000600 192#define CST4336_CBUCK_MODE_SHIFT 9 193 194/* 4313 chip-specific ChipStatus register bits */ 195#define CST4313_SPROM_PRESENT 1 196#define CST4313_OTP_PRESENT 2 197#define CST4313_SPROM_OTP_SEL_MASK 0x00000002 198#define CST4313_SPROM_OTP_SEL_SHIFT 0 199 200/* 4313 Chip specific ChipControl register bits */ 201 /* 12 mA drive strengh for later 4313 */ 202#define CCTRL_4313_12MA_LED_DRIVE 0x00000007 203 204/* Manufacturer Ids */ 205#define MFGID_ARM 0x43b 206#define MFGID_BRCM 0x4bf 207#define MFGID_MIPS 0x4a7 208 209/* Enumeration ROM registers */ 210#define ER_EROMENTRY 0x000 211#define ER_REMAPCONTROL 0xe00 212#define ER_REMAPSELECT 0xe04 213#define ER_MASTERSELECT 0xe10 214#define ER_ITCR 0xf00 215#define ER_ITIP 0xf04 216 217/* Erom entries */ 218#define ER_TAG 0xe 219#define ER_TAG1 0x6 220#define ER_VALID 1 221#define ER_CI 0 222#define ER_MP 2 223#define ER_ADD 4 224#define ER_END 0xe 225#define ER_BAD 0xffffffff 226 227/* EROM CompIdentA */ 228#define CIA_MFG_MASK 0xfff00000 229#define CIA_MFG_SHIFT 20 230#define CIA_CID_MASK 0x000fff00 231#define CIA_CID_SHIFT 8 232#define CIA_CCL_MASK 0x000000f0 233#define CIA_CCL_SHIFT 4 234 235/* EROM CompIdentB */ 236#define CIB_REV_MASK 0xff000000 237#define CIB_REV_SHIFT 24 238#define CIB_NSW_MASK 0x00f80000 239#define CIB_NSW_SHIFT 19 240#define CIB_NMW_MASK 0x0007c000 241#define CIB_NMW_SHIFT 14 242#define CIB_NSP_MASK 0x00003e00 243#define CIB_NSP_SHIFT 9 244#define CIB_NMP_MASK 0x000001f0 245#define CIB_NMP_SHIFT 4 246 247/* EROM AddrDesc */ 248#define AD_ADDR_MASK 0xfffff000 249#define AD_SP_MASK 0x00000f00 250#define AD_SP_SHIFT 8 251#define AD_ST_MASK 0x000000c0 252#define AD_ST_SHIFT 6 253#define AD_ST_SLAVE 0x00000000 254#define AD_ST_BRIDGE 0x00000040 255#define AD_ST_SWRAP 0x00000080 256#define AD_ST_MWRAP 0x000000c0 257#define AD_SZ_MASK 0x00000030 258#define AD_SZ_SHIFT 4 259#define AD_SZ_4K 0x00000000 260#define AD_SZ_8K 0x00000010 261#define AD_SZ_16K 0x00000020 262#define AD_SZ_SZD 0x00000030 263#define AD_AG32 0x00000008 264#define AD_ADDR_ALIGN 0x00000fff 265#define AD_SZ_BASE 0x00001000 /* 4KB */ 266 267/* EROM SizeDesc */ 268#define SD_SZ_MASK 0xfffff000 269#define SD_SG32 0x00000008 270#define SD_SZ_ALIGN 0x00000fff 271 272/* PCI config space bit 4 for 4306c0 slow clock source */ 273#define PCI_CFG_GPIO_SCS 0x10 274/* PCI config space GPIO 14 for Xtal power-up */ 275#define PCI_CFG_GPIO_XTAL 0x40 276/* PCI config space GPIO 15 for PLL power-down */ 277#define PCI_CFG_GPIO_PLL 0x80 278 279/* power control defines */ 280#define PLL_DELAY 150 /* us pll on delay */ 281#define FREF_DELAY 200 /* us fref change delay */ 282#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ 283 284/* resetctrl */ 285#define AIRC_RESET 1 286 287#define NOREV -1 /* Invalid rev */ 288 289/* GPIO Based LED powersave defines */ 290#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */ 291#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */ 292 293/* When Srom support present, fields in sromcontrol */ 294#define SRC_START 0x80000000 295#define SRC_BUSY 0x80000000 296#define SRC_OPCODE 0x60000000 297#define SRC_OP_READ 0x00000000 298#define SRC_OP_WRITE 0x20000000 299#define SRC_OP_WRDIS 0x40000000 300#define SRC_OP_WREN 0x60000000 301#define SRC_OTPSEL 0x00000010 302#define SRC_LOCK 0x00000008 303#define SRC_SIZE_MASK 0x00000006 304#define SRC_SIZE_1K 0x00000000 305#define SRC_SIZE_4K 0x00000002 306#define SRC_SIZE_16K 0x00000004 307#define SRC_SIZE_SHIFT 1 308#define SRC_PRESENT 0x00000001 309 310/* External PA enable mask */ 311#define GPIO_CTRL_EPA_EN_MASK 0x40 312 313#define DEFAULT_GPIOTIMERVAL \ 314 ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) 315 316#define BADIDX (SI_MAXCORES + 1) 317 318#define IS_SIM(chippkg) \ 319 ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID)) 320 321#define GOODCOREADDR(x, b) \ 322 (((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \ 323 IS_ALIGNED((x), SI_CORE_SIZE)) 324 325struct aidmp { 326 u32 oobselina30; /* 0x000 */ 327 u32 oobselina74; /* 0x004 */ 328 u32 PAD[6]; 329 u32 oobselinb30; /* 0x020 */ 330 u32 oobselinb74; /* 0x024 */ 331 u32 PAD[6]; 332 u32 oobselinc30; /* 0x040 */ 333 u32 oobselinc74; /* 0x044 */ 334 u32 PAD[6]; 335 u32 oobselind30; /* 0x060 */ 336 u32 oobselind74; /* 0x064 */ 337 u32 PAD[38]; 338 u32 oobselouta30; /* 0x100 */ 339 u32 oobselouta74; /* 0x104 */ 340 u32 PAD[6]; 341 u32 oobseloutb30; /* 0x120 */ 342 u32 oobseloutb74; /* 0x124 */ 343 u32 PAD[6]; 344 u32 oobseloutc30; /* 0x140 */ 345 u32 oobseloutc74; /* 0x144 */ 346 u32 PAD[6]; 347 u32 oobseloutd30; /* 0x160 */ 348 u32 oobseloutd74; /* 0x164 */ 349 u32 PAD[38]; 350 u32 oobsynca; /* 0x200 */ 351 u32 oobseloutaen; /* 0x204 */ 352 u32 PAD[6]; 353 u32 oobsyncb; /* 0x220 */ 354 u32 oobseloutben; /* 0x224 */ 355 u32 PAD[6]; 356 u32 oobsyncc; /* 0x240 */ 357 u32 oobseloutcen; /* 0x244 */ 358 u32 PAD[6]; 359 u32 oobsyncd; /* 0x260 */ 360 u32 oobseloutden; /* 0x264 */ 361 u32 PAD[38]; 362 u32 oobaextwidth; /* 0x300 */ 363 u32 oobainwidth; /* 0x304 */ 364 u32 oobaoutwidth; /* 0x308 */ 365 u32 PAD[5]; 366 u32 oobbextwidth; /* 0x320 */ 367 u32 oobbinwidth; /* 0x324 */ 368 u32 oobboutwidth; /* 0x328 */ 369 u32 PAD[5]; 370 u32 oobcextwidth; /* 0x340 */ 371 u32 oobcinwidth; /* 0x344 */ 372 u32 oobcoutwidth; /* 0x348 */ 373 u32 PAD[5]; 374 u32 oobdextwidth; /* 0x360 */ 375 u32 oobdinwidth; /* 0x364 */ 376 u32 oobdoutwidth; /* 0x368 */ 377 u32 PAD[37]; 378 u32 ioctrlset; /* 0x400 */ 379 u32 ioctrlclear; /* 0x404 */ 380 u32 ioctrl; /* 0x408 */ 381 u32 PAD[61]; 382 u32 iostatus; /* 0x500 */ 383 u32 PAD[127]; 384 u32 ioctrlwidth; /* 0x700 */ 385 u32 iostatuswidth; /* 0x704 */ 386 u32 PAD[62]; 387 u32 resetctrl; /* 0x800 */ 388 u32 resetstatus; /* 0x804 */ 389 u32 resetreadid; /* 0x808 */ 390 u32 resetwriteid; /* 0x80c */ 391 u32 PAD[60]; 392 u32 errlogctrl; /* 0x900 */ 393 u32 errlogdone; /* 0x904 */ 394 u32 errlogstatus; /* 0x908 */ 395 u32 errlogaddrlo; /* 0x90c */ 396 u32 errlogaddrhi; /* 0x910 */ 397 u32 errlogid; /* 0x914 */ 398 u32 errloguser; /* 0x918 */ 399 u32 errlogflags; /* 0x91c */ 400 u32 PAD[56]; 401 u32 intstatus; /* 0xa00 */ 402 u32 PAD[127]; 403 u32 config; /* 0xe00 */ 404 u32 PAD[63]; 405 u32 itcr; /* 0xf00 */ 406 u32 PAD[3]; 407 u32 itipooba; /* 0xf10 */ 408 u32 itipoobb; /* 0xf14 */ 409 u32 itipoobc; /* 0xf18 */ 410 u32 itipoobd; /* 0xf1c */ 411 u32 PAD[4]; 412 u32 itipoobaout; /* 0xf30 */ 413 u32 itipoobbout; /* 0xf34 */ 414 u32 itipoobcout; /* 0xf38 */ 415 u32 itipoobdout; /* 0xf3c */ 416 u32 PAD[4]; 417 u32 itopooba; /* 0xf50 */ 418 u32 itopoobb; /* 0xf54 */ 419 u32 itopoobc; /* 0xf58 */ 420 u32 itopoobd; /* 0xf5c */ 421 u32 PAD[4]; 422 u32 itopoobain; /* 0xf70 */ 423 u32 itopoobbin; /* 0xf74 */ 424 u32 itopoobcin; /* 0xf78 */ 425 u32 itopoobdin; /* 0xf7c */ 426 u32 PAD[4]; 427 u32 itopreset; /* 0xf90 */ 428 u32 PAD[15]; 429 u32 peripherialid4; /* 0xfd0 */ 430 u32 peripherialid5; /* 0xfd4 */ 431 u32 peripherialid6; /* 0xfd8 */ 432 u32 peripherialid7; /* 0xfdc */ 433 u32 peripherialid0; /* 0xfe0 */ 434 u32 peripherialid1; /* 0xfe4 */ 435 u32 peripherialid2; /* 0xfe8 */ 436 u32 peripherialid3; /* 0xfec */ 437 u32 componentid0; /* 0xff0 */ 438 u32 componentid1; /* 0xff4 */ 439 u32 componentid2; /* 0xff8 */ 440 u32 componentid3; /* 0xffc */ 441}; 442 443static bool 444ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) 445{ 446 /* no cores found, bail out */ 447 if (cc->bus->nr_cores == 0) 448 return false; 449 450 /* get chipcommon rev */ 451 sii->pub.ccrev = cc->id.rev; 452 453 /* get chipcommon chipstatus */ 454 sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus)); 455 456 /* get chipcommon capabilites */ 457 sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities)); 458 459 /* get pmu rev and caps */ 460 if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) { 461 sii->pub.pmucaps = bcma_read32(cc, 462 CHIPCREGOFFS(pmucapabilities)); 463 sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK; 464 } 465 466 return true; 467} 468 469static struct si_info *ai_doattach(struct si_info *sii, 470 struct bcma_bus *pbus) 471{ 472 struct si_pub *sih = &sii->pub; 473 struct bcma_device *cc; 474 475 sii->icbus = pbus; 476 sii->pcibus = pbus->host_pci; 477 478 /* switch to Chipcommon core */ 479 cc = pbus->drv_cc.core; 480 481 sih->chip = pbus->chipinfo.id; 482 sih->chiprev = pbus->chipinfo.rev; 483 sih->chippkg = pbus->chipinfo.pkg; 484 sih->boardvendor = pbus->boardinfo.vendor; 485 sih->boardtype = pbus->boardinfo.type; 486 487 if (!ai_buscore_setup(sii, cc)) 488 goto exit; 489 490 /* === NVRAM, clock is ready === */ 491 bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0); 492 bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0); 493 494 /* PMU specific initializations */ 495 if (ai_get_cccaps(sih) & CC_CAP_PMU) { 496 (void)si_pmu_measure_alpclk(sih); 497 } 498 499 return sii; 500 501 exit: 502 503 return NULL; 504} 505 506/* 507 * Allocate a si handle and do the attach. 508 */ 509struct si_pub * 510ai_attach(struct bcma_bus *pbus) 511{ 512 struct si_info *sii; 513 514 /* alloc struct si_info */ 515 sii = kzalloc(sizeof(struct si_info), GFP_ATOMIC); 516 if (sii == NULL) 517 return NULL; 518 519 if (ai_doattach(sii, pbus) == NULL) { 520 kfree(sii); 521 return NULL; 522 } 523 524 return (struct si_pub *) sii; 525} 526 527/* may be called with core in reset */ 528void ai_detach(struct si_pub *sih) 529{ 530 struct si_info *sii; 531 532 sii = container_of(sih, struct si_info, pub); 533 534 kfree(sii); 535} 536 537/* 538 * read/modify chipcommon core register. 539 */ 540uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val) 541{ 542 struct bcma_device *cc; 543 u32 w; 544 struct si_info *sii; 545 546 sii = container_of(sih, struct si_info, pub); 547 cc = sii->icbus->drv_cc.core; 548 549 /* mask and set */ 550 if (mask || val) 551 bcma_maskset32(cc, regoff, ~mask, val); 552 553 /* readback */ 554 w = bcma_read32(cc, regoff); 555 556 return w; 557} 558 559/* return the slow clock source - LPO, XTAL, or PCI */ 560static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc) 561{ 562 return SCC_SS_XTAL; 563} 564 565/* 566* return the ILP (slowclock) min or max frequency 567* precondition: we've established the chip has dynamic clk control 568*/ 569static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq, 570 struct bcma_device *cc) 571{ 572 uint div; 573 574 /* Chipc rev 10 is InstaClock */ 575 div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl)); 576 div = 4 * ((div >> SYCC_CD_SHIFT) + 1); 577 return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div); 578} 579 580static void 581ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc) 582{ 583 uint slowmaxfreq, pll_delay, slowclk; 584 uint pll_on_delay, fref_sel_delay; 585 586 pll_delay = PLL_DELAY; 587 588 /* 589 * If the slow clock is not sourced by the xtal then 590 * add the xtal_on_delay since the xtal will also be 591 * powered down by dynamic clk control logic. 592 */ 593 594 slowclk = ai_slowclk_src(sih, cc); 595 if (slowclk != SCC_SS_XTAL) 596 pll_delay += XTAL_ON_DELAY; 597 598 /* Starting with 4318 it is ILP that is used for the delays */ 599 slowmaxfreq = 600 ai_slowclk_freq(sih, false, cc); 601 602 pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; 603 fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; 604 605 bcma_write32(cc, CHIPCREGOFFS(pll_on_delay), pll_on_delay); 606 bcma_write32(cc, CHIPCREGOFFS(fref_sel_delay), fref_sel_delay); 607} 608 609/* initialize power control delay registers */ 610void ai_clkctl_init(struct si_pub *sih) 611{ 612 struct si_info *sii = container_of(sih, struct si_info, pub); 613 struct bcma_device *cc; 614 615 if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL)) 616 return; 617 618 cc = sii->icbus->drv_cc.core; 619 if (cc == NULL) 620 return; 621 622 /* set all Instaclk chip ILP to 1 MHz */ 623 bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK, 624 (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); 625 626 ai_clkctl_setdelay(sih, cc); 627} 628 629/* 630 * return the value suitable for writing to the 631 * dot11 core FAST_PWRUP_DELAY register 632 */ 633u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih) 634{ 635 struct si_info *sii; 636 struct bcma_device *cc; 637 uint slowminfreq; 638 u16 fpdelay; 639 640 sii = container_of(sih, struct si_info, pub); 641 if (ai_get_cccaps(sih) & CC_CAP_PMU) { 642 fpdelay = si_pmu_fast_pwrup_delay(sih); 643 return fpdelay; 644 } 645 646 if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL)) 647 return 0; 648 649 fpdelay = 0; 650 cc = sii->icbus->drv_cc.core; 651 if (cc) { 652 slowminfreq = ai_slowclk_freq(sih, false, cc); 653 fpdelay = (((bcma_read32(cc, CHIPCREGOFFS(pll_on_delay)) + 2) 654 * 1000000) + (slowminfreq - 1)) / slowminfreq; 655 } 656 return fpdelay; 657} 658 659/* 660 * clock control policy function throught chipcommon 661 * 662 * set dynamic clk control mode (forceslow, forcefast, dynamic) 663 * returns true if we are forcing fast clock 664 * this is a wrapper over the next internal function 665 * to allow flexible policy settings for outside caller 666 */ 667bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode) 668{ 669 struct si_info *sii; 670 struct bcma_device *cc; 671 672 sii = container_of(sih, struct si_info, pub); 673 674 cc = sii->icbus->drv_cc.core; 675 bcma_core_set_clockmode(cc, mode); 676 return mode == BCMA_CLKMODE_FAST; 677} 678 679/* Enable BT-COEX & Ex-PA for 4313 */ 680void ai_epa_4313war(struct si_pub *sih) 681{ 682 struct si_info *sii = container_of(sih, struct si_info, pub); 683 struct bcma_device *cc; 684 685 cc = sii->icbus->drv_cc.core; 686 687 /* EPA Fix */ 688 bcma_set32(cc, CHIPCREGOFFS(gpiocontrol), GPIO_CTRL_EPA_EN_MASK); 689} 690 691/* check if the device is removed */ 692bool ai_deviceremoved(struct si_pub *sih) 693{ 694 u32 w = 0; 695 struct si_info *sii; 696 697 sii = container_of(sih, struct si_info, pub); 698 699 if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI) 700 return false; 701 702 pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w); 703 if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM) 704 return true; 705 706 return false; 707} 708