1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * ASIX AX8817X based USB 2.0 Ethernet Devices
4 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
5 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
6 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
7 * Copyright (c) 2002-2003 TiVo Inc.
8 */
9
10#include "asix.h"
11
12#define AX_HOST_EN_RETRIES	30
13
14int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
15			       u16 size, void *data, int in_pm)
16{
17	int ret;
18	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
19
20	BUG_ON(!dev);
21
22	if (!in_pm)
23		fn = usbnet_read_cmd;
24	else
25		fn = usbnet_read_cmd_nopm;
26
27	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
28		 value, index, data, size);
29
30	if (unlikely(ret < size)) {
31		ret = ret < 0 ? ret : -ENODATA;
32
33		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
34			    index, ret);
35	}
36
37	return ret;
38}
39
40int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
41		   u16 size, void *data, int in_pm)
42{
43	int ret;
44	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
45
46	BUG_ON(!dev);
47
48	if (!in_pm)
49		fn = usbnet_write_cmd;
50	else
51		fn = usbnet_write_cmd_nopm;
52
53	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
54		 value, index, data, size);
55
56	if (unlikely(ret < 0))
57		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
58			    index, ret);
59
60	return ret;
61}
62
63void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
64			  u16 size, void *data)
65{
66	usbnet_write_cmd_async(dev, cmd,
67			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
68			       value, index, data, size);
69}
70
71static int asix_set_sw_mii(struct usbnet *dev, int in_pm)
72{
73	int ret;
74
75	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
76
77	if (ret < 0)
78		netdev_err(dev->net, "Failed to enable software MII access\n");
79	return ret;
80}
81
82static int asix_set_hw_mii(struct usbnet *dev, int in_pm)
83{
84	int ret;
85
86	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
87	if (ret < 0)
88		netdev_err(dev->net, "Failed to enable hardware MII access\n");
89	return ret;
90}
91
92static int asix_check_host_enable(struct usbnet *dev, int in_pm)
93{
94	int i, ret;
95	u8 smsr;
96
97	for (i = 0; i < AX_HOST_EN_RETRIES; ++i) {
98		ret = asix_set_sw_mii(dev, in_pm);
99		if (ret == -ENODEV || ret == -ETIMEDOUT)
100			break;
101		usleep_range(1000, 1100);
102		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
103				    0, 0, 1, &smsr, in_pm);
104		if (ret == -ENODEV)
105			break;
106		else if (ret < 0)
107			continue;
108		else if (smsr & AX_HOST_EN)
109			break;
110	}
111
112	return i >= AX_HOST_EN_RETRIES ? -ETIMEDOUT : ret;
113}
114
115static void reset_asix_rx_fixup_info(struct asix_rx_fixup_info *rx)
116{
117	/* Reset the variables that have a lifetime outside of
118	 * asix_rx_fixup_internal() so that future processing starts from a
119	 * known set of initial conditions.
120	 */
121
122	if (rx->ax_skb) {
123		/* Discard any incomplete Ethernet frame in the netdev buffer */
124		kfree_skb(rx->ax_skb);
125		rx->ax_skb = NULL;
126	}
127
128	/* Assume the Data header 32-bit word is at the start of the current
129	 * or next URB socket buffer so reset all the state variables.
130	 */
131	rx->remaining = 0;
132	rx->split_head = false;
133	rx->header = 0;
134}
135
136int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
137			   struct asix_rx_fixup_info *rx)
138{
139	int offset = 0;
140	u16 size;
141
142	/* When an Ethernet frame spans multiple URB socket buffers,
143	 * do a sanity test for the Data header synchronisation.
144	 * Attempt to detect the situation of the previous socket buffer having
145	 * been truncated or a socket buffer was missing. These situations
146	 * cause a discontinuity in the data stream and therefore need to avoid
147	 * appending bad data to the end of the current netdev socket buffer.
148	 * Also avoid unnecessarily discarding a good current netdev socket
149	 * buffer.
150	 */
151	if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
152		offset = ((rx->remaining + 1) & 0xfffe);
153		rx->header = get_unaligned_le32(skb->data + offset);
154		offset = 0;
155
156		size = (u16)(rx->header & 0x7ff);
157		if (size != ((~rx->header >> 16) & 0x7ff)) {
158			netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n",
159				   rx->remaining);
160			reset_asix_rx_fixup_info(rx);
161		}
162	}
163
164	while (offset + sizeof(u16) <= skb->len) {
165		u16 copy_length;
166
167		if (!rx->remaining) {
168			if (skb->len - offset == sizeof(u16)) {
169				rx->header = get_unaligned_le16(
170						skb->data + offset);
171				rx->split_head = true;
172				offset += sizeof(u16);
173				break;
174			}
175
176			if (rx->split_head == true) {
177				rx->header |= (get_unaligned_le16(
178						skb->data + offset) << 16);
179				rx->split_head = false;
180				offset += sizeof(u16);
181			} else {
182				rx->header = get_unaligned_le32(skb->data +
183								offset);
184				offset += sizeof(u32);
185			}
186
187			/* take frame length from Data header 32-bit word */
188			size = (u16)(rx->header & 0x7ff);
189			if (size != ((~rx->header >> 16) & 0x7ff)) {
190				netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n",
191					   rx->header, offset);
192				reset_asix_rx_fixup_info(rx);
193				return 0;
194			}
195			if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
196				netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
197					   size);
198				reset_asix_rx_fixup_info(rx);
199				return 0;
200			}
201
202			/* Sometimes may fail to get a netdev socket buffer but
203			 * continue to process the URB socket buffer so that
204			 * synchronisation of the Ethernet frame Data header
205			 * word is maintained.
206			 */
207			rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
208
209			rx->remaining = size;
210		}
211
212		if (rx->remaining > skb->len - offset) {
213			copy_length = skb->len - offset;
214			rx->remaining -= copy_length;
215		} else {
216			copy_length = rx->remaining;
217			rx->remaining = 0;
218		}
219
220		if (rx->ax_skb) {
221			skb_put_data(rx->ax_skb, skb->data + offset,
222				     copy_length);
223			if (!rx->remaining) {
224				usbnet_skb_return(dev, rx->ax_skb);
225				rx->ax_skb = NULL;
226			}
227		}
228
229		offset += (copy_length + 1) & 0xfffe;
230	}
231
232	if (skb->len != offset) {
233		netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n",
234			   skb->len, offset);
235		reset_asix_rx_fixup_info(rx);
236		return 0;
237	}
238
239	return 1;
240}
241
242int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb)
243{
244	struct asix_common_private *dp = dev->driver_priv;
245	struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
246
247	return asix_rx_fixup_internal(dev, skb, rx);
248}
249
250void asix_rx_fixup_common_free(struct asix_common_private *dp)
251{
252	struct asix_rx_fixup_info *rx;
253
254	if (!dp)
255		return;
256
257	rx = &dp->rx_fixup_info;
258
259	if (rx->ax_skb) {
260		kfree_skb(rx->ax_skb);
261		rx->ax_skb = NULL;
262	}
263}
264
265struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
266			      gfp_t flags)
267{
268	int padlen;
269	int headroom = skb_headroom(skb);
270	int tailroom = skb_tailroom(skb);
271	u32 packet_len;
272	u32 padbytes = 0xffff0000;
273	void *ptr;
274
275	padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
276
277	/* We need to push 4 bytes in front of frame (packet_len)
278	 * and maybe add 4 bytes after the end (if padlen is 4)
279	 *
280	 * Avoid skb_copy_expand() expensive call, using following rules :
281	 * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
282	 *   is false (and if we have 4 bytes of headroom)
283	 * - We are allowed to put 4 bytes at tail if skb_cloned()
284	 *   is false (and if we have 4 bytes of tailroom)
285	 *
286	 * TCP packets for example are cloned, but __skb_header_release()
287	 * was called in tcp stack, allowing us to use headroom for our needs.
288	 */
289	if (!skb_header_cloned(skb) &&
290	    !(padlen && skb_cloned(skb)) &&
291	    headroom + tailroom >= 4 + padlen) {
292		/* following should not happen, but better be safe */
293		if (headroom < 4 ||
294		    tailroom < padlen) {
295			skb->data = memmove(skb->head + 4, skb->data, skb->len);
296			skb_set_tail_pointer(skb, skb->len);
297		}
298	} else {
299		struct sk_buff *skb2;
300
301		skb2 = skb_copy_expand(skb, 4, padlen, flags);
302		dev_kfree_skb_any(skb);
303		skb = skb2;
304		if (!skb)
305			return NULL;
306	}
307
308	packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
309	ptr = skb_push(skb, 4);
310	put_unaligned_le32(packet_len, ptr);
311
312	if (padlen) {
313		put_unaligned_le32(padbytes, skb_tail_pointer(skb));
314		skb_put(skb, sizeof(padbytes));
315	}
316
317	usbnet_set_skb_tx_stats(skb, 1, 0);
318	return skb;
319}
320
321int asix_read_phy_addr(struct usbnet *dev, bool internal)
322{
323	int ret, offset;
324	u8 buf[2];
325
326	ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
327	if (ret < 0)
328		goto error;
329
330	if (ret < 2) {
331		ret = -EIO;
332		goto error;
333	}
334
335	offset = (internal ? 1 : 0);
336	ret = buf[offset];
337
338	netdev_dbg(dev->net, "%s PHY address 0x%x\n",
339		   internal ? "internal" : "external", ret);
340
341	return ret;
342
343error:
344	netdev_err(dev->net, "Error reading PHY_ID register: %02x\n", ret);
345
346	return ret;
347}
348
349int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
350{
351	int ret;
352
353	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
354	if (ret < 0)
355		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
356
357	return ret;
358}
359
360u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
361{
362	__le16 v;
363	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
364
365	if (ret < 0) {
366		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
367		goto out;
368	}
369	ret = le16_to_cpu(v);
370out:
371	return ret;
372}
373
374int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
375{
376	int ret;
377
378	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
379	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
380	if (ret < 0)
381		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
382			   mode, ret);
383
384	return ret;
385}
386
387u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
388{
389	__le16 v;
390	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
391				0, 0, 2, &v, in_pm);
392
393	if (ret < 0) {
394		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
395			   ret);
396		return ret;	/* TODO: callers not checking for error ret */
397	}
398
399	return le16_to_cpu(v);
400
401}
402
403int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
404{
405	int ret;
406
407	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
408	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
409			     mode, 0, 0, NULL, in_pm);
410	if (ret < 0)
411		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
412			   mode, ret);
413
414	return ret;
415}
416
417/* set MAC link settings according to information from phylib */
418void asix_adjust_link(struct net_device *netdev)
419{
420	struct phy_device *phydev = netdev->phydev;
421	struct usbnet *dev = netdev_priv(netdev);
422	u16 mode = 0;
423
424	if (phydev->link) {
425		mode = AX88772_MEDIUM_DEFAULT;
426
427		if (phydev->duplex == DUPLEX_HALF)
428			mode &= ~AX_MEDIUM_FD;
429
430		if (phydev->speed != SPEED_100)
431			mode &= ~AX_MEDIUM_PS;
432	}
433
434	asix_write_medium_mode(dev, mode, 0);
435	phy_print_status(phydev);
436	usbnet_link_change(dev, phydev->link, 0);
437}
438
439int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
440{
441	int ret;
442
443	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
444	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
445	if (ret < 0)
446		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
447			   value, ret);
448
449	if (sleep)
450		msleep(sleep);
451
452	return ret;
453}
454
455/*
456 * AX88772 & AX88178 have a 16-bit RX_CTL value
457 */
458void asix_set_multicast(struct net_device *net)
459{
460	struct usbnet *dev = netdev_priv(net);
461	struct asix_data *data = (struct asix_data *)&dev->data;
462	u16 rx_ctl = AX_DEFAULT_RX_CTL;
463
464	if (net->flags & IFF_PROMISC) {
465		rx_ctl |= AX_RX_CTL_PRO;
466	} else if (net->flags & IFF_ALLMULTI ||
467		   netdev_mc_count(net) > AX_MAX_MCAST) {
468		rx_ctl |= AX_RX_CTL_AMALL;
469	} else if (netdev_mc_empty(net)) {
470		/* just broadcast and directed */
471	} else {
472		/* We use the 20 byte dev->data
473		 * for our 8 byte filter buffer
474		 * to avoid allocating memory that
475		 * is tricky to free later */
476		struct netdev_hw_addr *ha;
477		u32 crc_bits;
478
479		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
480
481		/* Build the multicast hash filter. */
482		netdev_for_each_mc_addr(ha, net) {
483			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
484			data->multi_filter[crc_bits >> 3] |=
485			    1 << (crc_bits & 7);
486		}
487
488		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
489				   AX_MCAST_FILTER_SIZE, data->multi_filter);
490
491		rx_ctl |= AX_RX_CTL_AM;
492	}
493
494	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
495}
496
497static int __asix_mdio_read(struct net_device *netdev, int phy_id, int loc,
498			    bool in_pm)
499{
500	struct usbnet *dev = netdev_priv(netdev);
501	__le16 res;
502	int ret;
503
504	mutex_lock(&dev->phy_mutex);
505
506	ret = asix_check_host_enable(dev, in_pm);
507	if (ret == -ENODEV || ret == -ETIMEDOUT) {
508		mutex_unlock(&dev->phy_mutex);
509		return ret;
510	}
511
512	ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2,
513			    &res, in_pm);
514	if (ret < 0)
515		goto out;
516
517	ret = asix_set_hw_mii(dev, in_pm);
518out:
519	mutex_unlock(&dev->phy_mutex);
520
521	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
522			phy_id, loc, le16_to_cpu(res));
523
524	return ret < 0 ? ret : le16_to_cpu(res);
525}
526
527int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
528{
529	return __asix_mdio_read(netdev, phy_id, loc, false);
530}
531
532static int __asix_mdio_write(struct net_device *netdev, int phy_id, int loc,
533			     int val, bool in_pm)
534{
535	struct usbnet *dev = netdev_priv(netdev);
536	__le16 res = cpu_to_le16(val);
537	int ret;
538
539	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
540			phy_id, loc, val);
541
542	mutex_lock(&dev->phy_mutex);
543
544	ret = asix_check_host_enable(dev, in_pm);
545	if (ret == -ENODEV)
546		goto out;
547
548	ret = asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2,
549			     &res, in_pm);
550	if (ret < 0)
551		goto out;
552
553	ret = asix_set_hw_mii(dev, in_pm);
554out:
555	mutex_unlock(&dev->phy_mutex);
556
557	return ret < 0 ? ret : 0;
558}
559
560void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
561{
562	__asix_mdio_write(netdev, phy_id, loc, val, false);
563}
564
565/* MDIO read and write wrappers for phylib */
566int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
567{
568	struct usbnet *priv = bus->priv;
569
570	return __asix_mdio_read(priv->net, phy_id, regnum, false);
571}
572
573int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
574{
575	struct usbnet *priv = bus->priv;
576
577	return __asix_mdio_write(priv->net, phy_id, regnum, val, false);
578}
579
580int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
581{
582	return __asix_mdio_read(netdev, phy_id, loc, true);
583}
584
585void
586asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
587{
588	__asix_mdio_write(netdev, phy_id, loc, val, true);
589}
590
591void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
592{
593	struct usbnet *dev = netdev_priv(net);
594	u8 opt;
595
596	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
597			  0, 0, 1, &opt, 0) < 0) {
598		wolinfo->supported = 0;
599		wolinfo->wolopts = 0;
600		return;
601	}
602	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
603	wolinfo->wolopts = 0;
604	if (opt & AX_MONITOR_LINK)
605		wolinfo->wolopts |= WAKE_PHY;
606	if (opt & AX_MONITOR_MAGIC)
607		wolinfo->wolopts |= WAKE_MAGIC;
608}
609
610int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
611{
612	struct usbnet *dev = netdev_priv(net);
613	u8 opt = 0;
614
615	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
616		return -EINVAL;
617
618	if (wolinfo->wolopts & WAKE_PHY)
619		opt |= AX_MONITOR_LINK;
620	if (wolinfo->wolopts & WAKE_MAGIC)
621		opt |= AX_MONITOR_MAGIC;
622
623	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
624			      opt, 0, 0, NULL, 0) < 0)
625		return -EINVAL;
626
627	return 0;
628}
629
630int asix_get_eeprom_len(struct net_device *net)
631{
632	return AX_EEPROM_LEN;
633}
634
635int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
636		    u8 *data)
637{
638	struct usbnet *dev = netdev_priv(net);
639	u16 *eeprom_buff;
640	int first_word, last_word;
641	int i;
642
643	if (eeprom->len == 0)
644		return -EINVAL;
645
646	eeprom->magic = AX_EEPROM_MAGIC;
647
648	first_word = eeprom->offset >> 1;
649	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
650
651	eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
652				    GFP_KERNEL);
653	if (!eeprom_buff)
654		return -ENOMEM;
655
656	/* ax8817x returns 2 bytes from eeprom on read */
657	for (i = first_word; i <= last_word; i++) {
658		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
659				  &eeprom_buff[i - first_word], 0) < 0) {
660			kfree(eeprom_buff);
661			return -EIO;
662		}
663	}
664
665	memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
666	kfree(eeprom_buff);
667	return 0;
668}
669
670int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
671		    u8 *data)
672{
673	struct usbnet *dev = netdev_priv(net);
674	u16 *eeprom_buff;
675	int first_word, last_word;
676	int i;
677	int ret;
678
679	netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
680		   eeprom->len, eeprom->offset, eeprom->magic);
681
682	if (eeprom->len == 0)
683		return -EINVAL;
684
685	if (eeprom->magic != AX_EEPROM_MAGIC)
686		return -EINVAL;
687
688	first_word = eeprom->offset >> 1;
689	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
690
691	eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
692				    GFP_KERNEL);
693	if (!eeprom_buff)
694		return -ENOMEM;
695
696	/* align data to 16 bit boundaries, read the missing data from
697	   the EEPROM */
698	if (eeprom->offset & 1) {
699		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
700				    &eeprom_buff[0], 0);
701		if (ret < 0) {
702			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
703			goto free;
704		}
705	}
706
707	if ((eeprom->offset + eeprom->len) & 1) {
708		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
709				    &eeprom_buff[last_word - first_word], 0);
710		if (ret < 0) {
711			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
712			goto free;
713		}
714	}
715
716	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
717
718	/* write data to EEPROM */
719	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
720	if (ret < 0) {
721		netdev_err(net, "Failed to enable EEPROM write\n");
722		goto free;
723	}
724	msleep(20);
725
726	for (i = first_word; i <= last_word; i++) {
727		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
728			   i, eeprom_buff[i - first_word]);
729		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
730				     eeprom_buff[i - first_word], 0, NULL, 0);
731		if (ret < 0) {
732			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
733				   i);
734			goto free;
735		}
736		msleep(20);
737	}
738
739	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
740	if (ret < 0) {
741		netdev_err(net, "Failed to disable EEPROM write\n");
742		goto free;
743	}
744
745	ret = 0;
746free:
747	kfree(eeprom_buff);
748	return ret;
749}
750
751void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
752{
753	/* Inherit standard device info */
754	usbnet_get_drvinfo(net, info);
755	strscpy(info->driver, DRIVER_NAME, sizeof(info->driver));
756	strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
757}
758
759int asix_set_mac_address(struct net_device *net, void *p)
760{
761	struct usbnet *dev = netdev_priv(net);
762	struct asix_data *data = (struct asix_data *)&dev->data;
763	struct sockaddr *addr = p;
764
765	if (netif_running(net))
766		return -EBUSY;
767	if (!is_valid_ether_addr(addr->sa_data))
768		return -EADDRNOTAVAIL;
769
770	eth_hw_addr_set(net, addr->sa_data);
771
772	/* We use the 20 byte dev->data
773	 * for our 6 byte mac buffer
774	 * to avoid allocating memory that
775	 * is tricky to free later */
776	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
777	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
778							data->mac_addr);
779
780	return 0;
781}
782