1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller 4 * 5 * Copyright (C) 2012 Alan Ott <alan@signal11.us> 6 * Signal 11 Software 7 */ 8 9#include <linux/spi/spi.h> 10#include <linux/interrupt.h> 11#include <linux/mod_devicetable.h> 12#include <linux/module.h> 13#include <linux/regmap.h> 14#include <linux/ieee802154.h> 15#include <linux/irq.h> 16#include <net/cfg802154.h> 17#include <net/mac802154.h> 18 19/* MRF24J40 Short Address Registers */ 20#define REG_RXMCR 0x00 /* Receive MAC control */ 21#define BIT_PROMI BIT(0) 22#define BIT_ERRPKT BIT(1) 23#define BIT_NOACKRSP BIT(5) 24#define BIT_PANCOORD BIT(3) 25 26#define REG_PANIDL 0x01 /* PAN ID (low) */ 27#define REG_PANIDH 0x02 /* PAN ID (high) */ 28#define REG_SADRL 0x03 /* Short address (low) */ 29#define REG_SADRH 0x04 /* Short address (high) */ 30#define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */ 31#define REG_EADR1 0x06 32#define REG_EADR2 0x07 33#define REG_EADR3 0x08 34#define REG_EADR4 0x09 35#define REG_EADR5 0x0A 36#define REG_EADR6 0x0B 37#define REG_EADR7 0x0C 38#define REG_RXFLUSH 0x0D 39#define REG_ORDER 0x10 40#define REG_TXMCR 0x11 /* Transmit MAC control */ 41#define TXMCR_MIN_BE_SHIFT 3 42#define TXMCR_MIN_BE_MASK 0x18 43#define TXMCR_CSMA_RETRIES_SHIFT 0 44#define TXMCR_CSMA_RETRIES_MASK 0x07 45 46#define REG_ACKTMOUT 0x12 47#define REG_ESLOTG1 0x13 48#define REG_SYMTICKL 0x14 49#define REG_SYMTICKH 0x15 50#define REG_PACON0 0x16 /* Power Amplifier Control */ 51#define REG_PACON1 0x17 /* Power Amplifier Control */ 52#define REG_PACON2 0x18 /* Power Amplifier Control */ 53#define REG_TXBCON0 0x1A 54#define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */ 55#define BIT_TXNTRIG BIT(0) 56#define BIT_TXNSECEN BIT(1) 57#define BIT_TXNACKREQ BIT(2) 58 59#define REG_TXG1CON 0x1C 60#define REG_TXG2CON 0x1D 61#define REG_ESLOTG23 0x1E 62#define REG_ESLOTG45 0x1F 63#define REG_ESLOTG67 0x20 64#define REG_TXPEND 0x21 65#define REG_WAKECON 0x22 66#define REG_FROMOFFSET 0x23 67#define REG_TXSTAT 0x24 /* TX MAC Status Register */ 68#define REG_TXBCON1 0x25 69#define REG_GATECLK 0x26 70#define REG_TXTIME 0x27 71#define REG_HSYMTMRL 0x28 72#define REG_HSYMTMRH 0x29 73#define REG_SOFTRST 0x2A /* Soft Reset */ 74#define REG_SECCON0 0x2C 75#define REG_SECCON1 0x2D 76#define REG_TXSTBL 0x2E /* TX Stabilization */ 77#define REG_RXSR 0x30 78#define REG_INTSTAT 0x31 /* Interrupt Status */ 79#define BIT_TXNIF BIT(0) 80#define BIT_RXIF BIT(3) 81#define BIT_SECIF BIT(4) 82#define BIT_SECIGNORE BIT(7) 83 84#define REG_INTCON 0x32 /* Interrupt Control */ 85#define BIT_TXNIE BIT(0) 86#define BIT_RXIE BIT(3) 87#define BIT_SECIE BIT(4) 88 89#define REG_GPIO 0x33 /* GPIO */ 90#define REG_TRISGPIO 0x34 /* GPIO direction */ 91#define REG_SLPACK 0x35 92#define REG_RFCTL 0x36 /* RF Control Mode Register */ 93#define BIT_RFRST BIT(2) 94 95#define REG_SECCR2 0x37 96#define REG_BBREG0 0x38 97#define REG_BBREG1 0x39 /* Baseband Registers */ 98#define BIT_RXDECINV BIT(2) 99 100#define REG_BBREG2 0x3A /* */ 101#define BBREG2_CCA_MODE_SHIFT 6 102#define BBREG2_CCA_MODE_MASK 0xc0 103 104#define REG_BBREG3 0x3B 105#define REG_BBREG4 0x3C 106#define REG_BBREG6 0x3E /* */ 107#define REG_CCAEDTH 0x3F /* Energy Detection Threshold */ 108 109/* MRF24J40 Long Address Registers */ 110#define REG_RFCON0 0x200 /* RF Control Registers */ 111#define RFCON0_CH_SHIFT 4 112#define RFCON0_CH_MASK 0xf0 113#define RFOPT_RECOMMEND 3 114 115#define REG_RFCON1 0x201 116#define REG_RFCON2 0x202 117#define REG_RFCON3 0x203 118 119#define TXPWRL_MASK 0xc0 120#define TXPWRL_SHIFT 6 121#define TXPWRL_30 0x3 122#define TXPWRL_20 0x2 123#define TXPWRL_10 0x1 124#define TXPWRL_0 0x0 125 126#define TXPWRS_MASK 0x38 127#define TXPWRS_SHIFT 3 128#define TXPWRS_6_3 0x7 129#define TXPWRS_4_9 0x6 130#define TXPWRS_3_7 0x5 131#define TXPWRS_2_8 0x4 132#define TXPWRS_1_9 0x3 133#define TXPWRS_1_2 0x2 134#define TXPWRS_0_5 0x1 135#define TXPWRS_0 0x0 136 137#define REG_RFCON5 0x205 138#define REG_RFCON6 0x206 139#define REG_RFCON7 0x207 140#define REG_RFCON8 0x208 141#define REG_SLPCAL0 0x209 142#define REG_SLPCAL1 0x20A 143#define REG_SLPCAL2 0x20B 144#define REG_RFSTATE 0x20F 145#define REG_RSSI 0x210 146#define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */ 147#define BIT_INTEDGE BIT(1) 148 149#define REG_SLPCON1 0x220 150#define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */ 151#define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */ 152#define REG_REMCNTL 0x224 153#define REG_REMCNTH 0x225 154#define REG_MAINCNT0 0x226 155#define REG_MAINCNT1 0x227 156#define REG_MAINCNT2 0x228 157#define REG_MAINCNT3 0x229 158#define REG_TESTMODE 0x22F /* Test mode */ 159#define REG_ASSOEAR0 0x230 160#define REG_ASSOEAR1 0x231 161#define REG_ASSOEAR2 0x232 162#define REG_ASSOEAR3 0x233 163#define REG_ASSOEAR4 0x234 164#define REG_ASSOEAR5 0x235 165#define REG_ASSOEAR6 0x236 166#define REG_ASSOEAR7 0x237 167#define REG_ASSOSAR0 0x238 168#define REG_ASSOSAR1 0x239 169#define REG_UNONCE0 0x240 170#define REG_UNONCE1 0x241 171#define REG_UNONCE2 0x242 172#define REG_UNONCE3 0x243 173#define REG_UNONCE4 0x244 174#define REG_UNONCE5 0x245 175#define REG_UNONCE6 0x246 176#define REG_UNONCE7 0x247 177#define REG_UNONCE8 0x248 178#define REG_UNONCE9 0x249 179#define REG_UNONCE10 0x24A 180#define REG_UNONCE11 0x24B 181#define REG_UNONCE12 0x24C 182#define REG_RX_FIFO 0x300 /* Receive FIFO */ 183 184/* Device configuration: Only channels 11-26 on page 0 are supported. */ 185#define MRF24J40_CHAN_MIN 11 186#define MRF24J40_CHAN_MAX 26 187#define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \ 188 - ((u32)1 << MRF24J40_CHAN_MIN)) 189 190#define TX_FIFO_SIZE 128 /* From datasheet */ 191#define RX_FIFO_SIZE 144 /* From datasheet */ 192#define SET_CHANNEL_DELAY_US 192 /* From datasheet */ 193 194enum mrf24j40_modules { MRF24J40, MRF24J40MA, MRF24J40MC }; 195 196/* Device Private Data */ 197struct mrf24j40 { 198 struct spi_device *spi; 199 struct ieee802154_hw *hw; 200 201 struct regmap *regmap_short; 202 struct regmap *regmap_long; 203 204 /* for writing txfifo */ 205 struct spi_message tx_msg; 206 u8 tx_hdr_buf[2]; 207 struct spi_transfer tx_hdr_trx; 208 u8 tx_len_buf[2]; 209 struct spi_transfer tx_len_trx; 210 struct spi_transfer tx_buf_trx; 211 struct sk_buff *tx_skb; 212 213 /* post transmit message to send frame out */ 214 struct spi_message tx_post_msg; 215 u8 tx_post_buf[2]; 216 struct spi_transfer tx_post_trx; 217 218 /* for protect/unprotect/read length rxfifo */ 219 struct spi_message rx_msg; 220 u8 rx_buf[3]; 221 struct spi_transfer rx_trx; 222 223 /* receive handling */ 224 struct spi_message rx_buf_msg; 225 u8 rx_addr_buf[2]; 226 struct spi_transfer rx_addr_trx; 227 u8 rx_lqi_buf[2]; 228 struct spi_transfer rx_lqi_trx; 229 u8 rx_fifo_buf[RX_FIFO_SIZE]; 230 struct spi_transfer rx_fifo_buf_trx; 231 232 /* isr handling for reading intstat */ 233 struct spi_message irq_msg; 234 u8 irq_buf[2]; 235 struct spi_transfer irq_trx; 236}; 237 238/* regmap information for short address register access */ 239#define MRF24J40_SHORT_WRITE 0x01 240#define MRF24J40_SHORT_READ 0x00 241#define MRF24J40_SHORT_NUMREGS 0x3F 242 243/* regmap information for long address register access */ 244#define MRF24J40_LONG_ACCESS 0x80 245#define MRF24J40_LONG_NUMREGS 0x38F 246 247/* Read/Write SPI Commands for Short and Long Address registers. */ 248#define MRF24J40_READSHORT(reg) ((reg) << 1) 249#define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1) 250#define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5) 251#define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4) 252 253/* The datasheet indicates the theoretical maximum for SCK to be 10MHz */ 254#define MAX_SPI_SPEED_HZ 10000000 255 256#define printdev(X) (&X->spi->dev) 257 258static bool 259mrf24j40_short_reg_writeable(struct device *dev, unsigned int reg) 260{ 261 switch (reg) { 262 case REG_RXMCR: 263 case REG_PANIDL: 264 case REG_PANIDH: 265 case REG_SADRL: 266 case REG_SADRH: 267 case REG_EADR0: 268 case REG_EADR1: 269 case REG_EADR2: 270 case REG_EADR3: 271 case REG_EADR4: 272 case REG_EADR5: 273 case REG_EADR6: 274 case REG_EADR7: 275 case REG_RXFLUSH: 276 case REG_ORDER: 277 case REG_TXMCR: 278 case REG_ACKTMOUT: 279 case REG_ESLOTG1: 280 case REG_SYMTICKL: 281 case REG_SYMTICKH: 282 case REG_PACON0: 283 case REG_PACON1: 284 case REG_PACON2: 285 case REG_TXBCON0: 286 case REG_TXNCON: 287 case REG_TXG1CON: 288 case REG_TXG2CON: 289 case REG_ESLOTG23: 290 case REG_ESLOTG45: 291 case REG_ESLOTG67: 292 case REG_TXPEND: 293 case REG_WAKECON: 294 case REG_FROMOFFSET: 295 case REG_TXBCON1: 296 case REG_GATECLK: 297 case REG_TXTIME: 298 case REG_HSYMTMRL: 299 case REG_HSYMTMRH: 300 case REG_SOFTRST: 301 case REG_SECCON0: 302 case REG_SECCON1: 303 case REG_TXSTBL: 304 case REG_RXSR: 305 case REG_INTCON: 306 case REG_TRISGPIO: 307 case REG_GPIO: 308 case REG_RFCTL: 309 case REG_SECCR2: 310 case REG_SLPACK: 311 case REG_BBREG0: 312 case REG_BBREG1: 313 case REG_BBREG2: 314 case REG_BBREG3: 315 case REG_BBREG4: 316 case REG_BBREG6: 317 case REG_CCAEDTH: 318 return true; 319 default: 320 return false; 321 } 322} 323 324static bool 325mrf24j40_short_reg_readable(struct device *dev, unsigned int reg) 326{ 327 bool rc; 328 329 /* all writeable are also readable */ 330 rc = mrf24j40_short_reg_writeable(dev, reg); 331 if (rc) 332 return rc; 333 334 /* readonly regs */ 335 switch (reg) { 336 case REG_TXSTAT: 337 case REG_INTSTAT: 338 return true; 339 default: 340 return false; 341 } 342} 343 344static bool 345mrf24j40_short_reg_volatile(struct device *dev, unsigned int reg) 346{ 347 /* can be changed during runtime */ 348 switch (reg) { 349 case REG_TXSTAT: 350 case REG_INTSTAT: 351 case REG_RXFLUSH: 352 case REG_TXNCON: 353 case REG_SOFTRST: 354 case REG_RFCTL: 355 case REG_TXBCON0: 356 case REG_TXG1CON: 357 case REG_TXG2CON: 358 case REG_TXBCON1: 359 case REG_SECCON0: 360 case REG_RXSR: 361 case REG_SLPACK: 362 case REG_SECCR2: 363 case REG_BBREG6: 364 /* use them in spi_async and regmap so it's volatile */ 365 case REG_BBREG1: 366 return true; 367 default: 368 return false; 369 } 370} 371 372static bool 373mrf24j40_short_reg_precious(struct device *dev, unsigned int reg) 374{ 375 /* don't clear irq line on read */ 376 switch (reg) { 377 case REG_INTSTAT: 378 return true; 379 default: 380 return false; 381 } 382} 383 384static const struct regmap_config mrf24j40_short_regmap = { 385 .name = "mrf24j40_short", 386 .reg_bits = 7, 387 .val_bits = 8, 388 .pad_bits = 1, 389 .write_flag_mask = MRF24J40_SHORT_WRITE, 390 .read_flag_mask = MRF24J40_SHORT_READ, 391 .cache_type = REGCACHE_MAPLE, 392 .max_register = MRF24J40_SHORT_NUMREGS, 393 .writeable_reg = mrf24j40_short_reg_writeable, 394 .readable_reg = mrf24j40_short_reg_readable, 395 .volatile_reg = mrf24j40_short_reg_volatile, 396 .precious_reg = mrf24j40_short_reg_precious, 397}; 398 399static bool 400mrf24j40_long_reg_writeable(struct device *dev, unsigned int reg) 401{ 402 switch (reg) { 403 case REG_RFCON0: 404 case REG_RFCON1: 405 case REG_RFCON2: 406 case REG_RFCON3: 407 case REG_RFCON5: 408 case REG_RFCON6: 409 case REG_RFCON7: 410 case REG_RFCON8: 411 case REG_SLPCAL2: 412 case REG_SLPCON0: 413 case REG_SLPCON1: 414 case REG_WAKETIMEL: 415 case REG_WAKETIMEH: 416 case REG_REMCNTL: 417 case REG_REMCNTH: 418 case REG_MAINCNT0: 419 case REG_MAINCNT1: 420 case REG_MAINCNT2: 421 case REG_MAINCNT3: 422 case REG_TESTMODE: 423 case REG_ASSOEAR0: 424 case REG_ASSOEAR1: 425 case REG_ASSOEAR2: 426 case REG_ASSOEAR3: 427 case REG_ASSOEAR4: 428 case REG_ASSOEAR5: 429 case REG_ASSOEAR6: 430 case REG_ASSOEAR7: 431 case REG_ASSOSAR0: 432 case REG_ASSOSAR1: 433 case REG_UNONCE0: 434 case REG_UNONCE1: 435 case REG_UNONCE2: 436 case REG_UNONCE3: 437 case REG_UNONCE4: 438 case REG_UNONCE5: 439 case REG_UNONCE6: 440 case REG_UNONCE7: 441 case REG_UNONCE8: 442 case REG_UNONCE9: 443 case REG_UNONCE10: 444 case REG_UNONCE11: 445 case REG_UNONCE12: 446 return true; 447 default: 448 return false; 449 } 450} 451 452static bool 453mrf24j40_long_reg_readable(struct device *dev, unsigned int reg) 454{ 455 bool rc; 456 457 /* all writeable are also readable */ 458 rc = mrf24j40_long_reg_writeable(dev, reg); 459 if (rc) 460 return rc; 461 462 /* readonly regs */ 463 switch (reg) { 464 case REG_SLPCAL0: 465 case REG_SLPCAL1: 466 case REG_RFSTATE: 467 case REG_RSSI: 468 return true; 469 default: 470 return false; 471 } 472} 473 474static bool 475mrf24j40_long_reg_volatile(struct device *dev, unsigned int reg) 476{ 477 /* can be changed during runtime */ 478 switch (reg) { 479 case REG_SLPCAL0: 480 case REG_SLPCAL1: 481 case REG_SLPCAL2: 482 case REG_RFSTATE: 483 case REG_RSSI: 484 case REG_MAINCNT3: 485 return true; 486 default: 487 return false; 488 } 489} 490 491static const struct regmap_config mrf24j40_long_regmap = { 492 .name = "mrf24j40_long", 493 .reg_bits = 11, 494 .val_bits = 8, 495 .pad_bits = 5, 496 .write_flag_mask = MRF24J40_LONG_ACCESS, 497 .read_flag_mask = MRF24J40_LONG_ACCESS, 498 .cache_type = REGCACHE_MAPLE, 499 .max_register = MRF24J40_LONG_NUMREGS, 500 .writeable_reg = mrf24j40_long_reg_writeable, 501 .readable_reg = mrf24j40_long_reg_readable, 502 .volatile_reg = mrf24j40_long_reg_volatile, 503}; 504 505static int mrf24j40_long_regmap_write(void *context, const void *data, 506 size_t count) 507{ 508 struct spi_device *spi = context; 509 u8 buf[3]; 510 511 if (count > 3) 512 return -EINVAL; 513 514 /* regmap supports read/write mask only in frist byte 515 * long write access need to set the 12th bit, so we 516 * make special handling for write. 517 */ 518 memcpy(buf, data, count); 519 buf[1] |= (1 << 4); 520 521 return spi_write(spi, buf, count); 522} 523 524static int 525mrf24j40_long_regmap_read(void *context, const void *reg, size_t reg_size, 526 void *val, size_t val_size) 527{ 528 struct spi_device *spi = context; 529 530 return spi_write_then_read(spi, reg, reg_size, val, val_size); 531} 532 533static const struct regmap_bus mrf24j40_long_regmap_bus = { 534 .write = mrf24j40_long_regmap_write, 535 .read = mrf24j40_long_regmap_read, 536 .reg_format_endian_default = REGMAP_ENDIAN_BIG, 537 .val_format_endian_default = REGMAP_ENDIAN_BIG, 538}; 539 540static void write_tx_buf_complete(void *context) 541{ 542 struct mrf24j40 *devrec = context; 543 __le16 fc = ieee802154_get_fc_from_skb(devrec->tx_skb); 544 u8 val = BIT_TXNTRIG; 545 int ret; 546 547 if (ieee802154_is_secen(fc)) 548 val |= BIT_TXNSECEN; 549 550 if (ieee802154_is_ackreq(fc)) 551 val |= BIT_TXNACKREQ; 552 553 devrec->tx_post_msg.complete = NULL; 554 devrec->tx_post_buf[0] = MRF24J40_WRITESHORT(REG_TXNCON); 555 devrec->tx_post_buf[1] = val; 556 557 ret = spi_async(devrec->spi, &devrec->tx_post_msg); 558 if (ret) 559 dev_err(printdev(devrec), "SPI write Failed for transmit buf\n"); 560} 561 562/* This function relies on an undocumented write method. Once a write command 563 and address is set, as many bytes of data as desired can be clocked into 564 the device. The datasheet only shows setting one byte at a time. */ 565static int write_tx_buf(struct mrf24j40 *devrec, u16 reg, 566 const u8 *data, size_t length) 567{ 568 u16 cmd; 569 int ret; 570 571 /* Range check the length. 2 bytes are used for the length fields.*/ 572 if (length > TX_FIFO_SIZE-2) { 573 dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n"); 574 length = TX_FIFO_SIZE-2; 575 } 576 577 cmd = MRF24J40_WRITELONG(reg); 578 devrec->tx_hdr_buf[0] = cmd >> 8 & 0xff; 579 devrec->tx_hdr_buf[1] = cmd & 0xff; 580 devrec->tx_len_buf[0] = 0x0; /* Header Length. Set to 0 for now. TODO */ 581 devrec->tx_len_buf[1] = length; /* Total length */ 582 devrec->tx_buf_trx.tx_buf = data; 583 devrec->tx_buf_trx.len = length; 584 585 ret = spi_async(devrec->spi, &devrec->tx_msg); 586 if (ret) 587 dev_err(printdev(devrec), "SPI write Failed for TX buf\n"); 588 589 return ret; 590} 591 592static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb) 593{ 594 struct mrf24j40 *devrec = hw->priv; 595 596 dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len); 597 devrec->tx_skb = skb; 598 599 return write_tx_buf(devrec, 0x000, skb->data, skb->len); 600} 601 602static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level) 603{ 604 /* TODO: */ 605 pr_warn("mrf24j40: ed not implemented\n"); 606 *level = 0; 607 return 0; 608} 609 610static int mrf24j40_start(struct ieee802154_hw *hw) 611{ 612 struct mrf24j40 *devrec = hw->priv; 613 614 dev_dbg(printdev(devrec), "start\n"); 615 616 /* Clear TXNIE and RXIE. Enable interrupts */ 617 return regmap_update_bits(devrec->regmap_short, REG_INTCON, 618 BIT_TXNIE | BIT_RXIE | BIT_SECIE, 0); 619} 620 621static void mrf24j40_stop(struct ieee802154_hw *hw) 622{ 623 struct mrf24j40 *devrec = hw->priv; 624 625 dev_dbg(printdev(devrec), "stop\n"); 626 627 /* Set TXNIE and RXIE. Disable Interrupts */ 628 regmap_update_bits(devrec->regmap_short, REG_INTCON, 629 BIT_TXNIE | BIT_RXIE, BIT_TXNIE | BIT_RXIE); 630} 631 632static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel) 633{ 634 struct mrf24j40 *devrec = hw->priv; 635 u8 val; 636 int ret; 637 638 dev_dbg(printdev(devrec), "Set Channel %d\n", channel); 639 640 WARN_ON(page != 0); 641 WARN_ON(channel < MRF24J40_CHAN_MIN); 642 WARN_ON(channel > MRF24J40_CHAN_MAX); 643 644 /* Set Channel TODO */ 645 val = (channel - 11) << RFCON0_CH_SHIFT | RFOPT_RECOMMEND; 646 ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0, 647 RFCON0_CH_MASK, val); 648 if (ret) 649 return ret; 650 651 /* RF Reset */ 652 ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 653 BIT_RFRST); 654 if (ret) 655 return ret; 656 657 ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 0); 658 if (!ret) 659 udelay(SET_CHANNEL_DELAY_US); /* per datasheet */ 660 661 return ret; 662} 663 664static int mrf24j40_filter(struct ieee802154_hw *hw, 665 struct ieee802154_hw_addr_filt *filt, 666 unsigned long changed) 667{ 668 struct mrf24j40 *devrec = hw->priv; 669 670 dev_dbg(printdev(devrec), "filter\n"); 671 672 if (changed & IEEE802154_AFILT_SADDR_CHANGED) { 673 /* Short Addr */ 674 u8 addrh, addrl; 675 676 addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff; 677 addrl = le16_to_cpu(filt->short_addr) & 0xff; 678 679 regmap_write(devrec->regmap_short, REG_SADRH, addrh); 680 regmap_write(devrec->regmap_short, REG_SADRL, addrl); 681 dev_dbg(printdev(devrec), 682 "Set short addr to %04hx\n", filt->short_addr); 683 } 684 685 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { 686 /* Device Address */ 687 u8 i, addr[8]; 688 689 memcpy(addr, &filt->ieee_addr, 8); 690 for (i = 0; i < 8; i++) 691 regmap_write(devrec->regmap_short, REG_EADR0 + i, 692 addr[i]); 693 694#ifdef DEBUG 695 pr_debug("Set long addr to: "); 696 for (i = 0; i < 8; i++) 697 pr_debug("%02hhx ", addr[7 - i]); 698 pr_debug("\n"); 699#endif 700 } 701 702 if (changed & IEEE802154_AFILT_PANID_CHANGED) { 703 /* PAN ID */ 704 u8 panidl, panidh; 705 706 panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff; 707 panidl = le16_to_cpu(filt->pan_id) & 0xff; 708 regmap_write(devrec->regmap_short, REG_PANIDH, panidh); 709 regmap_write(devrec->regmap_short, REG_PANIDL, panidl); 710 711 dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id); 712 } 713 714 if (changed & IEEE802154_AFILT_PANC_CHANGED) { 715 /* Pan Coordinator */ 716 u8 val; 717 int ret; 718 719 if (filt->pan_coord) 720 val = BIT_PANCOORD; 721 else 722 val = 0; 723 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 724 BIT_PANCOORD, val); 725 if (ret) 726 return ret; 727 728 /* REG_SLOTTED is maintained as default (unslotted/CSMA-CA). 729 * REG_ORDER is maintained as default (no beacon/superframe). 730 */ 731 732 dev_dbg(printdev(devrec), "Set Pan Coord to %s\n", 733 filt->pan_coord ? "on" : "off"); 734 } 735 736 return 0; 737} 738 739static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec) 740{ 741 int ret; 742 743 /* Turn back on reception of packets off the air. */ 744 devrec->rx_msg.complete = NULL; 745 devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); 746 devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */ 747 ret = spi_async(devrec->spi, &devrec->rx_msg); 748 if (ret) 749 dev_err(printdev(devrec), "failed to unlock rx buffer\n"); 750} 751 752static void mrf24j40_handle_rx_read_buf_complete(void *context) 753{ 754 struct mrf24j40 *devrec = context; 755 u8 len = devrec->rx_buf[2]; 756 u8 rx_local_buf[RX_FIFO_SIZE]; 757 struct sk_buff *skb; 758 759 memcpy(rx_local_buf, devrec->rx_fifo_buf, len); 760 mrf24j40_handle_rx_read_buf_unlock(devrec); 761 762 skb = dev_alloc_skb(IEEE802154_MTU); 763 if (!skb) { 764 dev_err(printdev(devrec), "failed to allocate skb\n"); 765 return; 766 } 767 768 skb_put_data(skb, rx_local_buf, len); 769 ieee802154_rx_irqsafe(devrec->hw, skb, 0); 770 771#ifdef DEBUG 772 print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1, 773 rx_local_buf, len, 0); 774 pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n", 775 devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]); 776#endif 777} 778 779static void mrf24j40_handle_rx_read_buf(void *context) 780{ 781 struct mrf24j40 *devrec = context; 782 u16 cmd; 783 int ret; 784 785 /* if length is invalid read the full MTU */ 786 if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2])) 787 devrec->rx_buf[2] = IEEE802154_MTU; 788 789 cmd = MRF24J40_READLONG(REG_RX_FIFO + 1); 790 devrec->rx_addr_buf[0] = cmd >> 8 & 0xff; 791 devrec->rx_addr_buf[1] = cmd & 0xff; 792 devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2]; 793 ret = spi_async(devrec->spi, &devrec->rx_buf_msg); 794 if (ret) { 795 dev_err(printdev(devrec), "failed to read rx buffer\n"); 796 mrf24j40_handle_rx_read_buf_unlock(devrec); 797 } 798} 799 800static void mrf24j40_handle_rx_read_len(void *context) 801{ 802 struct mrf24j40 *devrec = context; 803 u16 cmd; 804 int ret; 805 806 /* read the length of received frame */ 807 devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf; 808 devrec->rx_trx.len = 3; 809 cmd = MRF24J40_READLONG(REG_RX_FIFO); 810 devrec->rx_buf[0] = cmd >> 8 & 0xff; 811 devrec->rx_buf[1] = cmd & 0xff; 812 813 ret = spi_async(devrec->spi, &devrec->rx_msg); 814 if (ret) { 815 dev_err(printdev(devrec), "failed to read rx buffer length\n"); 816 mrf24j40_handle_rx_read_buf_unlock(devrec); 817 } 818} 819 820static int mrf24j40_handle_rx(struct mrf24j40 *devrec) 821{ 822 /* Turn off reception of packets off the air. This prevents the 823 * device from overwriting the buffer while we're reading it. 824 */ 825 devrec->rx_msg.complete = mrf24j40_handle_rx_read_len; 826 devrec->rx_trx.len = 2; 827 devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); 828 devrec->rx_buf[1] = BIT_RXDECINV; /* SET RXDECINV */ 829 830 return spi_async(devrec->spi, &devrec->rx_msg); 831} 832 833static int 834mrf24j40_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, 835 u8 retries) 836{ 837 struct mrf24j40 *devrec = hw->priv; 838 u8 val; 839 840 /* min_be */ 841 val = min_be << TXMCR_MIN_BE_SHIFT; 842 /* csma backoffs */ 843 val |= retries << TXMCR_CSMA_RETRIES_SHIFT; 844 845 return regmap_update_bits(devrec->regmap_short, REG_TXMCR, 846 TXMCR_MIN_BE_MASK | TXMCR_CSMA_RETRIES_MASK, 847 val); 848} 849 850static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw, 851 const struct wpan_phy_cca *cca) 852{ 853 struct mrf24j40 *devrec = hw->priv; 854 u8 val; 855 856 /* mapping 802.15.4 to driver spec */ 857 switch (cca->mode) { 858 case NL802154_CCA_ENERGY: 859 val = 2; 860 break; 861 case NL802154_CCA_CARRIER: 862 val = 1; 863 break; 864 case NL802154_CCA_ENERGY_CARRIER: 865 switch (cca->opt) { 866 case NL802154_CCA_OPT_ENERGY_CARRIER_AND: 867 val = 3; 868 break; 869 default: 870 return -EINVAL; 871 } 872 break; 873 default: 874 return -EINVAL; 875 } 876 877 return regmap_update_bits(devrec->regmap_short, REG_BBREG2, 878 BBREG2_CCA_MODE_MASK, 879 val << BBREG2_CCA_MODE_SHIFT); 880} 881 882/* array for representing ed levels */ 883static const s32 mrf24j40_ed_levels[] = { 884 -9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100, 885 -8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100, 886 -7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100, 887 -6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100, 888 -5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100, 889 -4000, -3900, -3800, -3700, -3600, -3500 890}; 891 892/* map ed levels to register value */ 893static const s32 mrf24j40_ed_levels_map[][2] = { 894 { -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 }, 895 { -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 }, 896 { -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 }, 897 { -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 }, 898 { -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 }, 899 { -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 }, 900 { -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 }, 901 { -6100, 133 }, { -6000, 138 }, { -5900, 143 }, { -5800, 148 }, 902 { -5700, 153 }, { -5600, 159 }, { -5500, 165 }, { -5400, 170 }, 903 { -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 }, 904 { -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 }, 905 { -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 }, 906 { -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 }, 907 { -3700, 253 }, { -3600, 254 }, { -3500, 255 }, 908}; 909 910static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) 911{ 912 struct mrf24j40 *devrec = hw->priv; 913 int i; 914 915 for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) { 916 if (mrf24j40_ed_levels_map[i][0] == mbm) 917 return regmap_write(devrec->regmap_short, REG_CCAEDTH, 918 mrf24j40_ed_levels_map[i][1]); 919 } 920 921 return -EINVAL; 922} 923 924static const s32 mrf24j40ma_powers[] = { 925 0, -50, -120, -190, -280, -370, -490, -630, -1000, -1050, -1120, -1190, 926 -1280, -1370, -1490, -1630, -2000, -2050, -2120, -2190, -2280, -2370, 927 -2490, -2630, -3000, -3050, -3120, -3190, -3280, -3370, -3490, -3630, 928}; 929 930static int mrf24j40_set_txpower(struct ieee802154_hw *hw, s32 mbm) 931{ 932 struct mrf24j40 *devrec = hw->priv; 933 s32 small_scale; 934 u8 val; 935 936 if (0 >= mbm && mbm > -1000) { 937 val = TXPWRL_0 << TXPWRL_SHIFT; 938 small_scale = mbm; 939 } else if (-1000 >= mbm && mbm > -2000) { 940 val = TXPWRL_10 << TXPWRL_SHIFT; 941 small_scale = mbm + 1000; 942 } else if (-2000 >= mbm && mbm > -3000) { 943 val = TXPWRL_20 << TXPWRL_SHIFT; 944 small_scale = mbm + 2000; 945 } else if (-3000 >= mbm && mbm > -4000) { 946 val = TXPWRL_30 << TXPWRL_SHIFT; 947 small_scale = mbm + 3000; 948 } else { 949 return -EINVAL; 950 } 951 952 switch (small_scale) { 953 case 0: 954 val |= (TXPWRS_0 << TXPWRS_SHIFT); 955 break; 956 case -50: 957 val |= (TXPWRS_0_5 << TXPWRS_SHIFT); 958 break; 959 case -120: 960 val |= (TXPWRS_1_2 << TXPWRS_SHIFT); 961 break; 962 case -190: 963 val |= (TXPWRS_1_9 << TXPWRS_SHIFT); 964 break; 965 case -280: 966 val |= (TXPWRS_2_8 << TXPWRS_SHIFT); 967 break; 968 case -370: 969 val |= (TXPWRS_3_7 << TXPWRS_SHIFT); 970 break; 971 case -490: 972 val |= (TXPWRS_4_9 << TXPWRS_SHIFT); 973 break; 974 case -630: 975 val |= (TXPWRS_6_3 << TXPWRS_SHIFT); 976 break; 977 default: 978 return -EINVAL; 979 } 980 981 return regmap_update_bits(devrec->regmap_long, REG_RFCON3, 982 TXPWRL_MASK | TXPWRS_MASK, val); 983} 984 985static int mrf24j40_set_promiscuous_mode(struct ieee802154_hw *hw, bool on) 986{ 987 struct mrf24j40 *devrec = hw->priv; 988 int ret; 989 990 if (on) { 991 /* set PROMI, ERRPKT and NOACKRSP */ 992 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 993 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP, 994 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP); 995 } else { 996 /* clear PROMI, ERRPKT and NOACKRSP */ 997 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 998 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP, 999 0); 1000 } 1001 1002 return ret; 1003} 1004 1005static const struct ieee802154_ops mrf24j40_ops = { 1006 .owner = THIS_MODULE, 1007 .xmit_async = mrf24j40_tx, 1008 .ed = mrf24j40_ed, 1009 .start = mrf24j40_start, 1010 .stop = mrf24j40_stop, 1011 .set_channel = mrf24j40_set_channel, 1012 .set_hw_addr_filt = mrf24j40_filter, 1013 .set_csma_params = mrf24j40_csma_params, 1014 .set_cca_mode = mrf24j40_set_cca_mode, 1015 .set_cca_ed_level = mrf24j40_set_cca_ed_level, 1016 .set_txpower = mrf24j40_set_txpower, 1017 .set_promiscuous_mode = mrf24j40_set_promiscuous_mode, 1018}; 1019 1020static void mrf24j40_intstat_complete(void *context) 1021{ 1022 struct mrf24j40 *devrec = context; 1023 u8 intstat = devrec->irq_buf[1]; 1024 1025 enable_irq(devrec->spi->irq); 1026 1027 /* Ignore Rx security decryption */ 1028 if (intstat & BIT_SECIF) 1029 regmap_write_async(devrec->regmap_short, REG_SECCON0, 1030 BIT_SECIGNORE); 1031 1032 /* Check for TX complete */ 1033 if (intstat & BIT_TXNIF) 1034 ieee802154_xmit_complete(devrec->hw, devrec->tx_skb, false); 1035 1036 /* Check for Rx */ 1037 if (intstat & BIT_RXIF) 1038 mrf24j40_handle_rx(devrec); 1039} 1040 1041static irqreturn_t mrf24j40_isr(int irq, void *data) 1042{ 1043 struct mrf24j40 *devrec = data; 1044 int ret; 1045 1046 disable_irq_nosync(irq); 1047 1048 devrec->irq_buf[0] = MRF24J40_READSHORT(REG_INTSTAT); 1049 devrec->irq_buf[1] = 0; 1050 1051 /* Read the interrupt status */ 1052 ret = spi_async(devrec->spi, &devrec->irq_msg); 1053 if (ret) { 1054 enable_irq(irq); 1055 return IRQ_NONE; 1056 } 1057 1058 return IRQ_HANDLED; 1059} 1060 1061static int mrf24j40_hw_init(struct mrf24j40 *devrec) 1062{ 1063 u32 irq_type; 1064 int ret; 1065 1066 /* Initialize the device. 1067 From datasheet section 3.2: Initialization. */ 1068 ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07); 1069 if (ret) 1070 goto err_ret; 1071 1072 ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98); 1073 if (ret) 1074 goto err_ret; 1075 1076 ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95); 1077 if (ret) 1078 goto err_ret; 1079 1080 ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03); 1081 if (ret) 1082 goto err_ret; 1083 1084 ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01); 1085 if (ret) 1086 goto err_ret; 1087 1088 ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80); 1089 if (ret) 1090 goto err_ret; 1091 1092 ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90); 1093 if (ret) 1094 goto err_ret; 1095 1096 ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80); 1097 if (ret) 1098 goto err_ret; 1099 1100 ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10); 1101 if (ret) 1102 goto err_ret; 1103 1104 ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21); 1105 if (ret) 1106 goto err_ret; 1107 1108 ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80); 1109 if (ret) 1110 goto err_ret; 1111 1112 ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60); 1113 if (ret) 1114 goto err_ret; 1115 1116 ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40); 1117 if (ret) 1118 goto err_ret; 1119 1120 ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04); 1121 if (ret) 1122 goto err_ret; 1123 1124 ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0); 1125 if (ret) 1126 goto err_ret; 1127 1128 udelay(192); 1129 1130 /* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */ 1131 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00); 1132 if (ret) 1133 goto err_ret; 1134 1135 if (spi_get_device_id(devrec->spi)->driver_data == MRF24J40MC) { 1136 /* Enable external amplifier. 1137 * From MRF24J40MC datasheet section 1.3: Operation. 1138 */ 1139 regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07, 1140 0x07); 1141 1142 /* Set GPIO3 as output. */ 1143 regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08, 1144 0x08); 1145 1146 /* Set GPIO3 HIGH to enable U5 voltage regulator */ 1147 regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08); 1148 1149 /* Reduce TX pwr to meet FCC requirements. 1150 * From MRF24J40MC datasheet section 3.1.1 1151 */ 1152 regmap_write(devrec->regmap_long, REG_RFCON3, 0x28); 1153 } 1154 1155 irq_type = irq_get_trigger_type(devrec->spi->irq); 1156 if (irq_type == IRQ_TYPE_EDGE_RISING || 1157 irq_type == IRQ_TYPE_EDGE_FALLING) 1158 dev_warn(&devrec->spi->dev, 1159 "Using edge triggered irq's are not recommended, because it can cause races and result in a non-functional driver!\n"); 1160 switch (irq_type) { 1161 case IRQ_TYPE_EDGE_RISING: 1162 case IRQ_TYPE_LEVEL_HIGH: 1163 /* set interrupt polarity to rising */ 1164 ret = regmap_update_bits(devrec->regmap_long, REG_SLPCON0, 1165 BIT_INTEDGE, BIT_INTEDGE); 1166 if (ret) 1167 goto err_ret; 1168 break; 1169 default: 1170 /* default is falling edge */ 1171 break; 1172 } 1173 1174 return 0; 1175 1176err_ret: 1177 return ret; 1178} 1179 1180static void 1181mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec) 1182{ 1183 spi_message_init(&devrec->tx_msg); 1184 devrec->tx_msg.context = devrec; 1185 devrec->tx_msg.complete = write_tx_buf_complete; 1186 devrec->tx_hdr_trx.len = 2; 1187 devrec->tx_hdr_trx.tx_buf = devrec->tx_hdr_buf; 1188 spi_message_add_tail(&devrec->tx_hdr_trx, &devrec->tx_msg); 1189 devrec->tx_len_trx.len = 2; 1190 devrec->tx_len_trx.tx_buf = devrec->tx_len_buf; 1191 spi_message_add_tail(&devrec->tx_len_trx, &devrec->tx_msg); 1192 spi_message_add_tail(&devrec->tx_buf_trx, &devrec->tx_msg); 1193 1194 spi_message_init(&devrec->tx_post_msg); 1195 devrec->tx_post_msg.context = devrec; 1196 devrec->tx_post_trx.len = 2; 1197 devrec->tx_post_trx.tx_buf = devrec->tx_post_buf; 1198 spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg); 1199} 1200 1201static void 1202mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec) 1203{ 1204 spi_message_init(&devrec->rx_msg); 1205 devrec->rx_msg.context = devrec; 1206 devrec->rx_trx.len = 2; 1207 devrec->rx_trx.tx_buf = devrec->rx_buf; 1208 devrec->rx_trx.rx_buf = devrec->rx_buf; 1209 spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg); 1210 1211 spi_message_init(&devrec->rx_buf_msg); 1212 devrec->rx_buf_msg.context = devrec; 1213 devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete; 1214 devrec->rx_addr_trx.len = 2; 1215 devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf; 1216 spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg); 1217 devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf; 1218 spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg); 1219 devrec->rx_lqi_trx.len = 2; 1220 devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf; 1221 spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg); 1222} 1223 1224static void 1225mrf24j40_setup_irq_spi_messages(struct mrf24j40 *devrec) 1226{ 1227 spi_message_init(&devrec->irq_msg); 1228 devrec->irq_msg.context = devrec; 1229 devrec->irq_msg.complete = mrf24j40_intstat_complete; 1230 devrec->irq_trx.len = 2; 1231 devrec->irq_trx.tx_buf = devrec->irq_buf; 1232 devrec->irq_trx.rx_buf = devrec->irq_buf; 1233 spi_message_add_tail(&devrec->irq_trx, &devrec->irq_msg); 1234} 1235 1236static void mrf24j40_phy_setup(struct mrf24j40 *devrec) 1237{ 1238 ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr); 1239 devrec->hw->phy->current_channel = 11; 1240 1241 /* mrf24j40 supports max_minbe 0 - 3 */ 1242 devrec->hw->phy->supported.max_minbe = 3; 1243 /* datasheet doesn't say anything about max_be, but we have min_be 1244 * So we assume the max_be default. 1245 */ 1246 devrec->hw->phy->supported.min_maxbe = 5; 1247 devrec->hw->phy->supported.max_maxbe = 5; 1248 1249 devrec->hw->phy->cca.mode = NL802154_CCA_CARRIER; 1250 devrec->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) | 1251 BIT(NL802154_CCA_CARRIER) | 1252 BIT(NL802154_CCA_ENERGY_CARRIER); 1253 devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND); 1254 1255 devrec->hw->phy->cca_ed_level = -6900; 1256 devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels; 1257 devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels); 1258 1259 switch (spi_get_device_id(devrec->spi)->driver_data) { 1260 case MRF24J40: 1261 case MRF24J40MA: 1262 devrec->hw->phy->supported.tx_powers = mrf24j40ma_powers; 1263 devrec->hw->phy->supported.tx_powers_size = ARRAY_SIZE(mrf24j40ma_powers); 1264 devrec->hw->phy->flags |= WPAN_PHY_FLAG_TXPOWER; 1265 break; 1266 default: 1267 break; 1268 } 1269} 1270 1271static int mrf24j40_probe(struct spi_device *spi) 1272{ 1273 int ret = -ENOMEM, irq_type; 1274 struct ieee802154_hw *hw; 1275 struct mrf24j40 *devrec; 1276 1277 dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq); 1278 1279 /* Register with the 802154 subsystem */ 1280 1281 hw = ieee802154_alloc_hw(sizeof(*devrec), &mrf24j40_ops); 1282 if (!hw) 1283 goto err_ret; 1284 1285 devrec = hw->priv; 1286 devrec->spi = spi; 1287 spi_set_drvdata(spi, devrec); 1288 devrec->hw = hw; 1289 devrec->hw->parent = &spi->dev; 1290 devrec->hw->phy->supported.channels[0] = CHANNEL_MASK; 1291 devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT | 1292 IEEE802154_HW_CSMA_PARAMS | 1293 IEEE802154_HW_PROMISCUOUS; 1294 1295 devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE | 1296 WPAN_PHY_FLAG_CCA_ED_LEVEL; 1297 1298 mrf24j40_setup_tx_spi_messages(devrec); 1299 mrf24j40_setup_rx_spi_messages(devrec); 1300 mrf24j40_setup_irq_spi_messages(devrec); 1301 1302 devrec->regmap_short = devm_regmap_init_spi(spi, 1303 &mrf24j40_short_regmap); 1304 if (IS_ERR(devrec->regmap_short)) { 1305 ret = PTR_ERR(devrec->regmap_short); 1306 dev_err(&spi->dev, "Failed to allocate short register map: %d\n", 1307 ret); 1308 goto err_register_device; 1309 } 1310 1311 devrec->regmap_long = devm_regmap_init(&spi->dev, 1312 &mrf24j40_long_regmap_bus, 1313 spi, &mrf24j40_long_regmap); 1314 if (IS_ERR(devrec->regmap_long)) { 1315 ret = PTR_ERR(devrec->regmap_long); 1316 dev_err(&spi->dev, "Failed to allocate long register map: %d\n", 1317 ret); 1318 goto err_register_device; 1319 } 1320 1321 if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) { 1322 dev_warn(&spi->dev, "spi clock above possible maximum: %d", 1323 MAX_SPI_SPEED_HZ); 1324 ret = -EINVAL; 1325 goto err_register_device; 1326 } 1327 1328 ret = mrf24j40_hw_init(devrec); 1329 if (ret) 1330 goto err_register_device; 1331 1332 mrf24j40_phy_setup(devrec); 1333 1334 /* request IRQF_TRIGGER_LOW as fallback default */ 1335 irq_type = irq_get_trigger_type(spi->irq); 1336 if (!irq_type) 1337 irq_type = IRQF_TRIGGER_LOW; 1338 1339 ret = devm_request_irq(&spi->dev, spi->irq, mrf24j40_isr, 1340 irq_type, dev_name(&spi->dev), devrec); 1341 if (ret) { 1342 dev_err(printdev(devrec), "Unable to get IRQ"); 1343 goto err_register_device; 1344 } 1345 1346 dev_dbg(printdev(devrec), "registered mrf24j40\n"); 1347 ret = ieee802154_register_hw(devrec->hw); 1348 if (ret) 1349 goto err_register_device; 1350 1351 return 0; 1352 1353err_register_device: 1354 ieee802154_free_hw(devrec->hw); 1355err_ret: 1356 return ret; 1357} 1358 1359static void mrf24j40_remove(struct spi_device *spi) 1360{ 1361 struct mrf24j40 *devrec = spi_get_drvdata(spi); 1362 1363 dev_dbg(printdev(devrec), "remove\n"); 1364 1365 ieee802154_unregister_hw(devrec->hw); 1366 ieee802154_free_hw(devrec->hw); 1367 /* TODO: Will ieee802154_free_device() wait until ->xmit() is 1368 * complete? */ 1369} 1370 1371static const struct of_device_id mrf24j40_of_match[] = { 1372 { .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 }, 1373 { .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA }, 1374 { .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC }, 1375 { }, 1376}; 1377MODULE_DEVICE_TABLE(of, mrf24j40_of_match); 1378 1379static const struct spi_device_id mrf24j40_ids[] = { 1380 { "mrf24j40", MRF24J40 }, 1381 { "mrf24j40ma", MRF24J40MA }, 1382 { "mrf24j40mc", MRF24J40MC }, 1383 { }, 1384}; 1385MODULE_DEVICE_TABLE(spi, mrf24j40_ids); 1386 1387static struct spi_driver mrf24j40_driver = { 1388 .driver = { 1389 .of_match_table = mrf24j40_of_match, 1390 .name = "mrf24j40", 1391 }, 1392 .id_table = mrf24j40_ids, 1393 .probe = mrf24j40_probe, 1394 .remove = mrf24j40_remove, 1395}; 1396 1397module_spi_driver(mrf24j40_driver); 1398 1399MODULE_LICENSE("GPL"); 1400MODULE_AUTHOR("Alan Ott"); 1401MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver"); 1402