1// SPDX-License-Identifier: GPL-2.0
2/* Copyright (c) 2020, Loongson Corporation
3 */
4
5#include <linux/clk-provider.h>
6#include <linux/pci.h>
7#include <linux/dmi.h>
8#include <linux/device.h>
9#include <linux/of_irq.h>
10#include "stmmac.h"
11
12static int loongson_default_data(struct plat_stmmacenet_data *plat)
13{
14	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
15	plat->has_gmac = 1;
16	plat->force_sf_dma_mode = 1;
17
18	/* Set default value for multicast hash bins */
19	plat->multicast_filter_bins = HASH_TABLE_SIZE;
20
21	/* Set default value for unicast filter entries */
22	plat->unicast_filter_entries = 1;
23
24	/* Set the maxmtu to a default of JUMBO_LEN */
25	plat->maxmtu = JUMBO_LEN;
26
27	/* Set default number of RX and TX queues to use */
28	plat->tx_queues_to_use = 1;
29	plat->rx_queues_to_use = 1;
30
31	/* Disable Priority config by default */
32	plat->tx_queues_cfg[0].use_prio = false;
33	plat->rx_queues_cfg[0].use_prio = false;
34
35	/* Disable RX queues routing by default */
36	plat->rx_queues_cfg[0].pkt_route = 0x0;
37
38	/* Default to phy auto-detection */
39	plat->phy_addr = -1;
40
41	plat->dma_cfg->pbl = 32;
42	plat->dma_cfg->pblx8 = true;
43
44	plat->multicast_filter_bins = 256;
45	return 0;
46}
47
48static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
49{
50	struct plat_stmmacenet_data *plat;
51	struct stmmac_resources res;
52	struct device_node *np;
53	int ret, i, phy_mode;
54
55	np = dev_of_node(&pdev->dev);
56
57	if (!np) {
58		pr_info("dwmac_loongson_pci: No OF node\n");
59		return -ENODEV;
60	}
61
62	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
63	if (!plat)
64		return -ENOMEM;
65
66	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
67					   sizeof(*plat->mdio_bus_data),
68					   GFP_KERNEL);
69	if (!plat->mdio_bus_data)
70		return -ENOMEM;
71
72	plat->mdio_node = of_get_child_by_name(np, "mdio");
73	if (plat->mdio_node) {
74		dev_info(&pdev->dev, "Found MDIO subnode\n");
75		plat->mdio_bus_data->needs_reset = true;
76	}
77
78	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
79	if (!plat->dma_cfg) {
80		ret = -ENOMEM;
81		goto err_put_node;
82	}
83
84	/* Enable pci device */
85	ret = pci_enable_device(pdev);
86	if (ret) {
87		dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__);
88		goto err_put_node;
89	}
90
91	/* Get the base address of device */
92	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
93		if (pci_resource_len(pdev, i) == 0)
94			continue;
95		ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
96		if (ret)
97			goto err_disable_device;
98		break;
99	}
100
101	plat->bus_id = of_alias_get_id(np, "ethernet");
102	if (plat->bus_id < 0)
103		plat->bus_id = pci_dev_id(pdev);
104
105	phy_mode = device_get_phy_mode(&pdev->dev);
106	if (phy_mode < 0) {
107		dev_err(&pdev->dev, "phy_mode not found\n");
108		ret = phy_mode;
109		goto err_disable_device;
110	}
111
112	plat->phy_interface = phy_mode;
113	plat->mac_interface = PHY_INTERFACE_MODE_GMII;
114
115	pci_set_master(pdev);
116
117	loongson_default_data(plat);
118	pci_enable_msi(pdev);
119	memset(&res, 0, sizeof(res));
120	res.addr = pcim_iomap_table(pdev)[0];
121
122	res.irq = of_irq_get_byname(np, "macirq");
123	if (res.irq < 0) {
124		dev_err(&pdev->dev, "IRQ macirq not found\n");
125		ret = -ENODEV;
126		goto err_disable_msi;
127	}
128
129	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
130	if (res.wol_irq < 0) {
131		dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
132		res.wol_irq = res.irq;
133	}
134
135	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
136	if (res.lpi_irq < 0) {
137		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
138		ret = -ENODEV;
139		goto err_disable_msi;
140	}
141
142	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
143	if (ret)
144		goto err_disable_msi;
145
146	return ret;
147
148err_disable_msi:
149	pci_disable_msi(pdev);
150err_disable_device:
151	pci_disable_device(pdev);
152err_put_node:
153	of_node_put(plat->mdio_node);
154	return ret;
155}
156
157static void loongson_dwmac_remove(struct pci_dev *pdev)
158{
159	struct net_device *ndev = dev_get_drvdata(&pdev->dev);
160	struct stmmac_priv *priv = netdev_priv(ndev);
161	int i;
162
163	of_node_put(priv->plat->mdio_node);
164	stmmac_dvr_remove(&pdev->dev);
165
166	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
167		if (pci_resource_len(pdev, i) == 0)
168			continue;
169		pcim_iounmap_regions(pdev, BIT(i));
170		break;
171	}
172
173	pci_disable_msi(pdev);
174	pci_disable_device(pdev);
175}
176
177static int __maybe_unused loongson_dwmac_suspend(struct device *dev)
178{
179	struct pci_dev *pdev = to_pci_dev(dev);
180	int ret;
181
182	ret = stmmac_suspend(dev);
183	if (ret)
184		return ret;
185
186	ret = pci_save_state(pdev);
187	if (ret)
188		return ret;
189
190	pci_disable_device(pdev);
191	pci_wake_from_d3(pdev, true);
192	return 0;
193}
194
195static int __maybe_unused loongson_dwmac_resume(struct device *dev)
196{
197	struct pci_dev *pdev = to_pci_dev(dev);
198	int ret;
199
200	pci_restore_state(pdev);
201	pci_set_power_state(pdev, PCI_D0);
202
203	ret = pci_enable_device(pdev);
204	if (ret)
205		return ret;
206
207	pci_set_master(pdev);
208
209	return stmmac_resume(dev);
210}
211
212static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
213			 loongson_dwmac_resume);
214
215static const struct pci_device_id loongson_dwmac_id_table[] = {
216	{ PCI_VDEVICE(LOONGSON, 0x7a03) },
217	{}
218};
219MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
220
221static struct pci_driver loongson_dwmac_driver = {
222	.name = "dwmac-loongson-pci",
223	.id_table = loongson_dwmac_id_table,
224	.probe = loongson_dwmac_probe,
225	.remove = loongson_dwmac_remove,
226	.driver = {
227		.pm = &loongson_dwmac_pm_ops,
228	},
229};
230
231module_pci_driver(loongson_dwmac_driver);
232
233MODULE_DESCRIPTION("Loongson DWMAC PCI driver");
234MODULE_AUTHOR("Qing Zhang <zhangqing@loongson.cn>");
235MODULE_LICENSE("GPL v2");
236