1/* version dependencies have been confined to a separate file */ 2 3/* Tunable parameters */ 4#define TX_RING_ENTRIES 64 /* 64-512?*/ 5 6#define RX_RING_ENTRIES 16 /* Do not change */ 7/* Internal constants */ 8#define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet)) 9#define RX_BUFFER_SIZE 1546 /* ethenet packet size */ 10#define METH_RX_BUFF_SIZE 4096 11#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */ 12#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */ 13#define RX_BUCKET_SIZE 256 14 15/* For more detailed explanations of what each field menas, 16 see Nick's great comments to #defines below (or docs, if 17 you are lucky enough toget hold of them :)*/ 18 19/* tx status vector is written over tx command header upon 20 dma completion. */ 21 22typedef struct tx_status_vector { 23 u64 sent:1; /* always set to 1...*/ 24 u64 pad0:34;/* always set to 0 */ 25 u64 flags:9; /*I'm too lazy to specify each one separately at the moment*/ 26 u64 col_retry_cnt:4; /*collision retry count*/ 27 u64 len:16; /*Transmit length in bytes*/ 28} tx_status_vector; 29 30/* 31 * Each packet is 128 bytes long. 32 * It consists of header, 0-3 concatination 33 * buffer pointers and up to 120 data bytes. 34 */ 35typedef struct tx_packet_hdr { 36 u64 pad1:36; /*should be filled with 0 */ 37 u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/ 38 cat_ptr2_valid:1, 39 cat_ptr1_valid:1; 40 u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/ 41 u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/ 42 u64 data_offset:7; /*Starting byte offset in ring data block*/ 43 u64 data_len:16; /*Length of valid data in bytes-1*/ 44} tx_packet_hdr; 45typedef union tx_cat_ptr { 46 struct { 47 u64 pad2:16; /* should be 0 */ 48 u64 len:16; /*length of buffer data - 1*/ 49 u64 start_addr:29; /*Physical starting address*/ 50 u64 pad1:3; /* should be zero */ 51 } form; 52 u64 raw; 53} tx_cat_ptr; 54 55typedef struct tx_packet { 56 union { 57 tx_packet_hdr header; 58 tx_status_vector res; 59 u64 raw; 60 }header; 61 union { 62 tx_cat_ptr cat_buf[3]; 63 char dt[120]; 64 } data; 65} tx_packet; 66 67typedef union rx_status_vector { 68 volatile struct { 69 u64 pad1:1;/*fill it with ones*/ 70 u64 pad2:15;/*fill with 0*/ 71 u64 ip_chk_sum:16; 72 u64 seq_num:5; 73 u64 mac_addr_match:1; 74 u64 mcast_addr_match:1; 75 u64 carrier_event_seen:1; 76 u64 bad_packet:1; 77 u64 long_event_seen:1; 78 u64 invalid_preamble:1; 79 u64 broadcast:1; 80 u64 multicast:1; 81 u64 crc_error:1; 82 u64 huh:1;/*???*/ 83 u64 rx_code_violation:1; 84 u64 rx_len:16; 85 } parsed; 86 volatile u64 raw; 87} rx_status_vector; 88 89typedef struct rx_packet { 90 rx_status_vector status; 91 u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */ 92 u16 pad2; 93 char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3*sizeof(u64)-sizeof(u16)];/* data */ 94} rx_packet; 95 96#define TX_INFO_RPTR 0x00FF0000 97#define TX_INFO_WPTR 0x000000FF 98 99 /* Bits in METH_MAC */ 100 101#define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */ 102#define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */ 103#define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */ 104 /* selects ignored */ 105#define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */ 106#define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */ 107 /* Note: when loopback is set this bit becomes collision control. Setting this bit will */ 108 /* cause a collision to be reported. */ 109 110 /* Bits 5 and 6 are used to determine the Destination address filter mode */ 111#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */ 112#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */ 113#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */ 114#define METH_PROMISC 0x60 /* 11: Promiscious mode */ 115 116#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */ 117 118#define METH_MAC_IPG 0x1ffff00 119 120#define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8)) 121 /* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/ 122 /* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */ 123 /* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */ 124 /* per increment for 10BaseT */ 125 126 /* Bits 15 through 21 are used to determine IPGR1 */ 127 128 /* Bits 22 through 28 are used to determine IPGR2 */ 129 130#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */ 131 /* 000: Initial revision */ 132 /* 001: First revision, Improved TX concatenation */ 133 134 135/* DMA control bits */ 136#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */ 137#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */ 138 139#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */ 140#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */ 141#define METH_DMA_RX_EN BIT(15) /* Enable RX */ 142#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */ 143 144/* RX FIFO MCL Info bits */ 145#define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf) 146#define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf) 147#define METH_RX_FIFO_DEPTH(x) ((x)&0x1f) 148 149/* RX status bits */ 150 151#define METH_RX_ST_VALID BIT(63) 152#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16) 153#define METH_RX_ST_DRBL_NBL BIT(17) 154#define METH_RX_ST_CRC_ERR BIT(18) 155#define METH_RX_ST_MCAST_PKT BIT(19) 156#define METH_RX_ST_BCAST_PKT BIT(20) 157#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21) 158#define METH_RX_ST_LONG_EVT_SEEN BIT(22) 159#define METH_RX_ST_BAD_PACKET BIT(23) 160#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24) 161#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25) 162#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26) 163 164#define METH_RX_STATUS_ERRORS \ 165 ( \ 166 METH_RX_ST_RCV_CODE_VIOLATION| \ 167 METH_RX_ST_CRC_ERR| \ 168 METH_RX_ST_INV_PREAMBLE_CTX| \ 169 METH_RX_ST_LONG_EVT_SEEN| \ 170 METH_RX_ST_BAD_PACKET| \ 171 METH_RX_ST_CARRIER_EVT_SEEN \ 172 ) 173 /* Bits in METH_INT */ 174 /* Write _1_ to corresponding bit to clear */ 175#define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */ 176#define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */ 177 /* 1: A TX message had the INT request bit set, the packet has been sent. */ 178#define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */ 179#define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */ 180 /* 1: A memory error occurred during DMA, DMA stopped, Fatal */ 181#define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */ 182#define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */ 183#define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */ 184#define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */ 185 186/*#define METH_INT_RX_RPTR_MASK 0x0001F00*/ /* Bits 8 through 12 alias of RX read-pointer */ 187#define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/ 188 189 /* Bits 13 through 15 are always 0. */ 190 191#define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */ 192 193#define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */ 194 195 /* top of the queue */ 196 197#define METH_INT_ERROR (METH_INT_TX_LINK_FAIL| \ 198 METH_INT_MEM_ERROR| \ 199 METH_INT_TX_ABORT| \ 200 METH_INT_RX_OVERFLOW| \ 201 METH_INT_RX_UNDERFLOW) 202 203#define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */ 204 205/* TX status bits */ 206#define METH_TX_ST_DONE BIT(63) /* TX complete */ 207#define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */ 208#define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */ 209#define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */ 210#define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */ 211#define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */ 212#define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */ 213 214 215/* Tx command header bits */ 216#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */ 217 218/* Phy MDIO interface busy flag */ 219#define MDIO_BUSY BIT(16) 220#define MDIO_DATA_MASK 0xFFFF 221/* PHY defines */ 222#define PHY_QS6612X 0x0181441 /* Quality TX */ 223#define PHY_ICS1889 0x0015F41 /* ICS FX */ 224#define PHY_ICS1890 0x0015F42 /* ICS TX */ 225#define PHY_DP83840 0x20005C0 /* National TX */ 226 227#define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1) 228