1/* SPDX-License-Identifier: GPL-2.0 */
2
3#ifndef _SLIC_H
4#define _SLIC_H
5
6#include <linux/types.h>
7#include <linux/netdevice.h>
8#include <linux/spinlock_types.h>
9#include <linux/dma-mapping.h>
10#include <linux/pci.h>
11#include <linux/list.h>
12#include <linux/u64_stats_sync.h>
13
14#define SLIC_VGBSTAT_XPERR		0x40000000
15#define SLIC_VGBSTAT_XERRSHFT		25
16#define SLIC_VGBSTAT_XCSERR		0x23
17#define SLIC_VGBSTAT_XUFLOW		0x22
18#define SLIC_VGBSTAT_XHLEN		0x20
19#define SLIC_VGBSTAT_NETERR		0x01000000
20#define SLIC_VGBSTAT_NERRSHFT		16
21#define SLIC_VGBSTAT_NERRMSK		0x1ff
22#define SLIC_VGBSTAT_NCSERR		0x103
23#define SLIC_VGBSTAT_NUFLOW		0x102
24#define SLIC_VGBSTAT_NHLEN		0x100
25#define SLIC_VGBSTAT_LNKERR		0x00000080
26#define SLIC_VGBSTAT_LERRMSK		0xff
27#define SLIC_VGBSTAT_LDEARLY		0x86
28#define SLIC_VGBSTAT_LBOFLO		0x85
29#define SLIC_VGBSTAT_LCODERR		0x84
30#define SLIC_VGBSTAT_LDBLNBL		0x83
31#define SLIC_VGBSTAT_LCRCERR		0x82
32#define SLIC_VGBSTAT_LOFLO		0x81
33#define SLIC_VGBSTAT_LUFLO		0x80
34
35#define SLIC_IRHDDR_FLEN_MSK		0x0000ffff
36#define SLIC_IRHDDR_SVALID		0x80000000
37#define SLIC_IRHDDR_ERR			0x10000000
38
39#define SLIC_VRHSTAT_802OE		0x80000000
40#define SLIC_VRHSTAT_TPOFLO		0x10000000
41#define SLIC_VRHSTATB_802UE		0x80000000
42#define SLIC_VRHSTATB_RCVE		0x40000000
43#define SLIC_VRHSTATB_BUFF		0x20000000
44#define SLIC_VRHSTATB_CARRE		0x08000000
45#define SLIC_VRHSTATB_LONGE		0x02000000
46#define SLIC_VRHSTATB_PREA		0x01000000
47#define SLIC_VRHSTATB_CRC		0x00800000
48#define SLIC_VRHSTATB_DRBL		0x00400000
49#define SLIC_VRHSTATB_CODE		0x00200000
50#define SLIC_VRHSTATB_TPCSUM		0x00100000
51#define SLIC_VRHSTATB_TPHLEN		0x00080000
52#define SLIC_VRHSTATB_IPCSUM		0x00040000
53#define SLIC_VRHSTATB_IPLERR		0x00020000
54#define SLIC_VRHSTATB_IPHERR		0x00010000
55
56#define SLIC_CMD_XMT_REQ		0x01
57#define SLIC_CMD_TYPE_DUMB		3
58
59#define SLIC_RESET_MAGIC		0xDEAD
60#define SLIC_ICR_INT_OFF		0
61#define SLIC_ICR_INT_ON			1
62#define SLIC_ICR_INT_MASK		2
63
64#define SLIC_ISR_ERR			0x80000000
65#define SLIC_ISR_RCV			0x40000000
66#define SLIC_ISR_CMD			0x20000000
67#define SLIC_ISR_IO			0x60000000
68#define SLIC_ISR_UPC			0x10000000
69#define SLIC_ISR_LEVENT			0x08000000
70#define SLIC_ISR_RMISS			0x02000000
71#define SLIC_ISR_UPCERR			0x01000000
72#define SLIC_ISR_XDROP			0x00800000
73#define SLIC_ISR_UPCBSY			0x00020000
74
75#define SLIC_ISR_PING_MASK		0x00700000
76#define SLIC_ISR_UPCERR_MASK		(SLIC_ISR_UPCERR | SLIC_ISR_UPCBSY)
77#define SLIC_ISR_UPC_MASK		(SLIC_ISR_UPC | SLIC_ISR_UPCERR_MASK)
78#define SLIC_WCS_START			0x80000000
79#define SLIC_WCS_COMPARE		0x40000000
80#define SLIC_RCVWCS_BEGIN		0x40000000
81#define SLIC_RCVWCS_FINISH		0x80000000
82
83#define SLIC_MIICR_REG_16		0x00100000
84#define SLIC_MRV_REG16_XOVERON		0x0068
85
86#define SLIC_GIG_LINKUP			0x0001
87#define SLIC_GIG_FULLDUPLEX		0x0002
88#define SLIC_GIG_SPEED_MASK		0x000C
89#define SLIC_GIG_SPEED_1000		0x0008
90#define SLIC_GIG_SPEED_100		0x0004
91#define SLIC_GIG_SPEED_10		0x0000
92
93#define SLIC_GMCR_RESET			0x80000000
94#define SLIC_GMCR_GBIT			0x20000000
95#define SLIC_GMCR_FULLD			0x10000000
96#define SLIC_GMCR_GAPBB_SHIFT		14
97#define SLIC_GMCR_GAPR1_SHIFT		7
98#define SLIC_GMCR_GAPR2_SHIFT		0
99#define SLIC_GMCR_GAPBB_1000		0x60
100#define SLIC_GMCR_GAPR1_1000		0x2C
101#define SLIC_GMCR_GAPR2_1000		0x40
102#define SLIC_GMCR_GAPBB_100		0x70
103#define SLIC_GMCR_GAPR1_100		0x2C
104#define SLIC_GMCR_GAPR2_100		0x40
105
106#define SLIC_XCR_RESET			0x80000000
107#define SLIC_XCR_XMTEN			0x40000000
108#define SLIC_XCR_PAUSEEN		0x20000000
109#define SLIC_XCR_LOADRNG		0x10000000
110
111#define SLIC_GXCR_RESET			0x80000000
112#define SLIC_GXCR_XMTEN			0x40000000
113#define SLIC_GXCR_PAUSEEN		0x20000000
114
115#define SLIC_GRCR_RESET			0x80000000
116#define SLIC_GRCR_RCVEN			0x40000000
117#define SLIC_GRCR_RCVALL		0x20000000
118#define SLIC_GRCR_RCVBAD		0x10000000
119#define SLIC_GRCR_CTLEN			0x08000000
120#define SLIC_GRCR_ADDRAEN		0x02000000
121#define SLIC_GRCR_HASHSIZE_SHIFT	17
122#define SLIC_GRCR_HASHSIZE		14
123
124/* Reset Register */
125#define SLIC_REG_RESET			0x0000
126/* Interrupt Control Register */
127#define SLIC_REG_ICR			0x0008
128/* Interrupt status pointer */
129#define SLIC_REG_ISP			0x0010
130/* Interrupt status */
131#define SLIC_REG_ISR			0x0018
132/* Header buffer address reg
133 * 31-8 - phy addr of set of contiguous hdr buffers
134 *  7-0 - number of buffers passed
135 * Buffers are 256 bytes long on 256-byte boundaries.
136 */
137#define SLIC_REG_HBAR			0x0020
138/* Data buffer handle & address reg
139 * 4 sets of registers; Buffers are 2K bytes long 2 per 4K page.
140 */
141#define SLIC_REG_DBAR			0x0028
142/* Xmt Cmd buf addr regs.
143 * 1 per XMT interface
144 * 31-5 - phy addr of host command buffer
145 *  4-0 - length of cmd in multiples of 32 bytes
146 * Buffers are 32 bytes up to 512 bytes long
147 */
148#define SLIC_REG_CBAR			0x0030
149/* Write control store */
150#define	SLIC_REG_WCS			0x0034
151/*Response buffer address reg.
152 * 31-8 - phy addr of set of contiguous response buffers
153 * 7-0 - number of buffers passed
154 * Buffers are 32 bytes long on 32-byte boundaries.
155 */
156#define	SLIC_REG_RBAR			0x0038
157/* Read statistics (UPR) */
158#define	SLIC_REG_RSTAT			0x0040
159/* Read link status */
160#define	SLIC_REG_LSTAT			0x0048
161/* Write Mac Config */
162#define	SLIC_REG_WMCFG			0x0050
163/* Write phy register */
164#define SLIC_REG_WPHY			0x0058
165/* Rcv Cmd buf addr reg */
166#define	SLIC_REG_RCBAR			0x0060
167/* Read SLIC Config*/
168#define SLIC_REG_RCONFIG		0x0068
169/* Interrupt aggregation time */
170#define SLIC_REG_INTAGG			0x0070
171/* Write XMIT config reg */
172#define	SLIC_REG_WXCFG			0x0078
173/* Write RCV config reg */
174#define	SLIC_REG_WRCFG			0x0080
175/* Write rcv addr a low */
176#define	SLIC_REG_WRADDRAL		0x0088
177/* Write rcv addr a high */
178#define	SLIC_REG_WRADDRAH		0x0090
179/* Write rcv addr b low */
180#define	SLIC_REG_WRADDRBL		0x0098
181/* Write rcv addr b high */
182#define	SLIC_REG_WRADDRBH		0x00a0
183/* Low bits of mcast mask */
184#define	SLIC_REG_MCASTLOW		0x00a8
185/* High bits of mcast mask */
186#define	SLIC_REG_MCASTHIGH		0x00b0
187/* Ping the card */
188#define SLIC_REG_PING			0x00b8
189/* Dump command */
190#define SLIC_REG_DUMP_CMD		0x00c0
191/* Dump data pointer */
192#define SLIC_REG_DUMP_DATA		0x00c8
193/* Read card's pci_status register */
194#define	SLIC_REG_PCISTATUS		0x00d0
195/* Write hostid field */
196#define SLIC_REG_WRHOSTID		0x00d8
197/* Put card in a low power state */
198#define SLIC_REG_LOW_POWER		0x00e0
199/* Force slic into quiescent state  before soft reset */
200#define SLIC_REG_QUIESCE		0x00e8
201/* Reset interface queues */
202#define SLIC_REG_RESET_IFACE		0x00f0
203/* Register is only written when it has changed.
204 * Bits 63-32 for host i/f addrs.
205 */
206#define SLIC_REG_ADDR_UPPER		0x00f8
207/* 64 bit Header buffer address reg */
208#define SLIC_REG_HBAR64			0x0100
209/* 64 bit Data buffer handle & address reg */
210#define SLIC_REG_DBAR64			0x0108
211/* 64 bit Xmt Cmd buf addr regs. */
212#define SLIC_REG_CBAR64			0x0110
213/* 64 bit Response buffer address reg.*/
214#define SLIC_REG_RBAR64			0x0118
215/* 64 bit Rcv Cmd buf addr reg*/
216#define	SLIC_REG_RCBAR64		0x0120
217/* Read statistics (64 bit UPR) */
218#define	SLIC_REG_RSTAT64		0x0128
219/* Download Gigabit RCV sequencer ucode */
220#define SLIC_REG_RCV_WCS		0x0130
221/* Write VlanId field */
222#define SLIC_REG_WRVLANID		0x0138
223/* Read Transformer info */
224#define SLIC_REG_READ_XF_INFO		0x0140
225/* Write Transformer info */
226#define SLIC_REG_WRITE_XF_INFO		0x0148
227/* Write card ticks per second */
228#define SLIC_REG_TICKS_PER_SEC		0x0170
229#define SLIC_REG_HOSTID			0x1554
230
231#define PCI_VENDOR_ID_ALACRITECH		0x139A
232#define PCI_DEVICE_ID_ALACRITECH_MOJAVE		0x0005
233#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1	0x0005
234#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1_2	0x0006
235#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1F	0x0007
236#define PCI_SUBDEVICE_ID_ALACRITECH_CICADA	0x0008
237#define PCI_SUBDEVICE_ID_ALACRITECH_SES1001T	0x2006
238#define PCI_SUBDEVICE_ID_ALACRITECH_SES1001F	0x2007
239#define PCI_DEVICE_ID_ALACRITECH_OASIS		0x0007
240#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XT	0x000B
241#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XF	0x000C
242#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XT	0x000D
243#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XF	0x000E
244#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104EF	0x000F
245#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104ET	0x0010
246#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102EF	0x0011
247#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102ET	0x0012
248
249/* Note: power of two required for number descriptors  */
250#define SLIC_NUM_RX_LES			256
251#define SLIC_RX_BUFF_SIZE		2048
252#define SLIC_RX_BUFF_ALIGN		256
253#define SLIC_RX_BUFF_HDR_SIZE		34
254#define SLIC_MAX_REQ_RX_DESCS		1
255
256#define SLIC_NUM_TX_DESCS		256
257#define SLIC_TX_DESC_ALIGN		32
258#define SLIC_MIN_TX_WAKEUP_DESCS	10
259#define SLIC_MAX_REQ_TX_DESCS		1
260#define SLIC_MAX_TX_COMPLETIONS		100
261
262#define SLIC_NUM_STAT_DESCS		128
263#define SLIC_STATS_DESC_ALIGN		256
264
265#define SLIC_NUM_STAT_DESC_ARRAYS	4
266#define SLIC_INVALID_STAT_DESC_IDX	0xffffffff
267
268#define SLIC_UPR_LSTAT			0
269#define SLIC_UPR_CONFIG			1
270
271#define SLIC_EEPROM_SIZE		128
272#define SLIC_EEPROM_MAGIC		0xa5a5
273
274#define SLIC_FIRMWARE_MOJAVE		"slicoss/gbdownload.sys"
275#define SLIC_FIRMWARE_OASIS		"slicoss/oasisdownload.sys"
276#define SLIC_RCV_FIRMWARE_MOJAVE	"slicoss/gbrcvucode.sys"
277#define SLIC_RCV_FIRMWARE_OASIS		"slicoss/oasisrcvucode.sys"
278#define SLIC_FIRMWARE_MIN_SIZE		64
279#define SLIC_FIRMWARE_MAX_SECTIONS	3
280
281#define SLIC_MODEL_MOJAVE		0
282#define SLIC_MODEL_OASIS		1
283
284#define SLIC_INC_STATS_COUNTER(st, counter)	\
285do {						\
286	u64_stats_update_begin(&(st)->syncp);	\
287	(st)->counter++;			\
288	u64_stats_update_end(&(st)->syncp);	\
289} while (0)
290
291#define SLIC_GET_STATS_COUNTER(newst, st, counter)		\
292{								\
293	unsigned int start;					\
294	do {							\
295		start = u64_stats_fetch_begin(&(st)->syncp);	\
296		newst = (st)->counter;				\
297	} while (u64_stats_fetch_retry(&(st)->syncp, start));	\
298}
299
300struct slic_upr {
301	dma_addr_t paddr;
302	unsigned int type;
303	struct list_head list;
304};
305
306struct slic_upr_list {
307	bool pending;
308	struct list_head list;
309	/* upr list lock */
310	spinlock_t lock;
311};
312
313/* SLIC EEPROM structure for Mojave */
314struct slic_mojave_eeprom {
315	__le16 id;		/* 00 EEPROM/FLASH Magic code 'A5A5'*/
316	__le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
317	__le16 flash_size;	/* 02 Flash size */
318	__le16 eeprom_size;	/* 03 EEPROM Size */
319	__le16 vendor_id;	/* 04 Vendor ID */
320	__le16 dev_id;		/* 05 Device ID */
321	u8 rev_id;		/* 06 Revision ID */
322	u8 class_code[3];	/* 07 Class Code */
323	u8 irqpin_dbg;		/* 08 Debug Interrupt pin */
324	u8 irqpin;		/*    Network Interrupt Pin */
325	u8 min_grant;		/* 09 Minimum grant */
326	u8 max_lat;		/*    Maximum Latency */
327	__le16 pci_stat;	/* 10 PCI Status */
328	__le16 sub_vendor_id;	/* 11 Subsystem Vendor Id */
329	__le16 sub_id;		/* 12 Subsystem ID */
330	__le16 dev_id_dbg;	/* 13 Debug Device Id */
331	__le16 ramrom;		/* 14 Dram/Rom function */
332	__le16 dram_size2pci;	/* 15 DRAM size to PCI (bytes * 64K) */
333	__le16 rom_size2pci;	/* 16 ROM extension size to PCI (bytes * 4k) */
334	u8 pad[2];		/* 17 Padding */
335	u8 freetime;		/* 18 FreeTime setting */
336	u8 ifctrl;		/* 10-bit interface control (Mojave only) */
337	__le16 dram_size;	/* 19 DRAM size (bytes * 64k) */
338	u8 mac[ETH_ALEN];	/* 20 MAC addresses */
339	u8 mac2[ETH_ALEN];
340	u8 pad2[6];
341	u16 dev_id2;		/* Device ID for 2nd PCI function */
342	u8 irqpin2;		/* Interrupt pin for 2nd PCI function */
343	u8 class_code2[3];	/* Class Code for 2nd PCI function */
344	u16 cfg_byte6;		/* Config Byte 6 */
345	u16 pme_cap;		/* Power Mgment capabilities */
346	u16 nwclk_ctrl;		/* NetworkClockControls */
347	u8 fru_format;		/* Alacritech FRU format type */
348	u8 fru_assembly[6];	/* Alacritech FRU information */
349	u8 fru_rev[2];
350	u8 fru_serial[14];
351	u8 fru_pad[3];
352	u8 oem_fru[28];		/* optional OEM FRU format type */
353	u8 pad3[4];		/* Pad to 128 bytes - includes 2 cksum bytes
354				 * (if OEM FRU info exists) and two unusable
355				 * bytes at the end
356				 */
357};
358
359/* SLIC EEPROM structure for Oasis */
360struct slic_oasis_eeprom {
361	__le16 id;		/* 00 EEPROM/FLASH Magic code 'A5A5' */
362	__le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
363	__le16 spidev0_cfg;	/* 02 Flash Config for SPI device 0 */
364	__le16 spidev1_cfg;	/* 03 Flash Config for SPI device 1 */
365	__le16 vendor_id;	/* 04 Vendor ID */
366	__le16 dev_id;		/* 05 Device ID (function 0) */
367	u8 rev_id;		/* 06 Revision ID */
368	u8 class_code0[3];	/* 07 Class Code for PCI function 0 */
369	u8 irqpin1;		/* 08 Interrupt pin for PCI function 1*/
370	u8 class_code1[3];	/* 09 Class Code for PCI function 1 */
371	u8 irqpin2;		/* 10 Interrupt pin for PCI function 2*/
372	u8 irqpin0;		/*    Interrupt pin for PCI function 0*/
373	u8 min_grant;		/* 11 Minimum grant */
374	u8 max_lat;		/*    Maximum Latency */
375	__le16 sub_vendor_id;	/* 12 Subsystem Vendor Id */
376	__le16 sub_id;		/* 13 Subsystem ID */
377	__le16 flash_size;	/* 14 Flash size (bytes / 4K) */
378	__le16 dram_size2pci;	/* 15 DRAM size to PCI (bytes / 64K) */
379	__le16 rom_size2pci;	/* 16 Flash (ROM extension) size to PCI
380				 *   (bytes / 4K)
381				 */
382	__le16 dev_id1;		/* 17 Device Id (function 1) */
383	__le16 dev_id2;		/* 18 Device Id (function 2) */
384	__le16 dev_stat_cfg;	/* 19 Device Status Config Bytes 6-7 */
385	__le16 pme_cap;		/* 20 Power Mgment capabilities */
386	u8 msi_cap;		/* 21 MSI capabilities */
387	u8 clock_div;		/*    Clock divider */
388	__le16 pci_stat_lo;	/* 22 PCI Status bits 15:0 */
389	__le16 pci_stat_hi;	/* 23 PCI Status bits 31:16 */
390	__le16 dram_cfg_lo;	/* 24 DRAM Configuration bits 15:0 */
391	__le16 dram_cfg_hi;	/* 25 DRAM Configuration bits 31:16 */
392	__le16 dram_size;	/* 26 DRAM size (bytes / 64K) */
393	__le16 gpio_tbi_ctrl;	/* 27 GPIO/TBI controls for functions 1/0 */
394	__le16 eeprom_size;	/* 28 EEPROM Size */
395	u8 mac[ETH_ALEN];	/* 29 MAC addresses (2 ports) */
396	u8 mac2[ETH_ALEN];
397	u8 fru_format;		/* 35 Alacritech FRU format type */
398	u8 fru_assembly[6];	/* Alacritech FRU information */
399	u8 fru_rev[2];
400	u8 fru_serial[14];
401	u8 fru_pad[3];
402	u8 oem_fru[28];		/* optional OEM FRU information */
403	u8 pad[4];		/* Pad to 128 bytes - includes 2 checksum bytes
404				 * (if OEM FRU info exists) and two unusable
405				 * bytes at the end
406				 */
407};
408
409struct slic_stats {
410	u64 rx_packets;
411	u64 rx_bytes;
412	u64 rx_mcasts;
413	u64 rx_errors;
414	u64 tx_packets;
415	u64 tx_bytes;
416	/* HW STATS */
417	u64 rx_buff_miss;
418	u64 tx_dropped;
419	u64 irq_errs;
420	/* transport layer */
421	u64 rx_tpcsum;
422	u64 rx_tpoflow;
423	u64 rx_tphlen;
424	/* ip layer */
425	u64 rx_ipcsum;
426	u64 rx_iplen;
427	u64 rx_iphlen;
428	/* link layer */
429	u64 rx_early;
430	u64 rx_buffoflow;
431	u64 rx_lcode;
432	u64 rx_drbl;
433	u64 rx_crc;
434	u64 rx_oflow802;
435	u64 rx_uflow802;
436	/* oasis only */
437	u64 tx_carrier;
438	struct u64_stats_sync syncp;
439};
440
441struct slic_shmem_data {
442	__le32 isr;
443	__le32 link;
444};
445
446struct slic_shmem {
447	dma_addr_t isr_paddr;
448	dma_addr_t link_paddr;
449	struct slic_shmem_data *shmem_data;
450};
451
452struct slic_rx_info_oasis {
453	__le32 frame_status;
454	__le32 frame_status_b;
455	__le32 time_stamp;
456	__le32 checksum;
457};
458
459struct slic_rx_info_mojave {
460	__le32 frame_status;
461	__le16 byte_cnt;
462	__le16 tp_chksum;
463	__le16 ctx_hash;
464	__le16 mac_hash;
465	__le16 buff_lnk;
466};
467
468struct slic_stat_desc {
469	__le32 hnd;
470	__u8 pad[8];
471	__le32 status;
472	__u8 pad2[16];
473};
474
475struct slic_stat_queue {
476	struct slic_stat_desc *descs[SLIC_NUM_STAT_DESC_ARRAYS];
477	dma_addr_t paddr[SLIC_NUM_STAT_DESC_ARRAYS];
478	unsigned int addr_offset[SLIC_NUM_STAT_DESC_ARRAYS];
479	unsigned int active_array;
480	unsigned int len;
481	unsigned int done_idx;
482	size_t mem_size;
483};
484
485struct slic_tx_desc {
486	__le32 hnd;
487	__le32 rsvd;
488	u8 cmd;
489	u8 flags;
490	__le16 rsvd2;
491	__le32 totlen;
492	__le32 paddrl;
493	__le32 paddrh;
494	__le32 len;
495	__le32 type;
496};
497
498struct slic_tx_buffer {
499	struct sk_buff *skb;
500	DEFINE_DMA_UNMAP_ADDR(map_addr);
501	DEFINE_DMA_UNMAP_LEN(map_len);
502	struct slic_tx_desc *desc;
503	dma_addr_t desc_paddr;
504};
505
506struct slic_tx_queue {
507	struct dma_pool *dma_pool;
508	struct slic_tx_buffer *txbuffs;
509	unsigned int len;
510	unsigned int put_idx;
511	unsigned int done_idx;
512};
513
514struct slic_rx_desc {
515	u8 pad[16];
516	__le32 buffer;
517	__le32 length;
518	__le32 status;
519};
520
521struct slic_rx_buffer {
522	struct sk_buff *skb;
523	DEFINE_DMA_UNMAP_ADDR(map_addr);
524	DEFINE_DMA_UNMAP_LEN(map_len);
525	unsigned int addr_offset;
526};
527
528struct slic_rx_queue {
529	struct slic_rx_buffer *rxbuffs;
530	unsigned int len;
531	unsigned int done_idx;
532	unsigned int put_idx;
533};
534
535struct slic_device {
536	struct pci_dev *pdev;
537	struct net_device *netdev;
538	void __iomem *regs;
539	/* upper address setting lock */
540	spinlock_t upper_lock;
541	struct slic_shmem shmem;
542	struct napi_struct napi;
543	struct slic_rx_queue rxq;
544	struct slic_tx_queue txq;
545	struct slic_stat_queue stq;
546	struct slic_stats stats;
547	struct slic_upr_list upr_list;
548	/* link configuration lock */
549	spinlock_t link_lock;
550	bool promisc;
551	int speed;
552	unsigned int duplex;
553	bool is_fiber;
554	unsigned char model;
555};
556
557static inline u32 slic_read(struct slic_device *sdev, unsigned int reg)
558{
559	return ioread32(sdev->regs + reg);
560}
561
562static inline void slic_write(struct slic_device *sdev, unsigned int reg,
563			      u32 val)
564{
565	iowrite32(val, sdev->regs + reg);
566}
567
568static inline void slic_flush_write(struct slic_device *sdev)
569{
570	(void)ioread32(sdev->regs + SLIC_REG_HOSTID);
571}
572
573#endif /* _SLIC_H */
574