1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright �� 2019 Intel Corporation 4 * 5 * mei_hdcp.c: HDCP client driver for mei bus 6 * 7 * Author: 8 * Ramalingam C <ramalingam.c@intel.com> 9 */ 10 11/** 12 * DOC: MEI_HDCP Client Driver 13 * 14 * The mei_hdcp driver acts as a translation layer between HDCP 2.2 15 * protocol implementer (I915) and ME FW by translating HDCP2.2 16 * negotiation messages to ME FW command payloads and vice versa. 17 */ 18 19#include <linux/module.h> 20#include <linux/pci.h> 21#include <linux/slab.h> 22#include <linux/mei.h> 23#include <linux/mei_cl_bus.h> 24#include <linux/component.h> 25#include <drm/drm_connector.h> 26#include <drm/i915_component.h> 27#include <drm/i915_hdcp_interface.h> 28 29#include "mei_hdcp.h" 30 31/** 32 * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW 33 * @dev: device corresponding to the mei_cl_device 34 * @data: Intel HW specific hdcp data 35 * @ake_data: AKE_Init msg output. 36 * 37 * Return: 0 on Success, <0 on Failure. 38 */ 39static int 40mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data, 41 struct hdcp2_ake_init *ake_data) 42{ 43 struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } }; 44 struct wired_cmd_initiate_hdcp2_session_out 45 session_init_out = { { 0 } }; 46 struct mei_cl_device *cldev; 47 ssize_t byte; 48 49 if (!dev || !data || !ake_data) 50 return -EINVAL; 51 52 cldev = to_mei_cl_device(dev); 53 54 session_init_in.header.api_version = HDCP_API_VERSION; 55 session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION; 56 session_init_in.header.status = FW_HDCP_STATUS_SUCCESS; 57 session_init_in.header.buffer_len = 58 WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN; 59 60 session_init_in.port.integrated_port_type = data->port_type; 61 session_init_in.port.physical_port = (u8)data->hdcp_ddi; 62 session_init_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 63 session_init_in.protocol = data->protocol; 64 65 byte = mei_cldev_send(cldev, (u8 *)&session_init_in, 66 sizeof(session_init_in)); 67 if (byte < 0) { 68 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 69 return byte; 70 } 71 72 byte = mei_cldev_recv(cldev, (u8 *)&session_init_out, 73 sizeof(session_init_out)); 74 if (byte < 0) { 75 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 76 return byte; 77 } 78 79 if (session_init_out.header.status != FW_HDCP_STATUS_SUCCESS) { 80 dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", 81 WIRED_INITIATE_HDCP2_SESSION, 82 session_init_out.header.status); 83 return -EIO; 84 } 85 86 ake_data->msg_id = HDCP_2_2_AKE_INIT; 87 ake_data->tx_caps = session_init_out.tx_caps; 88 memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN); 89 90 return 0; 91} 92 93/** 94 * mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate 95 * AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km 96 * @dev: device corresponding to the mei_cl_device 97 * @data: Intel HW specific hdcp data 98 * @rx_cert: AKE_Send_Cert for verification 99 * @km_stored: Pairing status flag output 100 * @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg 101 * @msg_sz : size of AKE_XXXXX_Km output msg 102 * 103 * Return: 0 on Success, <0 on Failure 104 */ 105static int 106mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev, 107 struct hdcp_port_data *data, 108 struct hdcp2_ake_send_cert *rx_cert, 109 bool *km_stored, 110 struct hdcp2_ake_no_stored_km 111 *ek_pub_km, 112 size_t *msg_sz) 113{ 114 struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } }; 115 struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } }; 116 struct mei_cl_device *cldev; 117 ssize_t byte; 118 119 if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz) 120 return -EINVAL; 121 122 cldev = to_mei_cl_device(dev); 123 124 verify_rxcert_in.header.api_version = HDCP_API_VERSION; 125 verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT; 126 verify_rxcert_in.header.status = FW_HDCP_STATUS_SUCCESS; 127 verify_rxcert_in.header.buffer_len = 128 WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN; 129 130 verify_rxcert_in.port.integrated_port_type = data->port_type; 131 verify_rxcert_in.port.physical_port = (u8)data->hdcp_ddi; 132 verify_rxcert_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 133 134 verify_rxcert_in.cert_rx = rx_cert->cert_rx; 135 memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN); 136 memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN); 137 138 byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in, 139 sizeof(verify_rxcert_in)); 140 if (byte < 0) { 141 dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte); 142 return byte; 143 } 144 145 byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out, 146 sizeof(verify_rxcert_out)); 147 if (byte < 0) { 148 dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte); 149 return byte; 150 } 151 152 if (verify_rxcert_out.header.status != FW_HDCP_STATUS_SUCCESS) { 153 dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", 154 WIRED_VERIFY_RECEIVER_CERT, 155 verify_rxcert_out.header.status); 156 return -EIO; 157 } 158 159 *km_stored = !!verify_rxcert_out.km_stored; 160 if (verify_rxcert_out.km_stored) { 161 ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM; 162 *msg_sz = sizeof(struct hdcp2_ake_stored_km); 163 } else { 164 ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM; 165 *msg_sz = sizeof(struct hdcp2_ake_no_stored_km); 166 } 167 168 memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff, 169 sizeof(verify_rxcert_out.ekm_buff)); 170 171 return 0; 172} 173 174/** 175 * mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW. 176 * @dev: device corresponding to the mei_cl_device 177 * @data: Intel HW specific hdcp data 178 * @rx_hprime: AKE_Send_H_prime msg for ME FW verification 179 * 180 * Return: 0 on Success, <0 on Failure 181 */ 182static int 183mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data, 184 struct hdcp2_ake_send_hprime *rx_hprime) 185{ 186 struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } }; 187 struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } }; 188 struct mei_cl_device *cldev; 189 ssize_t byte; 190 191 if (!dev || !data || !rx_hprime) 192 return -EINVAL; 193 194 cldev = to_mei_cl_device(dev); 195 196 send_hprime_in.header.api_version = HDCP_API_VERSION; 197 send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME; 198 send_hprime_in.header.status = FW_HDCP_STATUS_SUCCESS; 199 send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN; 200 201 send_hprime_in.port.integrated_port_type = data->port_type; 202 send_hprime_in.port.physical_port = (u8)data->hdcp_ddi; 203 send_hprime_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 204 205 memcpy(send_hprime_in.h_prime, rx_hprime->h_prime, 206 HDCP_2_2_H_PRIME_LEN); 207 208 byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in, 209 sizeof(send_hprime_in)); 210 if (byte < 0) { 211 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 212 return byte; 213 } 214 215 byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out, 216 sizeof(send_hprime_out)); 217 if (byte < 0) { 218 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 219 return byte; 220 } 221 222 if (send_hprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { 223 dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", 224 WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status); 225 return -EIO; 226 } 227 228 return 0; 229} 230 231/** 232 * mei_hdcp_store_pairing_info() - Store pairing info received at ME FW 233 * @dev: device corresponding to the mei_cl_device 234 * @data: Intel HW specific hdcp data 235 * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW 236 * 237 * Return: 0 on Success, <0 on Failure 238 */ 239static int 240mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data, 241 struct hdcp2_ake_send_pairing_info *pairing_info) 242{ 243 struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } }; 244 struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } }; 245 struct mei_cl_device *cldev; 246 ssize_t byte; 247 248 if (!dev || !data || !pairing_info) 249 return -EINVAL; 250 251 cldev = to_mei_cl_device(dev); 252 253 pairing_info_in.header.api_version = HDCP_API_VERSION; 254 pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO; 255 pairing_info_in.header.status = FW_HDCP_STATUS_SUCCESS; 256 pairing_info_in.header.buffer_len = 257 WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN; 258 259 pairing_info_in.port.integrated_port_type = data->port_type; 260 pairing_info_in.port.physical_port = (u8)data->hdcp_ddi; 261 pairing_info_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 262 263 memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km, 264 HDCP_2_2_E_KH_KM_LEN); 265 266 byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in, 267 sizeof(pairing_info_in)); 268 if (byte < 0) { 269 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 270 return byte; 271 } 272 273 byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out, 274 sizeof(pairing_info_out)); 275 if (byte < 0) { 276 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 277 return byte; 278 } 279 280 if (pairing_info_out.header.status != FW_HDCP_STATUS_SUCCESS) { 281 dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n", 282 WIRED_AKE_SEND_PAIRING_INFO, 283 pairing_info_out.header.status); 284 return -EIO; 285 } 286 287 return 0; 288} 289 290/** 291 * mei_hdcp_initiate_locality_check() - Prepare LC_Init 292 * @dev: device corresponding to the mei_cl_device 293 * @data: Intel HW specific hdcp data 294 * @lc_init_data: LC_Init msg output 295 * 296 * Return: 0 on Success, <0 on Failure 297 */ 298static int 299mei_hdcp_initiate_locality_check(struct device *dev, 300 struct hdcp_port_data *data, 301 struct hdcp2_lc_init *lc_init_data) 302{ 303 struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } }; 304 struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } }; 305 struct mei_cl_device *cldev; 306 ssize_t byte; 307 308 if (!dev || !data || !lc_init_data) 309 return -EINVAL; 310 311 cldev = to_mei_cl_device(dev); 312 313 lc_init_in.header.api_version = HDCP_API_VERSION; 314 lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK; 315 lc_init_in.header.status = FW_HDCP_STATUS_SUCCESS; 316 lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN; 317 318 lc_init_in.port.integrated_port_type = data->port_type; 319 lc_init_in.port.physical_port = (u8)data->hdcp_ddi; 320 lc_init_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 321 322 byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in)); 323 if (byte < 0) { 324 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 325 return byte; 326 } 327 328 byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out)); 329 if (byte < 0) { 330 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 331 return byte; 332 } 333 334 if (lc_init_out.header.status != FW_HDCP_STATUS_SUCCESS) { 335 dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n", 336 WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status); 337 return -EIO; 338 } 339 340 lc_init_data->msg_id = HDCP_2_2_LC_INIT; 341 memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN); 342 343 return 0; 344} 345 346/** 347 * mei_hdcp_verify_lprime() - Verify lprime. 348 * @dev: device corresponding to the mei_cl_device 349 * @data: Intel HW specific hdcp data 350 * @rx_lprime: LC_Send_L_prime msg for ME FW verification 351 * 352 * Return: 0 on Success, <0 on Failure 353 */ 354static int 355mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data, 356 struct hdcp2_lc_send_lprime *rx_lprime) 357{ 358 struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } }; 359 struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } }; 360 struct mei_cl_device *cldev; 361 ssize_t byte; 362 363 if (!dev || !data || !rx_lprime) 364 return -EINVAL; 365 366 cldev = to_mei_cl_device(dev); 367 368 verify_lprime_in.header.api_version = HDCP_API_VERSION; 369 verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY; 370 verify_lprime_in.header.status = FW_HDCP_STATUS_SUCCESS; 371 verify_lprime_in.header.buffer_len = 372 WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN; 373 374 verify_lprime_in.port.integrated_port_type = data->port_type; 375 verify_lprime_in.port.physical_port = (u8)data->hdcp_ddi; 376 verify_lprime_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 377 378 memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime, 379 HDCP_2_2_L_PRIME_LEN); 380 381 byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in, 382 sizeof(verify_lprime_in)); 383 if (byte < 0) { 384 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 385 return byte; 386 } 387 388 byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out, 389 sizeof(verify_lprime_out)); 390 if (byte < 0) { 391 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 392 return byte; 393 } 394 395 if (verify_lprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { 396 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 397 WIRED_VALIDATE_LOCALITY, 398 verify_lprime_out.header.status); 399 return -EIO; 400 } 401 402 return 0; 403} 404 405/** 406 * mei_hdcp_get_session_key() - Prepare SKE_Send_Eks. 407 * @dev: device corresponding to the mei_cl_device 408 * @data: Intel HW specific hdcp data 409 * @ske_data: SKE_Send_Eks msg output from ME FW. 410 * 411 * Return: 0 on Success, <0 on Failure 412 */ 413static int mei_hdcp_get_session_key(struct device *dev, 414 struct hdcp_port_data *data, 415 struct hdcp2_ske_send_eks *ske_data) 416{ 417 struct wired_cmd_get_session_key_in get_skey_in = { { 0 } }; 418 struct wired_cmd_get_session_key_out get_skey_out = { { 0 } }; 419 struct mei_cl_device *cldev; 420 ssize_t byte; 421 422 if (!dev || !data || !ske_data) 423 return -EINVAL; 424 425 cldev = to_mei_cl_device(dev); 426 427 get_skey_in.header.api_version = HDCP_API_VERSION; 428 get_skey_in.header.command_id = WIRED_GET_SESSION_KEY; 429 get_skey_in.header.status = FW_HDCP_STATUS_SUCCESS; 430 get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN; 431 432 get_skey_in.port.integrated_port_type = data->port_type; 433 get_skey_in.port.physical_port = (u8)data->hdcp_ddi; 434 get_skey_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 435 436 byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in)); 437 if (byte < 0) { 438 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 439 return byte; 440 } 441 442 byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out)); 443 444 if (byte < 0) { 445 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 446 return byte; 447 } 448 449 if (get_skey_out.header.status != FW_HDCP_STATUS_SUCCESS) { 450 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 451 WIRED_GET_SESSION_KEY, get_skey_out.header.status); 452 return -EIO; 453 } 454 455 ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS; 456 memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks, 457 HDCP_2_2_E_DKEY_KS_LEN); 458 memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN); 459 460 return 0; 461} 462 463/** 464 * mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology 465 * and prepare rep_ack. 466 * @dev: device corresponding to the mei_cl_device 467 * @data: Intel HW specific hdcp data 468 * @rep_topology: Receiver ID List to be validated 469 * @rep_send_ack : repeater ack from ME FW. 470 * 471 * Return: 0 on Success, <0 on Failure 472 */ 473static int 474mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev, 475 struct hdcp_port_data *data, 476 struct hdcp2_rep_send_receiverid_list 477 *rep_topology, 478 struct hdcp2_rep_send_ack 479 *rep_send_ack) 480{ 481 struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } }; 482 struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } }; 483 struct mei_cl_device *cldev; 484 ssize_t byte; 485 486 if (!dev || !rep_topology || !rep_send_ack || !data) 487 return -EINVAL; 488 489 cldev = to_mei_cl_device(dev); 490 491 verify_repeater_in.header.api_version = HDCP_API_VERSION; 492 verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER; 493 verify_repeater_in.header.status = FW_HDCP_STATUS_SUCCESS; 494 verify_repeater_in.header.buffer_len = 495 WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN; 496 497 verify_repeater_in.port.integrated_port_type = data->port_type; 498 verify_repeater_in.port.physical_port = (u8)data->hdcp_ddi; 499 verify_repeater_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 500 501 memcpy(verify_repeater_in.rx_info, rep_topology->rx_info, 502 HDCP_2_2_RXINFO_LEN); 503 memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v, 504 HDCP_2_2_SEQ_NUM_LEN); 505 memcpy(verify_repeater_in.v_prime, rep_topology->v_prime, 506 HDCP_2_2_V_PRIME_HALF_LEN); 507 memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids, 508 HDCP_2_2_RECEIVER_IDS_MAX_LEN); 509 510 byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in, 511 sizeof(verify_repeater_in)); 512 if (byte < 0) { 513 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 514 return byte; 515 } 516 517 byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out, 518 sizeof(verify_repeater_out)); 519 if (byte < 0) { 520 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 521 return byte; 522 } 523 524 if (verify_repeater_out.header.status != FW_HDCP_STATUS_SUCCESS) { 525 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 526 WIRED_VERIFY_REPEATER, 527 verify_repeater_out.header.status); 528 return -EIO; 529 } 530 531 memcpy(rep_send_ack->v, verify_repeater_out.v, 532 HDCP_2_2_V_PRIME_HALF_LEN); 533 rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK; 534 535 return 0; 536} 537 538/** 539 * mei_hdcp_verify_mprime() - Verify mprime. 540 * @dev: device corresponding to the mei_cl_device 541 * @data: Intel HW specific hdcp data 542 * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification. 543 * 544 * Return: 0 on Success, <0 on Failure 545 */ 546static int mei_hdcp_verify_mprime(struct device *dev, 547 struct hdcp_port_data *data, 548 struct hdcp2_rep_stream_ready *stream_ready) 549{ 550 struct wired_cmd_repeater_auth_stream_req_in *verify_mprime_in; 551 struct wired_cmd_repeater_auth_stream_req_out 552 verify_mprime_out = { { 0 } }; 553 struct mei_cl_device *cldev; 554 ssize_t byte; 555 size_t cmd_size; 556 557 if (!dev || !stream_ready || !data) 558 return -EINVAL; 559 560 cldev = to_mei_cl_device(dev); 561 562 cmd_size = struct_size(verify_mprime_in, streams, data->k); 563 if (cmd_size == SIZE_MAX) 564 return -EINVAL; 565 566 verify_mprime_in = kzalloc(cmd_size, GFP_KERNEL); 567 if (!verify_mprime_in) 568 return -ENOMEM; 569 570 verify_mprime_in->header.api_version = HDCP_API_VERSION; 571 verify_mprime_in->header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ; 572 verify_mprime_in->header.status = FW_HDCP_STATUS_SUCCESS; 573 verify_mprime_in->header.buffer_len = cmd_size - sizeof(verify_mprime_in->header); 574 575 verify_mprime_in->port.integrated_port_type = data->port_type; 576 verify_mprime_in->port.physical_port = (u8)data->hdcp_ddi; 577 verify_mprime_in->port.attached_transcoder = (u8)data->hdcp_transcoder; 578 579 memcpy(verify_mprime_in->m_prime, stream_ready->m_prime, HDCP_2_2_MPRIME_LEN); 580 drm_hdcp_cpu_to_be24(verify_mprime_in->seq_num_m, data->seq_num_m); 581 582 memcpy(verify_mprime_in->streams, data->streams, 583 array_size(data->k, sizeof(*data->streams))); 584 585 verify_mprime_in->k = cpu_to_be16(data->k); 586 587 byte = mei_cldev_send(cldev, (u8 *)verify_mprime_in, cmd_size); 588 kfree(verify_mprime_in); 589 if (byte < 0) { 590 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 591 return byte; 592 } 593 594 byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out, 595 sizeof(verify_mprime_out)); 596 if (byte < 0) { 597 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 598 return byte; 599 } 600 601 if (verify_mprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { 602 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 603 WIRED_REPEATER_AUTH_STREAM_REQ, 604 verify_mprime_out.header.status); 605 return -EIO; 606 } 607 608 return 0; 609} 610 611/** 612 * mei_hdcp_enable_authentication() - Mark a port as authenticated 613 * through ME FW 614 * @dev: device corresponding to the mei_cl_device 615 * @data: Intel HW specific hdcp data 616 * 617 * Return: 0 on Success, <0 on Failure 618 */ 619static int mei_hdcp_enable_authentication(struct device *dev, 620 struct hdcp_port_data *data) 621{ 622 struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } }; 623 struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } }; 624 struct mei_cl_device *cldev; 625 ssize_t byte; 626 627 if (!dev || !data) 628 return -EINVAL; 629 630 cldev = to_mei_cl_device(dev); 631 632 enable_auth_in.header.api_version = HDCP_API_VERSION; 633 enable_auth_in.header.command_id = WIRED_ENABLE_AUTH; 634 enable_auth_in.header.status = FW_HDCP_STATUS_SUCCESS; 635 enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN; 636 637 enable_auth_in.port.integrated_port_type = data->port_type; 638 enable_auth_in.port.physical_port = (u8)data->hdcp_ddi; 639 enable_auth_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 640 enable_auth_in.stream_type = data->streams[0].stream_type; 641 642 byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in, 643 sizeof(enable_auth_in)); 644 if (byte < 0) { 645 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 646 return byte; 647 } 648 649 byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out, 650 sizeof(enable_auth_out)); 651 if (byte < 0) { 652 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 653 return byte; 654 } 655 656 if (enable_auth_out.header.status != FW_HDCP_STATUS_SUCCESS) { 657 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 658 WIRED_ENABLE_AUTH, enable_auth_out.header.status); 659 return -EIO; 660 } 661 662 return 0; 663} 664 665/** 666 * mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port. 667 * This also disables the authenticated state of the port. 668 * @dev: device corresponding to the mei_cl_device 669 * @data: Intel HW specific hdcp data 670 * 671 * Return: 0 on Success, <0 on Failure 672 */ 673static int 674mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data) 675{ 676 struct wired_cmd_close_session_in session_close_in = { { 0 } }; 677 struct wired_cmd_close_session_out session_close_out = { { 0 } }; 678 struct mei_cl_device *cldev; 679 ssize_t byte; 680 681 if (!dev || !data) 682 return -EINVAL; 683 684 cldev = to_mei_cl_device(dev); 685 686 session_close_in.header.api_version = HDCP_API_VERSION; 687 session_close_in.header.command_id = WIRED_CLOSE_SESSION; 688 session_close_in.header.status = FW_HDCP_STATUS_SUCCESS; 689 session_close_in.header.buffer_len = 690 WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN; 691 692 session_close_in.port.integrated_port_type = data->port_type; 693 session_close_in.port.physical_port = (u8)data->hdcp_ddi; 694 session_close_in.port.attached_transcoder = (u8)data->hdcp_transcoder; 695 696 byte = mei_cldev_send(cldev, (u8 *)&session_close_in, 697 sizeof(session_close_in)); 698 if (byte < 0) { 699 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 700 return byte; 701 } 702 703 byte = mei_cldev_recv(cldev, (u8 *)&session_close_out, 704 sizeof(session_close_out)); 705 if (byte < 0) { 706 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 707 return byte; 708 } 709 710 if (session_close_out.header.status != FW_HDCP_STATUS_SUCCESS) { 711 dev_dbg(dev, "Session Close Failed. status: 0x%X\n", 712 session_close_out.header.status); 713 return -EIO; 714 } 715 716 return 0; 717} 718 719static const struct i915_hdcp_ops mei_hdcp_ops = { 720 .owner = THIS_MODULE, 721 .initiate_hdcp2_session = mei_hdcp_initiate_session, 722 .verify_receiver_cert_prepare_km = 723 mei_hdcp_verify_receiver_cert_prepare_km, 724 .verify_hprime = mei_hdcp_verify_hprime, 725 .store_pairing_info = mei_hdcp_store_pairing_info, 726 .initiate_locality_check = mei_hdcp_initiate_locality_check, 727 .verify_lprime = mei_hdcp_verify_lprime, 728 .get_session_key = mei_hdcp_get_session_key, 729 .repeater_check_flow_prepare_ack = 730 mei_hdcp_repeater_check_flow_prepare_ack, 731 .verify_mprime = mei_hdcp_verify_mprime, 732 .enable_hdcp_authentication = mei_hdcp_enable_authentication, 733 .close_hdcp_session = mei_hdcp_close_session, 734}; 735 736static int mei_component_master_bind(struct device *dev) 737{ 738 struct mei_cl_device *cldev = to_mei_cl_device(dev); 739 struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); 740 int ret; 741 742 dev_dbg(dev, "%s\n", __func__); 743 comp_arbiter->ops = &mei_hdcp_ops; 744 comp_arbiter->hdcp_dev = dev; 745 ret = component_bind_all(dev, comp_arbiter); 746 if (ret < 0) 747 return ret; 748 749 return 0; 750} 751 752static void mei_component_master_unbind(struct device *dev) 753{ 754 struct mei_cl_device *cldev = to_mei_cl_device(dev); 755 struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); 756 757 dev_dbg(dev, "%s\n", __func__); 758 component_unbind_all(dev, comp_arbiter); 759} 760 761static const struct component_master_ops mei_component_master_ops = { 762 .bind = mei_component_master_bind, 763 .unbind = mei_component_master_unbind, 764}; 765 766/** 767 * mei_hdcp_component_match - compare function for matching mei hdcp. 768 * 769 * The function checks if the driver is i915, the subcomponent is HDCP 770 * and the grand parent of hdcp and the parent of i915 are the same 771 * PCH device. 772 * 773 * @dev: master device 774 * @subcomponent: subcomponent to match (I915_COMPONENT_HDCP) 775 * @data: compare data (mei hdcp device) 776 * 777 * Return: 778 * * 1 - if components match 779 * * 0 - otherwise 780 */ 781static int mei_hdcp_component_match(struct device *dev, int subcomponent, 782 void *data) 783{ 784 struct device *base = data; 785 struct pci_dev *pdev; 786 787 if (!dev_is_pci(dev)) 788 return 0; 789 790 pdev = to_pci_dev(dev); 791 792 if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) || 793 pdev->vendor != PCI_VENDOR_ID_INTEL) 794 return 0; 795 796 if (subcomponent != I915_COMPONENT_HDCP) 797 return 0; 798 799 base = base->parent; 800 if (!base) 801 return 0; 802 803 base = base->parent; 804 dev = dev->parent; 805 806 return (base && dev && dev == base); 807} 808 809static int mei_hdcp_probe(struct mei_cl_device *cldev, 810 const struct mei_cl_device_id *id) 811{ 812 struct i915_hdcp_arbiter *comp_arbiter; 813 struct component_match *master_match; 814 int ret; 815 816 ret = mei_cldev_enable(cldev); 817 if (ret < 0) { 818 dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret); 819 goto enable_err_exit; 820 } 821 822 comp_arbiter = kzalloc(sizeof(*comp_arbiter), GFP_KERNEL); 823 if (!comp_arbiter) { 824 ret = -ENOMEM; 825 goto err_exit; 826 } 827 828 master_match = NULL; 829 component_match_add_typed(&cldev->dev, &master_match, 830 mei_hdcp_component_match, &cldev->dev); 831 if (IS_ERR_OR_NULL(master_match)) { 832 ret = -ENOMEM; 833 goto err_exit; 834 } 835 836 mei_cldev_set_drvdata(cldev, comp_arbiter); 837 ret = component_master_add_with_match(&cldev->dev, 838 &mei_component_master_ops, 839 master_match); 840 if (ret < 0) { 841 dev_err(&cldev->dev, "Master comp add failed %d\n", ret); 842 goto err_exit; 843 } 844 845 return 0; 846 847err_exit: 848 mei_cldev_set_drvdata(cldev, NULL); 849 kfree(comp_arbiter); 850 mei_cldev_disable(cldev); 851enable_err_exit: 852 return ret; 853} 854 855static void mei_hdcp_remove(struct mei_cl_device *cldev) 856{ 857 struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); 858 int ret; 859 860 component_master_del(&cldev->dev, &mei_component_master_ops); 861 kfree(comp_arbiter); 862 mei_cldev_set_drvdata(cldev, NULL); 863 864 ret = mei_cldev_disable(cldev); 865 if (ret) 866 dev_warn(&cldev->dev, "mei_cldev_disable() failed\n"); 867} 868 869#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \ 870 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04) 871 872static const struct mei_cl_device_id mei_hdcp_tbl[] = { 873 { .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY }, 874 { } 875}; 876MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl); 877 878static struct mei_cl_driver mei_hdcp_driver = { 879 .id_table = mei_hdcp_tbl, 880 .name = KBUILD_MODNAME, 881 .probe = mei_hdcp_probe, 882 .remove = mei_hdcp_remove, 883}; 884 885module_mei_cl_driver(mei_hdcp_driver); 886 887MODULE_AUTHOR("Intel Corporation"); 888MODULE_LICENSE("GPL"); 889MODULE_DESCRIPTION("MEI HDCP"); 890