1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 cx231xx-pcb-cfg.h - driver for Conexant 4 Cx23100/101/102 USB video capture devices 5 6 Copyright (C) 2008 <srinivasa.deevi at conexant dot com> 7 8 */ 9 10#ifndef _PCB_CONFIG_H_ 11#define _PCB_CONFIG_H_ 12 13#include <linux/init.h> 14#include <linux/module.h> 15 16/*************************************************************************** 17 * Class Information * 18***************************************************************************/ 19#define CLASS_DEFAULT 0xFF 20 21enum VENDOR_REQUEST_TYPE { 22 /* Set/Get I2C */ 23 VRT_SET_I2C0 = 0x0, 24 VRT_SET_I2C1 = 0x1, 25 VRT_SET_I2C2 = 0x2, 26 VRT_GET_I2C0 = 0x4, 27 VRT_GET_I2C1 = 0x5, 28 VRT_GET_I2C2 = 0x6, 29 30 /* Set/Get GPIO */ 31 VRT_SET_GPIO = 0x8, 32 VRT_GET_GPIO = 0x9, 33 34 /* Set/Get GPIE */ 35 VRT_SET_GPIE = 0xA, 36 VRT_GET_GPIE = 0xB, 37 38 /* Set/Get Register Control/Status */ 39 VRT_SET_REGISTER = 0xC, 40 VRT_GET_REGISTER = 0xD, 41 42 /* Get Extended Compat ID Descriptor */ 43 VRT_GET_EXTCID_DESC = 0xFF, 44}; 45 46enum BYTE_ENABLE_MASK { 47 ENABLE_ONE_BYTE = 0x1, 48 ENABLE_TWE_BYTE = 0x3, 49 ENABLE_THREE_BYTE = 0x7, 50 ENABLE_FOUR_BYTE = 0xF, 51}; 52 53#define SPEED_MASK 0x1 54enum USB_SPEED{ 55 FULL_SPEED = 0x0, /* 0: full speed */ 56 HIGH_SPEED = 0x1 /* 1: high speed */ 57}; 58 59#define TS_MASK 0x6 60enum TS_PORT{ 61 NO_TS_PORT = 0x0, /* 2'b00: Neither port used. PCB not a Hybrid, 62 only offers Analog TV or Video */ 63 TS1_PORT = 0x4, /* 2'b10: TS1 Input (Hybrid mode : 64 Digital or External Analog/Compressed source) */ 65 TS1_TS2_PORT = 0x6, /* 2'b11: TS1 & TS2 Inputs 66 (Dual inputs from Digital and/or 67 External Analog/Compressed sources) */ 68 TS1_EXT_CLOCK = 0x6, /* 2'b11: TS1 & TS2 as selector 69 to external clock */ 70 TS1VIP_TS2_PORT = 0x2 /* 2'b01: TS1 used as 656/VIP Output, 71 TS2 Input (from Compressor) */ 72}; 73 74#define EAVP_MASK 0x8 75enum EAV_PRESENT{ 76 NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs 77 (no need for i2s block), 78 Analog Tuner must be present */ 79 EXTERNAL_AV = 0x8 /* 1: External A/V inputs 80 present (requires i2s blk) */ 81}; 82 83#define ATM_MASK 0x30 84enum AT_MODE{ 85 DIF_TUNER = 0x30, /* 2'b11: IF Tuner (requires use of DIF) */ 86 BASEBAND_SOUND = 0x20, /* 2'b10: Baseband Composite & 87 Sound-IF Signals present */ 88 NO_TUNER = 0x10 /* 2'b0x: No Analog Tuner present */ 89}; 90 91#define PWR_SEL_MASK 0x40 92enum POWE_TYPE{ 93 SELF_POWER = 0x0, /* 0: self power */ 94 BUS_POWER = 0x40 /* 1: bus power */ 95}; 96 97enum USB_POWE_TYPE{ 98 USB_SELF_POWER = 0, 99 USB_BUS_POWER 100}; 101 102#define BO_0_MASK 0x80 103enum AVDEC_STATUS{ 104 AVDEC_DISABLE = 0x0, /* 0: A/V Decoder Disabled */ 105 AVDEC_ENABLE = 0x80 /* 1: A/V Decoder Enabled */ 106}; 107 108#define BO_1_MASK 0x100 109 110#define BUSPOWER_MASK 0xC4 /* for Polaris spec 0.8 */ 111#define SELFPOWER_MASK 0x86 112 113/***************************************************************************/ 114#define NOT_DECIDE_YET 0xFE 115#define NOT_SUPPORTED 0xFF 116 117/*************************************************************************** 118 * for mod field use * 119***************************************************************************/ 120#define MOD_DIGITAL 0x1 121#define MOD_ANALOG 0x2 122#define MOD_DIF 0x4 123#define MOD_EXTERNAL 0x8 124#define CAP_ALL_MOD 0x0f 125 126/*************************************************************************** 127 * source define * 128***************************************************************************/ 129#define SOURCE_DIGITAL 0x1 130#define SOURCE_ANALOG 0x2 131#define SOURCE_DIF 0x4 132#define SOURCE_EXTERNAL 0x8 133#define SOURCE_TS_BDA 0x10 134#define SOURCE_TS_ENCODE 0x20 135#define SOURCE_TS_EXTERNAL 0x40 136 137/*************************************************************************** 138 * interface information define * 139***************************************************************************/ 140struct INTERFACE_INFO { 141 u8 interrupt_index; 142 u8 ts1_index; 143 u8 ts2_index; 144 u8 audio_index; 145 u8 video_index; 146 u8 vanc_index; /* VBI */ 147 u8 hanc_index; /* Sliced CC */ 148 u8 ir_index; 149}; 150 151enum INDEX_INTERFACE_INFO{ 152 INDEX_INTERRUPT = 0x0, 153 INDEX_TS1, 154 INDEX_TS2, 155 INDEX_AUDIO, 156 INDEX_VIDEO, 157 INDEX_VANC, 158 INDEX_HANC, 159 INDEX_IR, 160}; 161 162/*************************************************************************** 163 * configuration information define * 164***************************************************************************/ 165struct CONFIG_INFO { 166 u8 config_index; 167 struct INTERFACE_INFO interface_info; 168}; 169 170struct pcb_config { 171 u8 index; 172 u8 type; /* bus power or self power, 173 self power--0, bus_power--1 */ 174 u8 speed; /* usb speed, 2.0--1, 1.1--0 */ 175 u8 mode; /* digital , anlog, dif or external A/V */ 176 u32 ts1_source; /* three source -- BDA,External,encode */ 177 u32 ts2_source; 178 u32 analog_source; 179 u8 digital_index; /* bus-power used */ 180 u8 analog_index; /* bus-power used */ 181 u8 dif_index; /* bus-power used */ 182 u8 external_index; /* bus-power used */ 183 u8 config_num; /* current config num, 0,1,2, 184 for self-power, always 0 */ 185 struct CONFIG_INFO hs_config_info[3]; 186 struct CONFIG_INFO fs_config_info[3]; 187}; 188 189enum INDEX_PCB_CONFIG{ 190 INDEX_SELFPOWER_DIGITAL_ONLY = 0x0, 191 INDEX_SELFPOWER_DUAL_DIGITAL, 192 INDEX_SELFPOWER_ANALOG_ONLY, 193 INDEX_SELFPOWER_DUAL, 194 INDEX_SELFPOWER_TRIPLE, 195 INDEX_SELFPOWER_COMPRESSOR, 196 INDEX_BUSPOWER_DIGITAL_ONLY, 197 INDEX_BUSPOWER_ANALOG_ONLY, 198 INDEX_BUSPOWER_DIF_ONLY, 199 INDEX_BUSPOWER_EXTERNAL_ONLY, 200 INDEX_BUSPOWER_EXTERNAL_ANALOG, 201 INDEX_BUSPOWER_EXTERNAL_DIF, 202 INDEX_BUSPOWER_EXTERNAL_DIGITAL, 203 INDEX_BUSPOWER_DIGITAL_ANALOG, 204 INDEX_BUSPOWER_DIGITAL_DIF, 205 INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL, 206 INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL, 207}; 208 209/***************************************************************************/ 210struct cx231xx; 211 212int initialize_cx231xx(struct cx231xx *p_dev); 213 214#endif 215