1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Samsung S5P Multi Format Codec v 5.1 4 * 5 * Copyright (c) 2011 Samsung Electronics Co., Ltd. 6 * Kamil Debski, <k.debski@samsung.com> 7 */ 8 9#include <linux/clk.h> 10#include <linux/delay.h> 11#include <linux/interrupt.h> 12#include <linux/io.h> 13#include <linux/module.h> 14#include <linux/platform_device.h> 15#include <linux/sched.h> 16#include <linux/slab.h> 17#include <linux/videodev2.h> 18#include <media/v4l2-event.h> 19#include <linux/workqueue.h> 20#include <linux/of.h> 21#include <linux/of_device.h> 22#include <linux/of_reserved_mem.h> 23#include <media/videobuf2-v4l2.h> 24#include "s5p_mfc_common.h" 25#include "s5p_mfc_ctrl.h" 26#include "s5p_mfc_debug.h" 27#include "s5p_mfc_dec.h" 28#include "s5p_mfc_enc.h" 29#include "s5p_mfc_intr.h" 30#include "s5p_mfc_iommu.h" 31#include "s5p_mfc_opr.h" 32#include "s5p_mfc_cmd.h" 33#include "s5p_mfc_pm.h" 34 35#define S5P_MFC_DEC_NAME "s5p-mfc-dec" 36#define S5P_MFC_ENC_NAME "s5p-mfc-enc" 37 38int mfc_debug_level; 39module_param_named(debug, mfc_debug_level, int, 0644); 40MODULE_PARM_DESC(debug, "Debug level - higher value produces more verbose messages"); 41 42static char *mfc_mem_size; 43module_param_named(mem, mfc_mem_size, charp, 0644); 44MODULE_PARM_DESC(mem, "Preallocated memory size for the firmware and context buffers"); 45 46/* Helper functions for interrupt processing */ 47 48/* Remove from hw execution round robin */ 49void clear_work_bit(struct s5p_mfc_ctx *ctx) 50{ 51 struct s5p_mfc_dev *dev = ctx->dev; 52 53 spin_lock(&dev->condlock); 54 __clear_bit(ctx->num, &dev->ctx_work_bits); 55 spin_unlock(&dev->condlock); 56} 57 58/* Add to hw execution round robin */ 59void set_work_bit(struct s5p_mfc_ctx *ctx) 60{ 61 struct s5p_mfc_dev *dev = ctx->dev; 62 63 spin_lock(&dev->condlock); 64 __set_bit(ctx->num, &dev->ctx_work_bits); 65 spin_unlock(&dev->condlock); 66} 67 68/* Remove from hw execution round robin */ 69void clear_work_bit_irqsave(struct s5p_mfc_ctx *ctx) 70{ 71 struct s5p_mfc_dev *dev = ctx->dev; 72 unsigned long flags; 73 74 spin_lock_irqsave(&dev->condlock, flags); 75 __clear_bit(ctx->num, &dev->ctx_work_bits); 76 spin_unlock_irqrestore(&dev->condlock, flags); 77} 78 79/* Add to hw execution round robin */ 80void set_work_bit_irqsave(struct s5p_mfc_ctx *ctx) 81{ 82 struct s5p_mfc_dev *dev = ctx->dev; 83 unsigned long flags; 84 85 spin_lock_irqsave(&dev->condlock, flags); 86 __set_bit(ctx->num, &dev->ctx_work_bits); 87 spin_unlock_irqrestore(&dev->condlock, flags); 88} 89 90int s5p_mfc_get_new_ctx(struct s5p_mfc_dev *dev) 91{ 92 unsigned long flags; 93 int ctx; 94 95 spin_lock_irqsave(&dev->condlock, flags); 96 ctx = dev->curr_ctx; 97 do { 98 ctx = (ctx + 1) % MFC_NUM_CONTEXTS; 99 if (ctx == dev->curr_ctx) { 100 if (!test_bit(ctx, &dev->ctx_work_bits)) 101 ctx = -EAGAIN; 102 break; 103 } 104 } while (!test_bit(ctx, &dev->ctx_work_bits)); 105 spin_unlock_irqrestore(&dev->condlock, flags); 106 107 return ctx; 108} 109 110/* Wake up context wait_queue */ 111static void wake_up_ctx(struct s5p_mfc_ctx *ctx, unsigned int reason, 112 unsigned int err) 113{ 114 ctx->int_cond = 1; 115 ctx->int_type = reason; 116 ctx->int_err = err; 117 wake_up(&ctx->queue); 118} 119 120/* Wake up device wait_queue */ 121static void wake_up_dev(struct s5p_mfc_dev *dev, unsigned int reason, 122 unsigned int err) 123{ 124 dev->int_cond = 1; 125 dev->int_type = reason; 126 dev->int_err = err; 127 wake_up(&dev->queue); 128} 129 130void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq) 131{ 132 struct s5p_mfc_buf *b; 133 int i; 134 135 while (!list_empty(lh)) { 136 b = list_entry(lh->next, struct s5p_mfc_buf, list); 137 for (i = 0; i < b->b->vb2_buf.num_planes; i++) 138 vb2_set_plane_payload(&b->b->vb2_buf, i, 0); 139 vb2_buffer_done(&b->b->vb2_buf, VB2_BUF_STATE_ERROR); 140 list_del(&b->list); 141 } 142} 143 144static void s5p_mfc_watchdog(struct timer_list *t) 145{ 146 struct s5p_mfc_dev *dev = from_timer(dev, t, watchdog_timer); 147 148 if (test_bit(0, &dev->hw_lock)) 149 atomic_inc(&dev->watchdog_cnt); 150 if (atomic_read(&dev->watchdog_cnt) >= MFC_WATCHDOG_CNT) { 151 /* 152 * This means that hw is busy and no interrupts were 153 * generated by hw for the Nth time of running this 154 * watchdog timer. This usually means a serious hw 155 * error. Now it is time to kill all instances and 156 * reset the MFC. 157 */ 158 mfc_err("Time out during waiting for HW\n"); 159 schedule_work(&dev->watchdog_work); 160 } 161 dev->watchdog_timer.expires = jiffies + 162 msecs_to_jiffies(MFC_WATCHDOG_INTERVAL); 163 add_timer(&dev->watchdog_timer); 164} 165 166static void s5p_mfc_watchdog_worker(struct work_struct *work) 167{ 168 struct s5p_mfc_dev *dev; 169 struct s5p_mfc_ctx *ctx; 170 unsigned long flags; 171 int mutex_locked; 172 int i, ret; 173 174 dev = container_of(work, struct s5p_mfc_dev, watchdog_work); 175 176 mfc_err("Driver timeout error handling\n"); 177 /* 178 * Lock the mutex that protects open and release. 179 * This is necessary as they may load and unload firmware. 180 */ 181 mutex_locked = mutex_trylock(&dev->mfc_mutex); 182 if (!mutex_locked) 183 mfc_err("Error: some instance may be closing/opening\n"); 184 spin_lock_irqsave(&dev->irqlock, flags); 185 186 s5p_mfc_clock_off(dev); 187 188 for (i = 0; i < MFC_NUM_CONTEXTS; i++) { 189 ctx = dev->ctx[i]; 190 if (!ctx) 191 continue; 192 ctx->state = MFCINST_ERROR; 193 s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst); 194 s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src); 195 clear_work_bit(ctx); 196 wake_up_ctx(ctx, S5P_MFC_R2H_CMD_ERR_RET, 0); 197 } 198 clear_bit(0, &dev->hw_lock); 199 spin_unlock_irqrestore(&dev->irqlock, flags); 200 201 /* De-init MFC */ 202 s5p_mfc_deinit_hw(dev); 203 204 /* 205 * Double check if there is at least one instance running. 206 * If no instance is in memory than no firmware should be present 207 */ 208 if (dev->num_inst > 0) { 209 ret = s5p_mfc_load_firmware(dev); 210 if (ret) { 211 mfc_err("Failed to reload FW\n"); 212 goto unlock; 213 } 214 s5p_mfc_clock_on(dev); 215 ret = s5p_mfc_init_hw(dev); 216 s5p_mfc_clock_off(dev); 217 if (ret) 218 mfc_err("Failed to reinit FW\n"); 219 } 220unlock: 221 if (mutex_locked) 222 mutex_unlock(&dev->mfc_mutex); 223} 224 225static void s5p_mfc_handle_frame_all_extracted(struct s5p_mfc_ctx *ctx) 226{ 227 struct s5p_mfc_buf *dst_buf; 228 struct s5p_mfc_dev *dev = ctx->dev; 229 230 ctx->state = MFCINST_FINISHED; 231 ctx->sequence++; 232 while (!list_empty(&ctx->dst_queue)) { 233 dst_buf = list_entry(ctx->dst_queue.next, 234 struct s5p_mfc_buf, list); 235 mfc_debug(2, "Cleaning up buffer: %d\n", 236 dst_buf->b->vb2_buf.index); 237 vb2_set_plane_payload(&dst_buf->b->vb2_buf, 0, 0); 238 vb2_set_plane_payload(&dst_buf->b->vb2_buf, 1, 0); 239 list_del(&dst_buf->list); 240 dst_buf->flags |= MFC_BUF_FLAG_EOS; 241 ctx->dst_queue_cnt--; 242 dst_buf->b->sequence = (ctx->sequence++); 243 244 if (s5p_mfc_hw_call(dev->mfc_ops, get_pic_type_top, ctx) == 245 s5p_mfc_hw_call(dev->mfc_ops, get_pic_type_bot, ctx)) 246 dst_buf->b->field = V4L2_FIELD_NONE; 247 else 248 dst_buf->b->field = V4L2_FIELD_INTERLACED; 249 dst_buf->b->flags |= V4L2_BUF_FLAG_LAST; 250 251 ctx->dec_dst_flag &= ~(1 << dst_buf->b->vb2_buf.index); 252 vb2_buffer_done(&dst_buf->b->vb2_buf, VB2_BUF_STATE_DONE); 253 } 254} 255 256static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx) 257{ 258 struct s5p_mfc_dev *dev = ctx->dev; 259 struct s5p_mfc_buf *dst_buf, *src_buf; 260 u32 dec_y_addr; 261 unsigned int frame_type; 262 263 /* Make sure we actually have a new frame before continuing. */ 264 frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev); 265 if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) 266 return; 267 dec_y_addr = (u32)s5p_mfc_hw_call(dev->mfc_ops, get_dec_y_adr, dev); 268 269 /* 270 * Copy timestamp / timecode from decoded src to dst and set 271 * appropriate flags. 272 */ 273 src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); 274 list_for_each_entry(dst_buf, &ctx->dst_queue, list) { 275 u32 addr = (u32)vb2_dma_contig_plane_dma_addr(&dst_buf->b->vb2_buf, 0); 276 277 if (addr == dec_y_addr) { 278 dst_buf->b->timecode = src_buf->b->timecode; 279 dst_buf->b->vb2_buf.timestamp = 280 src_buf->b->vb2_buf.timestamp; 281 dst_buf->b->flags &= 282 ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK; 283 dst_buf->b->flags |= 284 src_buf->b->flags 285 & V4L2_BUF_FLAG_TSTAMP_SRC_MASK; 286 switch (frame_type) { 287 case S5P_FIMV_DECODE_FRAME_I_FRAME: 288 dst_buf->b->flags |= 289 V4L2_BUF_FLAG_KEYFRAME; 290 break; 291 case S5P_FIMV_DECODE_FRAME_P_FRAME: 292 dst_buf->b->flags |= 293 V4L2_BUF_FLAG_PFRAME; 294 break; 295 case S5P_FIMV_DECODE_FRAME_B_FRAME: 296 dst_buf->b->flags |= 297 V4L2_BUF_FLAG_BFRAME; 298 break; 299 default: 300 /* 301 * Don't know how to handle 302 * S5P_FIMV_DECODE_FRAME_OTHER_FRAME. 303 */ 304 mfc_debug(2, "Unexpected frame type: %d\n", 305 frame_type); 306 } 307 break; 308 } 309 } 310} 311 312static void s5p_mfc_handle_frame_new(struct s5p_mfc_ctx *ctx, unsigned int err) 313{ 314 struct s5p_mfc_dev *dev = ctx->dev; 315 struct s5p_mfc_buf *dst_buf; 316 u32 dspl_y_addr; 317 unsigned int frame_type; 318 319 dspl_y_addr = (u32)s5p_mfc_hw_call(dev->mfc_ops, get_dspl_y_adr, dev); 320 if (IS_MFCV6_PLUS(dev)) 321 frame_type = s5p_mfc_hw_call(dev->mfc_ops, 322 get_disp_frame_type, ctx); 323 else 324 frame_type = s5p_mfc_hw_call(dev->mfc_ops, 325 get_dec_frame_type, dev); 326 327 /* If frame is same as previous then skip and do not dequeue */ 328 if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) { 329 if (!ctx->after_packed_pb) 330 ctx->sequence++; 331 ctx->after_packed_pb = 0; 332 return; 333 } 334 ctx->sequence++; 335 /* 336 * The MFC returns address of the buffer, now we have to 337 * check which vb2_buffer does it correspond to 338 */ 339 list_for_each_entry(dst_buf, &ctx->dst_queue, list) { 340 u32 addr = (u32)vb2_dma_contig_plane_dma_addr(&dst_buf->b->vb2_buf, 0); 341 342 /* Check if this is the buffer we're looking for */ 343 if (addr == dspl_y_addr) { 344 list_del(&dst_buf->list); 345 ctx->dst_queue_cnt--; 346 dst_buf->b->sequence = ctx->sequence; 347 if (s5p_mfc_hw_call(dev->mfc_ops, 348 get_pic_type_top, ctx) == 349 s5p_mfc_hw_call(dev->mfc_ops, 350 get_pic_type_bot, ctx)) 351 dst_buf->b->field = V4L2_FIELD_NONE; 352 else 353 dst_buf->b->field = 354 V4L2_FIELD_INTERLACED; 355 vb2_set_plane_payload(&dst_buf->b->vb2_buf, 0, 356 ctx->luma_size); 357 vb2_set_plane_payload(&dst_buf->b->vb2_buf, 1, 358 ctx->chroma_size); 359 clear_bit(dst_buf->b->vb2_buf.index, 360 &ctx->dec_dst_flag); 361 362 vb2_buffer_done(&dst_buf->b->vb2_buf, err ? 363 VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); 364 365 break; 366 } 367 } 368} 369 370/* Handle frame decoding interrupt */ 371static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx, 372 unsigned int reason, unsigned int err) 373{ 374 struct s5p_mfc_dev *dev = ctx->dev; 375 unsigned int dst_frame_status; 376 unsigned int dec_frame_status; 377 struct s5p_mfc_buf *src_buf; 378 unsigned int res_change; 379 380 dst_frame_status = s5p_mfc_hw_call(dev->mfc_ops, get_dspl_status, dev) 381 & S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK; 382 dec_frame_status = s5p_mfc_hw_call(dev->mfc_ops, get_dec_status, dev) 383 & S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK; 384 res_change = (s5p_mfc_hw_call(dev->mfc_ops, get_dspl_status, dev) 385 & S5P_FIMV_DEC_STATUS_RESOLUTION_MASK) 386 >> S5P_FIMV_DEC_STATUS_RESOLUTION_SHIFT; 387 mfc_debug(2, "Frame Status: %x\n", dst_frame_status); 388 if (ctx->state == MFCINST_RES_CHANGE_INIT) 389 ctx->state = MFCINST_RES_CHANGE_FLUSH; 390 if (res_change == S5P_FIMV_RES_INCREASE || 391 res_change == S5P_FIMV_RES_DECREASE) { 392 ctx->state = MFCINST_RES_CHANGE_INIT; 393 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 394 wake_up_ctx(ctx, reason, err); 395 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); 396 s5p_mfc_clock_off(dev); 397 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); 398 return; 399 } 400 if (ctx->dpb_flush_flag) 401 ctx->dpb_flush_flag = 0; 402 403 /* All frames remaining in the buffer have been extracted */ 404 if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_EMPTY) { 405 if (ctx->state == MFCINST_RES_CHANGE_FLUSH) { 406 static const struct v4l2_event ev_src_ch = { 407 .type = V4L2_EVENT_SOURCE_CHANGE, 408 .u.src_change.changes = 409 V4L2_EVENT_SRC_CH_RESOLUTION, 410 }; 411 412 s5p_mfc_handle_frame_all_extracted(ctx); 413 ctx->state = MFCINST_RES_CHANGE_END; 414 v4l2_event_queue_fh(&ctx->fh, &ev_src_ch); 415 416 goto leave_handle_frame; 417 } else { 418 s5p_mfc_handle_frame_all_extracted(ctx); 419 } 420 } 421 422 if (dec_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY) 423 s5p_mfc_handle_frame_copy_time(ctx); 424 425 /* A frame has been decoded and is in the buffer */ 426 if (dst_frame_status == S5P_FIMV_DEC_STATUS_DISPLAY_ONLY || 427 dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY) { 428 s5p_mfc_handle_frame_new(ctx, err); 429 } else { 430 mfc_debug(2, "No frame decode\n"); 431 } 432 /* Mark source buffer as complete */ 433 if (dst_frame_status != S5P_FIMV_DEC_STATUS_DISPLAY_ONLY 434 && !list_empty(&ctx->src_queue)) { 435 src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, 436 list); 437 ctx->consumed_stream += s5p_mfc_hw_call(dev->mfc_ops, 438 get_consumed_stream, dev); 439 if (ctx->codec_mode != S5P_MFC_CODEC_H264_DEC && 440 ctx->codec_mode != S5P_MFC_CODEC_VP8_DEC && 441 ctx->consumed_stream + STUFF_BYTE < 442 src_buf->b->vb2_buf.planes[0].bytesused) { 443 /* Run MFC again on the same buffer */ 444 mfc_debug(2, "Running again the same buffer\n"); 445 ctx->after_packed_pb = 1; 446 } else { 447 mfc_debug(2, "MFC needs next buffer\n"); 448 ctx->consumed_stream = 0; 449 if (src_buf->flags & MFC_BUF_FLAG_EOS) 450 ctx->state = MFCINST_FINISHING; 451 list_del(&src_buf->list); 452 ctx->src_queue_cnt--; 453 if (s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) > 0) 454 vb2_buffer_done(&src_buf->b->vb2_buf, 455 VB2_BUF_STATE_ERROR); 456 else 457 vb2_buffer_done(&src_buf->b->vb2_buf, 458 VB2_BUF_STATE_DONE); 459 } 460 } 461leave_handle_frame: 462 if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING) 463 || ctx->dst_queue_cnt < ctx->pb_count) 464 clear_work_bit(ctx); 465 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 466 wake_up_ctx(ctx, reason, err); 467 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); 468 s5p_mfc_clock_off(dev); 469 /* if suspending, wake up device and do not try_run again*/ 470 if (test_bit(0, &dev->enter_suspend)) 471 wake_up_dev(dev, reason, err); 472 else 473 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); 474} 475 476/* Error handling for interrupt */ 477static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev, 478 struct s5p_mfc_ctx *ctx, unsigned int reason, unsigned int err) 479{ 480 mfc_err("Interrupt Error: %08x\n", err); 481 482 if (ctx) { 483 /* Error recovery is dependent on the state of context */ 484 switch (ctx->state) { 485 case MFCINST_RES_CHANGE_INIT: 486 case MFCINST_RES_CHANGE_FLUSH: 487 case MFCINST_RES_CHANGE_END: 488 case MFCINST_FINISHING: 489 case MFCINST_FINISHED: 490 case MFCINST_RUNNING: 491 /* 492 * It is highly probable that an error occurred 493 * while decoding a frame 494 */ 495 clear_work_bit(ctx); 496 ctx->state = MFCINST_ERROR; 497 /* Mark all dst buffers as having an error */ 498 s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst); 499 /* Mark all src buffers as having an error */ 500 s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src); 501 wake_up_ctx(ctx, reason, err); 502 break; 503 default: 504 clear_work_bit(ctx); 505 ctx->state = MFCINST_ERROR; 506 wake_up_ctx(ctx, reason, err); 507 break; 508 } 509 } 510 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); 511 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 512 s5p_mfc_clock_off(dev); 513 wake_up_dev(dev, reason, err); 514} 515 516/* Header parsing interrupt handling */ 517static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx, 518 unsigned int reason, unsigned int err) 519{ 520 struct s5p_mfc_dev *dev; 521 522 if (!ctx) 523 return; 524 dev = ctx->dev; 525 if (ctx->c_ops->post_seq_start) { 526 if (ctx->c_ops->post_seq_start(ctx)) 527 mfc_err("post_seq_start() failed\n"); 528 } else { 529 ctx->img_width = s5p_mfc_hw_call(dev->mfc_ops, get_img_width, 530 dev); 531 ctx->img_height = s5p_mfc_hw_call(dev->mfc_ops, get_img_height, 532 dev); 533 534 s5p_mfc_hw_call(dev->mfc_ops, dec_calc_dpb_size, ctx); 535 536 ctx->pb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count, 537 dev); 538 ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count, 539 dev); 540 if (FW_HAS_E_MIN_SCRATCH_BUF(dev)) 541 ctx->scratch_buf_size = s5p_mfc_hw_call(dev->mfc_ops, 542 get_min_scratch_buf_size, dev); 543 if (ctx->img_width == 0 || ctx->img_height == 0) 544 ctx->state = MFCINST_ERROR; 545 else 546 ctx->state = MFCINST_HEAD_PARSED; 547 548 if ((ctx->codec_mode == S5P_MFC_CODEC_H264_DEC || 549 ctx->codec_mode == S5P_MFC_CODEC_H264_MVC_DEC) && 550 !list_empty(&ctx->src_queue)) { 551 struct s5p_mfc_buf *src_buf; 552 553 src_buf = list_entry(ctx->src_queue.next, 554 struct s5p_mfc_buf, list); 555 if (s5p_mfc_hw_call(dev->mfc_ops, get_consumed_stream, 556 dev) < 557 src_buf->b->vb2_buf.planes[0].bytesused) 558 ctx->head_processed = 0; 559 else 560 ctx->head_processed = 1; 561 } else { 562 ctx->head_processed = 1; 563 } 564 } 565 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 566 clear_work_bit(ctx); 567 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); 568 s5p_mfc_clock_off(dev); 569 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); 570 wake_up_ctx(ctx, reason, err); 571} 572 573/* Header parsing interrupt handling */ 574static void s5p_mfc_handle_init_buffers(struct s5p_mfc_ctx *ctx, 575 unsigned int reason, unsigned int err) 576{ 577 struct s5p_mfc_buf *src_buf; 578 struct s5p_mfc_dev *dev; 579 580 if (!ctx) 581 return; 582 dev = ctx->dev; 583 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 584 ctx->int_type = reason; 585 ctx->int_err = err; 586 ctx->int_cond = 1; 587 clear_work_bit(ctx); 588 if (err == 0) { 589 ctx->state = MFCINST_RUNNING; 590 if (!ctx->dpb_flush_flag && ctx->head_processed) { 591 if (!list_empty(&ctx->src_queue)) { 592 src_buf = list_entry(ctx->src_queue.next, 593 struct s5p_mfc_buf, list); 594 list_del(&src_buf->list); 595 ctx->src_queue_cnt--; 596 vb2_buffer_done(&src_buf->b->vb2_buf, 597 VB2_BUF_STATE_DONE); 598 } 599 } else { 600 ctx->dpb_flush_flag = 0; 601 } 602 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); 603 604 s5p_mfc_clock_off(dev); 605 606 wake_up(&ctx->queue); 607 if (ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1) 608 set_work_bit_irqsave(ctx); 609 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); 610 } else { 611 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); 612 613 s5p_mfc_clock_off(dev); 614 615 wake_up(&ctx->queue); 616 } 617} 618 619static void s5p_mfc_handle_stream_complete(struct s5p_mfc_ctx *ctx) 620{ 621 struct s5p_mfc_dev *dev = ctx->dev; 622 struct s5p_mfc_buf *mb_entry; 623 624 mfc_debug(2, "Stream completed\n"); 625 626 ctx->state = MFCINST_FINISHED; 627 628 if (!list_empty(&ctx->dst_queue)) { 629 mb_entry = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, 630 list); 631 list_del(&mb_entry->list); 632 ctx->dst_queue_cnt--; 633 vb2_set_plane_payload(&mb_entry->b->vb2_buf, 0, 0); 634 vb2_buffer_done(&mb_entry->b->vb2_buf, VB2_BUF_STATE_DONE); 635 } 636 637 clear_work_bit(ctx); 638 639 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); 640 641 s5p_mfc_clock_off(dev); 642 wake_up(&ctx->queue); 643 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); 644} 645 646/* Interrupt processing */ 647static irqreturn_t s5p_mfc_irq(int irq, void *priv) 648{ 649 struct s5p_mfc_dev *dev = priv; 650 struct s5p_mfc_ctx *ctx; 651 unsigned int reason; 652 unsigned int err; 653 654 mfc_debug_enter(); 655 /* Reset the timeout watchdog */ 656 atomic_set(&dev->watchdog_cnt, 0); 657 spin_lock(&dev->irqlock); 658 ctx = dev->ctx[dev->curr_ctx]; 659 /* Get the reason of interrupt and the error code */ 660 reason = s5p_mfc_hw_call(dev->mfc_ops, get_int_reason, dev); 661 err = s5p_mfc_hw_call(dev->mfc_ops, get_int_err, dev); 662 mfc_debug(1, "Int reason: %d (err: %08x)\n", reason, err); 663 switch (reason) { 664 case S5P_MFC_R2H_CMD_ERR_RET: 665 /* An error has occurred */ 666 if (ctx->state == MFCINST_RUNNING && 667 (s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) >= 668 dev->warn_start || 669 err == S5P_FIMV_ERR_NO_VALID_SEQ_HDR || 670 err == S5P_FIMV_ERR_INCOMPLETE_FRAME || 671 err == S5P_FIMV_ERR_TIMEOUT)) 672 s5p_mfc_handle_frame(ctx, reason, err); 673 else 674 s5p_mfc_handle_error(dev, ctx, reason, err); 675 clear_bit(0, &dev->enter_suspend); 676 break; 677 678 case S5P_MFC_R2H_CMD_SLICE_DONE_RET: 679 case S5P_MFC_R2H_CMD_FIELD_DONE_RET: 680 case S5P_MFC_R2H_CMD_FRAME_DONE_RET: 681 if (ctx->c_ops->post_frame_start) { 682 if (ctx->c_ops->post_frame_start(ctx)) 683 mfc_err("post_frame_start() failed\n"); 684 685 if (ctx->state == MFCINST_FINISHING && 686 list_empty(&ctx->ref_queue)) { 687 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 688 s5p_mfc_handle_stream_complete(ctx); 689 break; 690 } 691 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 692 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); 693 s5p_mfc_clock_off(dev); 694 wake_up_ctx(ctx, reason, err); 695 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); 696 } else { 697 s5p_mfc_handle_frame(ctx, reason, err); 698 } 699 break; 700 701 case S5P_MFC_R2H_CMD_SEQ_DONE_RET: 702 s5p_mfc_handle_seq_done(ctx, reason, err); 703 break; 704 705 case S5P_MFC_R2H_CMD_OPEN_INSTANCE_RET: 706 ctx->inst_no = s5p_mfc_hw_call(dev->mfc_ops, get_inst_no, dev); 707 ctx->state = MFCINST_GOT_INST; 708 goto irq_cleanup_hw; 709 710 case S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET: 711 ctx->inst_no = MFC_NO_INSTANCE_SET; 712 ctx->state = MFCINST_FREE; 713 goto irq_cleanup_hw; 714 715 case S5P_MFC_R2H_CMD_SYS_INIT_RET: 716 case S5P_MFC_R2H_CMD_FW_STATUS_RET: 717 case S5P_MFC_R2H_CMD_SLEEP_RET: 718 case S5P_MFC_R2H_CMD_WAKEUP_RET: 719 if (ctx) 720 clear_work_bit(ctx); 721 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 722 clear_bit(0, &dev->hw_lock); 723 clear_bit(0, &dev->enter_suspend); 724 wake_up_dev(dev, reason, err); 725 break; 726 727 case S5P_MFC_R2H_CMD_INIT_BUFFERS_RET: 728 s5p_mfc_handle_init_buffers(ctx, reason, err); 729 break; 730 731 case S5P_MFC_R2H_CMD_COMPLETE_SEQ_RET: 732 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 733 ctx->int_type = reason; 734 ctx->int_err = err; 735 s5p_mfc_handle_stream_complete(ctx); 736 break; 737 738 case S5P_MFC_R2H_CMD_DPB_FLUSH_RET: 739 ctx->state = MFCINST_RUNNING; 740 goto irq_cleanup_hw; 741 742 default: 743 mfc_debug(2, "Unknown int reason\n"); 744 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 745 } 746 spin_unlock(&dev->irqlock); 747 mfc_debug_leave(); 748 return IRQ_HANDLED; 749irq_cleanup_hw: 750 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); 751 ctx->int_type = reason; 752 ctx->int_err = err; 753 ctx->int_cond = 1; 754 if (test_and_clear_bit(0, &dev->hw_lock) == 0) 755 mfc_err("Failed to unlock hw\n"); 756 757 s5p_mfc_clock_off(dev); 758 clear_work_bit(ctx); 759 wake_up(&ctx->queue); 760 761 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); 762 spin_unlock(&dev->irqlock); 763 mfc_debug(2, "Exit via irq_cleanup_hw\n"); 764 return IRQ_HANDLED; 765} 766 767/* Open an MFC node */ 768static int s5p_mfc_open(struct file *file) 769{ 770 struct video_device *vdev = video_devdata(file); 771 struct s5p_mfc_dev *dev = video_drvdata(file); 772 struct s5p_mfc_ctx *ctx = NULL; 773 struct vb2_queue *q; 774 int ret = 0; 775 776 mfc_debug_enter(); 777 if (mutex_lock_interruptible(&dev->mfc_mutex)) 778 return -ERESTARTSYS; 779 dev->num_inst++; /* It is guarded by mfc_mutex in vfd */ 780 /* Allocate memory for context */ 781 ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); 782 if (!ctx) { 783 ret = -ENOMEM; 784 goto err_alloc; 785 } 786 init_waitqueue_head(&ctx->queue); 787 v4l2_fh_init(&ctx->fh, vdev); 788 file->private_data = &ctx->fh; 789 v4l2_fh_add(&ctx->fh); 790 ctx->dev = dev; 791 INIT_LIST_HEAD(&ctx->src_queue); 792 INIT_LIST_HEAD(&ctx->dst_queue); 793 ctx->src_queue_cnt = 0; 794 ctx->dst_queue_cnt = 0; 795 ctx->is_422 = 0; 796 ctx->is_10bit = 0; 797 /* Get context number */ 798 ctx->num = 0; 799 while (dev->ctx[ctx->num]) { 800 ctx->num++; 801 if (ctx->num >= MFC_NUM_CONTEXTS) { 802 mfc_debug(2, "Too many open contexts\n"); 803 ret = -EBUSY; 804 goto err_no_ctx; 805 } 806 } 807 /* Mark context as idle */ 808 clear_work_bit_irqsave(ctx); 809 dev->ctx[ctx->num] = ctx; 810 if (vdev == dev->vfd_dec) { 811 ctx->type = MFCINST_DECODER; 812 ctx->c_ops = get_dec_codec_ops(); 813 s5p_mfc_dec_init(ctx); 814 /* Setup ctrl handler */ 815 ret = s5p_mfc_dec_ctrls_setup(ctx); 816 if (ret) { 817 mfc_err("Failed to setup mfc controls\n"); 818 goto err_ctrls_setup; 819 } 820 } else if (vdev == dev->vfd_enc) { 821 ctx->type = MFCINST_ENCODER; 822 ctx->c_ops = get_enc_codec_ops(); 823 /* only for encoder */ 824 INIT_LIST_HEAD(&ctx->ref_queue); 825 ctx->ref_queue_cnt = 0; 826 s5p_mfc_enc_init(ctx); 827 /* Setup ctrl handler */ 828 ret = s5p_mfc_enc_ctrls_setup(ctx); 829 if (ret) { 830 mfc_err("Failed to setup mfc controls\n"); 831 goto err_ctrls_setup; 832 } 833 } else { 834 ret = -ENOENT; 835 goto err_bad_node; 836 } 837 ctx->fh.ctrl_handler = &ctx->ctrl_handler; 838 ctx->inst_no = MFC_NO_INSTANCE_SET; 839 /* Load firmware if this is the first instance */ 840 if (dev->num_inst == 1) { 841 dev->watchdog_timer.expires = jiffies + 842 msecs_to_jiffies(MFC_WATCHDOG_INTERVAL); 843 add_timer(&dev->watchdog_timer); 844 ret = s5p_mfc_power_on(dev); 845 if (ret < 0) { 846 mfc_err("power on failed\n"); 847 goto err_pwr_enable; 848 } 849 s5p_mfc_clock_on(dev); 850 ret = s5p_mfc_load_firmware(dev); 851 if (ret) { 852 s5p_mfc_clock_off(dev); 853 goto err_load_fw; 854 } 855 /* Init the FW */ 856 ret = s5p_mfc_init_hw(dev); 857 s5p_mfc_clock_off(dev); 858 if (ret) 859 goto err_init_hw; 860 } 861 /* Init videobuf2 queue for CAPTURE */ 862 q = &ctx->vq_dst; 863 q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; 864 q->drv_priv = &ctx->fh; 865 q->lock = &dev->mfc_mutex; 866 if (vdev == dev->vfd_dec) { 867 q->io_modes = VB2_MMAP; 868 q->ops = get_dec_queue_ops(); 869 } else if (vdev == dev->vfd_enc) { 870 q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; 871 q->ops = get_enc_queue_ops(); 872 } else { 873 ret = -ENOENT; 874 goto err_queue_init; 875 } 876 /* 877 * We'll do mostly sequential access, so sacrifice TLB efficiency for 878 * faster allocation. 879 */ 880 q->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES; 881 q->mem_ops = &vb2_dma_contig_memops; 882 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; 883 ret = vb2_queue_init(q); 884 if (ret) { 885 mfc_err("Failed to initialize videobuf2 queue(capture)\n"); 886 goto err_queue_init; 887 } 888 /* Init videobuf2 queue for OUTPUT */ 889 q = &ctx->vq_src; 890 q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; 891 q->drv_priv = &ctx->fh; 892 q->lock = &dev->mfc_mutex; 893 if (vdev == dev->vfd_dec) { 894 q->io_modes = VB2_MMAP; 895 q->ops = get_dec_queue_ops(); 896 } else if (vdev == dev->vfd_enc) { 897 q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; 898 q->ops = get_enc_queue_ops(); 899 } else { 900 ret = -ENOENT; 901 goto err_queue_init; 902 } 903 /* One way to indicate end-of-stream for MFC is to set the 904 * bytesused == 0. However by default videobuf2 handles bytesused 905 * equal to 0 as a special case and changes its value to the size 906 * of the buffer. Set the allow_zero_bytesused flag so that videobuf2 907 * will keep the value of bytesused intact. 908 */ 909 q->allow_zero_bytesused = 1; 910 911 /* 912 * We'll do mostly sequential access, so sacrifice TLB efficiency for 913 * faster allocation. 914 */ 915 q->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES; 916 q->mem_ops = &vb2_dma_contig_memops; 917 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; 918 ret = vb2_queue_init(q); 919 if (ret) { 920 mfc_err("Failed to initialize videobuf2 queue(output)\n"); 921 goto err_queue_init; 922 } 923 mutex_unlock(&dev->mfc_mutex); 924 mfc_debug_leave(); 925 return ret; 926 /* Deinit when failure occurred */ 927err_queue_init: 928 if (dev->num_inst == 1) 929 s5p_mfc_deinit_hw(dev); 930err_init_hw: 931err_load_fw: 932err_pwr_enable: 933 if (dev->num_inst == 1) { 934 if (s5p_mfc_power_off(dev) < 0) 935 mfc_err("power off failed\n"); 936 del_timer_sync(&dev->watchdog_timer); 937 } 938err_ctrls_setup: 939 s5p_mfc_dec_ctrls_delete(ctx); 940err_bad_node: 941 dev->ctx[ctx->num] = NULL; 942err_no_ctx: 943 v4l2_fh_del(&ctx->fh); 944 v4l2_fh_exit(&ctx->fh); 945 kfree(ctx); 946err_alloc: 947 dev->num_inst--; 948 mutex_unlock(&dev->mfc_mutex); 949 mfc_debug_leave(); 950 return ret; 951} 952 953/* Release MFC context */ 954static int s5p_mfc_release(struct file *file) 955{ 956 struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data); 957 struct s5p_mfc_dev *dev = ctx->dev; 958 959 /* if dev is null, do cleanup that doesn't need dev */ 960 mfc_debug_enter(); 961 if (dev) 962 mutex_lock(&dev->mfc_mutex); 963 vb2_queue_release(&ctx->vq_src); 964 vb2_queue_release(&ctx->vq_dst); 965 if (dev) { 966 s5p_mfc_clock_on(dev); 967 968 /* Mark context as idle */ 969 clear_work_bit_irqsave(ctx); 970 /* 971 * If instance was initialised and not yet freed, 972 * return instance and free resources 973 */ 974 if (ctx->state != MFCINST_FREE && ctx->state != MFCINST_INIT) { 975 mfc_debug(2, "Has to free instance\n"); 976 s5p_mfc_close_mfc_inst(dev, ctx); 977 } 978 /* hardware locking scheme */ 979 if (dev->curr_ctx == ctx->num) 980 clear_bit(0, &dev->hw_lock); 981 dev->num_inst--; 982 if (dev->num_inst == 0) { 983 mfc_debug(2, "Last instance\n"); 984 s5p_mfc_deinit_hw(dev); 985 del_timer_sync(&dev->watchdog_timer); 986 s5p_mfc_clock_off(dev); 987 if (s5p_mfc_power_off(dev) < 0) 988 mfc_err("Power off failed\n"); 989 } else { 990 mfc_debug(2, "Shutting down clock\n"); 991 s5p_mfc_clock_off(dev); 992 } 993 } 994 if (dev) 995 dev->ctx[ctx->num] = NULL; 996 s5p_mfc_dec_ctrls_delete(ctx); 997 v4l2_fh_del(&ctx->fh); 998 /* vdev is gone if dev is null */ 999 if (dev) 1000 v4l2_fh_exit(&ctx->fh); 1001 kfree(ctx); 1002 mfc_debug_leave(); 1003 if (dev) 1004 mutex_unlock(&dev->mfc_mutex); 1005 1006 return 0; 1007} 1008 1009/* Poll */ 1010static __poll_t s5p_mfc_poll(struct file *file, 1011 struct poll_table_struct *wait) 1012{ 1013 struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data); 1014 struct s5p_mfc_dev *dev = ctx->dev; 1015 struct vb2_queue *src_q, *dst_q; 1016 struct vb2_buffer *src_vb = NULL, *dst_vb = NULL; 1017 __poll_t rc = 0; 1018 unsigned long flags; 1019 1020 mutex_lock(&dev->mfc_mutex); 1021 src_q = &ctx->vq_src; 1022 dst_q = &ctx->vq_dst; 1023 /* 1024 * There has to be at least one buffer queued on each queued_list, which 1025 * means either in driver already or waiting for driver to claim it 1026 * and start processing. 1027 */ 1028 if ((!vb2_is_streaming(src_q) || list_empty(&src_q->queued_list)) && 1029 (!vb2_is_streaming(dst_q) || list_empty(&dst_q->queued_list))) { 1030 rc = EPOLLERR; 1031 goto end; 1032 } 1033 mutex_unlock(&dev->mfc_mutex); 1034 poll_wait(file, &ctx->fh.wait, wait); 1035 poll_wait(file, &src_q->done_wq, wait); 1036 poll_wait(file, &dst_q->done_wq, wait); 1037 mutex_lock(&dev->mfc_mutex); 1038 if (v4l2_event_pending(&ctx->fh)) 1039 rc |= EPOLLPRI; 1040 spin_lock_irqsave(&src_q->done_lock, flags); 1041 if (!list_empty(&src_q->done_list)) 1042 src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer, 1043 done_entry); 1044 if (src_vb && (src_vb->state == VB2_BUF_STATE_DONE 1045 || src_vb->state == VB2_BUF_STATE_ERROR)) 1046 rc |= EPOLLOUT | EPOLLWRNORM; 1047 spin_unlock_irqrestore(&src_q->done_lock, flags); 1048 spin_lock_irqsave(&dst_q->done_lock, flags); 1049 if (!list_empty(&dst_q->done_list)) 1050 dst_vb = list_first_entry(&dst_q->done_list, struct vb2_buffer, 1051 done_entry); 1052 if (dst_vb && (dst_vb->state == VB2_BUF_STATE_DONE 1053 || dst_vb->state == VB2_BUF_STATE_ERROR)) 1054 rc |= EPOLLIN | EPOLLRDNORM; 1055 spin_unlock_irqrestore(&dst_q->done_lock, flags); 1056end: 1057 mutex_unlock(&dev->mfc_mutex); 1058 return rc; 1059} 1060 1061/* Mmap */ 1062static int s5p_mfc_mmap(struct file *file, struct vm_area_struct *vma) 1063{ 1064 struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data); 1065 unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; 1066 int ret; 1067 1068 if (offset < DST_QUEUE_OFF_BASE) { 1069 mfc_debug(2, "mmapping source\n"); 1070 ret = vb2_mmap(&ctx->vq_src, vma); 1071 } else { /* capture */ 1072 mfc_debug(2, "mmapping destination\n"); 1073 vma->vm_pgoff -= (DST_QUEUE_OFF_BASE >> PAGE_SHIFT); 1074 ret = vb2_mmap(&ctx->vq_dst, vma); 1075 } 1076 return ret; 1077} 1078 1079/* v4l2 ops */ 1080static const struct v4l2_file_operations s5p_mfc_fops = { 1081 .owner = THIS_MODULE, 1082 .open = s5p_mfc_open, 1083 .release = s5p_mfc_release, 1084 .poll = s5p_mfc_poll, 1085 .unlocked_ioctl = video_ioctl2, 1086 .mmap = s5p_mfc_mmap, 1087}; 1088 1089/* DMA memory related helper functions */ 1090static void s5p_mfc_memdev_release(struct device *dev) 1091{ 1092 of_reserved_mem_device_release(dev); 1093} 1094 1095static struct device *s5p_mfc_alloc_memdev(struct device *dev, 1096 const char *name, unsigned int idx) 1097{ 1098 struct device *child; 1099 int ret; 1100 1101 child = devm_kzalloc(dev, sizeof(*child), GFP_KERNEL); 1102 if (!child) 1103 return NULL; 1104 1105 device_initialize(child); 1106 dev_set_name(child, "%s:%s", dev_name(dev), name); 1107 child->parent = dev; 1108 child->coherent_dma_mask = dev->coherent_dma_mask; 1109 child->dma_mask = dev->dma_mask; 1110 child->release = s5p_mfc_memdev_release; 1111 child->dma_parms = devm_kzalloc(dev, sizeof(*child->dma_parms), 1112 GFP_KERNEL); 1113 if (!child->dma_parms) 1114 goto err; 1115 1116 /* 1117 * The memdevs are not proper OF platform devices, so in order for them 1118 * to be treated as valid DMA masters we need a bit of a hack to force 1119 * them to inherit the MFC node's DMA configuration. 1120 */ 1121 of_dma_configure(child, dev->of_node, true); 1122 1123 if (device_add(child) == 0) { 1124 ret = of_reserved_mem_device_init_by_idx(child, dev->of_node, 1125 idx); 1126 if (ret == 0) 1127 return child; 1128 device_del(child); 1129 } 1130err: 1131 put_device(child); 1132 return NULL; 1133} 1134 1135static int s5p_mfc_configure_2port_memory(struct s5p_mfc_dev *mfc_dev) 1136{ 1137 struct device *dev = &mfc_dev->plat_dev->dev; 1138 void *bank2_virt; 1139 dma_addr_t bank2_dma_addr; 1140 unsigned long align_size = 1 << MFC_BASE_ALIGN_ORDER; 1141 int ret; 1142 1143 /* 1144 * Create and initialize virtual devices for accessing 1145 * reserved memory regions. 1146 */ 1147 mfc_dev->mem_dev[BANK_L_CTX] = s5p_mfc_alloc_memdev(dev, "left", 1148 BANK_L_CTX); 1149 if (!mfc_dev->mem_dev[BANK_L_CTX]) 1150 return -ENODEV; 1151 mfc_dev->mem_dev[BANK_R_CTX] = s5p_mfc_alloc_memdev(dev, "right", 1152 BANK_R_CTX); 1153 if (!mfc_dev->mem_dev[BANK_R_CTX]) { 1154 device_unregister(mfc_dev->mem_dev[BANK_L_CTX]); 1155 return -ENODEV; 1156 } 1157 1158 /* Allocate memory for firmware and initialize both banks addresses */ 1159 ret = s5p_mfc_alloc_firmware(mfc_dev); 1160 if (ret) { 1161 device_unregister(mfc_dev->mem_dev[BANK_R_CTX]); 1162 device_unregister(mfc_dev->mem_dev[BANK_L_CTX]); 1163 return ret; 1164 } 1165 1166 mfc_dev->dma_base[BANK_L_CTX] = mfc_dev->fw_buf.dma; 1167 1168 bank2_virt = dma_alloc_coherent(mfc_dev->mem_dev[BANK_R_CTX], 1169 align_size, &bank2_dma_addr, GFP_KERNEL); 1170 if (!bank2_virt) { 1171 s5p_mfc_release_firmware(mfc_dev); 1172 device_unregister(mfc_dev->mem_dev[BANK_R_CTX]); 1173 device_unregister(mfc_dev->mem_dev[BANK_L_CTX]); 1174 return -ENOMEM; 1175 } 1176 1177 /* Valid buffers passed to MFC encoder with LAST_FRAME command 1178 * should not have address of bank2 - MFC will treat it as a null frame. 1179 * To avoid such situation we set bank2 address below the pool address. 1180 */ 1181 mfc_dev->dma_base[BANK_R_CTX] = bank2_dma_addr - align_size; 1182 1183 dma_free_coherent(mfc_dev->mem_dev[BANK_R_CTX], align_size, bank2_virt, 1184 bank2_dma_addr); 1185 1186 vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK_L_CTX], 1187 DMA_BIT_MASK(32)); 1188 vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK_R_CTX], 1189 DMA_BIT_MASK(32)); 1190 1191 return 0; 1192} 1193 1194static void s5p_mfc_unconfigure_2port_memory(struct s5p_mfc_dev *mfc_dev) 1195{ 1196 device_unregister(mfc_dev->mem_dev[BANK_L_CTX]); 1197 device_unregister(mfc_dev->mem_dev[BANK_R_CTX]); 1198 vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK_L_CTX]); 1199 vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK_R_CTX]); 1200} 1201 1202static int s5p_mfc_configure_common_memory(struct s5p_mfc_dev *mfc_dev) 1203{ 1204 struct device *dev = &mfc_dev->plat_dev->dev; 1205 unsigned long mem_size = SZ_4M; 1206 1207 if (IS_ENABLED(CONFIG_DMA_CMA) || exynos_is_iommu_available(dev)) 1208 mem_size = SZ_8M; 1209 1210 if (mfc_mem_size) 1211 mem_size = memparse(mfc_mem_size, NULL); 1212 1213 mfc_dev->mem_bitmap = bitmap_zalloc(mem_size >> PAGE_SHIFT, GFP_KERNEL); 1214 if (!mfc_dev->mem_bitmap) 1215 return -ENOMEM; 1216 1217 mfc_dev->mem_virt = dma_alloc_coherent(dev, mem_size, 1218 &mfc_dev->mem_base, GFP_KERNEL); 1219 if (!mfc_dev->mem_virt) { 1220 bitmap_free(mfc_dev->mem_bitmap); 1221 dev_err(dev, "failed to preallocate %ld MiB for the firmware and context buffers\n", 1222 (mem_size / SZ_1M)); 1223 return -ENOMEM; 1224 } 1225 mfc_dev->mem_size = mem_size; 1226 mfc_dev->dma_base[BANK_L_CTX] = mfc_dev->mem_base; 1227 mfc_dev->dma_base[BANK_R_CTX] = mfc_dev->mem_base; 1228 1229 /* 1230 * MFC hardware cannot handle 0 as a base address, so mark first 128K 1231 * as used (to keep required base alignment) and adjust base address 1232 */ 1233 if (mfc_dev->mem_base == (dma_addr_t)0) { 1234 unsigned int offset = 1 << MFC_BASE_ALIGN_ORDER; 1235 1236 bitmap_set(mfc_dev->mem_bitmap, 0, offset >> PAGE_SHIFT); 1237 mfc_dev->dma_base[BANK_L_CTX] += offset; 1238 mfc_dev->dma_base[BANK_R_CTX] += offset; 1239 } 1240 1241 /* Firmware allocation cannot fail in this case */ 1242 s5p_mfc_alloc_firmware(mfc_dev); 1243 1244 mfc_dev->mem_dev[BANK_L_CTX] = mfc_dev->mem_dev[BANK_R_CTX] = dev; 1245 vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32)); 1246 1247 dev_info(dev, "preallocated %ld MiB buffer for the firmware and context buffers\n", 1248 (mem_size / SZ_1M)); 1249 1250 return 0; 1251} 1252 1253static void s5p_mfc_unconfigure_common_memory(struct s5p_mfc_dev *mfc_dev) 1254{ 1255 struct device *dev = &mfc_dev->plat_dev->dev; 1256 1257 dma_free_coherent(dev, mfc_dev->mem_size, mfc_dev->mem_virt, 1258 mfc_dev->mem_base); 1259 bitmap_free(mfc_dev->mem_bitmap); 1260 vb2_dma_contig_clear_max_seg_size(dev); 1261} 1262 1263static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev) 1264{ 1265 struct device *dev = &mfc_dev->plat_dev->dev; 1266 1267 if (exynos_is_iommu_available(dev) || !IS_TWOPORT(mfc_dev)) 1268 return s5p_mfc_configure_common_memory(mfc_dev); 1269 else 1270 return s5p_mfc_configure_2port_memory(mfc_dev); 1271} 1272 1273static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev) 1274{ 1275 struct device *dev = &mfc_dev->plat_dev->dev; 1276 1277 s5p_mfc_release_firmware(mfc_dev); 1278 if (exynos_is_iommu_available(dev) || !IS_TWOPORT(mfc_dev)) 1279 s5p_mfc_unconfigure_common_memory(mfc_dev); 1280 else 1281 s5p_mfc_unconfigure_2port_memory(mfc_dev); 1282} 1283 1284/* MFC probe function */ 1285static int s5p_mfc_probe(struct platform_device *pdev) 1286{ 1287 struct s5p_mfc_dev *dev; 1288 struct video_device *vfd; 1289 int ret; 1290 1291 pr_debug("%s++\n", __func__); 1292 dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); 1293 if (!dev) 1294 return -ENOMEM; 1295 1296 spin_lock_init(&dev->irqlock); 1297 spin_lock_init(&dev->condlock); 1298 dev->plat_dev = pdev; 1299 if (!dev->plat_dev) { 1300 mfc_err("No platform data specified\n"); 1301 return -ENODEV; 1302 } 1303 1304 dev->variant = of_device_get_match_data(&pdev->dev); 1305 if (!dev->variant) { 1306 dev_err(&pdev->dev, "Failed to get device MFC hardware variant information\n"); 1307 return -ENOENT; 1308 } 1309 1310 dev->regs_base = devm_platform_ioremap_resource(pdev, 0); 1311 if (IS_ERR(dev->regs_base)) 1312 return PTR_ERR(dev->regs_base); 1313 1314 ret = platform_get_irq(pdev, 0); 1315 if (ret < 0) 1316 return ret; 1317 dev->irq = ret; 1318 ret = devm_request_irq(&pdev->dev, dev->irq, s5p_mfc_irq, 1319 0, pdev->name, dev); 1320 if (ret) { 1321 dev_err(&pdev->dev, "Failed to install irq (%d)\n", ret); 1322 return ret; 1323 } 1324 1325 ret = s5p_mfc_configure_dma_memory(dev); 1326 if (ret < 0) { 1327 dev_err(&pdev->dev, "failed to configure DMA memory\n"); 1328 return ret; 1329 } 1330 1331 ret = s5p_mfc_init_pm(dev); 1332 if (ret < 0) { 1333 dev_err(&pdev->dev, "failed to get mfc clock source\n"); 1334 goto err_dma; 1335 } 1336 1337 /* 1338 * Load fails if fs isn't mounted. Try loading anyway. 1339 * _open() will load it, it fails now. Ignore failure. 1340 */ 1341 s5p_mfc_load_firmware(dev); 1342 1343 mutex_init(&dev->mfc_mutex); 1344 init_waitqueue_head(&dev->queue); 1345 dev->hw_lock = 0; 1346 INIT_WORK(&dev->watchdog_work, s5p_mfc_watchdog_worker); 1347 atomic_set(&dev->watchdog_cnt, 0); 1348 timer_setup(&dev->watchdog_timer, s5p_mfc_watchdog, 0); 1349 1350 ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); 1351 if (ret) 1352 goto err_v4l2_dev_reg; 1353 1354 /* decoder */ 1355 vfd = video_device_alloc(); 1356 if (!vfd) { 1357 v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n"); 1358 ret = -ENOMEM; 1359 goto err_dec_alloc; 1360 } 1361 vfd->fops = &s5p_mfc_fops; 1362 vfd->ioctl_ops = get_dec_v4l2_ioctl_ops(); 1363 vfd->release = video_device_release; 1364 vfd->lock = &dev->mfc_mutex; 1365 vfd->v4l2_dev = &dev->v4l2_dev; 1366 vfd->vfl_dir = VFL_DIR_M2M; 1367 vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; 1368 set_bit(V4L2_FL_QUIRK_INVERTED_CROP, &vfd->flags); 1369 snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_DEC_NAME); 1370 dev->vfd_dec = vfd; 1371 video_set_drvdata(vfd, dev); 1372 1373 /* encoder */ 1374 vfd = video_device_alloc(); 1375 if (!vfd) { 1376 v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n"); 1377 ret = -ENOMEM; 1378 goto err_enc_alloc; 1379 } 1380 vfd->fops = &s5p_mfc_fops; 1381 vfd->ioctl_ops = get_enc_v4l2_ioctl_ops(); 1382 vfd->release = video_device_release; 1383 vfd->lock = &dev->mfc_mutex; 1384 vfd->v4l2_dev = &dev->v4l2_dev; 1385 vfd->vfl_dir = VFL_DIR_M2M; 1386 vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; 1387 snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_ENC_NAME); 1388 dev->vfd_enc = vfd; 1389 video_set_drvdata(vfd, dev); 1390 platform_set_drvdata(pdev, dev); 1391 1392 /* Initialize HW ops and commands based on MFC version */ 1393 s5p_mfc_init_hw_ops(dev); 1394 s5p_mfc_init_hw_cmds(dev); 1395 s5p_mfc_init_regs(dev); 1396 1397 /* Register decoder and encoder */ 1398 ret = video_register_device(dev->vfd_dec, VFL_TYPE_VIDEO, 0); 1399 if (ret) { 1400 v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); 1401 goto err_dec_reg; 1402 } 1403 v4l2_info(&dev->v4l2_dev, 1404 "decoder registered as /dev/video%d\n", dev->vfd_dec->num); 1405 1406 ret = video_register_device(dev->vfd_enc, VFL_TYPE_VIDEO, 0); 1407 if (ret) { 1408 v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); 1409 goto err_enc_reg; 1410 } 1411 v4l2_info(&dev->v4l2_dev, 1412 "encoder registered as /dev/video%d\n", dev->vfd_enc->num); 1413 1414 pr_debug("%s--\n", __func__); 1415 return 0; 1416 1417/* Deinit MFC if probe had failed */ 1418err_enc_reg: 1419 video_unregister_device(dev->vfd_dec); 1420 dev->vfd_dec = NULL; 1421err_dec_reg: 1422 video_device_release(dev->vfd_enc); 1423err_enc_alloc: 1424 video_device_release(dev->vfd_dec); 1425err_dec_alloc: 1426 v4l2_device_unregister(&dev->v4l2_dev); 1427err_v4l2_dev_reg: 1428 s5p_mfc_final_pm(dev); 1429err_dma: 1430 s5p_mfc_unconfigure_dma_memory(dev); 1431 1432 pr_debug("%s-- with error\n", __func__); 1433 return ret; 1434 1435} 1436 1437/* Remove the driver */ 1438static void s5p_mfc_remove(struct platform_device *pdev) 1439{ 1440 struct s5p_mfc_dev *dev = platform_get_drvdata(pdev); 1441 struct s5p_mfc_ctx *ctx; 1442 int i; 1443 1444 v4l2_info(&dev->v4l2_dev, "Removing %s\n", pdev->name); 1445 1446 /* 1447 * Clear ctx dev pointer to avoid races between s5p_mfc_remove() 1448 * and s5p_mfc_release() and s5p_mfc_release() accessing ctx->dev 1449 * after s5p_mfc_remove() is run during unbind. 1450 */ 1451 mutex_lock(&dev->mfc_mutex); 1452 for (i = 0; i < MFC_NUM_CONTEXTS; i++) { 1453 ctx = dev->ctx[i]; 1454 if (!ctx) 1455 continue; 1456 /* clear ctx->dev */ 1457 ctx->dev = NULL; 1458 } 1459 mutex_unlock(&dev->mfc_mutex); 1460 1461 del_timer_sync(&dev->watchdog_timer); 1462 flush_work(&dev->watchdog_work); 1463 1464 video_unregister_device(dev->vfd_enc); 1465 video_unregister_device(dev->vfd_dec); 1466 v4l2_device_unregister(&dev->v4l2_dev); 1467 s5p_mfc_unconfigure_dma_memory(dev); 1468 1469 s5p_mfc_final_pm(dev); 1470} 1471 1472#ifdef CONFIG_PM_SLEEP 1473 1474static int s5p_mfc_suspend(struct device *dev) 1475{ 1476 struct s5p_mfc_dev *m_dev = dev_get_drvdata(dev); 1477 int ret; 1478 1479 if (m_dev->num_inst == 0) 1480 return 0; 1481 1482 if (test_and_set_bit(0, &m_dev->enter_suspend) != 0) { 1483 mfc_err("Error: going to suspend for a second time\n"); 1484 return -EIO; 1485 } 1486 1487 /* Check if we're processing then wait if it necessary. */ 1488 while (test_and_set_bit(0, &m_dev->hw_lock) != 0) { 1489 /* Try and lock the HW */ 1490 /* Wait on the interrupt waitqueue */ 1491 ret = wait_event_interruptible_timeout(m_dev->queue, 1492 m_dev->int_cond, msecs_to_jiffies(MFC_INT_TIMEOUT)); 1493 if (ret == 0) { 1494 mfc_err("Waiting for hardware to finish timed out\n"); 1495 clear_bit(0, &m_dev->enter_suspend); 1496 return -EIO; 1497 } 1498 } 1499 1500 ret = s5p_mfc_sleep(m_dev); 1501 if (ret) { 1502 clear_bit(0, &m_dev->enter_suspend); 1503 clear_bit(0, &m_dev->hw_lock); 1504 } 1505 return ret; 1506} 1507 1508static int s5p_mfc_resume(struct device *dev) 1509{ 1510 struct s5p_mfc_dev *m_dev = dev_get_drvdata(dev); 1511 1512 if (m_dev->num_inst == 0) 1513 return 0; 1514 return s5p_mfc_wakeup(m_dev); 1515} 1516#endif 1517 1518/* Power management */ 1519static const struct dev_pm_ops s5p_mfc_pm_ops = { 1520 SET_SYSTEM_SLEEP_PM_OPS(s5p_mfc_suspend, s5p_mfc_resume) 1521}; 1522 1523static const struct s5p_mfc_buf_size_v5 mfc_buf_size_v5 = { 1524 .h264_ctx = MFC_H264_CTX_BUF_SIZE, 1525 .non_h264_ctx = MFC_CTX_BUF_SIZE, 1526 .dsc = DESC_BUF_SIZE, 1527 .shm = SHARED_BUF_SIZE, 1528}; 1529 1530static const struct s5p_mfc_buf_size buf_size_v5 = { 1531 .fw = MAX_FW_SIZE, 1532 .cpb = MAX_CPB_SIZE, 1533 .priv = &mfc_buf_size_v5, 1534}; 1535 1536static const struct s5p_mfc_variant mfc_drvdata_v5 = { 1537 .version = MFC_VERSION, 1538 .version_bit = MFC_V5_BIT, 1539 .port_num = MFC_NUM_PORTS, 1540 .buf_size = &buf_size_v5, 1541 .fw_name[0] = "s5p-mfc.fw", 1542 .clk_names = {"mfc", "sclk_mfc"}, 1543 .num_clocks = 2, 1544 .use_clock_gating = true, 1545}; 1546 1547static const struct s5p_mfc_buf_size_v6 mfc_buf_size_v6 = { 1548 .dev_ctx = MFC_CTX_BUF_SIZE_V6, 1549 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V6, 1550 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V6, 1551 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V6, 1552 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V6, 1553}; 1554 1555static const struct s5p_mfc_buf_size buf_size_v6 = { 1556 .fw = MAX_FW_SIZE_V6, 1557 .cpb = MAX_CPB_SIZE_V6, 1558 .priv = &mfc_buf_size_v6, 1559}; 1560 1561static const struct s5p_mfc_variant mfc_drvdata_v6 = { 1562 .version = MFC_VERSION_V6, 1563 .version_bit = MFC_V6_BIT, 1564 .port_num = MFC_NUM_PORTS_V6, 1565 .buf_size = &buf_size_v6, 1566 .fw_name[0] = "s5p-mfc-v6.fw", 1567 /* 1568 * v6-v2 firmware contains bug fixes and interface change 1569 * for init buffer command 1570 */ 1571 .fw_name[1] = "s5p-mfc-v6-v2.fw", 1572 .clk_names = {"mfc"}, 1573 .num_clocks = 1, 1574}; 1575 1576static const struct s5p_mfc_buf_size_v6 mfc_buf_size_v7 = { 1577 .dev_ctx = MFC_CTX_BUF_SIZE_V7, 1578 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V7, 1579 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V7, 1580 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V7, 1581 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V7, 1582}; 1583 1584static const struct s5p_mfc_buf_size buf_size_v7 = { 1585 .fw = MAX_FW_SIZE_V7, 1586 .cpb = MAX_CPB_SIZE_V7, 1587 .priv = &mfc_buf_size_v7, 1588}; 1589 1590static const struct s5p_mfc_variant mfc_drvdata_v7 = { 1591 .version = MFC_VERSION_V7, 1592 .version_bit = MFC_V7_BIT, 1593 .port_num = MFC_NUM_PORTS_V7, 1594 .buf_size = &buf_size_v7, 1595 .fw_name[0] = "s5p-mfc-v7.fw", 1596 .clk_names = {"mfc"}, 1597 .num_clocks = 1, 1598}; 1599 1600static const struct s5p_mfc_variant mfc_drvdata_v7_3250 = { 1601 .version = MFC_VERSION_V7, 1602 .version_bit = MFC_V7_BIT, 1603 .port_num = MFC_NUM_PORTS_V7, 1604 .buf_size = &buf_size_v7, 1605 .fw_name[0] = "s5p-mfc-v7.fw", 1606 .clk_names = {"mfc", "sclk_mfc"}, 1607 .num_clocks = 2, 1608}; 1609 1610static const struct s5p_mfc_buf_size_v6 mfc_buf_size_v8 = { 1611 .dev_ctx = MFC_CTX_BUF_SIZE_V8, 1612 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V8, 1613 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V8, 1614 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V8, 1615 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V8, 1616}; 1617 1618static const struct s5p_mfc_buf_size buf_size_v8 = { 1619 .fw = MAX_FW_SIZE_V8, 1620 .cpb = MAX_CPB_SIZE_V8, 1621 .priv = &mfc_buf_size_v8, 1622}; 1623 1624static const struct s5p_mfc_variant mfc_drvdata_v8 = { 1625 .version = MFC_VERSION_V8, 1626 .version_bit = MFC_V8_BIT, 1627 .port_num = MFC_NUM_PORTS_V8, 1628 .buf_size = &buf_size_v8, 1629 .fw_name[0] = "s5p-mfc-v8.fw", 1630 .clk_names = {"mfc"}, 1631 .num_clocks = 1, 1632}; 1633 1634static const struct s5p_mfc_variant mfc_drvdata_v8_5433 = { 1635 .version = MFC_VERSION_V8, 1636 .version_bit = MFC_V8_BIT, 1637 .port_num = MFC_NUM_PORTS_V8, 1638 .buf_size = &buf_size_v8, 1639 .fw_name[0] = "s5p-mfc-v8.fw", 1640 .clk_names = {"pclk", "aclk", "aclk_xiu"}, 1641 .num_clocks = 3, 1642}; 1643 1644static const struct s5p_mfc_buf_size_v6 mfc_buf_size_v10 = { 1645 .dev_ctx = MFC_CTX_BUF_SIZE_V10, 1646 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V10, 1647 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V10, 1648 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V10, 1649 .hevc_enc_ctx = MFC_HEVC_ENC_CTX_BUF_SIZE_V10, 1650 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V10, 1651}; 1652 1653static const struct s5p_mfc_buf_size buf_size_v10 = { 1654 .fw = MAX_FW_SIZE_V10, 1655 .cpb = MAX_CPB_SIZE_V10, 1656 .priv = &mfc_buf_size_v10, 1657}; 1658 1659static const struct s5p_mfc_variant mfc_drvdata_v10 = { 1660 .version = MFC_VERSION_V10, 1661 .version_bit = MFC_V10_BIT, 1662 .port_num = MFC_NUM_PORTS_V10, 1663 .buf_size = &buf_size_v10, 1664 .fw_name[0] = "s5p-mfc-v10.fw", 1665}; 1666 1667static struct s5p_mfc_buf_size_v6 mfc_buf_size_v12 = { 1668 .dev_ctx = MFC_CTX_BUF_SIZE_V12, 1669 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V12, 1670 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V12, 1671 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V12, 1672 .hevc_enc_ctx = MFC_HEVC_ENC_CTX_BUF_SIZE_V12, 1673 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V12, 1674}; 1675 1676static struct s5p_mfc_buf_size buf_size_v12 = { 1677 .fw = MAX_FW_SIZE_V12, 1678 .cpb = MAX_CPB_SIZE_V12, 1679 .priv = &mfc_buf_size_v12, 1680}; 1681 1682static struct s5p_mfc_variant mfc_drvdata_v12 = { 1683 .version = MFC_VERSION_V12, 1684 .version_bit = MFC_V12_BIT, 1685 .port_num = MFC_NUM_PORTS_V12, 1686 .buf_size = &buf_size_v12, 1687 .fw_name[0] = "s5p-mfc-v12.fw", 1688 .clk_names = {"mfc"}, 1689 .num_clocks = 1, 1690}; 1691 1692static const struct of_device_id exynos_mfc_match[] = { 1693 { 1694 .compatible = "samsung,mfc-v5", 1695 .data = &mfc_drvdata_v5, 1696 }, { 1697 .compatible = "samsung,mfc-v6", 1698 .data = &mfc_drvdata_v6, 1699 }, { 1700 .compatible = "samsung,mfc-v7", 1701 .data = &mfc_drvdata_v7, 1702 }, { 1703 .compatible = "samsung,exynos3250-mfc", 1704 .data = &mfc_drvdata_v7_3250, 1705 }, { 1706 .compatible = "samsung,mfc-v8", 1707 .data = &mfc_drvdata_v8, 1708 }, { 1709 .compatible = "samsung,exynos5433-mfc", 1710 .data = &mfc_drvdata_v8_5433, 1711 }, { 1712 .compatible = "samsung,mfc-v10", 1713 .data = &mfc_drvdata_v10, 1714 }, { 1715 .compatible = "tesla,fsd-mfc", 1716 .data = &mfc_drvdata_v12, 1717 }, 1718 {}, 1719}; 1720MODULE_DEVICE_TABLE(of, exynos_mfc_match); 1721 1722static struct platform_driver s5p_mfc_driver = { 1723 .probe = s5p_mfc_probe, 1724 .remove_new = s5p_mfc_remove, 1725 .driver = { 1726 .name = S5P_MFC_NAME, 1727 .pm = &s5p_mfc_pm_ops, 1728 .of_match_table = exynos_mfc_match, 1729 }, 1730}; 1731 1732module_platform_driver(s5p_mfc_driver); 1733 1734MODULE_LICENSE("GPL"); 1735MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); 1736MODULE_DESCRIPTION("Samsung S5P Multi Format Codec V4L2 driver"); 1737 1738