1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2012-2016 Synaptics Incorporated 4 */ 5#include <linux/input.h> 6#include <linux/input/mt.h> 7#include <linux/rmi.h> 8#include "rmi_driver.h" 9#include "rmi_2d_sensor.h" 10 11enum rmi_f12_object_type { 12 RMI_F12_OBJECT_NONE = 0x00, 13 RMI_F12_OBJECT_FINGER = 0x01, 14 RMI_F12_OBJECT_STYLUS = 0x02, 15 RMI_F12_OBJECT_PALM = 0x03, 16 RMI_F12_OBJECT_UNCLASSIFIED = 0x04, 17 RMI_F12_OBJECT_GLOVED_FINGER = 0x06, 18 RMI_F12_OBJECT_NARROW_OBJECT = 0x07, 19 RMI_F12_OBJECT_HAND_EDGE = 0x08, 20 RMI_F12_OBJECT_COVER = 0x0A, 21 RMI_F12_OBJECT_STYLUS_2 = 0x0B, 22 RMI_F12_OBJECT_ERASER = 0x0C, 23 RMI_F12_OBJECT_SMALL_OBJECT = 0x0D, 24}; 25 26#define F12_DATA1_BYTES_PER_OBJ 8 27 28struct f12_data { 29 struct rmi_2d_sensor sensor; 30 struct rmi_2d_sensor_platform_data sensor_pdata; 31 bool has_dribble; 32 33 u16 data_addr; 34 35 struct rmi_register_descriptor query_reg_desc; 36 struct rmi_register_descriptor control_reg_desc; 37 struct rmi_register_descriptor data_reg_desc; 38 39 /* F12 Data1 describes sensed objects */ 40 const struct rmi_register_desc_item *data1; 41 u16 data1_offset; 42 43 /* F12 Data5 describes finger ACM */ 44 const struct rmi_register_desc_item *data5; 45 u16 data5_offset; 46 47 /* F12 Data5 describes Pen */ 48 const struct rmi_register_desc_item *data6; 49 u16 data6_offset; 50 51 52 /* F12 Data9 reports relative data */ 53 const struct rmi_register_desc_item *data9; 54 u16 data9_offset; 55 56 const struct rmi_register_desc_item *data15; 57 u16 data15_offset; 58 59 unsigned long *abs_mask; 60 unsigned long *rel_mask; 61}; 62 63static int rmi_f12_read_sensor_tuning(struct f12_data *f12) 64{ 65 const struct rmi_register_desc_item *item; 66 struct rmi_2d_sensor *sensor = &f12->sensor; 67 struct rmi_function *fn = sensor->fn; 68 struct rmi_device *rmi_dev = fn->rmi_dev; 69 int ret; 70 int offset; 71 u8 buf[15]; 72 int pitch_x = 0; 73 int pitch_y = 0; 74 int rx_receivers = 0; 75 int tx_receivers = 0; 76 77 item = rmi_get_register_desc_item(&f12->control_reg_desc, 8); 78 if (!item) { 79 dev_err(&fn->dev, 80 "F12 does not have the sensor tuning control register\n"); 81 return -ENODEV; 82 } 83 84 offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8); 85 86 if (item->reg_size > sizeof(buf)) { 87 dev_err(&fn->dev, 88 "F12 control8 should be no bigger than %zd bytes, not: %ld\n", 89 sizeof(buf), item->reg_size); 90 return -ENODEV; 91 } 92 93 ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr + offset, buf, 94 item->reg_size); 95 if (ret) 96 return ret; 97 98 offset = 0; 99 if (rmi_register_desc_has_subpacket(item, 0)) { 100 sensor->max_x = (buf[offset + 1] << 8) | buf[offset]; 101 sensor->max_y = (buf[offset + 3] << 8) | buf[offset + 2]; 102 offset += 4; 103 } 104 105 rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: max_x: %d max_y: %d\n", __func__, 106 sensor->max_x, sensor->max_y); 107 108 if (rmi_register_desc_has_subpacket(item, 1)) { 109 pitch_x = (buf[offset + 1] << 8) | buf[offset]; 110 pitch_y = (buf[offset + 3] << 8) | buf[offset + 2]; 111 offset += 4; 112 } 113 114 if (rmi_register_desc_has_subpacket(item, 2)) { 115 /* Units 1/128 sensor pitch */ 116 rmi_dbg(RMI_DEBUG_FN, &fn->dev, 117 "%s: Inactive Border xlo:%d xhi:%d ylo:%d yhi:%d\n", 118 __func__, 119 buf[offset], buf[offset + 1], 120 buf[offset + 2], buf[offset + 3]); 121 122 offset += 4; 123 } 124 125 if (rmi_register_desc_has_subpacket(item, 3)) { 126 rx_receivers = buf[offset]; 127 tx_receivers = buf[offset + 1]; 128 offset += 2; 129 } 130 131 /* Skip over sensor flags */ 132 if (rmi_register_desc_has_subpacket(item, 4)) 133 offset += 1; 134 135 sensor->x_mm = (pitch_x * rx_receivers) >> 12; 136 sensor->y_mm = (pitch_y * tx_receivers) >> 12; 137 138 rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x_mm: %d y_mm: %d\n", __func__, 139 sensor->x_mm, sensor->y_mm); 140 141 return 0; 142} 143 144static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size) 145{ 146 int i; 147 struct rmi_2d_sensor *sensor = &f12->sensor; 148 int objects = f12->data1->num_subpackets; 149 150 if ((f12->data1->num_subpackets * F12_DATA1_BYTES_PER_OBJ) > size) 151 objects = size / F12_DATA1_BYTES_PER_OBJ; 152 153 for (i = 0; i < objects; i++) { 154 struct rmi_2d_sensor_abs_object *obj = &sensor->objs[i]; 155 156 obj->type = RMI_2D_OBJECT_NONE; 157 obj->mt_tool = MT_TOOL_FINGER; 158 159 switch (data1[0]) { 160 case RMI_F12_OBJECT_FINGER: 161 obj->type = RMI_2D_OBJECT_FINGER; 162 break; 163 case RMI_F12_OBJECT_STYLUS: 164 obj->type = RMI_2D_OBJECT_STYLUS; 165 obj->mt_tool = MT_TOOL_PEN; 166 break; 167 case RMI_F12_OBJECT_PALM: 168 obj->type = RMI_2D_OBJECT_PALM; 169 obj->mt_tool = MT_TOOL_PALM; 170 break; 171 case RMI_F12_OBJECT_UNCLASSIFIED: 172 obj->type = RMI_2D_OBJECT_UNCLASSIFIED; 173 break; 174 } 175 176 obj->x = (data1[2] << 8) | data1[1]; 177 obj->y = (data1[4] << 8) | data1[3]; 178 obj->z = data1[5]; 179 obj->wx = data1[6]; 180 obj->wy = data1[7]; 181 182 rmi_2d_sensor_abs_process(sensor, obj, i); 183 184 data1 += F12_DATA1_BYTES_PER_OBJ; 185 } 186 187 if (sensor->kernel_tracking) 188 input_mt_assign_slots(sensor->input, 189 sensor->tracking_slots, 190 sensor->tracking_pos, 191 sensor->nbr_fingers, 192 sensor->dmax); 193 194 for (i = 0; i < objects; i++) 195 rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i); 196} 197 198static irqreturn_t rmi_f12_attention(int irq, void *ctx) 199{ 200 int retval; 201 struct rmi_function *fn = ctx; 202 struct rmi_device *rmi_dev = fn->rmi_dev; 203 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); 204 struct f12_data *f12 = dev_get_drvdata(&fn->dev); 205 struct rmi_2d_sensor *sensor = &f12->sensor; 206 int valid_bytes = sensor->pkt_size; 207 208 if (drvdata->attn_data.data) { 209 if (sensor->attn_size > drvdata->attn_data.size) 210 valid_bytes = drvdata->attn_data.size; 211 else 212 valid_bytes = sensor->attn_size; 213 memcpy(sensor->data_pkt, drvdata->attn_data.data, 214 valid_bytes); 215 drvdata->attn_data.data += valid_bytes; 216 drvdata->attn_data.size -= valid_bytes; 217 } else { 218 retval = rmi_read_block(rmi_dev, f12->data_addr, 219 sensor->data_pkt, sensor->pkt_size); 220 if (retval < 0) { 221 dev_err(&fn->dev, "Failed to read object data. Code: %d.\n", 222 retval); 223 return IRQ_RETVAL(retval); 224 } 225 } 226 227 if (f12->data1) 228 rmi_f12_process_objects(f12, 229 &sensor->data_pkt[f12->data1_offset], valid_bytes); 230 231 input_mt_sync_frame(sensor->input); 232 233 return IRQ_HANDLED; 234} 235 236static int rmi_f12_write_control_regs(struct rmi_function *fn) 237{ 238 int ret; 239 const struct rmi_register_desc_item *item; 240 struct rmi_device *rmi_dev = fn->rmi_dev; 241 struct f12_data *f12 = dev_get_drvdata(&fn->dev); 242 int control_size; 243 char buf[3]; 244 u16 control_offset = 0; 245 u8 subpacket_offset = 0; 246 247 if (f12->has_dribble 248 && (f12->sensor.dribble != RMI_REG_STATE_DEFAULT)) { 249 item = rmi_get_register_desc_item(&f12->control_reg_desc, 20); 250 if (item) { 251 control_offset = rmi_register_desc_calc_reg_offset( 252 &f12->control_reg_desc, 20); 253 254 /* 255 * The byte containing the EnableDribble bit will be 256 * in either byte 0 or byte 2 of control 20. Depending 257 * on the existence of subpacket 0. If control 20 is 258 * larger then 3 bytes, just read the first 3. 259 */ 260 control_size = min(item->reg_size, 3UL); 261 262 ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr 263 + control_offset, buf, control_size); 264 if (ret) 265 return ret; 266 267 if (rmi_register_desc_has_subpacket(item, 0)) 268 subpacket_offset += 1; 269 270 switch (f12->sensor.dribble) { 271 case RMI_REG_STATE_OFF: 272 buf[subpacket_offset] &= ~BIT(2); 273 break; 274 case RMI_REG_STATE_ON: 275 buf[subpacket_offset] |= BIT(2); 276 break; 277 case RMI_REG_STATE_DEFAULT: 278 default: 279 break; 280 } 281 282 ret = rmi_write_block(rmi_dev, 283 fn->fd.control_base_addr + control_offset, 284 buf, control_size); 285 if (ret) 286 return ret; 287 } 288 } 289 290 return 0; 291 292} 293 294static int rmi_f12_config(struct rmi_function *fn) 295{ 296 struct rmi_driver *drv = fn->rmi_dev->driver; 297 struct f12_data *f12 = dev_get_drvdata(&fn->dev); 298 struct rmi_2d_sensor *sensor; 299 int ret; 300 301 sensor = &f12->sensor; 302 303 if (!sensor->report_abs) 304 drv->clear_irq_bits(fn->rmi_dev, f12->abs_mask); 305 else 306 drv->set_irq_bits(fn->rmi_dev, f12->abs_mask); 307 308 drv->clear_irq_bits(fn->rmi_dev, f12->rel_mask); 309 310 ret = rmi_f12_write_control_regs(fn); 311 if (ret) 312 dev_warn(&fn->dev, 313 "Failed to write F12 control registers: %d\n", ret); 314 315 return 0; 316} 317 318static int rmi_f12_probe(struct rmi_function *fn) 319{ 320 struct f12_data *f12; 321 int ret; 322 struct rmi_device *rmi_dev = fn->rmi_dev; 323 char buf; 324 u16 query_addr = fn->fd.query_base_addr; 325 const struct rmi_register_desc_item *item; 326 struct rmi_2d_sensor *sensor; 327 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev); 328 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); 329 u16 data_offset = 0; 330 int mask_size; 331 332 rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__); 333 334 mask_size = BITS_TO_LONGS(drvdata->irq_count) * sizeof(unsigned long); 335 336 ret = rmi_read(fn->rmi_dev, query_addr, &buf); 337 if (ret < 0) { 338 dev_err(&fn->dev, "Failed to read general info register: %d\n", 339 ret); 340 return -ENODEV; 341 } 342 ++query_addr; 343 344 if (!(buf & BIT(0))) { 345 dev_err(&fn->dev, 346 "Behavior of F12 without register descriptors is undefined.\n"); 347 return -ENODEV; 348 } 349 350 f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data) + mask_size * 2, 351 GFP_KERNEL); 352 if (!f12) 353 return -ENOMEM; 354 355 f12->abs_mask = (unsigned long *)((char *)f12 356 + sizeof(struct f12_data)); 357 f12->rel_mask = (unsigned long *)((char *)f12 358 + sizeof(struct f12_data) + mask_size); 359 360 set_bit(fn->irq_pos, f12->abs_mask); 361 set_bit(fn->irq_pos + 1, f12->rel_mask); 362 363 f12->has_dribble = !!(buf & BIT(3)); 364 365 if (fn->dev.of_node) { 366 ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata); 367 if (ret) 368 return ret; 369 } else { 370 f12->sensor_pdata = pdata->sensor_pdata; 371 } 372 373 ret = rmi_read_register_desc(rmi_dev, query_addr, 374 &f12->query_reg_desc); 375 if (ret) { 376 dev_err(&fn->dev, 377 "Failed to read the Query Register Descriptor: %d\n", 378 ret); 379 return ret; 380 } 381 query_addr += 3; 382 383 ret = rmi_read_register_desc(rmi_dev, query_addr, 384 &f12->control_reg_desc); 385 if (ret) { 386 dev_err(&fn->dev, 387 "Failed to read the Control Register Descriptor: %d\n", 388 ret); 389 return ret; 390 } 391 query_addr += 3; 392 393 ret = rmi_read_register_desc(rmi_dev, query_addr, 394 &f12->data_reg_desc); 395 if (ret) { 396 dev_err(&fn->dev, 397 "Failed to read the Data Register Descriptor: %d\n", 398 ret); 399 return ret; 400 } 401 query_addr += 3; 402 403 sensor = &f12->sensor; 404 sensor->fn = fn; 405 f12->data_addr = fn->fd.data_base_addr; 406 sensor->pkt_size = rmi_register_desc_calc_size(&f12->data_reg_desc); 407 408 sensor->axis_align = 409 f12->sensor_pdata.axis_align; 410 411 sensor->x_mm = f12->sensor_pdata.x_mm; 412 sensor->y_mm = f12->sensor_pdata.y_mm; 413 sensor->dribble = f12->sensor_pdata.dribble; 414 415 if (sensor->sensor_type == rmi_sensor_default) 416 sensor->sensor_type = 417 f12->sensor_pdata.sensor_type; 418 419 rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: data packet size: %d\n", __func__, 420 sensor->pkt_size); 421 sensor->data_pkt = devm_kzalloc(&fn->dev, sensor->pkt_size, GFP_KERNEL); 422 if (!sensor->data_pkt) 423 return -ENOMEM; 424 425 dev_set_drvdata(&fn->dev, f12); 426 427 ret = rmi_f12_read_sensor_tuning(f12); 428 if (ret) 429 return ret; 430 431 /* 432 * Figure out what data is contained in the data registers. HID devices 433 * may have registers defined, but their data is not reported in the 434 * HID attention report. Registers which are not reported in the HID 435 * attention report check to see if the device is receiving data from 436 * HID attention reports. 437 */ 438 item = rmi_get_register_desc_item(&f12->data_reg_desc, 0); 439 if (item && !drvdata->attn_data.data) 440 data_offset += item->reg_size; 441 442 item = rmi_get_register_desc_item(&f12->data_reg_desc, 1); 443 if (item) { 444 f12->data1 = item; 445 f12->data1_offset = data_offset; 446 data_offset += item->reg_size; 447 sensor->nbr_fingers = item->num_subpackets; 448 sensor->report_abs = 1; 449 sensor->attn_size += item->reg_size; 450 } 451 452 item = rmi_get_register_desc_item(&f12->data_reg_desc, 2); 453 if (item && !drvdata->attn_data.data) 454 data_offset += item->reg_size; 455 456 item = rmi_get_register_desc_item(&f12->data_reg_desc, 3); 457 if (item && !drvdata->attn_data.data) 458 data_offset += item->reg_size; 459 460 item = rmi_get_register_desc_item(&f12->data_reg_desc, 4); 461 if (item && !drvdata->attn_data.data) 462 data_offset += item->reg_size; 463 464 item = rmi_get_register_desc_item(&f12->data_reg_desc, 5); 465 if (item) { 466 f12->data5 = item; 467 f12->data5_offset = data_offset; 468 data_offset += item->reg_size; 469 sensor->attn_size += item->reg_size; 470 } 471 472 item = rmi_get_register_desc_item(&f12->data_reg_desc, 6); 473 if (item && !drvdata->attn_data.data) { 474 f12->data6 = item; 475 f12->data6_offset = data_offset; 476 data_offset += item->reg_size; 477 } 478 479 item = rmi_get_register_desc_item(&f12->data_reg_desc, 7); 480 if (item && !drvdata->attn_data.data) 481 data_offset += item->reg_size; 482 483 item = rmi_get_register_desc_item(&f12->data_reg_desc, 8); 484 if (item && !drvdata->attn_data.data) 485 data_offset += item->reg_size; 486 487 item = rmi_get_register_desc_item(&f12->data_reg_desc, 9); 488 if (item && !drvdata->attn_data.data) { 489 f12->data9 = item; 490 f12->data9_offset = data_offset; 491 data_offset += item->reg_size; 492 if (!sensor->report_abs) 493 sensor->report_rel = 1; 494 } 495 496 item = rmi_get_register_desc_item(&f12->data_reg_desc, 10); 497 if (item && !drvdata->attn_data.data) 498 data_offset += item->reg_size; 499 500 item = rmi_get_register_desc_item(&f12->data_reg_desc, 11); 501 if (item && !drvdata->attn_data.data) 502 data_offset += item->reg_size; 503 504 item = rmi_get_register_desc_item(&f12->data_reg_desc, 12); 505 if (item && !drvdata->attn_data.data) 506 data_offset += item->reg_size; 507 508 item = rmi_get_register_desc_item(&f12->data_reg_desc, 13); 509 if (item && !drvdata->attn_data.data) 510 data_offset += item->reg_size; 511 512 item = rmi_get_register_desc_item(&f12->data_reg_desc, 14); 513 if (item && !drvdata->attn_data.data) 514 data_offset += item->reg_size; 515 516 item = rmi_get_register_desc_item(&f12->data_reg_desc, 15); 517 if (item && !drvdata->attn_data.data) { 518 f12->data15 = item; 519 f12->data15_offset = data_offset; 520 data_offset += item->reg_size; 521 } 522 523 /* allocate the in-kernel tracking buffers */ 524 sensor->tracking_pos = devm_kcalloc(&fn->dev, 525 sensor->nbr_fingers, sizeof(struct input_mt_pos), 526 GFP_KERNEL); 527 sensor->tracking_slots = devm_kcalloc(&fn->dev, 528 sensor->nbr_fingers, sizeof(int), GFP_KERNEL); 529 sensor->objs = devm_kcalloc(&fn->dev, 530 sensor->nbr_fingers, 531 sizeof(struct rmi_2d_sensor_abs_object), 532 GFP_KERNEL); 533 if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs) 534 return -ENOMEM; 535 536 ret = rmi_2d_sensor_configure_input(fn, sensor); 537 if (ret) 538 return ret; 539 540 return 0; 541} 542 543struct rmi_function_handler rmi_f12_handler = { 544 .driver = { 545 .name = "rmi4_f12", 546 }, 547 .func = 0x12, 548 .probe = rmi_f12_probe, 549 .config = rmi_f12_config, 550 .attention = rmi_f12_attention, 551}; 552