1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
4 */
5
6#ifndef __SSP_SENSORHUB_H__
7#define __SSP_SENSORHUB_H__
8
9#include <linux/delay.h>
10#include <linux/gpio/consumer.h>
11#include <linux/iio/common/ssp_sensors.h>
12#include <linux/iio/iio.h>
13#include <linux/spi/spi.h>
14
15#define SSP_DEVICE_ID		0x55
16
17#ifdef SSP_DBG
18#define ssp_dbg(format, ...) pr_info("[SSP] "format, ##__VA_ARGS__)
19#else
20#define ssp_dbg(format, ...)
21#endif
22
23#define SSP_SW_RESET_TIME		3000
24/* Sensor polling in ms */
25#define SSP_DEFAULT_POLLING_DELAY	200
26#define SSP_DEFAULT_RETRIES		3
27#define SSP_DATA_PACKET_SIZE		960
28#define SSP_HEADER_BUFFER_SIZE		4
29
30enum {
31	SSP_KERNEL_BINARY = 0,
32	SSP_KERNEL_CRASHED_BINARY,
33};
34
35enum {
36	SSP_INITIALIZATION_STATE = 0,
37	SSP_NO_SENSOR_STATE,
38	SSP_ADD_SENSOR_STATE,
39	SSP_RUNNING_SENSOR_STATE,
40};
41
42/* Firmware download STATE */
43enum {
44	SSP_FW_DL_STATE_FAIL = -1,
45	SSP_FW_DL_STATE_NONE = 0,
46	SSP_FW_DL_STATE_NEED_TO_SCHEDULE,
47	SSP_FW_DL_STATE_SCHEDULED,
48	SSP_FW_DL_STATE_DOWNLOADING,
49	SSP_FW_DL_STATE_SYNC,
50	SSP_FW_DL_STATE_DONE,
51};
52
53#define SSP_INVALID_REVISION			99999
54#define SSP_INVALID_REVISION2			0xffffff
55
56/* AP -> SSP Instruction */
57#define SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD	0xa1
58#define SSP_MSG2SSP_INST_BYPASS_SENSOR_RM	0xa2
59#define SSP_MSG2SSP_INST_REMOVE_ALL		0xa3
60#define SSP_MSG2SSP_INST_CHANGE_DELAY		0xa4
61#define SSP_MSG2SSP_INST_LIBRARY_ADD		0xb1
62#define SSP_MSG2SSP_INST_LIBRARY_REMOVE		0xb2
63#define SSP_MSG2SSP_INST_LIB_NOTI		0xb4
64#define SSP_MSG2SSP_INST_LIB_DATA		0xc1
65
66#define SSP_MSG2SSP_AP_MCU_SET_GYRO_CAL		0xcd
67#define SSP_MSG2SSP_AP_MCU_SET_ACCEL_CAL	0xce
68#define SSP_MSG2SSP_AP_STATUS_SHUTDOWN		0xd0
69#define SSP_MSG2SSP_AP_STATUS_WAKEUP		0xd1
70#define SSP_MSG2SSP_AP_STATUS_SLEEP		0xd2
71#define SSP_MSG2SSP_AP_STATUS_RESUME		0xd3
72#define SSP_MSG2SSP_AP_STATUS_SUSPEND		0xd4
73#define SSP_MSG2SSP_AP_STATUS_RESET		0xd5
74#define SSP_MSG2SSP_AP_STATUS_POW_CONNECTED	0xd6
75#define SSP_MSG2SSP_AP_STATUS_POW_DISCONNECTED	0xd7
76#define SSP_MSG2SSP_AP_TEMPHUMIDITY_CAL_DONE	0xda
77#define SSP_MSG2SSP_AP_MCU_SET_DUMPMODE		0xdb
78#define SSP_MSG2SSP_AP_MCU_DUMP_CHECK		0xdc
79#define SSP_MSG2SSP_AP_MCU_BATCH_FLUSH		0xdd
80#define SSP_MSG2SSP_AP_MCU_BATCH_COUNT		0xdf
81
82#define SSP_MSG2SSP_AP_WHOAMI				0x0f
83#define SSP_MSG2SSP_AP_FIRMWARE_REV			0xf0
84#define SSP_MSG2SSP_AP_SENSOR_FORMATION			0xf1
85#define SSP_MSG2SSP_AP_SENSOR_PROXTHRESHOLD		0xf2
86#define SSP_MSG2SSP_AP_SENSOR_BARCODE_EMUL		0xf3
87#define SSP_MSG2SSP_AP_SENSOR_SCANNING			0xf4
88#define SSP_MSG2SSP_AP_SET_MAGNETIC_HWOFFSET		0xf5
89#define SSP_MSG2SSP_AP_GET_MAGNETIC_HWOFFSET		0xf6
90#define SSP_MSG2SSP_AP_SENSOR_GESTURE_CURRENT		0xf7
91#define SSP_MSG2SSP_AP_GET_THERM			0xf8
92#define SSP_MSG2SSP_AP_GET_BIG_DATA			0xf9
93#define SSP_MSG2SSP_AP_SET_BIG_DATA			0xfa
94#define SSP_MSG2SSP_AP_START_BIG_DATA			0xfb
95#define SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX	0xfd
96#define SSP_MSG2SSP_AP_SENSOR_TILT			0xea
97#define SSP_MSG2SSP_AP_MCU_SET_TIME			0xfe
98#define SSP_MSG2SSP_AP_MCU_GET_TIME			0xff
99
100#define SSP_MSG2SSP_AP_FUSEROM				0x01
101
102/* voice data */
103#define SSP_TYPE_WAKE_UP_VOICE_SERVICE			0x01
104#define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_AM		0x01
105#define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_GRAMMER	0x02
106
107/* Factory Test */
108#define SSP_ACCELEROMETER_FACTORY			0x80
109#define SSP_GYROSCOPE_FACTORY				0x81
110#define SSP_GEOMAGNETIC_FACTORY				0x82
111#define SSP_PRESSURE_FACTORY				0x85
112#define SSP_GESTURE_FACTORY				0x86
113#define SSP_TEMPHUMIDITY_CRC_FACTORY			0x88
114#define SSP_GYROSCOPE_TEMP_FACTORY			0x8a
115#define SSP_GYROSCOPE_DPS_FACTORY			0x8b
116#define SSP_MCU_FACTORY					0x8c
117#define SSP_MCU_SLEEP_FACTORY				0x8d
118
119/* SSP -> AP ACK about write CMD */
120#define SSP_MSG_ACK		0x80	/* ACK from SSP to AP */
121#define SSP_MSG_NAK		0x70	/* NAK from SSP to AP */
122
123struct ssp_sensorhub_info {
124	char *fw_name;
125	char *fw_crashed_name;
126	unsigned int fw_rev;
127	const u8 * const mag_table;
128	const unsigned int mag_length;
129};
130
131/* ssp_msg options bit */
132#define SSP_RW		0
133#define SSP_INDEX	3
134
135#define SSP_AP2HUB_READ		0
136#define SSP_AP2HUB_WRITE	1
137#define SSP_HUB2AP_WRITE	2
138#define SSP_AP2HUB_READY	3
139#define SSP_AP2HUB_RETURN	4
140
141/**
142 * struct ssp_data - ssp platformdata structure
143 * @spi:		spi device
144 * @sensorhub_info:	info about sensorhub board specific features
145 * @wdt_timer:		watchdog timer
146 * @work_wdt:		watchdog work
147 * @work_firmware:	firmware upgrade work queue
148 * @work_refresh:	refresh work queue for reset request from MCU
149 * @shut_down:		shut down flag
150 * @mcu_dump_mode:	mcu dump mode for debug
151 * @time_syncing:	time syncing indication flag
152 * @timestamp:		previous time in ns calculated for time syncing
153 * @check_status:	status table for each sensor
154 * @com_fail_cnt:	communication fail count
155 * @reset_cnt:		reset count
156 * @timeout_cnt:	timeout count
157 * @available_sensors:	available sensors seen by sensorhub (bit array)
158 * @cur_firm_rev:	cached current firmware revision
159 * @last_resume_state:	last AP resume/suspend state used to handle the PM
160 *                      state of ssp
161 * @last_ap_state:	(obsolete) sleep notification for MCU
162 * @sensor_enable:	sensor enable mask
163 * @delay_buf:		data acquisition intervals table
164 * @batch_latency_buf:	yet unknown but existing in communication protocol
165 * @batch_opt_buf:	yet unknown but existing in communication protocol
166 * @accel_position:	yet unknown but existing in communication protocol
167 * @mag_position:	yet unknown but existing in communication protocol
168 * @fw_dl_state:	firmware download state
169 * @comm_lock:		lock protecting the handshake
170 * @pending_lock:	lock protecting pending list and completion
171 * @mcu_reset_gpiod:	mcu reset line
172 * @ap_mcu_gpiod:	ap to mcu gpio line
173 * @mcu_ap_gpiod:	mcu to ap gpio line
174 * @pending_list:	pending list for messages queued to be sent/read
175 * @sensor_devs:	registered IIO devices table
176 * @enable_refcount:	enable reference count for wdt (watchdog timer)
177 * @header_buffer:	cache aligned buffer for packet header
178 */
179struct ssp_data {
180	struct spi_device *spi;
181	const struct ssp_sensorhub_info *sensorhub_info;
182	struct timer_list wdt_timer;
183	struct work_struct work_wdt;
184	struct delayed_work work_refresh;
185
186	bool shut_down;
187	bool mcu_dump_mode;
188	bool time_syncing;
189	int64_t timestamp;
190
191	int check_status[SSP_SENSOR_MAX];
192
193	unsigned int com_fail_cnt;
194	unsigned int reset_cnt;
195	unsigned int timeout_cnt;
196
197	unsigned int available_sensors;
198	unsigned int cur_firm_rev;
199
200	char last_resume_state;
201	char last_ap_state;
202
203	unsigned int sensor_enable;
204	u32 delay_buf[SSP_SENSOR_MAX];
205	s32 batch_latency_buf[SSP_SENSOR_MAX];
206	s8 batch_opt_buf[SSP_SENSOR_MAX];
207
208	int accel_position;
209	int mag_position;
210	int fw_dl_state;
211
212	struct mutex comm_lock;
213	struct mutex pending_lock;
214
215	struct gpio_desc *mcu_reset_gpiod;
216	struct gpio_desc *ap_mcu_gpiod;
217	struct gpio_desc *mcu_ap_gpiod;
218
219	struct list_head pending_list;
220
221	struct iio_dev *sensor_devs[SSP_SENSOR_MAX];
222	atomic_t enable_refcount;
223
224	__le16 header_buffer[SSP_HEADER_BUFFER_SIZE / sizeof(__le16)] __aligned(IIO_DMA_MINALIGN);
225};
226
227void ssp_clean_pending_list(struct ssp_data *data);
228
229int ssp_command(struct ssp_data *data, char command, int arg);
230
231int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type,
232			 u8 *send_buf, u8 length);
233
234int ssp_irq_msg(struct ssp_data *data);
235
236int ssp_get_chipid(struct ssp_data *data);
237
238int ssp_set_magnetic_matrix(struct ssp_data *data);
239
240unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data);
241
242unsigned int ssp_get_firmware_rev(struct ssp_data *data);
243
244int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay);
245
246#endif /* __SSP_SENSORHUB_H__ */
247