1// SPDX-License-Identifier: GPL-2.0 2/* 3 * i2c-ocores.c: I2C bus driver for OpenCores I2C controller 4 * (https://opencores.org/project/i2c/overview) 5 * 6 * Peter Korsgaard <peter@korsgaard.com> 7 * 8 * Support for the GRLIB port of the controller by 9 * Andreas Larsson <andreas@gaisler.com> 10 */ 11 12#include <linux/clk.h> 13#include <linux/delay.h> 14#include <linux/err.h> 15#include <linux/kernel.h> 16#include <linux/module.h> 17#include <linux/errno.h> 18#include <linux/platform_device.h> 19#include <linux/i2c.h> 20#include <linux/interrupt.h> 21#include <linux/wait.h> 22#include <linux/platform_data/i2c-ocores.h> 23#include <linux/slab.h> 24#include <linux/io.h> 25#include <linux/log2.h> 26#include <linux/spinlock.h> 27#include <linux/jiffies.h> 28 29/* 30 * 'process_lock' exists because ocores_process() and ocores_process_timeout() 31 * can't run in parallel. 32 */ 33struct ocores_i2c { 34 void __iomem *base; 35 int iobase; 36 u32 reg_shift; 37 u32 reg_io_width; 38 unsigned long flags; 39 wait_queue_head_t wait; 40 struct i2c_adapter adap; 41 struct i2c_msg *msg; 42 int pos; 43 int nmsgs; 44 int state; /* see STATE_ */ 45 spinlock_t process_lock; 46 struct clk *clk; 47 int ip_clock_khz; 48 int bus_clock_khz; 49 void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value); 50 u8 (*getreg)(struct ocores_i2c *i2c, int reg); 51}; 52 53/* registers */ 54#define OCI2C_PRELOW 0 55#define OCI2C_PREHIGH 1 56#define OCI2C_CONTROL 2 57#define OCI2C_DATA 3 58#define OCI2C_CMD 4 /* write only */ 59#define OCI2C_STATUS 4 /* read only, same address as OCI2C_CMD */ 60 61#define OCI2C_CTRL_IEN 0x40 62#define OCI2C_CTRL_EN 0x80 63 64#define OCI2C_CMD_START 0x91 65#define OCI2C_CMD_STOP 0x41 66#define OCI2C_CMD_READ 0x21 67#define OCI2C_CMD_WRITE 0x11 68#define OCI2C_CMD_READ_ACK 0x21 69#define OCI2C_CMD_READ_NACK 0x29 70#define OCI2C_CMD_IACK 0x01 71 72#define OCI2C_STAT_IF 0x01 73#define OCI2C_STAT_TIP 0x02 74#define OCI2C_STAT_ARBLOST 0x20 75#define OCI2C_STAT_BUSY 0x40 76#define OCI2C_STAT_NACK 0x80 77 78#define STATE_DONE 0 79#define STATE_START 1 80#define STATE_WRITE 2 81#define STATE_READ 3 82#define STATE_ERROR 4 83 84#define TYPE_OCORES 0 85#define TYPE_GRLIB 1 86 87#define OCORES_FLAG_BROKEN_IRQ BIT(1) /* Broken IRQ for FU540-C000 SoC */ 88 89static void oc_setreg_8(struct ocores_i2c *i2c, int reg, u8 value) 90{ 91 iowrite8(value, i2c->base + (reg << i2c->reg_shift)); 92} 93 94static void oc_setreg_16(struct ocores_i2c *i2c, int reg, u8 value) 95{ 96 iowrite16(value, i2c->base + (reg << i2c->reg_shift)); 97} 98 99static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value) 100{ 101 iowrite32(value, i2c->base + (reg << i2c->reg_shift)); 102} 103 104static void oc_setreg_16be(struct ocores_i2c *i2c, int reg, u8 value) 105{ 106 iowrite16be(value, i2c->base + (reg << i2c->reg_shift)); 107} 108 109static void oc_setreg_32be(struct ocores_i2c *i2c, int reg, u8 value) 110{ 111 iowrite32be(value, i2c->base + (reg << i2c->reg_shift)); 112} 113 114static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg) 115{ 116 return ioread8(i2c->base + (reg << i2c->reg_shift)); 117} 118 119static inline u8 oc_getreg_16(struct ocores_i2c *i2c, int reg) 120{ 121 return ioread16(i2c->base + (reg << i2c->reg_shift)); 122} 123 124static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg) 125{ 126 return ioread32(i2c->base + (reg << i2c->reg_shift)); 127} 128 129static inline u8 oc_getreg_16be(struct ocores_i2c *i2c, int reg) 130{ 131 return ioread16be(i2c->base + (reg << i2c->reg_shift)); 132} 133 134static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg) 135{ 136 return ioread32be(i2c->base + (reg << i2c->reg_shift)); 137} 138 139static void oc_setreg_io_8(struct ocores_i2c *i2c, int reg, u8 value) 140{ 141 outb(value, i2c->iobase + reg); 142} 143 144static inline u8 oc_getreg_io_8(struct ocores_i2c *i2c, int reg) 145{ 146 return inb(i2c->iobase + reg); 147} 148 149static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value) 150{ 151 i2c->setreg(i2c, reg, value); 152} 153 154static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg) 155{ 156 return i2c->getreg(i2c, reg); 157} 158 159static void ocores_process(struct ocores_i2c *i2c, u8 stat) 160{ 161 struct i2c_msg *msg = i2c->msg; 162 unsigned long flags; 163 164 /* 165 * If we spin here is because we are in timeout, so we are going 166 * to be in STATE_ERROR. See ocores_process_timeout() 167 */ 168 spin_lock_irqsave(&i2c->process_lock, flags); 169 170 if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) { 171 /* stop has been sent */ 172 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); 173 wake_up(&i2c->wait); 174 goto out; 175 } 176 177 /* error? */ 178 if (stat & OCI2C_STAT_ARBLOST) { 179 i2c->state = STATE_ERROR; 180 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); 181 goto out; 182 } 183 184 if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) { 185 i2c->state = 186 (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE; 187 188 if (stat & OCI2C_STAT_NACK) { 189 i2c->state = STATE_ERROR; 190 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); 191 goto out; 192 } 193 } else { 194 msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA); 195 } 196 197 /* end of msg? */ 198 if (i2c->pos == msg->len) { 199 i2c->nmsgs--; 200 i2c->msg++; 201 i2c->pos = 0; 202 msg = i2c->msg; 203 204 if (i2c->nmsgs) { /* end? */ 205 /* send start? */ 206 if (!(msg->flags & I2C_M_NOSTART)) { 207 u8 addr = i2c_8bit_addr_from_msg(msg); 208 209 i2c->state = STATE_START; 210 211 oc_setreg(i2c, OCI2C_DATA, addr); 212 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); 213 goto out; 214 } 215 i2c->state = (msg->flags & I2C_M_RD) 216 ? STATE_READ : STATE_WRITE; 217 } else { 218 i2c->state = STATE_DONE; 219 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); 220 goto out; 221 } 222 } 223 224 if (i2c->state == STATE_READ) { 225 oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len-1) ? 226 OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK); 227 } else { 228 oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]); 229 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE); 230 } 231 232out: 233 spin_unlock_irqrestore(&i2c->process_lock, flags); 234} 235 236static irqreturn_t ocores_isr(int irq, void *dev_id) 237{ 238 struct ocores_i2c *i2c = dev_id; 239 u8 stat = oc_getreg(i2c, OCI2C_STATUS); 240 241 if (i2c->flags & OCORES_FLAG_BROKEN_IRQ) { 242 if ((stat & OCI2C_STAT_IF) && !(stat & OCI2C_STAT_BUSY)) 243 return IRQ_NONE; 244 } else if (!(stat & OCI2C_STAT_IF)) { 245 return IRQ_NONE; 246 } 247 ocores_process(i2c, stat); 248 249 return IRQ_HANDLED; 250} 251 252/** 253 * ocores_process_timeout() - Process timeout event 254 * @i2c: ocores I2C device instance 255 */ 256static void ocores_process_timeout(struct ocores_i2c *i2c) 257{ 258 unsigned long flags; 259 260 spin_lock_irqsave(&i2c->process_lock, flags); 261 i2c->state = STATE_ERROR; 262 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); 263 spin_unlock_irqrestore(&i2c->process_lock, flags); 264} 265 266/** 267 * ocores_wait() - Wait until something change in a given register 268 * @i2c: ocores I2C device instance 269 * @reg: register to query 270 * @mask: bitmask to apply on register value 271 * @val: expected result 272 * @timeout: timeout in jiffies 273 * 274 * Timeout is necessary to avoid to stay here forever when the chip 275 * does not answer correctly. 276 * 277 * Return: 0 on success, -ETIMEDOUT on timeout 278 */ 279static int ocores_wait(struct ocores_i2c *i2c, 280 int reg, u8 mask, u8 val, 281 const unsigned long timeout) 282{ 283 unsigned long j; 284 285 j = jiffies + timeout; 286 while (1) { 287 u8 status = oc_getreg(i2c, reg); 288 289 if ((status & mask) == val) 290 break; 291 292 if (time_after(jiffies, j)) 293 return -ETIMEDOUT; 294 } 295 return 0; 296} 297 298/** 299 * ocores_poll_wait() - Wait until is possible to process some data 300 * @i2c: ocores I2C device instance 301 * 302 * Used when the device is in polling mode (interrupts disabled). 303 * 304 * Return: 0 on success, -ETIMEDOUT on timeout 305 */ 306static int ocores_poll_wait(struct ocores_i2c *i2c) 307{ 308 u8 mask; 309 int err; 310 311 if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) { 312 /* transfer is over */ 313 mask = OCI2C_STAT_BUSY; 314 } else { 315 /* on going transfer */ 316 mask = OCI2C_STAT_TIP; 317 /* 318 * We wait for the data to be transferred (8bit), 319 * then we start polling on the ACK/NACK bit 320 */ 321 udelay((8 * 1000) / i2c->bus_clock_khz); 322 } 323 324 /* 325 * once we are here we expect to get the expected result immediately 326 * so if after 1ms we timeout then something is broken. 327 */ 328 err = ocores_wait(i2c, OCI2C_STATUS, mask, 0, msecs_to_jiffies(1)); 329 if (err) 330 dev_warn(i2c->adap.dev.parent, 331 "%s: STATUS timeout, bit 0x%x did not clear in 1ms\n", 332 __func__, mask); 333 return err; 334} 335 336/** 337 * ocores_process_polling() - It handles an IRQ-less transfer 338 * @i2c: ocores I2C device instance 339 * 340 * Even if IRQ are disabled, the I2C OpenCore IP behavior is exactly the same 341 * (only that IRQ are not produced). This means that we can re-use entirely 342 * ocores_isr(), we just add our polling code around it. 343 * 344 * It can run in atomic context 345 * 346 * Return: 0 on success, -ETIMEDOUT on timeout 347 */ 348static int ocores_process_polling(struct ocores_i2c *i2c) 349{ 350 irqreturn_t ret; 351 int err = 0; 352 353 while (1) { 354 err = ocores_poll_wait(i2c); 355 if (err) 356 break; /* timeout */ 357 358 ret = ocores_isr(-1, i2c); 359 if (ret == IRQ_NONE) 360 break; /* all messages have been transferred */ 361 else { 362 if (i2c->flags & OCORES_FLAG_BROKEN_IRQ) 363 if (i2c->state == STATE_DONE) 364 break; 365 } 366 } 367 368 return err; 369} 370 371static int ocores_xfer_core(struct ocores_i2c *i2c, 372 struct i2c_msg *msgs, int num, 373 bool polling) 374{ 375 int ret = 0; 376 u8 ctrl; 377 378 ctrl = oc_getreg(i2c, OCI2C_CONTROL); 379 if (polling) 380 oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~OCI2C_CTRL_IEN); 381 else 382 oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN); 383 384 i2c->msg = msgs; 385 i2c->pos = 0; 386 i2c->nmsgs = num; 387 i2c->state = STATE_START; 388 389 oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg)); 390 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); 391 392 if (polling) { 393 ret = ocores_process_polling(i2c); 394 } else { 395 if (wait_event_timeout(i2c->wait, 396 (i2c->state == STATE_ERROR) || 397 (i2c->state == STATE_DONE), HZ) == 0) 398 ret = -ETIMEDOUT; 399 } 400 if (ret) { 401 ocores_process_timeout(i2c); 402 return ret; 403 } 404 405 return (i2c->state == STATE_DONE) ? num : -EIO; 406} 407 408static int ocores_xfer_polling(struct i2c_adapter *adap, 409 struct i2c_msg *msgs, int num) 410{ 411 return ocores_xfer_core(i2c_get_adapdata(adap), msgs, num, true); 412} 413 414static int ocores_xfer(struct i2c_adapter *adap, 415 struct i2c_msg *msgs, int num) 416{ 417 return ocores_xfer_core(i2c_get_adapdata(adap), msgs, num, false); 418} 419 420static int ocores_init(struct device *dev, struct ocores_i2c *i2c) 421{ 422 int prescale; 423 int diff; 424 u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); 425 426 /* make sure the device is disabled */ 427 ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); 428 oc_setreg(i2c, OCI2C_CONTROL, ctrl); 429 430 prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1; 431 prescale = clamp(prescale, 0, 0xffff); 432 433 diff = i2c->ip_clock_khz / (5 * (prescale + 1)) - i2c->bus_clock_khz; 434 if (abs(diff) > i2c->bus_clock_khz / 10) { 435 dev_err(dev, 436 "Unsupported clock settings: core: %d KHz, bus: %d KHz\n", 437 i2c->ip_clock_khz, i2c->bus_clock_khz); 438 return -EINVAL; 439 } 440 441 oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff); 442 oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8); 443 444 /* Init the device */ 445 oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); 446 oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN); 447 448 return 0; 449} 450 451 452static u32 ocores_func(struct i2c_adapter *adap) 453{ 454 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 455} 456 457static struct i2c_algorithm ocores_algorithm = { 458 .master_xfer = ocores_xfer, 459 .master_xfer_atomic = ocores_xfer_polling, 460 .functionality = ocores_func, 461}; 462 463static const struct i2c_adapter ocores_adapter = { 464 .owner = THIS_MODULE, 465 .name = "i2c-ocores", 466 .class = I2C_CLASS_DEPRECATED, 467 .algo = &ocores_algorithm, 468}; 469 470static const struct of_device_id ocores_i2c_match[] = { 471 { 472 .compatible = "opencores,i2c-ocores", 473 .data = (void *)TYPE_OCORES, 474 }, 475 { 476 .compatible = "aeroflexgaisler,i2cmst", 477 .data = (void *)TYPE_GRLIB, 478 }, 479 { 480 .compatible = "sifive,fu540-c000-i2c", 481 }, 482 { 483 .compatible = "sifive,i2c0", 484 }, 485 {}, 486}; 487MODULE_DEVICE_TABLE(of, ocores_i2c_match); 488 489#ifdef CONFIG_OF 490/* 491 * Read and write functions for the GRLIB port of the controller. Registers are 492 * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one 493 * register. The subsequent registers have their offsets decreased accordingly. 494 */ 495static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg) 496{ 497 u32 rd; 498 int rreg = reg; 499 500 if (reg != OCI2C_PRELOW) 501 rreg--; 502 rd = ioread32be(i2c->base + (rreg << i2c->reg_shift)); 503 if (reg == OCI2C_PREHIGH) 504 return (u8)(rd >> 8); 505 else 506 return (u8)rd; 507} 508 509static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value) 510{ 511 u32 curr, wr; 512 int rreg = reg; 513 514 if (reg != OCI2C_PRELOW) 515 rreg--; 516 if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) { 517 curr = ioread32be(i2c->base + (rreg << i2c->reg_shift)); 518 if (reg == OCI2C_PRELOW) 519 wr = (curr & 0xff00) | value; 520 else 521 wr = (((u32)value) << 8) | (curr & 0xff); 522 } else { 523 wr = value; 524 } 525 iowrite32be(wr, i2c->base + (rreg << i2c->reg_shift)); 526} 527 528static int ocores_i2c_of_probe(struct platform_device *pdev, 529 struct ocores_i2c *i2c) 530{ 531 struct device_node *np = pdev->dev.of_node; 532 const struct of_device_id *match; 533 u32 val; 534 u32 clock_frequency; 535 bool clock_frequency_present; 536 537 if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) { 538 /* no 'reg-shift', check for deprecated 'regstep' */ 539 if (!of_property_read_u32(np, "regstep", &val)) { 540 if (!is_power_of_2(val)) { 541 dev_err(&pdev->dev, "invalid regstep %d\n", 542 val); 543 return -EINVAL; 544 } 545 i2c->reg_shift = ilog2(val); 546 dev_warn(&pdev->dev, 547 "regstep property deprecated, use reg-shift\n"); 548 } 549 } 550 551 clock_frequency_present = !of_property_read_u32(np, "clock-frequency", 552 &clock_frequency); 553 i2c->bus_clock_khz = 100; 554 555 i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL); 556 if (IS_ERR(i2c->clk)) 557 return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk), 558 "devm_clk_get_optional_enabled failed\n"); 559 560 i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000; 561 if (clock_frequency_present) 562 i2c->bus_clock_khz = clock_frequency / 1000; 563 if (i2c->ip_clock_khz == 0) { 564 if (of_property_read_u32(np, "opencores,ip-clock-frequency", 565 &val)) { 566 if (!clock_frequency_present) { 567 dev_err(&pdev->dev, 568 "Missing required parameter 'opencores,ip-clock-frequency'\n"); 569 return -ENODEV; 570 } 571 i2c->ip_clock_khz = clock_frequency / 1000; 572 dev_warn(&pdev->dev, 573 "Deprecated usage of the 'clock-frequency' property, please update to 'opencores,ip-clock-frequency'\n"); 574 } else { 575 i2c->ip_clock_khz = val / 1000; 576 if (clock_frequency_present) 577 i2c->bus_clock_khz = clock_frequency / 1000; 578 } 579 } 580 581 of_property_read_u32(pdev->dev.of_node, "reg-io-width", 582 &i2c->reg_io_width); 583 584 match = of_match_node(ocores_i2c_match, pdev->dev.of_node); 585 if (match && (long)match->data == TYPE_GRLIB) { 586 dev_dbg(&pdev->dev, "GRLIB variant of i2c-ocores\n"); 587 i2c->setreg = oc_setreg_grlib; 588 i2c->getreg = oc_getreg_grlib; 589 } 590 591 return 0; 592} 593#else 594#define ocores_i2c_of_probe(pdev, i2c) -ENODEV 595#endif 596 597static int ocores_i2c_probe(struct platform_device *pdev) 598{ 599 struct ocores_i2c *i2c; 600 struct ocores_i2c_platform_data *pdata; 601 struct resource *res; 602 int irq; 603 int ret; 604 int i; 605 606 i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); 607 if (!i2c) 608 return -ENOMEM; 609 610 spin_lock_init(&i2c->process_lock); 611 612 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 613 if (res) { 614 i2c->base = devm_ioremap_resource(&pdev->dev, res); 615 if (IS_ERR(i2c->base)) 616 return PTR_ERR(i2c->base); 617 } else { 618 res = platform_get_resource(pdev, IORESOURCE_IO, 0); 619 if (!res) 620 return -EINVAL; 621 i2c->iobase = res->start; 622 if (!devm_request_region(&pdev->dev, res->start, 623 resource_size(res), 624 pdev->name)) { 625 dev_err(&pdev->dev, "Can't get I/O resource.\n"); 626 return -EBUSY; 627 } 628 i2c->setreg = oc_setreg_io_8; 629 i2c->getreg = oc_getreg_io_8; 630 } 631 632 pdata = dev_get_platdata(&pdev->dev); 633 if (pdata) { 634 i2c->reg_shift = pdata->reg_shift; 635 i2c->reg_io_width = pdata->reg_io_width; 636 i2c->ip_clock_khz = pdata->clock_khz; 637 if (pdata->bus_khz) 638 i2c->bus_clock_khz = pdata->bus_khz; 639 else 640 i2c->bus_clock_khz = 100; 641 } else { 642 ret = ocores_i2c_of_probe(pdev, i2c); 643 if (ret) 644 return ret; 645 } 646 647 if (i2c->reg_io_width == 0) 648 i2c->reg_io_width = 1; /* Set to default value */ 649 650 if (!i2c->setreg || !i2c->getreg) { 651 bool be = pdata ? pdata->big_endian : 652 of_device_is_big_endian(pdev->dev.of_node); 653 654 switch (i2c->reg_io_width) { 655 case 1: 656 i2c->setreg = oc_setreg_8; 657 i2c->getreg = oc_getreg_8; 658 break; 659 660 case 2: 661 i2c->setreg = be ? oc_setreg_16be : oc_setreg_16; 662 i2c->getreg = be ? oc_getreg_16be : oc_getreg_16; 663 break; 664 665 case 4: 666 i2c->setreg = be ? oc_setreg_32be : oc_setreg_32; 667 i2c->getreg = be ? oc_getreg_32be : oc_getreg_32; 668 break; 669 670 default: 671 dev_err(&pdev->dev, "Unsupported I/O width (%d)\n", 672 i2c->reg_io_width); 673 return -EINVAL; 674 } 675 } 676 677 init_waitqueue_head(&i2c->wait); 678 679 irq = platform_get_irq_optional(pdev, 0); 680 /* 681 * Since the SoC does have an interrupt, its DT has an interrupt 682 * property - But this should be bypassed as the IRQ logic in this 683 * SoC is broken. 684 */ 685 if (of_device_is_compatible(pdev->dev.of_node, 686 "sifive,fu540-c000-i2c")) { 687 i2c->flags |= OCORES_FLAG_BROKEN_IRQ; 688 irq = -ENXIO; 689 } 690 691 if (irq == -ENXIO) { 692 ocores_algorithm.master_xfer = ocores_xfer_polling; 693 } else { 694 if (irq < 0) 695 return irq; 696 } 697 698 if (ocores_algorithm.master_xfer != ocores_xfer_polling) { 699 ret = devm_request_any_context_irq(&pdev->dev, irq, 700 ocores_isr, 0, 701 pdev->name, i2c); 702 if (ret) { 703 dev_err(&pdev->dev, "Cannot claim IRQ\n"); 704 return ret; 705 } 706 } 707 708 ret = ocores_init(&pdev->dev, i2c); 709 if (ret) 710 return ret; 711 712 /* hook up driver to tree */ 713 platform_set_drvdata(pdev, i2c); 714 i2c->adap = ocores_adapter; 715 i2c_set_adapdata(&i2c->adap, i2c); 716 i2c->adap.dev.parent = &pdev->dev; 717 i2c->adap.dev.of_node = pdev->dev.of_node; 718 719 /* add i2c adapter to i2c tree */ 720 ret = i2c_add_adapter(&i2c->adap); 721 if (ret) 722 return ret; 723 724 /* add in known devices to the bus */ 725 if (pdata) { 726 for (i = 0; i < pdata->num_devices; i++) 727 i2c_new_client_device(&i2c->adap, pdata->devices + i); 728 } 729 730 return 0; 731} 732 733static void ocores_i2c_remove(struct platform_device *pdev) 734{ 735 struct ocores_i2c *i2c = platform_get_drvdata(pdev); 736 u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); 737 738 /* disable i2c logic */ 739 ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); 740 oc_setreg(i2c, OCI2C_CONTROL, ctrl); 741 742 /* remove adapter & data */ 743 i2c_del_adapter(&i2c->adap); 744} 745 746static int ocores_i2c_suspend(struct device *dev) 747{ 748 struct ocores_i2c *i2c = dev_get_drvdata(dev); 749 u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); 750 751 /* make sure the device is disabled */ 752 ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); 753 oc_setreg(i2c, OCI2C_CONTROL, ctrl); 754 755 clk_disable_unprepare(i2c->clk); 756 return 0; 757} 758 759static int ocores_i2c_resume(struct device *dev) 760{ 761 struct ocores_i2c *i2c = dev_get_drvdata(dev); 762 unsigned long rate; 763 int ret; 764 765 ret = clk_prepare_enable(i2c->clk); 766 if (ret) 767 return dev_err_probe(dev, ret, "clk_prepare_enable failed\n"); 768 rate = clk_get_rate(i2c->clk) / 1000; 769 if (rate) 770 i2c->ip_clock_khz = rate; 771 return ocores_init(dev, i2c); 772} 773 774static DEFINE_NOIRQ_DEV_PM_OPS(ocores_i2c_pm, 775 ocores_i2c_suspend, ocores_i2c_resume); 776 777static struct platform_driver ocores_i2c_driver = { 778 .probe = ocores_i2c_probe, 779 .remove_new = ocores_i2c_remove, 780 .driver = { 781 .name = "ocores-i2c", 782 .of_match_table = ocores_i2c_match, 783 .pm = pm_sleep_ptr(&ocores_i2c_pm), 784 }, 785}; 786 787module_platform_driver(ocores_i2c_driver); 788 789MODULE_AUTHOR("Peter Korsgaard <peter@korsgaard.com>"); 790MODULE_DESCRIPTION("OpenCores I2C bus driver"); 791MODULE_LICENSE("GPL"); 792MODULE_ALIAS("platform:ocores-i2c"); 793