1# SPDX-License-Identifier: GPL-2.0-only
2#
3# PMBus chip drivers configuration
4#
5
6menuconfig PMBUS
7	tristate "PMBus support"
8	depends on I2C
9	help
10	  Say yes here if you want to enable PMBus support.
11
12	  This driver can also be built as a module. If so, the module will
13	  be called pmbus_core.
14
15if PMBUS
16
17config SENSORS_PMBUS
18	tristate "Generic PMBus devices"
19	default y
20	help
21	  If you say yes here you get hardware monitoring support for generic
22	  PMBus devices, including but not limited to ADP4000, BMR310, BMR453,
23	  BMR454, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, BMR492,
24	  MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012,
25	  TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020.
26
27	  This driver can also be built as a module. If so, the module will
28	  be called pmbus.
29
30config SENSORS_ACBEL_FSG032
31	tristate "ACBEL FSG032 Power Supply"
32	help
33	  If you say yes here you get hardware monitoring support for the ACBEL
34	  FSG032 Power Supply.
35
36	  This driver can also be built as a module. If so, the module will
37	  be called acbel-fsg032.
38
39config SENSORS_ADM1266
40	tristate "Analog Devices ADM1266 Sequencer"
41	select CRC8
42	depends on GPIOLIB
43	help
44	  If you say yes here you get hardware monitoring support for Analog
45	  Devices ADM1266 Cascadable Super Sequencer.
46
47	  This driver can also be built as a module. If so, the module will
48	  be called adm1266.
49
50config SENSORS_ADM1275
51	tristate "Analog Devices ADM1275 and compatibles"
52	help
53	  If you say yes here you get hardware monitoring support for Analog
54	  Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
55	  and ADM1294 Hot-Swap Controller and Digital Power Monitors.
56
57	  This driver can also be built as a module. If so, the module will
58	  be called adm1275.
59
60config SENSORS_BEL_PFE
61	tristate "Bel PFE Compatible Power Supplies"
62	help
63	  If you say yes here you get hardware monitoring support for BEL
64	  PFE1100 and PFE3000 Power Supplies.
65
66	  This driver can also be built as a module. If so, the module will
67	  be called bel-pfe.
68
69config SENSORS_BPA_RS600
70	tristate "BluTek BPA-RS600 Power Supplies"
71	help
72	  If you say yes here you get hardware monitoring support for BluTek
73	  BPA-RS600 Power Supplies.
74
75	  This driver can also be built as a module. If so, the module will
76	  be called bpa-rs600.
77
78config SENSORS_DELTA_AHE50DC_FAN
79	tristate "Delta AHE-50DC fan control module"
80	help
81	  If you say yes here you get hardware monitoring support for
82	  the integrated fan control module of the Delta AHE-50DC
83	  Open19 power shelf.
84
85	  This driver can also be built as a module. If so, the module
86	  will be called delta-ahe50dc-fan.
87
88config SENSORS_FSP_3Y
89	tristate "FSP/3Y-Power power supplies"
90	help
91	  If you say yes here you get hardware monitoring support for
92	  FSP/3Y-Power hot-swap power supplies.
93	  Supported models: YH-5151E, YM-2151E
94
95	  This driver can also be built as a module. If so, the module will
96	  be called fsp-3y.
97
98config SENSORS_IBM_CFFPS
99	tristate "IBM Common Form Factor Power Supply"
100	depends on LEDS_CLASS
101	help
102	  If you say yes here you get hardware monitoring support for the IBM
103	  Common Form Factor power supply.
104
105	  This driver can also be built as a module. If so, the module will
106	  be called ibm-cffps.
107
108config SENSORS_DPS920AB
109	tristate "Delta DPS920AB Power Supply"
110	help
111	  If you say yes here you get hardware monitoring support for Delta
112	  DPS920AB Power Supplies.
113
114	  This driver can also be built as a module. If so, the module will
115	  be called dps920ab.
116
117config SENSORS_INSPUR_IPSPS
118	tristate "INSPUR Power System Power Supply"
119	help
120	  If you say yes here you get hardware monitoring support for the INSPUR
121	  Power System power supply.
122
123	  This driver can also be built as a module. If so, the module will
124	  be called inspur-ipsps.
125
126config SENSORS_IR35221
127	tristate "Infineon IR35221"
128	help
129	  If you say yes here you get hardware monitoring support for the
130	  Infineon IR35221 controller.
131
132	  This driver can also be built as a module. If so, the module will
133	  be called ir35221.
134
135config SENSORS_IR36021
136	tristate "Infineon IR36021"
137	help
138	  If you say yes here you get hardware monitoring support for Infineon
139	  IR36021.
140
141	  This driver can also be built as a module. If so, the module will
142	  be called ir36021.
143
144config SENSORS_IR38064
145	tristate "Infineon IR38064 and compatibles"
146	help
147	  If you say yes here you get hardware monitoring support for Infineon
148	  IR38060, IR38064, IR38164 and IR38263.
149
150	  This driver can also be built as a module. If so, the module will
151	  be called ir38064.
152
153config SENSORS_IR38064_REGULATOR
154	bool "Regulator support for IR38064 and compatibles"
155	depends on SENSORS_IR38064 && REGULATOR
156	help
157	  Uses the IR38064 or compatible as regulator.
158
159config SENSORS_IRPS5401
160	tristate "Infineon IRPS5401"
161	help
162	  If you say yes here you get hardware monitoring support for the
163	  Infineon IRPS5401 controller.
164
165	  This driver can also be built as a module. If so, the module will
166	  be called irps5401.
167
168config SENSORS_ISL68137
169	tristate "Renesas Digital Multiphase Voltage Regulators"
170	help
171	  If you say yes here you get hardware monitoring support for Renesas
172	  digital multiphase voltage regulators.
173
174	  This driver can also be built as a module. If so, the module will
175	  be called isl68137.
176
177config SENSORS_LM25066
178	tristate "National Semiconductor LM25066 and compatibles"
179	help
180	  If you say yes here you get hardware monitoring support for National
181	  Semiconductor LM25056, LM25066, LM5064, and LM5066.
182
183	  This driver can also be built as a module. If so, the module will
184	  be called lm25066.
185
186config SENSORS_LM25066_REGULATOR
187	bool "Regulator support for LM25066 and compatibles"
188	depends on SENSORS_LM25066 && REGULATOR
189	help
190	  If you say yes here you get regulator support for National
191	  Semiconductor LM25066, LM5064, and LM5066.
192
193config SENSORS_LT7182S
194	tristate "Analog Devices LT7182S"
195	help
196	  If you say yes here you get hardware monitoring support for Analog
197	  Devices LT7182S.
198
199	  This driver can also be built as a module. If so, the module will
200	  be called lt7182s.
201
202config SENSORS_LTC2978
203	tristate "Linear Technologies LTC2978 and compatibles"
204	help
205	  If you say yes here you get hardware monitoring support for Linear
206	  Technology LTC2972, LTC2974, LTC2975, LTC2977, LTC2978, LTC2979,
207	  LTC2980, and LTM2987.
208
209	  This driver can also be built as a module. If so, the module will
210	  be called ltc2978.
211
212config SENSORS_LTC2978_REGULATOR
213	bool "Regulator support for LTC2978 and compatibles"
214	depends on SENSORS_LTC2978 && REGULATOR
215	help
216	  If you say yes here you get regulator support for Linear Technology
217	  LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889, LTC7880,
218	  LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680, LTM4686,
219	  and LTM4700.
220
221config SENSORS_LTC3815
222	tristate "Linear Technologies LTC3815"
223	help
224	  If you say yes here you get hardware monitoring support for Linear
225	  Technology LTC3815.
226
227	  This driver can also be built as a module. If so, the module will
228	  be called ltc3815.
229
230config SENSORS_LTC4286
231	bool "Analog Devices LTC4286"
232	help
233	  LTC4286 is an integrated solution for hot swap applications that
234	  allows a board to be safely inserted and removed from a live
235	  backplane.
236	  This chip could be used to monitor voltage, current, ...etc.
237	  If you say yes here you get hardware monitoring support for Analog
238	  Devices LTC4286.
239
240config SENSORS_MAX15301
241	tristate "Maxim MAX15301"
242	help
243	  If you say yes here you get hardware monitoring support for Maxim
244	  MAX15301, as well as for Flex BMR461.
245
246	  This driver can also be built as a module. If so, the module will
247	  be called max15301.
248
249config SENSORS_MAX16064
250	tristate "Maxim MAX16064"
251	help
252	  If you say yes here you get hardware monitoring support for Maxim
253	  MAX16064.
254
255	  This driver can also be built as a module. If so, the module will
256	  be called max16064.
257
258config SENSORS_MAX16601
259	tristate "Maxim MAX16508, MAX16600, MAX16601, and MAX16602"
260	help
261	  If you say yes here you get hardware monitoring support for Maxim
262	  MAX16508, MAX16600, MAX16601, and MAX16602.
263
264	  This driver can also be built as a module. If so, the module will
265	  be called max16601.
266
267config SENSORS_MAX20730
268	tristate "Maxim MAX20710, MAX20730, MAX20734, MAX20743"
269	help
270	  If you say yes here you get hardware monitoring support for Maxim
271	  MAX20710, MAX20730, MAX20734, and MAX20743.
272
273	  This driver can also be built as a module. If so, the module will
274	  be called max20730.
275
276config SENSORS_MAX20751
277	tristate "Maxim MAX20751"
278	help
279	  If you say yes here you get hardware monitoring support for Maxim
280	  MAX20751.
281
282	  This driver can also be built as a module. If so, the module will
283	  be called max20751.
284
285config SENSORS_MAX31785
286	tristate "Maxim MAX31785 and compatibles"
287	help
288	  If you say yes here you get hardware monitoring support for Maxim
289	  MAX31785.
290
291	  This driver can also be built as a module. If so, the module will
292	  be called max31785.
293
294config SENSORS_MAX34440
295	tristate "Maxim MAX34440 and compatibles"
296	help
297	  If you say yes here you get hardware monitoring support for Maxim
298	  MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
299
300	  This driver can also be built as a module. If so, the module will
301	  be called max34440.
302
303config SENSORS_MAX8688
304	tristate "Maxim MAX8688"
305	help
306	  If you say yes here you get hardware monitoring support for Maxim
307	  MAX8688.
308
309	  This driver can also be built as a module. If so, the module will
310	  be called max8688.
311
312config SENSORS_MP2856
313	tristate "MPS MP2856"
314	help
315	  If you say yes here you get hardware monitoring support for MPS
316	  MP2856 MP2857 Dual Loop Digital Multi-Phase Controller.
317
318	  This driver can also be built as a module. If so, the module will
319	  be called mp2856.
320
321config SENSORS_MP2888
322	tristate "MPS MP2888"
323	help
324	  If you say yes here you get hardware monitoring support for MPS
325	  MP2888 Digital, Multi-Phase, Pulse-Width Modulation Controller.
326
327	  This driver can also be built as a module. If so, the module will
328	  be called mp2888.
329
330config SENSORS_MP2975
331	tristate "MPS MP2975"
332	help
333	  If you say yes here you get hardware monitoring support for MPS
334	  MP2975 Dual Loop Digital Multi-Phase Controller.
335
336	  This driver can also be built as a module. If so, the module will
337	  be called mp2975.
338
339config SENSORS_MP2975_REGULATOR
340	depends on SENSORS_MP2975 && REGULATOR
341	bool "Regulator support for MPS MP2975"
342	help
343	  If you say yes here you get regulator support for MPS MP2975
344	  Dual Loop Digital Multi-Phase Controller.
345
346config SENSORS_MP5023
347	tristate "MPS MP5023"
348	help
349	  If you say yes here you get hardware monitoring support for MPS
350	  MP5023.
351
352	  This driver can also be built as a module. If so, the module will
353	  be called mp5023.
354
355config SENSORS_MP5990
356	tristate "MPS MP5990"
357	help
358	  If you say yes here you get hardware monitoring support for MPS
359	  MP5990.
360
361	  This driver can also be built as a module. If so, the module will
362	  be called mp5990.
363
364config SENSORS_MPQ7932_REGULATOR
365	bool "Regulator support for MPQ7932"
366	depends on SENSORS_MPQ7932 && REGULATOR
367	help
368	  If you say yes here you get six integrated buck converter regulator
369	  support for power management IC MPS MPQ7932.
370
371config SENSORS_MPQ7932
372	tristate "MPS MPQ7932"
373	help
374	  If you say yes here you get hardware monitoring functionality support
375	  for power management IC MPS MPQ7932.
376
377	  This driver can also be built as a module. If so, the module will
378	  be called mpq7932.
379
380config SENSORS_MPQ8785
381	tristate "MPS MPQ8785"
382	help
383	  If you say yes here you get hardware monitoring functionality support
384	  for power management IC MPS MPQ8785.
385
386	  This driver can also be built as a module. If so, the module will
387	  be called mpq8785.
388
389config SENSORS_PIM4328
390	tristate "Flex PIM4328 and compatibles"
391	help
392	  If you say yes here you get hardware monitoring support for Flex
393	  PIM4328, PIM4820 and PIM4006 Power Interface Modules.
394
395	  This driver can also be built as a module. If so, the module will
396	  be called pim4328.
397
398config SENSORS_PLI1209BC
399	tristate "Vicor PLI1209BC"
400	help
401	  If you say yes here you get hardware monitoring support for Vicor
402	  PLI1209BC Digital Supervisor.
403
404	  This driver can also be built as a module. If so, the module will
405	  be called pli1209bc.
406
407config SENSORS_PLI1209BC_REGULATOR
408	bool "Regulator support for PLI1209BC"
409	depends on SENSORS_PLI1209BC && REGULATOR
410	help
411	  If you say yes here you get regulator support for Vicor PLI1209BC
412	  Digital Supervisor.
413
414config SENSORS_PM6764TR
415	tristate "ST PM6764TR"
416	help
417	  If you say yes here you get hardware monitoring support for ST
418	  PM6764TR.
419
420	  This driver can also be built as a module. If so, the module will
421	  be called pm6764tr.
422
423config SENSORS_PXE1610
424	tristate "Infineon PXE1610"
425	help
426	  If you say yes here you get hardware monitoring support for Infineon
427	  PXE1610.
428
429	  This driver can also be built as a module. If so, the module will
430	  be called pxe1610.
431
432config SENSORS_Q54SJ108A2
433	tristate "Delta Power Supplies Q54SJ108A2"
434	help
435	  If you say yes here you get hardware monitoring support for Delta
436	  Q54SJ108A2 series Power Supplies.
437
438	  This driver can also be built as a module. If so, the module will
439	  be called q54sj108a2.
440
441config SENSORS_STPDDC60
442	tristate "ST STPDDC60"
443	help
444	  If you say yes here you get hardware monitoring support for ST
445	  STPDDC60 Universal Digital Multicell Controller, as well as for
446	  Flex BMR481.
447
448	  This driver can also be built as a module. If so, the module will
449	  be called stpddc60.
450
451config SENSORS_TDA38640
452	tristate "Infineon TDA38640"
453	help
454	  If you say yes here you get hardware monitoring support for Infineon
455	  TDA38640.
456
457	  This driver can also be built as a module. If so, the module will
458	  be called tda38640.
459
460config SENSORS_TDA38640_REGULATOR
461	bool "Regulator support for TDA38640 and compatibles"
462	depends on SENSORS_TDA38640 && REGULATOR
463	help
464	  If you say yes here you get regulator support for Infineon
465	  TDA38640 as regulator.
466
467config SENSORS_TPS40422
468	tristate "TI TPS40422"
469	help
470	  If you say yes here you get hardware monitoring support for TI
471	  TPS40422.
472
473	  This driver can also be built as a module. If so, the module will
474	  be called tps40422.
475
476config SENSORS_TPS53679
477	tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688"
478	help
479	  If you say yes here you get hardware monitoring support for TI
480	  TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688.
481
482	  This driver can also be built as a module. If so, the module will
483	  be called tps53679.
484
485config SENSORS_TPS546D24
486	tristate "TPS546D24"
487	help
488	  If you say yes here you get hardware monitoring support for TEXAS
489	  TPS546D24.
490
491	  This driver can also be built as a module. If so, the module will
492	  be called tps546d24
493
494config SENSORS_UCD9000
495	tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910"
496	help
497	  If you say yes here you get hardware monitoring support for TI
498	  UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer
499	  and System Health Controllers.
500
501	  This driver can also be built as a module. If so, the module will
502	  be called ucd9000.
503
504config SENSORS_UCD9200
505	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
506	help
507	  If you say yes here you get hardware monitoring support for TI
508	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
509	  Digital PWM System Controllers.
510
511	  This driver can also be built as a module. If so, the module will
512	  be called ucd9200.
513
514config SENSORS_XDPE152
515	tristate "Infineon XDPE152 family"
516	help
517	  If you say yes here you get hardware monitoring support for Infineon
518	  XDPE15284, XDPE152C4, device.
519
520	  This driver can also be built as a module. If so, the module will
521	  be called xdpe152c4.
522
523config SENSORS_XDPE122
524	tristate "Infineon XDPE122 family"
525	help
526	  If you say yes here you get hardware monitoring support for Infineon
527	  XDPE12254, XDPE12284, device.
528
529	  This driver can also be built as a module. If so, the module will
530	  be called xdpe12284.
531
532config SENSORS_XDPE122_REGULATOR
533	bool "Regulator support for XDPE122 and compatibles"
534	depends on SENSORS_XDPE122 && REGULATOR
535	help
536	  Uses the xdpe12284 or compatible as regulator.
537
538config SENSORS_ZL6100
539	tristate "Intersil ZL6100 and compatibles"
540	help
541	  If you say yes here you get hardware monitoring support for Intersil
542	  ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
543	  ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for
544	  Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464.
545
546	  This driver can also be built as a module. If so, the module will
547	  be called zl6100.
548
549endif # PMBUS
550