1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * DRM driver for Pervasive Displays RePaper branded e-ink panels 4 * 5 * Copyright 2013-2017 Pervasive Displays, Inc. 6 * Copyright 2017 Noralf Tr��nnes 7 * 8 * The driver supports: 9 * Material Film: Aurora Mb (V231) 10 * Driver IC: G2 (eTC) 11 * 12 * The controller code was taken from the userspace driver: 13 * https://github.com/repaper/gratis 14 */ 15 16#include <linux/delay.h> 17#include <linux/gpio/consumer.h> 18#include <linux/module.h> 19#include <linux/property.h> 20#include <linux/sched/clock.h> 21#include <linux/spi/spi.h> 22#include <linux/thermal.h> 23 24#include <drm/drm_atomic_helper.h> 25#include <drm/drm_connector.h> 26#include <drm/drm_damage_helper.h> 27#include <drm/drm_drv.h> 28#include <drm/drm_fb_dma_helper.h> 29#include <drm/drm_fbdev_generic.h> 30#include <drm/drm_format_helper.h> 31#include <drm/drm_framebuffer.h> 32#include <drm/drm_gem_atomic_helper.h> 33#include <drm/drm_gem_dma_helper.h> 34#include <drm/drm_gem_framebuffer_helper.h> 35#include <drm/drm_managed.h> 36#include <drm/drm_modes.h> 37#include <drm/drm_rect.h> 38#include <drm/drm_probe_helper.h> 39#include <drm/drm_simple_kms_helper.h> 40 41#define REPAPER_RID_G2_COG_ID 0x12 42 43enum repaper_model { 44 /* 0 is reserved to avoid clashing with NULL */ 45 E1144CS021 = 1, 46 E1190CS021, 47 E2200CS021, 48 E2271CS021, 49}; 50 51enum repaper_stage { /* Image pixel -> Display pixel */ 52 REPAPER_COMPENSATE, /* B -> W, W -> B (Current Image) */ 53 REPAPER_WHITE, /* B -> N, W -> W (Current Image) */ 54 REPAPER_INVERSE, /* B -> N, W -> B (New Image) */ 55 REPAPER_NORMAL /* B -> B, W -> W (New Image) */ 56}; 57 58enum repaper_epd_border_byte { 59 REPAPER_BORDER_BYTE_NONE, 60 REPAPER_BORDER_BYTE_ZERO, 61 REPAPER_BORDER_BYTE_SET, 62}; 63 64struct repaper_epd { 65 struct drm_device drm; 66 struct drm_simple_display_pipe pipe; 67 const struct drm_display_mode *mode; 68 struct drm_connector connector; 69 struct spi_device *spi; 70 71 struct gpio_desc *panel_on; 72 struct gpio_desc *border; 73 struct gpio_desc *discharge; 74 struct gpio_desc *reset; 75 struct gpio_desc *busy; 76 77 struct thermal_zone_device *thermal; 78 79 unsigned int height; 80 unsigned int width; 81 unsigned int bytes_per_scan; 82 const u8 *channel_select; 83 unsigned int stage_time; 84 unsigned int factored_stage_time; 85 bool middle_scan; 86 bool pre_border_byte; 87 enum repaper_epd_border_byte border_byte; 88 89 u8 *line_buffer; 90 void *current_frame; 91 92 bool cleared; 93 bool partial; 94}; 95 96static inline struct repaper_epd *drm_to_epd(struct drm_device *drm) 97{ 98 return container_of(drm, struct repaper_epd, drm); 99} 100 101static int repaper_spi_transfer(struct spi_device *spi, u8 header, 102 const void *tx, void *rx, size_t len) 103{ 104 void *txbuf = NULL, *rxbuf = NULL; 105 struct spi_transfer tr[2] = {}; 106 u8 *headerbuf; 107 int ret; 108 109 headerbuf = kmalloc(1, GFP_KERNEL); 110 if (!headerbuf) 111 return -ENOMEM; 112 113 headerbuf[0] = header; 114 tr[0].tx_buf = headerbuf; 115 tr[0].len = 1; 116 117 /* Stack allocated tx? */ 118 if (tx && len <= 32) { 119 txbuf = kmemdup(tx, len, GFP_KERNEL); 120 if (!txbuf) { 121 ret = -ENOMEM; 122 goto out_free; 123 } 124 } 125 126 if (rx) { 127 rxbuf = kmalloc(len, GFP_KERNEL); 128 if (!rxbuf) { 129 ret = -ENOMEM; 130 goto out_free; 131 } 132 } 133 134 tr[1].tx_buf = txbuf ? txbuf : tx; 135 tr[1].rx_buf = rxbuf; 136 tr[1].len = len; 137 138 ndelay(80); 139 ret = spi_sync_transfer(spi, tr, 2); 140 if (rx && !ret) 141 memcpy(rx, rxbuf, len); 142 143out_free: 144 kfree(headerbuf); 145 kfree(txbuf); 146 kfree(rxbuf); 147 148 return ret; 149} 150 151static int repaper_write_buf(struct spi_device *spi, u8 reg, 152 const u8 *buf, size_t len) 153{ 154 int ret; 155 156 ret = repaper_spi_transfer(spi, 0x70, ®, NULL, 1); 157 if (ret) 158 return ret; 159 160 return repaper_spi_transfer(spi, 0x72, buf, NULL, len); 161} 162 163static int repaper_write_val(struct spi_device *spi, u8 reg, u8 val) 164{ 165 return repaper_write_buf(spi, reg, &val, 1); 166} 167 168static int repaper_read_val(struct spi_device *spi, u8 reg) 169{ 170 int ret; 171 u8 val; 172 173 ret = repaper_spi_transfer(spi, 0x70, ®, NULL, 1); 174 if (ret) 175 return ret; 176 177 ret = repaper_spi_transfer(spi, 0x73, NULL, &val, 1); 178 179 return ret ? ret : val; 180} 181 182static int repaper_read_id(struct spi_device *spi) 183{ 184 int ret; 185 u8 id; 186 187 ret = repaper_spi_transfer(spi, 0x71, NULL, &id, 1); 188 189 return ret ? ret : id; 190} 191 192static void repaper_spi_mosi_low(struct spi_device *spi) 193{ 194 const u8 buf[1] = { 0 }; 195 196 spi_write(spi, buf, 1); 197} 198 199/* pixels on display are numbered from 1 so even is actually bits 1,3,5,... */ 200static void repaper_even_pixels(struct repaper_epd *epd, u8 **pp, 201 const u8 *data, u8 fixed_value, const u8 *mask, 202 enum repaper_stage stage) 203{ 204 unsigned int b; 205 206 for (b = 0; b < (epd->width / 8); b++) { 207 if (data) { 208 u8 pixels = data[b] & 0xaa; 209 u8 pixel_mask = 0xff; 210 u8 p1, p2, p3, p4; 211 212 if (mask) { 213 pixel_mask = (mask[b] ^ pixels) & 0xaa; 214 pixel_mask |= pixel_mask >> 1; 215 } 216 217 switch (stage) { 218 case REPAPER_COMPENSATE: /* B -> W, W -> B (Current) */ 219 pixels = 0xaa | ((pixels ^ 0xaa) >> 1); 220 break; 221 case REPAPER_WHITE: /* B -> N, W -> W (Current) */ 222 pixels = 0x55 + ((pixels ^ 0xaa) >> 1); 223 break; 224 case REPAPER_INVERSE: /* B -> N, W -> B (New) */ 225 pixels = 0x55 | (pixels ^ 0xaa); 226 break; 227 case REPAPER_NORMAL: /* B -> B, W -> W (New) */ 228 pixels = 0xaa | (pixels >> 1); 229 break; 230 } 231 232 pixels = (pixels & pixel_mask) | (~pixel_mask & 0x55); 233 p1 = (pixels >> 6) & 0x03; 234 p2 = (pixels >> 4) & 0x03; 235 p3 = (pixels >> 2) & 0x03; 236 p4 = (pixels >> 0) & 0x03; 237 pixels = (p1 << 0) | (p2 << 2) | (p3 << 4) | (p4 << 6); 238 *(*pp)++ = pixels; 239 } else { 240 *(*pp)++ = fixed_value; 241 } 242 } 243} 244 245/* pixels on display are numbered from 1 so odd is actually bits 0,2,4,... */ 246static void repaper_odd_pixels(struct repaper_epd *epd, u8 **pp, 247 const u8 *data, u8 fixed_value, const u8 *mask, 248 enum repaper_stage stage) 249{ 250 unsigned int b; 251 252 for (b = epd->width / 8; b > 0; b--) { 253 if (data) { 254 u8 pixels = data[b - 1] & 0x55; 255 u8 pixel_mask = 0xff; 256 257 if (mask) { 258 pixel_mask = (mask[b - 1] ^ pixels) & 0x55; 259 pixel_mask |= pixel_mask << 1; 260 } 261 262 switch (stage) { 263 case REPAPER_COMPENSATE: /* B -> W, W -> B (Current) */ 264 pixels = 0xaa | (pixels ^ 0x55); 265 break; 266 case REPAPER_WHITE: /* B -> N, W -> W (Current) */ 267 pixels = 0x55 + (pixels ^ 0x55); 268 break; 269 case REPAPER_INVERSE: /* B -> N, W -> B (New) */ 270 pixels = 0x55 | ((pixels ^ 0x55) << 1); 271 break; 272 case REPAPER_NORMAL: /* B -> B, W -> W (New) */ 273 pixels = 0xaa | pixels; 274 break; 275 } 276 277 pixels = (pixels & pixel_mask) | (~pixel_mask & 0x55); 278 *(*pp)++ = pixels; 279 } else { 280 *(*pp)++ = fixed_value; 281 } 282 } 283} 284 285/* interleave bits: (byte)76543210 -> (16 bit).7.6.5.4.3.2.1 */ 286static inline u16 repaper_interleave_bits(u16 value) 287{ 288 value = (value | (value << 4)) & 0x0f0f; 289 value = (value | (value << 2)) & 0x3333; 290 value = (value | (value << 1)) & 0x5555; 291 292 return value; 293} 294 295/* pixels on display are numbered from 1 */ 296static void repaper_all_pixels(struct repaper_epd *epd, u8 **pp, 297 const u8 *data, u8 fixed_value, const u8 *mask, 298 enum repaper_stage stage) 299{ 300 unsigned int b; 301 302 for (b = epd->width / 8; b > 0; b--) { 303 if (data) { 304 u16 pixels = repaper_interleave_bits(data[b - 1]); 305 u16 pixel_mask = 0xffff; 306 307 if (mask) { 308 pixel_mask = repaper_interleave_bits(mask[b - 1]); 309 310 pixel_mask = (pixel_mask ^ pixels) & 0x5555; 311 pixel_mask |= pixel_mask << 1; 312 } 313 314 switch (stage) { 315 case REPAPER_COMPENSATE: /* B -> W, W -> B (Current) */ 316 pixels = 0xaaaa | (pixels ^ 0x5555); 317 break; 318 case REPAPER_WHITE: /* B -> N, W -> W (Current) */ 319 pixels = 0x5555 + (pixels ^ 0x5555); 320 break; 321 case REPAPER_INVERSE: /* B -> N, W -> B (New) */ 322 pixels = 0x5555 | ((pixels ^ 0x5555) << 1); 323 break; 324 case REPAPER_NORMAL: /* B -> B, W -> W (New) */ 325 pixels = 0xaaaa | pixels; 326 break; 327 } 328 329 pixels = (pixels & pixel_mask) | (~pixel_mask & 0x5555); 330 *(*pp)++ = pixels >> 8; 331 *(*pp)++ = pixels; 332 } else { 333 *(*pp)++ = fixed_value; 334 *(*pp)++ = fixed_value; 335 } 336 } 337} 338 339/* output one line of scan and data bytes to the display */ 340static void repaper_one_line(struct repaper_epd *epd, unsigned int line, 341 const u8 *data, u8 fixed_value, const u8 *mask, 342 enum repaper_stage stage) 343{ 344 u8 *p = epd->line_buffer; 345 unsigned int b; 346 347 repaper_spi_mosi_low(epd->spi); 348 349 if (epd->pre_border_byte) 350 *p++ = 0x00; 351 352 if (epd->middle_scan) { 353 /* data bytes */ 354 repaper_odd_pixels(epd, &p, data, fixed_value, mask, stage); 355 356 /* scan line */ 357 for (b = epd->bytes_per_scan; b > 0; b--) { 358 if (line / 4 == b - 1) 359 *p++ = 0x03 << (2 * (line & 0x03)); 360 else 361 *p++ = 0x00; 362 } 363 364 /* data bytes */ 365 repaper_even_pixels(epd, &p, data, fixed_value, mask, stage); 366 } else { 367 /* 368 * even scan line, but as lines on display are numbered from 1, 369 * line: 1,3,5,... 370 */ 371 for (b = 0; b < epd->bytes_per_scan; b++) { 372 if (0 != (line & 0x01) && line / 8 == b) 373 *p++ = 0xc0 >> (line & 0x06); 374 else 375 *p++ = 0x00; 376 } 377 378 /* data bytes */ 379 repaper_all_pixels(epd, &p, data, fixed_value, mask, stage); 380 381 /* 382 * odd scan line, but as lines on display are numbered from 1, 383 * line: 0,2,4,6,... 384 */ 385 for (b = epd->bytes_per_scan; b > 0; b--) { 386 if (0 == (line & 0x01) && line / 8 == b - 1) 387 *p++ = 0x03 << (line & 0x06); 388 else 389 *p++ = 0x00; 390 } 391 } 392 393 switch (epd->border_byte) { 394 case REPAPER_BORDER_BYTE_NONE: 395 break; 396 397 case REPAPER_BORDER_BYTE_ZERO: 398 *p++ = 0x00; 399 break; 400 401 case REPAPER_BORDER_BYTE_SET: 402 switch (stage) { 403 case REPAPER_COMPENSATE: 404 case REPAPER_WHITE: 405 case REPAPER_INVERSE: 406 *p++ = 0x00; 407 break; 408 case REPAPER_NORMAL: 409 *p++ = 0xaa; 410 break; 411 } 412 break; 413 } 414 415 repaper_write_buf(epd->spi, 0x0a, epd->line_buffer, 416 p - epd->line_buffer); 417 418 /* Output data to panel */ 419 repaper_write_val(epd->spi, 0x02, 0x07); 420 421 repaper_spi_mosi_low(epd->spi); 422} 423 424static void repaper_frame_fixed(struct repaper_epd *epd, u8 fixed_value, 425 enum repaper_stage stage) 426{ 427 unsigned int line; 428 429 for (line = 0; line < epd->height; line++) 430 repaper_one_line(epd, line, NULL, fixed_value, NULL, stage); 431} 432 433static void repaper_frame_data(struct repaper_epd *epd, const u8 *image, 434 const u8 *mask, enum repaper_stage stage) 435{ 436 unsigned int line; 437 438 if (!mask) { 439 for (line = 0; line < epd->height; line++) { 440 repaper_one_line(epd, line, 441 &image[line * (epd->width / 8)], 442 0, NULL, stage); 443 } 444 } else { 445 for (line = 0; line < epd->height; line++) { 446 size_t n = line * epd->width / 8; 447 448 repaper_one_line(epd, line, &image[n], 0, &mask[n], 449 stage); 450 } 451 } 452} 453 454static void repaper_frame_fixed_repeat(struct repaper_epd *epd, u8 fixed_value, 455 enum repaper_stage stage) 456{ 457 u64 start = local_clock(); 458 u64 end = start + (epd->factored_stage_time * 1000 * 1000); 459 460 do { 461 repaper_frame_fixed(epd, fixed_value, stage); 462 } while (local_clock() < end); 463} 464 465static void repaper_frame_data_repeat(struct repaper_epd *epd, const u8 *image, 466 const u8 *mask, enum repaper_stage stage) 467{ 468 u64 start = local_clock(); 469 u64 end = start + (epd->factored_stage_time * 1000 * 1000); 470 471 do { 472 repaper_frame_data(epd, image, mask, stage); 473 } while (local_clock() < end); 474} 475 476static void repaper_get_temperature(struct repaper_epd *epd) 477{ 478 int ret, temperature = 0; 479 unsigned int factor10x; 480 481 if (!epd->thermal) 482 return; 483 484 ret = thermal_zone_get_temp(epd->thermal, &temperature); 485 if (ret) { 486 DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n", ret); 487 return; 488 } 489 490 temperature /= 1000; 491 492 if (temperature <= -10) 493 factor10x = 170; 494 else if (temperature <= -5) 495 factor10x = 120; 496 else if (temperature <= 5) 497 factor10x = 80; 498 else if (temperature <= 10) 499 factor10x = 40; 500 else if (temperature <= 15) 501 factor10x = 30; 502 else if (temperature <= 20) 503 factor10x = 20; 504 else if (temperature <= 40) 505 factor10x = 10; 506 else 507 factor10x = 7; 508 509 epd->factored_stage_time = epd->stage_time * factor10x / 10; 510} 511 512static int repaper_fb_dirty(struct drm_framebuffer *fb, 513 struct drm_format_conv_state *fmtcnv_state) 514{ 515 struct drm_gem_dma_object *dma_obj = drm_fb_dma_get_gem_obj(fb, 0); 516 struct repaper_epd *epd = drm_to_epd(fb->dev); 517 unsigned int dst_pitch = 0; 518 struct iosys_map dst, vmap; 519 struct drm_rect clip; 520 int idx, ret = 0; 521 u8 *buf = NULL; 522 523 if (!drm_dev_enter(fb->dev, &idx)) 524 return -ENODEV; 525 526 /* repaper can't do partial updates */ 527 clip.x1 = 0; 528 clip.x2 = fb->width; 529 clip.y1 = 0; 530 clip.y2 = fb->height; 531 532 repaper_get_temperature(epd); 533 534 DRM_DEBUG("Flushing [FB:%d] st=%ums\n", fb->base.id, 535 epd->factored_stage_time); 536 537 buf = kmalloc(fb->width * fb->height / 8, GFP_KERNEL); 538 if (!buf) { 539 ret = -ENOMEM; 540 goto out_exit; 541 } 542 543 ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE); 544 if (ret) 545 goto out_free; 546 547 iosys_map_set_vaddr(&dst, buf); 548 iosys_map_set_vaddr(&vmap, dma_obj->vaddr); 549 drm_fb_xrgb8888_to_mono(&dst, &dst_pitch, &vmap, fb, &clip, fmtcnv_state); 550 551 drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE); 552 553 if (epd->partial) { 554 repaper_frame_data_repeat(epd, buf, epd->current_frame, 555 REPAPER_NORMAL); 556 } else if (epd->cleared) { 557 repaper_frame_data_repeat(epd, epd->current_frame, NULL, 558 REPAPER_COMPENSATE); 559 repaper_frame_data_repeat(epd, epd->current_frame, NULL, 560 REPAPER_WHITE); 561 repaper_frame_data_repeat(epd, buf, NULL, REPAPER_INVERSE); 562 repaper_frame_data_repeat(epd, buf, NULL, REPAPER_NORMAL); 563 564 epd->partial = true; 565 } else { 566 /* Clear display (anything -> white) */ 567 repaper_frame_fixed_repeat(epd, 0xff, REPAPER_COMPENSATE); 568 repaper_frame_fixed_repeat(epd, 0xff, REPAPER_WHITE); 569 repaper_frame_fixed_repeat(epd, 0xaa, REPAPER_INVERSE); 570 repaper_frame_fixed_repeat(epd, 0xaa, REPAPER_NORMAL); 571 572 /* Assuming a clear (white) screen output an image */ 573 repaper_frame_fixed_repeat(epd, 0xaa, REPAPER_COMPENSATE); 574 repaper_frame_fixed_repeat(epd, 0xaa, REPAPER_WHITE); 575 repaper_frame_data_repeat(epd, buf, NULL, REPAPER_INVERSE); 576 repaper_frame_data_repeat(epd, buf, NULL, REPAPER_NORMAL); 577 578 epd->cleared = true; 579 epd->partial = true; 580 } 581 582 memcpy(epd->current_frame, buf, fb->width * fb->height / 8); 583 584 /* 585 * An extra frame write is needed if pixels are set in the bottom line, 586 * or else grey lines rises up from the pixels 587 */ 588 if (epd->pre_border_byte) { 589 unsigned int x; 590 591 for (x = 0; x < (fb->width / 8); x++) 592 if (buf[x + (fb->width * (fb->height - 1) / 8)]) { 593 repaper_frame_data_repeat(epd, buf, 594 epd->current_frame, 595 REPAPER_NORMAL); 596 break; 597 } 598 } 599 600out_free: 601 kfree(buf); 602out_exit: 603 drm_dev_exit(idx); 604 605 return ret; 606} 607 608static void power_off(struct repaper_epd *epd) 609{ 610 /* Turn off power and all signals */ 611 gpiod_set_value_cansleep(epd->reset, 0); 612 gpiod_set_value_cansleep(epd->panel_on, 0); 613 if (epd->border) 614 gpiod_set_value_cansleep(epd->border, 0); 615 616 /* Ensure SPI MOSI and CLOCK are Low before CS Low */ 617 repaper_spi_mosi_low(epd->spi); 618 619 /* Discharge pulse */ 620 gpiod_set_value_cansleep(epd->discharge, 1); 621 msleep(150); 622 gpiod_set_value_cansleep(epd->discharge, 0); 623} 624 625static enum drm_mode_status repaper_pipe_mode_valid(struct drm_simple_display_pipe *pipe, 626 const struct drm_display_mode *mode) 627{ 628 struct drm_crtc *crtc = &pipe->crtc; 629 struct repaper_epd *epd = drm_to_epd(crtc->dev); 630 631 return drm_crtc_helper_mode_valid_fixed(crtc, mode, epd->mode); 632} 633 634static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, 635 struct drm_crtc_state *crtc_state, 636 struct drm_plane_state *plane_state) 637{ 638 struct repaper_epd *epd = drm_to_epd(pipe->crtc.dev); 639 struct spi_device *spi = epd->spi; 640 struct device *dev = &spi->dev; 641 bool dc_ok = false; 642 int i, ret, idx; 643 644 if (!drm_dev_enter(pipe->crtc.dev, &idx)) 645 return; 646 647 DRM_DEBUG_DRIVER("\n"); 648 649 /* Power up sequence */ 650 gpiod_set_value_cansleep(epd->reset, 0); 651 gpiod_set_value_cansleep(epd->panel_on, 0); 652 gpiod_set_value_cansleep(epd->discharge, 0); 653 if (epd->border) 654 gpiod_set_value_cansleep(epd->border, 0); 655 repaper_spi_mosi_low(spi); 656 usleep_range(5000, 10000); 657 658 gpiod_set_value_cansleep(epd->panel_on, 1); 659 /* 660 * This delay comes from the repaper.org userspace driver, it's not 661 * mentioned in the datasheet. 662 */ 663 usleep_range(10000, 15000); 664 gpiod_set_value_cansleep(epd->reset, 1); 665 if (epd->border) 666 gpiod_set_value_cansleep(epd->border, 1); 667 usleep_range(5000, 10000); 668 gpiod_set_value_cansleep(epd->reset, 0); 669 usleep_range(5000, 10000); 670 gpiod_set_value_cansleep(epd->reset, 1); 671 usleep_range(5000, 10000); 672 673 /* Wait for COG to become ready */ 674 for (i = 100; i > 0; i--) { 675 if (!gpiod_get_value_cansleep(epd->busy)) 676 break; 677 678 usleep_range(10, 100); 679 } 680 681 if (!i) { 682 DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n"); 683 power_off(epd); 684 goto out_exit; 685 } 686 687 repaper_read_id(spi); 688 ret = repaper_read_id(spi); 689 if (ret != REPAPER_RID_G2_COG_ID) { 690 if (ret < 0) 691 dev_err(dev, "failed to read chip (%d)\n", ret); 692 else 693 dev_err(dev, "wrong COG ID 0x%02x\n", ret); 694 power_off(epd); 695 goto out_exit; 696 } 697 698 /* Disable OE */ 699 repaper_write_val(spi, 0x02, 0x40); 700 701 ret = repaper_read_val(spi, 0x0f); 702 if (ret < 0 || !(ret & 0x80)) { 703 if (ret < 0) 704 DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret); 705 else 706 DRM_DEV_ERROR(dev, "panel is reported broken\n"); 707 power_off(epd); 708 goto out_exit; 709 } 710 711 /* Power saving mode */ 712 repaper_write_val(spi, 0x0b, 0x02); 713 /* Channel select */ 714 repaper_write_buf(spi, 0x01, epd->channel_select, 8); 715 /* High power mode osc */ 716 repaper_write_val(spi, 0x07, 0xd1); 717 /* Power setting */ 718 repaper_write_val(spi, 0x08, 0x02); 719 /* Vcom level */ 720 repaper_write_val(spi, 0x09, 0xc2); 721 /* Power setting */ 722 repaper_write_val(spi, 0x04, 0x03); 723 /* Driver latch on */ 724 repaper_write_val(spi, 0x03, 0x01); 725 /* Driver latch off */ 726 repaper_write_val(spi, 0x03, 0x00); 727 usleep_range(5000, 10000); 728 729 /* Start chargepump */ 730 for (i = 0; i < 4; ++i) { 731 /* Charge pump positive voltage on - VGH/VDL on */ 732 repaper_write_val(spi, 0x05, 0x01); 733 msleep(240); 734 735 /* Charge pump negative voltage on - VGL/VDL on */ 736 repaper_write_val(spi, 0x05, 0x03); 737 msleep(40); 738 739 /* Charge pump Vcom on - Vcom driver on */ 740 repaper_write_val(spi, 0x05, 0x0f); 741 msleep(40); 742 743 /* check DC/DC */ 744 ret = repaper_read_val(spi, 0x0f); 745 if (ret < 0) { 746 DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret); 747 power_off(epd); 748 goto out_exit; 749 } 750 751 if (ret & 0x40) { 752 dc_ok = true; 753 break; 754 } 755 } 756 757 if (!dc_ok) { 758 DRM_DEV_ERROR(dev, "dc/dc failed\n"); 759 power_off(epd); 760 goto out_exit; 761 } 762 763 /* 764 * Output enable to disable 765 * The userspace driver sets this to 0x04, but the datasheet says 0x06 766 */ 767 repaper_write_val(spi, 0x02, 0x04); 768 769 epd->partial = false; 770out_exit: 771 drm_dev_exit(idx); 772} 773 774static void repaper_pipe_disable(struct drm_simple_display_pipe *pipe) 775{ 776 struct repaper_epd *epd = drm_to_epd(pipe->crtc.dev); 777 struct spi_device *spi = epd->spi; 778 unsigned int line; 779 780 /* 781 * This callback is not protected by drm_dev_enter/exit since we want to 782 * turn off the display on regular driver unload. It's highly unlikely 783 * that the underlying SPI controller is gone should this be called after 784 * unplug. 785 */ 786 787 DRM_DEBUG_DRIVER("\n"); 788 789 /* Nothing frame */ 790 for (line = 0; line < epd->height; line++) 791 repaper_one_line(epd, 0x7fffu, NULL, 0x00, NULL, 792 REPAPER_COMPENSATE); 793 794 /* 2.7" */ 795 if (epd->border) { 796 /* Dummy line */ 797 repaper_one_line(epd, 0x7fffu, NULL, 0x00, NULL, 798 REPAPER_COMPENSATE); 799 msleep(25); 800 gpiod_set_value_cansleep(epd->border, 0); 801 msleep(200); 802 gpiod_set_value_cansleep(epd->border, 1); 803 } else { 804 /* Border dummy line */ 805 repaper_one_line(epd, 0x7fffu, NULL, 0x00, NULL, 806 REPAPER_NORMAL); 807 msleep(200); 808 } 809 810 /* not described in datasheet */ 811 repaper_write_val(spi, 0x0b, 0x00); 812 /* Latch reset turn on */ 813 repaper_write_val(spi, 0x03, 0x01); 814 /* Power off charge pump Vcom */ 815 repaper_write_val(spi, 0x05, 0x03); 816 /* Power off charge pump neg voltage */ 817 repaper_write_val(spi, 0x05, 0x01); 818 msleep(120); 819 /* Discharge internal */ 820 repaper_write_val(spi, 0x04, 0x80); 821 /* turn off all charge pumps */ 822 repaper_write_val(spi, 0x05, 0x00); 823 /* Turn off osc */ 824 repaper_write_val(spi, 0x07, 0x01); 825 msleep(50); 826 827 power_off(epd); 828} 829 830static void repaper_pipe_update(struct drm_simple_display_pipe *pipe, 831 struct drm_plane_state *old_state) 832{ 833 struct drm_plane_state *state = pipe->plane.state; 834 struct drm_format_conv_state fmtcnv_state = DRM_FORMAT_CONV_STATE_INIT; 835 struct drm_rect rect; 836 837 if (!pipe->crtc.state->active) 838 return; 839 840 if (drm_atomic_helper_damage_merged(old_state, state, &rect)) 841 repaper_fb_dirty(state->fb, &fmtcnv_state); 842 843 drm_format_conv_state_release(&fmtcnv_state); 844} 845 846static const struct drm_simple_display_pipe_funcs repaper_pipe_funcs = { 847 .mode_valid = repaper_pipe_mode_valid, 848 .enable = repaper_pipe_enable, 849 .disable = repaper_pipe_disable, 850 .update = repaper_pipe_update, 851}; 852 853static int repaper_connector_get_modes(struct drm_connector *connector) 854{ 855 struct repaper_epd *epd = drm_to_epd(connector->dev); 856 857 return drm_connector_helper_get_modes_fixed(connector, epd->mode); 858} 859 860static const struct drm_connector_helper_funcs repaper_connector_hfuncs = { 861 .get_modes = repaper_connector_get_modes, 862}; 863 864static const struct drm_connector_funcs repaper_connector_funcs = { 865 .reset = drm_atomic_helper_connector_reset, 866 .fill_modes = drm_helper_probe_single_connector_modes, 867 .destroy = drm_connector_cleanup, 868 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, 869 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, 870}; 871 872static const struct drm_mode_config_funcs repaper_mode_config_funcs = { 873 .fb_create = drm_gem_fb_create_with_dirty, 874 .atomic_check = drm_atomic_helper_check, 875 .atomic_commit = drm_atomic_helper_commit, 876}; 877 878static const uint32_t repaper_formats[] = { 879 DRM_FORMAT_XRGB8888, 880}; 881 882static const struct drm_display_mode repaper_e1144cs021_mode = { 883 DRM_SIMPLE_MODE(128, 96, 29, 22), 884}; 885 886static const u8 repaper_e1144cs021_cs[] = { 0x00, 0x00, 0x00, 0x00, 887 0x00, 0x0f, 0xff, 0x00 }; 888 889static const struct drm_display_mode repaper_e1190cs021_mode = { 890 DRM_SIMPLE_MODE(144, 128, 36, 32), 891}; 892 893static const u8 repaper_e1190cs021_cs[] = { 0x00, 0x00, 0x00, 0x03, 894 0xfc, 0x00, 0x00, 0xff }; 895 896static const struct drm_display_mode repaper_e2200cs021_mode = { 897 DRM_SIMPLE_MODE(200, 96, 46, 22), 898}; 899 900static const u8 repaper_e2200cs021_cs[] = { 0x00, 0x00, 0x00, 0x00, 901 0x01, 0xff, 0xe0, 0x00 }; 902 903static const struct drm_display_mode repaper_e2271cs021_mode = { 904 DRM_SIMPLE_MODE(264, 176, 57, 38), 905}; 906 907static const u8 repaper_e2271cs021_cs[] = { 0x00, 0x00, 0x00, 0x7f, 908 0xff, 0xfe, 0x00, 0x00 }; 909 910DEFINE_DRM_GEM_DMA_FOPS(repaper_fops); 911 912static const struct drm_driver repaper_driver = { 913 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, 914 .fops = &repaper_fops, 915 DRM_GEM_DMA_DRIVER_OPS_VMAP, 916 .name = "repaper", 917 .desc = "Pervasive Displays RePaper e-ink panels", 918 .date = "20170405", 919 .major = 1, 920 .minor = 0, 921}; 922 923static const struct of_device_id repaper_of_match[] = { 924 { .compatible = "pervasive,e1144cs021", .data = (void *)E1144CS021 }, 925 { .compatible = "pervasive,e1190cs021", .data = (void *)E1190CS021 }, 926 { .compatible = "pervasive,e2200cs021", .data = (void *)E2200CS021 }, 927 { .compatible = "pervasive,e2271cs021", .data = (void *)E2271CS021 }, 928 {}, 929}; 930MODULE_DEVICE_TABLE(of, repaper_of_match); 931 932static const struct spi_device_id repaper_id[] = { 933 { "e1144cs021", E1144CS021 }, 934 { "e1190cs021", E1190CS021 }, 935 { "e2200cs021", E2200CS021 }, 936 { "e2271cs021", E2271CS021 }, 937 { }, 938}; 939MODULE_DEVICE_TABLE(spi, repaper_id); 940 941static int repaper_probe(struct spi_device *spi) 942{ 943 const struct drm_display_mode *mode; 944 const struct spi_device_id *spi_id; 945 struct device *dev = &spi->dev; 946 enum repaper_model model; 947 const char *thermal_zone; 948 struct repaper_epd *epd; 949 size_t line_buffer_size; 950 struct drm_device *drm; 951 const void *match; 952 int ret; 953 954 match = device_get_match_data(dev); 955 if (match) { 956 model = (enum repaper_model)(uintptr_t)match; 957 } else { 958 spi_id = spi_get_device_id(spi); 959 model = (enum repaper_model)spi_id->driver_data; 960 } 961 962 /* The SPI device is used to allocate dma memory */ 963 if (!dev->coherent_dma_mask) { 964 ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); 965 if (ret) { 966 dev_warn(dev, "Failed to set dma mask %d\n", ret); 967 return ret; 968 } 969 } 970 971 epd = devm_drm_dev_alloc(dev, &repaper_driver, 972 struct repaper_epd, drm); 973 if (IS_ERR(epd)) 974 return PTR_ERR(epd); 975 976 drm = &epd->drm; 977 978 ret = drmm_mode_config_init(drm); 979 if (ret) 980 return ret; 981 drm->mode_config.funcs = &repaper_mode_config_funcs; 982 983 epd->spi = spi; 984 985 epd->panel_on = devm_gpiod_get(dev, "panel-on", GPIOD_OUT_LOW); 986 if (IS_ERR(epd->panel_on)) { 987 ret = PTR_ERR(epd->panel_on); 988 if (ret != -EPROBE_DEFER) 989 DRM_DEV_ERROR(dev, "Failed to get gpio 'panel-on'\n"); 990 return ret; 991 } 992 993 epd->discharge = devm_gpiod_get(dev, "discharge", GPIOD_OUT_LOW); 994 if (IS_ERR(epd->discharge)) { 995 ret = PTR_ERR(epd->discharge); 996 if (ret != -EPROBE_DEFER) 997 DRM_DEV_ERROR(dev, "Failed to get gpio 'discharge'\n"); 998 return ret; 999 } 1000 1001 epd->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); 1002 if (IS_ERR(epd->reset)) { 1003 ret = PTR_ERR(epd->reset); 1004 if (ret != -EPROBE_DEFER) 1005 DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); 1006 return ret; 1007 } 1008 1009 epd->busy = devm_gpiod_get(dev, "busy", GPIOD_IN); 1010 if (IS_ERR(epd->busy)) { 1011 ret = PTR_ERR(epd->busy); 1012 if (ret != -EPROBE_DEFER) 1013 DRM_DEV_ERROR(dev, "Failed to get gpio 'busy'\n"); 1014 return ret; 1015 } 1016 1017 if (!device_property_read_string(dev, "pervasive,thermal-zone", 1018 &thermal_zone)) { 1019 epd->thermal = thermal_zone_get_zone_by_name(thermal_zone); 1020 if (IS_ERR(epd->thermal)) { 1021 DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n", thermal_zone); 1022 return PTR_ERR(epd->thermal); 1023 } 1024 } 1025 1026 switch (model) { 1027 case E1144CS021: 1028 mode = &repaper_e1144cs021_mode; 1029 epd->channel_select = repaper_e1144cs021_cs; 1030 epd->stage_time = 480; 1031 epd->bytes_per_scan = 96 / 4; 1032 epd->middle_scan = true; /* data-scan-data */ 1033 epd->pre_border_byte = false; 1034 epd->border_byte = REPAPER_BORDER_BYTE_ZERO; 1035 break; 1036 1037 case E1190CS021: 1038 mode = &repaper_e1190cs021_mode; 1039 epd->channel_select = repaper_e1190cs021_cs; 1040 epd->stage_time = 480; 1041 epd->bytes_per_scan = 128 / 4 / 2; 1042 epd->middle_scan = false; /* scan-data-scan */ 1043 epd->pre_border_byte = false; 1044 epd->border_byte = REPAPER_BORDER_BYTE_SET; 1045 break; 1046 1047 case E2200CS021: 1048 mode = &repaper_e2200cs021_mode; 1049 epd->channel_select = repaper_e2200cs021_cs; 1050 epd->stage_time = 480; 1051 epd->bytes_per_scan = 96 / 4; 1052 epd->middle_scan = true; /* data-scan-data */ 1053 epd->pre_border_byte = true; 1054 epd->border_byte = REPAPER_BORDER_BYTE_NONE; 1055 break; 1056 1057 case E2271CS021: 1058 epd->border = devm_gpiod_get(dev, "border", GPIOD_OUT_LOW); 1059 if (IS_ERR(epd->border)) { 1060 ret = PTR_ERR(epd->border); 1061 if (ret != -EPROBE_DEFER) 1062 DRM_DEV_ERROR(dev, "Failed to get gpio 'border'\n"); 1063 return ret; 1064 } 1065 1066 mode = &repaper_e2271cs021_mode; 1067 epd->channel_select = repaper_e2271cs021_cs; 1068 epd->stage_time = 630; 1069 epd->bytes_per_scan = 176 / 4; 1070 epd->middle_scan = true; /* data-scan-data */ 1071 epd->pre_border_byte = true; 1072 epd->border_byte = REPAPER_BORDER_BYTE_NONE; 1073 break; 1074 1075 default: 1076 return -ENODEV; 1077 } 1078 1079 epd->mode = mode; 1080 epd->width = mode->hdisplay; 1081 epd->height = mode->vdisplay; 1082 epd->factored_stage_time = epd->stage_time; 1083 1084 line_buffer_size = 2 * epd->width / 8 + epd->bytes_per_scan + 2; 1085 epd->line_buffer = devm_kzalloc(dev, line_buffer_size, GFP_KERNEL); 1086 if (!epd->line_buffer) 1087 return -ENOMEM; 1088 1089 epd->current_frame = devm_kzalloc(dev, epd->width * epd->height / 8, 1090 GFP_KERNEL); 1091 if (!epd->current_frame) 1092 return -ENOMEM; 1093 1094 drm->mode_config.min_width = mode->hdisplay; 1095 drm->mode_config.max_width = mode->hdisplay; 1096 drm->mode_config.min_height = mode->vdisplay; 1097 drm->mode_config.max_height = mode->vdisplay; 1098 1099 drm_connector_helper_add(&epd->connector, &repaper_connector_hfuncs); 1100 ret = drm_connector_init(drm, &epd->connector, &repaper_connector_funcs, 1101 DRM_MODE_CONNECTOR_SPI); 1102 if (ret) 1103 return ret; 1104 1105 ret = drm_simple_display_pipe_init(drm, &epd->pipe, &repaper_pipe_funcs, 1106 repaper_formats, ARRAY_SIZE(repaper_formats), 1107 NULL, &epd->connector); 1108 if (ret) 1109 return ret; 1110 1111 drm_mode_config_reset(drm); 1112 1113 ret = drm_dev_register(drm, 0); 1114 if (ret) 1115 return ret; 1116 1117 spi_set_drvdata(spi, drm); 1118 1119 DRM_DEBUG_DRIVER("SPI speed: %uMHz\n", spi->max_speed_hz / 1000000); 1120 1121 drm_fbdev_generic_setup(drm, 0); 1122 1123 return 0; 1124} 1125 1126static void repaper_remove(struct spi_device *spi) 1127{ 1128 struct drm_device *drm = spi_get_drvdata(spi); 1129 1130 drm_dev_unplug(drm); 1131 drm_atomic_helper_shutdown(drm); 1132} 1133 1134static void repaper_shutdown(struct spi_device *spi) 1135{ 1136 drm_atomic_helper_shutdown(spi_get_drvdata(spi)); 1137} 1138 1139static struct spi_driver repaper_spi_driver = { 1140 .driver = { 1141 .name = "repaper", 1142 .of_match_table = repaper_of_match, 1143 }, 1144 .id_table = repaper_id, 1145 .probe = repaper_probe, 1146 .remove = repaper_remove, 1147 .shutdown = repaper_shutdown, 1148}; 1149module_spi_driver(repaper_spi_driver); 1150 1151MODULE_DESCRIPTION("Pervasive Displays RePaper DRM driver"); 1152MODULE_AUTHOR("Noralf Tr��nnes"); 1153MODULE_LICENSE("GPL"); 1154