1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Copyright (C) 2020 BayLibre, SAS 4 * Author: Neil Armstrong <narmstrong@baylibre.com> 5 * Copyright (C) 2018 Amlogic, Inc. All rights reserved. 6 */ 7 8#ifndef __MESON_DW_MIPI_DSI_H 9#define __MESON_DW_MIPI_DSI_H 10 11/* Top-level registers */ 12/* [31: 4] Reserved. Default 0. 13 * [3] RW timing_rst_n: Default 1. 14 * 1=Assert SW reset of timing feature. 0=Release reset. 15 * [2] RW dpi_rst_n: Default 1. 16 * 1=Assert SW reset on mipi_dsi_host_dpi block. 0=Release reset. 17 * [1] RW intr_rst_n: Default 1. 18 * 1=Assert SW reset on mipi_dsi_host_intr block. 0=Release reset. 19 * [0] RW dwc_rst_n: Default 1. 20 * 1=Assert SW reset on IP core. 0=Release reset. 21 */ 22#define MIPI_DSI_TOP_SW_RESET 0x3c0 23 24#define MIPI_DSI_TOP_SW_RESET_DWC BIT(0) 25#define MIPI_DSI_TOP_SW_RESET_INTR BIT(1) 26#define MIPI_DSI_TOP_SW_RESET_DPI BIT(2) 27#define MIPI_DSI_TOP_SW_RESET_TIMING BIT(3) 28 29/* [31: 5] Reserved. Default 0. 30 * [4] RW manual_edpihalt: Default 0. 31 * 1=Manual suspend VencL; 0=do not suspend VencL. 32 * [3] RW auto_edpihalt_en: Default 0. 33 * 1=Enable IP's edpihalt signal to suspend VencL; 34 * 0=IP's edpihalt signal does not affect VencL. 35 * [2] RW clock_freerun: Apply to auto-clock gate only. Default 0. 36 * 0=Default, use auto-clock gating to save power; 37 * 1=use free-run clock, disable auto-clock gating, for debug mode. 38 * [1] RW enable_pixclk: A manual clock gate option, due to DWC IP does not 39 * have auto-clock gating. 1=Enable pixclk. Default 0. 40 * [0] RW enable_sysclk: A manual clock gate option, due to DWC IP does not 41 * have auto-clock gating. 1=Enable sysclk. Default 0. 42 */ 43#define MIPI_DSI_TOP_CLK_CNTL 0x3c4 44 45#define MIPI_DSI_TOP_CLK_SYSCLK_EN BIT(0) 46#define MIPI_DSI_TOP_CLK_PIXCLK_EN BIT(1) 47 48/* [31:24] Reserved. Default 0. 49 * [23:20] RW dpi_color_mode: Define DPI pixel format. Default 0. 50 * 0=16-bit RGB565 config 1; 51 * 1=16-bit RGB565 config 2; 52 * 2=16-bit RGB565 config 3; 53 * 3=18-bit RGB666 config 1; 54 * 4=18-bit RGB666 config 2; 55 * 5=24-bit RGB888; 56 * 6=20-bit YCbCr 4:2:2; 57 * 7=24-bit YCbCr 4:2:2; 58 * 8=16-bit YCbCr 4:2:2; 59 * 9=30-bit RGB; 60 * 10=36-bit RGB; 61 * 11=12-bit YCbCr 4:2:0. 62 * [19] Reserved. Default 0. 63 * [18:16] RW in_color_mode: Define VENC data width. Default 0. 64 * 0=30-bit pixel; 65 * 1=24-bit pixel; 66 * 2=18-bit pixel, RGB666; 67 * 3=16-bit pixel, RGB565. 68 * [15:14] RW chroma_subsample: Define method of chroma subsampling. Default 0. 69 * Applicable to YUV422 or YUV420 only. 70 * 0=Use even pixel's chroma; 71 * 1=Use odd pixel's chroma; 72 * 2=Use averaged value between even and odd pair. 73 * [13:12] RW comp2_sel: Select which component to be Cr or B: Default 2. 74 * 0=comp0; 1=comp1; 2=comp2. 75 * [11:10] RW comp1_sel: Select which component to be Cb or G: Default 1. 76 * 0=comp0; 1=comp1; 2=comp2. 77 * [9: 8] RW comp0_sel: Select which component to be Y or R: Default 0. 78 * 0=comp0; 1=comp1; 2=comp2. 79 * [7] Reserved. Default 0. 80 * [6] RW de_pol: Default 0. 81 * If DE input is active low, set to 1 to invert to active high. 82 * [5] RW hsync_pol: Default 0. 83 * If HS input is active low, set to 1 to invert to active high. 84 * [4] RW vsync_pol: Default 0. 85 * If VS input is active low, set to 1 to invert to active high. 86 * [3] RW dpicolorm: Signal to IP. Default 0. 87 * [2] RW dpishutdn: Signal to IP. Default 0. 88 * [1] Reserved. Default 0. 89 * [0] Reserved. Default 0. 90 */ 91#define MIPI_DSI_TOP_CNTL 0x3c8 92 93/* VENC data width */ 94#define VENC_IN_COLOR_30B 0x0 95#define VENC_IN_COLOR_24B 0x1 96#define VENC_IN_COLOR_18B 0x2 97#define VENC_IN_COLOR_16B 0x3 98 99/* DPI pixel format */ 100#define DPI_COLOR_16BIT_CFG_1 0 101#define DPI_COLOR_16BIT_CFG_2 1 102#define DPI_COLOR_16BIT_CFG_3 2 103#define DPI_COLOR_18BIT_CFG_1 3 104#define DPI_COLOR_18BIT_CFG_2 4 105#define DPI_COLOR_24BIT 5 106#define DPI_COLOR_20BIT_YCBCR_422 6 107#define DPI_COLOR_24BIT_YCBCR_422 7 108#define DPI_COLOR_16BIT_YCBCR_422 8 109#define DPI_COLOR_30BIT 9 110#define DPI_COLOR_36BIT 10 111#define DPI_COLOR_12BIT_YCBCR_420 11 112 113#define MIPI_DSI_TOP_DPI_COLOR_MODE GENMASK(23, 20) 114#define MIPI_DSI_TOP_IN_COLOR_MODE GENMASK(18, 16) 115#define MIPI_DSI_TOP_CHROMA_SUBSAMPLE GENMASK(15, 14) 116#define MIPI_DSI_TOP_COMP2_SEL GENMASK(13, 12) 117#define MIPI_DSI_TOP_COMP1_SEL GENMASK(11, 10) 118#define MIPI_DSI_TOP_COMP0_SEL GENMASK(9, 8) 119#define MIPI_DSI_TOP_DE_INVERT BIT(6) 120#define MIPI_DSI_TOP_HSYNC_INVERT BIT(5) 121#define MIPI_DSI_TOP_VSYNC_INVERT BIT(4) 122#define MIPI_DSI_TOP_DPICOLORM BIT(3) 123#define MIPI_DSI_TOP_DPISHUTDN BIT(2) 124 125#define MIPI_DSI_TOP_SUSPEND_CNTL 0x3cc 126#define MIPI_DSI_TOP_SUSPEND_LINE 0x3d0 127#define MIPI_DSI_TOP_SUSPEND_PIX 0x3d4 128#define MIPI_DSI_TOP_MEAS_CNTL 0x3d8 129/* [0] R stat_edpihalt: edpihalt signal from IP. Default 0. */ 130#define MIPI_DSI_TOP_STAT 0x3dc 131#define MIPI_DSI_TOP_MEAS_STAT_TE0 0x3e0 132#define MIPI_DSI_TOP_MEAS_STAT_TE1 0x3e4 133#define MIPI_DSI_TOP_MEAS_STAT_VS0 0x3e8 134#define MIPI_DSI_TOP_MEAS_STAT_VS1 0x3ec 135/* [31:16] RW intr_stat/clr. Default 0. 136 * For each bit, read as this interrupt level status, 137 * write 1 to clear. 138 * [31:22] Reserved 139 * [ 21] stat/clr of eof interrupt 140 * [ 21] vde_fall interrupt 141 * [ 19] stat/clr of de_rise interrupt 142 * [ 18] stat/clr of vs_fall interrupt 143 * [ 17] stat/clr of vs_rise interrupt 144 * [ 16] stat/clr of dwc_edpite interrupt 145 * [15: 0] RW intr_enable. Default 0. 146 * For each bit, 1=enable this interrupt, 0=disable. 147 * [15: 6] Reserved 148 * [ 5] eof interrupt 149 * [ 4] de_fall interrupt 150 * [ 3] de_rise interrupt 151 * [ 2] vs_fall interrupt 152 * [ 1] vs_rise interrupt 153 * [ 0] dwc_edpite interrupt 154 */ 155#define MIPI_DSI_TOP_INTR_CNTL_STAT 0x3f0 156// 31: 2 Reserved. Default 0. 157// 1: 0 RW mem_pd. Default 3. 158#define MIPI_DSI_TOP_MEM_PD 0x3f4 159 160#endif /* __MESON_DW_MIPI_DSI_H */ 161