1/* 2 * Copyright 2012-20 Advanced Micro Devices, Inc. 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 20 * OTHER DEALINGS IN THE SOFTWARE. 21 * 22 * Authors: AMD 23 * 24 */ 25 26#include "dm_services.h" 27#include "dce_calcs.h" 28#include "reg_helper.h" 29#include "basics/conversion.h" 30#include "dcn32_hubp.h" 31 32#define REG(reg)\ 33 hubp2->hubp_regs->reg 34 35#define CTX \ 36 hubp2->base.ctx 37 38#undef FN 39#define FN(reg_name, field_name) \ 40 hubp2->hubp_shift->field_name, hubp2->hubp_mask->field_name 41 42void hubp32_update_force_pstate_disallow(struct hubp *hubp, bool pstate_disallow) 43{ 44 struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp); 45 REG_UPDATE_2(UCLK_PSTATE_FORCE, 46 DATA_UCLK_PSTATE_FORCE_EN, pstate_disallow, 47 DATA_UCLK_PSTATE_FORCE_VALUE, 0); 48} 49 50void hubp32_update_force_cursor_pstate_disallow(struct hubp *hubp, bool pstate_disallow) 51{ 52 struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp); 53 54 REG_UPDATE_2(UCLK_PSTATE_FORCE, 55 CURSOR_UCLK_PSTATE_FORCE_EN, pstate_disallow, 56 CURSOR_UCLK_PSTATE_FORCE_VALUE, 0); 57} 58 59void hubp32_update_mall_sel(struct hubp *hubp, uint32_t mall_sel, bool c_cursor) 60{ 61 struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp); 62 63 // Also cache cursor in MALL if using MALL for SS 64 REG_UPDATE_2(DCHUBP_MALL_CONFIG, USE_MALL_SEL, mall_sel, 65 USE_MALL_FOR_CURSOR, c_cursor); 66} 67 68void hubp32_prepare_subvp_buffering(struct hubp *hubp, bool enable) 69{ 70 struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp); 71 REG_UPDATE(DCHUBP_VMPG_CONFIG, FORCE_ONE_ROW_FOR_FRAME, enable); 72 73 /* Programming guide suggests CURSOR_REQ_MODE = 1 for SubVP: 74 * For Pstate change using the MALL with sub-viewport buffering, 75 * the cursor does not use the MALL (USE_MALL_FOR_CURSOR is ignored) 76 * and sub-viewport positioning by Display FW has to avoid the cursor 77 * requests to DRAM (set CURSOR_REQ_MODE = 1 to minimize this exclusion). 78 * 79 * CURSOR_REQ_MODE = 1 begins fetching cursor data at the beginning of display prefetch. 80 * Setting this should allow the sub-viewport position to always avoid the cursor because 81 * we do not allow the sub-viewport region to overlap with display prefetch (i.e. during blank). 82 */ 83 REG_UPDATE(CURSOR_CONTROL, CURSOR_REQ_MODE, enable); 84} 85 86void hubp32_phantom_hubp_post_enable(struct hubp *hubp) 87{ 88 uint32_t reg_val; 89 struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp); 90 91 /* For phantom pipe enable, disable GSL */ 92 REG_UPDATE(DCSURF_FLIP_CONTROL2, SURFACE_GSL_ENABLE, 0); 93 REG_UPDATE(DCHUBP_CNTL, HUBP_BLANK_EN, 1); 94 reg_val = REG_READ(DCHUBP_CNTL); 95 if (reg_val) { 96 /* init sequence workaround: in case HUBP is 97 * power gated, this wait would timeout. 98 * 99 * we just wrote reg_val to non-0, if it stay 0 100 * it means HUBP is gated 101 */ 102 REG_WAIT(DCHUBP_CNTL, 103 HUBP_NO_OUTSTANDING_REQ, 1, 104 1, 200); 105 } 106} 107 108void hubp32_cursor_set_attributes( 109 struct hubp *hubp, 110 const struct dc_cursor_attributes *attr) 111{ 112 struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp); 113 enum cursor_pitch hw_pitch = hubp1_get_cursor_pitch(attr->pitch); 114 enum cursor_lines_per_chunk lpc = hubp2_get_lines_per_chunk( 115 attr->width, attr->color_format); 116 117 //Round cursor width up to next multiple of 64 118 uint32_t cursor_width = ((attr->width + 63) / 64) * 64; 119 uint32_t cursor_height = attr->height; 120 uint32_t cursor_size = cursor_width * cursor_height; 121 122 hubp->curs_attr = *attr; 123 124 REG_UPDATE(CURSOR_SURFACE_ADDRESS_HIGH, 125 CURSOR_SURFACE_ADDRESS_HIGH, attr->address.high_part); 126 REG_UPDATE(CURSOR_SURFACE_ADDRESS, 127 CURSOR_SURFACE_ADDRESS, attr->address.low_part); 128 129 REG_UPDATE_2(CURSOR_SIZE, 130 CURSOR_WIDTH, attr->width, 131 CURSOR_HEIGHT, attr->height); 132 133 REG_UPDATE_4(CURSOR_CONTROL, 134 CURSOR_MODE, attr->color_format, 135 CURSOR_2X_MAGNIFY, attr->attribute_flags.bits.ENABLE_MAGNIFICATION, 136 CURSOR_PITCH, hw_pitch, 137 CURSOR_LINES_PER_CHUNK, lpc); 138 139 REG_SET_2(CURSOR_SETTINGS, 0, 140 /* no shift of the cursor HDL schedule */ 141 CURSOR0_DST_Y_OFFSET, 0, 142 /* used to shift the cursor chunk request deadline */ 143 CURSOR0_CHUNK_HDL_ADJUST, 3); 144 145 switch (attr->color_format) { 146 case CURSOR_MODE_MONO: 147 cursor_size /= 2; 148 break; 149 case CURSOR_MODE_COLOR_1BIT_AND: 150 case CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA: 151 case CURSOR_MODE_COLOR_UN_PRE_MULTIPLIED_ALPHA: 152 cursor_size *= 4; 153 break; 154 155 case CURSOR_MODE_COLOR_64BIT_FP_PRE_MULTIPLIED: 156 case CURSOR_MODE_COLOR_64BIT_FP_UN_PRE_MULTIPLIED: 157 default: 158 cursor_size *= 8; 159 break; 160 } 161 162 if (cursor_size > 16384) 163 REG_UPDATE(DCHUBP_MALL_CONFIG, USE_MALL_FOR_CURSOR, true); 164 else 165 REG_UPDATE(DCHUBP_MALL_CONFIG, USE_MALL_FOR_CURSOR, false); 166} 167void hubp32_init(struct hubp *hubp) 168{ 169 struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp); 170 REG_WRITE(HUBPREQ_DEBUG_DB, 1 << 8); 171} 172static struct hubp_funcs dcn32_hubp_funcs = { 173 .hubp_enable_tripleBuffer = hubp2_enable_triplebuffer, 174 .hubp_is_triplebuffer_enabled = hubp2_is_triplebuffer_enabled, 175 .hubp_program_surface_flip_and_addr = hubp3_program_surface_flip_and_addr, 176 .hubp_program_surface_config = hubp3_program_surface_config, 177 .hubp_is_flip_pending = hubp2_is_flip_pending, 178 .hubp_setup = hubp3_setup, 179 .hubp_setup_interdependent = hubp2_setup_interdependent, 180 .hubp_set_vm_system_aperture_settings = hubp3_set_vm_system_aperture_settings, 181 .set_blank = hubp2_set_blank, 182 .set_blank_regs = hubp2_set_blank_regs, 183 .dcc_control = hubp3_dcc_control, 184 .mem_program_viewport = min_set_viewport, 185 .set_cursor_attributes = hubp32_cursor_set_attributes, 186 .set_cursor_position = hubp2_cursor_set_position, 187 .hubp_clk_cntl = hubp2_clk_cntl, 188 .hubp_vtg_sel = hubp2_vtg_sel, 189 .dmdata_set_attributes = hubp3_dmdata_set_attributes, 190 .dmdata_load = hubp2_dmdata_load, 191 .dmdata_status_done = hubp2_dmdata_status_done, 192 .hubp_read_state = hubp3_read_state, 193 .hubp_clear_underflow = hubp2_clear_underflow, 194 .hubp_set_flip_control_surface_gsl = hubp2_set_flip_control_surface_gsl, 195 .hubp_init = hubp3_init, 196 .set_unbounded_requesting = hubp31_set_unbounded_requesting, 197 .hubp_soft_reset = hubp31_soft_reset, 198 .hubp_set_flip_int = hubp1_set_flip_int, 199 .hubp_in_blank = hubp1_in_blank, 200 .hubp_update_force_pstate_disallow = hubp32_update_force_pstate_disallow, 201 .hubp_update_force_cursor_pstate_disallow = hubp32_update_force_cursor_pstate_disallow, 202 .phantom_hubp_post_enable = hubp32_phantom_hubp_post_enable, 203 .hubp_update_mall_sel = hubp32_update_mall_sel, 204 .hubp_prepare_subvp_buffering = hubp32_prepare_subvp_buffering 205}; 206 207bool hubp32_construct( 208 struct dcn20_hubp *hubp2, 209 struct dc_context *ctx, 210 uint32_t inst, 211 const struct dcn_hubp2_registers *hubp_regs, 212 const struct dcn_hubp2_shift *hubp_shift, 213 const struct dcn_hubp2_mask *hubp_mask) 214{ 215 hubp2->base.funcs = &dcn32_hubp_funcs; 216 hubp2->base.ctx = ctx; 217 hubp2->hubp_regs = hubp_regs; 218 hubp2->hubp_shift = hubp_shift; 219 hubp2->hubp_mask = hubp_mask; 220 hubp2->base.inst = inst; 221 hubp2->base.opp_id = OPP_ID_INVALID; 222 hubp2->base.mpcc_id = 0xf; 223 224 return true; 225} 226