1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig EXTCON
3	tristate "External Connector Class (extcon) support"
4	help
5	  Say Y here to enable external connector class (extcon) support.
6	  This allows monitoring external connectors by userspace
7	  via sysfs and uevent and supports external connectors with
8	  multiple states; i.e., an extcon that may have multiple
9	  cables attached. For example, an external connector of a device
10	  may be used to connect an HDMI cable and a AC adaptor, and to
11	  host USB ports. Many of 30-pin connectors including PDMI are
12	  also good examples.
13
14if EXTCON
15
16comment "Extcon Device Drivers"
17
18config EXTCON_ADC_JACK
19	tristate "ADC Jack extcon support"
20	depends on IIO
21	help
22	  Say Y here to enable extcon device driver based on ADC values.
23
24config EXTCON_AXP288
25	tristate "X-Power AXP288 EXTCON support"
26	depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI && IOSF_MBI
27	select USB_ROLE_SWITCH
28	help
29	  Say Y here to enable support for USB peripheral detection
30	  and USB MUX switching by X-Power AXP288 PMIC.
31
32config EXTCON_FSA9480
33	tristate "FSA9480 EXTCON Support"
34	depends on INPUT && I2C
35	select IRQ_DOMAIN
36	select REGMAP_I2C
37	help
38	  If you say yes here you get support for the Fairchild Semiconductor
39	  FSA9480 microUSB switch and accessory detector chip. The FSA9480 is a USB
40	  port accessory detector and switch. The FSA9480 is fully controlled using
41	  I2C and enables USB data, stereo and mono audio, video, microphone
42	  and UART data to use a common connector port.
43
44config EXTCON_GPIO
45	tristate "GPIO extcon support"
46	depends on GPIOLIB || COMPILE_TEST
47	help
48	  Say Y here to enable GPIO based extcon support. Note that GPIO
49	  extcon supports single state per extcon instance.
50
51config EXTCON_INTEL_INT3496
52	tristate "Intel INT3496 ACPI device extcon driver"
53	depends on GPIOLIB && ACPI && (X86 || COMPILE_TEST)
54	help
55	  Say Y here to enable extcon support for USB OTG ports controlled by
56	  an Intel INT3496 ACPI device.
57
58	  This ACPI device is typically found on Intel Baytrail or Cherrytrail
59	  based tablets, or other Baytrail / Cherrytrail devices.
60
61config EXTCON_INTEL_CHT_WC
62	tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver"
63	depends on INTEL_SOC_PMIC_CHTWC
64	depends on USB_SUPPORT
65	depends on POWER_SUPPLY
66	select USB_ROLE_SWITCH
67	help
68	  Say Y here to enable extcon support for charger detection / control
69	  on the Intel Cherrytrail Whiskey Cove PMIC.
70
71config EXTCON_INTEL_MRFLD
72	tristate "Intel Merrifield Basin Cove PMIC extcon driver"
73	depends on INTEL_SOC_PMIC_MRFLD
74	help
75	  Say Y here to enable extcon support for charger detection / control
76	  on the Intel Merrifield Basin Cove PMIC.
77
78config EXTCON_MAX14577
79	tristate "Maxim MAX14577/77836 EXTCON Support"
80	depends on MFD_MAX14577
81	select IRQ_DOMAIN
82	select REGMAP_I2C
83	help
84	  If you say yes here you get support for the MUIC device of
85	  Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory
86	  detector and switch.
87
88config EXTCON_MAX3355
89	tristate "Maxim MAX3355 USB OTG EXTCON Support"
90	depends on GPIOLIB || COMPILE_TEST
91	help
92	  If you say yes here you get support for the USB OTG role detection by
93	  MAX3355. The MAX3355 chip integrates a charge pump and comparators to
94	  enable a system with an integrated USB OTG dual-role transceiver to
95	  function as an USB OTG dual-role device.
96
97config EXTCON_MAX77693
98	tristate "Maxim MAX77693 EXTCON Support"
99	depends on MFD_MAX77693 && INPUT
100	select IRQ_DOMAIN
101	select REGMAP_I2C
102	help
103	  If you say yes here you get support for the MUIC device of
104	  Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
105	  detector and switch.
106
107config EXTCON_MAX77843
108	tristate "Maxim MAX77843 EXTCON Support"
109	depends on MFD_MAX77843
110	select IRQ_DOMAIN
111	select REGMAP_I2C
112	help
113	  If you say yes here you get support for the MUIC device of
114	  Maxim MAX77843. The MAX77843 MUIC is a USB port accessory
115	  detector add switch.
116
117config EXTCON_MAX8997
118	tristate "Maxim MAX8997 EXTCON Support"
119	depends on MFD_MAX8997 && IRQ_DOMAIN
120	help
121	  If you say yes here you get support for the MUIC device of
122	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
123	  detector and switch.
124
125config EXTCON_PALMAS
126	tristate "Palmas USB EXTCON support"
127	depends on MFD_PALMAS
128	help
129	  Say Y here to enable support for USB peripheral and USB host
130	  detection by palmas usb.
131
132config EXTCON_PTN5150
133	tristate "NXP PTN5150 CC LOGIC USB EXTCON support"
134	depends on I2C && (GPIOLIB || COMPILE_TEST)
135	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
136	select REGMAP_I2C
137	help
138	  Say Y here to enable support for USB peripheral and USB host
139	  detection by NXP PTN5150 CC (Configuration Channel) logic chip.
140
141config EXTCON_QCOM_SPMI_MISC
142	tristate "Qualcomm USB extcon support"
143	depends on ARCH_QCOM || COMPILE_TEST
144	help
145	  Say Y here to enable SPMI PMIC based USB cable detection
146	  support on Qualcomm PMICs such as PM8941.
147
148config EXTCON_RT8973A
149	tristate "Richtek RT8973A EXTCON support"
150	depends on I2C
151	select IRQ_DOMAIN
152	select REGMAP_I2C
153	select REGMAP_IRQ
154	help
155	  If you say yes here you get support for the MUIC device of
156	  Richtek RT8973A. The RT8973A is a USB port accessory detector
157	  and switch that is optimized to protect low voltage system
158	  from abnormal high input voltage (up to 28V).
159
160config EXTCON_SM5502
161	tristate "Silicon Mitus SM5502/SM5504/SM5703 EXTCON support"
162	depends on I2C
163	select IRQ_DOMAIN
164	select REGMAP_I2C
165	select REGMAP_IRQ
166	help
167	  If you say yes here you get support for the MUIC device of
168	  Silicon Mitus SM5502. The SM5502 is a USB port accessory
169	  detector and switch.
170
171config EXTCON_USB_GPIO
172	tristate "USB GPIO extcon support"
173	depends on GPIOLIB || COMPILE_TEST
174	help
175	  Say Y here to enable GPIO based USB cable detection extcon support.
176	  Used typically if GPIO is used for USB ID pin detection.
177
178config EXTCON_USBC_CROS_EC
179	tristate "ChromeOS Embedded Controller EXTCON support"
180	depends on CROS_EC
181	help
182	  Say Y here to enable USB Type C cable detection extcon support when
183	  using Chrome OS EC based USB Type-C ports.
184
185config EXTCON_USBC_TUSB320
186	tristate "TI TUSB320 USB-C extcon support"
187	depends on I2C && TYPEC
188	select REGMAP_I2C
189	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
190	help
191	  Say Y here to enable support for USB Type C cable detection extcon
192	  support using a TUSB320.
193
194config EXTCON_RTK_TYPE_C
195	tristate "Realtek RTD SoC extcon Type-C Driver"
196	depends on ARCH_REALTEK || COMPILE_TEST
197	depends on TYPEC
198	select USB_COMMON
199	help
200	  Say Y here to enable extcon support for USB Type C cable detection
201	  when using the Realtek RTD SoC USB Type-C port.
202	  The DHC (Digital Home Hub) RTD series SoC contains a type c module.
203	  This driver will detect the status of the type-c port.
204
205endif
206