1// SPDX-License-Identifier: GPL-2.0+ 2// 3// Copyright (C) 2000-2001 Deep Blue Solutions 4// Copyright (C) 2002 Shane Nay (shane@minirl.com) 5// Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) 6// Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) 7// Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. 8 9#include <linux/err.h> 10#include <linux/interrupt.h> 11#include <linux/irq.h> 12#include <linux/clockchips.h> 13#include <linux/clk.h> 14#include <linux/of.h> 15#include <linux/of_address.h> 16#include <linux/of_irq.h> 17#include <linux/stmp_device.h> 18#include <linux/sched_clock.h> 19 20/* 21 * There are 2 versions of the timrot on Freescale MXS-based SoCs. 22 * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 23 * extends the counter to 32 bits. 24 * 25 * The implementation uses two timers, one for clock_event and 26 * another for clocksource. MX28 uses timrot 0 and 1, while MX23 27 * uses 0 and 2. 28 */ 29 30#define MX23_TIMROT_VERSION_OFFSET 0x0a0 31#define MX28_TIMROT_VERSION_OFFSET 0x120 32#define BP_TIMROT_MAJOR_VERSION 24 33#define BV_TIMROT_VERSION_1 0x01 34#define BV_TIMROT_VERSION_2 0x02 35#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) 36 37/* 38 * There are 4 registers for each timrotv2 instance, and 2 registers 39 * for each timrotv1. So address step 0x40 in macros below strides 40 * one instance of timrotv2 while two instances of timrotv1. 41 * 42 * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 43 * on MX28 while timrot2 on MX23. 44 */ 45/* common between v1 and v2 */ 46#define HW_TIMROT_ROTCTRL 0x00 47#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) 48/* v1 only */ 49#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) 50/* v2 only */ 51#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) 52#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) 53 54#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) 55#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) 56#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) 57#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) 58#define BP_TIMROT_TIMCTRLn_SELECT 0 59#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 60#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb 61#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf 62 63static struct clock_event_device mxs_clockevent_device; 64 65static void __iomem *mxs_timrot_base; 66static u32 timrot_major_version; 67 68static inline void timrot_irq_disable(void) 69{ 70 __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + 71 HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); 72} 73 74static inline void timrot_irq_enable(void) 75{ 76 __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + 77 HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET); 78} 79 80static void timrot_irq_acknowledge(void) 81{ 82 __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base + 83 HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); 84} 85 86static u64 timrotv1_get_cycles(struct clocksource *cs) 87{ 88 return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) 89 & 0xffff0000) >> 16); 90} 91 92static int timrotv1_set_next_event(unsigned long evt, 93 struct clock_event_device *dev) 94{ 95 /* timrot decrements the count */ 96 __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); 97 98 return 0; 99} 100 101static int timrotv2_set_next_event(unsigned long evt, 102 struct clock_event_device *dev) 103{ 104 /* timrot decrements the count */ 105 __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); 106 107 return 0; 108} 109 110static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) 111{ 112 struct clock_event_device *evt = dev_id; 113 114 timrot_irq_acknowledge(); 115 evt->event_handler(evt); 116 117 return IRQ_HANDLED; 118} 119 120static void mxs_irq_clear(char *state) 121{ 122 /* Disable interrupt in timer module */ 123 timrot_irq_disable(); 124 125 /* Set event time into the furthest future */ 126 if (timrot_is_v1()) 127 __raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); 128 else 129 __raw_writel(0xffffffff, 130 mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); 131 132 /* Clear pending interrupt */ 133 timrot_irq_acknowledge(); 134 pr_debug("%s: changing mode to %s\n", __func__, state); 135} 136 137static int mxs_shutdown(struct clock_event_device *evt) 138{ 139 mxs_irq_clear("shutdown"); 140 141 return 0; 142} 143 144static int mxs_set_oneshot(struct clock_event_device *evt) 145{ 146 if (clockevent_state_oneshot(evt)) 147 mxs_irq_clear("oneshot"); 148 timrot_irq_enable(); 149 return 0; 150} 151 152static struct clock_event_device mxs_clockevent_device = { 153 .name = "mxs_timrot", 154 .features = CLOCK_EVT_FEAT_ONESHOT, 155 .set_state_shutdown = mxs_shutdown, 156 .set_state_oneshot = mxs_set_oneshot, 157 .tick_resume = mxs_shutdown, 158 .set_next_event = timrotv2_set_next_event, 159 .rating = 200, 160}; 161 162static int __init mxs_clockevent_init(struct clk *timer_clk) 163{ 164 if (timrot_is_v1()) 165 mxs_clockevent_device.set_next_event = timrotv1_set_next_event; 166 mxs_clockevent_device.cpumask = cpumask_of(0); 167 clockevents_config_and_register(&mxs_clockevent_device, 168 clk_get_rate(timer_clk), 169 timrot_is_v1() ? 0xf : 0x2, 170 timrot_is_v1() ? 0xfffe : 0xfffffffe); 171 172 return 0; 173} 174 175static struct clocksource clocksource_mxs = { 176 .name = "mxs_timer", 177 .rating = 200, 178 .read = timrotv1_get_cycles, 179 .mask = CLOCKSOURCE_MASK(16), 180 .flags = CLOCK_SOURCE_IS_CONTINUOUS, 181}; 182 183static u64 notrace mxs_read_sched_clock_v2(void) 184{ 185 return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); 186} 187 188static int __init mxs_clocksource_init(struct clk *timer_clk) 189{ 190 unsigned int c = clk_get_rate(timer_clk); 191 192 if (timrot_is_v1()) 193 clocksource_register_hz(&clocksource_mxs, c); 194 else { 195 clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), 196 "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); 197 sched_clock_register(mxs_read_sched_clock_v2, 32, c); 198 } 199 200 return 0; 201} 202 203static int __init mxs_timer_init(struct device_node *np) 204{ 205 struct clk *timer_clk; 206 int irq, ret; 207 208 mxs_timrot_base = of_iomap(np, 0); 209 WARN_ON(!mxs_timrot_base); 210 211 timer_clk = of_clk_get(np, 0); 212 if (IS_ERR(timer_clk)) { 213 pr_err("%s: failed to get clk\n", __func__); 214 return PTR_ERR(timer_clk); 215 } 216 217 ret = clk_prepare_enable(timer_clk); 218 if (ret) 219 return ret; 220 221 /* 222 * Initialize timers to a known state 223 */ 224 stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); 225 226 /* get timrot version */ 227 timrot_major_version = __raw_readl(mxs_timrot_base + 228 (of_device_is_compatible(np, "fsl,imx23-timrot") ? 229 MX23_TIMROT_VERSION_OFFSET : 230 MX28_TIMROT_VERSION_OFFSET)); 231 timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; 232 233 /* one for clock_event */ 234 __raw_writel((timrot_is_v1() ? 235 BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : 236 BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | 237 BM_TIMROT_TIMCTRLn_UPDATE | 238 BM_TIMROT_TIMCTRLn_IRQ_EN, 239 mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); 240 241 /* another for clocksource */ 242 __raw_writel((timrot_is_v1() ? 243 BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : 244 BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | 245 BM_TIMROT_TIMCTRLn_RELOAD, 246 mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); 247 248 /* set clocksource timer fixed count to the maximum */ 249 if (timrot_is_v1()) 250 __raw_writel(0xffff, 251 mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); 252 else 253 __raw_writel(0xffffffff, 254 mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); 255 256 /* init and register the timer to the framework */ 257 ret = mxs_clocksource_init(timer_clk); 258 if (ret) 259 return ret; 260 261 ret = mxs_clockevent_init(timer_clk); 262 if (ret) 263 return ret; 264 265 /* Make irqs happen */ 266 irq = irq_of_parse_and_map(np, 0); 267 if (irq <= 0) 268 return -EINVAL; 269 270 return request_irq(irq, mxs_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, 271 "MXS Timer Tick", &mxs_clockevent_device); 272} 273TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init); 274