1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Clock implementation for VIA/Wondermedia SoC's 4 * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> 5 */ 6 7#include <linux/io.h> 8#include <linux/of.h> 9#include <linux/of_address.h> 10#include <linux/slab.h> 11#include <linux/bitops.h> 12#include <linux/clkdev.h> 13#include <linux/clk-provider.h> 14 15#define LEGACY_PMC_BASE 0xD8130000 16 17/* All clocks share the same lock as none can be changed concurrently */ 18static DEFINE_SPINLOCK(_lock); 19 20struct clk_device { 21 struct clk_hw hw; 22 void __iomem *div_reg; 23 unsigned int div_mask; 24 void __iomem *en_reg; 25 int en_bit; 26 spinlock_t *lock; 27}; 28 29/* 30 * Add new PLL_TYPE_x definitions here as required. Use the first known model 31 * to support the new type as the name. 32 * Add case statements to vtwm_pll_recalc_rate(), vtwm_pll_round_round() and 33 * vtwm_pll_set_rate() to handle the new PLL_TYPE_x 34 */ 35 36#define PLL_TYPE_VT8500 0 37#define PLL_TYPE_WM8650 1 38#define PLL_TYPE_WM8750 2 39#define PLL_TYPE_WM8850 3 40 41struct clk_pll { 42 struct clk_hw hw; 43 void __iomem *reg; 44 spinlock_t *lock; 45 int type; 46}; 47 48static void __iomem *pmc_base; 49 50static __init void vtwm_set_pmc_base(void) 51{ 52 struct device_node *np = 53 of_find_compatible_node(NULL, NULL, "via,vt8500-pmc"); 54 55 if (np) 56 pmc_base = of_iomap(np, 0); 57 else 58 pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000); 59 of_node_put(np); 60 61 if (!pmc_base) 62 pr_err("%s:of_iomap(pmc) failed\n", __func__); 63} 64 65#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw) 66 67#define VT8500_PMC_BUSY_MASK 0x18 68 69static void vt8500_pmc_wait_busy(void) 70{ 71 while (readl(pmc_base) & VT8500_PMC_BUSY_MASK) 72 cpu_relax(); 73} 74 75static int vt8500_dclk_enable(struct clk_hw *hw) 76{ 77 struct clk_device *cdev = to_clk_device(hw); 78 u32 en_val; 79 unsigned long flags = 0; 80 81 spin_lock_irqsave(cdev->lock, flags); 82 83 en_val = readl(cdev->en_reg); 84 en_val |= BIT(cdev->en_bit); 85 writel(en_val, cdev->en_reg); 86 87 spin_unlock_irqrestore(cdev->lock, flags); 88 return 0; 89} 90 91static void vt8500_dclk_disable(struct clk_hw *hw) 92{ 93 struct clk_device *cdev = to_clk_device(hw); 94 u32 en_val; 95 unsigned long flags = 0; 96 97 spin_lock_irqsave(cdev->lock, flags); 98 99 en_val = readl(cdev->en_reg); 100 en_val &= ~BIT(cdev->en_bit); 101 writel(en_val, cdev->en_reg); 102 103 spin_unlock_irqrestore(cdev->lock, flags); 104} 105 106static int vt8500_dclk_is_enabled(struct clk_hw *hw) 107{ 108 struct clk_device *cdev = to_clk_device(hw); 109 u32 en_val = (readl(cdev->en_reg) & BIT(cdev->en_bit)); 110 111 return en_val ? 1 : 0; 112} 113 114static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw, 115 unsigned long parent_rate) 116{ 117 struct clk_device *cdev = to_clk_device(hw); 118 u32 div = readl(cdev->div_reg) & cdev->div_mask; 119 120 /* Special case for SDMMC devices */ 121 if ((cdev->div_mask == 0x3F) && (div & BIT(5))) 122 div = 64 * (div & 0x1f); 123 124 /* div == 0 is actually the highest divisor */ 125 if (div == 0) 126 div = (cdev->div_mask + 1); 127 128 return parent_rate / div; 129} 130 131static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate, 132 unsigned long *prate) 133{ 134 struct clk_device *cdev = to_clk_device(hw); 135 u32 divisor; 136 137 if (rate == 0) 138 return 0; 139 140 divisor = *prate / rate; 141 142 /* If prate / rate would be decimal, incr the divisor */ 143 if (rate * divisor < *prate) 144 divisor++; 145 146 /* 147 * If this is a request for SDMMC we have to adjust the divisor 148 * when >31 to use the fixed predivisor 149 */ 150 if ((cdev->div_mask == 0x3F) && (divisor > 31)) { 151 divisor = 64 * ((divisor / 64) + 1); 152 } 153 154 return *prate / divisor; 155} 156 157static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, 158 unsigned long parent_rate) 159{ 160 struct clk_device *cdev = to_clk_device(hw); 161 u32 divisor; 162 unsigned long flags = 0; 163 164 if (rate == 0) 165 return 0; 166 167 divisor = parent_rate / rate; 168 169 if (divisor == cdev->div_mask + 1) 170 divisor = 0; 171 172 /* SDMMC mask may need to be corrected before testing if its valid */ 173 if ((cdev->div_mask == 0x3F) && (divisor > 31)) { 174 /* 175 * Bit 5 is a fixed /64 predivisor. If the requested divisor 176 * is >31 then correct for the fixed divisor being required. 177 */ 178 divisor = 0x20 + (divisor / 64); 179 } 180 181 if (divisor > cdev->div_mask) { 182 pr_err("%s: invalid divisor for clock\n", __func__); 183 return -EINVAL; 184 } 185 186 spin_lock_irqsave(cdev->lock, flags); 187 188 vt8500_pmc_wait_busy(); 189 writel(divisor, cdev->div_reg); 190 vt8500_pmc_wait_busy(); 191 192 spin_unlock_irqrestore(cdev->lock, flags); 193 194 return 0; 195} 196 197 198static const struct clk_ops vt8500_gated_clk_ops = { 199 .enable = vt8500_dclk_enable, 200 .disable = vt8500_dclk_disable, 201 .is_enabled = vt8500_dclk_is_enabled, 202}; 203 204static const struct clk_ops vt8500_divisor_clk_ops = { 205 .round_rate = vt8500_dclk_round_rate, 206 .set_rate = vt8500_dclk_set_rate, 207 .recalc_rate = vt8500_dclk_recalc_rate, 208}; 209 210static const struct clk_ops vt8500_gated_divisor_clk_ops = { 211 .enable = vt8500_dclk_enable, 212 .disable = vt8500_dclk_disable, 213 .is_enabled = vt8500_dclk_is_enabled, 214 .round_rate = vt8500_dclk_round_rate, 215 .set_rate = vt8500_dclk_set_rate, 216 .recalc_rate = vt8500_dclk_recalc_rate, 217}; 218 219#define CLK_INIT_GATED BIT(0) 220#define CLK_INIT_DIVISOR BIT(1) 221#define CLK_INIT_GATED_DIVISOR (CLK_INIT_DIVISOR | CLK_INIT_GATED) 222 223static __init void vtwm_device_clk_init(struct device_node *node) 224{ 225 u32 en_reg, div_reg; 226 struct clk_hw *hw; 227 struct clk_device *dev_clk; 228 const char *clk_name = node->name; 229 const char *parent_name; 230 struct clk_init_data init; 231 int rc; 232 int clk_init_flags = 0; 233 234 if (!pmc_base) 235 vtwm_set_pmc_base(); 236 237 dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL); 238 if (WARN_ON(!dev_clk)) 239 return; 240 241 dev_clk->lock = &_lock; 242 243 rc = of_property_read_u32(node, "enable-reg", &en_reg); 244 if (!rc) { 245 dev_clk->en_reg = pmc_base + en_reg; 246 rc = of_property_read_u32(node, "enable-bit", &dev_clk->en_bit); 247 if (rc) { 248 pr_err("%s: enable-bit property required for gated clock\n", 249 __func__); 250 return; 251 } 252 clk_init_flags |= CLK_INIT_GATED; 253 } 254 255 rc = of_property_read_u32(node, "divisor-reg", &div_reg); 256 if (!rc) { 257 dev_clk->div_reg = pmc_base + div_reg; 258 /* 259 * use 0x1f as the default mask since it covers 260 * almost all the clocks and reduces dts properties 261 */ 262 dev_clk->div_mask = 0x1f; 263 264 of_property_read_u32(node, "divisor-mask", &dev_clk->div_mask); 265 clk_init_flags |= CLK_INIT_DIVISOR; 266 } 267 268 of_property_read_string(node, "clock-output-names", &clk_name); 269 270 switch (clk_init_flags) { 271 case CLK_INIT_GATED: 272 init.ops = &vt8500_gated_clk_ops; 273 break; 274 case CLK_INIT_DIVISOR: 275 init.ops = &vt8500_divisor_clk_ops; 276 break; 277 case CLK_INIT_GATED_DIVISOR: 278 init.ops = &vt8500_gated_divisor_clk_ops; 279 break; 280 default: 281 pr_err("%s: Invalid clock description in device tree\n", 282 __func__); 283 kfree(dev_clk); 284 return; 285 } 286 287 init.name = clk_name; 288 init.flags = 0; 289 parent_name = of_clk_get_parent_name(node, 0); 290 init.parent_names = &parent_name; 291 init.num_parents = 1; 292 293 dev_clk->hw.init = &init; 294 295 hw = &dev_clk->hw; 296 rc = clk_hw_register(NULL, hw); 297 if (WARN_ON(rc)) { 298 kfree(dev_clk); 299 return; 300 } 301 rc = of_clk_add_hw_provider(node, of_clk_hw_simple_get, hw); 302 clk_hw_register_clkdev(hw, clk_name, NULL); 303} 304CLK_OF_DECLARE(vt8500_device, "via,vt8500-device-clock", vtwm_device_clk_init); 305 306/* PLL clock related functions */ 307 308#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) 309 310/* Helper macros for PLL_VT8500 */ 311#define VT8500_PLL_MUL(x) ((x & 0x1F) << 1) 312#define VT8500_PLL_DIV(x) ((x & 0x100) ? 1 : 2) 313 314#define VT8500_BITS_TO_FREQ(r, m, d) \ 315 ((r / d) * m) 316 317#define VT8500_BITS_TO_VAL(m, d) \ 318 ((d == 2 ? 0 : 0x100) | ((m >> 1) & 0x1F)) 319 320/* Helper macros for PLL_WM8650 */ 321#define WM8650_PLL_MUL(x) (x & 0x3FF) 322#define WM8650_PLL_DIV(x) (((x >> 10) & 7) * (1 << ((x >> 13) & 3))) 323 324#define WM8650_BITS_TO_FREQ(r, m, d1, d2) \ 325 (r * m / (d1 * (1 << d2))) 326 327#define WM8650_BITS_TO_VAL(m, d1, d2) \ 328 ((d2 << 13) | (d1 << 10) | (m & 0x3FF)) 329 330/* Helper macros for PLL_WM8750 */ 331#define WM8750_PLL_MUL(x) (((x >> 16) & 0xFF) + 1) 332#define WM8750_PLL_DIV(x) ((((x >> 8) & 1) + 1) * (1 << (x & 7))) 333 334#define WM8750_BITS_TO_FREQ(r, m, d1, d2) \ 335 (r * (m+1) / ((d1+1) * (1 << d2))) 336 337#define WM8750_BITS_TO_VAL(f, m, d1, d2) \ 338 ((f << 24) | ((m - 1) << 16) | ((d1 - 1) << 8) | d2) 339 340/* Helper macros for PLL_WM8850 */ 341#define WM8850_PLL_MUL(x) ((((x >> 16) & 0x7F) + 1) * 2) 342#define WM8850_PLL_DIV(x) ((((x >> 8) & 1) + 1) * (1 << (x & 3))) 343 344#define WM8850_BITS_TO_FREQ(r, m, d1, d2) \ 345 (r * ((m + 1) * 2) / ((d1+1) * (1 << d2))) 346 347#define WM8850_BITS_TO_VAL(m, d1, d2) \ 348 ((((m / 2) - 1) << 16) | ((d1 - 1) << 8) | d2) 349 350static int vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate, 351 u32 *multiplier, u32 *prediv) 352{ 353 unsigned long tclk; 354 355 /* sanity check */ 356 if ((rate < parent_rate * 4) || (rate > parent_rate * 62)) { 357 pr_err("%s: requested rate out of range\n", __func__); 358 *multiplier = 0; 359 *prediv = 1; 360 return -EINVAL; 361 } 362 if (rate <= parent_rate * 31) 363 /* use the prediv to double the resolution */ 364 *prediv = 2; 365 else 366 *prediv = 1; 367 368 *multiplier = rate / (parent_rate / *prediv); 369 tclk = (parent_rate / *prediv) * *multiplier; 370 371 if (tclk != rate) 372 pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, 373 rate, tclk); 374 375 return 0; 376} 377 378/* 379 * M * parent [O1] => / P [O2] => / D [O3] 380 * Where O1 is 900MHz...3GHz; 381 * O2 is 600MHz >= (M * parent) / P >= 300MHz; 382 * M is 36...120 [25MHz parent]; D is 1 or 2 or 4 or 8. 383 * Possible ranges (O3): 384 * D = 8: 37,5MHz...75MHz 385 * D = 4: 75MHz...150MHz 386 * D = 2: 150MHz...300MHz 387 * D = 1: 300MHz...600MHz 388 */ 389static int wm8650_find_pll_bits(unsigned long rate, 390 unsigned long parent_rate, u32 *multiplier, u32 *divisor1, 391 u32 *divisor2) 392{ 393 unsigned long O1, min_err, rate_err; 394 395 if (!parent_rate || (rate < 37500000) || (rate > 600000000)) 396 return -EINVAL; 397 398 *divisor2 = rate <= 75000000 ? 3 : rate <= 150000000 ? 2 : 399 rate <= 300000000 ? 1 : 0; 400 /* 401 * Divisor P cannot be calculated. Test all divisors and find where M 402 * will be as close as possible to the requested rate. 403 */ 404 min_err = ULONG_MAX; 405 for (*divisor1 = 5; *divisor1 >= 3; (*divisor1)--) { 406 O1 = rate * *divisor1 * (1 << (*divisor2)); 407 rate_err = O1 % parent_rate; 408 if (rate_err < min_err) { 409 *multiplier = O1 / parent_rate; 410 if (rate_err == 0) 411 return 0; 412 413 min_err = rate_err; 414 } 415 } 416 417 if ((*multiplier < 3) || (*multiplier > 1023)) 418 return -EINVAL; 419 420 pr_warn("%s: rate error is %lu\n", __func__, min_err); 421 422 return 0; 423} 424 425static u32 wm8750_get_filter(u32 parent_rate, u32 divisor1) 426{ 427 /* calculate frequency (MHz) after pre-divisor */ 428 u32 freq = (parent_rate / 1000000) / (divisor1 + 1); 429 430 if ((freq < 10) || (freq > 200)) 431 pr_warn("%s: PLL recommended input frequency 10..200Mhz (requested %d Mhz)\n", 432 __func__, freq); 433 434 if (freq >= 166) 435 return 7; 436 else if (freq >= 104) 437 return 6; 438 else if (freq >= 65) 439 return 5; 440 else if (freq >= 42) 441 return 4; 442 else if (freq >= 26) 443 return 3; 444 else if (freq >= 16) 445 return 2; 446 else if (freq >= 10) 447 return 1; 448 449 return 0; 450} 451 452static int wm8750_find_pll_bits(unsigned long rate, unsigned long parent_rate, 453 u32 *filter, u32 *multiplier, u32 *divisor1, u32 *divisor2) 454{ 455 u32 mul; 456 int div1, div2; 457 unsigned long tclk, rate_err, best_err; 458 459 best_err = (unsigned long)-1; 460 461 /* Find the closest match (lower or equal to requested) */ 462 for (div1 = 1; div1 >= 0; div1--) 463 for (div2 = 7; div2 >= 0; div2--) 464 for (mul = 0; mul <= 255; mul++) { 465 tclk = parent_rate * (mul + 1) / ((div1 + 1) * (1 << div2)); 466 if (tclk > rate) 467 continue; 468 /* error will always be +ve */ 469 rate_err = rate - tclk; 470 if (rate_err == 0) { 471 *filter = wm8750_get_filter(parent_rate, div1); 472 *multiplier = mul; 473 *divisor1 = div1; 474 *divisor2 = div2; 475 return 0; 476 } 477 478 if (rate_err < best_err) { 479 best_err = rate_err; 480 *multiplier = mul; 481 *divisor1 = div1; 482 *divisor2 = div2; 483 } 484 } 485 486 if (best_err == (unsigned long)-1) { 487 pr_warn("%s: impossible rate %lu\n", __func__, rate); 488 return -EINVAL; 489 } 490 491 /* if we got here, it wasn't an exact match */ 492 pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate, 493 rate - best_err); 494 495 *filter = wm8750_get_filter(parent_rate, *divisor1); 496 497 return 0; 498} 499 500static int wm8850_find_pll_bits(unsigned long rate, unsigned long parent_rate, 501 u32 *multiplier, u32 *divisor1, u32 *divisor2) 502{ 503 u32 mul; 504 int div1, div2; 505 unsigned long tclk, rate_err, best_err; 506 507 best_err = (unsigned long)-1; 508 509 /* Find the closest match (lower or equal to requested) */ 510 for (div1 = 1; div1 >= 0; div1--) 511 for (div2 = 3; div2 >= 0; div2--) 512 for (mul = 0; mul <= 127; mul++) { 513 tclk = parent_rate * ((mul + 1) * 2) / 514 ((div1 + 1) * (1 << div2)); 515 if (tclk > rate) 516 continue; 517 /* error will always be +ve */ 518 rate_err = rate - tclk; 519 if (rate_err == 0) { 520 *multiplier = mul; 521 *divisor1 = div1; 522 *divisor2 = div2; 523 return 0; 524 } 525 526 if (rate_err < best_err) { 527 best_err = rate_err; 528 *multiplier = mul; 529 *divisor1 = div1; 530 *divisor2 = div2; 531 } 532 } 533 534 if (best_err == (unsigned long)-1) { 535 pr_warn("%s: impossible rate %lu\n", __func__, rate); 536 return -EINVAL; 537 } 538 539 /* if we got here, it wasn't an exact match */ 540 pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate, 541 rate - best_err); 542 543 return 0; 544} 545 546static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate, 547 unsigned long parent_rate) 548{ 549 struct clk_pll *pll = to_clk_pll(hw); 550 u32 filter, mul, div1, div2; 551 u32 pll_val; 552 unsigned long flags = 0; 553 int ret; 554 555 /* sanity check */ 556 557 switch (pll->type) { 558 case PLL_TYPE_VT8500: 559 ret = vt8500_find_pll_bits(rate, parent_rate, &mul, &div1); 560 if (!ret) 561 pll_val = VT8500_BITS_TO_VAL(mul, div1); 562 break; 563 case PLL_TYPE_WM8650: 564 ret = wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2); 565 if (!ret) 566 pll_val = WM8650_BITS_TO_VAL(mul, div1, div2); 567 break; 568 case PLL_TYPE_WM8750: 569 ret = wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1, &div2); 570 if (!ret) 571 pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2); 572 break; 573 case PLL_TYPE_WM8850: 574 ret = wm8850_find_pll_bits(rate, parent_rate, &mul, &div1, &div2); 575 if (!ret) 576 pll_val = WM8850_BITS_TO_VAL(mul, div1, div2); 577 break; 578 default: 579 pr_err("%s: invalid pll type\n", __func__); 580 ret = -EINVAL; 581 } 582 583 if (ret) 584 return ret; 585 586 spin_lock_irqsave(pll->lock, flags); 587 588 vt8500_pmc_wait_busy(); 589 writel(pll_val, pll->reg); 590 vt8500_pmc_wait_busy(); 591 592 spin_unlock_irqrestore(pll->lock, flags); 593 594 return 0; 595} 596 597static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate, 598 unsigned long *prate) 599{ 600 struct clk_pll *pll = to_clk_pll(hw); 601 u32 filter, mul, div1, div2; 602 long round_rate; 603 int ret; 604 605 switch (pll->type) { 606 case PLL_TYPE_VT8500: 607 ret = vt8500_find_pll_bits(rate, *prate, &mul, &div1); 608 if (!ret) 609 round_rate = VT8500_BITS_TO_FREQ(*prate, mul, div1); 610 break; 611 case PLL_TYPE_WM8650: 612 ret = wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2); 613 if (!ret) 614 round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2); 615 break; 616 case PLL_TYPE_WM8750: 617 ret = wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2); 618 if (!ret) 619 round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2); 620 break; 621 case PLL_TYPE_WM8850: 622 ret = wm8850_find_pll_bits(rate, *prate, &mul, &div1, &div2); 623 if (!ret) 624 round_rate = WM8850_BITS_TO_FREQ(*prate, mul, div1, div2); 625 break; 626 default: 627 ret = -EINVAL; 628 } 629 630 if (ret) 631 return ret; 632 633 return round_rate; 634} 635 636static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw, 637 unsigned long parent_rate) 638{ 639 struct clk_pll *pll = to_clk_pll(hw); 640 u32 pll_val = readl(pll->reg); 641 unsigned long pll_freq; 642 643 switch (pll->type) { 644 case PLL_TYPE_VT8500: 645 pll_freq = parent_rate * VT8500_PLL_MUL(pll_val); 646 pll_freq /= VT8500_PLL_DIV(pll_val); 647 break; 648 case PLL_TYPE_WM8650: 649 pll_freq = parent_rate * WM8650_PLL_MUL(pll_val); 650 pll_freq /= WM8650_PLL_DIV(pll_val); 651 break; 652 case PLL_TYPE_WM8750: 653 pll_freq = parent_rate * WM8750_PLL_MUL(pll_val); 654 pll_freq /= WM8750_PLL_DIV(pll_val); 655 break; 656 case PLL_TYPE_WM8850: 657 pll_freq = parent_rate * WM8850_PLL_MUL(pll_val); 658 pll_freq /= WM8850_PLL_DIV(pll_val); 659 break; 660 default: 661 pll_freq = 0; 662 } 663 664 return pll_freq; 665} 666 667static const struct clk_ops vtwm_pll_ops = { 668 .round_rate = vtwm_pll_round_rate, 669 .set_rate = vtwm_pll_set_rate, 670 .recalc_rate = vtwm_pll_recalc_rate, 671}; 672 673static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type) 674{ 675 u32 reg; 676 struct clk_hw *hw; 677 struct clk_pll *pll_clk; 678 const char *clk_name = node->name; 679 const char *parent_name; 680 struct clk_init_data init; 681 int rc; 682 683 if (!pmc_base) 684 vtwm_set_pmc_base(); 685 686 rc = of_property_read_u32(node, "reg", ®); 687 if (WARN_ON(rc)) 688 return; 689 690 pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL); 691 if (WARN_ON(!pll_clk)) 692 return; 693 694 pll_clk->reg = pmc_base + reg; 695 pll_clk->lock = &_lock; 696 pll_clk->type = pll_type; 697 698 of_property_read_string(node, "clock-output-names", &clk_name); 699 700 init.name = clk_name; 701 init.ops = &vtwm_pll_ops; 702 init.flags = 0; 703 parent_name = of_clk_get_parent_name(node, 0); 704 init.parent_names = &parent_name; 705 init.num_parents = 1; 706 707 pll_clk->hw.init = &init; 708 709 hw = &pll_clk->hw; 710 rc = clk_hw_register(NULL, &pll_clk->hw); 711 if (WARN_ON(rc)) { 712 kfree(pll_clk); 713 return; 714 } 715 rc = of_clk_add_hw_provider(node, of_clk_hw_simple_get, hw); 716 clk_hw_register_clkdev(hw, clk_name, NULL); 717} 718 719 720/* Wrappers for initialization functions */ 721 722static void __init vt8500_pll_init(struct device_node *node) 723{ 724 vtwm_pll_clk_init(node, PLL_TYPE_VT8500); 725} 726CLK_OF_DECLARE(vt8500_pll, "via,vt8500-pll-clock", vt8500_pll_init); 727 728static void __init wm8650_pll_init(struct device_node *node) 729{ 730 vtwm_pll_clk_init(node, PLL_TYPE_WM8650); 731} 732CLK_OF_DECLARE(wm8650_pll, "wm,wm8650-pll-clock", wm8650_pll_init); 733 734static void __init wm8750_pll_init(struct device_node *node) 735{ 736 vtwm_pll_clk_init(node, PLL_TYPE_WM8750); 737} 738CLK_OF_DECLARE(wm8750_pll, "wm,wm8750-pll-clock", wm8750_pll_init); 739 740static void __init wm8850_pll_init(struct device_node *node) 741{ 742 vtwm_pll_clk_init(node, PLL_TYPE_WM8850); 743} 744CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init); 745