1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * ACPI support for Intel Lynxpoint LPSS. 4 * 5 * Copyright (C) 2013, Intel Corporation 6 * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> 7 * Rafael J. Wysocki <rafael.j.wysocki@intel.com> 8 */ 9 10#include <linux/acpi.h> 11#include <linux/clkdev.h> 12#include <linux/clk-provider.h> 13#include <linux/dmi.h> 14#include <linux/err.h> 15#include <linux/io.h> 16#include <linux/mutex.h> 17#include <linux/pci.h> 18#include <linux/platform_device.h> 19#include <linux/platform_data/x86/clk-lpss.h> 20#include <linux/platform_data/x86/pmc_atom.h> 21#include <linux/pm_domain.h> 22#include <linux/pm_runtime.h> 23#include <linux/pwm.h> 24#include <linux/pxa2xx_ssp.h> 25#include <linux/suspend.h> 26#include <linux/delay.h> 27 28#include "../internal.h" 29 30#ifdef CONFIG_X86_INTEL_LPSS 31 32#include <asm/cpu_device_id.h> 33#include <asm/intel-family.h> 34#include <asm/iosf_mbi.h> 35 36#define LPSS_ADDR(desc) ((unsigned long)&desc) 37 38#define LPSS_CLK_SIZE 0x04 39#define LPSS_LTR_SIZE 0x18 40 41/* Offsets relative to LPSS_PRIVATE_OFFSET */ 42#define LPSS_CLK_DIVIDER_DEF_MASK (BIT(1) | BIT(16)) 43#define LPSS_RESETS 0x04 44#define LPSS_RESETS_RESET_FUNC BIT(0) 45#define LPSS_RESETS_RESET_APB BIT(1) 46#define LPSS_GENERAL 0x08 47#define LPSS_GENERAL_LTR_MODE_SW BIT(2) 48#define LPSS_GENERAL_UART_RTS_OVRD BIT(3) 49#define LPSS_SW_LTR 0x10 50#define LPSS_AUTO_LTR 0x14 51#define LPSS_LTR_SNOOP_REQ BIT(15) 52#define LPSS_LTR_SNOOP_MASK 0x0000FFFF 53#define LPSS_LTR_SNOOP_LAT_1US 0x800 54#define LPSS_LTR_SNOOP_LAT_32US 0xC00 55#define LPSS_LTR_SNOOP_LAT_SHIFT 5 56#define LPSS_LTR_SNOOP_LAT_CUTOFF 3000 57#define LPSS_LTR_MAX_VAL 0x3FF 58#define LPSS_TX_INT 0x20 59#define LPSS_TX_INT_MASK BIT(1) 60 61#define LPSS_PRV_REG_COUNT 9 62 63/* LPSS Flags */ 64#define LPSS_CLK BIT(0) 65#define LPSS_CLK_GATE BIT(1) 66#define LPSS_CLK_DIVIDER BIT(2) 67#define LPSS_LTR BIT(3) 68#define LPSS_SAVE_CTX BIT(4) 69/* 70 * For some devices the DSDT AML code for another device turns off the device 71 * before our suspend handler runs, causing us to read/save all 1-s (0xffffffff) 72 * as ctx register values. 73 * Luckily these devices always use the same ctx register values, so we can 74 * work around this by saving the ctx registers once on activation. 75 */ 76#define LPSS_SAVE_CTX_ONCE BIT(5) 77#define LPSS_NO_D3_DELAY BIT(6) 78 79struct lpss_private_data; 80 81struct lpss_device_desc { 82 unsigned int flags; 83 const char *clk_con_id; 84 unsigned int prv_offset; 85 size_t prv_size_override; 86 const struct property_entry *properties; 87 void (*setup)(struct lpss_private_data *pdata); 88 bool resume_from_noirq; 89}; 90 91static const struct lpss_device_desc lpss_dma_desc = { 92 .flags = LPSS_CLK, 93}; 94 95struct lpss_private_data { 96 struct acpi_device *adev; 97 void __iomem *mmio_base; 98 resource_size_t mmio_size; 99 unsigned int fixed_clk_rate; 100 struct clk *clk; 101 const struct lpss_device_desc *dev_desc; 102 u32 prv_reg_ctx[LPSS_PRV_REG_COUNT]; 103}; 104 105/* Devices which need to be in D3 before lpss_iosf_enter_d3_state() proceeds */ 106static u32 pmc_atom_d3_mask = 0xfe000ffe; 107 108/* LPSS run time quirks */ 109static unsigned int lpss_quirks; 110 111/* 112 * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device. 113 * 114 * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover 115 * it can be powered off automatically whenever the last LPSS device goes down. 116 * In case of no power any access to the DMA controller will hang the system. 117 * The behaviour is reproduced on some HP laptops based on Intel BayTrail as 118 * well as on ASuS T100TA transformer. 119 * 120 * This quirk overrides power state of entire LPSS island to keep DMA powered 121 * on whenever we have at least one other device in use. 122 */ 123#define LPSS_QUIRK_ALWAYS_POWER_ON BIT(0) 124 125/* UART Component Parameter Register */ 126#define LPSS_UART_CPR 0xF4 127#define LPSS_UART_CPR_AFCE BIT(4) 128 129static void lpss_uart_setup(struct lpss_private_data *pdata) 130{ 131 unsigned int offset; 132 u32 val; 133 134 offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; 135 val = readl(pdata->mmio_base + offset); 136 writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset); 137 138 val = readl(pdata->mmio_base + LPSS_UART_CPR); 139 if (!(val & LPSS_UART_CPR_AFCE)) { 140 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL; 141 val = readl(pdata->mmio_base + offset); 142 val |= LPSS_GENERAL_UART_RTS_OVRD; 143 writel(val, pdata->mmio_base + offset); 144 } 145} 146 147static void lpss_deassert_reset(struct lpss_private_data *pdata) 148{ 149 unsigned int offset; 150 u32 val; 151 152 offset = pdata->dev_desc->prv_offset + LPSS_RESETS; 153 val = readl(pdata->mmio_base + offset); 154 val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC; 155 writel(val, pdata->mmio_base + offset); 156} 157 158/* 159 * BYT PWM used for backlight control by the i915 driver on systems without 160 * the Crystal Cove PMIC. 161 */ 162static struct pwm_lookup byt_pwm_lookup[] = { 163 PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0", 164 "pwm_soc_backlight", 0, PWM_POLARITY_NORMAL, 165 "pwm-lpss-platform"), 166}; 167 168static void byt_pwm_setup(struct lpss_private_data *pdata) 169{ 170 /* Only call pwm_add_table for the first PWM controller */ 171 if (acpi_dev_uid_match(pdata->adev, 1)) 172 pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup)); 173} 174 175#define LPSS_I2C_ENABLE 0x6c 176 177static void byt_i2c_setup(struct lpss_private_data *pdata) 178{ 179 acpi_handle handle = pdata->adev->handle; 180 unsigned long long shared_host = 0; 181 acpi_status status; 182 u64 uid; 183 184 /* Expected to always be successfull, but better safe then sorry */ 185 if (!acpi_dev_uid_to_integer(pdata->adev, &uid) && uid) { 186 /* Detect I2C bus shared with PUNIT and ignore its d3 status */ 187 status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host); 188 if (ACPI_SUCCESS(status) && shared_host) 189 pmc_atom_d3_mask &= ~(BIT_LPSS2_F1_I2C1 << (uid - 1)); 190 } 191 192 lpss_deassert_reset(pdata); 193 194 if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset)) 195 pdata->fixed_clk_rate = 133000000; 196 197 writel(0, pdata->mmio_base + LPSS_I2C_ENABLE); 198} 199 200/* 201 * BSW PWM1 is used for backlight control by the i915 driver 202 * BSW PWM2 is used for backlight control for fixed (etched into the glass) 203 * touch controls on some models. These touch-controls have specialized 204 * drivers which know they need the "pwm_soc_lpss_2" con-id. 205 */ 206static struct pwm_lookup bsw_pwm_lookup[] = { 207 PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0", 208 "pwm_soc_backlight", 0, PWM_POLARITY_NORMAL, 209 "pwm-lpss-platform"), 210 PWM_LOOKUP_WITH_MODULE("80862289:00", 0, NULL, 211 "pwm_soc_lpss_2", 0, PWM_POLARITY_NORMAL, 212 "pwm-lpss-platform"), 213}; 214 215static void bsw_pwm_setup(struct lpss_private_data *pdata) 216{ 217 /* Only call pwm_add_table for the first PWM controller */ 218 if (acpi_dev_uid_match(pdata->adev, 1)) 219 pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup)); 220} 221 222static const struct property_entry lpt_spi_properties[] = { 223 PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_LPT_SSP), 224 { } 225}; 226 227static const struct lpss_device_desc lpt_spi_dev_desc = { 228 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR 229 | LPSS_SAVE_CTX, 230 .prv_offset = 0x800, 231 .properties = lpt_spi_properties, 232}; 233 234static const struct lpss_device_desc lpt_i2c_dev_desc = { 235 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR | LPSS_SAVE_CTX, 236 .prv_offset = 0x800, 237}; 238 239static struct property_entry uart_properties[] = { 240 PROPERTY_ENTRY_U32("reg-io-width", 4), 241 PROPERTY_ENTRY_U32("reg-shift", 2), 242 PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"), 243 { }, 244}; 245 246static const struct lpss_device_desc lpt_uart_dev_desc = { 247 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR 248 | LPSS_SAVE_CTX, 249 .clk_con_id = "baudclk", 250 .prv_offset = 0x800, 251 .setup = lpss_uart_setup, 252 .properties = uart_properties, 253}; 254 255static const struct lpss_device_desc lpt_sdio_dev_desc = { 256 .flags = LPSS_LTR, 257 .prv_offset = 0x1000, 258 .prv_size_override = 0x1018, 259}; 260 261static const struct lpss_device_desc byt_pwm_dev_desc = { 262 .flags = LPSS_SAVE_CTX, 263 .prv_offset = 0x800, 264 .setup = byt_pwm_setup, 265}; 266 267static const struct lpss_device_desc bsw_pwm_dev_desc = { 268 .flags = LPSS_SAVE_CTX_ONCE | LPSS_NO_D3_DELAY, 269 .prv_offset = 0x800, 270 .setup = bsw_pwm_setup, 271 .resume_from_noirq = true, 272}; 273 274static const struct lpss_device_desc bsw_pwm2_dev_desc = { 275 .flags = LPSS_SAVE_CTX_ONCE | LPSS_NO_D3_DELAY, 276 .prv_offset = 0x800, 277 .resume_from_noirq = true, 278}; 279 280static const struct lpss_device_desc byt_uart_dev_desc = { 281 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, 282 .clk_con_id = "baudclk", 283 .prv_offset = 0x800, 284 .setup = lpss_uart_setup, 285 .properties = uart_properties, 286}; 287 288static const struct lpss_device_desc bsw_uart_dev_desc = { 289 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX 290 | LPSS_NO_D3_DELAY, 291 .clk_con_id = "baudclk", 292 .prv_offset = 0x800, 293 .setup = lpss_uart_setup, 294 .properties = uart_properties, 295}; 296 297static const struct property_entry byt_spi_properties[] = { 298 PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_BYT_SSP), 299 { } 300}; 301 302static const struct lpss_device_desc byt_spi_dev_desc = { 303 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, 304 .prv_offset = 0x400, 305 .properties = byt_spi_properties, 306}; 307 308static const struct lpss_device_desc byt_sdio_dev_desc = { 309 .flags = LPSS_CLK, 310}; 311 312static const struct lpss_device_desc byt_i2c_dev_desc = { 313 .flags = LPSS_CLK | LPSS_SAVE_CTX, 314 .prv_offset = 0x800, 315 .setup = byt_i2c_setup, 316 .resume_from_noirq = true, 317}; 318 319static const struct lpss_device_desc bsw_i2c_dev_desc = { 320 .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY, 321 .prv_offset = 0x800, 322 .setup = byt_i2c_setup, 323 .resume_from_noirq = true, 324}; 325 326static const struct property_entry bsw_spi_properties[] = { 327 PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_BSW_SSP), 328 PROPERTY_ENTRY_U32("num-cs", 2), 329 { } 330}; 331 332static const struct lpss_device_desc bsw_spi_dev_desc = { 333 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX 334 | LPSS_NO_D3_DELAY, 335 .prv_offset = 0x400, 336 .setup = lpss_deassert_reset, 337 .properties = bsw_spi_properties, 338}; 339 340static const struct x86_cpu_id lpss_cpu_ids[] = { 341 X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, NULL), 342 X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, NULL), 343 {} 344}; 345 346#else 347 348#define LPSS_ADDR(desc) (0UL) 349 350#endif /* CONFIG_X86_INTEL_LPSS */ 351 352static const struct acpi_device_id acpi_lpss_device_ids[] = { 353 /* Generic LPSS devices */ 354 { "INTL9C60", LPSS_ADDR(lpss_dma_desc) }, 355 356 /* Lynxpoint LPSS devices */ 357 { "INT33C0", LPSS_ADDR(lpt_spi_dev_desc) }, 358 { "INT33C1", LPSS_ADDR(lpt_spi_dev_desc) }, 359 { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) }, 360 { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) }, 361 { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) }, 362 { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) }, 363 { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) }, 364 365 /* BayTrail LPSS devices */ 366 { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) }, 367 { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) }, 368 { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) }, 369 { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) }, 370 { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) }, 371 372 /* Braswell LPSS devices */ 373 { "80862286", LPSS_ADDR(lpss_dma_desc) }, 374 { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) }, 375 { "80862289", LPSS_ADDR(bsw_pwm2_dev_desc) }, 376 { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) }, 377 { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) }, 378 { "808622C0", LPSS_ADDR(lpss_dma_desc) }, 379 { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) }, 380 381 /* Broadwell LPSS devices */ 382 { "INT3430", LPSS_ADDR(lpt_spi_dev_desc) }, 383 { "INT3431", LPSS_ADDR(lpt_spi_dev_desc) }, 384 { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) }, 385 { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) }, 386 { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) }, 387 { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) }, 388 { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) }, 389 390 /* Wildcat Point LPSS devices */ 391 { "INT3438", LPSS_ADDR(lpt_spi_dev_desc) }, 392 393 { } 394}; 395 396#ifdef CONFIG_X86_INTEL_LPSS 397 398/* LPSS main clock device. */ 399static struct platform_device *lpss_clk_dev; 400 401static inline void lpt_register_clock_device(void) 402{ 403 lpss_clk_dev = platform_device_register_simple("clk-lpss-atom", 404 PLATFORM_DEVID_NONE, 405 NULL, 0); 406} 407 408static int register_device_clock(struct acpi_device *adev, 409 struct lpss_private_data *pdata) 410{ 411 const struct lpss_device_desc *dev_desc = pdata->dev_desc; 412 const char *devname = dev_name(&adev->dev); 413 struct clk *clk; 414 struct lpss_clk_data *clk_data; 415 const char *parent, *clk_name; 416 void __iomem *prv_base; 417 418 if (!lpss_clk_dev) 419 lpt_register_clock_device(); 420 421 if (IS_ERR(lpss_clk_dev)) 422 return PTR_ERR(lpss_clk_dev); 423 424 clk_data = platform_get_drvdata(lpss_clk_dev); 425 if (!clk_data) 426 return -ENODEV; 427 clk = clk_data->clk; 428 429 if (!pdata->mmio_base 430 || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) 431 return -ENODATA; 432 433 parent = clk_data->name; 434 prv_base = pdata->mmio_base + dev_desc->prv_offset; 435 436 if (pdata->fixed_clk_rate) { 437 clk = clk_register_fixed_rate(NULL, devname, parent, 0, 438 pdata->fixed_clk_rate); 439 goto out; 440 } 441 442 if (dev_desc->flags & LPSS_CLK_GATE) { 443 clk = clk_register_gate(NULL, devname, parent, 0, 444 prv_base, 0, 0, NULL); 445 parent = devname; 446 } 447 448 if (dev_desc->flags & LPSS_CLK_DIVIDER) { 449 /* Prevent division by zero */ 450 if (!readl(prv_base)) 451 writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base); 452 453 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname); 454 if (!clk_name) 455 return -ENOMEM; 456 clk = clk_register_fractional_divider(NULL, clk_name, parent, 457 0, prv_base, 1, 15, 16, 15, 458 CLK_FRAC_DIVIDER_POWER_OF_TWO_PS, 459 NULL); 460 parent = clk_name; 461 462 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname); 463 if (!clk_name) { 464 kfree(parent); 465 return -ENOMEM; 466 } 467 clk = clk_register_gate(NULL, clk_name, parent, 468 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, 469 prv_base, 31, 0, NULL); 470 kfree(parent); 471 kfree(clk_name); 472 } 473out: 474 if (IS_ERR(clk)) 475 return PTR_ERR(clk); 476 477 pdata->clk = clk; 478 clk_register_clkdev(clk, dev_desc->clk_con_id, devname); 479 return 0; 480} 481 482struct lpss_device_links { 483 const char *supplier_hid; 484 const char *supplier_uid; 485 const char *consumer_hid; 486 const char *consumer_uid; 487 u32 flags; 488 const struct dmi_system_id *dep_missing_ids; 489}; 490 491/* Please keep this list sorted alphabetically by vendor and model */ 492static const struct dmi_system_id i2c1_dep_missing_dmi_ids[] = { 493 { 494 .matches = { 495 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), 496 DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"), 497 }, 498 }, 499 {} 500}; 501 502/* 503 * The _DEP method is used to identify dependencies but instead of creating 504 * device links for every handle in _DEP, only links in the following list are 505 * created. That is necessary because, in the general case, _DEP can refer to 506 * devices that might not have drivers, or that are on different buses, or where 507 * the supplier is not enumerated until after the consumer is probed. 508 */ 509static const struct lpss_device_links lpss_device_links[] = { 510 /* CHT External sdcard slot controller depends on PMIC I2C ctrl */ 511 {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME}, 512 /* CHT iGPU depends on PMIC I2C controller */ 513 {"808622C1", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME}, 514 /* BYT iGPU depends on the Embedded Controller I2C controller (UID 1) */ 515 {"80860F41", "1", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME, 516 i2c1_dep_missing_dmi_ids}, 517 /* BYT CR iGPU depends on PMIC I2C controller (UID 5 on CR) */ 518 {"80860F41", "5", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME}, 519 /* BYT iGPU depends on PMIC I2C controller (UID 7 on non CR) */ 520 {"80860F41", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME}, 521}; 522 523static bool acpi_lpss_is_supplier(struct acpi_device *adev, 524 const struct lpss_device_links *link) 525{ 526 return acpi_dev_hid_uid_match(adev, link->supplier_hid, link->supplier_uid); 527} 528 529static bool acpi_lpss_is_consumer(struct acpi_device *adev, 530 const struct lpss_device_links *link) 531{ 532 return acpi_dev_hid_uid_match(adev, link->consumer_hid, link->consumer_uid); 533} 534 535struct hid_uid { 536 const char *hid; 537 const char *uid; 538}; 539 540static int match_hid_uid(struct device *dev, const void *data) 541{ 542 struct acpi_device *adev = ACPI_COMPANION(dev); 543 const struct hid_uid *id = data; 544 545 if (!adev) 546 return 0; 547 548 return acpi_dev_hid_uid_match(adev, id->hid, id->uid); 549} 550 551static struct device *acpi_lpss_find_device(const char *hid, const char *uid) 552{ 553 struct device *dev; 554 555 struct hid_uid data = { 556 .hid = hid, 557 .uid = uid, 558 }; 559 560 dev = bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid); 561 if (dev) 562 return dev; 563 564 return bus_find_device(&pci_bus_type, NULL, &data, match_hid_uid); 565} 566 567static void acpi_lpss_link_consumer(struct device *dev1, 568 const struct lpss_device_links *link) 569{ 570 struct device *dev2; 571 572 dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid); 573 if (!dev2) 574 return; 575 576 if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids)) 577 || acpi_device_dep(ACPI_HANDLE(dev2), ACPI_HANDLE(dev1))) 578 device_link_add(dev2, dev1, link->flags); 579 580 put_device(dev2); 581} 582 583static void acpi_lpss_link_supplier(struct device *dev1, 584 const struct lpss_device_links *link) 585{ 586 struct device *dev2; 587 588 dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid); 589 if (!dev2) 590 return; 591 592 if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids)) 593 || acpi_device_dep(ACPI_HANDLE(dev1), ACPI_HANDLE(dev2))) 594 device_link_add(dev1, dev2, link->flags); 595 596 put_device(dev2); 597} 598 599static void acpi_lpss_create_device_links(struct acpi_device *adev, 600 struct platform_device *pdev) 601{ 602 int i; 603 604 for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) { 605 const struct lpss_device_links *link = &lpss_device_links[i]; 606 607 if (acpi_lpss_is_supplier(adev, link)) 608 acpi_lpss_link_consumer(&pdev->dev, link); 609 610 if (acpi_lpss_is_consumer(adev, link)) 611 acpi_lpss_link_supplier(&pdev->dev, link); 612 } 613} 614 615static int acpi_lpss_create_device(struct acpi_device *adev, 616 const struct acpi_device_id *id) 617{ 618 const struct lpss_device_desc *dev_desc; 619 struct lpss_private_data *pdata; 620 struct resource_entry *rentry; 621 struct list_head resource_list; 622 struct platform_device *pdev; 623 int ret; 624 625 dev_desc = (const struct lpss_device_desc *)id->driver_data; 626 if (!dev_desc) 627 return -EINVAL; 628 629 pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); 630 if (!pdata) 631 return -ENOMEM; 632 633 INIT_LIST_HEAD(&resource_list); 634 ret = acpi_dev_get_memory_resources(adev, &resource_list); 635 if (ret < 0) 636 goto err_out; 637 638 rentry = list_first_entry_or_null(&resource_list, struct resource_entry, node); 639 if (rentry) { 640 if (dev_desc->prv_size_override) 641 pdata->mmio_size = dev_desc->prv_size_override; 642 else 643 pdata->mmio_size = resource_size(rentry->res); 644 pdata->mmio_base = ioremap(rentry->res->start, pdata->mmio_size); 645 } 646 647 acpi_dev_free_resource_list(&resource_list); 648 649 if (!pdata->mmio_base) { 650 /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */ 651 adev->pnp.type.platform_id = 0; 652 goto out_free; 653 } 654 655 pdata->adev = adev; 656 pdata->dev_desc = dev_desc; 657 658 if (dev_desc->setup) 659 dev_desc->setup(pdata); 660 661 if (dev_desc->flags & LPSS_CLK) { 662 ret = register_device_clock(adev, pdata); 663 if (ret) 664 goto out_free; 665 } 666 667 /* 668 * This works around a known issue in ACPI tables where LPSS devices 669 * have _PS0 and _PS3 without _PSC (and no power resources), so 670 * acpi_bus_init_power() will assume that the BIOS has put them into D0. 671 */ 672 acpi_device_fix_up_power(adev); 673 674 adev->driver_data = pdata; 675 pdev = acpi_create_platform_device(adev, dev_desc->properties); 676 if (IS_ERR_OR_NULL(pdev)) { 677 adev->driver_data = NULL; 678 ret = PTR_ERR(pdev); 679 goto err_out; 680 } 681 682 acpi_lpss_create_device_links(adev, pdev); 683 return 1; 684 685out_free: 686 /* Skip the device, but continue the namespace scan */ 687 ret = 0; 688err_out: 689 kfree(pdata); 690 return ret; 691} 692 693static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg) 694{ 695 return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg); 696} 697 698static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata, 699 unsigned int reg) 700{ 701 writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg); 702} 703 704static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val) 705{ 706 struct acpi_device *adev = ACPI_COMPANION(dev); 707 struct lpss_private_data *pdata; 708 unsigned long flags; 709 int ret; 710 711 if (WARN_ON(!adev)) 712 return -ENODEV; 713 714 spin_lock_irqsave(&dev->power.lock, flags); 715 if (pm_runtime_suspended(dev)) { 716 ret = -EAGAIN; 717 goto out; 718 } 719 pdata = acpi_driver_data(adev); 720 if (WARN_ON(!pdata || !pdata->mmio_base)) { 721 ret = -ENODEV; 722 goto out; 723 } 724 *val = __lpss_reg_read(pdata, reg); 725 ret = 0; 726 727 out: 728 spin_unlock_irqrestore(&dev->power.lock, flags); 729 return ret; 730} 731 732static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr, 733 char *buf) 734{ 735 u32 ltr_value = 0; 736 unsigned int reg; 737 int ret; 738 739 reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR; 740 ret = lpss_reg_read(dev, reg, <r_value); 741 if (ret) 742 return ret; 743 744 return sysfs_emit(buf, "%08x\n", ltr_value); 745} 746 747static ssize_t lpss_ltr_mode_show(struct device *dev, 748 struct device_attribute *attr, char *buf) 749{ 750 u32 ltr_mode = 0; 751 char *outstr; 752 int ret; 753 754 ret = lpss_reg_read(dev, LPSS_GENERAL, <r_mode); 755 if (ret) 756 return ret; 757 758 outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto"; 759 return sprintf(buf, "%s\n", outstr); 760} 761 762static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL); 763static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL); 764static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL); 765 766static struct attribute *lpss_attrs[] = { 767 &dev_attr_auto_ltr.attr, 768 &dev_attr_sw_ltr.attr, 769 &dev_attr_ltr_mode.attr, 770 NULL, 771}; 772 773static const struct attribute_group lpss_attr_group = { 774 .attrs = lpss_attrs, 775 .name = "lpss_ltr", 776}; 777 778static void acpi_lpss_set_ltr(struct device *dev, s32 val) 779{ 780 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 781 u32 ltr_mode, ltr_val; 782 783 ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL); 784 if (val < 0) { 785 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) { 786 ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW; 787 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL); 788 } 789 return; 790 } 791 ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK; 792 if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) { 793 ltr_val |= LPSS_LTR_SNOOP_LAT_32US; 794 val = LPSS_LTR_MAX_VAL; 795 } else if (val > LPSS_LTR_MAX_VAL) { 796 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ; 797 val >>= LPSS_LTR_SNOOP_LAT_SHIFT; 798 } else { 799 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ; 800 } 801 ltr_val |= val; 802 __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR); 803 if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) { 804 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW; 805 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL); 806 } 807} 808 809#ifdef CONFIG_PM 810/** 811 * acpi_lpss_save_ctx() - Save the private registers of LPSS device 812 * @dev: LPSS device 813 * @pdata: pointer to the private data of the LPSS device 814 * 815 * Most LPSS devices have private registers which may loose their context when 816 * the device is powered down. acpi_lpss_save_ctx() saves those registers into 817 * prv_reg_ctx array. 818 */ 819static void acpi_lpss_save_ctx(struct device *dev, 820 struct lpss_private_data *pdata) 821{ 822 unsigned int i; 823 824 for (i = 0; i < LPSS_PRV_REG_COUNT; i++) { 825 unsigned long offset = i * sizeof(u32); 826 827 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset); 828 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n", 829 pdata->prv_reg_ctx[i], offset); 830 } 831} 832 833/** 834 * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device 835 * @dev: LPSS device 836 * @pdata: pointer to the private data of the LPSS device 837 * 838 * Restores the registers that were previously stored with acpi_lpss_save_ctx(). 839 */ 840static void acpi_lpss_restore_ctx(struct device *dev, 841 struct lpss_private_data *pdata) 842{ 843 unsigned int i; 844 845 for (i = 0; i < LPSS_PRV_REG_COUNT; i++) { 846 unsigned long offset = i * sizeof(u32); 847 848 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset); 849 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n", 850 pdata->prv_reg_ctx[i], offset); 851 } 852} 853 854static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata) 855{ 856 /* 857 * The following delay is needed or the subsequent write operations may 858 * fail. The LPSS devices are actually PCI devices and the PCI spec 859 * expects 10ms delay before the device can be accessed after D3 to D0 860 * transition. However some platforms like BSW does not need this delay. 861 */ 862 unsigned int delay = 10; /* default 10ms delay */ 863 864 if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY) 865 delay = 0; 866 867 msleep(delay); 868} 869 870static int acpi_lpss_activate(struct device *dev) 871{ 872 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 873 int ret; 874 875 ret = acpi_dev_resume(dev); 876 if (ret) 877 return ret; 878 879 acpi_lpss_d3_to_d0_delay(pdata); 880 881 /* 882 * This is called only on ->probe() stage where a device is either in 883 * known state defined by BIOS or most likely powered off. Due to this 884 * we have to deassert reset line to be sure that ->probe() will 885 * recognize the device. 886 */ 887 if (pdata->dev_desc->flags & (LPSS_SAVE_CTX | LPSS_SAVE_CTX_ONCE)) 888 lpss_deassert_reset(pdata); 889 890 if (pdata->dev_desc->flags & LPSS_SAVE_CTX_ONCE) 891 acpi_lpss_save_ctx(dev, pdata); 892 893 return 0; 894} 895 896static void acpi_lpss_dismiss(struct device *dev) 897{ 898 acpi_dev_suspend(dev, false); 899} 900 901/* IOSF SB for LPSS island */ 902#define LPSS_IOSF_UNIT_LPIOEP 0xA0 903#define LPSS_IOSF_UNIT_LPIO1 0xAB 904#define LPSS_IOSF_UNIT_LPIO2 0xAC 905 906#define LPSS_IOSF_PMCSR 0x84 907#define LPSS_PMCSR_D0 0 908#define LPSS_PMCSR_D3hot 3 909#define LPSS_PMCSR_Dx_MASK GENMASK(1, 0) 910 911#define LPSS_IOSF_GPIODEF0 0x154 912#define LPSS_GPIODEF0_DMA1_D3 BIT(2) 913#define LPSS_GPIODEF0_DMA2_D3 BIT(3) 914#define LPSS_GPIODEF0_DMA_D3_MASK GENMASK(3, 2) 915#define LPSS_GPIODEF0_DMA_LLP BIT(13) 916 917static DEFINE_MUTEX(lpss_iosf_mutex); 918static bool lpss_iosf_d3_entered = true; 919 920static void lpss_iosf_enter_d3_state(void) 921{ 922 u32 value1 = 0; 923 u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP; 924 u32 value2 = LPSS_PMCSR_D3hot; 925 u32 mask2 = LPSS_PMCSR_Dx_MASK; 926 /* 927 * PMC provides an information about actual status of the LPSS devices. 928 * Here we read the values related to LPSS power island, i.e. LPSS 929 * devices, excluding both LPSS DMA controllers, along with SCC domain. 930 */ 931 u32 func_dis, d3_sts_0, pmc_status; 932 int ret; 933 934 ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis); 935 if (ret) 936 return; 937 938 mutex_lock(&lpss_iosf_mutex); 939 940 ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0); 941 if (ret) 942 goto exit; 943 944 /* 945 * Get the status of entire LPSS power island per device basis. 946 * Shutdown both LPSS DMA controllers if and only if all other devices 947 * are already in D3hot. 948 */ 949 pmc_status = (~(d3_sts_0 | func_dis)) & pmc_atom_d3_mask; 950 if (pmc_status) 951 goto exit; 952 953 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE, 954 LPSS_IOSF_PMCSR, value2, mask2); 955 956 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE, 957 LPSS_IOSF_PMCSR, value2, mask2); 958 959 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE, 960 LPSS_IOSF_GPIODEF0, value1, mask1); 961 962 lpss_iosf_d3_entered = true; 963 964exit: 965 mutex_unlock(&lpss_iosf_mutex); 966} 967 968static void lpss_iosf_exit_d3_state(void) 969{ 970 u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 | 971 LPSS_GPIODEF0_DMA_LLP; 972 u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP; 973 u32 value2 = LPSS_PMCSR_D0; 974 u32 mask2 = LPSS_PMCSR_Dx_MASK; 975 976 mutex_lock(&lpss_iosf_mutex); 977 978 if (!lpss_iosf_d3_entered) 979 goto exit; 980 981 lpss_iosf_d3_entered = false; 982 983 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE, 984 LPSS_IOSF_GPIODEF0, value1, mask1); 985 986 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE, 987 LPSS_IOSF_PMCSR, value2, mask2); 988 989 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE, 990 LPSS_IOSF_PMCSR, value2, mask2); 991 992exit: 993 mutex_unlock(&lpss_iosf_mutex); 994} 995 996static int acpi_lpss_suspend(struct device *dev, bool wakeup) 997{ 998 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 999 int ret; 1000 1001 if (pdata->dev_desc->flags & LPSS_SAVE_CTX) 1002 acpi_lpss_save_ctx(dev, pdata); 1003 1004 ret = acpi_dev_suspend(dev, wakeup); 1005 1006 /* 1007 * This call must be last in the sequence, otherwise PMC will return 1008 * wrong status for devices being about to be powered off. See 1009 * lpss_iosf_enter_d3_state() for further information. 1010 */ 1011 if (acpi_target_system_state() == ACPI_STATE_S0 && 1012 lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) 1013 lpss_iosf_enter_d3_state(); 1014 1015 return ret; 1016} 1017 1018static int acpi_lpss_resume(struct device *dev) 1019{ 1020 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1021 int ret; 1022 1023 /* 1024 * This call is kept first to be in symmetry with 1025 * acpi_lpss_runtime_suspend() one. 1026 */ 1027 if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) 1028 lpss_iosf_exit_d3_state(); 1029 1030 ret = acpi_dev_resume(dev); 1031 if (ret) 1032 return ret; 1033 1034 acpi_lpss_d3_to_d0_delay(pdata); 1035 1036 if (pdata->dev_desc->flags & (LPSS_SAVE_CTX | LPSS_SAVE_CTX_ONCE)) 1037 acpi_lpss_restore_ctx(dev, pdata); 1038 1039 return 0; 1040} 1041 1042#ifdef CONFIG_PM_SLEEP 1043static int acpi_lpss_do_suspend_late(struct device *dev) 1044{ 1045 int ret; 1046 1047 if (dev_pm_skip_suspend(dev)) 1048 return 0; 1049 1050 ret = pm_generic_suspend_late(dev); 1051 return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev)); 1052} 1053 1054static int acpi_lpss_suspend_late(struct device *dev) 1055{ 1056 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1057 1058 if (pdata->dev_desc->resume_from_noirq) 1059 return 0; 1060 1061 return acpi_lpss_do_suspend_late(dev); 1062} 1063 1064static int acpi_lpss_suspend_noirq(struct device *dev) 1065{ 1066 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1067 int ret; 1068 1069 if (pdata->dev_desc->resume_from_noirq) { 1070 /* 1071 * The driver's ->suspend_late callback will be invoked by 1072 * acpi_lpss_do_suspend_late(), with the assumption that the 1073 * driver really wanted to run that code in ->suspend_noirq, but 1074 * it could not run after acpi_dev_suspend() and the driver 1075 * expected the latter to be called in the "late" phase. 1076 */ 1077 ret = acpi_lpss_do_suspend_late(dev); 1078 if (ret) 1079 return ret; 1080 } 1081 1082 return acpi_subsys_suspend_noirq(dev); 1083} 1084 1085static int acpi_lpss_do_resume_early(struct device *dev) 1086{ 1087 int ret = acpi_lpss_resume(dev); 1088 1089 return ret ? ret : pm_generic_resume_early(dev); 1090} 1091 1092static int acpi_lpss_resume_early(struct device *dev) 1093{ 1094 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1095 1096 if (pdata->dev_desc->resume_from_noirq) 1097 return 0; 1098 1099 if (dev_pm_skip_resume(dev)) 1100 return 0; 1101 1102 return acpi_lpss_do_resume_early(dev); 1103} 1104 1105static int acpi_lpss_resume_noirq(struct device *dev) 1106{ 1107 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1108 int ret; 1109 1110 /* Follow acpi_subsys_resume_noirq(). */ 1111 if (dev_pm_skip_resume(dev)) 1112 return 0; 1113 1114 ret = pm_generic_resume_noirq(dev); 1115 if (ret) 1116 return ret; 1117 1118 if (!pdata->dev_desc->resume_from_noirq) 1119 return 0; 1120 1121 /* 1122 * The driver's ->resume_early callback will be invoked by 1123 * acpi_lpss_do_resume_early(), with the assumption that the driver 1124 * really wanted to run that code in ->resume_noirq, but it could not 1125 * run before acpi_dev_resume() and the driver expected the latter to be 1126 * called in the "early" phase. 1127 */ 1128 return acpi_lpss_do_resume_early(dev); 1129} 1130 1131static int acpi_lpss_do_restore_early(struct device *dev) 1132{ 1133 int ret = acpi_lpss_resume(dev); 1134 1135 return ret ? ret : pm_generic_restore_early(dev); 1136} 1137 1138static int acpi_lpss_restore_early(struct device *dev) 1139{ 1140 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1141 1142 if (pdata->dev_desc->resume_from_noirq) 1143 return 0; 1144 1145 return acpi_lpss_do_restore_early(dev); 1146} 1147 1148static int acpi_lpss_restore_noirq(struct device *dev) 1149{ 1150 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1151 int ret; 1152 1153 ret = pm_generic_restore_noirq(dev); 1154 if (ret) 1155 return ret; 1156 1157 if (!pdata->dev_desc->resume_from_noirq) 1158 return 0; 1159 1160 /* This is analogous to what happens in acpi_lpss_resume_noirq(). */ 1161 return acpi_lpss_do_restore_early(dev); 1162} 1163 1164static int acpi_lpss_do_poweroff_late(struct device *dev) 1165{ 1166 int ret = pm_generic_poweroff_late(dev); 1167 1168 return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev)); 1169} 1170 1171static int acpi_lpss_poweroff_late(struct device *dev) 1172{ 1173 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1174 1175 if (dev_pm_skip_suspend(dev)) 1176 return 0; 1177 1178 if (pdata->dev_desc->resume_from_noirq) 1179 return 0; 1180 1181 return acpi_lpss_do_poweroff_late(dev); 1182} 1183 1184static int acpi_lpss_poweroff_noirq(struct device *dev) 1185{ 1186 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1187 1188 if (dev_pm_skip_suspend(dev)) 1189 return 0; 1190 1191 if (pdata->dev_desc->resume_from_noirq) { 1192 /* This is analogous to the acpi_lpss_suspend_noirq() case. */ 1193 int ret = acpi_lpss_do_poweroff_late(dev); 1194 1195 if (ret) 1196 return ret; 1197 } 1198 1199 return pm_generic_poweroff_noirq(dev); 1200} 1201#endif /* CONFIG_PM_SLEEP */ 1202 1203static int acpi_lpss_runtime_suspend(struct device *dev) 1204{ 1205 int ret = pm_generic_runtime_suspend(dev); 1206 1207 return ret ? ret : acpi_lpss_suspend(dev, true); 1208} 1209 1210static int acpi_lpss_runtime_resume(struct device *dev) 1211{ 1212 int ret = acpi_lpss_resume(dev); 1213 1214 return ret ? ret : pm_generic_runtime_resume(dev); 1215} 1216#endif /* CONFIG_PM */ 1217 1218static struct dev_pm_domain acpi_lpss_pm_domain = { 1219#ifdef CONFIG_PM 1220 .activate = acpi_lpss_activate, 1221 .dismiss = acpi_lpss_dismiss, 1222#endif 1223 .ops = { 1224#ifdef CONFIG_PM 1225#ifdef CONFIG_PM_SLEEP 1226 .prepare = acpi_subsys_prepare, 1227 .complete = acpi_subsys_complete, 1228 .suspend = acpi_subsys_suspend, 1229 .suspend_late = acpi_lpss_suspend_late, 1230 .suspend_noirq = acpi_lpss_suspend_noirq, 1231 .resume_noirq = acpi_lpss_resume_noirq, 1232 .resume_early = acpi_lpss_resume_early, 1233 .freeze = acpi_subsys_freeze, 1234 .poweroff = acpi_subsys_poweroff, 1235 .poweroff_late = acpi_lpss_poweroff_late, 1236 .poweroff_noirq = acpi_lpss_poweroff_noirq, 1237 .restore_noirq = acpi_lpss_restore_noirq, 1238 .restore_early = acpi_lpss_restore_early, 1239#endif 1240 .runtime_suspend = acpi_lpss_runtime_suspend, 1241 .runtime_resume = acpi_lpss_runtime_resume, 1242#endif 1243 }, 1244}; 1245 1246static int acpi_lpss_platform_notify(struct notifier_block *nb, 1247 unsigned long action, void *data) 1248{ 1249 struct platform_device *pdev = to_platform_device(data); 1250 struct lpss_private_data *pdata; 1251 struct acpi_device *adev; 1252 const struct acpi_device_id *id; 1253 1254 id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev); 1255 if (!id || !id->driver_data) 1256 return 0; 1257 1258 adev = ACPI_COMPANION(&pdev->dev); 1259 if (!adev) 1260 return 0; 1261 1262 pdata = acpi_driver_data(adev); 1263 if (!pdata) 1264 return 0; 1265 1266 if (pdata->mmio_base && 1267 pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) { 1268 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n"); 1269 return 0; 1270 } 1271 1272 switch (action) { 1273 case BUS_NOTIFY_BIND_DRIVER: 1274 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain); 1275 break; 1276 case BUS_NOTIFY_DRIVER_NOT_BOUND: 1277 case BUS_NOTIFY_UNBOUND_DRIVER: 1278 dev_pm_domain_set(&pdev->dev, NULL); 1279 break; 1280 case BUS_NOTIFY_ADD_DEVICE: 1281 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain); 1282 if (pdata->dev_desc->flags & LPSS_LTR) 1283 return sysfs_create_group(&pdev->dev.kobj, 1284 &lpss_attr_group); 1285 break; 1286 case BUS_NOTIFY_DEL_DEVICE: 1287 if (pdata->dev_desc->flags & LPSS_LTR) 1288 sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group); 1289 dev_pm_domain_set(&pdev->dev, NULL); 1290 break; 1291 default: 1292 break; 1293 } 1294 1295 return 0; 1296} 1297 1298static struct notifier_block acpi_lpss_nb = { 1299 .notifier_call = acpi_lpss_platform_notify, 1300}; 1301 1302static void acpi_lpss_bind(struct device *dev) 1303{ 1304 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); 1305 1306 if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR)) 1307 return; 1308 1309 if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) 1310 dev->power.set_latency_tolerance = acpi_lpss_set_ltr; 1311 else 1312 dev_err(dev, "MMIO size insufficient to access LTR\n"); 1313} 1314 1315static void acpi_lpss_unbind(struct device *dev) 1316{ 1317 dev->power.set_latency_tolerance = NULL; 1318} 1319 1320static struct acpi_scan_handler lpss_handler = { 1321 .ids = acpi_lpss_device_ids, 1322 .attach = acpi_lpss_create_device, 1323 .bind = acpi_lpss_bind, 1324 .unbind = acpi_lpss_unbind, 1325}; 1326 1327void __init acpi_lpss_init(void) 1328{ 1329 const struct x86_cpu_id *id; 1330 int ret; 1331 1332 ret = lpss_atom_clk_init(); 1333 if (ret) 1334 return; 1335 1336 id = x86_match_cpu(lpss_cpu_ids); 1337 if (id) 1338 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON; 1339 1340 bus_register_notifier(&platform_bus_type, &acpi_lpss_nb); 1341 acpi_scan_add_handler(&lpss_handler); 1342} 1343 1344#else 1345 1346static struct acpi_scan_handler lpss_handler = { 1347 .ids = acpi_lpss_device_ids, 1348}; 1349 1350void __init acpi_lpss_init(void) 1351{ 1352 acpi_scan_add_handler(&lpss_handler); 1353} 1354 1355#endif /* CONFIG_X86_INTEL_LPSS */ 1356