1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Freescale MPC85xx/MPC86xx RapidIO support 4 * 5 * Copyright 2009 Sysgo AG 6 * Thomas Moll <thomas.moll@sysgo.com> 7 * - fixed maintenance access routines, check for aligned access 8 * 9 * Copyright 2009 Integrated Device Technology, Inc. 10 * Alex Bounine <alexandre.bounine@idt.com> 11 * - Added Port-Write message handling 12 * - Added Machine Check exception handling 13 * 14 * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc. 15 * Zhang Wei <wei.zhang@freescale.com> 16 * 17 * Copyright 2005 MontaVista Software, Inc. 18 * Matt Porter <mporter@kernel.crashing.org> 19 */ 20 21#include <linux/init.h> 22#include <linux/extable.h> 23#include <linux/types.h> 24#include <linux/dma-mapping.h> 25#include <linux/interrupt.h> 26#include <linux/of.h> 27#include <linux/of_address.h> 28#include <linux/of_irq.h> 29#include <linux/platform_device.h> 30#include <linux/delay.h> 31#include <linux/slab.h> 32 33#include <linux/io.h> 34#include <linux/uaccess.h> 35#include <asm/machdep.h> 36#include <asm/rio.h> 37 38#include "fsl_rio.h" 39 40#undef DEBUG_PW /* Port-Write debugging */ 41 42#define RIO_PORT1_EDCSR 0x0640 43#define RIO_PORT2_EDCSR 0x0680 44#define RIO_PORT1_IECSR 0x10130 45#define RIO_PORT2_IECSR 0x101B0 46 47#define RIO_GCCSR 0x13c 48#define RIO_ESCSR 0x158 49#define ESCSR_CLEAR 0x07120204 50#define RIO_PORT2_ESCSR 0x178 51#define RIO_CCSR 0x15c 52#define RIO_LTLEDCSR_IER 0x80000000 53#define RIO_LTLEDCSR_PRT 0x01000000 54#define IECSR_CLEAR 0x80000000 55#define RIO_ISR_AACR 0x10120 56#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */ 57 58#define RIWTAR_TRAD_VAL_SHIFT 12 59#define RIWTAR_TRAD_MASK 0x00FFFFFF 60#define RIWBAR_BADD_VAL_SHIFT 12 61#define RIWBAR_BADD_MASK 0x003FFFFF 62#define RIWAR_ENABLE 0x80000000 63#define RIWAR_TGINT_LOCAL 0x00F00000 64#define RIWAR_RDTYP_NO_SNOOP 0x00040000 65#define RIWAR_RDTYP_SNOOP 0x00050000 66#define RIWAR_WRTYP_NO_SNOOP 0x00004000 67#define RIWAR_WRTYP_SNOOP 0x00005000 68#define RIWAR_WRTYP_ALLOC 0x00006000 69#define RIWAR_SIZE_MASK 0x0000003F 70 71static DEFINE_SPINLOCK(fsl_rio_config_lock); 72 73#define ___fsl_read_rio_config(x, addr, err, op, barrier) \ 74 __asm__ __volatile__( \ 75 "1: "op" %1,0(%2)\n" \ 76 " "barrier"\n" \ 77 "2:\n" \ 78 ".section .fixup,\"ax\"\n" \ 79 "3: li %1,-1\n" \ 80 " li %0,%3\n" \ 81 " b 2b\n" \ 82 ".previous\n" \ 83 EX_TABLE(1b, 3b) \ 84 : "=r" (err), "=r" (x) \ 85 : "b" (addr), "i" (-EFAULT), "0" (err)) 86 87#ifdef CONFIG_BOOKE 88#define __fsl_read_rio_config(x, addr, err, op) \ 89 ___fsl_read_rio_config(x, addr, err, op, "mbar") 90#else 91#define __fsl_read_rio_config(x, addr, err, op) \ 92 ___fsl_read_rio_config(x, addr, err, op, "eieio") 93#endif 94 95void __iomem *rio_regs_win; 96void __iomem *rmu_regs_win; 97resource_size_t rio_law_start; 98 99struct fsl_rio_dbell *dbell; 100struct fsl_rio_pw *pw; 101 102#ifdef CONFIG_PPC_E500 103int fsl_rio_mcheck_exception(struct pt_regs *regs) 104{ 105 const struct exception_table_entry *entry; 106 unsigned long reason; 107 108 if (!rio_regs_win) 109 return 0; 110 111 reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); 112 if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { 113 /* Check if we are prepared to handle this fault */ 114 entry = search_exception_tables(regs->nip); 115 if (entry) { 116 pr_debug("RIO: %s - MC Exception handled\n", 117 __func__); 118 out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 119 0); 120 regs_set_recoverable(regs); 121 regs_set_return_ip(regs, extable_fixup(entry)); 122 return 1; 123 } 124 } 125 126 return 0; 127} 128EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception); 129#endif 130 131/** 132 * fsl_local_config_read - Generate a MPC85xx local config space read 133 * @mport: RapidIO master port info 134 * @index: ID of RapdiIO interface 135 * @offset: Offset into configuration space 136 * @len: Length (in bytes) of the maintenance transaction 137 * @data: Value to be read into 138 * 139 * Generates a MPC85xx local configuration space read. Returns %0 on 140 * success or %-EINVAL on failure. 141 */ 142static int fsl_local_config_read(struct rio_mport *mport, 143 int index, u32 offset, int len, u32 *data) 144{ 145 struct rio_priv *priv = mport->priv; 146 pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index, 147 offset); 148 *data = in_be32(priv->regs_win + offset); 149 150 return 0; 151} 152 153/** 154 * fsl_local_config_write - Generate a MPC85xx local config space write 155 * @mport: RapidIO master port info 156 * @index: ID of RapdiIO interface 157 * @offset: Offset into configuration space 158 * @len: Length (in bytes) of the maintenance transaction 159 * @data: Value to be written 160 * 161 * Generates a MPC85xx local configuration space write. Returns %0 on 162 * success or %-EINVAL on failure. 163 */ 164static int fsl_local_config_write(struct rio_mport *mport, 165 int index, u32 offset, int len, u32 data) 166{ 167 struct rio_priv *priv = mport->priv; 168 pr_debug 169 ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n", 170 index, offset, data); 171 out_be32(priv->regs_win + offset, data); 172 173 return 0; 174} 175 176/** 177 * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction 178 * @mport: RapidIO master port info 179 * @index: ID of RapdiIO interface 180 * @destid: Destination ID of transaction 181 * @hopcount: Number of hops to target device 182 * @offset: Offset into configuration space 183 * @len: Length (in bytes) of the maintenance transaction 184 * @val: Location to be read into 185 * 186 * Generates a MPC85xx read maintenance transaction. Returns %0 on 187 * success or %-EINVAL on failure. 188 */ 189static int 190fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, 191 u8 hopcount, u32 offset, int len, u32 *val) 192{ 193 struct rio_priv *priv = mport->priv; 194 unsigned long flags; 195 u8 *data; 196 u32 rval, err = 0; 197 198 pr_debug 199 ("fsl_rio_config_read:" 200 " index %d destid %d hopcount %d offset %8.8x len %d\n", 201 index, destid, hopcount, offset, len); 202 203 /* 16MB maintenance window possible */ 204 /* allow only aligned access to maintenance registers */ 205 if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) 206 return -EINVAL; 207 208 spin_lock_irqsave(&fsl_rio_config_lock, flags); 209 210 out_be32(&priv->maint_atmu_regs->rowtar, 211 (destid << 22) | (hopcount << 12) | (offset >> 12)); 212 out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); 213 214 data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); 215 switch (len) { 216 case 1: 217 __fsl_read_rio_config(rval, data, err, "lbz"); 218 break; 219 case 2: 220 __fsl_read_rio_config(rval, data, err, "lhz"); 221 break; 222 case 4: 223 __fsl_read_rio_config(rval, data, err, "lwz"); 224 break; 225 default: 226 spin_unlock_irqrestore(&fsl_rio_config_lock, flags); 227 return -EINVAL; 228 } 229 230 if (err) { 231 pr_debug("RIO: cfg_read error %d for %x:%x:%x\n", 232 err, destid, hopcount, offset); 233 } 234 235 spin_unlock_irqrestore(&fsl_rio_config_lock, flags); 236 *val = rval; 237 238 return err; 239} 240 241/** 242 * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction 243 * @mport: RapidIO master port info 244 * @index: ID of RapdiIO interface 245 * @destid: Destination ID of transaction 246 * @hopcount: Number of hops to target device 247 * @offset: Offset into configuration space 248 * @len: Length (in bytes) of the maintenance transaction 249 * @val: Value to be written 250 * 251 * Generates an MPC85xx write maintenance transaction. Returns %0 on 252 * success or %-EINVAL on failure. 253 */ 254static int 255fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, 256 u8 hopcount, u32 offset, int len, u32 val) 257{ 258 struct rio_priv *priv = mport->priv; 259 unsigned long flags; 260 u8 *data; 261 int ret = 0; 262 263 pr_debug 264 ("fsl_rio_config_write:" 265 " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", 266 index, destid, hopcount, offset, len, val); 267 268 /* 16MB maintenance windows possible */ 269 /* allow only aligned access to maintenance registers */ 270 if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) 271 return -EINVAL; 272 273 spin_lock_irqsave(&fsl_rio_config_lock, flags); 274 275 out_be32(&priv->maint_atmu_regs->rowtar, 276 (destid << 22) | (hopcount << 12) | (offset >> 12)); 277 out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); 278 279 data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); 280 switch (len) { 281 case 1: 282 out_8((u8 *) data, val); 283 break; 284 case 2: 285 out_be16((u16 *) data, val); 286 break; 287 case 4: 288 out_be32((u32 *) data, val); 289 break; 290 default: 291 ret = -EINVAL; 292 } 293 spin_unlock_irqrestore(&fsl_rio_config_lock, flags); 294 295 return ret; 296} 297 298static void fsl_rio_inbound_mem_init(struct rio_priv *priv) 299{ 300 int i; 301 302 /* close inbound windows */ 303 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) 304 out_be32(&priv->inb_atmu_regs[i].riwar, 0); 305} 306 307static int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, 308 u64 rstart, u64 size, u32 flags) 309{ 310 struct rio_priv *priv = mport->priv; 311 u32 base_size; 312 unsigned int base_size_log; 313 u64 win_start, win_end; 314 u32 riwar; 315 int i; 316 317 if ((size & (size - 1)) != 0 || size > 0x400000000ULL) 318 return -EINVAL; 319 320 base_size_log = ilog2(size); 321 base_size = 1 << base_size_log; 322 323 /* check if addresses are aligned with the window size */ 324 if (lstart & (base_size - 1)) 325 return -EINVAL; 326 if (rstart & (base_size - 1)) 327 return -EINVAL; 328 329 /* check for conflicting ranges */ 330 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { 331 riwar = in_be32(&priv->inb_atmu_regs[i].riwar); 332 if ((riwar & RIWAR_ENABLE) == 0) 333 continue; 334 win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK)) 335 << RIWBAR_BADD_VAL_SHIFT; 336 win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1); 337 if (rstart < win_end && (rstart + size) > win_start) 338 return -EINVAL; 339 } 340 341 /* find unused atmu */ 342 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { 343 riwar = in_be32(&priv->inb_atmu_regs[i].riwar); 344 if ((riwar & RIWAR_ENABLE) == 0) 345 break; 346 } 347 if (i >= RIO_INB_ATMU_COUNT) 348 return -ENOMEM; 349 350 out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT); 351 out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT); 352 out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL | 353 RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1)); 354 355 return 0; 356} 357 358static void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart) 359{ 360 u32 win_start_shift, base_start_shift; 361 struct rio_priv *priv = mport->priv; 362 u32 riwar, riwtar; 363 int i; 364 365 /* skip default window */ 366 base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT; 367 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { 368 riwar = in_be32(&priv->inb_atmu_regs[i].riwar); 369 if ((riwar & RIWAR_ENABLE) == 0) 370 continue; 371 372 riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar); 373 win_start_shift = riwtar & RIWTAR_TRAD_MASK; 374 if (win_start_shift == base_start_shift) { 375 out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE); 376 return; 377 } 378 } 379} 380 381void fsl_rio_port_error_handler(int offset) 382{ 383 /*XXX: Error recovery is not implemented, we just clear errors */ 384 out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); 385 386 if (offset == 0) { 387 out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0); 388 out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR); 389 out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR); 390 } else { 391 out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0); 392 out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR); 393 out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); 394 } 395} 396static inline void fsl_rio_info(struct device *dev, u32 ccsr) 397{ 398 const char *str; 399 if (ccsr & 1) { 400 /* Serial phy */ 401 switch (ccsr >> 30) { 402 case 0: 403 str = "1"; 404 break; 405 case 1: 406 str = "4"; 407 break; 408 default: 409 str = "Unknown"; 410 break; 411 } 412 dev_info(dev, "Hardware port width: %s\n", str); 413 414 switch ((ccsr >> 27) & 7) { 415 case 0: 416 str = "Single-lane 0"; 417 break; 418 case 1: 419 str = "Single-lane 2"; 420 break; 421 case 2: 422 str = "Four-lane"; 423 break; 424 default: 425 str = "Unknown"; 426 break; 427 } 428 dev_info(dev, "Training connection status: %s\n", str); 429 } else { 430 /* Parallel phy */ 431 if (!(ccsr & 0x80000000)) 432 dev_info(dev, "Output port operating in 8-bit mode\n"); 433 if (!(ccsr & 0x08000000)) 434 dev_info(dev, "Input port operating in 8-bit mode\n"); 435 } 436} 437 438/** 439 * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface 440 * @dev: platform_device pointer 441 * 442 * Initializes MPC85xx RapidIO hardware interface, configures 443 * master port with system-specific info, and registers the 444 * master port with the RapidIO subsystem. 445 */ 446static int fsl_rio_setup(struct platform_device *dev) 447{ 448 struct rio_ops *ops; 449 struct rio_mport *port; 450 struct rio_priv *priv; 451 int rc = 0; 452 const u32 *port_index; 453 u32 active_ports = 0; 454 struct device_node *np, *rmu_node; 455 u32 ccsr; 456 u64 range_start; 457 u32 i; 458 static int tmp; 459 struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL}; 460 461 if (!dev->dev.of_node) { 462 dev_err(&dev->dev, "Device OF-Node is NULL"); 463 return -ENODEV; 464 } 465 466 rio_regs_win = of_iomap(dev->dev.of_node, 0); 467 if (!rio_regs_win) { 468 dev_err(&dev->dev, "Unable to map rio register window\n"); 469 rc = -ENOMEM; 470 goto err_rio_regs; 471 } 472 473 ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); 474 if (!ops) { 475 rc = -ENOMEM; 476 goto err_ops; 477 } 478 ops->lcread = fsl_local_config_read; 479 ops->lcwrite = fsl_local_config_write; 480 ops->cread = fsl_rio_config_read; 481 ops->cwrite = fsl_rio_config_write; 482 ops->dsend = fsl_rio_doorbell_send; 483 ops->pwenable = fsl_rio_pw_enable; 484 ops->open_outb_mbox = fsl_open_outb_mbox; 485 ops->open_inb_mbox = fsl_open_inb_mbox; 486 ops->close_outb_mbox = fsl_close_outb_mbox; 487 ops->close_inb_mbox = fsl_close_inb_mbox; 488 ops->add_outb_message = fsl_add_outb_message; 489 ops->add_inb_buffer = fsl_add_inb_buffer; 490 ops->get_inb_message = fsl_get_inb_message; 491 ops->map_inb = fsl_map_inb_mem; 492 ops->unmap_inb = fsl_unmap_inb_mem; 493 494 rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0); 495 if (!rmu_node) { 496 dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n"); 497 rc = -ENOENT; 498 goto err_rmu; 499 } 500 rmu_regs_win = of_iomap(rmu_node, 0); 501 502 of_node_put(rmu_node); 503 if (!rmu_regs_win) { 504 dev_err(&dev->dev, "Unable to map rmu register window\n"); 505 rc = -ENOMEM; 506 goto err_rmu; 507 } 508 for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") { 509 rmu_np[tmp] = np; 510 tmp++; 511 } 512 513 /*set up doobell node*/ 514 np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit"); 515 if (!np) { 516 dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n"); 517 rc = -ENODEV; 518 goto err_dbell; 519 } 520 dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL); 521 if (!(dbell)) { 522 dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n"); 523 rc = -ENOMEM; 524 goto err_dbell; 525 } 526 dbell->dev = &dev->dev; 527 dbell->bellirq = irq_of_parse_and_map(np, 1); 528 dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq); 529 530 if (of_property_read_reg(np, 0, &range_start, NULL)) { 531 pr_err("%pOF: unable to find 'reg' property\n", 532 np); 533 rc = -ENOMEM; 534 goto err_pw; 535 } 536 dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win + 537 (u32)range_start); 538 539 /*set up port write node*/ 540 np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit"); 541 if (!np) { 542 dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n"); 543 rc = -ENODEV; 544 goto err_pw; 545 } 546 pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL); 547 if (!(pw)) { 548 dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n"); 549 rc = -ENOMEM; 550 goto err_pw; 551 } 552 pw->dev = &dev->dev; 553 pw->pwirq = irq_of_parse_and_map(np, 0); 554 dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq); 555 if (of_property_read_reg(np, 0, &range_start, NULL)) { 556 pr_err("%pOF: unable to find 'reg' property\n", 557 np); 558 rc = -ENOMEM; 559 goto err; 560 } 561 pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start); 562 563 /*set up ports node*/ 564 for_each_child_of_node(dev->dev.of_node, np) { 565 struct resource res; 566 567 port_index = of_get_property(np, "cell-index", NULL); 568 if (!port_index) { 569 dev_err(&dev->dev, "Can't get %pOF property 'cell-index'\n", 570 np); 571 continue; 572 } 573 574 if (of_range_to_resource(np, 0, &res)) { 575 dev_err(&dev->dev, "Can't get %pOF property 'ranges'\n", 576 np); 577 continue; 578 } 579 580 dev_info(&dev->dev, "%pOF: LAW %pR\n", 581 np, &res); 582 583 port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); 584 if (!port) 585 continue; 586 587 rc = rio_mport_initialize(port); 588 if (rc) { 589 kfree(port); 590 continue; 591 } 592 593 i = *port_index - 1; 594 port->index = (unsigned char)i; 595 596 priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL); 597 if (!priv) { 598 dev_err(&dev->dev, "Can't alloc memory for 'priv'\n"); 599 kfree(port); 600 continue; 601 } 602 603 INIT_LIST_HEAD(&port->dbells); 604 port->iores = res; /* struct copy */ 605 port->iores.name = "rio_io_win"; 606 607 if (request_resource(&iomem_resource, &port->iores) < 0) { 608 dev_err(&dev->dev, "RIO: Error requesting master port region" 609 " 0x%016llx-0x%016llx\n", 610 (u64)port->iores.start, (u64)port->iores.end); 611 kfree(priv); 612 kfree(port); 613 continue; 614 } 615 sprintf(port->name, "RIO mport %d", i); 616 617 priv->dev = &dev->dev; 618 port->dev.parent = &dev->dev; 619 port->ops = ops; 620 port->priv = priv; 621 port->phys_efptr = 0x100; 622 port->phys_rmap = 1; 623 priv->regs_win = rio_regs_win; 624 625 ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20); 626 627 /* Checking the port training status */ 628 if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) { 629 dev_err(&dev->dev, "Port %d is not ready. " 630 "Try to restart connection...\n", i); 631 /* Disable ports */ 632 out_be32(priv->regs_win 633 + RIO_CCSR + i*0x20, 0); 634 /* Set 1x lane */ 635 setbits32(priv->regs_win 636 + RIO_CCSR + i*0x20, 0x02000000); 637 /* Enable ports */ 638 setbits32(priv->regs_win 639 + RIO_CCSR + i*0x20, 0x00600000); 640 msleep(100); 641 if (in_be32((priv->regs_win 642 + RIO_ESCSR + i*0x20)) & 1) { 643 dev_err(&dev->dev, 644 "Port %d restart failed.\n", i); 645 release_resource(&port->iores); 646 kfree(priv); 647 kfree(port); 648 continue; 649 } 650 dev_info(&dev->dev, "Port %d restart success!\n", i); 651 } 652 fsl_rio_info(&dev->dev, ccsr); 653 654 port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR)) 655 & RIO_PEF_CTLS) >> 4; 656 dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n", 657 port->sys_size ? 65536 : 256); 658 659 if (port->host_deviceid >= 0) 660 out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST | 661 RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED); 662 else 663 out_be32(priv->regs_win + RIO_GCCSR, 664 RIO_PORT_GEN_MASTER); 665 666 priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win 667 + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET : 668 RIO_ATMU_REGS_PORT2_OFFSET)); 669 670 priv->maint_atmu_regs = priv->atmu_regs + 1; 671 priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *) 672 (priv->regs_win + 673 ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET : 674 RIO_INB_ATMU_REGS_PORT2_OFFSET)); 675 676 /* Set to receive packets with any dest ID */ 677 out_be32((priv->regs_win + RIO_ISR_AACR + i*0x80), 678 RIO_ISR_AACR_AA); 679 680 /* Configure maintenance transaction window */ 681 out_be32(&priv->maint_atmu_regs->rowbar, 682 port->iores.start >> 12); 683 out_be32(&priv->maint_atmu_regs->rowar, 684 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1)); 685 686 priv->maint_win = ioremap(port->iores.start, 687 RIO_MAINT_WIN_SIZE); 688 689 rio_law_start = range_start; 690 691 fsl_rio_setup_rmu(port, rmu_np[i]); 692 fsl_rio_inbound_mem_init(priv); 693 694 dbell->mport[i] = port; 695 pw->mport[i] = port; 696 697 if (rio_register_mport(port)) { 698 release_resource(&port->iores); 699 kfree(priv); 700 kfree(port); 701 continue; 702 } 703 active_ports++; 704 } 705 706 if (!active_ports) { 707 rc = -ENOLINK; 708 goto err; 709 } 710 711 fsl_rio_doorbell_init(dbell); 712 fsl_rio_port_write_init(pw); 713 714 return 0; 715err: 716 kfree(pw); 717 pw = NULL; 718err_pw: 719 kfree(dbell); 720 dbell = NULL; 721err_dbell: 722 iounmap(rmu_regs_win); 723 rmu_regs_win = NULL; 724err_rmu: 725 kfree(ops); 726err_ops: 727 iounmap(rio_regs_win); 728 rio_regs_win = NULL; 729err_rio_regs: 730 return rc; 731} 732 733/* The probe function for RapidIO peer-to-peer network. 734 */ 735static int fsl_of_rio_rpn_probe(struct platform_device *dev) 736{ 737 printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n", 738 dev->dev.of_node); 739 740 return fsl_rio_setup(dev); 741}; 742 743static const struct of_device_id fsl_of_rio_rpn_ids[] = { 744 { 745 .compatible = "fsl,srio", 746 }, 747 {}, 748}; 749 750static struct platform_driver fsl_of_rio_rpn_driver = { 751 .driver = { 752 .name = "fsl-of-rio", 753 .of_match_table = fsl_of_rio_rpn_ids, 754 }, 755 .probe = fsl_of_rio_rpn_probe, 756}; 757 758static __init int fsl_of_rio_rpn_init(void) 759{ 760 return platform_driver_register(&fsl_of_rio_rpn_driver); 761} 762 763subsys_initcall(fsl_of_rio_rpn_init); 764