1// SPDX-License-Identifier: GPL-2.0
2/***************************************************************************/
3
4/*
5 *	m5307.c  -- platform support for ColdFire 5307 based boards
6 *
7 *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
8 *	Copyright (C) 2000, Lineo (www.lineo.com)
9 */
10
11/***************************************************************************/
12
13#include <linux/clkdev.h>
14#include <linux/kernel.h>
15#include <linux/param.h>
16#include <linux/init.h>
17#include <linux/io.h>
18#include <asm/machdep.h>
19#include <asm/coldfire.h>
20#include <asm/mcfsim.h>
21#include <asm/mcfwdebug.h>
22#include <asm/mcfclk.h>
23
24/***************************************************************************/
25
26/*
27 *	Some platforms need software versions of the GPIO data registers.
28 */
29unsigned short ppdata;
30unsigned char ledbank = 0xff;
31
32/***************************************************************************/
33
34DEFINE_CLK(pll, "pll.0", MCF_CLK);
35DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
36
37static struct clk_lookup m5307_clk_lookup[] = {
38	CLKDEV_INIT(NULL, "pll.0", &clk_pll),
39	CLKDEV_INIT(NULL, "sys.0", &clk_sys),
40	CLKDEV_INIT("mcftmr.0", NULL, &clk_sys),
41	CLKDEV_INIT("mcftmr.1", NULL, &clk_sys),
42	CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
43	CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
44	CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
45};
46
47/***************************************************************************/
48
49static void __init m5307_i2c_init(void)
50{
51#if IS_ENABLED(CONFIG_I2C_IMX)
52	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
53	       MCFSIM_I2CICR);
54	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
55#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
56}
57
58/***************************************************************************/
59
60void __init config_BSP(char *commandp, int size)
61{
62#if defined(CONFIG_NETtel) || \
63    defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
64	/* Copy command line from FLASH to local buffer... */
65	memcpy(commandp, (char *) 0xf0004000, size);
66	commandp[size-1] = 0;
67#endif
68
69	mach_sched_init = hw_timer_init;
70
71	/* Only support the external interrupts on their primary level */
72	mcf_mapirq2imr(25, MCFINTC_EINT1);
73	mcf_mapirq2imr(27, MCFINTC_EINT3);
74	mcf_mapirq2imr(29, MCFINTC_EINT5);
75	mcf_mapirq2imr(31, MCFINTC_EINT7);
76
77#ifdef CONFIG_BDM_DISABLE
78	/*
79	 * Disable the BDM clocking.  This also turns off most of the rest of
80	 * the BDM device.  This is good for EMC reasons. This option is not
81	 * incompatible with the memory protection option.
82	 */
83	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
84#endif
85	m5307_i2c_init();
86
87	clkdev_add_table(m5307_clk_lookup, ARRAY_SIZE(m5307_clk_lookup));
88}
89
90/***************************************************************************/
91