1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * dts file for Xilinx ZynqMP ZCU111 4 * 5 * (C) Copyright 2017 - 2022, Xilinx, Inc. 6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. 7 * 8 * Michal Simek <michal.simek@amd.com> 9 */ 10 11/dts-v1/; 12 13#include "zynqmp.dtsi" 14#include "zynqmp-clk-ccf.dtsi" 15#include <dt-bindings/input/input.h> 16#include <dt-bindings/gpio/gpio.h> 17#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> 18#include <dt-bindings/phy/phy.h> 19 20/ { 21 model = "ZynqMP ZCU111 RevA"; 22 compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp"; 23 24 aliases { 25 ethernet0 = &gem3; 26 i2c0 = &i2c0; 27 i2c1 = &i2c1; 28 mmc0 = &sdhci1; 29 nvmem0 = &eeprom; 30 rtc0 = &rtc; 31 serial0 = &uart0; 32 serial1 = &dcc; 33 spi0 = &qspi; 34 usb0 = &usb0; 35 }; 36 37 chosen { 38 bootargs = "earlycon"; 39 stdout-path = "serial0:115200n8"; 40 }; 41 42 memory@0 { 43 device_type = "memory"; 44 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; 45 /* Another 4GB connected to PL */ 46 }; 47 48 gpio-keys { 49 compatible = "gpio-keys"; 50 autorepeat; 51 switch-19 { 52 label = "sw19"; 53 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; 54 linux,code = <KEY_DOWN>; 55 wakeup-source; 56 autorepeat; 57 }; 58 }; 59 60 leds { 61 compatible = "gpio-leds"; 62 heartbeat-led { 63 label = "heartbeat"; 64 gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; 65 linux,default-trigger = "heartbeat"; 66 }; 67 }; 68 69 ina226-u67 { 70 compatible = "iio-hwmon"; 71 io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>; 72 }; 73 ina226-u59 { 74 compatible = "iio-hwmon"; 75 io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>; 76 }; 77 ina226-u61 { 78 compatible = "iio-hwmon"; 79 io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>; 80 }; 81 ina226-u60 { 82 compatible = "iio-hwmon"; 83 io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>; 84 }; 85 ina226-u64 { 86 compatible = "iio-hwmon"; 87 io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>; 88 }; 89 ina226-u69 { 90 compatible = "iio-hwmon"; 91 io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>; 92 }; 93 ina226-u66 { 94 compatible = "iio-hwmon"; 95 io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>; 96 }; 97 ina226-u65 { 98 compatible = "iio-hwmon"; 99 io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; 100 }; 101 ina226-u63 { 102 compatible = "iio-hwmon"; 103 io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>; 104 }; 105 ina226-u3 { 106 compatible = "iio-hwmon"; 107 io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>; 108 }; 109 ina226-u71 { 110 compatible = "iio-hwmon"; 111 io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>; 112 }; 113 ina226-u77 { 114 compatible = "iio-hwmon"; 115 io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; 116 }; 117 ina226-u73 { 118 compatible = "iio-hwmon"; 119 io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>; 120 }; 121 ina226-u79 { 122 compatible = "iio-hwmon"; 123 io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; 124 }; 125 126 /* 48MHz reference crystal */ 127 ref48: ref48M { 128 compatible = "fixed-clock"; 129 #clock-cells = <0>; 130 clock-frequency = <48000000>; 131 }; 132}; 133 134&dcc { 135 status = "okay"; 136}; 137 138&fpd_dma_chan1 { 139 status = "okay"; 140}; 141 142&fpd_dma_chan2 { 143 status = "okay"; 144}; 145 146&fpd_dma_chan3 { 147 status = "okay"; 148}; 149 150&fpd_dma_chan4 { 151 status = "okay"; 152}; 153 154&fpd_dma_chan5 { 155 status = "okay"; 156}; 157 158&fpd_dma_chan6 { 159 status = "okay"; 160}; 161 162&fpd_dma_chan7 { 163 status = "okay"; 164}; 165 166&fpd_dma_chan8 { 167 status = "okay"; 168}; 169 170&gem3 { 171 status = "okay"; 172 phy-handle = <&phy0>; 173 phy-mode = "rgmii-id"; 174 pinctrl-names = "default"; 175 pinctrl-0 = <&pinctrl_gem3_default>; 176 mdio: mdio { 177 #address-cells = <1>; 178 #size-cells = <0>; 179 phy0: ethernet-phy@c { 180 #phy-cells = <1>; 181 compatible = "ethernet-phy-id2000.a231"; 182 reg = <0xc>; 183 ti,rx-internal-delay = <0x8>; 184 ti,tx-internal-delay = <0xa>; 185 ti,fifo-depth = <0x1>; 186 ti,dp83867-rxctrl-strap-quirk; 187 reset-gpios = <&tca6416_u22 6 GPIO_ACTIVE_LOW>; 188 }; 189 }; 190}; 191 192&gpio { 193 status = "okay"; 194 pinctrl-names = "default"; 195 pinctrl-0 = <&pinctrl_gpio_default>; 196}; 197 198&gpu { 199 status = "okay"; 200}; 201 202&i2c0 { 203 status = "okay"; 204 clock-frequency = <400000>; 205 pinctrl-names = "default", "gpio"; 206 pinctrl-0 = <&pinctrl_i2c0_default>; 207 pinctrl-1 = <&pinctrl_i2c0_gpio>; 208 scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 209 sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 210 211 tca6416_u22: gpio@20 { 212 compatible = "ti,tca6416"; 213 reg = <0x20>; 214 gpio-controller; /* interrupt not connected */ 215 #gpio-cells = <2>; 216 /* 217 * IRQ not connected 218 * Lines: 219 * 0 - MAX6643_OT_B 220 * 1 - MAX6643_FANFAIL_B 221 * 2 - MIO26_PMU_INPUT_LS 222 * 4 - SFP_SI5382_INT_ALM 223 * 5 - IIC_MUX_RESET_B 224 * 6 - GEM3_EXP_RESET_B 225 * 10 - FMCP_HSPC_PRSNT_M2C_B 226 * 11 - CLK_SPI_MUX_SEL0 227 * 12 - CLK_SPI_MUX_SEL1 228 * 16 - IRPS5401_ALERT_B 229 * 17 - INA226_PMBUS_ALERT 230 * 3, 7, 13-15 - not connected 231 */ 232 }; 233 234 i2c-mux@75 { /* u23 */ 235 compatible = "nxp,pca9544"; 236 #address-cells = <1>; 237 #size-cells = <0>; 238 reg = <0x75>; 239 i2c@0 { 240 #address-cells = <1>; 241 #size-cells = <0>; 242 reg = <0>; 243 /* PS_PMBUS */ 244 /* PMBUS_ALERT done via pca9544 */ 245 u67: ina226@40 { /* u67 */ 246 compatible = "ti,ina226"; 247 #io-channel-cells = <1>; 248 label = "ina226-u67"; 249 reg = <0x40>; 250 shunt-resistor = <2000>; 251 }; 252 u59: ina226@41 { /* u59 */ 253 compatible = "ti,ina226"; 254 #io-channel-cells = <1>; 255 label = "ina226-u59"; 256 reg = <0x41>; 257 shunt-resistor = <5000>; 258 }; 259 u61: ina226@42 { /* u61 */ 260 compatible = "ti,ina226"; 261 #io-channel-cells = <1>; 262 label = "ina226-u61"; 263 reg = <0x42>; 264 shunt-resistor = <5000>; 265 }; 266 u60: ina226@43 { /* u60 */ 267 compatible = "ti,ina226"; 268 #io-channel-cells = <1>; 269 label = "ina226-u60"; 270 reg = <0x43>; 271 shunt-resistor = <5000>; 272 }; 273 u64: ina226@45 { /* u64 */ 274 compatible = "ti,ina226"; 275 #io-channel-cells = <1>; 276 label = "ina226-u64"; 277 reg = <0x45>; 278 shunt-resistor = <5000>; 279 }; 280 u69: ina226@46 { /* u69 */ 281 compatible = "ti,ina226"; 282 #io-channel-cells = <1>; 283 label = "ina226-u69"; 284 reg = <0x46>; 285 shunt-resistor = <2000>; 286 }; 287 u66: ina226@47 { /* u66 */ 288 compatible = "ti,ina226"; 289 #io-channel-cells = <1>; 290 label = "ina226-u66"; 291 reg = <0x47>; 292 shunt-resistor = <5000>; 293 }; 294 u65: ina226@48 { /* u65 */ 295 compatible = "ti,ina226"; 296 #io-channel-cells = <1>; 297 label = "ina226-u65"; 298 reg = <0x48>; 299 shunt-resistor = <5000>; 300 }; 301 u63: ina226@49 { /* u63 */ 302 compatible = "ti,ina226"; 303 #io-channel-cells = <1>; 304 label = "ina226-u63"; 305 reg = <0x49>; 306 shunt-resistor = <5000>; 307 }; 308 u3: ina226@4a { /* u3 */ 309 compatible = "ti,ina226"; 310 #io-channel-cells = <1>; 311 label = "ina226-u3"; 312 reg = <0x4a>; 313 shunt-resistor = <5000>; 314 }; 315 u71: ina226@4b { /* u71 */ 316 compatible = "ti,ina226"; 317 #io-channel-cells = <1>; 318 label = "ina226-u71"; 319 reg = <0x4b>; 320 shunt-resistor = <5000>; 321 }; 322 u77: ina226@4c { /* u77 */ 323 compatible = "ti,ina226"; 324 #io-channel-cells = <1>; 325 label = "ina226-u77"; 326 reg = <0x4c>; 327 shunt-resistor = <5000>; 328 }; 329 u73: ina226@4d { /* u73 */ 330 compatible = "ti,ina226"; 331 #io-channel-cells = <1>; 332 label = "ina226-u73"; 333 reg = <0x4d>; 334 shunt-resistor = <5000>; 335 }; 336 u79: ina226@4e { /* u79 */ 337 compatible = "ti,ina226"; 338 #io-channel-cells = <1>; 339 label = "ina226-u79"; 340 reg = <0x4e>; 341 shunt-resistor = <5000>; 342 }; 343 }; 344 i2c@1 { 345 #address-cells = <1>; 346 #size-cells = <0>; 347 reg = <1>; 348 /* NC */ 349 }; 350 i2c@2 { 351 #address-cells = <1>; 352 #size-cells = <0>; 353 reg = <2>; 354 irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */ 355 compatible = "infineon,irps5401"; 356 reg = <0x43>; 357 }; 358 irps5401_44: irps5401@44 { /* IRPS5401 - u55 */ 359 compatible = "infineon,irps5401"; 360 reg = <0x44>; 361 }; 362 irps5401_45: irps5401@45 { /* IRPS5401 - u57 */ 363 compatible = "infineon,irps5401"; 364 reg = <0x45>; 365 }; 366 /* u68 IR38064 +0 */ 367 /* u70 IR38060 +1 */ 368 /* u74 IR38060 +2 */ 369 /* u75 IR38060 +6 */ 370 /* J19 header too */ 371 372 }; 373 i2c@3 { 374 #address-cells = <1>; 375 #size-cells = <0>; 376 reg = <3>; 377 /* SYSMON */ 378 }; 379 }; 380}; 381 382&i2c1 { 383 status = "okay"; 384 clock-frequency = <400000>; 385 pinctrl-names = "default", "gpio"; 386 pinctrl-0 = <&pinctrl_i2c1_default>; 387 pinctrl-1 = <&pinctrl_i2c1_gpio>; 388 scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 389 sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 390 391 i2c-mux@74 { /* u26 */ 392 compatible = "nxp,pca9548"; 393 #address-cells = <1>; 394 #size-cells = <0>; 395 reg = <0x74>; 396 i2c@0 { 397 #address-cells = <1>; 398 #size-cells = <0>; 399 reg = <0>; 400 /* 401 * IIC_EEPROM 1kB memory which uses 256B blocks 402 * where every block has different address. 403 * 0 - 256B address 0x54 404 * 256B - 512B address 0x55 405 * 512B - 768B address 0x56 406 * 768B - 1024B address 0x57 407 */ 408 eeprom: eeprom@54 { /* u88 */ 409 compatible = "atmel,24c08"; 410 reg = <0x54>; 411 }; 412 }; 413 i2c@1 { 414 #address-cells = <1>; 415 #size-cells = <0>; 416 reg = <1>; 417 si5341: clock-generator@36 { /* SI5341 - u46 */ 418 compatible = "silabs,si5341"; 419 reg = <0x36>; 420 #clock-cells = <2>; 421 #address-cells = <1>; 422 #size-cells = <0>; 423 clocks = <&ref48>; 424 clock-names = "xtal"; 425 clock-output-names = "si5341"; 426 427 si5341_0: out@0 { 428 /* refclk0 for PS-GT, used for DP */ 429 reg = <0>; 430 always-on; 431 }; 432 si5341_2: out@2 { 433 /* refclk2 for PS-GT, used for USB3 */ 434 reg = <2>; 435 always-on; 436 }; 437 si5341_3: out@3 { 438 /* refclk3 for PS-GT, used for SATA */ 439 reg = <3>; 440 always-on; 441 }; 442 si5341_5: out@5 { 443 /* refclk5 PL CLK100 */ 444 reg = <5>; 445 always-on; 446 }; 447 si5341_6: out@6 { 448 /* refclk6 PL CLK125 */ 449 reg = <6>; 450 always-on; 451 }; 452 si5341_9: out@9 { 453 /* refclk9 used for PS_REF_CLK 33.3 MHz */ 454 reg = <9>; 455 always-on; 456 }; 457 }; 458 }; 459 i2c@2 { 460 #address-cells = <1>; 461 #size-cells = <0>; 462 reg = <2>; 463 si570_1: clock-generator@5d { /* USER SI570 - u47 */ 464 #clock-cells = <0>; 465 compatible = "silabs,si570"; 466 reg = <0x5d>; 467 temperature-stability = <50>; 468 factory-fout = <300000000>; 469 clock-frequency = <300000000>; 470 clock-output-names = "si570_user"; 471 }; 472 }; 473 i2c@3 { 474 #address-cells = <1>; 475 #size-cells = <0>; 476 reg = <3>; 477 si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */ 478 #clock-cells = <0>; 479 compatible = "silabs,si570"; 480 reg = <0x5d>; 481 temperature-stability = <50>; 482 factory-fout = <156250000>; 483 clock-frequency = <156250000>; 484 clock-output-names = "si570_mgt"; 485 }; 486 }; 487 i2c@4 { 488 #address-cells = <1>; 489 #size-cells = <0>; 490 reg = <4>; 491 /* SI5382 - u48 */ 492 }; 493 i2c@5 { 494 #address-cells = <1>; 495 #size-cells = <0>; 496 reg = <5>; 497 sc18is603@2f { /* sc18is602 - u93 */ 498 compatible = "nxp,sc18is603"; 499 reg = <0x2f>; 500 /* 4 gpios for CS not handled by driver */ 501 /* 502 * USB2ANY cable or 503 * LMK04208 - u90 or 504 * LMX2594 - u102 or 505 * LMX2594 - u103 or 506 * LMX2594 - u104 507 */ 508 }; 509 }; 510 i2c@6 { 511 #address-cells = <1>; 512 #size-cells = <0>; 513 reg = <6>; 514 /* FMC connector */ 515 }; 516 /* 7 NC */ 517 }; 518 519 i2c-mux@75 { 520 compatible = "nxp,pca9548"; /* u27 */ 521 #address-cells = <1>; 522 #size-cells = <0>; 523 reg = <0x75>; 524 525 i2c@0 { 526 #address-cells = <1>; 527 #size-cells = <0>; 528 reg = <0>; 529 /* FMCP_HSPC_IIC */ 530 }; 531 i2c@1 { 532 #address-cells = <1>; 533 #size-cells = <0>; 534 reg = <1>; 535 /* NC */ 536 }; 537 i2c@2 { 538 #address-cells = <1>; 539 #size-cells = <0>; 540 reg = <2>; 541 /* SYSMON */ 542 }; 543 i2c@3 { 544 #address-cells = <1>; 545 #size-cells = <0>; 546 reg = <3>; 547 /* DDR4 SODIMM */ 548 }; 549 i2c@4 { 550 #address-cells = <1>; 551 #size-cells = <0>; 552 reg = <4>; 553 /* SFP3 */ 554 }; 555 i2c@5 { 556 #address-cells = <1>; 557 #size-cells = <0>; 558 reg = <5>; 559 /* SFP2 */ 560 }; 561 i2c@6 { 562 #address-cells = <1>; 563 #size-cells = <0>; 564 reg = <6>; 565 /* SFP1 */ 566 }; 567 i2c@7 { 568 #address-cells = <1>; 569 #size-cells = <0>; 570 reg = <7>; 571 /* SFP0 */ 572 }; 573 }; 574}; 575 576&pinctrl0 { 577 status = "okay"; 578 pinctrl_i2c0_default: i2c0-default { 579 mux { 580 groups = "i2c0_3_grp"; 581 function = "i2c0"; 582 }; 583 584 conf { 585 groups = "i2c0_3_grp"; 586 bias-pull-up; 587 slew-rate = <SLEW_RATE_SLOW>; 588 power-source = <IO_STANDARD_LVCMOS18>; 589 }; 590 }; 591 592 pinctrl_i2c0_gpio: i2c0-gpio-grp { 593 mux { 594 groups = "gpio0_14_grp", "gpio0_15_grp"; 595 function = "gpio0"; 596 }; 597 598 conf { 599 groups = "gpio0_14_grp", "gpio0_15_grp"; 600 slew-rate = <SLEW_RATE_SLOW>; 601 power-source = <IO_STANDARD_LVCMOS18>; 602 }; 603 }; 604 605 pinctrl_i2c1_default: i2c1-default { 606 mux { 607 groups = "i2c1_4_grp"; 608 function = "i2c1"; 609 }; 610 611 conf { 612 groups = "i2c1_4_grp"; 613 bias-pull-up; 614 slew-rate = <SLEW_RATE_SLOW>; 615 power-source = <IO_STANDARD_LVCMOS18>; 616 }; 617 }; 618 619 pinctrl_i2c1_gpio: i2c1-gpio-grp { 620 mux { 621 groups = "gpio0_16_grp", "gpio0_17_grp"; 622 function = "gpio0"; 623 }; 624 625 conf { 626 groups = "gpio0_16_grp", "gpio0_17_grp"; 627 slew-rate = <SLEW_RATE_SLOW>; 628 power-source = <IO_STANDARD_LVCMOS18>; 629 }; 630 }; 631 632 pinctrl_uart0_default: uart0-default { 633 mux { 634 groups = "uart0_4_grp"; 635 function = "uart0"; 636 }; 637 638 conf { 639 groups = "uart0_4_grp"; 640 slew-rate = <SLEW_RATE_SLOW>; 641 power-source = <IO_STANDARD_LVCMOS18>; 642 }; 643 644 conf-rx { 645 pins = "MIO18"; 646 bias-high-impedance; 647 }; 648 649 conf-tx { 650 pins = "MIO19"; 651 bias-disable; 652 }; 653 }; 654 655 pinctrl_usb0_default: usb0-default { 656 mux { 657 groups = "usb0_0_grp"; 658 function = "usb0"; 659 }; 660 661 conf { 662 groups = "usb0_0_grp"; 663 power-source = <IO_STANDARD_LVCMOS18>; 664 }; 665 666 conf-rx { 667 pins = "MIO52", "MIO53", "MIO55"; 668 bias-high-impedance; 669 drive-strength = <12>; 670 slew-rate = <SLEW_RATE_FAST>; 671 }; 672 673 conf-tx { 674 pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", 675 "MIO60", "MIO61", "MIO62", "MIO63"; 676 bias-disable; 677 drive-strength = <4>; 678 slew-rate = <SLEW_RATE_SLOW>; 679 }; 680 }; 681 682 pinctrl_gem3_default: gem3-default { 683 mux { 684 function = "ethernet3"; 685 groups = "ethernet3_0_grp"; 686 }; 687 688 conf { 689 groups = "ethernet3_0_grp"; 690 slew-rate = <SLEW_RATE_SLOW>; 691 power-source = <IO_STANDARD_LVCMOS18>; 692 }; 693 694 conf-rx { 695 pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", 696 "MIO75"; 697 bias-high-impedance; 698 low-power-disable; 699 }; 700 701 conf-tx { 702 pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", 703 "MIO69"; 704 bias-disable; 705 low-power-enable; 706 }; 707 708 mux-mdio { 709 function = "mdio3"; 710 groups = "mdio3_0_grp"; 711 }; 712 713 conf-mdio { 714 groups = "mdio3_0_grp"; 715 slew-rate = <SLEW_RATE_SLOW>; 716 power-source = <IO_STANDARD_LVCMOS18>; 717 bias-disable; 718 }; 719 }; 720 721 pinctrl_sdhci1_default: sdhci1-default { 722 mux { 723 groups = "sdio1_0_grp"; 724 function = "sdio1"; 725 }; 726 727 conf { 728 groups = "sdio1_0_grp"; 729 slew-rate = <SLEW_RATE_SLOW>; 730 power-source = <IO_STANDARD_LVCMOS18>; 731 bias-disable; 732 }; 733 734 mux-cd { 735 groups = "sdio1_cd_0_grp"; 736 function = "sdio1_cd"; 737 }; 738 739 conf-cd { 740 groups = "sdio1_cd_0_grp"; 741 bias-high-impedance; 742 bias-pull-up; 743 slew-rate = <SLEW_RATE_SLOW>; 744 power-source = <IO_STANDARD_LVCMOS18>; 745 }; 746 }; 747 748 pinctrl_gpio_default: gpio-default { 749 mux { 750 function = "gpio0"; 751 groups = "gpio0_22_grp", "gpio0_23_grp"; 752 }; 753 754 conf { 755 groups = "gpio0_22_grp", "gpio0_23_grp"; 756 slew-rate = <SLEW_RATE_SLOW>; 757 power-source = <IO_STANDARD_LVCMOS18>; 758 }; 759 760 mux-msp { 761 function = "gpio0"; 762 groups = "gpio0_13_grp", "gpio0_38_grp"; 763 }; 764 765 conf-msp { 766 groups = "gpio0_13_grp", "gpio0_38_grp"; 767 slew-rate = <SLEW_RATE_SLOW>; 768 power-source = <IO_STANDARD_LVCMOS18>; 769 }; 770 771 conf-pull-up { 772 pins = "MIO22"; 773 bias-pull-up; 774 }; 775 776 conf-pull-none { 777 pins = "MIO13", "MIO23", "MIO38"; 778 bias-disable; 779 }; 780 }; 781}; 782 783&psgtr { 784 status = "okay"; 785 /* nc, dp, usb3, sata */ 786 clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>; 787 clock-names = "ref1", "ref2", "ref3"; 788}; 789 790&qspi { 791 status = "okay"; 792 flash@0 { 793 compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ 794 #address-cells = <1>; 795 #size-cells = <1>; 796 reg = <0x0>; 797 spi-tx-bus-width = <4>; 798 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ 799 spi-max-frequency = <108000000>; /* Based on DC1 spec */ 800 }; 801}; 802 803&rtc { 804 status = "okay"; 805}; 806 807&sata { 808 status = "okay"; 809 /* SATA OOB timing settings */ 810 ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 811 ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 812 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 813 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 814 ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 815 ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 816 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 817 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 818 phy-names = "sata-phy"; 819 phys = <&psgtr 3 PHY_TYPE_SATA 1 3>; 820}; 821 822/* SD1 with level shifter */ 823&sdhci1 { 824 status = "okay"; 825 pinctrl-names = "default"; 826 pinctrl-0 = <&pinctrl_sdhci1_default>; 827 disable-wp; 828 /* 829 * This property should be removed for supporting UHS mode 830 */ 831 no-1-8-v; 832 xlnx,mio-bank = <1>; 833}; 834 835&uart0 { 836 status = "okay"; 837 pinctrl-names = "default"; 838 pinctrl-0 = <&pinctrl_uart0_default>; 839}; 840 841/* ULPI SMSC USB3320 */ 842&usb0 { 843 status = "okay"; 844 pinctrl-names = "default"; 845 pinctrl-0 = <&pinctrl_usb0_default>; 846 phy-names = "usb3-phy"; 847 phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; 848}; 849 850&dwc3_0 { 851 status = "okay"; 852 dr_mode = "host"; 853 snps,usb3_lpm_capable; 854 maximum-speed = "super-speed"; 855}; 856 857&zynqmp_dpdma { 858 status = "okay"; 859}; 860 861&zynqmp_dpsub { 862 status = "okay"; 863 phy-names = "dp-phy0", "dp-phy1"; 864 phys = <&psgtr 1 PHY_TYPE_DP 0 1>, 865 <&psgtr 0 PHY_TYPE_DP 1 1>; 866}; 867