1// SPDX-License-Identifier: GPL-2.0 2// 3// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. 4// http://www.samsung.com/ 5// 6// Copyright 2008 Openmoko, Inc. 7// Copyright 2008 Simtec Electronics 8// Ben Dooks <ben@simtec.co.uk> 9// http://armlinux.simtec.co.uk/ 10// 11// Samsung - GPIOlib support 12 13#include <linux/kernel.h> 14#include <linux/irq.h> 15#include <linux/io.h> 16#include <linux/gpio.h> 17#include <linux/init.h> 18#include <linux/spinlock.h> 19#include <linux/module.h> 20#include <linux/interrupt.h> 21#include <linux/device.h> 22#include <linux/ioport.h> 23#include <linux/of.h> 24#include <linux/slab.h> 25#include <linux/of_address.h> 26 27#include <asm/irq.h> 28 29#include "irqs.h" 30#include "map.h" 31#include "regs-gpio.h" 32#include "gpio-samsung.h" 33 34#include "cpu.h" 35#include "gpio-core.h" 36#include "gpio-cfg.h" 37#include "gpio-cfg-helpers.h" 38#include "pm.h" 39 40static int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, 41 unsigned int off, samsung_gpio_pull_t pull) 42{ 43 void __iomem *reg = chip->base + 0x08; 44 int shift = off * 2; 45 u32 pup; 46 47 pup = __raw_readl(reg); 48 pup &= ~(3 << shift); 49 pup |= pull << shift; 50 __raw_writel(pup, reg); 51 52 return 0; 53} 54 55static samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, 56 unsigned int off) 57{ 58 void __iomem *reg = chip->base + 0x08; 59 int shift = off * 2; 60 u32 pup = __raw_readl(reg); 61 62 pup >>= shift; 63 pup &= 0x3; 64 65 return (__force samsung_gpio_pull_t)pup; 66} 67 68static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip, 69 unsigned int off, unsigned int cfg) 70{ 71 void __iomem *reg = chip->base; 72 unsigned int shift = off * 2; 73 u32 con; 74 75 if (samsung_gpio_is_cfg_special(cfg)) { 76 cfg &= 0xf; 77 if (cfg > 3) 78 return -EINVAL; 79 80 cfg <<= shift; 81 } 82 83 con = __raw_readl(reg); 84 con &= ~(0x3 << shift); 85 con |= cfg; 86 __raw_writel(con, reg); 87 88 return 0; 89} 90 91/* 92 * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read. 93 * @chip: The gpio chip that is being configured. 94 * @off: The offset for the GPIO being configured. 95 * 96 * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which 97 * could be directly passed back to samsung_gpio_setcfg_2bit(), from the 98 * S3C_GPIO_SPECIAL() macro. 99 */ 100 101static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip, 102 unsigned int off) 103{ 104 u32 con; 105 106 con = __raw_readl(chip->base); 107 con >>= off * 2; 108 con &= 3; 109 110 /* this conversion works for IN and OUT as well as special mode */ 111 return S3C_GPIO_SPECIAL(con); 112} 113 114/* 115 * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config. 116 * @chip: The gpio chip that is being configured. 117 * @off: The offset for the GPIO being configured. 118 * @cfg: The configuration value to set. 119 * 120 * This helper deal with the GPIO cases where the control register has 4 bits 121 * of control per GPIO, generally in the form of: 122 * 0000 = Input 123 * 0001 = Output 124 * others = Special functions (dependent on bank) 125 * 126 * Note, since the code to deal with the case where there are two control 127 * registers instead of one, we do not have a separate set of functions for 128 * each case. 129 */ 130 131static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip, 132 unsigned int off, unsigned int cfg) 133{ 134 void __iomem *reg = chip->base; 135 unsigned int shift = (off & 7) * 4; 136 u32 con; 137 138 if (off < 8 && chip->chip.ngpio > 8) 139 reg -= 4; 140 141 if (samsung_gpio_is_cfg_special(cfg)) { 142 cfg &= 0xf; 143 cfg <<= shift; 144 } 145 146 con = __raw_readl(reg); 147 con &= ~(0xf << shift); 148 con |= cfg; 149 __raw_writel(con, reg); 150 151 return 0; 152} 153 154/* 155 * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read. 156 * @chip: The gpio chip that is being configured. 157 * @off: The offset for the GPIO being configured. 158 * 159 * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration 160 * register setting into a value the software can use, such as could be passed 161 * to samsung_gpio_setcfg_4bit(). 162 * 163 * @sa samsung_gpio_getcfg_2bit 164 */ 165 166static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip, 167 unsigned int off) 168{ 169 void __iomem *reg = chip->base; 170 unsigned int shift = (off & 7) * 4; 171 u32 con; 172 173 if (off < 8 && chip->chip.ngpio > 8) 174 reg -= 4; 175 176 con = __raw_readl(reg); 177 con >>= shift; 178 con &= 0xf; 179 180 /* this conversion works for IN and OUT as well as special mode */ 181 return S3C_GPIO_SPECIAL(con); 182} 183 184static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg, 185 int nr_chips) 186{ 187 for (; nr_chips > 0; nr_chips--, chipcfg++) { 188 if (!chipcfg->set_config) 189 chipcfg->set_config = samsung_gpio_setcfg_4bit; 190 if (!chipcfg->get_config) 191 chipcfg->get_config = samsung_gpio_getcfg_4bit; 192 if (!chipcfg->set_pull) 193 chipcfg->set_pull = samsung_gpio_setpull_updown; 194 if (!chipcfg->get_pull) 195 chipcfg->get_pull = samsung_gpio_getpull_updown; 196 } 197} 198 199static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { 200 [0] = { 201 .cfg_eint = 0x0, 202 }, 203 [1] = { 204 .cfg_eint = 0x3, 205 }, 206 [2] = { 207 .cfg_eint = 0x7, 208 }, 209 [3] = { 210 .cfg_eint = 0xF, 211 }, 212 [4] = { 213 .cfg_eint = 0x0, 214 .set_config = samsung_gpio_setcfg_2bit, 215 .get_config = samsung_gpio_getcfg_2bit, 216 }, 217 [5] = { 218 .cfg_eint = 0x2, 219 .set_config = samsung_gpio_setcfg_2bit, 220 .get_config = samsung_gpio_getcfg_2bit, 221 }, 222 [6] = { 223 .cfg_eint = 0x3, 224 .set_config = samsung_gpio_setcfg_2bit, 225 .get_config = samsung_gpio_getcfg_2bit, 226 }, 227 [7] = { 228 .set_config = samsung_gpio_setcfg_2bit, 229 .get_config = samsung_gpio_getcfg_2bit, 230 }, 231}; 232 233/* 234 * Default routines for controlling GPIO, based on the original S3C24XX 235 * GPIO functions which deal with the case where each gpio bank of the 236 * chip is as following: 237 * 238 * base + 0x00: Control register, 2 bits per gpio 239 * gpio n: 2 bits starting at (2*n) 240 * 00 = input, 01 = output, others mean special-function 241 * base + 0x04: Data register, 1 bit per gpio 242 * bit n: data bit n 243*/ 244 245static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset) 246{ 247 struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); 248 void __iomem *base = ourchip->base; 249 unsigned long flags; 250 unsigned long con; 251 252 samsung_gpio_lock(ourchip, flags); 253 254 con = __raw_readl(base + 0x00); 255 con &= ~(3 << (offset * 2)); 256 257 __raw_writel(con, base + 0x00); 258 259 samsung_gpio_unlock(ourchip, flags); 260 return 0; 261} 262 263static int samsung_gpiolib_2bit_output(struct gpio_chip *chip, 264 unsigned offset, int value) 265{ 266 struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); 267 void __iomem *base = ourchip->base; 268 unsigned long flags; 269 unsigned long dat; 270 unsigned long con; 271 272 samsung_gpio_lock(ourchip, flags); 273 274 dat = __raw_readl(base + 0x04); 275 dat &= ~(1 << offset); 276 if (value) 277 dat |= 1 << offset; 278 __raw_writel(dat, base + 0x04); 279 280 con = __raw_readl(base + 0x00); 281 con &= ~(3 << (offset * 2)); 282 con |= 1 << (offset * 2); 283 284 __raw_writel(con, base + 0x00); 285 __raw_writel(dat, base + 0x04); 286 287 samsung_gpio_unlock(ourchip, flags); 288 return 0; 289} 290 291/* 292 * The samsung_gpiolib_4bit routines are to control the gpio banks where 293 * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the 294 * following example: 295 * 296 * base + 0x00: Control register, 4 bits per gpio 297 * gpio n: 4 bits starting at (4*n) 298 * 0000 = input, 0001 = output, others mean special-function 299 * base + 0x04: Data register, 1 bit per gpio 300 * bit n: data bit n 301 * 302 * Note, since the data register is one bit per gpio and is at base + 0x4 303 * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the 304 * state of the output. 305 */ 306 307static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, 308 unsigned int offset) 309{ 310 struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); 311 void __iomem *base = ourchip->base; 312 unsigned long con; 313 314 con = __raw_readl(base + GPIOCON_OFF); 315 if (ourchip->bitmap_gpio_int & BIT(offset)) 316 con |= 0xf << con_4bit_shift(offset); 317 else 318 con &= ~(0xf << con_4bit_shift(offset)); 319 __raw_writel(con, base + GPIOCON_OFF); 320 321 pr_debug("%s: %p: CON now %08lx\n", __func__, base, con); 322 323 return 0; 324} 325 326static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, 327 unsigned int offset, int value) 328{ 329 struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); 330 void __iomem *base = ourchip->base; 331 unsigned long con; 332 unsigned long dat; 333 334 con = __raw_readl(base + GPIOCON_OFF); 335 con &= ~(0xf << con_4bit_shift(offset)); 336 con |= 0x1 << con_4bit_shift(offset); 337 338 dat = __raw_readl(base + GPIODAT_OFF); 339 340 if (value) 341 dat |= 1 << offset; 342 else 343 dat &= ~(1 << offset); 344 345 __raw_writel(dat, base + GPIODAT_OFF); 346 __raw_writel(con, base + GPIOCON_OFF); 347 __raw_writel(dat, base + GPIODAT_OFF); 348 349 pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); 350 351 return 0; 352} 353 354/* 355 * The next set of routines are for the case where the GPIO configuration 356 * registers are 4 bits per GPIO but there is more than one register (the 357 * bank has more than 8 GPIOs. 358 * 359 * This case is the similar to the 4 bit case, but the registers are as 360 * follows: 361 * 362 * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) 363 * gpio n: 4 bits starting at (4*n) 364 * 0000 = input, 0001 = output, others mean special-function 365 * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) 366 * gpio n: 4 bits starting at (4*n) 367 * 0000 = input, 0001 = output, others mean special-function 368 * base + 0x08: Data register, 1 bit per gpio 369 * bit n: data bit n 370 * 371 * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set 372 * routines we store the 'base + 0x4' address so that these routines see 373 * the data register at ourchip->base + 0x04. 374 */ 375 376static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, 377 unsigned int offset) 378{ 379 struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); 380 void __iomem *base = ourchip->base; 381 void __iomem *regcon = base; 382 unsigned long con; 383 384 if (offset > 7) 385 offset -= 8; 386 else 387 regcon -= 4; 388 389 con = __raw_readl(regcon); 390 con &= ~(0xf << con_4bit_shift(offset)); 391 __raw_writel(con, regcon); 392 393 pr_debug("%s: %p: CON %08lx\n", __func__, base, con); 394 395 return 0; 396} 397 398static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, 399 unsigned int offset, int value) 400{ 401 struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); 402 void __iomem *base = ourchip->base; 403 void __iomem *regcon = base; 404 unsigned long con; 405 unsigned long dat; 406 unsigned con_offset = offset; 407 408 if (con_offset > 7) 409 con_offset -= 8; 410 else 411 regcon -= 4; 412 413 con = __raw_readl(regcon); 414 con &= ~(0xf << con_4bit_shift(con_offset)); 415 con |= 0x1 << con_4bit_shift(con_offset); 416 417 dat = __raw_readl(base + GPIODAT_OFF); 418 419 if (value) 420 dat |= 1 << offset; 421 else 422 dat &= ~(1 << offset); 423 424 __raw_writel(dat, base + GPIODAT_OFF); 425 __raw_writel(con, regcon); 426 __raw_writel(dat, base + GPIODAT_OFF); 427 428 pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); 429 430 return 0; 431} 432 433static void samsung_gpiolib_set(struct gpio_chip *chip, 434 unsigned offset, int value) 435{ 436 struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); 437 void __iomem *base = ourchip->base; 438 unsigned long flags; 439 unsigned long dat; 440 441 samsung_gpio_lock(ourchip, flags); 442 443 dat = __raw_readl(base + 0x04); 444 dat &= ~(1 << offset); 445 if (value) 446 dat |= 1 << offset; 447 __raw_writel(dat, base + 0x04); 448 449 samsung_gpio_unlock(ourchip, flags); 450} 451 452static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset) 453{ 454 struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); 455 unsigned long val; 456 457 val = __raw_readl(ourchip->base + 0x04); 458 val >>= offset; 459 val &= 1; 460 461 return val; 462} 463 464/* 465 * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios 466 * for use with the configuration calls, and other parts of the s3c gpiolib 467 * support code. 468 * 469 * Not all s3c support code will need this, as some configurations of cpu 470 * may only support one or two different configuration options and have an 471 * easy gpio to samsung_gpio_chip mapping function. If this is the case, then 472 * the machine support file should provide its own samsung_gpiolib_getchip() 473 * and any other necessary functions. 474 */ 475 476#ifdef CONFIG_S3C_GPIO_TRACK 477struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; 478 479static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip) 480{ 481 unsigned int gpn; 482 int i; 483 484 gpn = chip->chip.base; 485 for (i = 0; i < chip->chip.ngpio; i++, gpn++) { 486 BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); 487 s3c_gpios[gpn] = chip; 488 } 489} 490#endif /* CONFIG_S3C_GPIO_TRACK */ 491 492/* 493 * samsung_gpiolib_add() - add the Samsung gpio_chip. 494 * @chip: The chip to register 495 * 496 * This is a wrapper to gpiochip_add() that takes our specific gpio chip 497 * information and makes the necessary alterations for the platform and 498 * notes the information for use with the configuration systems and any 499 * other parts of the system. 500 */ 501 502static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) 503{ 504 struct gpio_chip *gc = &chip->chip; 505 int ret; 506 507 BUG_ON(!chip->base); 508 BUG_ON(!gc->label); 509 BUG_ON(!gc->ngpio); 510 511 spin_lock_init(&chip->lock); 512 513 if (!gc->direction_input) 514 gc->direction_input = samsung_gpiolib_2bit_input; 515 if (!gc->direction_output) 516 gc->direction_output = samsung_gpiolib_2bit_output; 517 if (!gc->set) 518 gc->set = samsung_gpiolib_set; 519 if (!gc->get) 520 gc->get = samsung_gpiolib_get; 521 522#ifdef CONFIG_PM 523 if (chip->pm != NULL) { 524 if (!chip->pm->save || !chip->pm->resume) 525 pr_err("gpio: %s has missing PM functions\n", 526 gc->label); 527 } else 528 pr_err("gpio: %s has no PM function\n", gc->label); 529#endif 530 531 /* gpiochip_add() prints own failure message on error. */ 532 ret = gpiochip_add_data(gc, chip); 533 if (ret >= 0) 534 s3c_gpiolib_track(chip); 535} 536 537static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip, 538 int nr_chips, void __iomem *base, 539 unsigned int offset) 540{ 541 int i; 542 543 for (i = 0 ; i < nr_chips; i++, chip++) { 544 chip->chip.direction_input = samsung_gpiolib_2bit_input; 545 chip->chip.direction_output = samsung_gpiolib_2bit_output; 546 547 if (!chip->config) 548 chip->config = &samsung_gpio_cfgs[7]; 549 if (!chip->pm) 550 chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); 551 if ((base != NULL) && (chip->base == NULL)) 552 chip->base = base + ((i) * offset); 553 554 samsung_gpiolib_add(chip); 555 } 556} 557 558/* 559 * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. 560 * @chip: The gpio chip that is being configured. 561 * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. 562 * 563 * This helper deal with the GPIO cases where the control register has 4 bits 564 * of control per GPIO, generally in the form of: 565 * 0000 = Input 566 * 0001 = Output 567 * others = Special functions (dependent on bank) 568 * 569 * Note, since the code to deal with the case where there are two control 570 * registers instead of one, we do not have a separate set of function 571 * (samsung_gpiolib_add_4bit2_chips)for each case. 572 */ 573 574static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip, 575 int nr_chips, void __iomem *base) 576{ 577 int i; 578 579 for (i = 0 ; i < nr_chips; i++, chip++) { 580 chip->chip.direction_input = samsung_gpiolib_4bit_input; 581 chip->chip.direction_output = samsung_gpiolib_4bit_output; 582 583 if (!chip->config) 584 chip->config = &samsung_gpio_cfgs[2]; 585 if (!chip->pm) 586 chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); 587 if ((base != NULL) && (chip->base == NULL)) 588 chip->base = base + ((i) * 0x20); 589 590 chip->bitmap_gpio_int = 0; 591 592 samsung_gpiolib_add(chip); 593 } 594} 595 596static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip, 597 int nr_chips) 598{ 599 for (; nr_chips > 0; nr_chips--, chip++) { 600 chip->chip.direction_input = samsung_gpiolib_4bit2_input; 601 chip->chip.direction_output = samsung_gpiolib_4bit2_output; 602 603 if (!chip->config) 604 chip->config = &samsung_gpio_cfgs[2]; 605 if (!chip->pm) 606 chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); 607 608 samsung_gpiolib_add(chip); 609 } 610} 611 612int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) 613{ 614 struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip); 615 616 return samsung_chip->irq_base + offset; 617} 618 619static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin) 620{ 621 return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; 622} 623 624static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin) 625{ 626 return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; 627} 628 629/* 630 * GPIO bank summary: 631 * 632 * Bank GPIOs Style SlpCon ExtInt Group 633 * A 8 4Bit Yes 1 634 * B 7 4Bit Yes 1 635 * C 8 4Bit Yes 2 636 * D 5 4Bit Yes 3 637 * E 5 4Bit Yes None 638 * F 16 2Bit Yes 4 [1] 639 * G 7 4Bit Yes 5 640 * H 10 4Bit[2] Yes 6 641 * I 16 2Bit Yes None 642 * J 12 2Bit Yes None 643 * K 16 4Bit[2] No None 644 * L 15 4Bit[2] No None 645 * M 6 4Bit No IRQ_EINT 646 * N 16 2Bit No IRQ_EINT 647 * O 16 2Bit Yes 7 648 * P 15 2Bit Yes 8 649 * Q 9 2Bit Yes 9 650 * 651 * [1] BANKF pins 14,15 do not form part of the external interrupt sources 652 * [2] BANK has two control registers, GPxCON0 and GPxCON1 653 */ 654 655static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = { 656 { 657 .chip = { 658 .base = S3C64XX_GPA(0), 659 .ngpio = S3C64XX_GPIO_A_NR, 660 .label = "GPA", 661 }, 662 }, { 663 .chip = { 664 .base = S3C64XX_GPB(0), 665 .ngpio = S3C64XX_GPIO_B_NR, 666 .label = "GPB", 667 }, 668 }, { 669 .chip = { 670 .base = S3C64XX_GPC(0), 671 .ngpio = S3C64XX_GPIO_C_NR, 672 .label = "GPC", 673 }, 674 }, { 675 .chip = { 676 .base = S3C64XX_GPD(0), 677 .ngpio = S3C64XX_GPIO_D_NR, 678 .label = "GPD", 679 }, 680 }, { 681 .config = &samsung_gpio_cfgs[0], 682 .chip = { 683 .base = S3C64XX_GPE(0), 684 .ngpio = S3C64XX_GPIO_E_NR, 685 .label = "GPE", 686 }, 687 }, { 688 .base = S3C64XX_GPG_BASE, 689 .chip = { 690 .base = S3C64XX_GPG(0), 691 .ngpio = S3C64XX_GPIO_G_NR, 692 .label = "GPG", 693 }, 694 }, { 695 .base = S3C64XX_GPM_BASE, 696 .config = &samsung_gpio_cfgs[1], 697 .chip = { 698 .base = S3C64XX_GPM(0), 699 .ngpio = S3C64XX_GPIO_M_NR, 700 .label = "GPM", 701 .to_irq = s3c64xx_gpiolib_mbank_to_irq, 702 }, 703 }, 704}; 705 706static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = { 707 { 708 .base = S3C64XX_GPH_BASE + 0x4, 709 .chip = { 710 .base = S3C64XX_GPH(0), 711 .ngpio = S3C64XX_GPIO_H_NR, 712 .label = "GPH", 713 }, 714 }, { 715 .base = S3C64XX_GPK_BASE + 0x4, 716 .config = &samsung_gpio_cfgs[0], 717 .chip = { 718 .base = S3C64XX_GPK(0), 719 .ngpio = S3C64XX_GPIO_K_NR, 720 .label = "GPK", 721 }, 722 }, { 723 .base = S3C64XX_GPL_BASE + 0x4, 724 .config = &samsung_gpio_cfgs[1], 725 .chip = { 726 .base = S3C64XX_GPL(0), 727 .ngpio = S3C64XX_GPIO_L_NR, 728 .label = "GPL", 729 .to_irq = s3c64xx_gpiolib_lbank_to_irq, 730 }, 731 }, 732}; 733 734static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { 735 { 736 .base = S3C64XX_GPF_BASE, 737 .config = &samsung_gpio_cfgs[6], 738 .chip = { 739 .base = S3C64XX_GPF(0), 740 .ngpio = S3C64XX_GPIO_F_NR, 741 .label = "GPF", 742 }, 743 }, { 744 .config = &samsung_gpio_cfgs[7], 745 .chip = { 746 .base = S3C64XX_GPI(0), 747 .ngpio = S3C64XX_GPIO_I_NR, 748 .label = "GPI", 749 }, 750 }, { 751 .config = &samsung_gpio_cfgs[7], 752 .chip = { 753 .base = S3C64XX_GPJ(0), 754 .ngpio = S3C64XX_GPIO_J_NR, 755 .label = "GPJ", 756 }, 757 }, { 758 .config = &samsung_gpio_cfgs[6], 759 .chip = { 760 .base = S3C64XX_GPO(0), 761 .ngpio = S3C64XX_GPIO_O_NR, 762 .label = "GPO", 763 }, 764 }, { 765 .config = &samsung_gpio_cfgs[6], 766 .chip = { 767 .base = S3C64XX_GPP(0), 768 .ngpio = S3C64XX_GPIO_P_NR, 769 .label = "GPP", 770 }, 771 }, { 772 .config = &samsung_gpio_cfgs[6], 773 .chip = { 774 .base = S3C64XX_GPQ(0), 775 .ngpio = S3C64XX_GPIO_Q_NR, 776 .label = "GPQ", 777 }, 778 }, { 779 .base = S3C64XX_GPN_BASE, 780 .irq_base = IRQ_EINT(0), 781 .config = &samsung_gpio_cfgs[5], 782 .chip = { 783 .base = S3C64XX_GPN(0), 784 .ngpio = S3C64XX_GPIO_N_NR, 785 .label = "GPN", 786 .to_irq = samsung_gpiolib_to_irq, 787 }, 788 }, 789}; 790 791/* TODO: cleanup soc_is_* */ 792static __init int samsung_gpiolib_init(void) 793{ 794 /* 795 * Currently there are two drivers that can provide GPIO support for 796 * Samsung SoCs. For device tree enabled platforms, the new 797 * pinctrl-samsung driver is used, providing both GPIO and pin control 798 * interfaces. For legacy (non-DT) platforms this driver is used. 799 */ 800 if (of_have_populated_dt()) 801 return 0; 802 803 if (soc_is_s3c64xx()) { 804 samsung_gpiolib_set_cfg(samsung_gpio_cfgs, 805 ARRAY_SIZE(samsung_gpio_cfgs)); 806 samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit, 807 ARRAY_SIZE(s3c64xx_gpios_2bit), 808 S3C64XX_VA_GPIO + 0xE0, 0x20); 809 samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit, 810 ARRAY_SIZE(s3c64xx_gpios_4bit), 811 S3C64XX_VA_GPIO); 812 samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, 813 ARRAY_SIZE(s3c64xx_gpios_4bit2)); 814 } 815 816 return 0; 817} 818core_initcall(samsung_gpiolib_init); 819 820int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) 821{ 822 struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); 823 unsigned long flags; 824 int offset; 825 int ret; 826 827 if (!chip) 828 return -EINVAL; 829 830 offset = pin - chip->chip.base; 831 832 samsung_gpio_lock(chip, flags); 833 ret = samsung_gpio_do_setcfg(chip, offset, config); 834 samsung_gpio_unlock(chip, flags); 835 836 return ret; 837} 838EXPORT_SYMBOL(s3c_gpio_cfgpin); 839 840int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, 841 unsigned int cfg) 842{ 843 int ret; 844 845 for (; nr > 0; nr--, start++) { 846 ret = s3c_gpio_cfgpin(start, cfg); 847 if (ret != 0) 848 return ret; 849 } 850 851 return 0; 852} 853EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); 854 855int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, 856 unsigned int cfg, samsung_gpio_pull_t pull) 857{ 858 int ret; 859 860 for (; nr > 0; nr--, start++) { 861 s3c_gpio_setpull(start, pull); 862 ret = s3c_gpio_cfgpin(start, cfg); 863 if (ret != 0) 864 return ret; 865 } 866 867 return 0; 868} 869EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); 870 871int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull) 872{ 873 struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); 874 unsigned long flags; 875 int offset, ret; 876 877 if (!chip) 878 return -EINVAL; 879 880 offset = pin - chip->chip.base; 881 882 samsung_gpio_lock(chip, flags); 883 ret = samsung_gpio_do_setpull(chip, offset, pull); 884 samsung_gpio_unlock(chip, flags); 885 886 return ret; 887} 888EXPORT_SYMBOL(s3c_gpio_setpull); 889