1/* SPDX-License-Identifier: GPL-2.0-only */ 2#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H 3#define __ARCH_ARM_MACH_OMAP2_SDRC_H 4 5/* 6 * OMAP2/3 SDRC/SMS macros and prototypes 7 * 8 * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc. 9 * Copyright (C) 2007-2008 Nokia Corporation 10 * 11 * Paul Walmsley 12 * Tony Lindgren 13 * Richard Woodruff 14 */ 15#undef DEBUG 16 17#ifndef __ASSEMBLER__ 18 19#include <linux/io.h> 20 21extern void __iomem *omap2_sdrc_base; 22extern void __iomem *omap2_sms_base; 23 24#define OMAP_SDRC_REGADDR(reg) (omap2_sdrc_base + (reg)) 25#define OMAP_SMS_REGADDR(reg) (omap2_sms_base + (reg)) 26 27/* SDRC global register get/set */ 28 29static inline void sdrc_write_reg(u32 val, u16 reg) 30{ 31 writel_relaxed(val, OMAP_SDRC_REGADDR(reg)); 32} 33 34static inline u32 sdrc_read_reg(u16 reg) 35{ 36 return readl_relaxed(OMAP_SDRC_REGADDR(reg)); 37} 38 39/* SMS global register get/set */ 40 41static inline void sms_write_reg(u32 val, u16 reg) 42{ 43 writel_relaxed(val, OMAP_SMS_REGADDR(reg)); 44} 45 46static inline u32 sms_read_reg(u16 reg) 47{ 48 return readl_relaxed(OMAP_SMS_REGADDR(reg)); 49} 50 51extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms); 52 53 54/** 55 * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate 56 * @rate: SDRC clock rate (in Hz) 57 * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate 58 * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate 59 * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate 60 * @mr: Value to program to SDRC_MR for this rate 61 * 62 * This structure holds a pre-computed set of register values for the 63 * SDRC for a given SDRC clock rate and SDRAM chip. These are 64 * intended to be pre-computed and specified in an array in the board-*.c 65 * files. The structure is keyed off the 'rate' field. 66 */ 67struct omap_sdrc_params { 68 unsigned long rate; 69 u32 actim_ctrla; 70 u32 actim_ctrlb; 71 u32 rfr_ctrl; 72 u32 mr; 73}; 74 75#ifdef CONFIG_SOC_HAS_OMAP2_SDRC 76void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, 77 struct omap_sdrc_params *sdrc_cs1); 78#else 79static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, 80 struct omap_sdrc_params *sdrc_cs1) {}; 81#endif 82 83void omap2_sms_restore_context(void); 84 85struct memory_timings { 86 u32 m_type; /* ddr = 1, sdr = 0 */ 87 u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ 88 u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ 89 u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ 90 u32 base_cs; /* base chip select to use for calculations */ 91}; 92 93extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); 94 95u32 omap2xxx_sdrc_dll_is_unlocked(void); 96u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); 97 98 99#else 100#define OMAP242X_SDRC_REGADDR(reg) \ 101 OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) 102#define OMAP243X_SDRC_REGADDR(reg) \ 103 OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) 104#define OMAP34XX_SDRC_REGADDR(reg) \ 105 OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) 106 107#endif /* __ASSEMBLER__ */ 108 109/* Minimum frequency that the SDRC DLL can lock at */ 110#define MIN_SDRC_DLL_LOCK_FREQ 83000000 111 112/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */ 113#define SDRC_MPURATE_SCALE 8 114 115/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */ 116#define SDRC_MPURATE_BASE_SHIFT 9 117 118/* 119 * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at 120 * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize 121 */ 122#define SDRC_MPURATE_LOOPS 96 123 124/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ 125 126#define SDRC_SYSCONFIG 0x010 127#define SDRC_CS_CFG 0x040 128#define SDRC_SHARING 0x044 129#define SDRC_ERR_TYPE 0x04C 130#define SDRC_DLLA_CTRL 0x060 131#define SDRC_DLLA_STATUS 0x064 132#define SDRC_DLLB_CTRL 0x068 133#define SDRC_DLLB_STATUS 0x06C 134#define SDRC_POWER 0x070 135#define SDRC_MCFG_0 0x080 136#define SDRC_MR_0 0x084 137#define SDRC_EMR2_0 0x08c 138#define SDRC_ACTIM_CTRL_A_0 0x09c 139#define SDRC_ACTIM_CTRL_B_0 0x0a0 140#define SDRC_RFR_CTRL_0 0x0a4 141#define SDRC_MANUAL_0 0x0a8 142#define SDRC_MCFG_1 0x0B0 143#define SDRC_MR_1 0x0B4 144#define SDRC_EMR2_1 0x0BC 145#define SDRC_ACTIM_CTRL_A_1 0x0C4 146#define SDRC_ACTIM_CTRL_B_1 0x0C8 147#define SDRC_RFR_CTRL_1 0x0D4 148#define SDRC_MANUAL_1 0x0D8 149 150#define SDRC_POWER_AUTOCOUNT_SHIFT 8 151#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) 152#define SDRC_POWER_CLKCTRL_SHIFT 4 153#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) 154#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) 155 156/* 157 * These values represent the number of memory clock cycles between 158 * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 159 * rows per device, and include a subtraction of a 50 cycle window in the 160 * event that the autorefresh command is delayed due to other SDRC activity. 161 * The '| 1' sets the ARE field to send one autorefresh when the autorefresh 162 * counter reaches 0. 163 * 164 * These represent optimal values for common parts, it won't work for all. 165 * As long as you scale down, most parameters are still work, they just 166 * become sub-optimal. The RFR value goes in the opposite direction. If you 167 * don't adjust it down as your clock period increases the refresh interval 168 * will not be met. Setting all parameters for complete worst case may work, 169 * but may cut memory performance by 2x. Due to errata the DLLs need to be 170 * unlocked and their value needs run time calibration. A dynamic call is 171 * need for that as no single right value exists across production samples. 172 * 173 * Only the FULL speed values are given. Current code is such that rate 174 * changes must be made at DPLLoutx2. The actual value adjustment for low 175 * frequency operation will be handled by omap_set_performance() 176 * 177 * By having the boot loader boot up in the fastest L4 speed available likely 178 * will result in something which you can switch between. 179 */ 180#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) 181#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) 182#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) 183#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ 184#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ 185 186 187/* 188 * SMS register access 189 */ 190 191#define OMAP242X_SMS_REGADDR(reg) \ 192 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) 193#define OMAP243X_SMS_REGADDR(reg) \ 194 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) 195#define OMAP343X_SMS_REGADDR(reg) \ 196 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) 197 198/* SMS register offsets - read/write with sms_{read,write}_reg() */ 199 200#define SMS_SYSCONFIG 0x010 201/* REVISIT: fill in other SMS registers here */ 202 203 204 205#endif 206