1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 *  linux/arch/arm/mach-omap2/clock.c
4 *
5 *  Copyright (C) 2005-2008 Texas Instruments, Inc.
6 *  Copyright (C) 2004-2010 Nokia Corporation
7 *
8 *  Contacts:
9 *  Richard Woodruff <r-woodruff2@ti.com>
10 *  Paul Walmsley
11 */
12#undef DEBUG
13
14#include <linux/kernel.h>
15#include <linux/export.h>
16#include <linux/list.h>
17#include <linux/errno.h>
18#include <linux/err.h>
19#include <linux/delay.h>
20#include <linux/clk.h>
21#include <linux/clk-provider.h>
22#include <linux/io.h>
23#include <linux/bitops.h>
24#include <linux/of_address.h>
25#include <asm/cpu.h>
26
27#include <trace/events/power.h>
28
29#include "soc.h"
30#include "clockdomain.h"
31#include "clock.h"
32#include "cm.h"
33#include "cm2xxx.h"
34#include "cm3xxx.h"
35#include "cm-regbits-24xx.h"
36#include "cm-regbits-34xx.h"
37#include "common.h"
38
39/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
40#define OMAP3430_DPLL_FINT_BAND1_MIN	750000
41#define OMAP3430_DPLL_FINT_BAND1_MAX	2100000
42#define OMAP3430_DPLL_FINT_BAND2_MIN	7500000
43#define OMAP3430_DPLL_FINT_BAND2_MAX	21000000
44
45/*
46 * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
47 * From device data manual section 4.3 "DPLL and DLL Specifications".
48 */
49#define OMAP3PLUS_DPLL_FINT_MIN		32000
50#define OMAP3PLUS_DPLL_FINT_MAX		52000000
51
52struct ti_clk_ll_ops omap_clk_ll_ops = {
53	.clkdm_clk_enable = clkdm_clk_enable,
54	.clkdm_clk_disable = clkdm_clk_disable,
55	.clkdm_lookup = clkdm_lookup,
56	.cm_wait_module_ready = omap_cm_wait_module_ready,
57	.cm_split_idlest_reg = cm_split_idlest_reg,
58};
59
60/**
61 * omap2_clk_setup_ll_ops - setup clock driver low-level ops
62 *
63 * Sets up clock driver low-level platform ops. These are needed
64 * for register accesses and various other misc platform operations.
65 * Returns 0 on success, -EBUSY if low level ops have been registered
66 * already.
67 */
68int __init omap2_clk_setup_ll_ops(void)
69{
70	return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
71}
72
73/*
74 * OMAP2+ specific clock functions
75 */
76
77/**
78 * ti_clk_init_features - init clock features struct for the SoC
79 *
80 * Initializes the clock features struct based on the SoC type.
81 */
82void __init ti_clk_init_features(void)
83{
84	struct ti_clk_features features = { 0 };
85	/* Fint setup for DPLLs */
86	if (cpu_is_omap3430()) {
87		features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
88		features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
89		features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
90		features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
91	} else {
92		features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
93		features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
94	}
95
96	/* Bypass value setup for DPLLs */
97	if (cpu_is_omap24xx()) {
98		features.dpll_bypass_vals |=
99			(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
100			(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
101	} else if (cpu_is_omap34xx()) {
102		features.dpll_bypass_vals |=
103			(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
104			(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
105	} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
106		   soc_is_omap54xx() || soc_is_dra7xx()) {
107		features.dpll_bypass_vals |=
108			(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
109			(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
110			(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
111	}
112
113	/* Jitter correction only available on OMAP343X */
114	if (cpu_is_omap343x())
115		features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
116
117	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
118		features.flags |= TI_CLK_DEVICE_TYPE_GP;
119
120	/* Idlest value for interface clocks.
121	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
122	 * 34xx reverses this, just to keep us on our toes
123	 * AM35xx uses both, depending on the module.
124	 */
125	if (cpu_is_omap24xx())
126		features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
127	else if (cpu_is_omap34xx())
128		features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
129
130	/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
131	if (omap_rev() == OMAP3430_REV_ES1_0)
132		features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
133
134	/* Errata I810 for omap5 / dra7 */
135	if (soc_is_omap54xx() || soc_is_dra7xx())
136		features.flags |= TI_CLK_ERRATA_I810;
137
138	ti_clk_setup_features(&features);
139}
140