1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * linux/arch/arm/mach-omap1/board-palmte.c 4 * 5 * Modified from board-generic.c 6 * 7 * Support for the Palm Tungsten E PDA. 8 * 9 * Original version : Laurent Gonzalez 10 * 11 * Maintainers : http://palmtelinux.sf.net 12 * palmtelinux-developpers@lists.sf.net 13 * 14 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> 15 */ 16#include <linux/gpio/machine.h> 17#include <linux/gpio/consumer.h> 18#include <linux/kernel.h> 19#include <linux/init.h> 20#include <linux/input.h> 21#include <linux/platform_device.h> 22#include <linux/mtd/mtd.h> 23#include <linux/mtd/partitions.h> 24#include <linux/mtd/physmap.h> 25#include <linux/spi/spi.h> 26#include <linux/interrupt.h> 27#include <linux/apm-emulation.h> 28#include <linux/omapfb.h> 29#include <linux/omap-dma.h> 30#include <linux/platform_data/keypad-omap.h> 31#include <linux/platform_data/omap1_bl.h> 32 33#include <asm/mach-types.h> 34#include <asm/mach/arch.h> 35#include <asm/mach/map.h> 36 37#include "tc.h" 38#include "flash.h" 39#include "mux.h" 40#include "hardware.h" 41#include "usb.h" 42#include "mmc.h" 43#include "common.h" 44 45#define PALMTE_USBDETECT_GPIO 0 46#define PALMTE_USB_OR_DC_GPIO 1 47#define PALMTE_TSC_GPIO 4 48#define PALMTE_PINTDAV_GPIO 6 49#define PALMTE_MMC_WP_GPIO 8 50#define PALMTE_MMC_POWER_GPIO 9 51#define PALMTE_HDQ_GPIO 11 52#define PALMTE_HEADPHONES_GPIO 14 53#define PALMTE_SPEAKER_GPIO 15 54 55static const unsigned int palmte_keymap[] = { 56 KEY(0, 0, KEY_F1), /* Calendar */ 57 KEY(1, 0, KEY_F2), /* Contacts */ 58 KEY(2, 0, KEY_F3), /* Tasks List */ 59 KEY(3, 0, KEY_F4), /* Note Pad */ 60 KEY(4, 0, KEY_POWER), 61 KEY(0, 1, KEY_LEFT), 62 KEY(1, 1, KEY_DOWN), 63 KEY(2, 1, KEY_UP), 64 KEY(3, 1, KEY_RIGHT), 65 KEY(4, 1, KEY_ENTER), 66}; 67 68static const struct matrix_keymap_data palmte_keymap_data = { 69 .keymap = palmte_keymap, 70 .keymap_size = ARRAY_SIZE(palmte_keymap), 71}; 72 73static struct omap_kp_platform_data palmte_kp_data = { 74 .rows = 8, 75 .cols = 8, 76 .keymap_data = &palmte_keymap_data, 77 .rep = true, 78 .delay = 12, 79}; 80 81static struct resource palmte_kp_resources[] = { 82 [0] = { 83 .start = INT_KEYBOARD, 84 .end = INT_KEYBOARD, 85 .flags = IORESOURCE_IRQ, 86 }, 87}; 88 89static struct platform_device palmte_kp_device = { 90 .name = "omap-keypad", 91 .id = -1, 92 .dev = { 93 .platform_data = &palmte_kp_data, 94 }, 95 .num_resources = ARRAY_SIZE(palmte_kp_resources), 96 .resource = palmte_kp_resources, 97}; 98 99static struct mtd_partition palmte_rom_partitions[] = { 100 /* PalmOS "Small ROM", contains the bootloader and the debugger */ 101 { 102 .name = "smallrom", 103 .offset = 0, 104 .size = 0xa000, 105 .mask_flags = MTD_WRITEABLE, 106 }, 107 /* PalmOS "Big ROM", a filesystem with all the OS code and data */ 108 { 109 .name = "bigrom", 110 .offset = SZ_128K, 111 /* 112 * 0x5f0000 bytes big in the multi-language ("EFIGS") version, 113 * 0x7b0000 bytes in the English-only ("enUS") version. 114 */ 115 .size = 0x7b0000, 116 .mask_flags = MTD_WRITEABLE, 117 }, 118}; 119 120static struct physmap_flash_data palmte_rom_data = { 121 .width = 2, 122 .set_vpp = omap1_set_vpp, 123 .parts = palmte_rom_partitions, 124 .nr_parts = ARRAY_SIZE(palmte_rom_partitions), 125}; 126 127static struct resource palmte_rom_resource = { 128 .start = OMAP_CS0_PHYS, 129 .end = OMAP_CS0_PHYS + SZ_8M - 1, 130 .flags = IORESOURCE_MEM, 131}; 132 133static struct platform_device palmte_rom_device = { 134 .name = "physmap-flash", 135 .id = -1, 136 .dev = { 137 .platform_data = &palmte_rom_data, 138 }, 139 .num_resources = 1, 140 .resource = &palmte_rom_resource, 141}; 142 143static struct platform_device palmte_lcd_device = { 144 .name = "lcd_palmte", 145 .id = -1, 146}; 147 148static struct omap_backlight_config palmte_backlight_config = { 149 .default_intensity = 0xa0, 150}; 151 152static struct platform_device palmte_backlight_device = { 153 .name = "omap-bl", 154 .id = -1, 155 .dev = { 156 .platform_data = &palmte_backlight_config, 157 }, 158}; 159 160static struct platform_device *palmte_devices[] __initdata = { 161 &palmte_rom_device, 162 &palmte_kp_device, 163 &palmte_lcd_device, 164 &palmte_backlight_device, 165}; 166 167static struct omap_usb_config palmte_usb_config __initdata = { 168 .register_dev = 1, /* Mini-B only receptacle */ 169 .hmc_mode = 0, 170 .pins[0] = 2, 171}; 172 173static const struct omap_lcd_config palmte_lcd_config __initconst = { 174 .ctrl_name = "internal", 175}; 176 177static struct spi_board_info palmte_spi_info[] __initdata = { 178 { 179 .modalias = "tsc2102", 180 .bus_num = 2, /* uWire (officially) */ 181 .chip_select = 0, /* As opposed to 3 */ 182 .max_speed_hz = 8000000, 183 }, 184}; 185 186#if IS_ENABLED(CONFIG_MMC_OMAP) 187 188static struct omap_mmc_platform_data _palmte_mmc_config = { 189 .nr_slots = 1, 190 .slots[0] = { 191 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, 192 .name = "mmcblk", 193 }, 194}; 195 196static struct omap_mmc_platform_data *palmte_mmc_config[OMAP15XX_NR_MMC] = { 197 [0] = &_palmte_mmc_config, 198}; 199 200static void palmte_mmc_init(void) 201{ 202 omap1_init_mmc(palmte_mmc_config, OMAP15XX_NR_MMC); 203} 204 205#else /* CONFIG_MMC_OMAP */ 206 207static void palmte_mmc_init(void) 208{ 209} 210 211#endif /* CONFIG_MMC_OMAP */ 212 213static struct gpiod_lookup_table palmte_irq_gpio_table = { 214 .dev_id = NULL, 215 .table = { 216 /* GPIO used for TSC2102 PINTDAV IRQ */ 217 GPIO_LOOKUP("gpio-0-15", PALMTE_PINTDAV_GPIO, "tsc2102_irq", 218 GPIO_ACTIVE_HIGH), 219 /* GPIO used for USB or DC input detection */ 220 GPIO_LOOKUP("gpio-0-15", PALMTE_USB_OR_DC_GPIO, "usb_dc_irq", 221 GPIO_ACTIVE_HIGH), 222 { } 223 }, 224}; 225 226static void __init omap_palmte_init(void) 227{ 228 struct gpio_desc *d; 229 230 /* mux pins for uarts */ 231 omap_cfg_reg(UART1_TX); 232 omap_cfg_reg(UART1_RTS); 233 omap_cfg_reg(UART2_TX); 234 omap_cfg_reg(UART2_RTS); 235 omap_cfg_reg(UART3_TX); 236 omap_cfg_reg(UART3_RX); 237 238 platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); 239 240 gpiod_add_lookup_table(&palmte_irq_gpio_table); 241 d = gpiod_get(NULL, "tsc2102_irq", GPIOD_IN); 242 if (IS_ERR(d)) 243 pr_err("Unable to get TSC2102 IRQ GPIO descriptor\n"); 244 else 245 palmte_spi_info[0].irq = gpiod_to_irq(d); 246 spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); 247 248 /* We are getting this just to set it up as input */ 249 d = gpiod_get(NULL, "usb_dc_irq", GPIOD_IN); 250 if (IS_ERR(d)) 251 pr_err("Unable to get USB/DC IRQ GPIO descriptor\n"); 252 else 253 gpiod_put(d); 254 255 omap_serial_init(); 256 omap1_usb_init(&palmte_usb_config); 257 omap_register_i2c_bus(1, 100, NULL, 0); 258 259 omapfb_set_lcd_config(&palmte_lcd_config); 260 palmte_mmc_init(); 261} 262 263MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") 264 .atag_offset = 0x100, 265 .map_io = omap1_map_io, 266 .init_early = omap1_init_early, 267 .init_irq = omap1_init_irq, 268 .init_machine = omap_palmte_init, 269 .init_late = omap1_init_late, 270 .init_time = omap1_timer_init, 271 .restart = omap1_restart, 272MACHINE_END 273