1/* SPDX-License-Identifier: GPL-2.0 */
2/* ld script to make ARM Linux kernel
3 * taken from the i386 version by Russell King
4 * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
5 */
6
7/* No __ro_after_init data in the .rodata section - which will always be ro */
8#define RO_AFTER_INIT_DATA
9
10#include <linux/sizes.h>
11
12#include <asm/vmlinux.lds.h>
13#include <asm/cache.h>
14#include <asm/thread_info.h>
15#include <asm/page.h>
16#include <asm/mpu.h>
17
18OUTPUT_ARCH(arm)
19ENTRY(stext)
20
21#ifndef __ARMEB__
22jiffies = jiffies_64;
23#else
24jiffies = jiffies_64 + 4;
25#endif
26
27SECTIONS
28{
29	/*
30	 * XXX: The linker does not define how output sections are
31	 * assigned to input sections when there are multiple statements
32	 * matching the same input section name.  There is no documented
33	 * order of matching.
34	 *
35	 * unwind exit sections must be discarded before the rest of the
36	 * unwind sections get included.
37	 */
38	/DISCARD/ : {
39		ARM_DISCARD
40		*(.alt.smp.init)
41		*(.pv_table)
42#ifndef CONFIG_ARM_UNWIND
43		*(.ARM.exidx) *(.ARM.exidx.*)
44		*(.ARM.extab) *(.ARM.extab.*)
45#endif
46	}
47
48	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
49	_xiprom = .;			/* XIP ROM area to be mapped */
50
51	.head.text : {
52		_text = .;
53		HEAD_TEXT
54	}
55
56	.text : {			/* Real text segment		*/
57		_stext = .;		/* Text and read-only data	*/
58		ARM_TEXT
59	}
60
61	RO_DATA(PAGE_SIZE)
62
63	. = ALIGN(4);
64	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
65		__start___ex_table = .;
66		ARM_MMU_KEEP(*(__ex_table))
67		__stop___ex_table = .;
68	}
69
70#ifdef CONFIG_ARM_UNWIND
71	ARM_UNWIND_SECTIONS
72#endif
73
74	_etext = .;			/* End of text and rodata section */
75
76	ARM_VECTORS
77	INIT_TEXT_SECTION(8)
78	.exit.text : {
79		ARM_EXIT_KEEP(EXIT_TEXT)
80	}
81	.init.proc.info : {
82		ARM_CPU_DISCARD(PROC_INFO)
83	}
84	.init.arch.info : {
85		__arch_info_begin = .;
86		*(.arch.info.init)
87		__arch_info_end = .;
88	}
89	.init.tagtable : {
90		__tagtable_begin = .;
91		*(.taglist.init)
92		__tagtable_end = .;
93	}
94	.init.rodata : {
95		INIT_SETUP(16)
96		INIT_CALLS
97		CON_INITCALL
98		INIT_RAM_FS
99	}
100
101#ifdef CONFIG_ARM_MPU
102	. = ALIGN(SZ_128K);
103#endif
104	_exiprom = .;			/* End of XIP ROM area */
105
106/*
107 * From this point, stuff is considered writable and will be copied to RAM
108 */
109	__data_loc = ALIGN(4);		/* location in file */
110	. = PAGE_OFFSET + TEXT_OFFSET;	/* location in memory */
111#undef LOAD_OFFSET
112#define LOAD_OFFSET (PAGE_OFFSET + TEXT_OFFSET - __data_loc)
113
114	. = ALIGN(THREAD_SIZE);
115	_sdata = .;
116	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
117	.data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
118		*(.data..ro_after_init)
119	}
120	_edata = .;
121
122	. = ALIGN(PAGE_SIZE);
123	__init_begin = .;
124	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
125		INIT_DATA
126	}
127	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
128		ARM_EXIT_KEEP(EXIT_DATA)
129	}
130#ifdef CONFIG_SMP
131	PERCPU_SECTION(L1_CACHE_BYTES)
132#endif
133
134#ifdef CONFIG_HAVE_TCM
135	ARM_TCM
136#endif
137
138	/*
139	 * End of copied data. We need a dummy section to get its LMA.
140	 * Also located before final ALIGN() as trailing padding is not stored
141	 * in the resulting binary file and useless to copy.
142	 */
143	.data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
144	_edata_loc = LOADADDR(.data.endmark);
145
146	. = ALIGN(PAGE_SIZE);
147	__init_end = .;
148
149	BSS_SECTION(0, 0, 8)
150#ifdef CONFIG_ARM_MPU
151	. = ALIGN(PMSAv8_MINALIGN);
152#endif
153	_end = .;
154
155	STABS_DEBUG
156	DWARF_DEBUG
157	ARM_DETAILS
158
159	ARM_ASSERTS
160}
161
162/*
163 * These must never be empty
164 * If you have to comment these two assert statements out, your
165 * binutils is too old (for other reasons as well)
166 */
167ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
168#ifndef CONFIG_COMPILE_TEST
169ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
170#endif
171
172#ifdef CONFIG_XIP_DEFLATED_DATA
173/*
174 * The .bss is used as a stack area for __inflate_kernel_data() whose stack
175 * frame is 9568 bytes. Make sure it has extra room left.
176 */
177ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
178#endif
179
180#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
181/*
182 * Due to PMSAv7 restriction on base address and size we have to
183 * enforce minimal alignment restrictions. It was seen that weaker
184 * alignment restriction on _xiprom will likely force XIP address
185 * space spawns multiple MPU regions thus it is likely we run in
186 * situation when we are reprogramming MPU region we run on with
187 * something which doesn't cover reprogramming code itself, so as soon
188 * as we update MPU settings we'd immediately try to execute straight
189 * from background region which is XN.
190 * It seem that alignment in 1M should suit most users.
191 * _exiprom is aligned as 1/8 of 1M so can be covered by subregion
192 * disable
193 */
194ASSERT(!(_xiprom & (SZ_1M - 1)), "XIP start address may cause MPU programming issues")
195ASSERT(!(_exiprom & (SZ_128K - 1)), "XIP end address may cause MPU programming issues")
196#endif
197