1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Digi International's ConnectCore6UL SBC Pro board device tree source
4 *
5 * Copyright 2018 Digi International, Inc.
6 *
7 */
8
9/dts-v1/;
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/interrupt-controller/irq.h>
12#include "imx6ul.dtsi"
13#include "imx6ul-ccimx6ulsom.dtsi"
14
15/ {
16	model = "Digi International ConnectCore 6UL SBC Pro.";
17	compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
18
19	lcd_backlight: backlight {
20		compatible = "pwm-backlight";
21		pwms = <&pwm5 0 50000 0>;
22		brightness-levels = <0 4 8 16 32 64 128 255>;
23		default-brightness-level = <6>;
24		status = "okay";
25	};
26
27	panel {
28		compatible = "auo,g101evn010";
29		power-supply = <&ldo4_ext>;
30		backlight = <&lcd_backlight>;
31
32		port {
33			panel_in: endpoint {
34				remote-endpoint = <&display_out>;
35			};
36		};
37	};
38
39	reg_usb_otg1_vbus: regulator-usb-otg1 {
40		compatible = "regulator-fixed";
41		regulator-name = "usb_otg1_vbus";
42		regulator-min-microvolt = <5000000>;
43		regulator-max-microvolt = <5000000>;
44		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
45		enable-active-high;
46	};
47};
48
49&adc1 {
50	pinctrl-names = "default";
51	pinctrl-0 = <&pinctrl_adc1>;
52	status = "okay";
53};
54
55&can1 {
56	pinctrl-names = "default";
57	pinctrl-0 = <&pinctrl_flexcan1>;
58	xceiver-supply = <&ext_3v3>;
59	status = "okay";
60};
61
62/* CAN2 is multiplexed with UART2 RTS/CTS */
63&can2 {
64	pinctrl-names = "default";
65	pinctrl-0 = <&pinctrl_flexcan2>;
66	xceiver-supply = <&ext_3v3>;
67	status = "disabled";
68};
69
70&ecspi1 {
71	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
72	pinctrl-names = "default";
73	pinctrl-0 = <&pinctrl_ecspi1_master>;
74	status = "okay";
75};
76
77&fec1 {
78	pinctrl-names = "default";
79	pinctrl-0 = <&pinctrl_enet1>;
80	phy-mode = "rmii";
81	phy-handle = <&ethphy0>;
82	status = "okay";
83};
84
85&fec2 {
86	pinctrl-names = "default";
87	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
88	phy-mode = "rmii";
89	phy-handle = <&ethphy1>;
90	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
91	phy-reset-duration = <26>;
92	status = "okay";
93
94	mdio {
95		#address-cells = <1>;
96		#size-cells = <0>;
97
98		ethphy0: ethernet-phy@0 {
99			compatible = "ethernet-phy-ieee802.3-c22";
100			smsc,disable-energy-detect;
101			reg = <0>;
102		};
103
104		ethphy1: ethernet-phy@1 {
105			compatible = "ethernet-phy-ieee802.3-c22";
106			smsc,disable-energy-detect;
107			reg = <1>;
108		};
109	};
110};
111
112&gpio5 {
113	emmc-usd-mux-hog {
114		gpio-hog;
115		gpios = <1 GPIO_ACTIVE_LOW>;
116		output-high;
117	};
118};
119
120&i2c1 {
121	touchscreen@14 {
122		compatible = "goodix,gt911";
123		reg = <0x14>;
124		pinctrl-names = "default";
125		pinctrl-0 = <&pinctrl_goodix_touch>;
126		interrupt-parent = <&gpio5>;
127		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
128		irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
129		status = "okay";
130	};
131};
132
133&lcdif {
134	pinctrl-names = "default";
135	pinctrl-0 = <&pinctrl_lcdif_dat0_17
136		     &pinctrl_lcdif_clken
137		     &pinctrl_lcdif_hvsync>;
138	lcd-supply = <&ldo4_ext>;       /* BU90T82 LVDS bridge power */
139	status = "okay";
140
141	port {
142		display_out: endpoint {
143			remote-endpoint = <&panel_in>;
144		};
145	};
146};
147
148&ldo4_ext {
149	regulator-max-microvolt = <1800000>;
150};
151
152&pwm1 {
153	status = "okay";
154};
155
156&pwm2 {
157	status = "okay";
158};
159
160&pwm3 {
161	status = "okay";
162};
163
164&pwm4 {
165	pinctrl-names = "default";
166	pinctrl-0 = <&pinctrl_pwm4>;
167	status = "okay";
168};
169
170&pwm5 {
171	pinctrl-names = "default";
172	pinctrl-0 = <&pinctrl_pwm5>;
173	status = "okay";
174};
175
176&pwm6 {
177	status = "okay";
178};
179
180&pwm7 {
181	status = "okay";
182};
183
184&pwm8 {
185	status = "okay";
186};
187
188&sai2 {
189	pinctrl-names = "default", "sleep";
190	pinctrl-0 = <&pinctrl_sai2>;
191	pinctrl-1 = <&pinctrl_sai2_sleep>;
192	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
193			  <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
194			  <&clks IMX6UL_CLK_SAI2>;
195	assigned-clock-rates = <0>, <786432000>, <12288000>;
196	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
197	status = "okay";
198};
199
200/* UART2 RTS/CTS muxed with CAN2 */
201&uart2 {
202	pinctrl-names = "default";
203	pinctrl-0 = <&pinctrl_uart2_4wires>;
204	uart-has-rtscts;
205	status = "okay";
206};
207
208/* UART3 RTS/CTS muxed with CAN 1 */
209&uart3 {
210	pinctrl-names = "default";
211	pinctrl-0 = <&pinctrl_uart3_2wires>;
212	status = "okay";
213};
214
215&uart5 {
216	pinctrl-names = "default";
217	pinctrl-0 = <&pinctrl_uart5>;
218	status = "okay";
219};
220
221&usbotg1 {
222	dr_mode = "otg";
223	vbus-supply = <&reg_usb_otg1_vbus>;
224	pinctrl-0 = <&pinctrl_usbotg1>;
225	status = "okay";
226};
227
228&usbotg2 {
229	dr_mode = "host";
230	disable-over-current;
231	status = "okay";
232};
233
234/* USDHC2 (microSD conflicts with eMMC) */
235&usdhc2 {
236	pinctrl-names = "default";
237	pinctrl-0 = <&pinctrl_usdhc2>;
238	no-1-8-v;
239	broken-cd;	/* no carrier detect line (use polling) */
240	status = "okay";
241};
242
243&iomuxc {
244	pinctrl_adc1: adc1grp {
245		fsl,pins = <
246			/* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
247			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0xb0
248		>;
249	};
250
251	pinctrl_ecspi1_master: ecspi1grp1 {
252		fsl,pins = <
253			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x10b0
254			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x10b0
255			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x10b0
256			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
257		>;
258	};
259
260	pinctrl_enet1: enet1grp {
261		fsl,pins = <
262			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
263			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
264			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
265			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
266			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
267			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
268			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
269			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
270		>;
271	};
272
273	pinctrl_enet2: enet2grp {
274		fsl,pins = <
275			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
276			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
277			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
278			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
279			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
280			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
281			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
282			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x40017051
283		>;
284	};
285
286	pinctrl_enet2_mdio: mdioenet2grp {
287		fsl,pins = <
288			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
289			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
290		>;
291	};
292
293	pinctrl_flexcan1: flexcan1grp {
294		fsl,pins = <
295			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
296			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
297		>;
298	};
299	pinctrl_flexcan2: flexcan2grp {
300		fsl,pins = <
301			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
302			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
303		>;
304	};
305
306	pinctrl_goodix_touch: goodixgrp {
307		fsl,pins = <
308			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1020
309		>;
310	};
311
312	pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
313		fsl,pins = <
314			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
315			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
316			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
317			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
318			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
319			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
320			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
321			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
322			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
323			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
324			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
325			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
326			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
327			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
328			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
329			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
330			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
331			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
332		>;
333	};
334
335	pinctrl_lcdif_clken: lcdifctrlgrp1 {
336		fsl,pins = <
337			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x17050
338			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
339		>;
340	};
341
342	pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
343		fsl,pins = <
344			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
345			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
346		>;
347	};
348
349	pinctrl_pwm4: pwm4grp {
350		fsl,pins = <
351			MX6UL_PAD_GPIO1_IO05__PWM4_OUT          0x110b0
352		>;
353	};
354
355	pinctrl_pwm5: pwm5grp {
356		fsl,pins = <
357			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x110b0
358		>;
359	};
360
361	pinctrl_sai2: sai2grp {
362		fsl,pins = <
363			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
364			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
365			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
366			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
367			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
368			/* Interrupt */
369			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x10b0
370		>;
371	};
372
373	pinctrl_sai2_sleep: sai2grp-sleep {
374		fsl,pins = <
375			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x3000
376			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x3000
377			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x3000
378			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x3000
379			/* Interrupt */
380			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x3000
381		>;
382	};
383
384	pinctrl_uart2_4wires: uart2grp-4wires {
385		fsl,pins = <
386			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
387			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
388			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
389			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
390		>;
391	};
392
393	pinctrl_uart3_2wires: uart3grp-2wires {
394		fsl,pins = <
395			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
396			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
397		>;
398	};
399
400	pinctrl_uart5: uart5grp {
401		fsl,pins = <
402			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
403			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
404		>;
405	};
406
407	pinctrl_usdhc2: usdhc2grp {
408		fsl,pins = <
409			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
410			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10039
411			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
412			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
413			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
414			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
415			/* Mux selector between eMMC/SD# */
416			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x79
417		>;
418	};
419
420	pinctrl_usbotg1: usbotg1grp {
421		fsl,pins = <
422			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
423			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x17059
424			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x17059
425		>;
426	};
427};
428