1TI DA8xx MUSB
2~~~~~~~~~~~~~
3For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
4
5Required properties:
6~~~~~~~~~~~~~~~~~~~~
7 - compatible : Should be set to "ti,da830-musb".
8
9 - reg: Offset and length of the USB controller register set.
10
11 - interrupts: The USB interrupt number.
12
13 - interrupt-names: Should be set to "mc".
14
15 - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
16
17 - phys: Phandle for the PHY device
18
19 - phy-names: Should be "usb-phy"
20
21 - dmas: specifies the dma channels
22
23 - dma-names: specifies the names of the channels. Use "rxN" for receive
24   and "txN" for transmit endpoints. N specifies the endpoint number.
25
26Optional properties:
27~~~~~~~~~~~~~~~~~~~~
28 - vbus-supply: Phandle to a regulator providing the USB bus power.
29
30DMA
31~~~
32- compatible: ti,da830-cppi41
33- reg: offset and length of the following register spaces: CPPI DMA Controller,
34  CPPI DMA Scheduler, Queue Manager
35- reg-names: "controller", "scheduler", "queuemgr"
36- #dma-cells: should be set to 2. The first number represents the
37  channel number (0 ��� 3 for endpoints 1 ��� 4).
38  The second number is 0 for RX and 1 for TX transfers.
39- dma-channels: should be set to 4 representing the 4 endpoints.
40- #dma-channels: deprecated
41
42Example:
43	usb_phy: usb-phy {
44		compatible = "ti,da830-usb-phy";
45		#phy-cells = <0>;
46	};
47	usb0: usb@200000 {
48		compatible = "ti,da830-musb";
49		reg = <0x00200000 0x1000>;
50		ranges;
51		#address-cells = <1>;
52		#size-cells = <1>;
53		interrupts = <58>;
54		interrupt-names = "mc";
55
56		dr_mode = "host";
57		vbus-supply = <&usb_vbus>;
58		phys = <&usb_phy 0>;
59		phy-names = "usb-phy";
60
61		dmas = <&cppi41dma 0 0 &cppi41dma 1 0
62			&cppi41dma 2 0 &cppi41dma 3 0
63			&cppi41dma 0 1 &cppi41dma 1 1
64			&cppi41dma 2 1 &cppi41dma 3 1>;
65		dma-names =
66			"rx1", "rx2", "rx3", "rx4",
67			"tx1", "tx2", "tx3", "tx4";
68
69
70		cppi41dma: dma-controller@201000 {
71			compatible = "ti,da830-cppi41";
72			reg =  <0x201000 0x1000
73				0x202000 0x1000
74				0x204000 0x4000>;
75			reg-names = "controller", "scheduler", "queuemgr";
76			interrupts = <58>;
77			#dma-cells = <2>;
78			dma-channels = <4>;
79		};
80
81	};
82