1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/spi/brcm,spi-bcm-qspi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Broadcom SPI controller
8
9maintainers:
10  - Kamal Dasu <kdasu.kdev@gmail.com>
11  - Rafa�� Mi��ecki <rafal@milecki.pl>
12
13description: |
14  The Broadcom SPI controller is a SPI master found on various SOCs, including
15  BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consists
16  of:
17    MSPI : SPI master controller can read and write to a SPI slave device
18    BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
19           for flash reads and be configured to do single, double, quad lane
20           io with 3-byte and 4-byte addressing support.
21
22  Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
23  MSPI master can be used without BSPI. BRCMSTB SoCs have an additional instance
24  of a MSPI master without the BSPI to use with non flash slave devices that
25  use SPI protocol.
26
27allOf:
28  - $ref: spi-controller.yaml#
29
30properties:
31  compatible:
32    oneOf:
33      - description: Second Instance of MSPI BRCMSTB SoCs
34        items:
35          - enum:
36              - brcm,spi-bcm7425-qspi
37              - brcm,spi-bcm7429-qspi
38              - brcm,spi-bcm7435-qspi
39              - brcm,spi-bcm7445-qspi
40              - brcm,spi-bcm7216-qspi
41              - brcm,spi-bcm7278-qspi
42          - const: brcm,spi-bcm-qspi
43          - const: brcm,spi-brcmstb-mspi
44      - description: Second Instance of MSPI BRCMSTB SoCs
45        items:
46          - enum:
47              - brcm,spi-brcmstb-qspi
48              - brcm,spi-brcmstb-mspi
49              - brcm,spi-nsp-qspi
50              - brcm,spi-ns2-qspi
51          - const: brcm,spi-bcm-qspi
52
53  reg:
54    minItems: 1
55    maxItems: 5
56
57  reg-names:
58    minItems: 1
59    items:
60      - const: mspi
61      - const: bspi
62      - enum: [ intr_regs, intr_status_reg, cs_reg ]
63      - enum: [ intr_regs, intr_status_reg, cs_reg ]
64      - enum: [ intr_regs, intr_status_reg, cs_reg ]
65
66  interrupts:
67    minItems: 1
68    maxItems: 7
69
70  interrupt-names:
71    oneOf:
72      - minItems: 1
73        items:
74          - const: mspi_done
75          - const: mspi_halted
76          - const: spi_lr_fullness_reached
77          - const: spi_lr_session_aborted
78          - const: spi_lr_impatient
79          - const: spi_lr_session_done
80          - const: spi_lr_overread
81      - const: spi_l1_intr
82
83  clocks:
84    maxItems: 1
85    description: reference clock for this block
86
87  native-endian:
88    $ref: /schemas/types.yaml#/definitions/flag
89    description: Defined when using BE SoC and device uses BE register read/write
90
91unevaluatedProperties: false
92
93required:
94  - reg
95  - reg-names
96  - interrupts
97  - interrupt-names
98
99examples:
100  - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
101    spi@f03e3400 {
102        compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
103        reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
104        reg-names = "mspi", "bspi", "cs_reg";
105        interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
106        interrupt-parent = <&gic>;
107        interrupt-names = "mspi_done",
108                          "mspi_halted",
109                          "spi_lr_fullness_reached",
110                          "spi_lr_session_aborted",
111                          "spi_lr_impatient",
112                          "spi_lr_session_done",
113                          "spi_lr_overread";
114        clocks = <&hif_spi>;
115        #address-cells = <0x1>;
116        #size-cells = <0x0>;
117
118        flash@0 {
119            #size-cells = <0x2>;
120            #address-cells = <0x2>;
121            compatible = "m25p80";
122            reg = <0x0>;
123            spi-max-frequency = <0x2625a00>;
124            spi-cpol;
125            spi-cpha;
126        };
127    };
128  - | # BRCMSTB SoC: MSPI master for any SPI device
129    spi@f0416000 {
130        clocks = <&upg_fixed>;
131        compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
132        reg = <0xf0416000 0x180>;
133        reg-names = "mspi";
134        interrupts = <0x14>;
135        interrupt-parent = <&irq0_aon_intc>;
136        interrupt-names = "mspi_done";
137        #address-cells = <1>;
138        #size-cells = <0>;
139    };
140  - | # iProc SoC
141    #include <dt-bindings/interrupt-controller/irq.h>
142    #include <dt-bindings/interrupt-controller/arm-gic.h>
143
144    spi@18027200 {
145        compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
146        reg = <0x18027200 0x184>,
147              <0x18027000 0x124>,
148              <0x1811c408 0x004>,
149              <0x180273a0 0x01c>;
150        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
151        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
152                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
153                     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
154                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
155                     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
156                     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
157                     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
158        interrupt-names = "mspi_done",
159                          "mspi_halted",
160                          "spi_lr_fullness_reached",
161                          "spi_lr_session_aborted",
162                          "spi_lr_impatient",
163                          "spi_lr_session_done";
164        clocks = <&iprocmed>;
165        num-cs = <2>;
166        #address-cells = <1>;
167        #size-cells = <0>;
168    };
169  - | # NS2 SoC
170    #include <dt-bindings/interrupt-controller/irq.h>
171    #include <dt-bindings/interrupt-controller/arm-gic.h>
172
173    spi@66470200 {
174        compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
175        reg = <0x66470200 0x184>,
176              <0x66470000 0x124>,
177              <0x67017408 0x004>,
178              <0x664703a0 0x01c>;
179        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
180        interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
181        interrupt-names = "spi_l1_intr";
182        clocks = <&iprocmed>;
183        num-cs = <2>;
184        #address-cells = <1>;
185        #size-cells = <0>;
186
187        flash@0 {
188            #address-cells = <1>;
189            #size-cells = <1>;
190            compatible = "m25p80";
191            reg = <0x0>;
192            spi-max-frequency = <12500000>;
193            spi-cpol;
194            spi-cpha;
195        };
196    };
197