1Device Tree Clock bindings for APM X-Gene
2
3This binding uses the common clock binding[1].
4
5[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
6
7Required properties:
8- compatible : shall be one of the following:
9	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
10	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
11	"apm,xgene-pmd-clock" - for a X-Gene PMD clock
12	"apm,xgene-device-clock" - for a X-Gene device clock
13	"apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
14	"apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
15
16Required properties for SoC or PCP PLL clocks:
17- reg : shall be the physical PLL register address for the pll clock.
18- clocks : shall be the input parent clock phandle for the clock. This should
19	be the reference clock.
20- #clock-cells : shall be set to 1.
21- clock-output-names : shall be the name of the PLL referenced by derive
22  clock.
23Optional properties for PLL clocks:
24- clock-names : shall be the name of the PLL. If missing, use the device name.
25
26Required properties for PMD clocks:
27- reg : shall be the physical register address for the pmd clock.
28- clocks : shall be the input parent clock phandle for the clock.
29- #clock-cells : shall be set to 1.
30- clock-output-names : shall be the name of the clock referenced by derive
31  clock.
32Optional properties for PLL clocks:
33- clock-names : shall be the name of the clock. If missing, use the device name.
34
35Required properties for device clocks:
36- reg : shall be a list of address and length pairs describing the CSR
37         reset and/or the divider. Either may be omitted, but at least
38         one must be present.
39 - reg-names : shall be a string list describing the reg resource. This
40               may include "csr-reg" and/or "div-reg". If this property
41               is not present, the reg property is assumed to describe
42               only "csr-reg".
43- clocks : shall be the input parent clock phandle for the clock.
44- #clock-cells : shall be set to 1.
45- clock-output-names : shall be the name of the device referenced.
46Optional properties for device clocks:
47- clock-names : shall be the name of the device clock. If missing, use the
48                device name.
49- csr-offset : Offset to the CSR reset register from the reset address base.
50               Default is 0.
51- csr-mask : CSR reset mask bit. Default is 0xF.
52- enable-offset : Offset to the enable register from the reset address base.
53                  Default is 0x8.
54- enable-mask : CSR enable mask bit. Default is 0xF.
55- divider-offset : Offset to the divider CSR register from the divider base.
56                   Default is 0x0.
57- divider-width : Width of the divider register. Default is 0.
58- divider-shift : Bit shift of the divider register. Default is 0.
59
60For example:
61
62	pcppll: pcppll@17000100 {
63		compatible = "apm,xgene-pcppll-clock";
64		#clock-cells = <1>;
65		clocks = <&refclk 0>;
66		clock-names = "pcppll";
67		reg = <0x0 0x17000100 0x0 0x1000>;
68		clock-output-names = "pcppll";
69		type = <0>;
70	};
71
72	pmd0clk: pmd0clk@7e200200 {
73		compatible = "apm,xgene-pmd-clock";
74		#clock-cells = <1>;
75		clocks = <&pmdpll 0>;
76		reg = <0x0 0x7e200200 0x0 0x10>;
77		clock-output-names = "pmd0clk";
78	};
79
80	socpll: socpll@17000120 {
81		compatible = "apm,xgene-socpll-clock";
82		#clock-cells = <1>;
83		clocks = <&refclk 0>;
84		clock-names = "socpll";
85		reg = <0x0 0x17000120 0x0 0x1000>;
86		clock-output-names = "socpll";
87		type = <1>;
88	};
89
90	qmlclk: qmlclk {
91		compatible = "apm,xgene-device-clock";
92		#clock-cells = <1>;
93		clocks = <&socplldiv2 0>;
94		clock-names = "qmlclk";
95		reg = <0x0 0x1703C000 0x0 0x1000>;
96		reg-name = "csr-reg";
97		clock-output-names = "qmlclk";
98	};
99
100	ethclk: ethclk {
101		compatible = "apm,xgene-device-clock";
102		#clock-cells = <1>;
103		clocks = <&socplldiv2 0>;
104		clock-names = "ethclk";
105		reg = <0x0 0x17000000 0x0 0x1000>;
106		reg-names = "div-reg";
107		divider-offset = <0x238>;
108		divider-width = <0x9>;
109		divider-shift = <0x0>;
110		clock-output-names = "ethclk";
111	};
112
113	apbclk: apbclk {
114		compatible = "apm,xgene-device-clock";
115		#clock-cells = <1>;
116		clocks = <&ahbclk 0>;
117		clock-names = "apbclk";
118		reg = <0x0 0x1F2AC000 0x0 0x1000
119			0x0 0x1F2AC000 0x0 0x1000>;
120		reg-names = "csr-reg", "div-reg";
121		csr-offset = <0x0>;
122		csr-mask = <0x200>;
123		enable-offset = <0x8>;
124		enable-mask = <0x200>;
125		divider-offset = <0x10>;
126		divider-width = <0x2>;
127		divider-shift = <0x0>;
128		flags = <0x8>;
129		clock-output-names = "apbclk";
130	};
131
132