1/****************************************************************************** 2 * 3 * Name: skgehw.h 4 * Project: Gigabit Ethernet Adapters, Common Modules 5 * Version: $Revision: 2.49 $ 6 * Date: $Date: 2005/01/20 13:01:35 $ 7 * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family 8 * 9 ******************************************************************************/ 10 11/****************************************************************************** 12 * 13 * LICENSE: 14 * Copyright (C) Marvell International Ltd. and/or its affiliates 15 * 16 * The computer program files contained in this folder ("Files") 17 * are provided to you under the BSD-type license terms provided 18 * below, and any use of such Files and any derivative works 19 * thereof created by you shall be governed by the following terms 20 * and conditions: 21 * 22 * - Redistributions of source code must retain the above copyright 23 * notice, this list of conditions and the following disclaimer. 24 * - Redistributions in binary form must reproduce the above 25 * copyright notice, this list of conditions and the following 26 * disclaimer in the documentation and/or other materials provided 27 * with the distribution. 28 * - Neither the name of Marvell nor the names of its contributors 29 * may be used to endorse or promote products derived from this 30 * software without specific prior written permission. 31 * 32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 35 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 36 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 37 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 38 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 39 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 40 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 41 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 42 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED 43 * OF THE POSSIBILITY OF SUCH DAMAGE. 44 * /LICENSE 45 * 46 ******************************************************************************/ 47 48/*- 49 * SPDX-License-Identifier: BSD-4-Clause AND BSD-3-Clause 50 * 51 * Copyright (c) 1997, 1998, 1999, 2000 52 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 53 * 54 * Redistribution and use in source and binary forms, with or without 55 * modification, are permitted provided that the following conditions 56 * are met: 57 * 1. Redistributions of source code must retain the above copyright 58 * notice, this list of conditions and the following disclaimer. 59 * 2. Redistributions in binary form must reproduce the above copyright 60 * notice, this list of conditions and the following disclaimer in the 61 * documentation and/or other materials provided with the distribution. 62 * 3. All advertising materials mentioning features or use of this software 63 * must display the following acknowledgement: 64 * This product includes software developed by Bill Paul. 65 * 4. Neither the name of the author nor the names of any co-contributors 66 * may be used to endorse or promote products derived from this software 67 * without specific prior written permission. 68 * 69 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 70 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 71 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 72 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 73 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 74 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 75 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 76 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 77 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 78 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 79 * THE POSSIBILITY OF SUCH DAMAGE. 80 */ 81 82/*- 83 * Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu> 84 * 85 * Permission to use, copy, modify, and distribute this software for any 86 * purpose with or without fee is hereby granted, provided that the above 87 * copyright notice and this permission notice appear in all copies. 88 * 89 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 90 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 91 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 92 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 93 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 94 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 95 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 96 */ 97 98/*$FreeBSD: releng/12.0/sys/dev/msk/if_mskreg.h 325966 2017-11-18 14:26:50Z pfg $*/ 99 100/* 101 * SysKonnect PCI vendor ID 102 */ 103#define VENDORID_SK 0x1148 104 105/* 106 * Marvell PCI vendor ID 107 */ 108#define VENDORID_MARVELL 0x11AB 109 110/* 111 * D-Link PCI vendor ID 112 */ 113#define VENDORID_DLINK 0x1186 114 115/* 116 * SysKonnect ethernet device IDs 117 */ 118#define DEVICEID_SK_YUKON2 0x9000 119#define DEVICEID_SK_YUKON2_EXPR 0x9e00 120 121/* 122 * Marvell gigabit ethernet device IDs 123 */ 124#define DEVICEID_MRVL_8021CU 0x4340 125#define DEVICEID_MRVL_8022CU 0x4341 126#define DEVICEID_MRVL_8061CU 0x4342 127#define DEVICEID_MRVL_8062CU 0x4343 128#define DEVICEID_MRVL_8021X 0x4344 129#define DEVICEID_MRVL_8022X 0x4345 130#define DEVICEID_MRVL_8061X 0x4346 131#define DEVICEID_MRVL_8062X 0x4347 132#define DEVICEID_MRVL_8035 0x4350 133#define DEVICEID_MRVL_8036 0x4351 134#define DEVICEID_MRVL_8038 0x4352 135#define DEVICEID_MRVL_8039 0x4353 136#define DEVICEID_MRVL_8040 0x4354 137#define DEVICEID_MRVL_8040T 0x4355 138#define DEVICEID_MRVL_8042 0x4357 139#define DEVICEID_MRVL_8048 0x435A 140#define DEVICEID_MRVL_4360 0x4360 141#define DEVICEID_MRVL_4361 0x4361 142#define DEVICEID_MRVL_4362 0x4362 143#define DEVICEID_MRVL_4363 0x4363 144#define DEVICEID_MRVL_4364 0x4364 145#define DEVICEID_MRVL_4365 0x4365 146#define DEVICEID_MRVL_436A 0x436A 147#define DEVICEID_MRVL_436B 0x436B 148#define DEVICEID_MRVL_436C 0x436C 149#define DEVICEID_MRVL_436D 0x436D 150#define DEVICEID_MRVL_4370 0x4370 151#define DEVICEID_MRVL_4380 0x4380 152#define DEVICEID_MRVL_4381 0x4381 153 154/* 155 * D-Link gigabit ethernet device ID 156 */ 157#define DEVICEID_DLINK_DGE550SX 0x4001 158#define DEVICEID_DLINK_DGE560SX 0x4002 159#define DEVICEID_DLINK_DGE560T 0x4b00 160 161#define BIT_31 (1U << 31) 162#define BIT_30 (1 << 30) 163#define BIT_29 (1 << 29) 164#define BIT_28 (1 << 28) 165#define BIT_27 (1 << 27) 166#define BIT_26 (1 << 26) 167#define BIT_25 (1 << 25) 168#define BIT_24 (1 << 24) 169#define BIT_23 (1 << 23) 170#define BIT_22 (1 << 22) 171#define BIT_21 (1 << 21) 172#define BIT_20 (1 << 20) 173#define BIT_19 (1 << 19) 174#define BIT_18 (1 << 18) 175#define BIT_17 (1 << 17) 176#define BIT_16 (1 << 16) 177#define BIT_15 (1 << 15) 178#define BIT_14 (1 << 14) 179#define BIT_13 (1 << 13) 180#define BIT_12 (1 << 12) 181#define BIT_11 (1 << 11) 182#define BIT_10 (1 << 10) 183#define BIT_9 (1 << 9) 184#define BIT_8 (1 << 8) 185#define BIT_7 (1 << 7) 186#define BIT_6 (1 << 6) 187#define BIT_5 (1 << 5) 188#define BIT_4 (1 << 4) 189#define BIT_3 (1 << 3) 190#define BIT_2 (1 << 2) 191#define BIT_1 (1 << 1) 192#define BIT_0 (1 << 0) 193 194#define SHIFT31(x) ((x) << 31) 195#define SHIFT30(x) ((x) << 30) 196#define SHIFT29(x) ((x) << 29) 197#define SHIFT28(x) ((x) << 28) 198#define SHIFT27(x) ((x) << 27) 199#define SHIFT26(x) ((x) << 26) 200#define SHIFT25(x) ((x) << 25) 201#define SHIFT24(x) ((x) << 24) 202#define SHIFT23(x) ((x) << 23) 203#define SHIFT22(x) ((x) << 22) 204#define SHIFT21(x) ((x) << 21) 205#define SHIFT20(x) ((x) << 20) 206#define SHIFT19(x) ((x) << 19) 207#define SHIFT18(x) ((x) << 18) 208#define SHIFT17(x) ((x) << 17) 209#define SHIFT16(x) ((x) << 16) 210#define SHIFT15(x) ((x) << 15) 211#define SHIFT14(x) ((x) << 14) 212#define SHIFT13(x) ((x) << 13) 213#define SHIFT12(x) ((x) << 12) 214#define SHIFT11(x) ((x) << 11) 215#define SHIFT10(x) ((x) << 10) 216#define SHIFT9(x) ((x) << 9) 217#define SHIFT8(x) ((x) << 8) 218#define SHIFT7(x) ((x) << 7) 219#define SHIFT6(x) ((x) << 6) 220#define SHIFT5(x) ((x) << 5) 221#define SHIFT4(x) ((x) << 4) 222#define SHIFT3(x) ((x) << 3) 223#define SHIFT2(x) ((x) << 2) 224#define SHIFT1(x) ((x) << 1) 225#define SHIFT0(x) ((x) << 0) 226 227/* 228 * PCI Configuration Space header 229 */ 230#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */ 231#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */ 232#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ 233#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ 234#define PCI_OUR_STATUS 0x7c /* 32 bit Adapter Status Register */ 235#define PCI_OUR_REG_3 0x80 /* 32 bit Our Register 3 */ 236#define PCI_OUR_REG_4 0x84 /* 32 bit Our Register 4 */ 237#define PCI_OUR_REG_5 0x88 /* 32 bit Our Register 5 */ 238#define PCI_CFG_REG_0 0x90 /* 32 bit Config Register 0 */ 239#define PCI_CFG_REG_1 0x94 /* 32 bit Config Register 1 */ 240 241/* PCI Express Capability */ 242#define PEX_CAP_ID 0xe0 /* 8 bit PEX Capability ID */ 243#define PEX_NITEM 0xe1 /* 8 bit PEX Next Item Pointer */ 244#define PEX_CAP_REG 0xe2 /* 16 bit PEX Capability Register */ 245#define PEX_DEV_CAP 0xe4 /* 32 bit PEX Device Capabilities */ 246#define PEX_DEV_CTRL 0xe8 /* 16 bit PEX Device Control */ 247#define PEX_DEV_STAT 0xea /* 16 bit PEX Device Status */ 248#define PEX_LNK_CAP 0xec /* 32 bit PEX Link Capabilities */ 249#define PEX_LNK_CTRL 0xf0 /* 16 bit PEX Link Control */ 250#define PEX_LNK_STAT 0xf2 /* 16 bit PEX Link Status */ 251 252/* PCI Express Extended Capabilities */ 253#define PEX_ADV_ERR_REP 0x100 /* 32 bit PEX Advanced Error Reporting */ 254#define PEX_UNC_ERR_STAT 0x104 /* 32 bit PEX Uncorr. Errors Status */ 255#define PEX_UNC_ERR_MASK 0x108 /* 32 bit PEX Uncorr. Errors Mask */ 256#define PEX_UNC_ERR_SEV 0x10c /* 32 bit PEX Uncorr. Errors Severity */ 257#define PEX_COR_ERR_STAT 0x110 /* 32 bit PEX Correc. Errors Status */ 258#define PEX_COR_ERR_MASK 0x114 /* 32 bit PEX Correc. Errors Mask */ 259#define PEX_ADV_ERR_CAP_C 0x118 /* 32 bit PEX Advanced Error Cap./Ctrl */ 260#define PEX_HEADER_LOG 0x11c /* 4x32 bit PEX Header Log Register */ 261 262/* PCI_OUR_REG_1 32 bit Our Register 1 */ 263#define PCI_Y2_PIG_ENA BIT_31 /* Enable Plug-in-Go (YUKON-2) */ 264#define PCI_Y2_DLL_DIS BIT_30 /* Disable PCI DLL (YUKON-2) */ 265#define PCI_Y2_PHY2_COMA BIT_29 /* Set PHY 2 to Coma Mode (YUKON-2) */ 266#define PCI_Y2_PHY1_COMA BIT_28 /* Set PHY 1 to Coma Mode (YUKON-2) */ 267#define PCI_Y2_PHY2_POWD BIT_27 /* Set PHY 2 to Power Down (YUKON-2) */ 268#define PCI_Y2_PHY1_POWD BIT_26 /* Set PHY 1 to Power Down (YUKON-2) */ 269#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */ 270#define PCI_EN_IO BIT_23 /* Mapping to I/O space */ 271#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */ 272 /* 1 = Map Flash to memory */ 273 /* 0 = Disable addr. dec */ 274#define PCI_PAGESIZE (3L<<20)/* Bit 21..20: FLASH Page Size */ 275#define PCI_PAGE_16 (0L<<20)/* 16 k pages */ 276#define PCI_PAGE_32K (1L<<20)/* 32 k pages */ 277#define PCI_PAGE_64K (2L<<20)/* 64 k pages */ 278#define PCI_PAGE_128K (3L<<20)/* 128 k pages */ 279#define PCI_PAGEREG (7L<<16)/* Bit 18..16: Page Register */ 280#define PCI_PEX_LEGNAT BIT_15 /* PEX PM legacy/native mode (YUKON-2) */ 281#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */ 282#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */ 283#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */ 284#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */ 285#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */ 286#define PCI_BURST_DIS BIT_9 /* Burst Disable */ 287#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */ 288#define PCI_SKEW_DAS (0xfL<<4)/* Bit 7.. 4: Skew Ctrl, DAS Ext */ 289#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */ 290#define PCI_CLS_OPT BIT_3 /* Cache Line Size opt. PCI-X (YUKON-2) */ 291 292/* PCI_OUR_REG_2 32 bit Our Register 2 */ 293#define PCI_VPD_WR_THR (0xff<<24) /* Bit 31..24: VPD Write Threshold */ 294#define PCI_DEV_SEL (0x7f<<17) /* Bit 23..17: EEPROM Device Select */ 295#define PCI_VPD_ROM_SZ (0x07<<14) /* Bit 16..14: VPD ROM Size */ 296 /* Bit 13..12: reserved */ 297#define PCI_PATCH_DIR (0x0f<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */ 298#define PCI_PATCH_DIR_3 BIT_11 299#define PCI_PATCH_DIR_2 BIT_10 300#define PCI_PATCH_DIR_1 BIT_9 301#define PCI_PATCH_DIR_0 BIT_8 302#define PCI_EXT_PATCHS (0x0f<<4) /* Bit 7.. 4: Extended Patches 3..0 */ 303#define PCI_EXT_PATCH_3 BIT_7 304#define PCI_EXT_PATCH_2 BIT_6 305#define PCI_EXT_PATCH_1 BIT_5 306#define PCI_EXT_PATCH_0 BIT_4 307#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */ 308#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */ 309#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */ 310 311/* PCI_OUR_STATUS 32 bit Adapter Status Register (Yukon-2) */ 312#define PCI_OS_PCI64B BIT_31 /* Conventional PCI 64 bits Bus */ 313#define PCI_OS_PCIX BIT_30 /* PCI-X Bus */ 314#define PCI_OS_MODE_MSK (3<<28) /* Bit 29..28: PCI-X Bus Mode Mask */ 315#define PCI_OS_PCI66M BIT_27 /* PCI 66 MHz Bus */ 316#define PCI_OS_PCI_X BIT_26 /* PCI/PCI-X Bus (0 = PEX) */ 317#define PCI_OS_DLLE_MSK (3<<24) /* Bit 25..24: DLL Status Indication */ 318#define PCI_OS_DLLR_MSK (0x0f<<20) /* Bit 23..20: DLL Row Counters Values */ 319#define PCI_OS_DLLC_MSK (0x0f<<16) /* Bit 19..16: DLL Col. Counters Values */ 320 321#define PCI_OS_SPEED(val) ((val & PCI_OS_MODE_MSK) >> 28) /* PCI-X Speed */ 322/* possible values for the speed field of the register */ 323#define PCI_OS_SPD_PCI 0 /* PCI Conventional Bus */ 324#define PCI_OS_SPD_X66 1 /* PCI-X 66MHz Bus */ 325#define PCI_OS_SPD_X100 2 /* PCI-X 100MHz Bus */ 326#define PCI_OS_SPD_X133 3 /* PCI-X 133MHz Bus */ 327 328/* PCI_OUR_REG_3 32 bit Our Register 3 (Yukon-ECU only) */ 329#define PCI_CLK_MACSEC_DIS BIT_17 /* Disable Clock MACSec. */ 330 331/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */ 332#define PCI_TIMER_VALUE_MSK (0xff<<16) /* Bit 23..16: Timer Value Mask */ 333#define PCI_FORCE_ASPM_REQUEST BIT_15 /* Force ASPM Request (A1 only) */ 334#define PCI_ASPM_GPHY_LINK_DOWN BIT_14 /* GPHY Link Down (A1 only) */ 335#define PCI_ASPM_INT_FIFO_EMPTY BIT_13 /* Internal FIFO Empty (A1 only) */ 336#define PCI_ASPM_CLKRUN_REQUEST BIT_12 /* CLKRUN Request (A1 only) */ 337#define PCI_ASPM_FORCE_CLKREQ_ENA BIT_4 /* Force CLKREQ Enable (A1b only) */ 338#define PCI_ASPM_CLKREQ_PAD_CTL BIT_3 /* CLKREQ PAD Control (A1 only) */ 339#define PCI_ASPM_A1_MODE_SELECT BIT_2 /* A1 Mode Select (A1 only) */ 340#define PCI_CLK_GATE_PEX_UNIT_ENA BIT_1 /* Enable Gate PEX Unit Clock */ 341#define PCI_CLK_GATE_ROOT_COR_ENA BIT_0 /* Enable Gate Root Core Clock */ 342 343/* PCI_OUR_REG_5 32 bit Our Register 5 (Yukon-ECU only) */ 344 /* Bit 31..27: for A3 & later */ 345#define PCI_CTL_DIV_CORE_CLK_ENA BIT_31 /* Divide Core Clock Enable */ 346#define PCI_CTL_SRESET_VMAIN_AV BIT_30 /* Soft Reset for Vmain_av De-Glitch */ 347#define PCI_CTL_BYPASS_VMAIN_AV BIT_29 /* Bypass En. for Vmain_av De-Glitch */ 348#define PCI_CTL_TIM_VMAIN_AV1 BIT_28 /* Bit 28..27: Timer Vmain_av Mask */ 349#define PCI_CTL_TIM_VMAIN_AV0 BIT_27 /* Bit 28..27: Timer Vmain_av Mask */ 350#define PCI_CTL_TIM_VMAIN_AV_MSK (BIT_28 | BIT_27) 351 /* Bit 26..16: Release Clock on Event */ 352#define PCI_REL_PCIE_RST_DE_ASS BIT_26 /* PCIe Reset De-Asserted */ 353#define PCI_REL_GPHY_REC_PACKET BIT_25 /* GPHY Received Packet */ 354#define PCI_REL_INT_FIFO_N_EMPTY BIT_24 /* Internal FIFO Not Empty */ 355#define PCI_REL_MAIN_PWR_AVAIL BIT_23 /* Main Power Available */ 356#define PCI_REL_CLKRUN_REQ_REL BIT_22 /* CLKRUN Request Release */ 357#define PCI_REL_PCIE_RESET_ASS BIT_21 /* PCIe Reset Asserted */ 358#define PCI_REL_PME_ASSERTED BIT_20 /* PME Asserted */ 359#define PCI_REL_PCIE_EXIT_L1_ST BIT_19 /* PCIe Exit L1 State */ 360#define PCI_REL_LOADER_NOT_FIN BIT_18 /* EPROM Loader Not Finished */ 361#define PCI_REL_PCIE_RX_EX_IDLE BIT_17 /* PCIe Rx Exit Electrical Idle State */ 362#define PCI_REL_GPHY_LINK_UP BIT_16 /* GPHY Link Up */ 363 /* Bit 10.. 0: Mask for Gate Clock */ 364#define PCI_GAT_PCIE_RST_ASSERTED BIT_10 /* PCIe Reset Asserted */ 365#define PCI_GAT_GPHY_N_REC_PACKET BIT_9 /* GPHY Not Received Packet */ 366#define PCI_GAT_INT_FIFO_EMPTY BIT_8 /* Internal FIFO Empty */ 367#define PCI_GAT_MAIN_PWR_N_AVAIL BIT_7 /* Main Power Not Available */ 368#define PCI_GAT_CLKRUN_REQ_REL BIT_6 /* CLKRUN Not Requested */ 369#define PCI_GAT_PCIE_RESET_ASS BIT_5 /* PCIe Reset Asserted */ 370#define PCI_GAT_PME_DE_ASSERTED BIT_4 /* PME De-Asserted */ 371#define PCI_GAT_PCIE_ENTER_L1_ST BIT_3 /* PCIe Enter L1 State */ 372#define PCI_GAT_LOADER_FINISHED BIT_2 /* EPROM Loader Finished */ 373#define PCI_GAT_PCIE_RX_EL_IDLE BIT_1 /* PCIe Rx Electrical Idle State */ 374#define PCI_GAT_GPHY_LINK_DOWN BIT_0 /* GPHY Link Down */ 375 376/* PCI_CFG_REG_1 32 bit Config Register 1 */ 377#define PCI_CF1_DIS_REL_EVT_RST BIT_24 /* Dis. Rel. Event during PCIE reset */ 378 /* Bit 23..21: Release Clock on Event */ 379#define PCI_CF1_REL_LDR_NOT_FIN BIT_23 /* EEPROM Loader Not Finished */ 380#define PCI_CF1_REL_VMAIN_AVLBL BIT_22 /* Vmain available */ 381#define PCI_CF1_REL_PCIE_RESET BIT_21 /* PCI-E reset */ 382 /* Bit 20..18: Gate Clock on Event */ 383#define PCI_CF1_GAT_LDR_NOT_FIN BIT_20 /* EEPROM Loader Finished */ 384#define PCI_CF1_GAT_PCIE_RX_IDLE BIT_19 /* PCI-E Rx Electrical idle */ 385#define PCI_CF1_GAT_PCIE_RESET BIT_18 /* PCI-E Reset */ 386#define PCI_CF1_PRST_PHY_CLKREQ BIT_17 /* Enable PCI-E rst & PM2PHY gen. CLKREQ */ 387#define PCI_CF1_PCIE_RST_CLKREQ BIT_16 /* Enable PCI-E rst generate CLKREQ */ 388 389#define PCI_CF1_ENA_CFG_LDR_DONE BIT_8 /* Enable core level Config loader done */ 390#define PCI_CF1_ENA_TXBMU_RD_IDLE BIT_1 /* Enable TX BMU Read IDLE for ASPM */ 391#define PCI_CF1_ENA_TXBMU_WR_IDLE BIT_0 /* Enable TX BMU Write IDLE for ASPM */ 392 393/* PEX_DEV_CTRL 16 bit PEX Device Control (Yukon-2) */ 394#define PEX_DC_MAX_RRS_MSK (7<<12) /* Bit 14..12: Max. Read Request Size */ 395#define PEX_DC_EN_NO_SNOOP BIT_11 /* Enable No Snoop */ 396#define PEX_DC_EN_AUX_POW BIT_10 /* Enable AUX Power */ 397#define PEX_DC_EN_PHANTOM BIT_9 /* Enable Phantom Functions */ 398#define PEX_DC_EN_EXT_TAG BIT_8 /* Enable Extended Tag Field */ 399#define PEX_DC_MAX_PLS_MSK (7<<5) /* Bit 7.. 5: Max. Payload Size Mask */ 400#define PEX_DC_EN_REL_ORD BIT_4 /* Enable Relaxed Ordering */ 401#define PEX_DC_EN_UNS_RQ_RP BIT_3 /* Enable Unsupported Request Reporting */ 402#define PEX_DC_EN_FAT_ER_RP BIT_2 /* Enable Fatal Error Reporting */ 403#define PEX_DC_EN_NFA_ER_RP BIT_1 /* Enable Non-Fatal Error Reporting */ 404#define PEX_DC_EN_COR_ER_RP BIT_0 /* Enable Correctable Error Reporting */ 405 406#define PEX_DC_MAX_RD_RQ_SIZE(x) (SHIFT12(x) & PEX_DC_MAX_RRS_MSK) 407 408/* PEX_LNK_STAT 16 bit PEX Link Status (Yukon-2) */ 409#define PEX_LS_SLOT_CLK_CFG BIT_12 /* Slot Clock Config */ 410#define PEX_LS_LINK_TRAIN BIT_11 /* Link Training */ 411#define PEX_LS_TRAIN_ERROR BIT_10 /* Training Error */ 412#define PEX_LS_LINK_WI_MSK (0x3f<<4) /* Bit 9.. 4: Neg. Link Width Mask */ 413#define PEX_LS_LINK_SP_MSK 0x0f /* Bit 3.. 0: Link Speed Mask */ 414 415/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */ 416#define PEX_UNSUP_REQ BIT_20 /* Unsupported Request Error */ 417#define PEX_MALFOR_TLP BIT_18 /* Malformed TLP */ 418#define PEX_RX_OV BIT_17 /* Receiver Overflow (not supported) */ 419#define PEX_UNEXP_COMP BIT_16 /* Unexpected Completion */ 420#define PEX_COMP_TO BIT_14 /* Completion Timeout */ 421#define PEX_FLOW_CTRL_P BIT_13 /* Flow Control Protocol Error */ 422#define PEX_POIS_TLP BIT_12 /* Poisoned TLP */ 423#define PEX_DATA_LINK_P BIT_4 /* Data Link Protocol Error */ 424 425#define PEX_FATAL_ERRORS (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P) 426 427/* Control Register File (Address Map) */ 428 429/* 430 * Bank 0 431 */ 432#define B0_RAP 0x0000 /* 8 bit Register Address Port */ 433#define B0_CTST 0x0004 /* 16 bit Control/Status register */ 434#define B0_LED 0x0006 /* 8 Bit LED register */ 435#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */ 436#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */ 437#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */ 438#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */ 439#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */ 440#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg 1 */ 441 442/* Special ISR registers (Yukon-2 only) */ 443#define B0_Y2_SP_ISRC2 0x001c /* 32 bit Special Interrupt Source Reg 2 */ 444#define B0_Y2_SP_ISRC3 0x0020 /* 32 bit Special Interrupt Source Reg 3 */ 445#define B0_Y2_SP_EISR 0x0024 /* 32 bit Enter ISR Reg */ 446#define B0_Y2_SP_LISR 0x0028 /* 32 bit Leave ISR Reg */ 447#define B0_Y2_SP_ICR 0x002c /* 32 bit Interrupt Control Reg */ 448 449/* 450 * Bank 1 451 * - completely empty (this is the RAP Block window) 452 * Note: if RAP = 1 this page is reserved 453 */ 454 455/* 456 * Bank 2 457 */ 458/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */ 459#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */ 460#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */ 461#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */ 462#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ 463#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ 464#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ 465#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ 466#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ 467#define B2_Y2_CLK_GATE 0x011d /* 8 bit Clock Gating (Yukon-2) */ 468#define B2_Y2_HW_RES 0x011e /* 8 bit HW Resources (Yukon-2) */ 469#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */ 470#define B2_Y2_CLK_CTRL 0x0120 /* 32 bit Core Clock Frequency Control */ 471#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */ 472#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */ 473#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */ 474#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */ 475#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/ 476#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ 477#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ 478#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ 479#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ 480#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ 481#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ 482#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */ 483#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */ 484#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */ 485#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */ 486#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */ 487#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */ 488 489#define Y2_PEX_PHY_DATA 0x0170 /* 16 bit PEX PHY Data Register */ 490#define Y2_PEX_PHY_ADDR 0x0172 /* 16 bit PEX PHY Address Register */ 491 492/* 493 * Bank 3 494 */ 495/* RAM Random Registers */ 496#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */ 497#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */ 498#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */ 499 500#define SELECT_RAM_BUFFER(rb, addr) (addr | (rb << 6)) /* Yukon-2 only */ 501 502/* RAM Interface Registers */ 503/* Yukon-2: use SELECT_RAM_BUFFER() to access the RAM buffer */ 504/* 505 * The HW-Spec. calls this registers Timeout Value 0..11. But this names are 506 * not usable in SW. Please notice these are NOT real timeouts, these are 507 * the number of qWords transferred continuously. 508 */ 509#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */ 510#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */ 511#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */ 512#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */ 513#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */ 514#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */ 515#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */ 516#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */ 517#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */ 518#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */ 519#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/ 520#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/ 521#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */ 522#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */ 523#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */ 524 525/* 526 * Bank 4 - 5 527 */ 528/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ 529#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/ 530#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */ 531#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */ 532#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */ 533#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */ 534#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */ 535#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */ 536 537#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs)) 538 539/* RSS key registers for Yukon-2 Family */ 540#define B4_RSS_KEY 0x0220 /* 4x32 bit RSS Key register (Yukon-2) */ 541/* RSS key register offsets */ 542#define KEY_IDX_0 0 /* offset for location of KEY 0 */ 543#define KEY_IDX_1 4 /* offset for location of KEY 1 */ 544#define KEY_IDX_2 8 /* offset for location of KEY 2 */ 545#define KEY_IDX_3 12 /* offset for location of KEY 3 */ 546 /* 0x0280 - 0x0292: MAC 2 */ 547#define RSS_KEY_ADDR(Port, KeyIndex) \ 548 ((B4_RSS_KEY | ( ((Port) == 0) ? 0 : 0x80)) + (KeyIndex)) 549 550/* 551 * Bank 8 - 15 552 */ 553/* Receive and Transmit Queue Registers, use Q_ADDR() to access */ 554#define B8_Q_REGS 0x0400 555 556/* Queue Register Offsets, use Q_ADDR() to access */ 557#define Q_D 0x00 /* 8*32 bit Current Descriptor */ 558#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */ 559#define Q_DONE 0x24 /* 16 bit Done Index */ 560#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */ 561#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */ 562#define Q_BC 0x30 /* 32 bit Current Byte Counter */ 563#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */ 564#define Q_F 0x38 /* 32 bit Flag Register */ 565#define Q_T1 0x3c /* 32 bit Test Register 1 */ 566#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */ 567#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */ 568#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */ 569#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */ 570#define Q_WM 0x40 /* 16 bit FIFO Watermark */ 571#define Q_AL 0x42 /* 8 bit FIFO Alignment */ 572#define Q_RSP 0x44 /* 16 bit FIFO Read Shadow Pointer */ 573#define Q_RSL 0x46 /* 8 bit FIFO Read Shadow Level */ 574#define Q_RP 0x48 /* 8 bit FIFO Read Pointer */ 575#define Q_RL 0x4a /* 8 bit FIFO Read Level */ 576#define Q_WP 0x4c /* 8 bit FIFO Write Pointer */ 577#define Q_WSP 0x4d /* 8 bit FIFO Write Shadow Pointer */ 578#define Q_WL 0x4e /* 8 bit FIFO Write Level */ 579#define Q_WSL 0x4f /* 8 bit FIFO Write Shadow Level */ 580 581#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs)) 582 583/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address */ 584#define Y2_B8_PREF_REGS 0x0450 585 586#define PREF_UNIT_CTRL_REG 0x00 /* 32 bit Prefetch Control register */ 587#define PREF_UNIT_LAST_IDX_REG 0x04 /* 16 bit Last Index */ 588#define PREF_UNIT_ADDR_LOW_REG 0x08 /* 32 bit List start addr, low part */ 589#define PREF_UNIT_ADDR_HI_REG 0x0c /* 32 bit List start addr, high part*/ 590#define PREF_UNIT_GET_IDX_REG 0x10 /* 16 bit Get Index */ 591#define PREF_UNIT_PUT_IDX_REG 0x14 /* 16 bit Put Index */ 592#define PREF_UNIT_FIFO_WP_REG 0x20 /* 8 bit FIFO write pointer */ 593#define PREF_UNIT_FIFO_RP_REG 0x24 /* 8 bit FIFO read pointer */ 594#define PREF_UNIT_FIFO_WM_REG 0x28 /* 8 bit FIFO watermark */ 595#define PREF_UNIT_FIFO_LEV_REG 0x2c /* 8 bit FIFO level */ 596 597#define PREF_UNIT_MASK_IDX 0x0fff 598 599#define Y2_PREF_Q_ADDR(Queue, Offs) (Y2_B8_PREF_REGS + (Queue) + (Offs)) 600 601/* 602 * Bank 16 - 23 603 */ 604/* RAM Buffer Registers */ 605#define B16_RAM_REGS 0x0800 606 607/* RAM Buffer Register Offsets, use RB_ADDR() to access */ 608#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */ 609#define RB_END 0x04 /* 32 bit RAM Buffer End Address */ 610#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */ 611#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */ 612#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Packet */ 613#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Packet */ 614#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */ 615#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */ 616#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */ 617#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */ 618#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */ 619#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */ 620#define RB_TST2 0x2a /* 8 bit RAM Buffer Test Register 2 */ 621 622/* 623 * Bank 24 624 */ 625/* Receive GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */ 626#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */ 627#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */ 628#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */ 629#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ 630#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ 631#define RX_GMF_TR_THR 0x0c54 /* 32 bit Rx Truncation Threshold (Yukon-2) */ 632#define RX_GMF_UP_THR 0x0c58 /* 16 bit Rx Upper Pause Thr (Yukon-EC_U) */ 633#define RX_GMF_LP_THR 0x0c5a /* 16 bit Rx Lower Pause Thr (Yukon-EC_U) */ 634#define RX_GMF_VLAN 0x0c5c /* 32 bit Rx VLAN Type Register (Yukon-2) */ 635#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ 636#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ 637#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ 638#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ 639 640/* 641 * Bank 25 642 */ 643 /* 0x0c80 - 0x0cbf: MAC 2 */ 644 /* 0x0cc0 - 0x0cff: reserved */ 645 646/* 647 * Bank 26 648 */ 649/* Transmit GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */ 650#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */ 651#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ 652#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ 653#define TX_GMF_VLAN 0x0d5c /* 32 bit Tx VLAN Type Register (Yukon-2) */ 654#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ 655#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Pointer */ 656#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ 657#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ 658#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ 659#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ 660 661/* 662 * Bank 27 663 */ 664 /* 0x0d80 - 0x0dbf: MAC 2 */ 665 /* 0x0daa - 0x0dff: reserved */ 666 667/* 668 * Bank 28 669 */ 670/* Descriptor Poll Timer Registers */ 671#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */ 672#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */ 673#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */ 674#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */ 675/* Time Stamp Timer Registers (YUKON only) */ 676#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */ 677#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */ 678#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */ 679/* Polling Unit Registers (Yukon-2 only) */ 680#define POLL_CTRL 0x0e20 /* 32 bit Polling Unit Control Reg */ 681#define POLL_LAST_IDX 0x0e24 /* 16 bit Polling Unit List Last Index */ 682#define POLL_LIST_ADDR_LO 0x0e28 /* 32 bit Poll. List Start Addr (low) */ 683#define POLL_LIST_ADDR_HI 0x0e2c /* 32 bit Poll. List Start Addr (high) */ 684/* ASF Subsystem Registers (Yukon-2 only) */ 685#define B28_Y2_SMB_CONFIG 0x0e40 /* 32 bit ASF SMBus Config Register */ 686#define B28_Y2_SMB_CSD_REG 0x0e44 /* 32 bit ASF SMB Control/Status/Data */ 687#define B28_Y2_CPU_WDOG 0x0e48 /* 32 bit Watchdog Register */ 688#define B28_Y2_ASF_IRQ_V_BASE 0x0e60 /* 32 bit ASF IRQ Vector Base */ 689#define B28_Y2_ASF_STAT_CMD 0x0e68 /* 32 bit ASF Status and Command Reg */ 690#define B28_Y2_ASF_HCU_CCSR 0x0e68 /* 32 bit ASF HCU CCSR (Yukon EX) */ 691#define B28_Y2_ASF_HOST_COM 0x0e6c /* 32 bit ASF Host Communication Reg */ 692#define B28_Y2_DATA_REG_1 0x0e70 /* 32 bit ASF/Host Data Register 1 */ 693#define B28_Y2_DATA_REG_2 0x0e74 /* 32 bit ASF/Host Data Register 2 */ 694#define B28_Y2_DATA_REG_3 0x0e78 /* 32 bit ASF/Host Data Register 3 */ 695#define B28_Y2_DATA_REG_4 0x0e7c /* 32 bit ASF/Host Data Register 4 */ 696 697/* 698 * Bank 29 699 */ 700 701/* Status BMU Registers (Yukon-2 only)*/ 702#define STAT_CTRL 0x0e80 /* 32 bit Status BMU Control Reg */ 703#define STAT_LAST_IDX 0x0e84 /* 16 bit Status BMU Last Index */ 704#define STAT_LIST_ADDR_LO 0x0e88 /* 32 bit Status List Start Addr (low) */ 705#define STAT_LIST_ADDR_HI 0x0e8c /* 32 bit Status List Start Addr (high) */ 706#define STAT_TXA1_RIDX 0x0e90 /* 16 bit Status TxA1 Report Index Reg */ 707#define STAT_TXS1_RIDX 0x0e92 /* 16 bit Status TxS1 Report Index Reg */ 708#define STAT_TXA2_RIDX 0x0e94 /* 16 bit Status TxA2 Report Index Reg */ 709#define STAT_TXS2_RIDX 0x0e96 /* 16 bit Status TxS2 Report Index Reg */ 710#define STAT_TX_IDX_TH 0x0e98 /* 16 bit Status Tx Index Threshold Reg */ 711#define STAT_PUT_IDX 0x0e9c /* 16 bit Status Put Index Reg */ 712/* FIFO Control/Status Registers (Yukon-2 only)*/ 713#define STAT_FIFO_WP 0x0ea0 /* 8 bit Status FIFO Write Pointer Reg */ 714#define STAT_FIFO_RP 0x0ea4 /* 8 bit Status FIFO Read Pointer Reg */ 715#define STAT_FIFO_RSP 0x0ea6 /* 8 bit Status FIFO Read Shadow Ptr */ 716#define STAT_FIFO_LEVEL 0x0ea8 /* 8 bit Status FIFO Level Reg */ 717#define STAT_FIFO_SHLVL 0x0eaa /* 8 bit Status FIFO Shadow Level Reg */ 718#define STAT_FIFO_WM 0x0eac /* 8 bit Status FIFO Watermark Reg */ 719#define STAT_FIFO_ISR_WM 0x0ead /* 8 bit Status FIFO ISR Watermark Reg */ 720/* Level and ISR Timer Registers (Yukon-2 only)*/ 721#define STAT_LEV_TIMER_INI 0x0eb0 /* 32 bit Level Timer Init. Value Reg */ 722#define STAT_LEV_TIMER_CNT 0x0eb4 /* 32 bit Level Timer Counter Reg */ 723#define STAT_LEV_TIMER_CTRL 0x0eb8 /* 8 bit Level Timer Control Reg */ 724#define STAT_LEV_TIMER_TEST 0x0eb9 /* 8 bit Level Timer Test Reg */ 725#define STAT_TX_TIMER_INI 0x0ec0 /* 32 bit Tx Timer Init. Value Reg */ 726#define STAT_TX_TIMER_CNT 0x0ec4 /* 32 bit Tx Timer Counter Reg */ 727#define STAT_TX_TIMER_CTRL 0x0ec8 /* 8 bit Tx Timer Control Reg */ 728#define STAT_TX_TIMER_TEST 0x0ec9 /* 8 bit Tx Timer Test Reg */ 729#define STAT_ISR_TIMER_INI 0x0ed0 /* 32 bit ISR Timer Init. Value Reg */ 730#define STAT_ISR_TIMER_CNT 0x0ed4 /* 32 bit ISR Timer Counter Reg */ 731#define STAT_ISR_TIMER_CTRL 0x0ed8 /* 8 bit ISR Timer Control Reg */ 732#define STAT_ISR_TIMER_TEST 0x0ed9 /* 8 bit ISR Timer Test Reg */ 733 734#define ST_LAST_IDX_MASK 0x007f /* Last Index Mask */ 735#define ST_TXRP_IDX_MASK 0x0fff /* Tx Report Index Mask */ 736#define ST_TXTH_IDX_MASK 0x0fff /* Tx Threshold Index Mask */ 737#define ST_WM_IDX_MASK 0x3f /* FIFO Watermark Index Mask */ 738 739/* 740 * Bank 30 741 */ 742/* GMAC and GPHY Control Registers (YUKON only) */ 743#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */ 744#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */ 745#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */ 746#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */ 747#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */ 748 749/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ 750 751#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */ 752 753#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */ 754#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */ 755#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */ 756#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */ 757#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */ 758#define WOL_PATT_PME 0x0f2a /* 8 bit WOL PME Match Enable (Yukon-2) */ 759#define WOL_PATT_ASFM 0x0f2b /* 8 bit WOL ASF Match Enable (Yukon-2) */ 760#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Pointer */ 761 762/* WOL Pattern Length Registers (YUKON only) */ 763 764#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */ 765#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */ 766 767/* WOL Pattern Counter Registers (YUKON only) */ 768 769#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */ 770#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */ 771 772/* 773 * Bank 32 - 33 774 */ 775#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */ 776#define WOL_PATT_RAM_2 0x1400 /* WOL Pattern RAM Link 2 */ 777 778/* offset to configuration space on Yukon-2 */ 779#define Y2_CFG_SPC 0x1c00 780#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */ 781#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */ 782 783/* 784 * Control Register Bit Definitions: 785 */ 786/* B0_CTST 24 bit Control/Status register */ 787#define Y2_VMAIN_AVAIL BIT_17 /* VMAIN available (YUKON-2 only) */ 788#define Y2_VAUX_AVAIL BIT_16 /* VAUX available (YUKON-2 only) */ 789#define Y2_HW_WOL_ON BIT_15 /* HW WOL On (Yukon-EC Ultra A1 only) */ 790#define Y2_HW_WOL_OFF BIT_14 /* HW WOL Off (Yukon-EC Ultra A1 only) */ 791#define Y2_ASF_ENABLE BIT_13 /* ASF Unit Enable (YUKON-2 only) */ 792#define Y2_ASF_DISABLE BIT_12 /* ASF Unit Disable (YUKON-2 only) */ 793#define Y2_CLK_RUN_ENA BIT_11 /* CLK_RUN Enable (YUKON-2 only) */ 794#define Y2_CLK_RUN_DIS BIT_10 /* CLK_RUN Disable (YUKON-2 only) */ 795#define Y2_LED_STAT_ON BIT_9 /* Status LED On (YUKON-2 only) */ 796#define Y2_LED_STAT_OFF BIT_8 /* Status LED Off (YUKON-2 only) */ 797#define CS_ST_SW_IRQ BIT_7 /* Set IRQ SW Request */ 798#define CS_CL_SW_IRQ BIT_6 /* Clear IRQ SW Request */ 799#define CS_STOP_DONE BIT_5 /* Stop Master is finished */ 800#define CS_STOP_MAST BIT_4 /* Command Bit to stop the master */ 801#define CS_MRST_CLR BIT_3 /* Clear Master Reset */ 802#define CS_MRST_SET BIT_2 /* Set Master Reset */ 803#define CS_RST_CLR BIT_1 /* Clear Software Reset */ 804#define CS_RST_SET BIT_0 /* Set Software Reset */ 805 806#define LED_STAT_ON BIT_1 /* Status LED On */ 807#define LED_STAT_OFF BIT_0 /* Status LED Off */ 808 809/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ 810#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */ 811#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */ 812#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */ 813#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */ 814#define PC_VAUX_ON BIT_3 /* Switch VAUX On */ 815#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */ 816#define PC_VCC_ON BIT_1 /* Switch VCC On */ 817#define PC_VCC_OFF BIT_0 /* Switch VCC Off */ 818 819/* B0_ISRC 32 bit Interrupt Source Register */ 820/* B0_IMSK 32 bit Interrupt Mask Register */ 821/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ 822/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ 823/* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */ 824/* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */ 825/* B0_Y2_SP_EISR 32 bit Enter ISR Reg */ 826/* B0_Y2_SP_LISR 32 bit Leave ISR Reg */ 827#define Y2_IS_PORT_MASK(Port, Mask) ((Mask) << (Port*8)) 828#define Y2_IS_HW_ERR BIT_31 /* Interrupt HW Error */ 829#define Y2_IS_STAT_BMU BIT_30 /* Status BMU Interrupt */ 830#define Y2_IS_ASF BIT_29 /* ASF subsystem Interrupt */ 831#define Y2_IS_POLL_CHK BIT_27 /* Check IRQ from polling unit */ 832#define Y2_IS_TWSI_RDY BIT_26 /* IRQ on end of TWSI Tx */ 833#define Y2_IS_IRQ_SW BIT_25 /* SW forced IRQ */ 834#define Y2_IS_TIMINT BIT_24 /* IRQ from Timer */ 835#define Y2_IS_IRQ_PHY2 BIT_12 /* Interrupt from PHY 2 */ 836#define Y2_IS_IRQ_MAC2 BIT_11 /* Interrupt from MAC 2 */ 837#define Y2_IS_CHK_RX2 BIT_10 /* Descriptor error Rx 2 */ 838#define Y2_IS_CHK_TXS2 BIT_9 /* Descriptor error TXS 2 */ 839#define Y2_IS_CHK_TXA2 BIT_8 /* Descriptor error TXA 2 */ 840#define Y2_IS_PSM_ACK BIT_7 /* PSM Ack (Yukon Optima) */ 841#define Y2_IS_PTP_TIST BIT_6 /* PTP TIme Stamp (Yukon Optima) */ 842#define Y2_IS_PHY_QLNK BIT_5 /* PHY Quick Link (Yukon Optima) */ 843#define Y2_IS_IRQ_PHY1 BIT_4 /* Interrupt from PHY 1 */ 844#define Y2_IS_IRQ_MAC1 BIT_3 /* Interrupt from MAC 1 */ 845#define Y2_IS_CHK_RX1 BIT_2 /* Descriptor error Rx 1 */ 846#define Y2_IS_CHK_TXS1 BIT_1 /* Descriptor error TXS 1 */ 847#define Y2_IS_CHK_TXA1 BIT_0 /* Descriptor error TXA 1 */ 848 849#define Y2_IS_L1_MASK 0x0000001f /* IRQ Mask for port 1 */ 850 851#define Y2_IS_L2_MASK 0x00001f00 /* IRQ Mask for port 2 */ 852 853#define Y2_IS_ALL_MSK 0xef001f1f /* All Interrupt bits */ 854 855#define Y2_IS_PORT_A \ 856 (Y2_IS_IRQ_PHY1 | Y2_IS_IRQ_MAC1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_RX1) 857#define Y2_IS_PORT_B \ 858 (Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_RX2) 859 860/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ 861/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ 862/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ 863#define Y2_IS_TIST_OV BIT_29 /* Time Stamp Timer overflow interrupt */ 864#define Y2_IS_SENSOR BIT_28 /* Sensor interrupt */ 865#define Y2_IS_MST_ERR BIT_27 /* Master error interrupt */ 866#define Y2_IS_IRQ_STAT BIT_26 /* Status exception interrupt */ 867#define Y2_IS_PCI_EXP BIT_25 /* PCI-Express interrupt */ 868#define Y2_IS_PCI_NEXP BIT_24 /* PCI-Express error similar to PCI error */ 869#define Y2_IS_PAR_RD2 BIT_13 /* Read RAM parity error interrupt */ 870#define Y2_IS_PAR_WR2 BIT_12 /* Write RAM parity error interrupt */ 871#define Y2_IS_PAR_MAC2 BIT_11 /* MAC hardware fault interrupt */ 872#define Y2_IS_PAR_RX2 BIT_10 /* Parity Error Rx Queue 2 */ 873#define Y2_IS_TCP_TXS2 BIT_9 /* TCP length mismatch sync Tx queue IRQ */ 874#define Y2_IS_TCP_TXA2 BIT_8 /* TCP length mismatch async Tx queue IRQ */ 875#define Y2_IS_PAR_RD1 BIT_5 /* Read RAM parity error interrupt */ 876#define Y2_IS_PAR_WR1 BIT_4 /* Write RAM parity error interrupt */ 877#define Y2_IS_PAR_MAC1 BIT_3 /* MAC hardware fault interrupt */ 878#define Y2_IS_PAR_RX1 BIT_2 /* Parity Error Rx Queue 1 */ 879#define Y2_IS_TCP_TXS1 BIT_1 /* TCP length mismatch sync Tx queue IRQ */ 880#define Y2_IS_TCP_TXA1 BIT_0 /* TCP length mismatch async Tx queue IRQ */ 881 882#define Y2_HWE_L1_MASK (Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 |\ 883 Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1) 884#define Y2_HWE_L2_MASK (Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 |\ 885 Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2) 886 887#define Y2_HWE_ALL_MSK (Y2_IS_TIST_OV | /* Y2_IS_SENSOR | */ Y2_IS_MST_ERR |\ 888 Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP |\ 889 Y2_HWE_L1_MASK | Y2_HWE_L2_MASK) 890 891/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ 892#define CFG_CHIP_R_MSK (0x0f<<4) /* Bit 7.. 4: Chip Revision */ 893#define CFG_DIS_M2_CLK BIT_1 /* Disable Clock for 2nd MAC */ 894#define CFG_SNG_MAC BIT_0 /* MAC Config: 0 = 2 MACs; 1 = 1 MAC */ 895 896/* B2_CHIP_ID 8 bit Chip Identification Number */ 897#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ 898#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ 899#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */ 900#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */ 901#define CHIP_ID_YUKON_XL 0xb3 /* Chip ID for YUKON-2 XL */ 902#define CHIP_ID_YUKON_EC_U 0xb4 /* Chip ID for YUKON-2 EC Ultra */ 903#define CHIP_ID_YUKON_EX 0xb5 /* Chip ID for YUKON-2 Extreme */ 904#define CHIP_ID_YUKON_EC 0xb6 /* Chip ID for YUKON-2 EC */ 905#define CHIP_ID_YUKON_FE 0xb7 /* Chip ID for YUKON-2 FE */ 906#define CHIP_ID_YUKON_FE_P 0xb8 /* Chip ID for YUKON-2 FE+ */ 907#define CHIP_ID_YUKON_SUPR 0xb9 /* Chip ID for YUKON-2 Supreme */ 908#define CHIP_ID_YUKON_UL_2 0xba /* Chip ID for YUKON-2 Ultra 2 */ 909#define CHIP_ID_YUKON_UNKNOWN 0xbb 910#define CHIP_ID_YUKON_OPT 0xbc /* Chip ID for YUKON-2 Optima */ 911 912#define CHIP_REV_YU_XL_A0 0 /* Chip Rev. for Yukon-2 A0 */ 913#define CHIP_REV_YU_XL_A1 1 /* Chip Rev. for Yukon-2 A1 */ 914#define CHIP_REV_YU_XL_A2 2 /* Chip Rev. for Yukon-2 A2 */ 915#define CHIP_REV_YU_XL_A3 3 /* Chip Rev. for Yukon-2 A3 */ 916 917#define CHIP_REV_YU_EC_A1 0 /* Chip Rev. for Yukon-EC A1/A0 */ 918#define CHIP_REV_YU_EC_A2 1 /* Chip Rev. for Yukon-EC A2 */ 919#define CHIP_REV_YU_EC_A3 2 /* Chip Rev. for Yukon-EC A3 */ 920 921#define CHIP_REV_YU_EC_U_A0 1 922#define CHIP_REV_YU_EC_U_A1 2 923 924#define CHIP_REV_YU_FE_P_A0 0 /* Chip Rev. for Yukon-2 FE+ A0 */ 925 926#define CHIP_REV_YU_EX_A0 1 /* Chip Rev. for Yukon-2 EX A0 */ 927#define CHIP_REV_YU_EX_B0 2 /* Chip Rev. for Yukon-2 EX B0 */ 928 929#define CHIP_REV_YU_SU_A0 0 /* Chip Rev. for Yukon-2 SUPR A0 */ 930#define CHIP_REV_YU_SU_B0 1 /* Chip Rev. for Yukon-2 SUPR B0 */ 931#define CHIP_REV_YU_SU_B1 3 /* Chip Rev. for Yukon-2 SUPR B1 */ 932 933/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */ 934#define Y2_STATUS_LNK2_INAC BIT_7 /* Status Link 2 inactiv (0 = activ) */ 935#define Y2_CLK_GAT_LNK2_DIS BIT_6 /* Disable clock gating Link 2 */ 936#define Y2_COR_CLK_LNK2_DIS BIT_5 /* Disable Core clock Link 2 */ 937#define Y2_PCI_CLK_LNK2_DIS BIT_4 /* Disable PCI clock Link 2 */ 938#define Y2_STATUS_LNK1_INAC BIT_3 /* Status Link 1 inactiv (0 = activ) */ 939#define Y2_CLK_GAT_LNK1_DIS BIT_2 /* Disable clock gating Link 1 */ 940#define Y2_COR_CLK_LNK1_DIS BIT_1 /* Disable Core clock Link 1 */ 941#define Y2_PCI_CLK_LNK1_DIS BIT_0 /* Disable PCI clock Link 1 */ 942 943/* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */ 944#define CFG_LED_MODE_MSK (0x07<<2) /* Bit 4.. 2: LED Mode Mask */ 945#define CFG_LINK_2_AVAIL BIT_1 /* Link 2 available */ 946#define CFG_LINK_1_AVAIL BIT_0 /* Link 1 available */ 947 948#define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2) 949#define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL) 950 951/* B2_E_3 8 bit lower 4 bits used for HW self test result */ 952#define B2_E3_RES_MASK 0x0f 953 954/* B2_Y2_CLK_CTRL 32 bit Core Clock Frequency Control Register (Yukon-2/EC) */ 955/* Yukon-EC/FE */ 956#define Y2_CLK_DIV_VAL_MSK (0xff<<16) /* Bit 23..16: Clock Divisor Value */ 957#define Y2_CLK_DIV_VAL(x) (SHIFT16(x) & Y2_CLK_DIV_VAL_MSK) 958/* Yukon-2 */ 959#define Y2_CLK_DIV_VAL2_MSK (0x07<<21) /* Bit 23..21: Clock Divisor Value */ 960#define Y2_CLK_SELECT2_MSK (0x1f<<16) /* Bit 20..16: Clock Select */ 961#define Y2_CLK_DIV_VAL_2(x) (SHIFT21(x) & Y2_CLK_DIV_VAL2_MSK) 962#define Y2_CLK_SEL_VAL_2(x) (SHIFT16(x) & Y2_CLK_SELECT2_MSK) 963#define Y2_CLK_DIV_ENA BIT_1 /* Enable Core Clock Division */ 964#define Y2_CLK_DIV_DIS BIT_0 /* Disable Core Clock Division */ 965 966/* B2_TI_CTRL 8 bit Timer control */ 967/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ 968#define TIM_START BIT_2 /* Start Timer */ 969#define TIM_STOP BIT_1 /* Stop Timer */ 970#define TIM_CLR_IRQ BIT_0 /* Clear Timer IRQ (!IRQM) */ 971 972/* B2_TI_TEST 8 Bit Timer Test */ 973/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ 974/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ 975#define TIM_T_ON BIT_2 /* Test mode on */ 976#define TIM_T_OFF BIT_1 /* Test mode off */ 977#define TIM_T_STEP BIT_0 /* Test step */ 978 979/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ 980/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ 981#define DPT_MSK 0x00ffffff /* Bit 23.. 0: Desc Poll Timer Bits */ 982 983/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ 984#define DPT_START BIT_1 /* Start Descriptor Poll Timer */ 985#define DPT_STOP BIT_0 /* Stop Descriptor Poll Timer */ 986 987/* B2_TST_CTRL1 8 bit Test Control Register 1 */ 988#define TST_FRC_DPERR_MR BIT_7 /* force DATAPERR on MST RD */ 989#define TST_FRC_DPERR_MW BIT_6 /* force DATAPERR on MST WR */ 990#define TST_FRC_DPERR_TR BIT_5 /* force DATAPERR on TRG RD */ 991#define TST_FRC_DPERR_TW BIT_4 /* force DATAPERR on TRG WR */ 992#define TST_FRC_APERR_M BIT_3 /* force ADDRPERR on MST */ 993#define TST_FRC_APERR_T BIT_2 /* force ADDRPERR on TRG */ 994#define TST_CFG_WRITE_ON BIT_1 /* Enable Config Reg WR */ 995#define TST_CFG_WRITE_OFF BIT_0 /* Disable Config Reg WR */ 996 997/* B2_GP_IO */ 998#define GLB_GPIO_CLK_DEB_ENA BIT_31 /* Clock Debug Enable */ 999#define GLB_GPIO_CLK_DBG_MSK 0x3c000000 /* Clock Debug */ 1000 1001#define GLB_GPIO_INT_RST_D3_DIS BIT_15 /* Disable Internal Reset After D3 to D0 */ 1002#define GLB_GPIO_LED_PAD_SPEED_UP BIT_14 /* LED PAD Speed Up */ 1003#define GLB_GPIO_STAT_RACE_DIS BIT_13 /* Status Race Disable */ 1004#define GLB_GPIO_TEST_SEL_MSK 0x00001800 /* Testmode Select */ 1005#define GLB_GPIO_TEST_SEL_BASE BIT_11 1006#define GLB_GPIO_RAND_ENA BIT_10 /* Random Enable */ 1007#define GLB_GPIO_RAND_BIT_1 BIT_9 /* Random Bit 1 */ 1008 1009/* B2_I2C_CTRL 32 bit I2C HW Control Register */ 1010#define I2C_FLAG BIT_31 /* Start read/write if WR */ 1011#define I2C_ADDR (0x7fff<<16) /* Bit 30..16: Addr to be RD/WR */ 1012#define I2C_DEV_SEL (0x7f<<9) /* Bit 15.. 9: I2C Device Select */ 1013#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ 1014#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */ 1015#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */ 1016#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */ 1017#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */ 1018#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */ 1019#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */ 1020#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */ 1021#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */ 1022#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */ 1023#define I2C_STOP BIT_0 /* Interrupt I2C transfer */ 1024 1025/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */ 1026#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */ 1027 1028/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */ 1029#define I2C_DATA_DIR BIT_2 /* direction of I2C_DATA */ 1030#define I2C_DATA BIT_1 /* I2C Data Port */ 1031#define I2C_CLK BIT_0 /* I2C Clock Port */ 1032 1033/* I2C Address */ 1034#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address (Volt and Temp) */ 1035 1036 1037/* B2_BSC_CTRL 8 bit Blink Source Counter Control */ 1038#define BSC_START BIT_1 /* Start Blink Source Counter */ 1039#define BSC_STOP BIT_0 /* Stop Blink Source Counter */ 1040 1041/* B2_BSC_STAT 8 bit Blink Source Counter Status */ 1042#define BSC_SRC BIT_0 /* Blink Source, 0=Off / 1=On */ 1043 1044/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ 1045#define BSC_T_ON BIT_2 /* Test mode on */ 1046#define BSC_T_OFF BIT_1 /* Test mode off */ 1047#define BSC_T_STEP BIT_0 /* Test step */ 1048 1049/* Y2_PEX_PHY_ADDR/DATA PEX PHY address and data reg (Yukon-2 only) */ 1050#define PEX_RD_ACCESS BIT_31 /* Access Mode Read = 1, Write = 0 */ 1051#define PEX_DB_ACCESS BIT_30 /* Access to debug register */ 1052 1053/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ 1054#define RAM_ADR_RAN 0x0007ffff /* Bit 18.. 0: RAM Address Range */ 1055 1056/* RAM Interface Registers */ 1057/* B3_RI_CTRL 16 bit RAM Interface Control Register */ 1058#define RI_CLR_RD_PERR BIT_9 /* Clear IRQ RAM Read Parity Err */ 1059#define RI_CLR_WR_PERR BIT_8 /* Clear IRQ RAM Write Parity Err */ 1060#define RI_RST_CLR BIT_1 /* Clear RAM Interface Reset */ 1061#define RI_RST_SET BIT_0 /* Set RAM Interface Reset */ 1062 1063#define MSK_RI_TO_53 36 /* RAM interface timeout */ 1064 1065/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ 1066/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ 1067/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ 1068/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ 1069/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ 1070#define TXA_MAX_VAL 0x00ffffff/* Bit 23.. 0: Max TXA Timer/Cnt Val */ 1071 1072/* TXA_CTRL 8 bit Tx Arbiter Control Register */ 1073#define TXA_ENA_FSYNC BIT_7 /* Enable force of sync Tx queue */ 1074#define TXA_DIS_FSYNC BIT_6 /* Disable force of sync Tx queue */ 1075#define TXA_ENA_ALLOC BIT_5 /* Enable alloc of free bandwidth */ 1076#define TXA_DIS_ALLOC BIT_4 /* Disable alloc of free bandwidth */ 1077#define TXA_START_RC BIT_3 /* Start sync Rate Control */ 1078#define TXA_STOP_RC BIT_2 /* Stop sync Rate Control */ 1079#define TXA_ENA_ARB BIT_1 /* Enable Tx Arbiter */ 1080#define TXA_DIS_ARB BIT_0 /* Disable Tx Arbiter */ 1081 1082/* TXA_TEST 8 bit Tx Arbiter Test Register */ 1083#define TXA_INT_T_ON BIT_5 /* Tx Arb Interval Timer Test On */ 1084#define TXA_INT_T_OFF BIT_4 /* Tx Arb Interval Timer Test Off */ 1085#define TXA_INT_T_STEP BIT_3 /* Tx Arb Interval Timer Step */ 1086#define TXA_LIM_T_ON BIT_2 /* Tx Arb Limit Timer Test On */ 1087#define TXA_LIM_T_OFF BIT_1 /* Tx Arb Limit Timer Test Off */ 1088#define TXA_LIM_T_STEP BIT_0 /* Tx Arb Limit Timer Step */ 1089 1090/* TXA_STAT 8 bit Tx Arbiter Status Register */ 1091#define TXA_PRIO_XS BIT_0 /* sync queue has prio to send */ 1092 1093/* Q_BC 32 bit Current Byte Counter */ 1094#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */ 1095 1096/* Rx BMU Control / Status Registers (Yukon-2) */ 1097#define BMU_IDLE BIT_31 /* BMU Idle State */ 1098#define BMU_RX_TCP_PKT BIT_30 /* Rx TCP Packet (when RSS Hash enabled) */ 1099#define BMU_RX_IP_PKT BIT_29 /* Rx IP Packet (when RSS Hash enabled) */ 1100#define BMU_ENA_RX_RSS_HASH BIT_15 /* Enable Rx RSS Hash */ 1101#define BMU_DIS_RX_RSS_HASH BIT_14 /* Disable Rx RSS Hash */ 1102#define BMU_ENA_RX_CHKSUM BIT_13 /* Enable Rx TCP/IP Checksum Check */ 1103#define BMU_DIS_RX_CHKSUM BIT_12 /* Disable Rx TCP/IP Checksum Check */ 1104#define BMU_CLR_IRQ_PAR BIT_11 /* Clear IRQ on Parity errors (Rx) */ 1105#define BMU_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segmen. error (Tx) */ 1106#define BMU_CLR_IRQ_CHK BIT_10 /* Clear IRQ Check */ 1107#define BMU_STOP BIT_9 /* Stop Rx/Tx Queue */ 1108#define BMU_START BIT_8 /* Start Rx/Tx Queue */ 1109#define BMU_FIFO_OP_ON BIT_7 /* FIFO Operational On */ 1110#define BMU_FIFO_OP_OFF BIT_6 /* FIFO Operational Off */ 1111#define BMU_FIFO_ENA BIT_5 /* Enable FIFO */ 1112#define BMU_FIFO_RST BIT_4 /* Reset FIFO */ 1113#define BMU_OP_ON BIT_3 /* BMU Operational On */ 1114#define BMU_OP_OFF BIT_2 /* BMU Operational Off */ 1115#define BMU_RST_CLR BIT_1 /* Clear BMU Reset (Enable) */ 1116#define BMU_RST_SET BIT_0 /* Set BMU Reset */ 1117 1118#define BMU_CLR_RESET (BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR) 1119#define BMU_OPER_INIT (BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | \ 1120 BMU_START | BMU_FIFO_ENA | BMU_OP_ON) 1121 1122/* Tx BMU Control / Status Registers (Yukon-2) */ 1123 /* Bit 31: same as for Rx */ 1124#define BMU_TX_IPIDINCR_ON BIT_13 /* Enable IP ID Increment */ 1125#define BMU_TX_IPIDINCR_OFF BIT_12 /* Disable IP ID Increment */ 1126#define BMU_TX_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segm. length mism. */ 1127 /* Bit 10..0: same as for Rx */ 1128 1129/* Q_F 32 bit Flag Register */ 1130#define F_TX_CHK_AUTO_OFF BIT_31 /* Tx checksum auto-calc Off(Yukon EX)*/ 1131#define F_TX_CHK_AUTO_ON BIT_30 /* Tx checksum auto-calc On(Yukon EX)*/ 1132#define F_ALM_FULL BIT_28 /* Rx FIFO: almost full */ 1133#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */ 1134#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */ 1135#define F_WM_REACHED BIT_25 /* Watermark reached */ 1136#define F_M_RX_RAM_DIS BIT_24 /* MAC Rx RAM Read Port disable */ 1137#define F_FIFO_LEVEL (0x1f<<16) 1138 /* Bit 23..16: # of Qwords in FIFO */ 1139#define F_WATER_MARK 0x0007ff/* Bit 10.. 0: Watermark */ 1140 1141/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address (Yukon-2 only)*/ 1142/* PREF_UNIT_CTRL_REG 32 bit Prefetch Control register */ 1143#define PREF_UNIT_OP_ON BIT_3 /* prefetch unit operational */ 1144#define PREF_UNIT_OP_OFF BIT_2 /* prefetch unit not operational */ 1145#define PREF_UNIT_RST_CLR BIT_1 /* Clear Prefetch Unit Reset */ 1146#define PREF_UNIT_RST_SET BIT_0 /* Set Prefetch Unit Reset */ 1147 1148/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ 1149/* RB_START 32 bit RAM Buffer Start Address */ 1150/* RB_END 32 bit RAM Buffer End Address */ 1151/* RB_WP 32 bit RAM Buffer Write Pointer */ 1152/* RB_RP 32 bit RAM Buffer Read Pointer */ 1153/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ 1154/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ 1155/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ 1156/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ 1157/* RB_PC 32 bit RAM Buffer Packet Counter */ 1158/* RB_LEV 32 bit RAM Buffer Level Register */ 1159#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ 1160 1161/* RB_TST2 8 bit RAM Buffer Test Register 2 */ 1162#define RB_PC_DEC BIT_3 /* Packet Counter Decrement */ 1163#define RB_PC_T_ON BIT_2 /* Packet Counter Test On */ 1164#define RB_PC_T_OFF BIT_1 /* Packet Counter Test Off */ 1165#define RB_PC_INC BIT_0 /* Packet Counter Increment */ 1166 1167/* RB_TST1 8 bit RAM Buffer Test Register 1 */ 1168#define RB_WP_T_ON BIT_6 /* Write Pointer Test On */ 1169#define RB_WP_T_OFF BIT_5 /* Write Pointer Test Off */ 1170#define RB_WP_INC BIT_4 /* Write Pointer Increment */ 1171#define RB_RP_T_ON BIT_2 /* Read Pointer Test On */ 1172#define RB_RP_T_OFF BIT_1 /* Read Pointer Test Off */ 1173#define RB_RP_INC BIT_0 /* Read Pointer Increment */ 1174 1175/* RB_CTRL 8 bit RAM Buffer Control Register */ 1176#define RB_ENA_STFWD BIT_5 /* Enable Store & Forward */ 1177#define RB_DIS_STFWD BIT_4 /* Disable Store & Forward */ 1178#define RB_ENA_OP_MD BIT_3 /* Enable Operation Mode */ 1179#define RB_DIS_OP_MD BIT_2 /* Disable Operation Mode */ 1180#define RB_RST_CLR BIT_1 /* Clear RAM Buf STM Reset */ 1181#define RB_RST_SET BIT_0 /* Set RAM Buf STM Reset */ 1182 1183/* RAM Buffer High Pause Threshold values */ 1184#define MSK_RB_ULPP (8 * 1024) /* Upper Level in kB/8 */ 1185#define MSK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ 1186#define MSK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ 1187 1188/* Threshold values for Yukon-EC Ultra */ 1189#define MSK_ECU_ULPP 0x0080 /* Upper Pause Threshold (multiples of 8) */ 1190#define MSK_ECU_LLPP 0x0060 /* Lower Pause Threshold (multiples of 8) */ 1191#define MSK_ECU_AE_THR 0x0070 /* Almost Empty Threshold */ 1192#define MSK_ECU_TXFF_LEV 0x01a0 /* Tx BMU FIFO Level */ 1193#define MSK_ECU_JUMBO_WM 0x01 1194 1195#define MSK_BMU_RX_WM 0x600 /* BMU Rx Watermark */ 1196#define MSK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ 1197/* performance sensitive drivers should set this define to 0x80 */ 1198#define MSK_BMU_RX_WM_PEX 0x600 /* BMU Rx Watermark for PEX */ 1199 1200/* Receive and Transmit Queues */ 1201#define Q_R1 0x0000 /* Receive Queue 1 */ 1202#define Q_R2 0x0080 /* Receive Queue 2 */ 1203#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */ 1204#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */ 1205#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */ 1206#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */ 1207 1208#define Q_ASF_R1 0x100 /* ASF Rx Queue 1 */ 1209#define Q_ASF_R2 0x180 /* ASF Rx Queue 2 */ 1210#define Q_ASF_T1 0x140 /* ASF Tx Queue 1 */ 1211#define Q_ASF_T2 0x1c0 /* ASF Tx Queue 2 */ 1212 1213#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs)) 1214 1215/* Minimum RAM Buffer Rx Queue Size */ 1216#define MSK_MIN_RXQ_SIZE 10 1217/* Minimum RAM Buffer Tx Queue Size */ 1218#define MSK_MIN_TXQ_SIZE 10 1219/* Percentage of queue size from whole memory. 80 % for receive */ 1220#define MSK_RAM_QUOTA_RX 80 1221 1222/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ 1223#define WOL_CTL_LINK_CHG_OCC BIT_15 1224#define WOL_CTL_MAGIC_PKT_OCC BIT_14 1225#define WOL_CTL_PATTERN_OCC BIT_13 1226#define WOL_CTL_CLEAR_RESULT BIT_12 1227#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11 1228#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10 1229#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9 1230#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8 1231#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7 1232#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6 1233#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5 1234#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4 1235#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3 1236#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2 1237#define WOL_CTL_ENA_PATTERN_UNIT BIT_1 1238#define WOL_CTL_DIS_PATTERN_UNIT BIT_0 1239 1240#define WOL_CTL_DEFAULT \ 1241 (WOL_CTL_DIS_PME_ON_LINK_CHG | \ 1242 WOL_CTL_DIS_PME_ON_PATTERN | \ 1243 WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ 1244 WOL_CTL_DIS_LINK_CHG_UNIT | \ 1245 WOL_CTL_DIS_PATTERN_UNIT | \ 1246 WOL_CTL_DIS_MAGIC_PKT_UNIT) 1247 1248/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ 1249#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) 1250 1251/* WOL_PATT_PME 8 bit WOL PME Match Enable (Yukon-2) */ 1252#define WOL_PATT_FORCE_PME BIT_7 /* Generates a PME */ 1253#define WOL_PATT_MATCH_PME_ALL 0x7f 1254 1255 1256/* 1257 * Marvel-PHY Registers, indirect addressed over GMAC 1258 */ 1259#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */ 1260#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */ 1261#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ 1262#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ 1263#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ 1264#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ 1265#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ 1266#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */ 1267#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ 1268 /* Marvel-specific registers */ 1269#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */ 1270#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ 1271 /* 0x0b - 0x0e: reserved */ 1272#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ 1273#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Control Reg */ 1274#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Status Reg */ 1275#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */ 1276#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ 1277#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */ 1278#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */ 1279#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */ 1280#define PHY_MARV_PORT_IRQ 0x17 /* 16 bit r/o Port 0 IRQ (88E1111 only) */ 1281#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */ 1282#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */ 1283#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */ 1284#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */ 1285#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */ 1286#define PHY_MARV_PAGE_ADDR 0x1d /* 16 bit r/w Extended Page Address Reg */ 1287#define PHY_MARV_PAGE_DATA 0x1e /* 16 bit r/w Extended Page Data Reg */ 1288 1289/* for 10/100 Fast Ethernet PHY (88E3082 only) */ 1290#define PHY_MARV_FE_LED_PAR 0x16 /* 16 bit r/w LED Parallel Select Reg. */ 1291#define PHY_MARV_FE_LED_SER 0x17 /* 16 bit r/w LED Stream Select S. LED */ 1292#define PHY_MARV_FE_VCT_TX 0x1a /* 16 bit r/w VCT Reg. for TXP/N Pins */ 1293#define PHY_MARV_FE_VCT_RX 0x1b /* 16 bit r/o VCT Reg. for RXP/N Pins */ 1294#define PHY_MARV_FE_SPEC_2 0x1c /* 16 bit r/w Specific Control Reg. 2 */ 1295 1296#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */ 1297#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */ 1298#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: Speed select, lower bit */ 1299#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */ 1300#define PHY_CT_PDOWN (1<<11) /* Bit 11: Power Down Mode */ 1301#define PHY_CT_ISOL (1<<10) /* Bit 10: Isolate Mode */ 1302#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */ 1303#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */ 1304#define PHY_CT_COL_TST (1<<7) /* Bit 7: Collision Test enabled */ 1305#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: Speed select, upper bit */ 1306 1307#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */ 1308#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */ 1309#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */ 1310 1311#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */ 1312#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: Preamble Suppression */ 1313#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */ 1314#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occurred */ 1315#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */ 1316#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */ 1317#define PHY_ST_JAB_DET (1<<1) /* Bit 1: Jabber Detected */ 1318#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */ 1319 1320#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */ 1321#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */ 1322#define PHY_I1_REV_MSK 0xf /* Bit 3.. 0: Revision Number */ 1323 1324/* different Marvell PHY Ids */ 1325#define PHY_MARV_ID0_VAL 0x0141 /* Marvell Unique Identifier */ 1326 1327#define PHY_MARV_ID1_B0 0x0C23 /* Yukon (PHY 88E1011) */ 1328#define PHY_MARV_ID1_B2 0x0C25 /* Yukon-Plus (PHY 88E1011) */ 1329#define PHY_MARV_ID1_C2 0x0CC2 /* Yukon-EC (PHY 88E1111) */ 1330#define PHY_MARV_ID1_Y2 0x0C91 /* Yukon-2 (PHY 88E1112) */ 1331#define PHY_MARV_ID1_FE 0x0C83 /* Yukon-FE (PHY 88E3082 Rev.A1) */ 1332#define PHY_MARV_ID1_ECU 0x0CB0 /* Yukon-2 (PHY 88E1149 Rev.B2?) */ 1333 1334/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ 1335#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ 1336#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ 1337#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ 1338#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ 1339#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ 1340#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ 1341#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ 1342 1343/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ 1344/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/ 1345#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */ 1346#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */ 1347#define PHY_M_AN_RF BIT_13 /* Remote Fault */ 1348#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */ 1349#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */ 1350#define PHY_M_AN_100_T4 BIT_9 /* Not cap. 100Base-T4 (always 0) */ 1351#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */ 1352#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */ 1353#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */ 1354#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */ 1355#define PHY_M_AN_SEL_MSK (0x1f<<4) /* Bit 4.. 0: Selector Field Mask */ 1356 1357/* special defines for FIBER (88E1011S only) */ 1358#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */ 1359#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */ 1360#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */ 1361#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */ 1362 1363/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ 1364#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */ 1365#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */ 1366#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */ 1367#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */ 1368 1369/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ 1370#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ 1371#define PHY_M_1000C_MSE BIT_12 /* Manual Master/Slave Enable */ 1372#define PHY_M_1000C_MSC BIT_11 /* M/S Configuration (1=Master) */ 1373#define PHY_M_1000C_MPD BIT_10 /* Multi-Port Device */ 1374#define PHY_M_1000C_AFD BIT_9 /* Advertise Full Duplex */ 1375#define PHY_M_1000C_AHD BIT_8 /* Advertise Half Duplex */ 1376 1377/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ 1378#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */ 1379#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */ 1380#define PHY_M_PC_ASS_CRS_TX BIT_11 /* Assert CRS on Transmit */ 1381#define PHY_M_PC_FL_GOOD BIT_10 /* Force Link Good */ 1382#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */ 1383#define PHY_M_PC_ENA_EXT_D BIT_7 /* Enable Ext. Distance (10BT) */ 1384#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */ 1385#define PHY_M_PC_DIS_125CLK BIT_4 /* Disable 125 CLK */ 1386#define PHY_M_PC_MAC_POW_UP BIT_3 /* MAC Power up */ 1387#define PHY_M_PC_SQE_T_ENA BIT_2 /* SQE Test Enabled */ 1388#define PHY_M_PC_POL_R_DIS BIT_1 /* Polarity Reversal Disabled */ 1389#define PHY_M_PC_DIS_JABBER BIT_0 /* Disable Jabber */ 1390 1391#define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */ 1392#define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */ 1393 1394#define PHY_M_PC_MDI_XMODE(x) (SHIFT5(x) & PHY_M_PC_MDIX_MSK) 1395 1396#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ 1397#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ 1398#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ 1399 1400/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ 1401#define PHY_M_PC_DIS_LINK_P BIT_15 /* Disable Link Pulses */ 1402#define PHY_M_PC_DSC_MSK (7<<12) /* Bit 14..12: Downshift Counter */ 1403#define PHY_M_PC_DOWN_S_ENA BIT_11 /* Downshift Enable */ 1404 /* !!! Errata in spec. (1 = disable) */ 1405 1406#define PHY_M_PC_DSC(x) (SHIFT12(x) & PHY_M_PC_DSC_MSK) 1407 /* 000=1x; 001=2x; 010=3x; 011=4x */ 1408 /* 100=5x; 101=6x; 110=7x; 111=8x */ 1409 1410/* for 10/100 Fast Ethernet PHY (88E3082 only) */ 1411#define PHY_M_PC_ENA_DTE_DT BIT_15 /* Enable Data Terminal Equ. (DTE) Detect */ 1412#define PHY_M_PC_ENA_ENE_DT BIT_14 /* Enable Energy Detect (sense & pulse) */ 1413#define PHY_M_PC_DIS_NLP_CK BIT_13 /* Disable Normal Link Puls (NLP) Check */ 1414#define PHY_M_PC_ENA_LIP_NP BIT_12 /* Enable Link Partner Next Page Reg. */ 1415#define PHY_M_PC_DIS_NLP_GN BIT_11 /* Disable Normal Link Puls Generation */ 1416#define PHY_M_PC_DIS_SCRAMB BIT_9 /* Disable Scrambler */ 1417#define PHY_M_PC_DIS_FEFI BIT_8 /* Disable Far End Fault Indic. (FEFI) */ 1418#define PHY_M_PC_SH_TP_SEL BIT_6 /* Shielded Twisted Pair Select */ 1419#define PHY_M_PC_RX_FD_MSK (3<<2) /* Bit 3.. 2: Rx FIFO Depth Mask */ 1420 1421/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ 1422#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */ 1423#define PHY_M_PS_SPEED_1000 BIT_15 /* 10 = 1000 Mbps */ 1424#define PHY_M_PS_SPEED_100 BIT_14 /* 01 = 100 Mbps */ 1425#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */ 1426#define PHY_M_PS_FULL_DUP BIT_13 /* Full Duplex */ 1427#define PHY_M_PS_PAGE_REC BIT_12 /* Page Received */ 1428#define PHY_M_PS_SPDUP_RES BIT_11 /* Speed & Duplex Resolved */ 1429#define PHY_M_PS_LINK_UP BIT_10 /* Link Up */ 1430#define PHY_M_PS_CABLE_MSK (7<<7) /* Bit 9.. 7: Cable Length Mask */ 1431#define PHY_M_PS_MDI_X_STAT BIT_6 /* MDI Crossover Stat (1=MDIX) */ 1432#define PHY_M_PS_DOWNS_STAT BIT_5 /* Downshift Status (1=downsh.) */ 1433#define PHY_M_PS_ENDET_STAT BIT_4 /* Energy Detect Status (1=act) */ 1434#define PHY_M_PS_TX_P_EN BIT_3 /* Tx Pause Enabled */ 1435#define PHY_M_PS_RX_P_EN BIT_2 /* Rx Pause Enabled */ 1436#define PHY_M_PS_POL_REV BIT_1 /* Polarity Reversed */ 1437#define PHY_M_PS_JABBER BIT_0 /* Jabber */ 1438 1439#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) 1440 1441/* for 10/100 Fast Ethernet PHY (88E3082 only) */ 1442#define PHY_M_PS_DTE_DETECT BIT_15 /* Data Terminal Equipment (DTE) Detected */ 1443#define PHY_M_PS_RES_SPEED BIT_14 /* Resolved Speed (1=100 Mbps, 0=10 Mbps */ 1444 1445/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ 1446/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/ 1447#define PHY_M_IS_AN_ERROR BIT_15 /* Auto-Negotiation Error */ 1448#define PHY_M_IS_LSP_CHANGE BIT_14 /* Link Speed Changed */ 1449#define PHY_M_IS_DUP_CHANGE BIT_13 /* Duplex Mode Changed */ 1450#define PHY_M_IS_AN_PR BIT_12 /* Page Received */ 1451#define PHY_M_IS_AN_COMPL BIT_11 /* Auto-Negotiation Completed */ 1452#define PHY_M_IS_LST_CHANGE BIT_10 /* Link Status Changed */ 1453#define PHY_M_IS_SYMB_ERROR BIT_9 /* Symbol Error */ 1454#define PHY_M_IS_FALSE_CARR BIT_8 /* False Carrier */ 1455#define PHY_M_IS_FIFO_ERROR BIT_7 /* FIFO Overflow/Underrun Error */ 1456#define PHY_M_IS_MDI_CHANGE BIT_6 /* MDI Crossover Changed */ 1457#define PHY_M_IS_DOWNSH_DET BIT_5 /* Downshift Detected */ 1458#define PHY_M_IS_END_CHANGE BIT_4 /* Energy Detect Changed */ 1459#define PHY_M_IS_DTE_CHANGE BIT_2 /* DTE Power Det. Status Changed */ 1460#define PHY_M_IS_POL_CHANGE BIT_1 /* Polarity Changed */ 1461#define PHY_M_IS_JABBER BIT_0 /* Jabber */ 1462 1463#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \ 1464 PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) 1465 1466/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ 1467#define PHY_M_EC_ENA_BC_EXT BIT_15 /* Enable Block Carr. Ext. (88E1111 only) */ 1468#define PHY_M_EC_ENA_LIN_LB BIT_14 /* Enable Line Loopback (88E1111 only) */ 1469#define PHY_M_EC_DIS_LINK_P BIT_12 /* Disable Link Pulses (88E1111 only) */ 1470#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master Downshift Counter */ 1471 /* (88E1011 only) */ 1472#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave Downshift Counter */ 1473 /* (88E1011 only) */ 1474#define PHY_M_EC_DSC_MSK_2 (7<<9) /* Bit 11.. 9: Downshift Counter */ 1475 /* (88E1111 only) */ 1476#define PHY_M_EC_DOWN_S_ENA BIT_8 /* Downshift Enable (88E1111 only) */ 1477 /* !!! Errata in spec. (1 = disable) */ 1478#define PHY_M_EC_RX_TIM_CT BIT_7 /* RGMII Rx Timing Control*/ 1479#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */ 1480#define PHY_M_EC_FIB_AN_ENA BIT_3 /* Fiber Auto-Neg. Enable (88E1011S only) */ 1481#define PHY_M_EC_DTE_D_ENA BIT_2 /* DTE Detect Enable (88E1111 only) */ 1482#define PHY_M_EC_TX_TIM_CT BIT_1 /* RGMII Tx Timing Control */ 1483#define PHY_M_EC_TRANS_DIS BIT_0 /* Transmitter Disable (88E1111 only) */ 1484 1485#define PHY_M_EC_M_DSC(x) (SHIFT10(x) & PHY_M_EC_M_DSC_MSK) 1486 /* 00=1x; 01=2x; 10=3x; 11=4x */ 1487#define PHY_M_EC_S_DSC(x) (SHIFT8(x) & PHY_M_EC_S_DSC_MSK) 1488 /* 00=dis; 01=1x; 10=2x; 11=3x */ 1489#define PHY_M_EC_MAC_S(x) (SHIFT4(x) & PHY_M_EC_MAC_S_MSK) 1490 /* 01X=0; 110=2.5; 111=25 (MHz) */ 1491 1492#define PHY_M_EC_DSC_2(x) (SHIFT9(x) & PHY_M_EC_DSC_MSK_2) 1493 /* 000=1x; 001=2x; 010=3x; 011=4x */ 1494 /* 100=5x; 101=6x; 110=7x; 111=8x */ 1495#define MAC_TX_CLK_0_MHZ 2 1496#define MAC_TX_CLK_2_5_MHZ 6 1497#define MAC_TX_CLK_25_MHZ 7 1498 1499/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ 1500#define PHY_M_LEDC_DIS_LED BIT_15 /* Disable LED */ 1501#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */ 1502#define PHY_M_LEDC_F_INT BIT_11 /* Force Interrupt */ 1503#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */ 1504#define PHY_M_LEDC_DP_C_LSB BIT_7 /* Duplex Control (LSB, 88E1111 only) */ 1505#define PHY_M_LEDC_TX_C_LSB BIT_6 /* Tx Control (LSB, 88E1111 only) */ 1506#define PHY_M_LEDC_LK_C_MSK (7<<3) /* Bit 5.. 3: Link Control Mask */ 1507 /* (88E1111 only) */ 1508#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */ 1509 /* (88E1011 only) */ 1510#define PHY_M_LEDC_DP_CTRL BIT_2 /* Duplex Control */ 1511#define PHY_M_LEDC_DP_C_MSB BIT_2 /* Duplex Control (MSB, 88E1111 only) */ 1512#define PHY_M_LEDC_RX_CTRL BIT_1 /* Rx Activity / Link */ 1513#define PHY_M_LEDC_TX_CTRL BIT_0 /* Tx Activity / Link */ 1514#define PHY_M_LEDC_TX_C_MSB BIT_0 /* Tx Control (MSB, 88E1111 only) */ 1515 1516#define PHY_M_LED_PULS_DUR(x) (SHIFT12(x) & PHY_M_LEDC_PULS_MSK) 1517 1518#define PULS_NO_STR 0 /* no pulse stretching */ 1519#define PULS_21MS 1 /* 21 ms to 42 ms */ 1520#define PULS_42MS 2 /* 42 ms to 84 ms */ 1521#define PULS_84MS 3 /* 84 ms to 170 ms */ 1522#define PULS_170MS 4 /* 170 ms to 340 ms */ 1523#define PULS_340MS 5 /* 340 ms to 670 ms */ 1524#define PULS_670MS 6 /* 670 ms to 1.3 s */ 1525#define PULS_1300MS 7 /* 1.3 s to 2.7 s */ 1526 1527#define PHY_M_LED_BLINK_RT(x) (SHIFT8(x) & PHY_M_LEDC_BL_R_MSK) 1528 1529#define BLINK_42MS 0 /* 42 ms */ 1530#define BLINK_84MS 1 /* 84 ms */ 1531#define BLINK_170MS 2 /* 170 ms */ 1532#define BLINK_340MS 3 /* 340 ms */ 1533#define BLINK_670MS 4 /* 670 ms */ 1534 1535/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ 1536#define PHY_M_LED_MO_SGMII(x) SHIFT14(x) /* Bit 15..14: SGMII AN Timer */ 1537#define PHY_M_LED_MO_DUP(x) SHIFT10(x) /* Bit 11..10: Duplex */ 1538#define PHY_M_LED_MO_10(x) SHIFT8(x) /* Bit 9.. 8: Link 10 */ 1539#define PHY_M_LED_MO_100(x) SHIFT6(x) /* Bit 7.. 6: Link 100 */ 1540#define PHY_M_LED_MO_1000(x) SHIFT4(x) /* Bit 5.. 4: Link 1000 */ 1541#define PHY_M_LED_MO_RX(x) SHIFT2(x) /* Bit 3.. 2: Rx */ 1542#define PHY_M_LED_MO_TX(x) SHIFT0(x) /* Bit 1.. 0: Tx */ 1543 1544#define MO_LED_NORM 0 1545#define MO_LED_BLINK 1 1546#define MO_LED_OFF 2 1547#define MO_LED_ON 3 1548 1549/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ 1550#define PHY_M_EC2_FI_IMPED BIT_6 /* Fiber Input Impedance */ 1551#define PHY_M_EC2_FO_IMPED BIT_5 /* Fiber Output Impedance */ 1552#define PHY_M_EC2_FO_M_CLK BIT_4 /* Fiber Mode Clock Enable */ 1553#define PHY_M_EC2_FO_BOOST BIT_3 /* Fiber Output Boost */ 1554#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */ 1555 1556/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ 1557#define PHY_M_FC_AUTO_SEL BIT_15 /* Fiber/Copper Auto Sel. Dis. */ 1558#define PHY_M_FC_AN_REG_ACC BIT_14 /* Fiber/Copper AN Reg. Access */ 1559#define PHY_M_FC_RESOLUTION BIT_13 /* Fiber/Copper Resolution */ 1560#define PHY_M_SER_IF_AN_BP BIT_12 /* Ser. IF AN Bypass Enable */ 1561#define PHY_M_SER_IF_BP_ST BIT_11 /* Ser. IF AN Bypass Status */ 1562#define PHY_M_IRQ_POLARITY BIT_10 /* IRQ polarity */ 1563#define PHY_M_DIS_AUT_MED BIT_9 /* Disable Aut. Medium Reg. Selection */ 1564 /* (88E1111 only) */ 1565#define PHY_M_UNDOC1 BIT_7 /* undocumented bit !! */ 1566#define PHY_M_DTE_POW_STAT BIT_4 /* DTE Power Status (88E1111 only) */ 1567#define PHY_M_MODE_MASK 0xf /* Bit 3.. 0: copy of HWCFG MODE[3:0] */ 1568 1569/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ 1570#define PHY_M_CABD_ENA_TEST BIT_15 /* Enable Test (Page 0) */ 1571#define PHY_M_CABD_DIS_WAIT BIT_15 /* Disable Waiting Period (Page 1) */ 1572 /* (88E1111 only) */ 1573#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status Mask */ 1574#define PHY_M_CABD_AMPL_MSK (0x1f<<8) /* Bit 12.. 8: Amplitude Mask */ 1575 /* (88E1111 only) */ 1576#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance Mask */ 1577 1578/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ 1579#define CABD_STAT_NORMAL 0 1580#define CABD_STAT_SHORT 1 1581#define CABD_STAT_OPEN 2 1582#define CABD_STAT_FAIL 3 1583 1584/* for 10/100 Fast Ethernet PHY (88E3082 only) */ 1585/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/ 1586#define PHY_M_FELP_LED2_MSK (0xf<<8) /* Bit 11.. 8: LED2 Mask (LINK) */ 1587#define PHY_M_FELP_LED1_MSK (0xf<<4) /* Bit 7.. 4: LED1 Mask (ACT) */ 1588#define PHY_M_FELP_LED0_MSK 0xf /* Bit 3.. 0: LED0 Mask (SPEED) */ 1589 1590#define PHY_M_FELP_LED2_CTRL(x) (SHIFT8(x) & PHY_M_FELP_LED2_MSK) 1591#define PHY_M_FELP_LED1_CTRL(x) (SHIFT4(x) & PHY_M_FELP_LED1_MSK) 1592#define PHY_M_FELP_LED0_CTRL(x) (SHIFT0(x) & PHY_M_FELP_LED0_MSK) 1593 1594#define LED_PAR_CTRL_COLX 0x00 1595#define LED_PAR_CTRL_ERROR 0x01 1596#define LED_PAR_CTRL_DUPLEX 0x02 1597#define LED_PAR_CTRL_DP_COL 0x03 1598#define LED_PAR_CTRL_SPEED 0x04 1599#define LED_PAR_CTRL_LINK 0x05 1600#define LED_PAR_CTRL_TX 0x06 1601#define LED_PAR_CTRL_RX 0x07 1602#define LED_PAR_CTRL_ACT 0x08 1603#define LED_PAR_CTRL_LNK_RX 0x09 1604#define LED_PAR_CTRL_LNK_AC 0x0a 1605#define LED_PAR_CTRL_ACT_BL 0x0b 1606#define LED_PAR_CTRL_TX_BL 0x0c 1607#define LED_PAR_CTRL_RX_BL 0x0d 1608#define LED_PAR_CTRL_COL_BL 0x0e 1609#define LED_PAR_CTRL_INACT 0x0f 1610 1611/***** PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/ 1612#define PHY_M_FESC_DIS_WAIT BIT_2 /* Disable TDR Waiting Period */ 1613#define PHY_M_FESC_ENA_MCLK BIT_1 /* Enable MAC Rx Clock in sleep mode */ 1614#define PHY_M_FESC_SEL_CL_A BIT_0 /* Select Class A driver (100B-TX) */ 1615 1616/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ 1617/***** PHY_MARV_PHY_CTRL (page 1) 16 bit r/w Fiber Specific Ctrl *****/ 1618#define PHY_M_FIB_FORCE_LNK BIT_10 /* Force Link Good */ 1619#define PHY_M_FIB_SIGD_POL BIT_9 /* SIGDET Polarity */ 1620#define PHY_M_FIB_TX_DIS BIT_3 /* Transmitter Disable */ 1621 1622/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ 1623#define PHY_M_MAC_MD_MSK (7<<7) /* Bit 9.. 7: Mode Select Mask */ 1624#define PHY_M_MAC_MD_AUTO 3 /* Auto Copper/1000Base-X */ 1625#define PHY_M_MAC_MD_COPPER 5 /* Copper only */ 1626#define PHY_M_MAC_MD_1000BX 7 /* 1000Base-X only */ 1627#define PHY_M_MAC_MODE_SEL(x) (SHIFT7(x) & PHY_M_MAC_MD_MSK) 1628 1629/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ 1630#define PHY_M_LEDC_LOS_MSK (0xf<<12) /* Bit 15..12: LOS LED Ctrl. Mask */ 1631#define PHY_M_LEDC_INIT_MSK (0xf<<8) /* Bit 11.. 8: INIT LED Ctrl. Mask */ 1632#define PHY_M_LEDC_STA1_MSK (0xf<<4) /* Bit 7.. 4: STAT1 LED Ctrl. Mask */ 1633#define PHY_M_LEDC_STA0_MSK 0xf /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ 1634 1635#define PHY_M_LEDC_LOS_CTRL(x) (SHIFT12(x) & PHY_M_LEDC_LOS_MSK) 1636#define PHY_M_LEDC_INIT_CTRL(x) (SHIFT8(x) & PHY_M_LEDC_INIT_MSK) 1637#define PHY_M_LEDC_STA1_CTRL(x) (SHIFT4(x) & PHY_M_LEDC_STA1_MSK) 1638#define PHY_M_LEDC_STA0_CTRL(x) (SHIFT0(x) & PHY_M_LEDC_STA0_MSK) 1639 1640/***** PHY_MARV_PHY_STAT (page 3) 16 bit r/w Polarity Control Reg. *****/ 1641#define PHY_M_POLC_LS1M_MSK (0xf<<12) /* Bit 15..12: LOS,STAT1 Mix % Mask */ 1642#define PHY_M_POLC_IS0M_MSK (0xf<<8) /* Bit 11.. 8: INIT,STAT0 Mix % Mask */ 1643#define PHY_M_POLC_LOS_MSK (0x3<<6) /* Bit 7.. 6: LOS Pol. Ctrl. Mask */ 1644#define PHY_M_POLC_INIT_MSK (0x3<<4) /* Bit 5.. 4: INIT Pol. Ctrl. Mask */ 1645#define PHY_M_POLC_STA1_MSK (0x3<<2) /* Bit 3.. 2: STAT1 Pol. Ctrl. Mask */ 1646#define PHY_M_POLC_STA0_MSK 0x3 /* Bit 1.. 0: STAT0 Pol. Ctrl. Mask */ 1647 1648#define PHY_M_POLC_LS1_P_MIX(x) (SHIFT12(x) & PHY_M_POLC_LS1M_MSK) 1649#define PHY_M_POLC_IS0_P_MIX(x) (SHIFT8(x) & PHY_M_POLC_IS0M_MSK) 1650#define PHY_M_POLC_LOS_CTRL(x) (SHIFT6(x) & PHY_M_POLC_LOS_MSK) 1651#define PHY_M_POLC_INIT_CTRL(x) (SHIFT4(x) & PHY_M_POLC_INIT_MSK) 1652#define PHY_M_POLC_STA1_CTRL(x) (SHIFT2(x) & PHY_M_POLC_STA1_MSK) 1653#define PHY_M_POLC_STA0_CTRL(x) (SHIFT0(x) & PHY_M_POLC_STA0_MSK) 1654 1655/* 1656 * GMAC registers 1657 * 1658 * The GMAC registers are 16 or 32 bits wide. 1659 * The GMACs host processor interface is 16 bits wide, 1660 * therefore ALL registers will be addressed with 16 bit accesses. 1661 * 1662 * Note: NA reg = Network Address e.g DA, SA etc. 1663 */ 1664 1665/* Port Registers */ 1666#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */ 1667#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */ 1668#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */ 1669#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */ 1670#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */ 1671#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */ 1672#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */ 1673 1674/* Source Address Registers */ 1675#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */ 1676#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */ 1677#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */ 1678#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */ 1679#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */ 1680#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */ 1681 1682/* Multicast Address Hash Registers */ 1683#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */ 1684#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */ 1685#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */ 1686#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */ 1687 1688/* Interrupt Source Registers */ 1689#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */ 1690#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */ 1691#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */ 1692 1693/* Interrupt Mask Registers */ 1694#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */ 1695#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */ 1696#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */ 1697 1698/* Serial Management Interface (SMI) Registers */ 1699#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */ 1700#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */ 1701#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */ 1702 1703/* MIB Counters */ 1704#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ 1705#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ 1706 1707/* 1708 * MIB Counters base address definitions (low word) - 1709 * use offset 4 for access to high word (32 bit r/o) 1710 */ 1711#define GM_RXF_UC_OK \ 1712 (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */ 1713#define GM_RXF_BC_OK \ 1714 (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */ 1715#define GM_RXF_MPAUSE \ 1716 (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */ 1717#define GM_RXF_MC_OK \ 1718 (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */ 1719#define GM_RXF_FCS_ERR \ 1720 (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */ 1721#define GM_RXF_SPARE1 \ 1722 (GM_MIB_CNT_BASE + 40) /* Rx spare 1 */ 1723#define GM_RXO_OK_LO \ 1724 (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */ 1725#define GM_RXO_OK_HI \ 1726 (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */ 1727#define GM_RXO_ERR_LO \ 1728 (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */ 1729#define GM_RXO_ERR_HI \ 1730 (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */ 1731#define GM_RXF_SHT \ 1732 (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */ 1733#define GM_RXE_FRAG \ 1734 (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */ 1735#define GM_RXF_64B \ 1736 (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */ 1737#define GM_RXF_127B \ 1738 (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */ 1739#define GM_RXF_255B \ 1740 (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */ 1741#define GM_RXF_511B \ 1742 (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */ 1743#define GM_RXF_1023B \ 1744 (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */ 1745#define GM_RXF_1518B \ 1746 (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */ 1747#define GM_RXF_MAX_SZ \ 1748 (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */ 1749#define GM_RXF_LNG_ERR \ 1750 (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */ 1751#define GM_RXF_JAB_PKT \ 1752 (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */ 1753#define GM_RXF_SPARE2 \ 1754 (GM_MIB_CNT_BASE + 168) /* Rx spare 2 */ 1755#define GM_RXE_FIFO_OV \ 1756 (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */ 1757#define GM_RXF_SPARE3 \ 1758 (GM_MIB_CNT_BASE + 184) /* Rx spare 3 */ 1759#define GM_TXF_UC_OK \ 1760 (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */ 1761#define GM_TXF_BC_OK \ 1762 (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */ 1763#define GM_TXF_MPAUSE \ 1764 (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */ 1765#define GM_TXF_MC_OK \ 1766 (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */ 1767#define GM_TXO_OK_LO \ 1768 (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */ 1769#define GM_TXO_OK_HI \ 1770 (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */ 1771#define GM_TXF_64B \ 1772 (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */ 1773#define GM_TXF_127B \ 1774 (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */ 1775#define GM_TXF_255B \ 1776 (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */ 1777#define GM_TXF_511B \ 1778 (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */ 1779#define GM_TXF_1023B \ 1780 (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */ 1781#define GM_TXF_1518B \ 1782 (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */ 1783#define GM_TXF_MAX_SZ \ 1784 (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */ 1785#define GM_TXF_SPARE1 \ 1786 (GM_MIB_CNT_BASE + 296) /* Tx spare 1 */ 1787#define GM_TXF_COL \ 1788 (GM_MIB_CNT_BASE + 304) /* Tx Collision */ 1789#define GM_TXF_LAT_COL \ 1790 (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */ 1791#define GM_TXF_ABO_COL \ 1792 (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */ 1793#define GM_TXF_MUL_COL \ 1794 (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */ 1795#define GM_TXF_SNG_COL \ 1796 (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */ 1797#define GM_TXE_FIFO_UR \ 1798 (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */ 1799 1800/*----------------------------------------------------------------------------*/ 1801/* 1802 * GMAC Bit Definitions 1803 * 1804 * If the bit access behaviour differs from the register access behaviour 1805 * (r/w, r/o) this is documented after the bit number. 1806 * The following bit access behaviours are used: 1807 * (sc) self clearing 1808 * (r/o) read only 1809 */ 1810 1811/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ 1812#define GM_GPSR_SPEED BIT_15 /* Port Speed (1 = 100 Mbps) */ 1813#define GM_GPSR_DUPLEX BIT_14 /* Duplex Mode (1 = Full) */ 1814#define GM_GPSR_FC_TX_DIS BIT_13 /* Tx Flow-Control Mode Disabled */ 1815#define GM_GPSR_LINK_UP BIT_12 /* Link Up Status */ 1816#define GM_GPSR_PAUSE BIT_11 /* Pause State */ 1817#define GM_GPSR_TX_ACTIVE BIT_10 /* Tx in Progress */ 1818#define GM_GPSR_EXC_COL BIT_9 /* Excessive Collisions Occurred */ 1819#define GM_GPSR_LAT_COL BIT_8 /* Late Collisions Occurred */ 1820#define GM_GPSR_PHY_ST_CH BIT_5 /* PHY Status Change */ 1821#define GM_GPSR_GIG_SPEED BIT_4 /* Gigabit Speed (1 = 1000 Mbps) */ 1822#define GM_GPSR_PART_MODE BIT_3 /* Partition mode */ 1823#define GM_GPSR_FC_RX_DIS BIT_2 /* Rx Flow-Control Mode Disabled */ 1824 1825/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ 1826#define GM_GPCR_RMII_PH_ENA BIT_15 /* Enable RMII for PHY (Yukon-FE only) */ 1827#define GM_GPCR_RMII_LB_ENA BIT_14 /* Enable RMII Loopback (Yukon-FE only) */ 1828#define GM_GPCR_FC_TX_DIS BIT_13 /* Disable Tx Flow-Control Mode */ 1829#define GM_GPCR_TX_ENA BIT_12 /* Enable Transmit */ 1830#define GM_GPCR_RX_ENA BIT_11 /* Enable Receive */ 1831#define GM_GPCR_LOOP_ENA BIT_9 /* Enable MAC Loopback Mode */ 1832#define GM_GPCR_PART_ENA BIT_8 /* Enable Partition Mode */ 1833#define GM_GPCR_GIGS_ENA BIT_7 /* Gigabit Speed (1000 Mbps) */ 1834#define GM_GPCR_FL_PASS BIT_6 /* Force Link Pass */ 1835#define GM_GPCR_DUP_FULL BIT_5 /* Full Duplex Mode */ 1836#define GM_GPCR_FC_RX_DIS BIT_4 /* Disable Rx Flow-Control Mode */ 1837#define GM_GPCR_SPEED_100 BIT_3 /* Port Speed 100 Mbps */ 1838#define GM_GPCR_AU_DUP_DIS BIT_2 /* Disable Auto-Update Duplex */ 1839#define GM_GPCR_AU_FCT_DIS BIT_1 /* Disable Auto-Update Flow-C. */ 1840#define GM_GPCR_AU_SPD_DIS BIT_0 /* Disable Auto-Update Speed */ 1841 1842#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) 1843#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\ 1844 GM_GPCR_AU_SPD_DIS) 1845 1846/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ 1847#define GM_TXCR_FORCE_JAM BIT_15 /* Force Jam / Flow-Control */ 1848#define GM_TXCR_CRC_DIS BIT_14 /* Disable insertion of CRC */ 1849#define GM_TXCR_PAD_DIS BIT_13 /* Disable padding of packets */ 1850#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold Mask */ 1851#define GM_TXCR_PAD_PAT_MSK 0xff /* Bit 7.. 0: Padding Pattern Mask */ 1852 /* (Yukon-2 only) */ 1853 1854#define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK) 1855#define TX_COL_DEF 0x04 1856 1857/* GM_RX_CTRL 16 bit r/w Receive Control Register */ 1858#define GM_RXCR_UCF_ENA BIT_15 /* Enable Unicast filtering */ 1859#define GM_RXCR_MCF_ENA BIT_14 /* Enable Multicast filtering */ 1860#define GM_RXCR_CRC_DIS BIT_13 /* Remove 4-byte CRC */ 1861#define GM_RXCR_PASS_FC BIT_12 /* Pass FC packets to FIFO (Yukon-1 only) */ 1862 1863/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ 1864#define GM_TXPA_JAMLEN_MSK (3<<14) /* Bit 15..14: Jam Length Mask */ 1865#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13.. 9: Jam IPG Mask */ 1866#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8.. 4: IPG Jam to Data Mask */ 1867#define GM_TXPA_BO_LIM_MSK 0x0f /* Bit 3.. 0: Backoff Limit Mask */ 1868 /* (Yukon-2 only) */ 1869 1870#define TX_JAM_LEN_VAL(x) (SHIFT14(x) & GM_TXPA_JAMLEN_MSK) 1871#define TX_JAM_IPG_VAL(x) (SHIFT9(x) & GM_TXPA_JAMIPG_MSK) 1872#define TX_IPG_JAM_DATA(x) (SHIFT4(x) & GM_TXPA_JAMDAT_MSK) 1873#define TX_BACK_OFF_LIM(x) ((x) & GM_TXPA_BO_LIM_MSK) 1874 1875#define TX_JAM_LEN_DEF 0x03 1876#define TX_JAM_IPG_DEF 0x0b 1877#define TX_IPG_JAM_DEF 0x1c 1878#define TX_BOF_LIM_DEF 0x04 1879 1880/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ 1881#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder */ 1882 /* r/o on Yukon, r/w on Yukon-EC */ 1883#define GM_SMOD_LIMIT_4 BIT_10 /* 4 consecutive Tx trials */ 1884#define GM_SMOD_VLAN_ENA BIT_9 /* Enable VLAN (Max. Frame Len) */ 1885#define GM_SMOD_JUMBO_ENA BIT_8 /* Enable Jumbo (Max. Frame Len) */ 1886#define GM_SMOD_IPG_MSK 0x1f /* Bit 4.. 0: Inter-Packet Gap (IPG) */ 1887 1888#define DATA_BLIND_VAL(x) (SHIFT11(x) & GM_SMOD_DATABL_MSK) 1889#define IPG_DATA_VAL(x) ((x) & GM_SMOD_IPG_MSK) 1890 1891#define DATA_BLIND_DEF 0x04 1892#define IPG_DATA_DEF 0x1e 1893 1894/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ 1895#define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */ 1896#define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */ 1897#define GM_SMI_CT_OP_RD BIT_5 /* OpCode Read (0=Write)*/ 1898#define GM_SMI_CT_RD_VAL BIT_4 /* Read Valid (Read completed) */ 1899#define GM_SMI_CT_BUSY BIT_3 /* Busy (Operation in progress) */ 1900 1901#define GM_SMI_CT_PHY_AD(x) (SHIFT11(x) & GM_SMI_CT_PHY_A_MSK) 1902#define GM_SMI_CT_REG_AD(x) (SHIFT6(x) & GM_SMI_CT_REG_A_MSK) 1903 1904/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ 1905#define GM_PAR_MIB_CLR BIT_5 /* Set MIB Clear Counter Mode */ 1906#define GM_PAR_MIB_TST BIT_4 /* MIB Load Counter (Test Mode) */ 1907 1908/* Receive Frame Status Encoding */ 1909#define GMR_FS_LEN_MSK (0xffff<<16) /* Bit 31..16: Rx Frame Length */ 1910#define GMR_FS_VLAN BIT_13 /* VLAN Packet */ 1911#define GMR_FS_JABBER BIT_12 /* Jabber Packet */ 1912#define GMR_FS_UN_SIZE BIT_11 /* Undersize Packet */ 1913#define GMR_FS_MC BIT_10 /* Multicast Packet */ 1914#define GMR_FS_BC BIT_9 /* Broadcast Packet */ 1915#define GMR_FS_RX_OK BIT_8 /* Receive OK (Good Packet) */ 1916#define GMR_FS_GOOD_FC BIT_7 /* Good Flow-Control Packet */ 1917#define GMR_FS_BAD_FC BIT_6 /* Bad Flow-Control Packet */ 1918#define GMR_FS_MII_ERR BIT_5 /* MII Error */ 1919#define GMR_FS_LONG_ERR BIT_4 /* Too Long Packet */ 1920#define GMR_FS_FRAGMENT BIT_3 /* Fragment */ 1921#define GMR_FS_CRC_ERR BIT_1 /* CRC Error */ 1922#define GMR_FS_RX_FF_OV BIT_0 /* Rx FIFO Overflow */ 1923 1924#define GMR_FS_LEN_SHIFT 16 1925 1926#define GMR_FS_ANY_ERR ( \ 1927 GMR_FS_RX_FF_OV | \ 1928 GMR_FS_CRC_ERR | \ 1929 GMR_FS_FRAGMENT | \ 1930 GMR_FS_LONG_ERR | \ 1931 GMR_FS_MII_ERR | \ 1932 GMR_FS_BAD_FC | \ 1933 GMR_FS_GOOD_FC | \ 1934 GMR_FS_UN_SIZE | \ 1935 GMR_FS_JABBER) 1936 1937/* Rx GMAC FIFO Flush Mask (default) */ 1938#define RX_FF_FL_DEF_MSK GMR_FS_ANY_ERR 1939 1940/* Receive and Transmit GMAC FIFO Registers (YUKON only) */ 1941 1942/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ 1943/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ 1944/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ 1945/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ 1946/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ 1947/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ 1948/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ 1949/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ 1950/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ 1951/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Pointer */ 1952/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ 1953/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ 1954/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ 1955/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ 1956 1957/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ 1958#define RX_TRUNC_ON BIT_27 /* enable packet truncation */ 1959#define RX_TRUNC_OFF BIT_26 /* disable packet truncation */ 1960#define RX_VLAN_STRIP_ON BIT_25 /* enable VLAN stripping */ 1961#define RX_VLAN_STRIP_OFF BIT_24 /* disable VLAN stripping */ 1962#define GMF_RX_MACSEC_FLUSH_ON BIT_23 1963#define GMF_RX_MACSEC_FLUSH_OFF BIT_22 1964#define GMF_RX_OVER_ON BIT_19 /* enable flushing on receive overrun */ 1965#define GMF_RX_OVER_OFF BIT_18 /* disable flushing on receive overrun */ 1966#define GMF_ASF_RX_OVER_ON BIT_17 /* enable flushing of ASF when overrun */ 1967#define GMF_ASF_RX_OVER_OFF BIT_16 /* disable flushing of ASF when overrun */ 1968#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */ 1969#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ 1970#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */ 1971#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */ 1972#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ 1973#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */ 1974#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */ 1975#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */ 1976#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */ 1977#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */ 1978#define GMF_OPER_ON BIT_3 /* Operational Mode On */ 1979#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */ 1980#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */ 1981#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */ 1982 1983/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test (YUKON and Yukon-2) */ 1984#define TX_STFW_DIS BIT_31 /* Disable Store & Forward (Yukon-EC Ultra) */ 1985#define TX_STFW_ENA BIT_30 /* Enable Store & Forward (Yukon-EC Ultra) */ 1986#define TX_VLAN_TAG_ON BIT_25 /* enable VLAN tagging */ 1987#define TX_VLAN_TAG_OFF BIT_24 /* disable VLAN tagging */ 1988#define TX_JUMBO_ENA BIT_23 /* Enable Jumbo Mode (Yukon-EC Ultra) */ 1989#define TX_JUMBO_DIS BIT_22 /* Disable Jumbo Mode (Yukon-EC Ultra) */ 1990#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */ 1991#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */ 1992#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */ 1993 /* Bits 15..8: same as for RX_GMF_CTRL_T */ 1994#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */ 1995#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */ 1996#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */ 1997 /* Bits 3..0: same as for RX_GMF_CTRL_T */ 1998 1999#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON) 2000#define GMF_TX_CTRL_DEF GMF_OPER_ON 2001 2002#define RX_GMF_AF_THR_MIN 0x0c /* Rx GMAC FIFO Almost Full Thresh. min. */ 2003#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */ 2004 2005/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ 2006#define GMT_ST_START BIT_2 /* Start Time Stamp Timer */ 2007#define GMT_ST_STOP BIT_1 /* Stop Time Stamp Timer */ 2008#define GMT_ST_CLR_IRQ BIT_0 /* Clear Time Stamp Timer IRQ */ 2009 2010/* POLL_CTRL 32 bit Polling Unit control register (Yukon-2 only) */ 2011#define PC_CLR_IRQ_CHK BIT_5 /* Clear IRQ Check */ 2012#define PC_POLL_RQ BIT_4 /* Poll Request Start */ 2013#define PC_POLL_OP_ON BIT_3 /* Operational Mode On */ 2014#define PC_POLL_OP_OFF BIT_2 /* Operational Mode Off */ 2015#define PC_POLL_RST_CLR BIT_1 /* Clear Polling Unit Reset (Enable) */ 2016#define PC_POLL_RST_SET BIT_0 /* Set Polling Unit Reset */ 2017 2018/* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */ 2019/* This register is used by the host driver software */ 2020#define Y2_ASF_OS_PRES BIT_4 /* ASF operation system present */ 2021#define Y2_ASF_RESET BIT_3 /* ASF system in reset state */ 2022#define Y2_ASF_RUNNING BIT_2 /* ASF system operational */ 2023#define Y2_ASF_CLR_HSTI BIT_1 /* Clear ASF IRQ */ 2024#define Y2_ASF_IRQ BIT_0 /* Issue an IRQ to ASF system */ 2025 2026#define Y2_ASF_UC_STATE (3<<2) /* ASF uC State */ 2027#define Y2_ASF_CLK_HALT 0 /* ASF system clock stopped */ 2028 2029/* B28_Y2_ASF_HCU_CCSR 32bit CPU Control and Status Register (Yukon EX) */ 2030#define Y2_ASF_HCU_CCSR_SMBALERT_MONITOR BIT_27 /* SMBALERT pin monitor */ 2031#define Y2_ASF_HCU_CCSR_CPU_SLEEP BIT_26 /* CPU sleep status */ 2032#define Y2_ASF_HCU_CCSR_CS_TO BIT_25 /* Clock Stretching Timeout */ 2033#define Y2_ASF_HCU_CCSR_WDOG BIT_24 /* Watchdog Reset */ 2034#define Y2_ASF_HCU_CCSR_CLR_IRQ_HOST BIT_17 /* Clear IRQ_HOST */ 2035#define Y2_ASF_HCU_CCSR_SET_IRQ_HCU BIT_16 /* Set IRQ_HCU */ 2036#define Y2_ASF_HCU_CCSR_AHB_RST BIT_9 /* Reset AHB bridge */ 2037#define Y2_ASF_HCU_CCSR_CPU_RST_MODE BIT_8 /* CPU Reset Mode */ 2038#define Y2_ASF_HCU_CCSR_SET_SYNC_CPU BIT_5 2039#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE1 BIT_4 2040#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE0 BIT_3 2041#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_MSK (BIT_4 | BIT_3) /* CPU Clock Divide */ 2042#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_BASE BIT_3 2043#define Y2_ASF_HCU_CCSR_OS_PRSNT BIT_2 /* ASF OS Present */ 2044 /* Microcontroller State */ 2045#define Y2_ASF_HCU_CCSR_UC_STATE_MSK 3 2046#define Y2_ASF_HCU_CCSR_UC_STATE_BASE BIT_0 2047#define Y2_ASF_HCU_CCSR_ASF_RESET 0 2048#define Y2_ASF_HCU_CCSR_ASF_HALTED BIT_1 2049#define Y2_ASF_HCU_CCSR_ASF_RUNNING BIT_0 2050 2051/* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */ 2052/* This register is used by the ASF firmware */ 2053#define Y2_ASF_CLR_ASFI BIT_1 /* Clear host IRQ */ 2054#define Y2_ASF_HOST_IRQ BIT_0 /* Issue an IRQ to HOST system */ 2055 2056/* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */ 2057#define SC_STAT_CLR_IRQ BIT_4 /* Status Burst IRQ clear */ 2058#define SC_STAT_OP_ON BIT_3 /* Operational Mode On */ 2059#define SC_STAT_OP_OFF BIT_2 /* Operational Mode Off */ 2060#define SC_STAT_RST_CLR BIT_1 /* Clear Status Unit Reset (Enable) */ 2061#define SC_STAT_RST_SET BIT_0 /* Set Status Unit Reset */ 2062 2063/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ 2064#define GMC_SEC_RST BIT_15 /* MAC SEC RST */ 2065#define GMC_SEC_RST_OFF BIT_14 /* MAC SEC RST Off */ 2066#define GMC_BYP_MACSECRX_ON BIT_13 /* Bypass MAC SEC RX */ 2067#define GMC_BYP_MACSECRX_OFF BIT_12 /* Bypass MAC SEC RX Off */ 2068#define GMC_BYP_MACSECTX_ON BIT_11 /* Bypass MAC SEC TX */ 2069#define GMC_BYP_MACSECTX_OFF BIT_10 /* Bypass MAC SEC TX Off */ 2070#define GMC_BYP_RETR_ON BIT_9 /* Bypass MAC retransmit FIFO On */ 2071#define GMC_BYP_RETR_OFF BIT_8 /* Bypass MAC retransmit FIFO Off */ 2072#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */ 2073#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */ 2074#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */ 2075#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */ 2076#define GMC_PAUSE_ON BIT_3 /* Pause On */ 2077#define GMC_PAUSE_OFF BIT_2 /* Pause Off */ 2078#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */ 2079#define GMC_RST_SET BIT_0 /* Set GMAC Reset */ 2080 2081/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ 2082#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */ 2083#define GPC_INT_POL BIT_27 /* IRQ Polarity is Active Low */ 2084#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */ 2085#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */ 2086#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */ 2087#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */ 2088#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */ 2089#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */ 2090#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */ 2091#define GPC_ANEG_0 BIT_19 /* ANEG[0] */ 2092#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */ 2093#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ 2094#define GPC_ANEG_3 BIT_16 /* ANEG[3] */ 2095#define GPC_ANEG_2 BIT_15 /* ANEG[2] */ 2096#define GPC_ANEG_1 BIT_14 /* ANEG[1] */ 2097#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */ 2098#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */ 2099#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */ 2100#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */ 2101#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */ 2102#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */ 2103#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */ 2104#define GPC_RST_SET BIT_0 /* Set GPHY Reset */ 2105 2106/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ 2107/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ 2108#define GM_IS_RX_CO_OV BIT_5 /* Receive Counter Overflow IRQ */ 2109#define GM_IS_TX_CO_OV BIT_4 /* Transmit Counter Overflow IRQ */ 2110#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */ 2111#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */ 2112#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */ 2113#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */ 2114 2115#define GMAC_DEF_MSK (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV | GM_IS_TX_FF_UR) 2116 2117/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ 2118#define GMLC_RST_CLR BIT_1 /* Clear GMAC Link Reset */ 2119#define GMLC_RST_SET BIT_0 /* Set GMAC Link Reset */ 2120 2121#define MSK_PORT_A 0 2122#define MSK_PORT_B 1 2123 2124/* Register access macros */ 2125#define CSR_WRITE_4(sc, reg, val) \ 2126 bus_write_4((sc)->msk_res[0], (reg), (val)) 2127#define CSR_WRITE_2(sc, reg, val) \ 2128 bus_write_2((sc)->msk_res[0], (reg), (val)) 2129#define CSR_WRITE_1(sc, reg, val) \ 2130 bus_write_1((sc)->msk_res[0], (reg), (val)) 2131 2132#define CSR_READ_4(sc, reg) \ 2133 bus_read_4((sc)->msk_res[0], (reg)) 2134#define CSR_READ_2(sc, reg) \ 2135 bus_read_2((sc)->msk_res[0], (reg)) 2136#define CSR_READ_1(sc, reg) \ 2137 bus_read_1((sc)->msk_res[0], (reg)) 2138 2139#define CSR_PCI_WRITE_4(sc, reg, val) \ 2140 bus_write_4((sc)->msk_res[0], Y2_CFG_SPC + (reg), (val)) 2141#define CSR_PCI_WRITE_2(sc, reg, val) \ 2142 bus_write_2((sc)->msk_res[0], Y2_CFG_SPC + (reg), (val)) 2143#define CSR_PCI_WRITE_1(sc, reg, val) \ 2144 bus_write_1((sc)->msk_res[0], Y2_CFG_SPC + (reg), (val)) 2145 2146#define CSR_PCI_READ_4(sc, reg) \ 2147 bus_read_4((sc)->msk_res[0], Y2_CFG_SPC + (reg)) 2148#define CSR_PCI_READ_2(sc, reg) \ 2149 bus_read_2((sc)->msk_res[0], Y2_CFG_SPC + (reg)) 2150#define CSR_PCI_READ_1(sc, reg) \ 2151 bus_read_1((sc)->msk_res[0], Y2_CFG_SPC + (reg)) 2152 2153#define MSK_IF_READ_4(sc_if, reg) \ 2154 CSR_READ_4((sc_if)->msk_softc, (reg)) 2155#define MSK_IF_READ_2(sc_if, reg) \ 2156 CSR_READ_2((sc_if)->msk_softc, (reg)) 2157#define MSK_IF_READ_1(sc_if, reg) \ 2158 CSR_READ_1((sc_if)->msk_softc, (reg)) 2159 2160#define MSK_IF_WRITE_4(sc_if, reg, val) \ 2161 CSR_WRITE_4((sc_if)->msk_softc, (reg), (val)) 2162#define MSK_IF_WRITE_2(sc_if, reg, val) \ 2163 CSR_WRITE_2((sc_if)->msk_softc, (reg), (val)) 2164#define MSK_IF_WRITE_1(sc_if, reg, val) \ 2165 CSR_WRITE_1((sc_if)->msk_softc, (reg), (val)) 2166 2167#define GMAC_REG(port, reg) \ 2168 ((BASE_GMAC_1 + (port) * (BASE_GMAC_2 - BASE_GMAC_1)) | (reg)) 2169#define GMAC_WRITE_2(sc, port, reg, val) \ 2170 CSR_WRITE_2((sc), GMAC_REG((port), (reg)), (val)) 2171#define GMAC_READ_2(sc, port, reg) \ 2172 CSR_READ_2((sc), GMAC_REG((port), (reg))) 2173 2174/* GPHY address (bits 15..11 of SMI control reg) */ 2175#define PHY_ADDR_MARV 0 2176 2177#define MSK_ADDR_LO(x) ((uint64_t) (x) & 0xffffffffUL) 2178#define MSK_ADDR_HI(x) ((uint64_t) (x) >> 32) 2179 2180#define MSK_RING_ALIGN 32768 2181#define MSK_STAT_ALIGN 32768 2182 2183/* Rx descriptor data structure */ 2184struct msk_rx_desc { 2185 uint32_t msk_addr; 2186 uint32_t msk_control; 2187}; 2188 2189/* Tx descriptor data structure */ 2190struct msk_tx_desc { 2191 uint32_t msk_addr; 2192 uint32_t msk_control; 2193}; 2194 2195/* Status descriptor data structure */ 2196struct msk_stat_desc { 2197 uint32_t msk_status; 2198 uint32_t msk_control; 2199}; 2200 2201/* mask and shift value to get Tx async queue status for port 1 */ 2202#define STLE_TXA1_MSKL 0x00000fff 2203#define STLE_TXA1_SHIFTL 0 2204 2205/* mask and shift value to get Tx sync queue status for port 1 */ 2206#define STLE_TXS1_MSKL 0x00fff000 2207#define STLE_TXS1_SHIFTL 12 2208 2209/* mask and shift value to get Tx async queue status for port 2 */ 2210#define STLE_TXA2_MSKL 0xff000000 2211#define STLE_TXA2_SHIFTL 24 2212#define STLE_TXA2_MSKH 0x000f 2213/* this one shifts up */ 2214#define STLE_TXA2_SHIFTH 8 2215 2216/* mask and shift value to get Tx sync queue status for port 2 */ 2217#define STLE_TXS2_MSKL 0x00000000 2218#define STLE_TXS2_SHIFTL 0 2219#define STLE_TXS2_MSKH 0xfff0 2220#define STLE_TXS2_SHIFTH 4 2221 2222/* YUKON-2 bit values */ 2223#define HW_OWNER 0x80000000 2224#define SW_OWNER 0x00000000 2225 2226#define PU_PUTIDX_VALID 0x10000000 2227 2228/* YUKON-2 Control flags */ 2229#define UDPTCP 0x00010000 2230#define CALSUM 0x00020000 2231#define WR_SUM 0x00040000 2232#define INIT_SUM 0x00080000 2233#define LOCK_SUM 0x00100000 2234#define INS_VLAN 0x00200000 2235#define FRC_STAT 0x00400000 2236#define EOP 0x00800000 2237 2238#define TX_LOCK 0x01000000 2239#define BUF_SEND 0x02000000 2240#define PACKET_SEND 0x04000000 2241 2242#define NO_WARNING 0x40000000 2243#define NO_UPDATE 0x80000000 2244 2245/* YUKON-2 Rx/Tx opcodes defines */ 2246#define OP_TCPWRITE 0x11000000 2247#define OP_TCPSTART 0x12000000 2248#define OP_TCPINIT 0x14000000 2249#define OP_TCPLCK 0x18000000 2250#define OP_TCPCHKSUM OP_TCPSTART 2251#define OP_TCPIS (OP_TCPINIT | OP_TCPSTART) 2252#define OP_TCPLW (OP_TCPLCK | OP_TCPWRITE) 2253#define OP_TCPLSW (OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE) 2254#define OP_TCPLISW (OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE) 2255#define OP_ADDR64 0x21000000 2256#define OP_VLAN 0x22000000 2257#define OP_ADDR64VLAN (OP_ADDR64 | OP_VLAN) 2258#define OP_LRGLEN 0x24000000 2259#define OP_LRGLENVLAN (OP_LRGLEN | OP_VLAN) 2260#define OP_MSS 0x28000000 2261#define OP_MSSVLAN (OP_MSS | OP_VLAN) 2262#define OP_BUFFER 0x40000000 2263#define OP_PACKET 0x41000000 2264#define OP_LARGESEND 0x43000000 2265 2266/* YUKON-2 STATUS opcodes defines */ 2267#define OP_RXSTAT 0x60000000 2268#define OP_RXTIMESTAMP 0x61000000 2269#define OP_RXVLAN 0x62000000 2270#define OP_RXCHKS 0x64000000 2271#define OP_RXCHKSVLAN (OP_RXCHKS | OP_RXVLAN) 2272#define OP_RXTIMEVLAN (OP_RXTIMESTAMP | OP_RXVLAN) 2273#define OP_RSS_HASH 0x65000000 2274#define OP_TXINDEXLE 0x68000000 2275 2276/* YUKON-2 SPECIAL opcodes defines */ 2277#define OP_PUTIDX 0x70000000 2278 2279#define STLE_OP_MASK 0xff000000 2280#define STLE_CSS_MASK 0x00ff0000 2281#define STLE_LEN_MASK 0x0000ffff 2282 2283/* CSS defined in status LE(valid for descriptor V2 format). */ 2284#define CSS_TCPUDP_CSUM_OK 0x00800000 2285#define CSS_UDP 0x00400000 2286#define CSS_TCP 0x00200000 2287#define CSS_IPFRAG 0x00100000 2288#define CSS_IPV6 0x00080000 2289#define CSS_IPV4_CSUM_OK 0x00040000 2290#define CSS_IPV4 0x00020000 2291#define CSS_PORT 0x00010000 2292 2293/* Descriptor Bit Definition */ 2294/* TxCtrl Transmit Buffer Control Field */ 2295/* RxCtrl Receive Buffer Control Field */ 2296#define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */ 2297#define BMU_STF BIT_30 /* Start of Frame */ 2298#define BMU_EOF BIT_29 /* End of Frame */ 2299#define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */ 2300#define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */ 2301/* TxCtrl specific bits */ 2302#define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */ 2303#define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */ 2304#define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */ 2305/* RxCtrl specific bits */ 2306#define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */ 2307#define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */ 2308#define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */ 2309 /* Bit 23..16: BMU Check Opcodes */ 2310#define BMU_CHECK (0x55<<16) /* Default BMU check */ 2311#define BMU_TCP_CHECK (0x56<<16) /* Descr with TCP ext */ 2312#define BMU_UDP_CHECK (0x57<<16) /* Descr with UDP ext (YUKON only) */ 2313#define BMU_BBC 0xffff /* Bit 15.. 0: Buffer Byte Counter */ 2314 2315/* 2316 * Controller requires an additional LE op code for 64bit DMA operation. 2317 * Driver uses fixed number of RX buffers such that this limitation 2318 * reduces number of available RX buffers with 64bit DMA so double 2319 * number of RX buffers on platforms that support 64bit DMA. For TX 2320 * side, controller requires an additional OP_ADDR64 op code if a TX 2321 * buffer uses different high address value than previously used one. 2322 * Driver monitors high DMA address change in TX and inserts an 2323 * OP_ADDR64 op code if the high DMA address is changed. Driver 2324 * allocates 50% more total TX buffers on platforms that support 64bit 2325 * DMA. 2326 */ 2327#if (BUS_SPACE_MAXADDR > 0xFFFFFFFF) 2328#define MSK_64BIT_DMA 2329#define MSK_TX_RING_CNT 384 2330#define MSK_RX_RING_CNT 512 2331#else 2332#undef MSK_64BIT_DMA 2333#define MSK_TX_RING_CNT 256 2334#define MSK_RX_RING_CNT 256 2335#endif 2336#define MSK_RX_BUF_ALIGN 8 2337#define MSK_JUMBO_RX_RING_CNT MSK_RX_RING_CNT 2338#define MSK_MAXTXSEGS 35 2339#define MSK_TSO_MAXSGSIZE 4096 2340#define MSK_TSO_MAXSIZE (65535 + sizeof(struct ether_vlan_header)) 2341 2342/* 2343 * It seems that the hardware requires extra descriptors(LEs) to offload 2344 * TCP/UDP checksum, VLAN hardware tag insertion and TSO. 2345 * 2346 * 1 descriptor for TCP/UDP checksum offload. 2347 * 1 descriptor VLAN hardware tag insertion. 2348 * 1 descriptor for TSO(TCP Segmentation Offload) 2349 * 1 descriptor for each 64bits DMA transfers 2350 */ 2351#ifdef MSK_64BIT_DMA 2352#define MSK_RESERVED_TX_DESC_CNT (MSK_MAXTXSEGS + 3) 2353#else 2354#define MSK_RESERVED_TX_DESC_CNT 3 2355#endif 2356 2357#define MSK_JUMBO_FRAMELEN 9022 2358#define MSK_JUMBO_MTU (MSK_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) 2359#define MSK_MAX_FRAMELEN \ 2360 (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN - ETHER_CRC_LEN) 2361#define MSK_MIN_FRAMELEN (ETHER_MIN_LEN - ETHER_CRC_LEN) 2362 2363struct msk_txdesc { 2364 struct mbuf *tx_m; 2365 bus_dmamap_t tx_dmamap; 2366 struct msk_tx_desc *tx_le; 2367}; 2368 2369struct msk_rxdesc { 2370 struct mbuf *rx_m; 2371 bus_dmamap_t rx_dmamap; 2372 struct msk_rx_desc *rx_le; 2373}; 2374 2375struct msk_chain_data { 2376 bus_dma_tag_t msk_parent_tag; 2377 bus_dma_tag_t msk_tx_tag; 2378 struct msk_txdesc msk_txdesc[MSK_TX_RING_CNT]; 2379 bus_dma_tag_t msk_rx_tag; 2380 struct msk_rxdesc msk_rxdesc[MSK_RX_RING_CNT]; 2381 bus_dma_tag_t msk_tx_ring_tag; 2382 bus_dma_tag_t msk_rx_ring_tag; 2383 bus_dmamap_t msk_tx_ring_map; 2384 bus_dmamap_t msk_rx_ring_map; 2385 bus_dmamap_t msk_rx_sparemap; 2386 bus_dma_tag_t msk_jumbo_rx_tag; 2387 struct msk_rxdesc msk_jumbo_rxdesc[MSK_JUMBO_RX_RING_CNT]; 2388 bus_dma_tag_t msk_jumbo_rx_ring_tag; 2389 bus_dmamap_t msk_jumbo_rx_ring_map; 2390 bus_dmamap_t msk_jumbo_rx_sparemap; 2391 uint16_t msk_tso_mtu; 2392 uint32_t msk_last_csum; 2393 uint32_t msk_tx_high_addr; 2394 int msk_tx_prod; 2395 int msk_tx_cons; 2396 int msk_tx_cnt; 2397 int msk_tx_put; 2398 int msk_rx_cons; 2399 int msk_rx_prod; 2400 int msk_rx_putwm; 2401}; 2402 2403struct msk_ring_data { 2404 struct msk_tx_desc *msk_tx_ring; 2405 bus_addr_t msk_tx_ring_paddr; 2406 struct msk_rx_desc *msk_rx_ring; 2407 bus_addr_t msk_rx_ring_paddr; 2408 struct msk_rx_desc *msk_jumbo_rx_ring; 2409 bus_addr_t msk_jumbo_rx_ring_paddr; 2410}; 2411 2412#define MSK_TX_RING_ADDR(sc, i) \ 2413 ((sc)->msk_rdata.msk_tx_ring_paddr + sizeof(struct msk_tx_desc) * (i)) 2414#define MSK_RX_RING_ADDR(sc, i) \ 2415 ((sc)->msk_rdata.msk_rx_ring_paddr + sizeof(struct msk_rx_desc) * (i)) 2416#define MSK_JUMBO_RX_RING_ADDR(sc, i) \ 2417 ((sc)->msk_rdata.msk_jumbo_rx_ring_paddr + sizeof(struct msk_rx_desc) * (i)) 2418 2419#define MSK_TX_RING_SZ \ 2420 (sizeof(struct msk_tx_desc) * MSK_TX_RING_CNT) 2421#define MSK_RX_RING_SZ \ 2422 (sizeof(struct msk_rx_desc) * MSK_RX_RING_CNT) 2423#define MSK_JUMBO_RX_RING_SZ \ 2424 (sizeof(struct msk_rx_desc) * MSK_JUMBO_RX_RING_CNT) 2425 2426#define MSK_INC(x, y) (x) = (x + 1) % y 2427#ifdef MSK_64BIT_DMA 2428#define MSK_RX_INC(x, y) (x) = (x + 2) % y 2429#define MSK_RX_BUF_CNT (MSK_RX_RING_CNT / 2) 2430#define MSK_JUMBO_RX_BUF_CNT (MSK_JUMBO_RX_RING_CNT / 2) 2431#else 2432#define MSK_RX_INC(x, y) (x) = (x + 1) % y 2433#define MSK_RX_BUF_CNT MSK_RX_RING_CNT 2434#define MSK_JUMBO_RX_BUF_CNT MSK_JUMBO_RX_RING_CNT 2435#endif 2436 2437#define MSK_PCI_BUS 0 2438#define MSK_PCIX_BUS 1 2439#define MSK_PEX_BUS 2 2440 2441#define MSK_PROC_DEFAULT (MSK_RX_RING_CNT / 2) 2442#define MSK_PROC_MIN 30 2443#define MSK_PROC_MAX (MSK_RX_RING_CNT - 1) 2444 2445#define MSK_INT_HOLDOFF_DEFAULT 100 2446 2447#define MSK_TX_TIMEOUT 5 2448#define MSK_PUT_WM 10 2449 2450struct msk_mii_data { 2451 int port; 2452 uint32_t pmd; 2453 int mii_flags; 2454}; 2455 2456/* Forward decl. */ 2457struct msk_if_softc; 2458 2459struct msk_hw_stats { 2460 /* Rx stats. */ 2461 uint32_t rx_ucast_frames; 2462 uint32_t rx_bcast_frames; 2463 uint32_t rx_pause_frames; 2464 uint32_t rx_mcast_frames; 2465 uint32_t rx_crc_errs; 2466 uint32_t rx_spare1; 2467 uint64_t rx_good_octets; 2468 uint64_t rx_bad_octets; 2469 uint32_t rx_runts; 2470 uint32_t rx_runt_errs; 2471 uint32_t rx_pkts_64; 2472 uint32_t rx_pkts_65_127; 2473 uint32_t rx_pkts_128_255; 2474 uint32_t rx_pkts_256_511; 2475 uint32_t rx_pkts_512_1023; 2476 uint32_t rx_pkts_1024_1518; 2477 uint32_t rx_pkts_1519_max; 2478 uint32_t rx_pkts_too_long; 2479 uint32_t rx_pkts_jabbers; 2480 uint32_t rx_spare2; 2481 uint32_t rx_fifo_oflows; 2482 uint32_t rx_spare3; 2483 /* Tx stats. */ 2484 uint32_t tx_ucast_frames; 2485 uint32_t tx_bcast_frames; 2486 uint32_t tx_pause_frames; 2487 uint32_t tx_mcast_frames; 2488 uint64_t tx_octets; 2489 uint32_t tx_pkts_64; 2490 uint32_t tx_pkts_65_127; 2491 uint32_t tx_pkts_128_255; 2492 uint32_t tx_pkts_256_511; 2493 uint32_t tx_pkts_512_1023; 2494 uint32_t tx_pkts_1024_1518; 2495 uint32_t tx_pkts_1519_max; 2496 uint32_t tx_spare1; 2497 uint32_t tx_colls; 2498 uint32_t tx_late_colls; 2499 uint32_t tx_excess_colls; 2500 uint32_t tx_multi_colls; 2501 uint32_t tx_single_colls; 2502 uint32_t tx_underflows; 2503}; 2504 2505/* Softc for the Marvell Yukon II controller. */ 2506struct msk_softc { 2507 struct resource *msk_res[1]; /* I/O resource */ 2508 struct resource_spec *msk_res_spec; 2509 struct resource *msk_irq[1]; /* IRQ resources */ 2510 struct resource_spec *msk_irq_spec; 2511 void *msk_intrhand; /* irq handler handle */ 2512 device_t msk_dev; 2513 uint8_t msk_hw_id; 2514 uint8_t msk_hw_rev; 2515 uint8_t msk_bustype; 2516 uint8_t msk_num_port; 2517 int msk_expcap; 2518 int msk_pcixcap; 2519 int msk_ramsize; /* amount of SRAM on NIC */ 2520 uint32_t msk_pmd; /* physical media type */ 2521 uint32_t msk_intrmask; 2522 uint32_t msk_intrhwemask; 2523 uint32_t msk_pflags; 2524 int msk_clock; 2525 struct msk_if_softc *msk_if[2]; 2526 device_t msk_devs[2]; 2527 int msk_txqsize; 2528 int msk_rxqsize; 2529 int msk_txqstart[2]; 2530 int msk_txqend[2]; 2531 int msk_rxqstart[2]; 2532 int msk_rxqend[2]; 2533 bus_dma_tag_t msk_stat_tag; 2534 bus_dmamap_t msk_stat_map; 2535 struct msk_stat_desc *msk_stat_ring; 2536 bus_addr_t msk_stat_ring_paddr; 2537 int msk_int_holdoff; 2538 int msk_process_limit; 2539 int msk_stat_cons; 2540 int msk_stat_count; 2541 struct mtx msk_mtx; 2542#ifdef __HAIKU__ 2543 uint32_t haiku_interrupt_status; 2544#endif 2545}; 2546 2547#define MSK_LOCK(_sc) mtx_lock(&(_sc)->msk_mtx) 2548#define MSK_UNLOCK(_sc) mtx_unlock(&(_sc)->msk_mtx) 2549#define MSK_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->msk_mtx, MA_OWNED) 2550#define MSK_IF_LOCK(_sc) MSK_LOCK((_sc)->msk_softc) 2551#define MSK_IF_UNLOCK(_sc) MSK_UNLOCK((_sc)->msk_softc) 2552#define MSK_IF_LOCK_ASSERT(_sc) MSK_LOCK_ASSERT((_sc)->msk_softc) 2553 2554#define MSK_USECS(sc, us) ((sc)->msk_clock * (us)) 2555 2556/* Softc for each logical interface. */ 2557struct msk_if_softc { 2558 struct ifnet *msk_ifp; /* interface info */ 2559 device_t msk_miibus; 2560 device_t msk_if_dev; 2561 int32_t msk_port; /* port # on controller */ 2562 int msk_framesize; 2563 int msk_phytype; 2564 int msk_phyaddr; 2565 uint32_t msk_flags; 2566#define MSK_FLAG_MSI 0x0001 2567#define MSK_FLAG_FASTETHER 0x0004 2568#define MSK_FLAG_JUMBO 0x0008 2569#define MSK_FLAG_JUMBO_NOCSUM 0x0010 2570#define MSK_FLAG_RAMBUF 0x0020 2571#define MSK_FLAG_DESCV2 0x0040 2572#define MSK_FLAG_AUTOTX_CSUM 0x0080 2573#define MSK_FLAG_NOHWVLAN 0x0100 2574#define MSK_FLAG_NORXCHK 0x0200 2575#define MSK_FLAG_NORX_CSUM 0x0400 2576#define MSK_FLAG_SUSPEND 0x2000 2577#define MSK_FLAG_DETACH 0x4000 2578#define MSK_FLAG_LINK 0x8000 2579 struct callout msk_tick_ch; 2580 int msk_watchdog_timer; 2581 uint32_t msk_txq; /* Tx. Async Queue offset */ 2582 uint32_t msk_txsq; /* Tx. Syn Queue offset */ 2583 uint32_t msk_rxq; /* Rx. Qeueue offset */ 2584 struct msk_chain_data msk_cdata; 2585 struct msk_ring_data msk_rdata; 2586 struct msk_softc *msk_softc; /* parent controller */ 2587 struct msk_hw_stats msk_stats; 2588 int msk_if_flags; 2589 uint16_t msk_vtag; /* VLAN tag id. */ 2590 uint32_t msk_csum; 2591}; 2592 2593#define MSK_TIMEOUT 1000 2594#define MSK_PHY_POWERUP 1 2595#define MSK_PHY_POWERDOWN 0 2596