1/* Target Definitions for R8C/M16C/M32C 2 Copyright (C) 2005-2015 Free Software Foundation, Inc. 3 Contributed by Red Hat. 4 5 This file is part of GCC. 6 7 GCC is free software; you can redistribute it and/or modify it 8 under the terms of the GNU General Public License as published 9 by the Free Software Foundation; either version 3, or (at your 10 option) any later version. 11 12 GCC is distributed in the hope that it will be useful, but WITHOUT 13 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 15 License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with GCC; see the file COPYING3. If not see 19 <http://www.gnu.org/licenses/>. */ 20 21#ifndef GCC_M32C_H 22#define GCC_M32C_H 23 24/* Controlling the Compilation Driver, `gcc'. */ 25 26#undef STARTFILE_SPEC 27#define STARTFILE_SPEC "crt0.o%s crtbegin.o%s" 28 29#undef ENDFILE_SPEC 30#define ENDFILE_SPEC "crtend.o%s crtn.o%s" 31 32#undef LINK_SPEC 33#define LINK_SPEC "%{h*} %{v:-V} \ 34 %{static:-Bstatic} %{shared:-shared} %{symbolic:-Bsymbolic}" 35 36/* There are four CPU series we support, but they basically break down 37 into two families - the R8C/M16C families, with 16-bit address 38 registers and one set of opcodes, and the M32CM/M32C group, with 39 24-bit address registers and a different set of opcodes. The 40 assembler doesn't care except for which opcode set is needed; the 41 big difference is in the memory maps, which we cover in 42 LIB_SPEC. */ 43 44#undef ASM_SPEC 45#define ASM_SPEC "\ 46%{mcpu=r8c:--m16c} \ 47%{mcpu=m16c:--m16c} \ 48%{mcpu=m32cm:--m32c} \ 49%{mcpu=m32c:--m32c} " 50 51/* The default is R8C hardware. We support a simulator, which has its 52 own libgloss and link map, plus one default link map for each chip 53 family. Most of the logic here is making sure we do the right 54 thing when no CPU is specified, which defaults to R8C. */ 55#undef LIB_SPEC 56#define LIB_SPEC "-( -lc %{msim:-lsim}%{!msim:-lnosys} -) \ 57%{msim:%{!T*: %{mcpu=m32cm:%Tsim24.ld}%{mcpu=m32c:%Tsim24.ld} \ 58 %{!mcpu=m32cm:%{!mcpu=m32c:%Tsim16.ld}}}} \ 59%{!T*:%{!msim: %{mcpu=m16c:%Tm16c.ld} \ 60 %{mcpu=m32cm:%Tm32cm.ld} \ 61 %{mcpu=m32c:%Tm32c.ld} \ 62 %{!mcpu=m16c:%{!mcpu=m32cm:%{!mcpu=m32c:%Tr8c.ld}}}}} \ 63" 64 65/* Run-time Target Specification */ 66 67/* Nothing unusual here. */ 68#define TARGET_CPU_CPP_BUILTINS() \ 69 { \ 70 builtin_assert ("cpu=m32c"); \ 71 builtin_assert ("machine=m32c"); \ 72 builtin_define ("__m32c__=1"); \ 73 if (TARGET_R8C) \ 74 builtin_define ("__r8c_cpu__=1"); \ 75 if (TARGET_M16C) \ 76 builtin_define ("__m16c_cpu__=1"); \ 77 if (TARGET_M32CM) \ 78 builtin_define ("__m32cm_cpu__=1"); \ 79 if (TARGET_M32C) \ 80 builtin_define ("__m32c_cpu__=1"); \ 81 } 82 83/* The pragma handlers need to know if we've started processing 84 functions yet, as the memregs pragma should only be given at the 85 beginning of the file. This variable starts off TRUE and later 86 becomes FALSE. */ 87extern int ok_to_change_target_memregs; 88 89/* TARGET_CPU is a multi-way option set in m32c.opt. While we could 90 use enums or defines for this, this and m32c.opt are the only 91 places that know (or care) what values are being used. */ 92#define TARGET_R8C (target_cpu == 'r') 93#define TARGET_M16C (target_cpu == '6') 94#define TARGET_M32CM (target_cpu == 'm') 95#define TARGET_M32C (target_cpu == '3') 96 97/* Address register sizes. Warning: these are used all over the place 98 to select between the two CPU families in general. */ 99#define TARGET_A16 (TARGET_R8C || TARGET_M16C) 100#define TARGET_A24 (TARGET_M32CM || TARGET_M32C) 101 102/* Defining data structures for per-function information */ 103 104typedef struct GTY (()) machine_function 105{ 106 /* How much we adjust the stack when returning from an exception 107 handler. */ 108 rtx eh_stack_adjust; 109 110 /* TRUE if the current function is an interrupt handler. */ 111 int is_interrupt; 112 113 /* TRUE if the current function is a leaf function. Currently, this 114 only affects saving $a0 in interrupt functions. */ 115 int is_leaf; 116 117 /* Bitmask that keeps track of which registers are used in an 118 interrupt function, so we know which ones need to be saved and 119 restored. */ 120 int intr_pushm; 121 /* Likewise, one element for each memreg that needs to be saved. */ 122 char intr_pushmem[16]; 123 124 /* TRUE if the current function can use a simple RTS to return, instead 125 of the longer ENTER/EXIT pair. */ 126 int use_rts; 127} 128machine_function; 129 130#define INIT_EXPANDERS m32c_init_expanders () 131 132/* Storage Layout */ 133 134#define BITS_BIG_ENDIAN 0 135#define BYTES_BIG_ENDIAN 0 136#define WORDS_BIG_ENDIAN 0 137 138/* We can do QI, HI, and SI operations pretty much equally well, but 139 GCC expects us to have a "native" format, so we pick the one that 140 matches "int". Pointers are 16 bits for R8C/M16C (when TARGET_A16 141 is true) and 24 bits for M32CM/M32C (when TARGET_A24 is true), but 142 24-bit pointers are stored in 32-bit words. */ 143#define UNITS_PER_WORD 2 144#define POINTER_SIZE (TARGET_A16 ? 16 : 32) 145#define POINTERS_EXTEND_UNSIGNED 1 146/* We have a problem with libgcc2. It only defines two versions of 147 each function, one for "int" and one for "long long". Ie it assumes 148 that "sizeof (int) == sizeof (long)". For the M32C this is not true 149 and we need a third set of functions. We explicitly define 150 LIBGCC2_UNITS_PER_WORD here so that it is clear that we are expecting 151 to get the SI and DI versions from the libgcc2.c sources, and we 152 provide our own set of HI functions in m32c-lib2.c, which is why this 153 definition is surrounded by #ifndef..#endif. */ 154#ifndef LIBGCC2_UNITS_PER_WORD 155#define LIBGCC2_UNITS_PER_WORD 4 156#endif 157 158/* These match the alignment enforced by the two types of stack operations. */ 159#define PARM_BOUNDARY (TARGET_A16 ? 8 : 16) 160#define STACK_BOUNDARY (TARGET_A16 ? 8 : 16) 161 162/* We do this because we care more about space than about speed. For 163 the chips with 16-bit busses, we could set these to 16 if 164 desired. */ 165#define FUNCTION_BOUNDARY 8 166#define BIGGEST_ALIGNMENT 8 167 168/* Since we have a maximum structure alignment of 8 there 169 is no need to enforce any alignment of bitfield types. */ 170#undef PCC_BITFIELD_TYPE_MATTERS 171#define PCC_BITFIELD_TYPE_MATTERS 0 172 173#define STRICT_ALIGNMENT 0 174#define SLOW_BYTE_ACCESS 1 175 176/* Layout of Source Language Data Types */ 177 178#define INT_TYPE_SIZE 16 179#define SHORT_TYPE_SIZE 16 180#define LONG_TYPE_SIZE 32 181#define LONG_LONG_TYPE_SIZE 64 182 183#define FLOAT_TYPE_SIZE 32 184#define DOUBLE_TYPE_SIZE 64 185#define LONG_DOUBLE_TYPE_SIZE 64 186 187#define DEFAULT_SIGNED_CHAR 1 188 189#undef PTRDIFF_TYPE 190#define PTRDIFF_TYPE (TARGET_A16 ? "int" : "long int") 191 192#undef UINTPTR_TYPE 193#define UINTPTR_TYPE (TARGET_A16 ? "unsigned int" : "long unsigned int") 194 195#undef SIZE_TYPE 196#define SIZE_TYPE "unsigned int" 197 198#undef WCHAR_TYPE 199#define WCHAR_TYPE "long int" 200 201#undef WCHAR_TYPE_SIZE 202#define WCHAR_TYPE_SIZE 32 203 204/* REGISTER USAGE */ 205 206/* Register Basics */ 207 208/* Register layout: 209 210 [r0h][r0l] $r0 (16 bits, or two 8-bit halves) 211 [--------] $r2 (16 bits) 212 [r1h][r1l] $r1 (16 bits, or two 8-bit halves) 213 [--------] $r3 (16 bits) 214 [---][--------] $a0 (might be 24 bits) 215 [---][--------] $a1 (might be 24 bits) 216 [---][--------] $sb (might be 24 bits) 217 [---][--------] $fb (might be 24 bits) 218 [---][--------] $sp (might be 24 bits) 219 [-------------] $pc (20 or 24 bits) 220 [---] $flg (CPU flags) 221 [---][--------] $argp (virtual) 222 [--------] $mem0 (all 16 bits) 223 . . . 224 [--------] $mem14 225*/ 226 227#define FIRST_PSEUDO_REGISTER 20 228 229/* Note that these two tables are modified based on which CPU family 230 you select; see m32c_conditional_register_usage for details. */ 231 232/* r0 r2 r1 r3 - a0 a1 sb fb - sp pc flg argp - mem0..mem14 */ 233#define FIXED_REGISTERS { 0, 0, 0, 0, \ 234 0, 0, 1, 0, \ 235 1, 1, 0, 1, \ 236 0, 0, 0, 0, 0, 0, 0, 0 } 237#define CALL_USED_REGISTERS { 1, 1, 1, 1, \ 238 1, 1, 1, 0, \ 239 1, 1, 1, 1, \ 240 1, 1, 1, 1, 1, 1, 1, 1 } 241 242/* The *_REGNO theme matches m32c.md and most register number 243 arguments; the PC_REGNUM is the odd one out. */ 244#ifndef PC_REGNO 245#define PC_REGNO 9 246#endif 247#define PC_REGNUM PC_REGNO 248 249/* Order of Allocation of Registers */ 250 251#define REG_ALLOC_ORDER { \ 252 0, 1, 2, 3, 4, 5, /* r0..r3, a0, a1 */ \ 253 12, 13, 14, 15, 16, 17, 18, 19, /* mem0..mem7 */ \ 254 6, 7, 8, 9, 10, 11 /* sb, fb, sp, pc, flg, ap */ } 255 256/* How Values Fit in Registers */ 257 258#define HARD_REGNO_NREGS(R,M) m32c_hard_regno_nregs (R, M) 259#define HARD_REGNO_MODE_OK(R,M) m32c_hard_regno_ok (R, M) 260#define MODES_TIEABLE_P(M1,M2) m32c_modes_tieable_p (M1, M2) 261#define AVOID_CCMODE_COPIES 262 263/* Register Classes */ 264 265/* Most registers are special purpose in some form or another, so this 266 table is pretty big. Class names are used for constraints also; 267 for example the HL_REGS class (HL below) is "Rhl" in the md files. 268 See m32c_reg_class_from_constraint for the mapping. There's some 269 duplication so that we can better isolate the reason for using 270 constraints in the md files from the actual registers used; for 271 example we may want to exclude a1a0 from SI_REGS in the future, 272 without precluding their use as HImode registers. */ 273 274/* m7654 - m3210 - argp flg pc sp - fb sb a1 a0 - r3 r1 r2 r0 */ 275/* mmPAR */ 276#define REG_CLASS_CONTENTS \ 277{ { 0x00000000 }, /* NO */\ 278 { 0x00000100 }, /* SP - sp */\ 279 { 0x00000080 }, /* FB - fb */\ 280 { 0x00000040 }, /* SB - sb */\ 281 { 0x000001c0 }, /* CR - sb fb sp */\ 282 { 0x00000001 }, /* R0 - r0 */\ 283 { 0x00000004 }, /* R1 - r1 */\ 284 { 0x00000002 }, /* R2 - r2 */\ 285 { 0x00000008 }, /* R3 - r3 */\ 286 { 0x00000003 }, /* R02 - r0r2 */\ 287 { 0x0000000c }, /* R13 - r1r3 */\ 288 { 0x00000005 }, /* HL - r0 r1 */\ 289 { 0x0000000a }, /* R23 - r2 r3 */\ 290 { 0x0000000f }, /* R03 - r0r2 r1r3 */\ 291 { 0x00000010 }, /* A0 - a0 */\ 292 { 0x00000020 }, /* A1 - a1 */\ 293 { 0x00000030 }, /* A - a0 a1 */\ 294 { 0x000000f0 }, /* AD - a0 a1 sb fp */\ 295 { 0x000001f0 }, /* PS - a0 a1 sb fp sp */\ 296 { 0x00000033 }, /* R02A - r0r2 a0 a1 */ \ 297 { 0x0000003f }, /* RA - r0 r1 r2 r3 a0 a1 */\ 298 { 0x0000007f }, /* GENERAL */\ 299 { 0x00000400 }, /* FLG */\ 300 { 0x000001ff }, /* HC - r0l r1 r2 r3 a0 a1 sb fb sp */\ 301 { 0x000ff000 }, /* MEM */\ 302 { 0x000ff003 }, /* R02_A_MEM */\ 303 { 0x000ff005 }, /* A_HL_MEM */\ 304 { 0x000ff00c }, /* R1_R3_A_MEM */\ 305 { 0x000ff00f }, /* R03_MEM */\ 306 { 0x000ff03f }, /* A_HI_MEM */\ 307 { 0x000ff0ff }, /* A_AD_CR_MEM_SI */\ 308 { 0x000ff5ff }, /* ALL */\ 309} 310 311#define QI_REGS HL_REGS 312#define HI_REGS RA_REGS 313#define SI_REGS R03_REGS 314#define DI_REGS R03_REGS 315 316enum reg_class 317{ 318 NO_REGS, 319 SP_REGS, 320 FB_REGS, 321 SB_REGS, 322 CR_REGS, 323 R0_REGS, 324 R1_REGS, 325 R2_REGS, 326 R3_REGS, 327 R02_REGS, 328 R13_REGS, 329 HL_REGS, 330 R23_REGS, 331 R03_REGS, 332 A0_REGS, 333 A1_REGS, 334 A_REGS, 335 AD_REGS, 336 PS_REGS, 337 R02A_REGS, 338 RA_REGS, 339 GENERAL_REGS, 340 FLG_REGS, 341 HC_REGS, 342 MEM_REGS, 343 R02_A_MEM_REGS, 344 A_HL_MEM_REGS, 345 R1_R3_A_MEM_REGS, 346 R03_MEM_REGS, 347 A_HI_MEM_REGS, 348 A_AD_CR_MEM_SI_REGS, 349 ALL_REGS, 350 LIM_REG_CLASSES 351}; 352 353#define N_REG_CLASSES LIM_REG_CLASSES 354 355#define REG_CLASS_NAMES {\ 356"NO_REGS", \ 357"SP_REGS", \ 358"FB_REGS", \ 359"SB_REGS", \ 360"CR_REGS", \ 361"R0_REGS", \ 362"R1_REGS", \ 363"R2_REGS", \ 364"R3_REGS", \ 365"R02_REGS", \ 366"R13_REGS", \ 367"HL_REGS", \ 368"R23_REGS", \ 369"R03_REGS", \ 370"A0_REGS", \ 371"A1_REGS", \ 372"A_REGS", \ 373"AD_REGS", \ 374"PS_REGS", \ 375"R02A_REGS", \ 376"RA_REGS", \ 377"GENERAL_REGS", \ 378"FLG_REGS", \ 379"HC_REGS", \ 380"MEM_REGS", \ 381"R02_A_MEM_REGS", \ 382"A_HL_MEM_REGS", \ 383"R1_R3_A_MEM_REGS", \ 384"R03_MEM_REGS", \ 385"A_HI_MEM_REGS", \ 386"A_AD_CR_MEM_SI_REGS", \ 387"ALL_REGS", \ 388} 389 390#define REGNO_REG_CLASS(R) m32c_regno_reg_class (R) 391 392/* We support simple displacements off address registers, nothing else. */ 393#define BASE_REG_CLASS A_REGS 394#define INDEX_REG_CLASS NO_REGS 395 396/* We primarily use the new "long" constraint names, with the initial 397 letter classifying the constraint type and following letters 398 specifying which. The types are: 399 400 I - integer values 401 R - register classes 402 S - memory references (M was used) 403 A - addresses (currently unused) 404*/ 405 406#define REGNO_OK_FOR_BASE_P(NUM) m32c_regno_ok_for_base_p (NUM) 407#define REGNO_OK_FOR_INDEX_P(NUM) 0 408 409#define LIMIT_RELOAD_CLASS(MODE,CLASS) \ 410 (enum reg_class) m32c_limit_reload_class (MODE, CLASS) 411 412#define SECONDARY_RELOAD_CLASS(CLASS,MODE,X) \ 413 (enum reg_class) m32c_secondary_reload_class (CLASS, MODE, X) 414 415#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true 416 417#define CANNOT_CHANGE_MODE_CLASS(F,T,C) m32c_cannot_change_mode_class(F,T,C) 418 419/* STACK AND CALLING */ 420 421/* Frame Layout */ 422 423/* Standard push/pop stack, no surprises here. */ 424 425#define STACK_GROWS_DOWNWARD 1 426#define STACK_PUSH_CODE PRE_DEC 427#define FRAME_GROWS_DOWNWARD 1 428 429#define STARTING_FRAME_OFFSET 0 430#define FIRST_PARM_OFFSET(F) 0 431 432#define RETURN_ADDR_RTX(COUNT,FA) m32c_return_addr_rtx (COUNT) 433 434#define INCOMING_RETURN_ADDR_RTX m32c_incoming_return_addr_rtx() 435#define INCOMING_FRAME_SP_OFFSET (TARGET_A24 ? 4 : 3) 436 437/* Exception Handling Support */ 438 439#define EH_RETURN_DATA_REGNO(N) m32c_eh_return_data_regno (N) 440#define EH_RETURN_STACKADJ_RTX m32c_eh_return_stackadj_rtx () 441 442/* Registers That Address the Stack Frame */ 443 444#ifndef FP_REGNO 445#define FP_REGNO 7 446#endif 447#ifndef SP_REGNO 448#define SP_REGNO 8 449#endif 450#define AP_REGNO 11 451 452#define STACK_POINTER_REGNUM SP_REGNO 453#define FRAME_POINTER_REGNUM FP_REGNO 454#define ARG_POINTER_REGNUM AP_REGNO 455 456/* The static chain must be pointer-capable. */ 457#define STATIC_CHAIN_REGNUM A0_REGNO 458 459#define DWARF_FRAME_REGISTERS 20 460#define DWARF_FRAME_REGNUM(N) m32c_dwarf_frame_regnum (N) 461#define DBX_REGISTER_NUMBER(N) m32c_dwarf_frame_regnum (N) 462 463#undef ASM_PREFERRED_EH_DATA_FORMAT 464/* This is the same as the default in practice, except that by making 465 it explicit we tell binutils what size pointers to use. */ 466#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \ 467 (TARGET_A16 ? DW_EH_PE_udata2 : DW_EH_PE_udata4) 468 469/* Eliminating Frame Pointer and Arg Pointer */ 470 471#define ELIMINABLE_REGS \ 472 {{AP_REGNO, SP_REGNO}, \ 473 {AP_REGNO, FB_REGNO}, \ 474 {FB_REGNO, SP_REGNO}} 475 476#define INITIAL_ELIMINATION_OFFSET(FROM,TO,VAR) \ 477 (VAR) = m32c_initial_elimination_offset(FROM,TO) 478 479/* Passing Function Arguments on the Stack */ 480 481#define PUSH_ARGS 1 482#define PUSH_ROUNDING(N) m32c_push_rounding (N) 483#define CALL_POPS_ARGS(C) 0 484 485/* Passing Arguments in Registers */ 486 487typedef struct m32c_cumulative_args 488{ 489 /* For address of return value buffer (structures are returned by 490 passing the address of a buffer as an invisible first argument. 491 This identifies it). If set, the current parameter will be put 492 on the stack, regardless of type. */ 493 int force_mem; 494 /* First parm is 1, parm 0 is hidden pointer for returning 495 aggregates. */ 496 int parm_num; 497} m32c_cumulative_args; 498 499#define CUMULATIVE_ARGS m32c_cumulative_args 500#define INIT_CUMULATIVE_ARGS(CA,FNTYPE,LIBNAME,FNDECL,N_NAMED_ARGS) \ 501 m32c_init_cumulative_args (&(CA),FNTYPE,LIBNAME,FNDECL,N_NAMED_ARGS) 502#define FUNCTION_ARG_REGNO_P(r) m32c_function_arg_regno_p (r) 503 504/* How Large Values Are Returned */ 505 506#define DEFAULT_PCC_STRUCT_RETURN 1 507 508/* Function Entry and Exit */ 509 510#define EXIT_IGNORE_STACK 0 511#define EPILOGUE_USES(REGNO) m32c_epilogue_uses(REGNO) 512#define EH_USES(REGNO) 0 /* FIXME */ 513 514/* Generating Code for Profiling */ 515 516#define FUNCTION_PROFILER(FILE,LABELNO) 517 518/* Implementing the Varargs Macros */ 519 520/* Trampolines for Nested Functions */ 521 522#define TRAMPOLINE_SIZE m32c_trampoline_size () 523#define TRAMPOLINE_ALIGNMENT m32c_trampoline_alignment () 524 525/* Addressing Modes */ 526 527#define HAVE_PRE_DECREMENT 1 528#define HAVE_POST_INCREMENT 1 529#define MAX_REGS_PER_ADDRESS 1 530 531/* This is passed to the macros below, so that they can be implemented 532 in m32c.c. */ 533#ifdef REG_OK_STRICT 534#define REG_OK_STRICT_V 1 535#else 536#define REG_OK_STRICT_V 0 537#endif 538 539#define REG_OK_FOR_BASE_P(X) m32c_reg_ok_for_base_p (X, REG_OK_STRICT_V) 540#define REG_OK_FOR_INDEX_P(X) 0 541 542/* #define FIND_BASE_TERM(X) when we do unspecs for symrefs */ 543 544#define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \ 545 if (m32c_legitimize_reload_address(&(X),MODE,OPNUM,TYPE,IND_LEVELS)) \ 546 goto WIN; 547 548/* Address spaces. */ 549#define ADDR_SPACE_FAR 1 550 551 552/* Condition Code Status */ 553 554#define REVERSIBLE_CC_MODE(MODE) 1 555 556/* Dividing the Output into Sections (Texts, Data, ...) */ 557 558#define TEXT_SECTION_ASM_OP ".text" 559#define DATA_SECTION_ASM_OP ".data" 560#define BSS_SECTION_ASM_OP ".bss" 561 562#define CTOR_LIST_BEGIN 563#define CTOR_LIST_END 564#define DTOR_LIST_BEGIN 565#define DTOR_LIST_END 566#define CTORS_SECTION_ASM_OP "\t.section\t.init_array,\"aw\",%init_array" 567#define DTORS_SECTION_ASM_OP "\t.section\t.fini_array,\"aw\",%fini_array" 568#define INIT_ARRAY_SECTION_ASM_OP "\t.section\t.init_array,\"aw\",%init_array" 569#define FINI_ARRAY_SECTION_ASM_OP "\t.section\t.fini_array,\"aw\",%fini_array" 570 571/* The Overall Framework of an Assembler File */ 572 573#define ASM_COMMENT_START ";" 574#define ASM_APP_ON "" 575#define ASM_APP_OFF "" 576 577/* Output and Generation of Labels */ 578 579#define GLOBAL_ASM_OP "\t.global\t" 580 581/* Output of Assembler Instructions */ 582 583#define REGISTER_NAMES { \ 584 "r0", "r2", "r1", "r3", \ 585 "a0", "a1", "sb", "fb", "sp", \ 586 "pc", "flg", "argp", \ 587 "mem0", "mem2", "mem4", "mem6", "mem8", "mem10", "mem12", "mem14", \ 588} 589 590#define ADDITIONAL_REGISTER_NAMES { \ 591 {"r0l", 0}, \ 592 {"r1l", 2}, \ 593 {"r0r2", 0}, \ 594 {"r1r3", 2}, \ 595 {"a0a1", 4}, \ 596 {"r0r2r1r3", 0} } 597 598#undef USER_LABEL_PREFIX 599#define USER_LABEL_PREFIX "_" 600 601#define ASM_OUTPUT_REG_PUSH(S,R) m32c_output_reg_push (S, R) 602#define ASM_OUTPUT_REG_POP(S,R) m32c_output_reg_pop (S, R) 603 604#define ASM_OUTPUT_ALIGNED_DECL_COMMON(STREAM, DECL, NAME, SIZE, ALIGNMENT) \ 605 m32c_output_aligned_common (STREAM, DECL, NAME, SIZE, ALIGNMENT, 1) 606 607#define ASM_OUTPUT_ALIGNED_DECL_LOCAL(STREAM, DECL, NAME, SIZE, ALIGNMENT) \ 608 m32c_output_aligned_common (STREAM, DECL, NAME, SIZE, ALIGNMENT, 0) 609 610 611/* Output of Dispatch Tables */ 612 613#define ASM_OUTPUT_ADDR_VEC_ELT(S,V) \ 614 fprintf (S, "\t.word L%d\n", V) 615 616/* Assembler Commands for Exception Regions */ 617 618#define DWARF_CIE_DATA_ALIGNMENT -1 619 620/* Assembler Commands for Alignment */ 621 622#define ASM_OUTPUT_ALIGN(STREAM,POWER) \ 623 fprintf (STREAM, "\t.p2align\t%d\n", POWER); 624 625/* Controlling Debugging Information Format */ 626 627#define DWARF2_ADDR_SIZE 4 628 629/* Miscellaneous Parameters */ 630 631#define HAS_LONG_COND_BRANCH false 632#define HAS_LONG_UNCOND_BRANCH true 633#define CASE_VECTOR_MODE SImode 634#define LOAD_EXTEND_OP(MEM) ZERO_EXTEND 635 636#define MOVE_MAX 4 637#define TRULY_NOOP_TRUNCATION(op,ip) 1 638 639#define STORE_FLAG_VALUE 1 640 641/* 16- or 24-bit pointers */ 642#define Pmode (TARGET_A16 ? HImode : PSImode) 643#define FUNCTION_MODE QImode 644 645#define REGISTER_TARGET_PRAGMAS() m32c_register_pragmas() 646 647#endif 648