1
2/*
3 * Copyright (c) 2010-2011 Adrian Chadd, Xenion Pty Ltd.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 */
26
27#include <sys/types.h>
28
29#include <err.h>
30#include <stdio.h>
31#include <stdlib.h>
32#include <string.h>
33#include <unistd.h>
34
35typedef enum {
36        AH_FALSE = 0,           /* NB: lots of code assumes false is zero */
37        AH_TRUE  = 1,
38} HAL_BOOL;
39
40typedef enum {
41        HAL_OK          = 0,    /* No error */
42} HAL_STATUS;
43
44struct ath_hal;
45
46#include "ah_eeprom_v4k.h"
47
48void
49eeprom_v4k_base_print(uint16_t *buf)
50{
51	HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf;
52	BASE_EEP4K_HEADER *eh = &eep->ee_base.baseEepHeader;
53
54	printf("| Version: 0x%.4x   | Length: 0x%.4x | Checksum: 0x%.4x ",
55	    eh->version, eh->length, eh->checksum);
56	printf("| CapFlags: 0x%.2x  | eepMisc: 0x%.2x | RegDomain: 0x%.4x 0x%.4x | \n",
57	    eh->opCapFlags, eh->eepMisc, eh->regDmn[0], eh->regDmn[1]);
58	printf("| MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x ",
59	    eh->macAddr[0], eh->macAddr[1], eh->macAddr[2],
60	    eh->macAddr[3], eh->macAddr[4], eh->macAddr[5]);
61	printf("| RxMask: 0x%.2x | TxMask: 0x%.2x | RfSilent: 0x%.4x | btOptions: 0x%.4x |\n",
62	    eh->rxMask, eh->txMask, eh->rfSilent, eh->blueToothOptions);
63	printf("| DeviceCap: 0x%.4x | binBuildNumber: %.8x | deviceType: 0x%.2x | txGainType 0x%.2x |\n",
64	    eh->deviceCap, eh->binBuildNumber, eh->deviceType, eh->txGainType);
65}
66
67void
68eeprom_v4k_custdata_print(uint16_t *buf)
69{
70	HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf;
71	uint8_t *custdata = (uint8_t *) &eep->ee_base.custData;
72	int i;
73
74	printf("\n| Custdata:                                       |\n");
75	for (i = 0; i < 20; i++) {
76		printf("%s0x%.2x %s",
77		    i % 16 == 0 ? "| " : "",
78		    custdata[i],
79		    i % 16 == 15 ? "|\n" : "");
80	}
81	printf("\n");
82}
83
84void
85eeprom_v4k_modal_print(uint16_t *buf)
86{
87	HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf;
88	MODAL_EEP4K_HEADER *mh = &eep->ee_base.modalHeader;
89	int i;
90
91	printf("| antCtrlCommon: 0x%.8x |\n", mh->antCtrlCommon);
92	printf("| switchSettling: 0x%.2x |\n", mh->switchSettling);
93	printf("| adcDesiredSize: %d |\n| pgaDesiredSize: %.2f dBm |\n",
94	    mh->adcDesiredSize, (float) mh->pgaDesiredSize / 2.0);
95
96	printf("| antCtrlChain:        0:0x%.4x |\n", mh->antCtrlChain[0]);
97	printf("| antennaGainCh:       0:0x%.2x |\n", mh->antennaGainCh[0]);
98	printf("| txRxAttenCh:         0:0x%.2x |\n", mh->txRxAttenCh[0]);
99	printf("| rxTxMarginCh:        0:0x%.2x |\n", mh->rxTxMarginCh[0]);
100 	printf("| noiseFloorThresCh:   0:0x%.2x |\n", mh->noiseFloorThreshCh[0]);
101	printf("| xlnaGainCh:          0:0x%.2x |\n", mh->xlnaGainCh[0]);
102	printf("| iqCalICh:            0:0x%.2x |\n", mh->iqCalICh[0]);
103	printf("| iqCalQCh:            0:0x%.2x |\n", mh->iqCalQCh[0]);
104	printf("| bswAtten:            0:0x%.2x |\n", mh->bswAtten[0]);
105	printf("| bswMargin:           0:0x%.2x |\n", mh->bswMargin[0]);
106	printf("| xatten2Db:           0:0x%.2x |\n", mh->xatten2Db[0]);
107	printf("| xatten2Margin:       0:0x%.2x |\n", mh->xatten2Margin[0]);
108
109	printf("| txEndToXpaOff: 0x%.2x | txEndToRxOn: 0x%.2x | txFrameToXpaOn: 0x%.2x |\n",
110	    mh->txEndToXpaOff, mh->txEndToRxOn, mh->txFrameToXpaOn);
111	printf("| thres62: 0x%.2x\n", mh->thresh62);
112	printf("| xpdGain: 0x%.2x | xpd: 0x%.2x |\n", mh->xpdGain, mh->xpd);
113
114	printf("| pdGainOverlap: 0x%.2x xpaBiasLvl: 0x%.2x |\n", mh->pdGainOverlap, mh->xpaBiasLvl);
115	printf("| txFrameToDataStart: 0x%.2x | txFrameToPaOn: 0x%.2x |\n", mh->txFrameToDataStart, mh->txFrameToPaOn);
116	printf("| ht40PowerIncForPdadc: 0x%.2x |\n", mh->ht40PowerIncForPdadc);
117	printf("| swSettleHt40: 0x%.2x |\n", mh->swSettleHt40);
118
119	printf("| ob_0: 0x%.2x | ob_1: 0x%.2x | ob_2: 0x%.2x | ob_3: 0x%.2x |\n",
120	    mh->ob_0, mh->ob_1, mh->ob_2, mh->ob_3);
121	printf("| db_1_0: 0x%.2x | db_1_1: 0x%.2x | db_1_2: 0x%.2x | db_1_3: 0x%.2x db_1_4: 0x%.2x|\n",
122	    mh->db1_0, mh->db1_1, mh->db1_2, mh->db1_3, mh->db1_4);
123	printf("| db_1_0: 0x%.2x | db_1_1: 0x%.2x | db_1_2: 0x%.2x | db_1_3: 0x%.2x db_1_4: 0x%.2x|\n",
124	    mh->db2_0, mh->db2_1, mh->db2_2, mh->db2_3, mh->db2_4);
125
126	printf("| antdiv_ctl1: 0x%.2x antdiv_ctl2: 0x%.2x |\n", mh->antdiv_ctl1, mh->antdiv_ctl2);
127
128	printf("| Modal Version: %.2x |\n", mh->version);
129
130	printf("| tx_diversity: 0x%.2x |\n", mh->tx_diversity);
131	printf("| flc_pwr_thresh: 0x%.2x |\n", mh->flc_pwr_thresh);
132	printf("| bb_scale_smrt_antenna: 0x%.2x |\n", mh->bb_scale_smrt_antenna);
133	printf("| futureModal: 0x%.2x |\n", mh->futureModal[0]);
134
135	/* and now, spur channels */
136	for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
137		printf("| Spur %d: spurChan: 0x%.4x spurRangeLow: 0x%.2x spurRangeHigh: 0x%.2x |\n",
138		    i, mh->spurChans[i].spurChan,
139		    (int) mh->spurChans[i].spurRangeLow,
140		    (int) mh->spurChans[i].spurRangeHigh);
141	}
142}
143
144static void
145eeprom_v4k_print_caldata_perfreq(CAL_DATA_PER_FREQ_4K *f)
146{
147	int i, j;
148
149	for (i = 0; i < AR5416_4K_NUM_PD_GAINS; i++) {
150		printf("    Gain %d: pwr dBm/vpd: ", i);
151		for (j = 0; j < AR5416_PD_GAIN_ICEPTS; j++) {
152			/* These are stored in 0.25dBm increments */
153			/* XXX is this assumption correct for ar9285? */
154			/* XXX shouldn't we care about the power table offset, if there is one? */
155			printf("%d:(%.2f/%d) ", j, (float) f->pwrPdg[i][j] / 4.00,
156			    f->vpdPdg[i][j]);
157		}
158		printf("\n");
159	}
160}
161
162void
163eeprom_v4k_calfreqpiers_print(uint16_t *buf)
164{
165	HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf;
166	int i, n;
167
168	/* 2ghz cal piers */
169	printf("calFreqPier2G: ");
170	for (i = 0; i < AR5416_4K_NUM_2G_CAL_PIERS; i++) {
171		printf(" 0x%.2x ", eep->ee_base.calFreqPier2G[i]);
172	}
173	printf("|\n");
174
175	for (i = 0; i < AR5416_4K_NUM_2G_CAL_PIERS; i++) {
176		if (eep->ee_base.calFreqPier2G[i] == 0xff)
177			continue;
178		printf("2Ghz Cal Pier %d\n", i);
179		for (n = 0; n < AR5416_4K_MAX_CHAINS; n++) {
180			printf("  Chain %d:\n", n);
181			eeprom_v4k_print_caldata_perfreq(&eep->ee_base.calPierData2G[n][i]);
182		}
183	}
184
185	printf("\n");
186}
187
188/* XXX these should just reference the v14 print routines */
189static void
190eeprom_v14_target_legacy_print(CAL_TARGET_POWER_LEG *l)
191{
192	int i;
193	if (l->bChannel == 0xff)
194		return;
195	printf("  bChannel: %d;", l->bChannel);
196	for (i = 0; i < 4; i++) {
197		printf(" %.2f", (float) l->tPow2x[i] / 2.0);
198	}
199	printf(" (dBm)\n");
200}
201
202static void
203eeprom_v14_target_ht_print(CAL_TARGET_POWER_HT *l)
204{
205	int i;
206	if (l->bChannel == 0xff)
207		return;
208	printf("  bChannel: %d;", l->bChannel);
209	for (i = 0; i < 8; i++) {
210		printf(" %.2f", (float) l->tPow2x[i] / 2.0);
211	}
212	printf(" (dBm)\n");
213}
214
215void
216eeprom_v4k_print_targets(uint16_t *buf)
217{
218	HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf;
219	int i;
220
221	/* 2ghz rates */
222	printf("2Ghz CCK:\n");
223	for (i = 0; i < AR5416_4K_NUM_2G_CCK_TARGET_POWERS; i++) {
224		eeprom_v14_target_legacy_print(&eep->ee_base.calTargetPowerCck[i]);
225	}
226	printf("2Ghz 11g:\n");
227	for (i = 0; i < AR5416_4K_NUM_2G_20_TARGET_POWERS; i++) {
228		eeprom_v14_target_legacy_print(&eep->ee_base.calTargetPower2G[i]);
229	}
230	printf("2Ghz HT20:\n");
231	for (i = 0; i < AR5416_4K_NUM_2G_20_TARGET_POWERS; i++) {
232		eeprom_v14_target_ht_print(&eep->ee_base.calTargetPower2GHT20[i]);
233	}
234	printf("2Ghz HT40:\n");
235	for (i = 0; i < AR5416_4K_NUM_2G_40_TARGET_POWERS; i++) {
236		eeprom_v14_target_ht_print(&eep->ee_base.calTargetPower2GHT40[i]);
237	}
238
239}
240
241static void
242eeprom_v4k_ctl_edge_print(CAL_CTL_DATA_4K *ctl)
243{
244	int i, j;
245	uint8_t pow, flag;
246
247	for (i = 0; i < AR5416_4K_MAX_CHAINS; i++) {
248		printf("  chain %d: ", i);
249		for (j = 0; j < AR5416_4K_NUM_BAND_EDGES; j++) {
250			pow = ctl->ctlEdges[i][j].tPowerFlag & 0x3f;
251			flag = (ctl->ctlEdges[i][j].tPowerFlag & 0xc0) >> 6;
252			printf(" %d:pow=%d,flag=%.2x", j, pow, flag);
253		}
254		printf("\n");
255	}
256}
257
258void
259eeprom_v4k_ctl_print(uint16_t *buf)
260{
261	HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf;
262	int i;
263
264	for (i = 0; i < AR5416_4K_NUM_CTLS; i++) {
265		if (eep->ee_base.ctlIndex[i] == 0)
266			continue;
267		printf("| ctlIndex: offset %d, value %d\n", i, eep->ee_base.ctlIndex[i]);
268		eeprom_v4k_ctl_edge_print(&eep->ee_base.ctlData[i]);
269	}
270}
271
272void
273eeprom_v4k_print_edges(uint16_t *buf)
274{
275	HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf;
276	int i;
277
278	printf("| eeNumCtls: %d\n", eep->ee_numCtls);
279	for (i = 0; i < NUM_EDGES*eep->ee_numCtls; i++) {
280		/* XXX is flag 8 or 32 bits? */
281		printf("|  edge %2d/%2d: rdEdge: %5d EdgePower: %.2f dBm Flag: 0x%.8x\n",
282			i / NUM_EDGES, i % NUM_EDGES,
283			eep->ee_rdEdgesPower[i].rdEdge,
284			(float) eep->ee_rdEdgesPower[i].twice_rdEdgePower / 2.0,
285			eep->ee_rdEdgesPower[i].flag);
286
287		if (i % NUM_EDGES == (NUM_EDGES -1))
288			printf("|\n");
289	}
290}
291
292void
293eeprom_v4k_print_other(uint16_t *buf)
294{
295	HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf;
296	printf("| ee_antennaGainMax: %.2x\n", eep->ee_antennaGainMax);
297}
298