1/*- 2 * Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca> 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 18 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 19 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 20 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 21 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23 * SUCH DAMAGE. 24 */ 25 26#include <sys/param.h> 27#include <sys/systm.h> 28#include <sys/bus.h> 29#include <sys/kernel.h> 30#include <sys/module.h> 31#include <machine/bus.h> 32 33#include <dev/uart/uart.h> 34#include <dev/uart/uart_bus.h> 35#include <dev/uart/uart_cpu_fdt.h> 36#include <dev/uart/uart_dev_ns8250.h> 37 38#include <dev/ofw/ofw_bus.h> 39#include <dev/ofw/ofw_bus_subr.h> 40 41#include <dev/clk/clk.h> 42#include <dev/hwreset/hwreset.h> 43 44#include "uart_if.h" 45 46struct snps_softc { 47 struct ns8250_softc ns8250; 48 49 clk_t baudclk; 50 clk_t apb_pclk; 51 hwreset_t reset; 52}; 53 54/* 55 * To use early printf on 64 bits Allwinner SoC, add to kernel config 56 * options SOCDEV_PA=0x0 57 * options EARLY_PRINTF=snps 58 * 59 * To use early printf on 32 bits Allwinner SoC, add to kernel config 60 * options SOCDEV_PA=0x01C00000 61 * options SOCDEV_VA=0x10000000 62 * options EARLY_PRINTF=snps 63 * 64 * remove the if 0 65*/ 66#if CHECK_EARLY_PRINTF(snps) 67static void 68uart_snps_early_putc(int c) 69{ 70 volatile uint32_t *stat; 71 volatile uint32_t *tx; 72 73#ifdef ALLWINNER_64 74 stat = (uint32_t *) (socdev_va + 0x1C2807C); 75 tx = (uint32_t *) (socdev_va + 0x1C28000); 76#endif 77#ifdef ALLWINNER_32 78 stat = (uint32_t *) (socdev_va + 0x2807C); 79 tx = (uint32_t *) (socdev_va + 0x28000); 80#endif 81 82 while ((*stat & (1 << 2)) == 0) 83 continue; 84 *tx = c; 85} 86early_putc_t *early_putc = uart_snps_early_putc; 87#endif /* CHECK_EARLY_PRINTF */ 88 89static kobj_method_t snps_methods[] = { 90 KOBJMETHOD(uart_probe, ns8250_bus_probe), 91 KOBJMETHOD(uart_attach, ns8250_bus_attach), 92 KOBJMETHOD(uart_detach, ns8250_bus_detach), 93 KOBJMETHOD(uart_flush, ns8250_bus_flush), 94 KOBJMETHOD(uart_getsig, ns8250_bus_getsig), 95 KOBJMETHOD(uart_ioctl, ns8250_bus_ioctl), 96 KOBJMETHOD(uart_ipend, ns8250_bus_ipend), 97 KOBJMETHOD(uart_param, ns8250_bus_param), 98 KOBJMETHOD(uart_receive, ns8250_bus_receive), 99 KOBJMETHOD(uart_setsig, ns8250_bus_setsig), 100 KOBJMETHOD(uart_transmit, ns8250_bus_transmit), 101 KOBJMETHOD(uart_txbusy, ns8250_bus_txbusy), 102 KOBJMETHOD(uart_grab, ns8250_bus_grab), 103 KOBJMETHOD(uart_ungrab, ns8250_bus_ungrab), 104 KOBJMETHOD_END 105}; 106 107struct uart_class uart_snps_class = { 108 "snps", 109 snps_methods, 110 sizeof(struct snps_softc), 111 .uc_ops = &uart_ns8250_ops, 112 .uc_range = 8, 113 .uc_rclk = 0, 114}; 115 116static struct ofw_compat_data compat_data[] = { 117 { "snps,dw-apb-uart", (uintptr_t)&uart_snps_class }, 118 { "marvell,armada-38x-uart", (uintptr_t)&uart_snps_class }, 119 { NULL, (uintptr_t)NULL } 120}; 121UART_FDT_CLASS(compat_data); 122 123static int 124snps_get_clocks(device_t dev, clk_t *baudclk, clk_t *apb_pclk) 125{ 126 127 *baudclk = NULL; 128 *apb_pclk = NULL; 129 130 /* Baud clock is either named "baudclk", or there is a single 131 * unnamed clock. 132 */ 133 if (clk_get_by_ofw_name(dev, 0, "baudclk", baudclk) != 0 && 134 clk_get_by_ofw_index(dev, 0, 0, baudclk) != 0) 135 return (ENOENT); 136 137 /* APB peripheral clock is optional */ 138 (void)clk_get_by_ofw_name(dev, 0, "apb_pclk", apb_pclk); 139 140 return (0); 141} 142 143static int 144snps_probe(device_t dev) 145{ 146 struct snps_softc *sc; 147 struct uart_class *uart_class; 148 phandle_t node; 149 uint32_t shift, iowidth, clock; 150 uint64_t freq; 151 int error; 152 clk_t baudclk, apb_pclk; 153 hwreset_t reset; 154 155 if (!ofw_bus_status_okay(dev)) 156 return (ENXIO); 157 158 uart_class = (struct uart_class *)ofw_bus_search_compatible(dev, 159 compat_data)->ocd_data; 160 if (uart_class == NULL) 161 return (ENXIO); 162 163 freq = 0; 164 sc = device_get_softc(dev); 165 sc->ns8250.base.sc_class = uart_class; 166 167 node = ofw_bus_get_node(dev); 168 if (OF_getencprop(node, "reg-shift", &shift, sizeof(shift)) <= 0) 169 shift = 0; 170 if (OF_getencprop(node, "reg-io-width", &iowidth, sizeof(iowidth)) <= 0) 171 iowidth = 1; 172 if (OF_getencprop(node, "clock-frequency", &clock, sizeof(clock)) <= 0) 173 clock = 0; 174 175 if (hwreset_get_by_ofw_idx(dev, 0, 0, &reset) == 0) { 176 error = hwreset_deassert(reset); 177 if (error != 0) { 178 device_printf(dev, "cannot de-assert reset\n"); 179 return (error); 180 } 181 } 182 183 if (snps_get_clocks(dev, &baudclk, &apb_pclk) == 0) { 184 error = clk_enable(baudclk); 185 if (error != 0) { 186 device_printf(dev, "cannot enable baud clock\n"); 187 return (error); 188 } 189 if (apb_pclk != NULL) { 190 error = clk_enable(apb_pclk); 191 if (error != 0) { 192 device_printf(dev, 193 "cannot enable peripheral clock\n"); 194 return (error); 195 } 196 } 197 198 if (clock == 0) { 199 error = clk_get_freq(baudclk, &freq); 200 if (error != 0) { 201 device_printf(dev, "cannot get frequency\n"); 202 return (error); 203 } 204 clock = (uint32_t)freq; 205 } 206 } 207 208 if (bootverbose && clock == 0) 209 device_printf(dev, "could not determine frequency\n"); 210 211 error = uart_bus_probe(dev, (int)shift, (int)iowidth, (int)clock, 0, 0, UART_F_BUSY_DETECT); 212 if (error > 0) 213 return (error); 214 215 /* XXX uart_bus_probe has changed the softc, so refresh it */ 216 sc = device_get_softc(dev); 217 218 /* Store clock and reset handles for detach */ 219 sc->baudclk = baudclk; 220 sc->apb_pclk = apb_pclk; 221 sc->reset = reset; 222 223 return (BUS_PROBE_VENDOR); 224} 225 226static int 227snps_attach(device_t dev) 228{ 229 phandle_t node; 230 int ret; 231 232 ret = uart_bus_attach(dev); 233 if (ret == 0) { 234 node = ofw_bus_get_node(dev); 235 /* Set up phandle to dev mapping */ 236 OF_device_register_xref(OF_xref_from_node(node), dev); 237 } 238 239 return (ret); 240} 241 242static int 243snps_detach(device_t dev) 244{ 245 struct snps_softc *sc; 246 clk_t baudclk, apb_pclk; 247 hwreset_t reset; 248 int error; 249 250 sc = device_get_softc(dev); 251 baudclk = sc->baudclk; 252 apb_pclk = sc->apb_pclk; 253 reset = sc->reset; 254 255 error = uart_bus_detach(dev); 256 if (error != 0) 257 return (error); 258 259 if (reset != NULL) { 260 error = hwreset_assert(reset); 261 if (error != 0) { 262 device_printf(dev, "cannot assert reset\n"); 263 return (error); 264 } 265 hwreset_release(reset); 266 } 267 if (apb_pclk != NULL) { 268 error = clk_release(apb_pclk); 269 if (error != 0) { 270 device_printf(dev, "cannot release peripheral clock\n"); 271 return (error); 272 } 273 } 274 if (baudclk != NULL) { 275 error = clk_release(baudclk); 276 if (error != 0) { 277 device_printf(dev, "cannot release baud clock\n"); 278 return (error); 279 } 280 } 281 282 return (0); 283} 284 285static device_method_t snps_bus_methods[] = { 286 /* Device interface */ 287 DEVMETHOD(device_probe, snps_probe), 288 DEVMETHOD(device_attach, snps_attach), 289 DEVMETHOD(device_detach, snps_detach), 290 DEVMETHOD_END 291}; 292 293static driver_t snps_uart_driver = { 294 uart_driver_name, 295 snps_bus_methods, 296 sizeof(struct snps_softc) 297}; 298 299DRIVER_MODULE(uart_snps, simplebus, snps_uart_driver, 0, 0); 300