1/*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29#include <sys/param.h> 30#include <sys/module.h> 31#include <sys/systm.h> 32#include <sys/kernel.h> 33#include <sys/ata.h> 34#include <sys/bus.h> 35#include <sys/conf.h> 36#include <sys/endian.h> 37#include <sys/malloc.h> 38#include <sys/lock.h> 39#include <sys/mutex.h> 40#include <vm/uma.h> 41#include <machine/stdarg.h> 42#include <machine/resource.h> 43#include <machine/bus.h> 44#include <sys/rman.h> 45#include <dev/pci/pcivar.h> 46#include "mvs.h" 47 48#include <cam/cam.h> 49#include <cam/cam_ccb.h> 50#include <cam/cam_sim.h> 51#include <cam/cam_xpt_sim.h> 52#include <cam/cam_debug.h> 53 54/* local prototypes */ 55static int mvs_ch_init(device_t dev); 56static int mvs_ch_deinit(device_t dev); 57static int mvs_ch_suspend(device_t dev); 58static int mvs_ch_resume(device_t dev); 59static void mvs_dmainit(device_t dev); 60static void mvs_dmasetupc_cb(void *xsc, 61 bus_dma_segment_t *segs, int nsegs, int error); 62static void mvs_dmafini(device_t dev); 63static void mvs_slotsalloc(device_t dev); 64static void mvs_slotsfree(device_t dev); 65static void mvs_setup_edma_queues(device_t dev); 66static void mvs_set_edma_mode(device_t dev, enum mvs_edma_mode mode); 67static void mvs_ch_pm(void *arg); 68static void mvs_ch_intr_locked(void *data); 69static void mvs_ch_intr(void *data); 70static void mvs_reset(device_t dev); 71static void mvs_softreset(device_t dev, union ccb *ccb); 72 73static int mvs_sata_connect(struct mvs_channel *ch); 74static int mvs_sata_phy_reset(device_t dev); 75static int mvs_wait(device_t dev, u_int s, u_int c, int t); 76static void mvs_tfd_read(device_t dev, union ccb *ccb); 77static void mvs_tfd_write(device_t dev, union ccb *ccb); 78static void mvs_legacy_intr(device_t dev, int poll); 79static void mvs_crbq_intr(device_t dev); 80static void mvs_begin_transaction(device_t dev, union ccb *ccb); 81static void mvs_legacy_execute_transaction(struct mvs_slot *slot); 82static void mvs_timeout(void *arg); 83static void mvs_dmasetprd(void *arg, 84 bus_dma_segment_t *segs, int nsegs, int error); 85static void mvs_requeue_frozen(device_t dev); 86static void mvs_execute_transaction(struct mvs_slot *slot); 87static void mvs_end_transaction(struct mvs_slot *slot, enum mvs_err_type et); 88 89static void mvs_issue_recovery(device_t dev); 90static void mvs_process_read_log(device_t dev, union ccb *ccb); 91static void mvs_process_request_sense(device_t dev, union ccb *ccb); 92 93static void mvsaction(struct cam_sim *sim, union ccb *ccb); 94static void mvspoll(struct cam_sim *sim); 95 96static MALLOC_DEFINE(M_MVS, "MVS driver", "MVS driver data buffers"); 97 98#define recovery_type spriv_field0 99#define RECOVERY_NONE 0 100#define RECOVERY_READ_LOG 1 101#define RECOVERY_REQUEST_SENSE 2 102#define recovery_slot spriv_field1 103 104static int 105mvs_ch_probe(device_t dev) 106{ 107 108 device_set_desc_copy(dev, "Marvell SATA channel"); 109 return (BUS_PROBE_DEFAULT); 110} 111 112static int 113mvs_ch_attach(device_t dev) 114{ 115 struct mvs_controller *ctlr = device_get_softc(device_get_parent(dev)); 116 struct mvs_channel *ch = device_get_softc(dev); 117 struct cam_devq *devq; 118 int rid, error, i, sata_rev = 0; 119 120 ch->dev = dev; 121 ch->unit = (intptr_t)device_get_ivars(dev); 122 ch->quirks = ctlr->quirks; 123 mtx_init(&ch->mtx, "MVS channel lock", NULL, MTX_DEF); 124 ch->pm_level = 0; 125 resource_int_value(device_get_name(dev), 126 device_get_unit(dev), "pm_level", &ch->pm_level); 127 if (ch->pm_level > 3) 128 callout_init_mtx(&ch->pm_timer, &ch->mtx, 0); 129 callout_init_mtx(&ch->reset_timer, &ch->mtx, 0); 130 resource_int_value(device_get_name(dev), 131 device_get_unit(dev), "sata_rev", &sata_rev); 132 for (i = 0; i < 16; i++) { 133 ch->user[i].revision = sata_rev; 134 ch->user[i].mode = 0; 135 ch->user[i].bytecount = (ch->quirks & MVS_Q_GENIIE) ? 8192 : 2048; 136 ch->user[i].tags = MVS_MAX_SLOTS; 137 ch->curr[i] = ch->user[i]; 138 if (ch->pm_level) { 139 ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ | 140 CTS_SATA_CAPS_H_APST | 141 CTS_SATA_CAPS_D_PMREQ | CTS_SATA_CAPS_D_APST; 142 } 143 ch->user[i].caps |= CTS_SATA_CAPS_H_AN; 144 } 145 rid = ch->unit; 146 if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 147 &rid, RF_ACTIVE))) 148 return (ENXIO); 149 mvs_dmainit(dev); 150 mvs_slotsalloc(dev); 151 mvs_ch_init(dev); 152 mtx_lock(&ch->mtx); 153 rid = ATA_IRQ_RID; 154 if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 155 &rid, RF_SHAREABLE | RF_ACTIVE))) { 156 device_printf(dev, "Unable to map interrupt\n"); 157 error = ENXIO; 158 goto err0; 159 } 160 if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL, 161 mvs_ch_intr_locked, dev, &ch->ih))) { 162 device_printf(dev, "Unable to setup interrupt\n"); 163 error = ENXIO; 164 goto err1; 165 } 166 /* Create the device queue for our SIM. */ 167 devq = cam_simq_alloc(MVS_MAX_SLOTS - 1); 168 if (devq == NULL) { 169 device_printf(dev, "Unable to allocate simq\n"); 170 error = ENOMEM; 171 goto err1; 172 } 173 /* Construct SIM entry */ 174 ch->sim = cam_sim_alloc(mvsaction, mvspoll, "mvsch", ch, 175 device_get_unit(dev), &ch->mtx, 176 2, (ch->quirks & MVS_Q_GENI) ? 0 : MVS_MAX_SLOTS - 1, 177 devq); 178 if (ch->sim == NULL) { 179 cam_simq_free(devq); 180 device_printf(dev, "unable to allocate sim\n"); 181 error = ENOMEM; 182 goto err1; 183 } 184 if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) { 185 device_printf(dev, "unable to register xpt bus\n"); 186 error = ENXIO; 187 goto err2; 188 } 189 if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim), 190 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 191 device_printf(dev, "unable to create path\n"); 192 error = ENXIO; 193 goto err3; 194 } 195 if (ch->pm_level > 3) { 196 callout_reset(&ch->pm_timer, 197 (ch->pm_level == 4) ? hz / 1000 : hz / 8, 198 mvs_ch_pm, dev); 199 } 200 mtx_unlock(&ch->mtx); 201 return (0); 202 203err3: 204 xpt_bus_deregister(cam_sim_path(ch->sim)); 205err2: 206 cam_sim_free(ch->sim, /*free_devq*/TRUE); 207err1: 208 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 209err0: 210 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 211 mtx_unlock(&ch->mtx); 212 mtx_destroy(&ch->mtx); 213 return (error); 214} 215 216static int 217mvs_ch_detach(device_t dev) 218{ 219 struct mvs_channel *ch = device_get_softc(dev); 220 221 mtx_lock(&ch->mtx); 222 xpt_async(AC_LOST_DEVICE, ch->path, NULL); 223 /* Forget about reset. */ 224 if (ch->resetting) { 225 ch->resetting = 0; 226 xpt_release_simq(ch->sim, TRUE); 227 } 228 xpt_free_path(ch->path); 229 xpt_bus_deregister(cam_sim_path(ch->sim)); 230 cam_sim_free(ch->sim, /*free_devq*/TRUE); 231 mtx_unlock(&ch->mtx); 232 233 if (ch->pm_level > 3) 234 callout_drain(&ch->pm_timer); 235 callout_drain(&ch->reset_timer); 236 bus_teardown_intr(dev, ch->r_irq, ch->ih); 237 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 238 239 mvs_ch_deinit(dev); 240 mvs_slotsfree(dev); 241 mvs_dmafini(dev); 242 243 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 244 mtx_destroy(&ch->mtx); 245 return (0); 246} 247 248static int 249mvs_ch_init(device_t dev) 250{ 251 struct mvs_channel *ch = device_get_softc(dev); 252 uint32_t reg; 253 254 /* Disable port interrupts */ 255 ATA_OUTL(ch->r_mem, EDMA_IEM, 0); 256 /* Stop EDMA */ 257 ch->curr_mode = MVS_EDMA_UNKNOWN; 258 mvs_set_edma_mode(dev, MVS_EDMA_OFF); 259 /* Clear and configure FIS interrupts. */ 260 ATA_OUTL(ch->r_mem, SATA_FISIC, 0); 261 reg = ATA_INL(ch->r_mem, SATA_FISC); 262 reg |= SATA_FISC_FISWAIT4HOSTRDYEN_B1; 263 ATA_OUTL(ch->r_mem, SATA_FISC, reg); 264 reg = ATA_INL(ch->r_mem, SATA_FISIM); 265 reg |= SATA_FISC_FISWAIT4HOSTRDYEN_B1; 266 ATA_OUTL(ch->r_mem, SATA_FISC, reg); 267 /* Clear SATA error register. */ 268 ATA_OUTL(ch->r_mem, SATA_SE, 0xffffffff); 269 /* Clear any outstanding error interrupts. */ 270 ATA_OUTL(ch->r_mem, EDMA_IEC, 0); 271 /* Unmask all error interrupts */ 272 ATA_OUTL(ch->r_mem, EDMA_IEM, ~EDMA_IE_TRANSIENT); 273 return (0); 274} 275 276static int 277mvs_ch_deinit(device_t dev) 278{ 279 struct mvs_channel *ch = device_get_softc(dev); 280 281 /* Stop EDMA */ 282 mvs_set_edma_mode(dev, MVS_EDMA_OFF); 283 /* Disable port interrupts. */ 284 ATA_OUTL(ch->r_mem, EDMA_IEM, 0); 285 return (0); 286} 287 288static int 289mvs_ch_suspend(device_t dev) 290{ 291 struct mvs_channel *ch = device_get_softc(dev); 292 293 mtx_lock(&ch->mtx); 294 xpt_freeze_simq(ch->sim, 1); 295 while (ch->oslots) 296 msleep(ch, &ch->mtx, PRIBIO, "mvssusp", hz/100); 297 /* Forget about reset. */ 298 if (ch->resetting) { 299 ch->resetting = 0; 300 callout_stop(&ch->reset_timer); 301 xpt_release_simq(ch->sim, TRUE); 302 } 303 mvs_ch_deinit(dev); 304 mtx_unlock(&ch->mtx); 305 return (0); 306} 307 308static int 309mvs_ch_resume(device_t dev) 310{ 311 struct mvs_channel *ch = device_get_softc(dev); 312 313 mtx_lock(&ch->mtx); 314 mvs_ch_init(dev); 315 mvs_reset(dev); 316 xpt_release_simq(ch->sim, TRUE); 317 mtx_unlock(&ch->mtx); 318 return (0); 319} 320 321struct mvs_dc_cb_args { 322 bus_addr_t maddr; 323 int error; 324}; 325 326static void 327mvs_dmainit(device_t dev) 328{ 329 struct mvs_channel *ch = device_get_softc(dev); 330 struct mvs_dc_cb_args dcba; 331 332 /* EDMA command request area. */ 333 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0, 334 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 335 NULL, NULL, MVS_WORKRQ_SIZE, 1, MVS_WORKRQ_SIZE, 336 0, NULL, NULL, &ch->dma.workrq_tag)) 337 goto error; 338 if (bus_dmamem_alloc(ch->dma.workrq_tag, (void **)&ch->dma.workrq, 0, 339 &ch->dma.workrq_map)) 340 goto error; 341 if (bus_dmamap_load(ch->dma.workrq_tag, ch->dma.workrq_map, 342 ch->dma.workrq, MVS_WORKRQ_SIZE, mvs_dmasetupc_cb, &dcba, 0) || 343 dcba.error) { 344 bus_dmamem_free(ch->dma.workrq_tag, 345 ch->dma.workrq, ch->dma.workrq_map); 346 goto error; 347 } 348 ch->dma.workrq_bus = dcba.maddr; 349 /* EDMA command response area. */ 350 if (bus_dma_tag_create(bus_get_dma_tag(dev), 256, 0, 351 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 352 NULL, NULL, MVS_WORKRP_SIZE, 1, MVS_WORKRP_SIZE, 353 0, NULL, NULL, &ch->dma.workrp_tag)) 354 goto error; 355 if (bus_dmamem_alloc(ch->dma.workrp_tag, (void **)&ch->dma.workrp, 0, 356 &ch->dma.workrp_map)) 357 goto error; 358 if (bus_dmamap_load(ch->dma.workrp_tag, ch->dma.workrp_map, 359 ch->dma.workrp, MVS_WORKRP_SIZE, mvs_dmasetupc_cb, &dcba, 0) || 360 dcba.error) { 361 bus_dmamem_free(ch->dma.workrp_tag, 362 ch->dma.workrp, ch->dma.workrp_map); 363 goto error; 364 } 365 ch->dma.workrp_bus = dcba.maddr; 366 /* Data area. */ 367 if (bus_dma_tag_create(bus_get_dma_tag(dev), 2, MVS_EPRD_MAX, 368 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 369 NULL, NULL, 370 MVS_SG_ENTRIES * PAGE_SIZE, MVS_SG_ENTRIES, MVS_EPRD_MAX, 371 0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag)) { 372 goto error; 373 } 374 return; 375 376error: 377 device_printf(dev, "WARNING - DMA initialization failed\n"); 378 mvs_dmafini(dev); 379} 380 381static void 382mvs_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error) 383{ 384 struct mvs_dc_cb_args *dcba = (struct mvs_dc_cb_args *)xsc; 385 386 if (!(dcba->error = error)) 387 dcba->maddr = segs[0].ds_addr; 388} 389 390static void 391mvs_dmafini(device_t dev) 392{ 393 struct mvs_channel *ch = device_get_softc(dev); 394 395 if (ch->dma.data_tag) { 396 bus_dma_tag_destroy(ch->dma.data_tag); 397 ch->dma.data_tag = NULL; 398 } 399 if (ch->dma.workrp_bus) { 400 bus_dmamap_unload(ch->dma.workrp_tag, ch->dma.workrp_map); 401 bus_dmamem_free(ch->dma.workrp_tag, 402 ch->dma.workrp, ch->dma.workrp_map); 403 ch->dma.workrp_bus = 0; 404 ch->dma.workrp = NULL; 405 } 406 if (ch->dma.workrp_tag) { 407 bus_dma_tag_destroy(ch->dma.workrp_tag); 408 ch->dma.workrp_tag = NULL; 409 } 410 if (ch->dma.workrq_bus) { 411 bus_dmamap_unload(ch->dma.workrq_tag, ch->dma.workrq_map); 412 bus_dmamem_free(ch->dma.workrq_tag, 413 ch->dma.workrq, ch->dma.workrq_map); 414 ch->dma.workrq_bus = 0; 415 ch->dma.workrq = NULL; 416 } 417 if (ch->dma.workrq_tag) { 418 bus_dma_tag_destroy(ch->dma.workrq_tag); 419 ch->dma.workrq_tag = NULL; 420 } 421} 422 423static void 424mvs_slotsalloc(device_t dev) 425{ 426 struct mvs_channel *ch = device_get_softc(dev); 427 int i; 428 429 /* Alloc and setup command/dma slots */ 430 bzero(ch->slot, sizeof(ch->slot)); 431 for (i = 0; i < MVS_MAX_SLOTS; i++) { 432 struct mvs_slot *slot = &ch->slot[i]; 433 434 slot->dev = dev; 435 slot->slot = i; 436 slot->state = MVS_SLOT_EMPTY; 437 slot->eprd_offset = MVS_EPRD_OFFSET + MVS_EPRD_SIZE * i; 438 slot->ccb = NULL; 439 callout_init_mtx(&slot->timeout, &ch->mtx, 0); 440 441 if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map)) 442 device_printf(ch->dev, "FAILURE - create data_map\n"); 443 } 444} 445 446static void 447mvs_slotsfree(device_t dev) 448{ 449 struct mvs_channel *ch = device_get_softc(dev); 450 int i; 451 452 /* Free all dma slots */ 453 for (i = 0; i < MVS_MAX_SLOTS; i++) { 454 struct mvs_slot *slot = &ch->slot[i]; 455 456 callout_drain(&slot->timeout); 457 if (slot->dma.data_map) { 458 bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map); 459 slot->dma.data_map = NULL; 460 } 461 } 462} 463 464static void 465mvs_setup_edma_queues(device_t dev) 466{ 467 struct mvs_channel *ch = device_get_softc(dev); 468 uint64_t work; 469 470 /* Requests queue. */ 471 work = ch->dma.workrq_bus; 472 ATA_OUTL(ch->r_mem, EDMA_REQQBAH, work >> 32); 473 ATA_OUTL(ch->r_mem, EDMA_REQQIP, work & 0xffffffff); 474 ATA_OUTL(ch->r_mem, EDMA_REQQOP, work & 0xffffffff); 475 bus_dmamap_sync(ch->dma.workrq_tag, ch->dma.workrq_map, 476 BUS_DMASYNC_PREWRITE); 477 /* Responses queue. */ 478 memset(ch->dma.workrp, 0xff, MVS_WORKRP_SIZE); 479 work = ch->dma.workrp_bus; 480 ATA_OUTL(ch->r_mem, EDMA_RESQBAH, work >> 32); 481 ATA_OUTL(ch->r_mem, EDMA_RESQIP, work & 0xffffffff); 482 ATA_OUTL(ch->r_mem, EDMA_RESQOP, work & 0xffffffff); 483 bus_dmamap_sync(ch->dma.workrp_tag, ch->dma.workrp_map, 484 BUS_DMASYNC_PREREAD); 485 ch->out_idx = 0; 486 ch->in_idx = 0; 487} 488 489static void 490mvs_set_edma_mode(device_t dev, enum mvs_edma_mode mode) 491{ 492 struct mvs_channel *ch = device_get_softc(dev); 493 int timeout; 494 uint32_t ecfg, fcfg, hc, ltm, unkn; 495 496 if (mode == ch->curr_mode) 497 return; 498 /* If we are running, we should stop first. */ 499 if (ch->curr_mode != MVS_EDMA_OFF) { 500 ATA_OUTL(ch->r_mem, EDMA_CMD, EDMA_CMD_EDSEDMA); 501 timeout = 0; 502 while (ATA_INL(ch->r_mem, EDMA_CMD) & EDMA_CMD_EENEDMA) { 503 DELAY(1000); 504 if (timeout++ > 1000) { 505 device_printf(dev, "stopping EDMA engine failed\n"); 506 break; 507 } 508 } 509 } 510 ch->curr_mode = mode; 511 ch->fbs_enabled = 0; 512 ch->fake_busy = 0; 513 /* Report mode to controller. Needed for correct CCC operation. */ 514 MVS_EDMA(device_get_parent(dev), dev, mode); 515 /* Configure new mode. */ 516 ecfg = EDMA_CFG_RESERVED | EDMA_CFG_RESERVED2 | EDMA_CFG_EHOSTQUEUECACHEEN; 517 if (ch->pm_present) { 518 ecfg |= EDMA_CFG_EMASKRXPM; 519 if (ch->quirks & MVS_Q_GENIIE) { 520 ecfg |= EDMA_CFG_EEDMAFBS; 521 ch->fbs_enabled = 1; 522 } 523 } 524 if (ch->quirks & MVS_Q_GENI) 525 ecfg |= EDMA_CFG_ERDBSZ; 526 else if (ch->quirks & MVS_Q_GENII) 527 ecfg |= EDMA_CFG_ERDBSZEXT | EDMA_CFG_EWRBUFFERLEN; 528 if (ch->quirks & MVS_Q_CT) 529 ecfg |= EDMA_CFG_ECUTTHROUGHEN; 530 if (mode != MVS_EDMA_OFF) 531 ecfg |= EDMA_CFG_EEARLYCOMPLETIONEN; 532 if (mode == MVS_EDMA_QUEUED) 533 ecfg |= EDMA_CFG_EQUE; 534 else if (mode == MVS_EDMA_NCQ) 535 ecfg |= EDMA_CFG_ESATANATVCMDQUE; 536 ATA_OUTL(ch->r_mem, EDMA_CFG, ecfg); 537 mvs_setup_edma_queues(dev); 538 if (ch->quirks & MVS_Q_GENIIE) { 539 /* Configure FBS-related registers */ 540 fcfg = ATA_INL(ch->r_mem, SATA_FISC); 541 ltm = ATA_INL(ch->r_mem, SATA_LTM); 542 hc = ATA_INL(ch->r_mem, EDMA_HC); 543 if (ch->fbs_enabled) { 544 fcfg |= SATA_FISC_FISDMAACTIVATESYNCRESP; 545 if (mode == MVS_EDMA_NCQ) { 546 fcfg &= ~SATA_FISC_FISWAIT4HOSTRDYEN_B0; 547 hc &= ~EDMA_IE_EDEVERR; 548 } else { 549 fcfg |= SATA_FISC_FISWAIT4HOSTRDYEN_B0; 550 hc |= EDMA_IE_EDEVERR; 551 } 552 ltm |= (1 << 8); 553 } else { 554 fcfg &= ~SATA_FISC_FISDMAACTIVATESYNCRESP; 555 fcfg &= ~SATA_FISC_FISWAIT4HOSTRDYEN_B0; 556 hc |= EDMA_IE_EDEVERR; 557 ltm &= ~(1 << 8); 558 } 559 ATA_OUTL(ch->r_mem, SATA_FISC, fcfg); 560 ATA_OUTL(ch->r_mem, SATA_LTM, ltm); 561 ATA_OUTL(ch->r_mem, EDMA_HC, hc); 562 /* This is some magic, required to handle several DRQs 563 * with basic DMA. */ 564 unkn = ATA_INL(ch->r_mem, EDMA_UNKN_RESD); 565 if (mode == MVS_EDMA_OFF) 566 unkn |= 1; 567 else 568 unkn &= ~1; 569 ATA_OUTL(ch->r_mem, EDMA_UNKN_RESD, unkn); 570 } 571 /* Run EDMA. */ 572 if (mode != MVS_EDMA_OFF) 573 ATA_OUTL(ch->r_mem, EDMA_CMD, EDMA_CMD_EENEDMA); 574} 575 576static device_method_t mvsch_methods[] = { 577 DEVMETHOD(device_probe, mvs_ch_probe), 578 DEVMETHOD(device_attach, mvs_ch_attach), 579 DEVMETHOD(device_detach, mvs_ch_detach), 580 DEVMETHOD(device_suspend, mvs_ch_suspend), 581 DEVMETHOD(device_resume, mvs_ch_resume), 582 { 0, 0 } 583}; 584static driver_t mvsch_driver = { 585 "mvsch", 586 mvsch_methods, 587 sizeof(struct mvs_channel) 588}; 589DRIVER_MODULE(mvsch, mvs, mvsch_driver, 0, 0); 590DRIVER_MODULE(mvsch, sata, mvsch_driver, 0, 0); 591 592static void 593mvs_phy_check_events(device_t dev, u_int32_t serr) 594{ 595 struct mvs_channel *ch = device_get_softc(dev); 596 597 if (ch->pm_level == 0) { 598 u_int32_t status = ATA_INL(ch->r_mem, SATA_SS); 599 union ccb *ccb; 600 601 if (bootverbose) { 602 if (((status & SATA_SS_DET_MASK) == SATA_SS_DET_PHY_ONLINE) && 603 ((status & SATA_SS_SPD_MASK) != SATA_SS_SPD_NO_SPEED) && 604 ((status & SATA_SS_IPM_MASK) == SATA_SS_IPM_ACTIVE)) { 605 device_printf(dev, "CONNECT requested\n"); 606 } else 607 device_printf(dev, "DISCONNECT requested\n"); 608 } 609 mvs_reset(dev); 610 if ((ccb = xpt_alloc_ccb_nowait()) == NULL) 611 return; 612 if (xpt_create_path(&ccb->ccb_h.path, NULL, 613 cam_sim_path(ch->sim), 614 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 615 xpt_free_ccb(ccb); 616 return; 617 } 618 xpt_rescan(ccb); 619 } 620} 621 622static void 623mvs_notify_events(device_t dev) 624{ 625 struct mvs_channel *ch = device_get_softc(dev); 626 struct cam_path *dpath; 627 uint32_t fis; 628 int d; 629 630 /* Try to read PMP field from SDB FIS. Present only for Gen-IIe. */ 631 fis = ATA_INL(ch->r_mem, SATA_FISDW0); 632 if ((fis & 0x80ff) == 0x80a1) 633 d = (fis & 0x0f00) >> 8; 634 else 635 d = ch->pm_present ? 15 : 0; 636 if (bootverbose) 637 device_printf(dev, "SNTF %d\n", d); 638 if (xpt_create_path(&dpath, NULL, 639 xpt_path_path_id(ch->path), d, 0) == CAM_REQ_CMP) { 640 xpt_async(AC_SCSI_AEN, dpath, NULL); 641 xpt_free_path(dpath); 642 } 643} 644 645static void 646mvs_ch_intr_locked(void *data) 647{ 648 struct mvs_intr_arg *arg = (struct mvs_intr_arg *)data; 649 device_t dev = (device_t)arg->arg; 650 struct mvs_channel *ch = device_get_softc(dev); 651 652 mtx_lock(&ch->mtx); 653 mvs_ch_intr(data); 654 mtx_unlock(&ch->mtx); 655} 656 657static void 658mvs_ch_pm(void *arg) 659{ 660 device_t dev = (device_t)arg; 661 struct mvs_channel *ch = device_get_softc(dev); 662 uint32_t work; 663 664 if (ch->numrslots != 0) 665 return; 666 /* If we are idle - request power state transition. */ 667 work = ATA_INL(ch->r_mem, SATA_SC); 668 work &= ~SATA_SC_SPM_MASK; 669 if (ch->pm_level == 4) 670 work |= SATA_SC_SPM_PARTIAL; 671 else 672 work |= SATA_SC_SPM_SLUMBER; 673 ATA_OUTL(ch->r_mem, SATA_SC, work); 674} 675 676static void 677mvs_ch_pm_wake(device_t dev) 678{ 679 struct mvs_channel *ch = device_get_softc(dev); 680 uint32_t work; 681 int timeout = 0; 682 683 work = ATA_INL(ch->r_mem, SATA_SS); 684 if (work & SATA_SS_IPM_ACTIVE) 685 return; 686 /* If we are not in active state - request power state transition. */ 687 work = ATA_INL(ch->r_mem, SATA_SC); 688 work &= ~SATA_SC_SPM_MASK; 689 work |= SATA_SC_SPM_ACTIVE; 690 ATA_OUTL(ch->r_mem, SATA_SC, work); 691 /* Wait for transition to happen. */ 692 while ((ATA_INL(ch->r_mem, SATA_SS) & SATA_SS_IPM_ACTIVE) == 0 && 693 timeout++ < 100) { 694 DELAY(100); 695 } 696} 697 698static void 699mvs_ch_intr(void *data) 700{ 701 struct mvs_intr_arg *arg = (struct mvs_intr_arg *)data; 702 device_t dev = (device_t)arg->arg; 703 struct mvs_channel *ch = device_get_softc(dev); 704 uint32_t iec, serr = 0, fisic = 0; 705 enum mvs_err_type et; 706 int i, ccs, port = -1, selfdis = 0; 707 int edma = (ch->numtslots != 0 || ch->numdslots != 0); 708 709 /* New item in response queue. */ 710 if ((arg->cause & 2) && edma) 711 mvs_crbq_intr(dev); 712 /* Some error or special event. */ 713 if (arg->cause & 1) { 714 iec = ATA_INL(ch->r_mem, EDMA_IEC); 715 if (iec & EDMA_IE_SERRINT) { 716 serr = ATA_INL(ch->r_mem, SATA_SE); 717 ATA_OUTL(ch->r_mem, SATA_SE, serr); 718 } 719 /* EDMA self-disabled due to error. */ 720 if (iec & EDMA_IE_ESELFDIS) 721 selfdis = 1; 722 /* Transport interrupt. */ 723 if (iec & EDMA_IE_ETRANSINT) { 724 /* For Gen-I this bit means self-disable. */ 725 if (ch->quirks & MVS_Q_GENI) 726 selfdis = 1; 727 /* For Gen-II this bit means SDB-N. */ 728 else if (ch->quirks & MVS_Q_GENII) 729 fisic = SATA_FISC_FISWAIT4HOSTRDYEN_B1; 730 else /* For Gen-IIe - read FIS interrupt cause. */ 731 fisic = ATA_INL(ch->r_mem, SATA_FISIC); 732 } 733 if (selfdis) 734 ch->curr_mode = MVS_EDMA_UNKNOWN; 735 ATA_OUTL(ch->r_mem, EDMA_IEC, ~iec); 736 /* Interface errors or Device error. */ 737 if (iec & (0xfc1e9000 | EDMA_IE_EDEVERR)) { 738 port = -1; 739 if (ch->numpslots != 0) { 740 ccs = 0; 741 } else { 742 if (ch->quirks & MVS_Q_GENIIE) 743 ccs = EDMA_S_EIOID(ATA_INL(ch->r_mem, EDMA_S)); 744 else 745 ccs = EDMA_S_EDEVQUETAG(ATA_INL(ch->r_mem, EDMA_S)); 746 /* Check if error is one-PMP-port-specific, */ 747 if (ch->fbs_enabled) { 748 /* Which ports were active. */ 749 for (i = 0; i < 16; i++) { 750 if (ch->numrslotspd[i] == 0) 751 continue; 752 if (port == -1) 753 port = i; 754 else if (port != i) { 755 port = -2; 756 break; 757 } 758 } 759 /* If several ports were active and EDMA still enabled - 760 * other ports are probably unaffected and may continue. 761 */ 762 if (port == -2 && !selfdis) { 763 uint16_t p = ATA_INL(ch->r_mem, SATA_SATAITC) >> 16; 764 port = ffs(p) - 1; 765 if (port != (fls(p) - 1)) 766 port = -2; 767 } 768 } 769 } 770 mvs_requeue_frozen(dev); 771 for (i = 0; i < MVS_MAX_SLOTS; i++) { 772 /* XXX: requests in loading state. */ 773 if (((ch->rslots >> i) & 1) == 0) 774 continue; 775 if (port >= 0 && 776 ch->slot[i].ccb->ccb_h.target_id != port) 777 continue; 778 if (iec & EDMA_IE_EDEVERR) { /* Device error. */ 779 if (port != -2) { 780 if (ch->numtslots == 0) { 781 /* Untagged operation. */ 782 if (i == ccs) 783 et = MVS_ERR_TFE; 784 else 785 et = MVS_ERR_INNOCENT; 786 } else { 787 /* Tagged operation. */ 788 et = MVS_ERR_NCQ; 789 } 790 } else { 791 et = MVS_ERR_TFE; 792 ch->fatalerr = 1; 793 } 794 } else if (iec & 0xfc1e9000) { 795 if (ch->numtslots == 0 && 796 i != ccs && port != -2) 797 et = MVS_ERR_INNOCENT; 798 else 799 et = MVS_ERR_SATA; 800 } else 801 et = MVS_ERR_INVALID; 802 mvs_end_transaction(&ch->slot[i], et); 803 } 804 } 805 /* Process SDB-N. */ 806 if (fisic & SATA_FISC_FISWAIT4HOSTRDYEN_B1) 807 mvs_notify_events(dev); 808 if (fisic) 809 ATA_OUTL(ch->r_mem, SATA_FISIC, ~fisic); 810 /* Process hot-plug. */ 811 if ((iec & (EDMA_IE_EDEVDIS | EDMA_IE_EDEVCON)) || 812 (serr & SATA_SE_PHY_CHANGED)) 813 mvs_phy_check_events(dev, serr); 814 } 815 /* Legacy mode device interrupt. */ 816 if ((arg->cause & 2) && !edma) 817 mvs_legacy_intr(dev, arg->cause & 4); 818} 819 820static uint8_t 821mvs_getstatus(device_t dev, int clear) 822{ 823 struct mvs_channel *ch = device_get_softc(dev); 824 uint8_t status = ATA_INB(ch->r_mem, clear ? ATA_STATUS : ATA_ALTSTAT); 825 826 if (ch->fake_busy) { 827 if (status & (ATA_S_BUSY | ATA_S_DRQ | ATA_S_ERROR)) 828 ch->fake_busy = 0; 829 else 830 status |= ATA_S_BUSY; 831 } 832 return (status); 833} 834 835static void 836mvs_legacy_intr(device_t dev, int poll) 837{ 838 struct mvs_channel *ch = device_get_softc(dev); 839 struct mvs_slot *slot = &ch->slot[0]; /* PIO is always in slot 0. */ 840 union ccb *ccb = slot->ccb; 841 enum mvs_err_type et = MVS_ERR_NONE; 842 u_int length, resid, size; 843 uint8_t buf[2]; 844 uint8_t status, ireason; 845 846 /* Clear interrupt and get status. */ 847 status = mvs_getstatus(dev, 1); 848 if (slot->state < MVS_SLOT_RUNNING) 849 return; 850 /* Wait a bit for late !BUSY status update. */ 851 if (status & ATA_S_BUSY) { 852 if (poll) 853 return; 854 DELAY(100); 855 if ((status = mvs_getstatus(dev, 1)) & ATA_S_BUSY) { 856 DELAY(1000); 857 if ((status = mvs_getstatus(dev, 1)) & ATA_S_BUSY) 858 return; 859 } 860 } 861 /* If we got an error, we are done. */ 862 if (status & ATA_S_ERROR) { 863 et = MVS_ERR_TFE; 864 goto end_finished; 865 } 866 if (ccb->ccb_h.func_code == XPT_ATA_IO) { /* ATA PIO */ 867 ccb->ataio.res.status = status; 868 /* Are we moving data? */ 869 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 870 /* If data read command - get them. */ 871 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 872 if (mvs_wait(dev, ATA_S_DRQ, ATA_S_BUSY, 1000) < 0) { 873 device_printf(dev, "timeout waiting for read DRQ\n"); 874 et = MVS_ERR_TIMEOUT; 875 xpt_freeze_simq(ch->sim, 1); 876 ch->toslots |= (1 << slot->slot); 877 goto end_finished; 878 } 879 ATA_INSW_STRM(ch->r_mem, ATA_DATA, 880 (uint16_t *)(ccb->ataio.data_ptr + ch->donecount), 881 ch->transfersize / 2); 882 } 883 /* Update how far we've gotten. */ 884 ch->donecount += ch->transfersize; 885 /* Do we need more? */ 886 if (ccb->ataio.dxfer_len > ch->donecount) { 887 /* Set this transfer size according to HW capabilities */ 888 ch->transfersize = min(ccb->ataio.dxfer_len - ch->donecount, 889 ch->transfersize); 890 /* If data write command - put them */ 891 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 892 if (mvs_wait(dev, ATA_S_DRQ, ATA_S_BUSY, 1000) < 0) { 893 device_printf(dev, 894 "timeout waiting for write DRQ\n"); 895 et = MVS_ERR_TIMEOUT; 896 xpt_freeze_simq(ch->sim, 1); 897 ch->toslots |= (1 << slot->slot); 898 goto end_finished; 899 } 900 ATA_OUTSW_STRM(ch->r_mem, ATA_DATA, 901 (uint16_t *)(ccb->ataio.data_ptr + ch->donecount), 902 ch->transfersize / 2); 903 return; 904 } 905 /* If data read command, return & wait for interrupt */ 906 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 907 return; 908 } 909 } 910 } else if (ch->basic_dma) { /* ATAPI DMA */ 911 if (status & ATA_S_DWF) 912 et = MVS_ERR_TFE; 913 else if (ATA_INL(ch->r_mem, DMA_S) & DMA_S_ERR) 914 et = MVS_ERR_TFE; 915 /* Stop basic DMA. */ 916 ATA_OUTL(ch->r_mem, DMA_C, 0); 917 goto end_finished; 918 } else { /* ATAPI PIO */ 919 length = ATA_INB(ch->r_mem,ATA_CYL_LSB) | 920 (ATA_INB(ch->r_mem,ATA_CYL_MSB) << 8); 921 size = min(ch->transfersize, length); 922 ireason = ATA_INB(ch->r_mem,ATA_IREASON); 923 switch ((ireason & (ATA_I_CMD | ATA_I_IN)) | 924 (status & ATA_S_DRQ)) { 925 case ATAPI_P_CMDOUT: 926 device_printf(dev, "ATAPI CMDOUT\n"); 927 /* Return wait for interrupt */ 928 return; 929 930 case ATAPI_P_WRITE: 931 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 932 device_printf(dev, "trying to write on read buffer\n"); 933 et = MVS_ERR_TFE; 934 goto end_finished; 935 break; 936 } 937 ATA_OUTSW_STRM(ch->r_mem, ATA_DATA, 938 (uint16_t *)(ccb->csio.data_ptr + ch->donecount), 939 (size + 1) / 2); 940 for (resid = ch->transfersize + (size & 1); 941 resid < length; resid += sizeof(int16_t)) 942 ATA_OUTW(ch->r_mem, ATA_DATA, 0); 943 ch->donecount += length; 944 /* Set next transfer size according to HW capabilities */ 945 ch->transfersize = min(ccb->csio.dxfer_len - ch->donecount, 946 ch->curr[ccb->ccb_h.target_id].bytecount); 947 /* Return wait for interrupt */ 948 return; 949 950 case ATAPI_P_READ: 951 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 952 device_printf(dev, "trying to read on write buffer\n"); 953 et = MVS_ERR_TFE; 954 goto end_finished; 955 } 956 if (size >= 2) { 957 ATA_INSW_STRM(ch->r_mem, ATA_DATA, 958 (uint16_t *)(ccb->csio.data_ptr + ch->donecount), 959 size / 2); 960 } 961 if (size & 1) { 962 ATA_INSW_STRM(ch->r_mem, ATA_DATA, (void*)buf, 1); 963 ((uint8_t *)ccb->csio.data_ptr + ch->donecount + 964 (size & ~1))[0] = buf[0]; 965 } 966 for (resid = ch->transfersize + (size & 1); 967 resid < length; resid += sizeof(int16_t)) 968 ATA_INW(ch->r_mem, ATA_DATA); 969 ch->donecount += length; 970 /* Set next transfer size according to HW capabilities */ 971 ch->transfersize = min(ccb->csio.dxfer_len - ch->donecount, 972 ch->curr[ccb->ccb_h.target_id].bytecount); 973 /* Return wait for interrupt */ 974 return; 975 976 case ATAPI_P_DONEDRQ: 977 device_printf(dev, 978 "WARNING - DONEDRQ non conformant device\n"); 979 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 980 ATA_INSW_STRM(ch->r_mem, ATA_DATA, 981 (uint16_t *)(ccb->csio.data_ptr + ch->donecount), 982 length / 2); 983 ch->donecount += length; 984 } 985 else if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 986 ATA_OUTSW_STRM(ch->r_mem, ATA_DATA, 987 (uint16_t *)(ccb->csio.data_ptr + ch->donecount), 988 length / 2); 989 ch->donecount += length; 990 } 991 else 992 et = MVS_ERR_TFE; 993 /* FALLTHROUGH */ 994 995 case ATAPI_P_ABORT: 996 case ATAPI_P_DONE: 997 if (status & (ATA_S_ERROR | ATA_S_DWF)) 998 et = MVS_ERR_TFE; 999 goto end_finished; 1000 1001 default: 1002 device_printf(dev, "unknown transfer phase" 1003 " (status %02x, ireason %02x)\n", 1004 status, ireason); 1005 et = MVS_ERR_TFE; 1006 } 1007 } 1008 1009end_finished: 1010 mvs_end_transaction(slot, et); 1011} 1012 1013static void 1014mvs_crbq_intr(device_t dev) 1015{ 1016 struct mvs_channel *ch = device_get_softc(dev); 1017 struct mvs_crpb *crpb; 1018 union ccb *ccb; 1019 int in_idx, fin_idx, cin_idx, slot; 1020 uint32_t val; 1021 uint16_t flags; 1022 1023 val = ATA_INL(ch->r_mem, EDMA_RESQIP); 1024 if (val == 0) 1025 val = ATA_INL(ch->r_mem, EDMA_RESQIP); 1026 in_idx = (val & EDMA_RESQP_ERPQP_MASK) >> 1027 EDMA_RESQP_ERPQP_SHIFT; 1028 bus_dmamap_sync(ch->dma.workrp_tag, ch->dma.workrp_map, 1029 BUS_DMASYNC_POSTREAD); 1030 fin_idx = cin_idx = ch->in_idx; 1031 ch->in_idx = in_idx; 1032 while (in_idx != cin_idx) { 1033 crpb = (struct mvs_crpb *) 1034 (ch->dma.workrp + MVS_CRPB_OFFSET + 1035 (MVS_CRPB_SIZE * cin_idx)); 1036 slot = le16toh(crpb->id) & MVS_CRPB_TAG_MASK; 1037 flags = le16toh(crpb->rspflg); 1038 /* 1039 * Handle only successful completions here. 1040 * Errors will be handled by main intr handler. 1041 */ 1042#if defined(__i386__) || defined(__amd64__) 1043 if (crpb->id == 0xffff && crpb->rspflg == 0xffff) { 1044 device_printf(dev, "Unfilled CRPB " 1045 "%d (%d->%d) tag %d flags %04x rs %08x\n", 1046 cin_idx, fin_idx, in_idx, slot, flags, ch->rslots); 1047 } else 1048#endif 1049 if (ch->numtslots != 0 || 1050 (flags & EDMA_IE_EDEVERR) == 0) { 1051#if defined(__i386__) || defined(__amd64__) 1052 crpb->id = 0xffff; 1053 crpb->rspflg = 0xffff; 1054#endif 1055 if (ch->slot[slot].state >= MVS_SLOT_RUNNING) { 1056 ccb = ch->slot[slot].ccb; 1057 ccb->ataio.res.status = 1058 (flags & MVS_CRPB_ATASTS_MASK) >> 1059 MVS_CRPB_ATASTS_SHIFT; 1060 mvs_end_transaction(&ch->slot[slot], MVS_ERR_NONE); 1061 } else { 1062 device_printf(dev, "Unused tag in CRPB " 1063 "%d (%d->%d) tag %d flags %04x rs %08x\n", 1064 cin_idx, fin_idx, in_idx, slot, flags, 1065 ch->rslots); 1066 } 1067 } else { 1068 device_printf(dev, 1069 "CRPB with error %d tag %d flags %04x\n", 1070 cin_idx, slot, flags); 1071 } 1072 cin_idx = (cin_idx + 1) & (MVS_MAX_SLOTS - 1); 1073 } 1074 bus_dmamap_sync(ch->dma.workrp_tag, ch->dma.workrp_map, 1075 BUS_DMASYNC_PREREAD); 1076 if (cin_idx == ch->in_idx) { 1077 ATA_OUTL(ch->r_mem, EDMA_RESQOP, 1078 ch->dma.workrp_bus | (cin_idx << EDMA_RESQP_ERPQP_SHIFT)); 1079 } 1080} 1081 1082/* Must be called with channel locked. */ 1083static int 1084mvs_check_collision(device_t dev, union ccb *ccb) 1085{ 1086 struct mvs_channel *ch = device_get_softc(dev); 1087 1088 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1089 /* NCQ DMA */ 1090 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1091 /* Can't mix NCQ and non-NCQ DMA commands. */ 1092 if (ch->numdslots != 0) 1093 return (1); 1094 /* Can't mix NCQ and PIO commands. */ 1095 if (ch->numpslots != 0) 1096 return (1); 1097 /* If we have no FBS */ 1098 if (!ch->fbs_enabled) { 1099 /* Tagged command while tagged to other target is active. */ 1100 if (ch->numtslots != 0 && 1101 ch->taggedtarget != ccb->ccb_h.target_id) 1102 return (1); 1103 } 1104 /* Non-NCQ DMA */ 1105 } else if (ccb->ataio.cmd.flags & CAM_ATAIO_DMA) { 1106 /* Can't mix non-NCQ DMA and NCQ commands. */ 1107 if (ch->numtslots != 0) 1108 return (1); 1109 /* Can't mix non-NCQ DMA and PIO commands. */ 1110 if (ch->numpslots != 0) 1111 return (1); 1112 /* PIO */ 1113 } else { 1114 /* Can't mix PIO with anything. */ 1115 if (ch->numrslots != 0) 1116 return (1); 1117 } 1118 if (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT)) { 1119 /* Atomic command while anything active. */ 1120 if (ch->numrslots != 0) 1121 return (1); 1122 } 1123 } else { /* ATAPI */ 1124 /* ATAPI goes without EDMA, so can't mix it with anything. */ 1125 if (ch->numrslots != 0) 1126 return (1); 1127 } 1128 /* We have some atomic command running. */ 1129 if (ch->aslots != 0) 1130 return (1); 1131 return (0); 1132} 1133 1134static void 1135mvs_tfd_read(device_t dev, union ccb *ccb) 1136{ 1137 struct mvs_channel *ch = device_get_softc(dev); 1138 struct ata_res *res = &ccb->ataio.res; 1139 1140 res->status = ATA_INB(ch->r_mem, ATA_ALTSTAT); 1141 res->error = ATA_INB(ch->r_mem, ATA_ERROR); 1142 res->device = ATA_INB(ch->r_mem, ATA_DRIVE); 1143 ATA_OUTB(ch->r_mem, ATA_CONTROL, ATA_A_HOB); 1144 res->sector_count_exp = ATA_INB(ch->r_mem, ATA_COUNT); 1145 res->lba_low_exp = ATA_INB(ch->r_mem, ATA_SECTOR); 1146 res->lba_mid_exp = ATA_INB(ch->r_mem, ATA_CYL_LSB); 1147 res->lba_high_exp = ATA_INB(ch->r_mem, ATA_CYL_MSB); 1148 ATA_OUTB(ch->r_mem, ATA_CONTROL, 0); 1149 res->sector_count = ATA_INB(ch->r_mem, ATA_COUNT); 1150 res->lba_low = ATA_INB(ch->r_mem, ATA_SECTOR); 1151 res->lba_mid = ATA_INB(ch->r_mem, ATA_CYL_LSB); 1152 res->lba_high = ATA_INB(ch->r_mem, ATA_CYL_MSB); 1153} 1154 1155static void 1156mvs_tfd_write(device_t dev, union ccb *ccb) 1157{ 1158 struct mvs_channel *ch = device_get_softc(dev); 1159 struct ata_cmd *cmd = &ccb->ataio.cmd; 1160 1161 ATA_OUTB(ch->r_mem, ATA_DRIVE, cmd->device); 1162 ATA_OUTB(ch->r_mem, ATA_CONTROL, cmd->control); 1163 ATA_OUTB(ch->r_mem, ATA_FEATURE, cmd->features_exp); 1164 ATA_OUTB(ch->r_mem, ATA_FEATURE, cmd->features); 1165 ATA_OUTB(ch->r_mem, ATA_COUNT, cmd->sector_count_exp); 1166 ATA_OUTB(ch->r_mem, ATA_COUNT, cmd->sector_count); 1167 ATA_OUTB(ch->r_mem, ATA_SECTOR, cmd->lba_low_exp); 1168 ATA_OUTB(ch->r_mem, ATA_SECTOR, cmd->lba_low); 1169 ATA_OUTB(ch->r_mem, ATA_CYL_LSB, cmd->lba_mid_exp); 1170 ATA_OUTB(ch->r_mem, ATA_CYL_LSB, cmd->lba_mid); 1171 ATA_OUTB(ch->r_mem, ATA_CYL_MSB, cmd->lba_high_exp); 1172 ATA_OUTB(ch->r_mem, ATA_CYL_MSB, cmd->lba_high); 1173 ATA_OUTB(ch->r_mem, ATA_COMMAND, cmd->command); 1174} 1175 1176/* Must be called with channel locked. */ 1177static void 1178mvs_begin_transaction(device_t dev, union ccb *ccb) 1179{ 1180 struct mvs_channel *ch = device_get_softc(dev); 1181 struct mvs_slot *slot; 1182 int slotn, tag; 1183 1184 if (ch->pm_level > 0) 1185 mvs_ch_pm_wake(dev); 1186 /* Softreset is a special case. */ 1187 if (ccb->ccb_h.func_code == XPT_ATA_IO && 1188 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL)) { 1189 mvs_softreset(dev, ccb); 1190 return; 1191 } 1192 /* Choose empty slot. */ 1193 slotn = ffs(~ch->oslots) - 1; 1194 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1195 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1196 if (ch->quirks & MVS_Q_GENIIE) 1197 tag = ffs(~ch->otagspd[ccb->ccb_h.target_id]) - 1; 1198 else 1199 tag = slotn; 1200 } else 1201 tag = 0; 1202 /* Occupy chosen slot. */ 1203 slot = &ch->slot[slotn]; 1204 slot->ccb = ccb; 1205 slot->tag = tag; 1206 /* Stop PM timer. */ 1207 if (ch->numrslots == 0 && ch->pm_level > 3) 1208 callout_stop(&ch->pm_timer); 1209 /* Update channel stats. */ 1210 ch->oslots |= (1 << slot->slot); 1211 ch->numrslots++; 1212 ch->numrslotspd[ccb->ccb_h.target_id]++; 1213 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1214 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1215 ch->otagspd[ccb->ccb_h.target_id] |= (1 << slot->tag); 1216 ch->numtslots++; 1217 ch->numtslotspd[ccb->ccb_h.target_id]++; 1218 ch->taggedtarget = ccb->ccb_h.target_id; 1219 mvs_set_edma_mode(dev, MVS_EDMA_NCQ); 1220 } else if (ccb->ataio.cmd.flags & CAM_ATAIO_DMA) { 1221 ch->numdslots++; 1222 mvs_set_edma_mode(dev, MVS_EDMA_ON); 1223 } else { 1224 ch->numpslots++; 1225 mvs_set_edma_mode(dev, MVS_EDMA_OFF); 1226 } 1227 if (ccb->ataio.cmd.flags & 1228 (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT)) { 1229 ch->aslots |= (1 << slot->slot); 1230 } 1231 } else { 1232 uint8_t *cdb = (ccb->ccb_h.flags & CAM_CDB_POINTER) ? 1233 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes; 1234 ch->numpslots++; 1235 /* Use ATAPI DMA only for commands without under-/overruns. */ 1236 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 1237 ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA && 1238 (ch->quirks & MVS_Q_SOC) == 0 && 1239 (cdb[0] == 0x08 || 1240 cdb[0] == 0x0a || 1241 cdb[0] == 0x28 || 1242 cdb[0] == 0x2a || 1243 cdb[0] == 0x88 || 1244 cdb[0] == 0x8a || 1245 cdb[0] == 0xa8 || 1246 cdb[0] == 0xaa || 1247 cdb[0] == 0xbe)) { 1248 ch->basic_dma = 1; 1249 } 1250 mvs_set_edma_mode(dev, MVS_EDMA_OFF); 1251 } 1252 if (ch->numpslots == 0 || ch->basic_dma) { 1253 slot->state = MVS_SLOT_LOADING; 1254 bus_dmamap_load_ccb(ch->dma.data_tag, slot->dma.data_map, 1255 ccb, mvs_dmasetprd, slot, 0); 1256 } else 1257 mvs_legacy_execute_transaction(slot); 1258} 1259 1260/* Locked by busdma engine. */ 1261static void 1262mvs_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1263{ 1264 struct mvs_slot *slot = arg; 1265 struct mvs_channel *ch = device_get_softc(slot->dev); 1266 struct mvs_eprd *eprd; 1267 int i; 1268 1269 if (error) { 1270 device_printf(slot->dev, "DMA load error\n"); 1271 mvs_end_transaction(slot, MVS_ERR_INVALID); 1272 return; 1273 } 1274 KASSERT(nsegs <= MVS_SG_ENTRIES, ("too many DMA segment entries\n")); 1275 /* If there is only one segment - no need to use S/G table on Gen-IIe. */ 1276 if (nsegs == 1 && ch->basic_dma == 0 && (ch->quirks & MVS_Q_GENIIE)) { 1277 slot->dma.addr = segs[0].ds_addr; 1278 slot->dma.len = segs[0].ds_len; 1279 } else { 1280 slot->dma.addr = 0; 1281 /* Get a piece of the workspace for this EPRD */ 1282 eprd = (struct mvs_eprd *)(ch->dma.workrq + slot->eprd_offset); 1283 /* Fill S/G table */ 1284 for (i = 0; i < nsegs; i++) { 1285 eprd[i].prdbal = htole32(segs[i].ds_addr); 1286 eprd[i].bytecount = htole32(segs[i].ds_len & MVS_EPRD_MASK); 1287 eprd[i].prdbah = htole32((segs[i].ds_addr >> 16) >> 16); 1288 } 1289 eprd[i - 1].bytecount |= htole32(MVS_EPRD_EOF); 1290 } 1291 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 1292 ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ? 1293 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); 1294 if (ch->basic_dma) 1295 mvs_legacy_execute_transaction(slot); 1296 else 1297 mvs_execute_transaction(slot); 1298} 1299 1300static void 1301mvs_legacy_execute_transaction(struct mvs_slot *slot) 1302{ 1303 device_t dev = slot->dev; 1304 struct mvs_channel *ch = device_get_softc(dev); 1305 bus_addr_t eprd; 1306 union ccb *ccb = slot->ccb; 1307 int port = ccb->ccb_h.target_id & 0x0f; 1308 int timeout; 1309 1310 slot->state = MVS_SLOT_RUNNING; 1311 ch->rslots |= (1 << slot->slot); 1312 ATA_OUTB(ch->r_mem, SATA_SATAICTL, port << SATA_SATAICTL_PMPTX_SHIFT); 1313 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1314 mvs_tfd_write(dev, ccb); 1315 /* Device reset doesn't interrupt. */ 1316 if (ccb->ataio.cmd.command == ATA_DEVICE_RESET) { 1317 int timeout = 1000000; 1318 do { 1319 DELAY(10); 1320 ccb->ataio.res.status = ATA_INB(ch->r_mem, ATA_STATUS); 1321 } while (ccb->ataio.res.status & ATA_S_BUSY && timeout--); 1322 mvs_legacy_intr(dev, 1); 1323 return; 1324 } 1325 ch->donecount = 0; 1326 if (ccb->ataio.cmd.command == ATA_READ_MUL || 1327 ccb->ataio.cmd.command == ATA_READ_MUL48 || 1328 ccb->ataio.cmd.command == ATA_WRITE_MUL || 1329 ccb->ataio.cmd.command == ATA_WRITE_MUL48) { 1330 ch->transfersize = min(ccb->ataio.dxfer_len, 1331 ch->curr[port].bytecount); 1332 } else 1333 ch->transfersize = min(ccb->ataio.dxfer_len, 512); 1334 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) 1335 ch->fake_busy = 1; 1336 /* If data write command - output the data */ 1337 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 1338 if (mvs_wait(dev, ATA_S_DRQ, ATA_S_BUSY, 1000) < 0) { 1339 device_printf(dev, 1340 "timeout waiting for write DRQ\n"); 1341 xpt_freeze_simq(ch->sim, 1); 1342 ch->toslots |= (1 << slot->slot); 1343 mvs_end_transaction(slot, MVS_ERR_TIMEOUT); 1344 return; 1345 } 1346 ATA_OUTSW_STRM(ch->r_mem, ATA_DATA, 1347 (uint16_t *)(ccb->ataio.data_ptr + ch->donecount), 1348 ch->transfersize / 2); 1349 } 1350 } else { 1351 ch->donecount = 0; 1352 ch->transfersize = min(ccb->csio.dxfer_len, 1353 ch->curr[port].bytecount); 1354 /* Write ATA PACKET command. */ 1355 if (ch->basic_dma) { 1356 ATA_OUTB(ch->r_mem, ATA_FEATURE, ATA_F_DMA); 1357 ATA_OUTB(ch->r_mem, ATA_CYL_LSB, 0); 1358 ATA_OUTB(ch->r_mem, ATA_CYL_MSB, 0); 1359 } else { 1360 ATA_OUTB(ch->r_mem, ATA_FEATURE, 0); 1361 ATA_OUTB(ch->r_mem, ATA_CYL_LSB, ch->transfersize); 1362 ATA_OUTB(ch->r_mem, ATA_CYL_MSB, ch->transfersize >> 8); 1363 } 1364 ATA_OUTB(ch->r_mem, ATA_COMMAND, ATA_PACKET_CMD); 1365 ch->fake_busy = 1; 1366 /* Wait for ready to write ATAPI command block */ 1367 if (mvs_wait(dev, 0, ATA_S_BUSY, 1000) < 0) { 1368 device_printf(dev, "timeout waiting for ATAPI !BUSY\n"); 1369 xpt_freeze_simq(ch->sim, 1); 1370 ch->toslots |= (1 << slot->slot); 1371 mvs_end_transaction(slot, MVS_ERR_TIMEOUT); 1372 return; 1373 } 1374 timeout = 5000; 1375 while (timeout--) { 1376 int reason = ATA_INB(ch->r_mem, ATA_IREASON); 1377 int status = ATA_INB(ch->r_mem, ATA_STATUS); 1378 1379 if (((reason & (ATA_I_CMD | ATA_I_IN)) | 1380 (status & (ATA_S_DRQ | ATA_S_BUSY))) == ATAPI_P_CMDOUT) 1381 break; 1382 DELAY(20); 1383 } 1384 if (timeout <= 0) { 1385 device_printf(dev, 1386 "timeout waiting for ATAPI command ready\n"); 1387 xpt_freeze_simq(ch->sim, 1); 1388 ch->toslots |= (1 << slot->slot); 1389 mvs_end_transaction(slot, MVS_ERR_TIMEOUT); 1390 return; 1391 } 1392 /* Write ATAPI command. */ 1393 ATA_OUTSW_STRM(ch->r_mem, ATA_DATA, 1394 (uint16_t *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 1395 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes), 1396 ch->curr[port].atapi / 2); 1397 DELAY(10); 1398 if (ch->basic_dma) { 1399 /* Start basic DMA. */ 1400 eprd = ch->dma.workrq_bus + slot->eprd_offset; 1401 ATA_OUTL(ch->r_mem, DMA_DTLBA, eprd); 1402 ATA_OUTL(ch->r_mem, DMA_DTHBA, (eprd >> 16) >> 16); 1403 ATA_OUTL(ch->r_mem, DMA_C, DMA_C_START | 1404 (((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) ? 1405 DMA_C_READ : 0)); 1406 } 1407 } 1408 /* Start command execution timeout */ 1409 callout_reset_sbt(&slot->timeout, SBT_1MS * ccb->ccb_h.timeout, 0, 1410 mvs_timeout, slot, 0); 1411} 1412 1413/* Must be called with channel locked. */ 1414static void 1415mvs_execute_transaction(struct mvs_slot *slot) 1416{ 1417 device_t dev = slot->dev; 1418 struct mvs_channel *ch = device_get_softc(dev); 1419 bus_addr_t eprd; 1420 struct mvs_crqb *crqb; 1421 struct mvs_crqb_gen2e *crqb2e; 1422 union ccb *ccb = slot->ccb; 1423 int port = ccb->ccb_h.target_id & 0x0f; 1424 int i; 1425 1426 /* Get address of the prepared EPRD */ 1427 eprd = ch->dma.workrq_bus + slot->eprd_offset; 1428 /* Prepare CRQB. Gen IIe uses different CRQB format. */ 1429 if (ch->quirks & MVS_Q_GENIIE) { 1430 crqb2e = (struct mvs_crqb_gen2e *) 1431 (ch->dma.workrq + MVS_CRQB_OFFSET + (MVS_CRQB_SIZE * ch->out_idx)); 1432 crqb2e->ctrlflg = htole32( 1433 ((ccb->ccb_h.flags & CAM_DIR_IN) ? MVS_CRQB2E_READ : 0) | 1434 (slot->tag << MVS_CRQB2E_DTAG_SHIFT) | 1435 (port << MVS_CRQB2E_PMP_SHIFT) | 1436 (slot->slot << MVS_CRQB2E_HTAG_SHIFT)); 1437 /* If there is only one segment - no need to use S/G table. */ 1438 if (slot->dma.addr != 0) { 1439 eprd = slot->dma.addr; 1440 crqb2e->ctrlflg |= htole32(MVS_CRQB2E_CPRD); 1441 crqb2e->drbc = slot->dma.len; 1442 } 1443 crqb2e->cprdbl = htole32(eprd); 1444 crqb2e->cprdbh = htole32((eprd >> 16) >> 16); 1445 crqb2e->cmd[0] = 0; 1446 crqb2e->cmd[1] = 0; 1447 crqb2e->cmd[2] = ccb->ataio.cmd.command; 1448 crqb2e->cmd[3] = ccb->ataio.cmd.features; 1449 crqb2e->cmd[4] = ccb->ataio.cmd.lba_low; 1450 crqb2e->cmd[5] = ccb->ataio.cmd.lba_mid; 1451 crqb2e->cmd[6] = ccb->ataio.cmd.lba_high; 1452 crqb2e->cmd[7] = ccb->ataio.cmd.device; 1453 crqb2e->cmd[8] = ccb->ataio.cmd.lba_low_exp; 1454 crqb2e->cmd[9] = ccb->ataio.cmd.lba_mid_exp; 1455 crqb2e->cmd[10] = ccb->ataio.cmd.lba_high_exp; 1456 crqb2e->cmd[11] = ccb->ataio.cmd.features_exp; 1457 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1458 crqb2e->cmd[12] = slot->tag << 3; 1459 crqb2e->cmd[13] = 0; 1460 } else { 1461 crqb2e->cmd[12] = ccb->ataio.cmd.sector_count; 1462 crqb2e->cmd[13] = ccb->ataio.cmd.sector_count_exp; 1463 } 1464 crqb2e->cmd[14] = 0; 1465 crqb2e->cmd[15] = 0; 1466 } else { 1467 crqb = (struct mvs_crqb *) 1468 (ch->dma.workrq + MVS_CRQB_OFFSET + (MVS_CRQB_SIZE * ch->out_idx)); 1469 crqb->cprdbl = htole32(eprd); 1470 crqb->cprdbh = htole32((eprd >> 16) >> 16); 1471 crqb->ctrlflg = htole16( 1472 ((ccb->ccb_h.flags & CAM_DIR_IN) ? MVS_CRQB_READ : 0) | 1473 (slot->slot << MVS_CRQB_TAG_SHIFT) | 1474 (port << MVS_CRQB_PMP_SHIFT)); 1475 i = 0; 1476 /* 1477 * Controller can handle only 11 of 12 ATA registers, 1478 * so we have to choose which one to skip. 1479 */ 1480 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1481 crqb->cmd[i++] = ccb->ataio.cmd.features_exp; 1482 crqb->cmd[i++] = 0x11; 1483 } 1484 crqb->cmd[i++] = ccb->ataio.cmd.features; 1485 crqb->cmd[i++] = 0x11; 1486 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1487 crqb->cmd[i++] = (slot->tag << 3) | 1488 (ccb->ataio.cmd.sector_count & 0x07); 1489 crqb->cmd[i++] = 0x12; 1490 } else { 1491 crqb->cmd[i++] = ccb->ataio.cmd.sector_count_exp; 1492 crqb->cmd[i++] = 0x12; 1493 crqb->cmd[i++] = ccb->ataio.cmd.sector_count; 1494 crqb->cmd[i++] = 0x12; 1495 } 1496 crqb->cmd[i++] = ccb->ataio.cmd.lba_low_exp; 1497 crqb->cmd[i++] = 0x13; 1498 crqb->cmd[i++] = ccb->ataio.cmd.lba_low; 1499 crqb->cmd[i++] = 0x13; 1500 crqb->cmd[i++] = ccb->ataio.cmd.lba_mid_exp; 1501 crqb->cmd[i++] = 0x14; 1502 crqb->cmd[i++] = ccb->ataio.cmd.lba_mid; 1503 crqb->cmd[i++] = 0x14; 1504 crqb->cmd[i++] = ccb->ataio.cmd.lba_high_exp; 1505 crqb->cmd[i++] = 0x15; 1506 crqb->cmd[i++] = ccb->ataio.cmd.lba_high; 1507 crqb->cmd[i++] = 0x15; 1508 crqb->cmd[i++] = ccb->ataio.cmd.device; 1509 crqb->cmd[i++] = 0x16; 1510 crqb->cmd[i++] = ccb->ataio.cmd.command; 1511 crqb->cmd[i++] = 0x97; 1512 } 1513 bus_dmamap_sync(ch->dma.workrq_tag, ch->dma.workrq_map, 1514 BUS_DMASYNC_PREWRITE); 1515 bus_dmamap_sync(ch->dma.workrp_tag, ch->dma.workrp_map, 1516 BUS_DMASYNC_PREREAD); 1517 slot->state = MVS_SLOT_RUNNING; 1518 ch->rslots |= (1 << slot->slot); 1519 /* Issue command to the controller. */ 1520 ch->out_idx = (ch->out_idx + 1) & (MVS_MAX_SLOTS - 1); 1521 ATA_OUTL(ch->r_mem, EDMA_REQQIP, 1522 ch->dma.workrq_bus + MVS_CRQB_OFFSET + (MVS_CRQB_SIZE * ch->out_idx)); 1523 /* Start command execution timeout */ 1524 callout_reset_sbt(&slot->timeout, SBT_1MS * ccb->ccb_h.timeout, 0, 1525 mvs_timeout, slot, 0); 1526 return; 1527} 1528 1529/* Must be called with channel locked. */ 1530static void 1531mvs_process_timeout(device_t dev) 1532{ 1533 struct mvs_channel *ch = device_get_softc(dev); 1534 int i; 1535 1536 mtx_assert(&ch->mtx, MA_OWNED); 1537 /* Handle the rest of commands. */ 1538 for (i = 0; i < MVS_MAX_SLOTS; i++) { 1539 /* Do we have a running request on slot? */ 1540 if (ch->slot[i].state < MVS_SLOT_RUNNING) 1541 continue; 1542 mvs_end_transaction(&ch->slot[i], MVS_ERR_TIMEOUT); 1543 } 1544} 1545 1546/* Must be called with channel locked. */ 1547static void 1548mvs_rearm_timeout(device_t dev) 1549{ 1550 struct mvs_channel *ch = device_get_softc(dev); 1551 int i; 1552 1553 mtx_assert(&ch->mtx, MA_OWNED); 1554 for (i = 0; i < MVS_MAX_SLOTS; i++) { 1555 struct mvs_slot *slot = &ch->slot[i]; 1556 1557 /* Do we have a running request on slot? */ 1558 if (slot->state < MVS_SLOT_RUNNING) 1559 continue; 1560 if ((ch->toslots & (1 << i)) == 0) 1561 continue; 1562 callout_reset_sbt(&slot->timeout, 1563 SBT_1MS * slot->ccb->ccb_h.timeout / 2, 0, 1564 mvs_timeout, slot, 0); 1565 } 1566} 1567 1568/* Locked by callout mechanism. */ 1569static void 1570mvs_timeout(void *arg) 1571{ 1572 struct mvs_slot *slot = arg; 1573 device_t dev = slot->dev; 1574 struct mvs_channel *ch = device_get_softc(dev); 1575 1576 /* Check for stale timeout. */ 1577 if (slot->state < MVS_SLOT_RUNNING) 1578 return; 1579 device_printf(dev, "Timeout on slot %d\n", slot->slot); 1580 device_printf(dev, "iec %08x sstat %08x serr %08x edma_s %08x " 1581 "dma_c %08x dma_s %08x rs %08x status %02x\n", 1582 ATA_INL(ch->r_mem, EDMA_IEC), 1583 ATA_INL(ch->r_mem, SATA_SS), ATA_INL(ch->r_mem, SATA_SE), 1584 ATA_INL(ch->r_mem, EDMA_S), ATA_INL(ch->r_mem, DMA_C), 1585 ATA_INL(ch->r_mem, DMA_S), ch->rslots, 1586 ATA_INB(ch->r_mem, ATA_ALTSTAT)); 1587 /* Handle frozen command. */ 1588 mvs_requeue_frozen(dev); 1589 /* We wait for other commands timeout and pray. */ 1590 if (ch->toslots == 0) 1591 xpt_freeze_simq(ch->sim, 1); 1592 ch->toslots |= (1 << slot->slot); 1593 if ((ch->rslots & ~ch->toslots) == 0) 1594 mvs_process_timeout(dev); 1595 else 1596 device_printf(dev, " ... waiting for slots %08x\n", 1597 ch->rslots & ~ch->toslots); 1598} 1599 1600/* Must be called with channel locked. */ 1601static void 1602mvs_end_transaction(struct mvs_slot *slot, enum mvs_err_type et) 1603{ 1604 device_t dev = slot->dev; 1605 struct mvs_channel *ch = device_get_softc(dev); 1606 union ccb *ccb = slot->ccb; 1607 int lastto; 1608 1609 bus_dmamap_sync(ch->dma.workrq_tag, ch->dma.workrq_map, 1610 BUS_DMASYNC_POSTWRITE); 1611 /* Read result registers to the result struct 1612 * May be incorrect if several commands finished same time, 1613 * so read only when sure or have to. 1614 */ 1615 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1616 struct ata_res *res = &ccb->ataio.res; 1617 1618 if ((et == MVS_ERR_TFE) || 1619 (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) { 1620 mvs_tfd_read(dev, ccb); 1621 } else 1622 bzero(res, sizeof(*res)); 1623 } else { 1624 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 1625 ch->basic_dma == 0) 1626 ccb->csio.resid = ccb->csio.dxfer_len - ch->donecount; 1627 } 1628 if (ch->numpslots == 0 || ch->basic_dma) { 1629 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1630 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 1631 (ccb->ccb_h.flags & CAM_DIR_IN) ? 1632 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 1633 bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map); 1634 } 1635 } 1636 if (et != MVS_ERR_NONE) 1637 ch->eslots |= (1 << slot->slot); 1638 /* In case of error, freeze device for proper recovery. */ 1639 if ((et != MVS_ERR_NONE) && (!ch->recoverycmd) && 1640 !(ccb->ccb_h.status & CAM_DEV_QFRZN)) { 1641 xpt_freeze_devq(ccb->ccb_h.path, 1); 1642 ccb->ccb_h.status |= CAM_DEV_QFRZN; 1643 } 1644 /* Set proper result status. */ 1645 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 1646 switch (et) { 1647 case MVS_ERR_NONE: 1648 ccb->ccb_h.status |= CAM_REQ_CMP; 1649 if (ccb->ccb_h.func_code == XPT_SCSI_IO) 1650 ccb->csio.scsi_status = SCSI_STATUS_OK; 1651 break; 1652 case MVS_ERR_INVALID: 1653 ch->fatalerr = 1; 1654 ccb->ccb_h.status |= CAM_REQ_INVALID; 1655 break; 1656 case MVS_ERR_INNOCENT: 1657 ccb->ccb_h.status |= CAM_REQUEUE_REQ; 1658 break; 1659 case MVS_ERR_TFE: 1660 case MVS_ERR_NCQ: 1661 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1662 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1663 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1664 } else { 1665 ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR; 1666 } 1667 break; 1668 case MVS_ERR_SATA: 1669 ch->fatalerr = 1; 1670 if (!ch->recoverycmd) { 1671 xpt_freeze_simq(ch->sim, 1); 1672 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 1673 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 1674 } 1675 ccb->ccb_h.status |= CAM_UNCOR_PARITY; 1676 break; 1677 case MVS_ERR_TIMEOUT: 1678 if (!ch->recoverycmd) { 1679 xpt_freeze_simq(ch->sim, 1); 1680 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 1681 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 1682 } 1683 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 1684 break; 1685 default: 1686 ch->fatalerr = 1; 1687 ccb->ccb_h.status |= CAM_REQ_CMP_ERR; 1688 } 1689 /* Free slot. */ 1690 ch->oslots &= ~(1 << slot->slot); 1691 ch->rslots &= ~(1 << slot->slot); 1692 ch->aslots &= ~(1 << slot->slot); 1693 slot->state = MVS_SLOT_EMPTY; 1694 slot->ccb = NULL; 1695 /* Update channel stats. */ 1696 ch->numrslots--; 1697 ch->numrslotspd[ccb->ccb_h.target_id]--; 1698 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1699 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1700 ch->otagspd[ccb->ccb_h.target_id] &= ~(1 << slot->tag); 1701 ch->numtslots--; 1702 ch->numtslotspd[ccb->ccb_h.target_id]--; 1703 } else if (ccb->ataio.cmd.flags & CAM_ATAIO_DMA) { 1704 ch->numdslots--; 1705 } else { 1706 ch->numpslots--; 1707 } 1708 } else { 1709 ch->numpslots--; 1710 ch->basic_dma = 0; 1711 } 1712 /* Cancel timeout state if request completed normally. */ 1713 if (et != MVS_ERR_TIMEOUT) { 1714 lastto = (ch->toslots == (1 << slot->slot)); 1715 ch->toslots &= ~(1 << slot->slot); 1716 if (lastto) 1717 xpt_release_simq(ch->sim, TRUE); 1718 } 1719 /* If it was our READ LOG command - process it. */ 1720 if (ccb->ccb_h.recovery_type == RECOVERY_READ_LOG) { 1721 mvs_process_read_log(dev, ccb); 1722 /* If it was our REQUEST SENSE command - process it. */ 1723 } else if (ccb->ccb_h.recovery_type == RECOVERY_REQUEST_SENSE) { 1724 mvs_process_request_sense(dev, ccb); 1725 /* If it was NCQ or ATAPI command error, put result on hold. */ 1726 } else if (et == MVS_ERR_NCQ || 1727 ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR && 1728 (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)) { 1729 ch->hold[slot->slot] = ccb; 1730 ch->holdtag[slot->slot] = slot->tag; 1731 ch->numhslots++; 1732 } else 1733 xpt_done(ccb); 1734 /* If we have no other active commands, ... */ 1735 if (ch->rslots == 0) { 1736 /* if there was fatal error - reset port. */ 1737 if (ch->toslots != 0 || ch->fatalerr) { 1738 mvs_reset(dev); 1739 } else { 1740 /* if we have slots in error, we can reinit port. */ 1741 if (ch->eslots != 0) { 1742 mvs_set_edma_mode(dev, MVS_EDMA_OFF); 1743 ch->eslots = 0; 1744 } 1745 /* if there commands on hold, we can do READ LOG. */ 1746 if (!ch->recoverycmd && ch->numhslots) 1747 mvs_issue_recovery(dev); 1748 } 1749 /* If all the rest of commands are in timeout - give them chance. */ 1750 } else if ((ch->rslots & ~ch->toslots) == 0 && 1751 et != MVS_ERR_TIMEOUT) 1752 mvs_rearm_timeout(dev); 1753 /* Unfreeze frozen command. */ 1754 if (ch->frozen && !mvs_check_collision(dev, ch->frozen)) { 1755 union ccb *fccb = ch->frozen; 1756 ch->frozen = NULL; 1757 mvs_begin_transaction(dev, fccb); 1758 xpt_release_simq(ch->sim, TRUE); 1759 } 1760 /* Start PM timer. */ 1761 if (ch->numrslots == 0 && ch->pm_level > 3 && 1762 (ch->curr[ch->pm_present ? 15 : 0].caps & CTS_SATA_CAPS_D_PMREQ)) { 1763 callout_schedule(&ch->pm_timer, 1764 (ch->pm_level == 4) ? hz / 1000 : hz / 8); 1765 } 1766} 1767 1768static void 1769mvs_issue_recovery(device_t dev) 1770{ 1771 struct mvs_channel *ch = device_get_softc(dev); 1772 union ccb *ccb; 1773 struct ccb_ataio *ataio; 1774 struct ccb_scsiio *csio; 1775 int i; 1776 1777 /* Find some held command. */ 1778 for (i = 0; i < MVS_MAX_SLOTS; i++) { 1779 if (ch->hold[i]) 1780 break; 1781 } 1782 ccb = xpt_alloc_ccb_nowait(); 1783 if (ccb == NULL) { 1784 device_printf(dev, "Unable to allocate recovery command\n"); 1785completeall: 1786 /* We can't do anything -- complete held commands. */ 1787 for (i = 0; i < MVS_MAX_SLOTS; i++) { 1788 if (ch->hold[i] == NULL) 1789 continue; 1790 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 1791 ch->hold[i]->ccb_h.status |= CAM_RESRC_UNAVAIL; 1792 xpt_done(ch->hold[i]); 1793 ch->hold[i] = NULL; 1794 ch->numhslots--; 1795 } 1796 mvs_reset(dev); 1797 return; 1798 } 1799 xpt_setup_ccb(&ccb->ccb_h, ch->hold[i]->ccb_h.path, 1800 ch->hold[i]->ccb_h.pinfo.priority); 1801 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1802 /* READ LOG */ 1803 ccb->ccb_h.recovery_type = RECOVERY_READ_LOG; 1804 ccb->ccb_h.func_code = XPT_ATA_IO; 1805 ccb->ccb_h.flags = CAM_DIR_IN; 1806 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 1807 ataio = &ccb->ataio; 1808 ataio->data_ptr = malloc(512, M_MVS, M_NOWAIT); 1809 if (ataio->data_ptr == NULL) { 1810 xpt_free_ccb(ccb); 1811 device_printf(dev, 1812 "Unable to allocate memory for READ LOG command\n"); 1813 goto completeall; 1814 } 1815 ataio->dxfer_len = 512; 1816 bzero(&ataio->cmd, sizeof(ataio->cmd)); 1817 ataio->cmd.flags = CAM_ATAIO_48BIT; 1818 ataio->cmd.command = 0x2F; /* READ LOG EXT */ 1819 ataio->cmd.sector_count = 1; 1820 ataio->cmd.sector_count_exp = 0; 1821 ataio->cmd.lba_low = 0x10; 1822 ataio->cmd.lba_mid = 0; 1823 ataio->cmd.lba_mid_exp = 0; 1824 } else { 1825 /* REQUEST SENSE */ 1826 ccb->ccb_h.recovery_type = RECOVERY_REQUEST_SENSE; 1827 ccb->ccb_h.recovery_slot = i; 1828 ccb->ccb_h.func_code = XPT_SCSI_IO; 1829 ccb->ccb_h.flags = CAM_DIR_IN; 1830 ccb->ccb_h.status = 0; 1831 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 1832 csio = &ccb->csio; 1833 csio->data_ptr = (void *)&ch->hold[i]->csio.sense_data; 1834 csio->dxfer_len = ch->hold[i]->csio.sense_len; 1835 csio->cdb_len = 6; 1836 bzero(&csio->cdb_io, sizeof(csio->cdb_io)); 1837 csio->cdb_io.cdb_bytes[0] = 0x03; 1838 csio->cdb_io.cdb_bytes[4] = csio->dxfer_len; 1839 } 1840 /* Freeze SIM while doing recovery. */ 1841 ch->recoverycmd = 1; 1842 xpt_freeze_simq(ch->sim, 1); 1843 mvs_begin_transaction(dev, ccb); 1844} 1845 1846static void 1847mvs_process_read_log(device_t dev, union ccb *ccb) 1848{ 1849 struct mvs_channel *ch = device_get_softc(dev); 1850 uint8_t *data; 1851 struct ata_res *res; 1852 int i; 1853 1854 ch->recoverycmd = 0; 1855 1856 data = ccb->ataio.data_ptr; 1857 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP && 1858 (data[0] & 0x80) == 0) { 1859 for (i = 0; i < MVS_MAX_SLOTS; i++) { 1860 if (!ch->hold[i]) 1861 continue; 1862 if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id) 1863 continue; 1864 if ((data[0] & 0x1F) == ch->holdtag[i]) { 1865 res = &ch->hold[i]->ataio.res; 1866 res->status = data[2]; 1867 res->error = data[3]; 1868 res->lba_low = data[4]; 1869 res->lba_mid = data[5]; 1870 res->lba_high = data[6]; 1871 res->device = data[7]; 1872 res->lba_low_exp = data[8]; 1873 res->lba_mid_exp = data[9]; 1874 res->lba_high_exp = data[10]; 1875 res->sector_count = data[12]; 1876 res->sector_count_exp = data[13]; 1877 } else { 1878 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 1879 ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ; 1880 } 1881 xpt_done(ch->hold[i]); 1882 ch->hold[i] = NULL; 1883 ch->numhslots--; 1884 } 1885 } else { 1886 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) 1887 device_printf(dev, "Error while READ LOG EXT\n"); 1888 else if ((data[0] & 0x80) == 0) { 1889 device_printf(dev, 1890 "Non-queued command error in READ LOG EXT\n"); 1891 } 1892 for (i = 0; i < MVS_MAX_SLOTS; i++) { 1893 if (!ch->hold[i]) 1894 continue; 1895 if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id) 1896 continue; 1897 xpt_done(ch->hold[i]); 1898 ch->hold[i] = NULL; 1899 ch->numhslots--; 1900 } 1901 } 1902 free(ccb->ataio.data_ptr, M_MVS); 1903 xpt_free_ccb(ccb); 1904 xpt_release_simq(ch->sim, TRUE); 1905} 1906 1907static void 1908mvs_process_request_sense(device_t dev, union ccb *ccb) 1909{ 1910 struct mvs_channel *ch = device_get_softc(dev); 1911 int i; 1912 1913 ch->recoverycmd = 0; 1914 1915 i = ccb->ccb_h.recovery_slot; 1916 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { 1917 ch->hold[i]->ccb_h.status |= CAM_AUTOSNS_VALID; 1918 } else { 1919 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 1920 ch->hold[i]->ccb_h.status |= CAM_AUTOSENSE_FAIL; 1921 } 1922 xpt_done(ch->hold[i]); 1923 ch->hold[i] = NULL; 1924 ch->numhslots--; 1925 xpt_free_ccb(ccb); 1926 xpt_release_simq(ch->sim, TRUE); 1927} 1928 1929static int 1930mvs_wait(device_t dev, u_int s, u_int c, int t) 1931{ 1932 int timeout = 0; 1933 uint8_t st; 1934 1935 while (((st = mvs_getstatus(dev, 0)) & (s | c)) != s) { 1936 if (timeout >= t) { 1937 if (t != 0) 1938 device_printf(dev, "Wait status %02x\n", st); 1939 return (-1); 1940 } 1941 DELAY(1000); 1942 timeout++; 1943 } 1944 return (timeout); 1945} 1946 1947static void 1948mvs_requeue_frozen(device_t dev) 1949{ 1950 struct mvs_channel *ch = device_get_softc(dev); 1951 union ccb *fccb = ch->frozen; 1952 1953 if (fccb) { 1954 ch->frozen = NULL; 1955 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 1956 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 1957 xpt_freeze_devq(fccb->ccb_h.path, 1); 1958 fccb->ccb_h.status |= CAM_DEV_QFRZN; 1959 } 1960 xpt_done(fccb); 1961 } 1962} 1963 1964static void 1965mvs_reset_to(void *arg) 1966{ 1967 device_t dev = arg; 1968 struct mvs_channel *ch = device_get_softc(dev); 1969 int t; 1970 1971 if (ch->resetting == 0) 1972 return; 1973 ch->resetting--; 1974 if ((t = mvs_wait(dev, 0, ATA_S_BUSY | ATA_S_DRQ, 0)) >= 0) { 1975 if (bootverbose) { 1976 device_printf(dev, 1977 "MVS reset: device ready after %dms\n", 1978 (310 - ch->resetting) * 100); 1979 } 1980 ch->resetting = 0; 1981 xpt_release_simq(ch->sim, TRUE); 1982 return; 1983 } 1984 if (ch->resetting == 0) { 1985 device_printf(dev, 1986 "MVS reset: device not ready after 31000ms\n"); 1987 xpt_release_simq(ch->sim, TRUE); 1988 return; 1989 } 1990 callout_schedule(&ch->reset_timer, hz / 10); 1991} 1992 1993static void 1994mvs_errata(device_t dev) 1995{ 1996 struct mvs_channel *ch = device_get_softc(dev); 1997 uint32_t val; 1998 1999 if (ch->quirks & MVS_Q_SOC65) { 2000 val = ATA_INL(ch->r_mem, SATA_PHYM3); 2001 val &= ~(0x3 << 27); /* SELMUPF = 1 */ 2002 val |= (0x1 << 27); 2003 val &= ~(0x3 << 29); /* SELMUPI = 1 */ 2004 val |= (0x1 << 29); 2005 ATA_OUTL(ch->r_mem, SATA_PHYM3, val); 2006 2007 val = ATA_INL(ch->r_mem, SATA_PHYM4); 2008 val &= ~0x1; /* SATU_OD8 = 0 */ 2009 val |= (0x1 << 16); /* reserved bit 16 = 1 */ 2010 ATA_OUTL(ch->r_mem, SATA_PHYM4, val); 2011 2012 val = ATA_INL(ch->r_mem, SATA_PHYM9_GEN2); 2013 val &= ~0xf; /* TXAMP[3:0] = 8 */ 2014 val |= 0x8; 2015 val &= ~(0x1 << 14); /* TXAMP[4] = 0 */ 2016 ATA_OUTL(ch->r_mem, SATA_PHYM9_GEN2, val); 2017 2018 val = ATA_INL(ch->r_mem, SATA_PHYM9_GEN1); 2019 val &= ~0xf; /* TXAMP[3:0] = 8 */ 2020 val |= 0x8; 2021 val &= ~(0x1 << 14); /* TXAMP[4] = 0 */ 2022 ATA_OUTL(ch->r_mem, SATA_PHYM9_GEN1, val); 2023 } 2024} 2025 2026static void 2027mvs_reset(device_t dev) 2028{ 2029 struct mvs_channel *ch = device_get_softc(dev); 2030 int i; 2031 2032 xpt_freeze_simq(ch->sim, 1); 2033 if (bootverbose) 2034 device_printf(dev, "MVS reset...\n"); 2035 /* Forget about previous reset. */ 2036 if (ch->resetting) { 2037 ch->resetting = 0; 2038 callout_stop(&ch->reset_timer); 2039 xpt_release_simq(ch->sim, TRUE); 2040 } 2041 /* Requeue freezed command. */ 2042 mvs_requeue_frozen(dev); 2043 /* Kill the engine and requeue all running commands. */ 2044 mvs_set_edma_mode(dev, MVS_EDMA_OFF); 2045 ATA_OUTL(ch->r_mem, DMA_C, 0); 2046 for (i = 0; i < MVS_MAX_SLOTS; i++) { 2047 /* Do we have a running request on slot? */ 2048 if (ch->slot[i].state < MVS_SLOT_RUNNING) 2049 continue; 2050 /* XXX; Commands in loading state. */ 2051 mvs_end_transaction(&ch->slot[i], MVS_ERR_INNOCENT); 2052 } 2053 for (i = 0; i < MVS_MAX_SLOTS; i++) { 2054 if (!ch->hold[i]) 2055 continue; 2056 xpt_done(ch->hold[i]); 2057 ch->hold[i] = NULL; 2058 ch->numhslots--; 2059 } 2060 if (ch->toslots != 0) 2061 xpt_release_simq(ch->sim, TRUE); 2062 ch->eslots = 0; 2063 ch->toslots = 0; 2064 ch->fatalerr = 0; 2065 ch->fake_busy = 0; 2066 /* Tell the XPT about the event */ 2067 xpt_async(AC_BUS_RESET, ch->path, NULL); 2068 ATA_OUTL(ch->r_mem, EDMA_IEM, 0); 2069 ATA_OUTL(ch->r_mem, EDMA_CMD, EDMA_CMD_EATARST); 2070 DELAY(25); 2071 ATA_OUTL(ch->r_mem, EDMA_CMD, 0); 2072 mvs_errata(dev); 2073 /* Reset and reconnect PHY, */ 2074 if (!mvs_sata_phy_reset(dev)) { 2075 if (bootverbose) 2076 device_printf(dev, "MVS reset: device not found\n"); 2077 ch->devices = 0; 2078 ATA_OUTL(ch->r_mem, SATA_SE, 0xffffffff); 2079 ATA_OUTL(ch->r_mem, EDMA_IEC, 0); 2080 ATA_OUTL(ch->r_mem, EDMA_IEM, ~EDMA_IE_TRANSIENT); 2081 xpt_release_simq(ch->sim, TRUE); 2082 return; 2083 } 2084 if (bootverbose) 2085 device_printf(dev, "MVS reset: device found\n"); 2086 /* Wait for clearing busy status. */ 2087 if ((i = mvs_wait(dev, 0, ATA_S_BUSY | ATA_S_DRQ, 2088 dumping ? 31000 : 0)) < 0) { 2089 if (dumping) { 2090 device_printf(dev, 2091 "MVS reset: device not ready after 31000ms\n"); 2092 } else 2093 ch->resetting = 310; 2094 } else if (bootverbose) 2095 device_printf(dev, "MVS reset: device ready after %dms\n", i); 2096 ch->devices = 1; 2097 ATA_OUTL(ch->r_mem, SATA_SE, 0xffffffff); 2098 ATA_OUTL(ch->r_mem, EDMA_IEC, 0); 2099 ATA_OUTL(ch->r_mem, EDMA_IEM, ~EDMA_IE_TRANSIENT); 2100 if (ch->resetting) 2101 callout_reset(&ch->reset_timer, hz / 10, mvs_reset_to, dev); 2102 else 2103 xpt_release_simq(ch->sim, TRUE); 2104} 2105 2106static void 2107mvs_softreset(device_t dev, union ccb *ccb) 2108{ 2109 struct mvs_channel *ch = device_get_softc(dev); 2110 int port = ccb->ccb_h.target_id & 0x0f; 2111 int i, stuck; 2112 uint8_t status; 2113 2114 mvs_set_edma_mode(dev, MVS_EDMA_OFF); 2115 ATA_OUTB(ch->r_mem, SATA_SATAICTL, port << SATA_SATAICTL_PMPTX_SHIFT); 2116 ATA_OUTB(ch->r_mem, ATA_CONTROL, ATA_A_RESET); 2117 DELAY(10000); 2118 ATA_OUTB(ch->r_mem, ATA_CONTROL, 0); 2119 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2120 /* Wait for clearing busy status. */ 2121 if ((i = mvs_wait(dev, 0, ATA_S_BUSY, ccb->ccb_h.timeout)) < 0) { 2122 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 2123 stuck = 1; 2124 } else { 2125 status = mvs_getstatus(dev, 0); 2126 if (status & ATA_S_ERROR) 2127 ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR; 2128 else 2129 ccb->ccb_h.status |= CAM_REQ_CMP; 2130 if (status & ATA_S_DRQ) 2131 stuck = 1; 2132 else 2133 stuck = 0; 2134 } 2135 mvs_tfd_read(dev, ccb); 2136 2137 /* 2138 * XXX: If some device on PMP failed to soft-reset, 2139 * try to recover by sending dummy soft-reset to PMP. 2140 */ 2141 if (stuck && ch->pm_present && port != 15) { 2142 ATA_OUTB(ch->r_mem, SATA_SATAICTL, 2143 15 << SATA_SATAICTL_PMPTX_SHIFT); 2144 ATA_OUTB(ch->r_mem, ATA_CONTROL, ATA_A_RESET); 2145 DELAY(10000); 2146 ATA_OUTB(ch->r_mem, ATA_CONTROL, 0); 2147 mvs_wait(dev, 0, ATA_S_BUSY | ATA_S_DRQ, ccb->ccb_h.timeout); 2148 } 2149 2150 xpt_done(ccb); 2151} 2152 2153static int 2154mvs_sata_connect(struct mvs_channel *ch) 2155{ 2156 u_int32_t status; 2157 int timeout, found = 0; 2158 2159 /* Wait up to 100ms for "connect well" */ 2160 for (timeout = 0; timeout < 1000 ; timeout++) { 2161 status = ATA_INL(ch->r_mem, SATA_SS); 2162 if ((status & SATA_SS_DET_MASK) != SATA_SS_DET_NO_DEVICE) 2163 found = 1; 2164 if (((status & SATA_SS_DET_MASK) == SATA_SS_DET_PHY_ONLINE) && 2165 ((status & SATA_SS_SPD_MASK) != SATA_SS_SPD_NO_SPEED) && 2166 ((status & SATA_SS_IPM_MASK) == SATA_SS_IPM_ACTIVE)) 2167 break; 2168 if ((status & SATA_SS_DET_MASK) == SATA_SS_DET_PHY_OFFLINE) { 2169 if (bootverbose) { 2170 device_printf(ch->dev, "SATA offline status=%08x\n", 2171 status); 2172 } 2173 return (0); 2174 } 2175 if (found == 0 && timeout >= 100) 2176 break; 2177 DELAY(100); 2178 } 2179 if (timeout >= 1000 || !found) { 2180 if (bootverbose) { 2181 device_printf(ch->dev, 2182 "SATA connect timeout time=%dus status=%08x\n", 2183 timeout * 100, status); 2184 } 2185 return (0); 2186 } 2187 if (bootverbose) { 2188 device_printf(ch->dev, "SATA connect time=%dus status=%08x\n", 2189 timeout * 100, status); 2190 } 2191 /* Clear SATA error register */ 2192 ATA_OUTL(ch->r_mem, SATA_SE, 0xffffffff); 2193 return (1); 2194} 2195 2196static int 2197mvs_sata_phy_reset(device_t dev) 2198{ 2199 struct mvs_channel *ch = device_get_softc(dev); 2200 int sata_rev; 2201 uint32_t val; 2202 2203 sata_rev = ch->user[ch->pm_present ? 15 : 0].revision; 2204 if (sata_rev == 1) 2205 val = SATA_SC_SPD_SPEED_GEN1; 2206 else if (sata_rev == 2) 2207 val = SATA_SC_SPD_SPEED_GEN2; 2208 else if (sata_rev == 3) 2209 val = SATA_SC_SPD_SPEED_GEN3; 2210 else 2211 val = 0; 2212 ATA_OUTL(ch->r_mem, SATA_SC, 2213 SATA_SC_DET_RESET | val | 2214 SATA_SC_IPM_DIS_PARTIAL | SATA_SC_IPM_DIS_SLUMBER); 2215 DELAY(1000); 2216 ATA_OUTL(ch->r_mem, SATA_SC, 2217 SATA_SC_DET_IDLE | val | ((ch->pm_level > 0) ? 0 : 2218 (SATA_SC_IPM_DIS_PARTIAL | SATA_SC_IPM_DIS_SLUMBER))); 2219 if (!mvs_sata_connect(ch)) { 2220 if (ch->pm_level > 0) 2221 ATA_OUTL(ch->r_mem, SATA_SC, SATA_SC_DET_DISABLE); 2222 return (0); 2223 } 2224 return (1); 2225} 2226 2227static int 2228mvs_check_ids(device_t dev, union ccb *ccb) 2229{ 2230 struct mvs_channel *ch = device_get_softc(dev); 2231 2232 if (ccb->ccb_h.target_id > ((ch->quirks & MVS_Q_GENI) ? 0 : 15)) { 2233 ccb->ccb_h.status = CAM_TID_INVALID; 2234 xpt_done(ccb); 2235 return (-1); 2236 } 2237 if (ccb->ccb_h.target_lun != 0) { 2238 ccb->ccb_h.status = CAM_LUN_INVALID; 2239 xpt_done(ccb); 2240 return (-1); 2241 } 2242 /* 2243 * It's a programming error to see AUXILIARY register requests. 2244 */ 2245 KASSERT(ccb->ccb_h.func_code != XPT_ATA_IO || 2246 ((ccb->ataio.ata_flags & ATA_FLAG_AUX) == 0), 2247 ("AUX register unsupported")); 2248 return (0); 2249} 2250 2251static void 2252mvsaction(struct cam_sim *sim, union ccb *ccb) 2253{ 2254 device_t dev, parent; 2255 struct mvs_channel *ch; 2256 2257 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("mvsaction func_code=%x\n", 2258 ccb->ccb_h.func_code)); 2259 2260 ch = (struct mvs_channel *)cam_sim_softc(sim); 2261 dev = ch->dev; 2262 switch (ccb->ccb_h.func_code) { 2263 /* Common cases first */ 2264 case XPT_ATA_IO: /* Execute the requested I/O operation */ 2265 case XPT_SCSI_IO: 2266 if (mvs_check_ids(dev, ccb)) 2267 return; 2268 if (ch->devices == 0 || 2269 (ch->pm_present == 0 && 2270 ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) { 2271 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2272 break; 2273 } 2274 ccb->ccb_h.recovery_type = RECOVERY_NONE; 2275 /* Check for command collision. */ 2276 if (mvs_check_collision(dev, ccb)) { 2277 /* Freeze command. */ 2278 ch->frozen = ccb; 2279 /* We have only one frozen slot, so freeze simq also. */ 2280 xpt_freeze_simq(ch->sim, 1); 2281 return; 2282 } 2283 mvs_begin_transaction(dev, ccb); 2284 return; 2285 case XPT_ABORT: /* Abort the specified CCB */ 2286 /* XXX Implement */ 2287 ccb->ccb_h.status = CAM_REQ_INVALID; 2288 break; 2289 case XPT_SET_TRAN_SETTINGS: 2290 { 2291 struct ccb_trans_settings *cts = &ccb->cts; 2292 struct mvs_device *d; 2293 2294 if (mvs_check_ids(dev, ccb)) 2295 return; 2296 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 2297 d = &ch->curr[ccb->ccb_h.target_id]; 2298 else 2299 d = &ch->user[ccb->ccb_h.target_id]; 2300 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION) 2301 d->revision = cts->xport_specific.sata.revision; 2302 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE) 2303 d->mode = cts->xport_specific.sata.mode; 2304 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) { 2305 d->bytecount = min((ch->quirks & MVS_Q_GENIIE) ? 8192 : 2048, 2306 cts->xport_specific.sata.bytecount); 2307 } 2308 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS) 2309 d->tags = min(MVS_MAX_SLOTS, cts->xport_specific.sata.tags); 2310 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM) 2311 ch->pm_present = cts->xport_specific.sata.pm_present; 2312 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_ATAPI) 2313 d->atapi = cts->xport_specific.sata.atapi; 2314 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS) 2315 d->caps = cts->xport_specific.sata.caps; 2316 ccb->ccb_h.status = CAM_REQ_CMP; 2317 break; 2318 } 2319 case XPT_GET_TRAN_SETTINGS: 2320 /* Get default/user set transfer settings for the target */ 2321 { 2322 struct ccb_trans_settings *cts = &ccb->cts; 2323 struct mvs_device *d; 2324 uint32_t status; 2325 2326 if (mvs_check_ids(dev, ccb)) 2327 return; 2328 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 2329 d = &ch->curr[ccb->ccb_h.target_id]; 2330 else 2331 d = &ch->user[ccb->ccb_h.target_id]; 2332 cts->protocol = PROTO_UNSPECIFIED; 2333 cts->protocol_version = PROTO_VERSION_UNSPECIFIED; 2334 cts->transport = XPORT_SATA; 2335 cts->transport_version = XPORT_VERSION_UNSPECIFIED; 2336 cts->proto_specific.valid = 0; 2337 cts->xport_specific.sata.valid = 0; 2338 if (cts->type == CTS_TYPE_CURRENT_SETTINGS && 2339 (ccb->ccb_h.target_id == 15 || 2340 (ccb->ccb_h.target_id == 0 && !ch->pm_present))) { 2341 status = ATA_INL(ch->r_mem, SATA_SS) & SATA_SS_SPD_MASK; 2342 if (status & 0x0f0) { 2343 cts->xport_specific.sata.revision = 2344 (status & 0x0f0) >> 4; 2345 cts->xport_specific.sata.valid |= 2346 CTS_SATA_VALID_REVISION; 2347 } 2348 cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D; 2349// if (ch->pm_level) 2350// cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ; 2351 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_AN; 2352 cts->xport_specific.sata.caps &= 2353 ch->user[ccb->ccb_h.target_id].caps; 2354 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 2355 } else { 2356 cts->xport_specific.sata.revision = d->revision; 2357 cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION; 2358 cts->xport_specific.sata.caps = d->caps; 2359 if (cts->type == CTS_TYPE_CURRENT_SETTINGS/* && 2360 (ch->quirks & MVS_Q_GENIIE) == 0*/) 2361 cts->xport_specific.sata.caps &= ~CTS_SATA_CAPS_H_AN; 2362 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 2363 } 2364 cts->xport_specific.sata.mode = d->mode; 2365 cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE; 2366 cts->xport_specific.sata.bytecount = d->bytecount; 2367 cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT; 2368 cts->xport_specific.sata.pm_present = ch->pm_present; 2369 cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM; 2370 cts->xport_specific.sata.tags = d->tags; 2371 cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS; 2372 cts->xport_specific.sata.atapi = d->atapi; 2373 cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI; 2374 ccb->ccb_h.status = CAM_REQ_CMP; 2375 break; 2376 } 2377 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 2378 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 2379 mvs_reset(dev); 2380 ccb->ccb_h.status = CAM_REQ_CMP; 2381 break; 2382 case XPT_TERM_IO: /* Terminate the I/O process */ 2383 /* XXX Implement */ 2384 ccb->ccb_h.status = CAM_REQ_INVALID; 2385 break; 2386 case XPT_PATH_INQ: /* Path routing inquiry */ 2387 { 2388 struct ccb_pathinq *cpi = &ccb->cpi; 2389 2390 parent = device_get_parent(dev); 2391 cpi->version_num = 1; /* XXX??? */ 2392 cpi->hba_inquiry = PI_SDTR_ABLE; 2393 if (!(ch->quirks & MVS_Q_GENI)) { 2394 cpi->hba_inquiry |= PI_SATAPM; 2395 /* Gen-II is extremely slow with NCQ on PMP. */ 2396 if ((ch->quirks & MVS_Q_GENIIE) || ch->pm_present == 0) 2397 cpi->hba_inquiry |= PI_TAG_ABLE; 2398 } 2399 cpi->target_sprt = 0; 2400 cpi->hba_misc = PIM_SEQSCAN; 2401 cpi->hba_eng_cnt = 0; 2402 if (!(ch->quirks & MVS_Q_GENI)) 2403 cpi->max_target = 15; 2404 else 2405 cpi->max_target = 0; 2406 cpi->max_lun = 0; 2407 cpi->initiator_id = 0; 2408 cpi->bus_id = cam_sim_bus(sim); 2409 cpi->base_transfer_speed = 150000; 2410 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2411 strlcpy(cpi->hba_vid, "Marvell", HBA_IDLEN); 2412 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2413 cpi->unit_number = cam_sim_unit(sim); 2414 cpi->transport = XPORT_SATA; 2415 cpi->transport_version = XPORT_VERSION_UNSPECIFIED; 2416 cpi->protocol = PROTO_ATA; 2417 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED; 2418 cpi->maxio = maxphys; 2419 if ((ch->quirks & MVS_Q_SOC) == 0) { 2420 cpi->hba_vendor = pci_get_vendor(parent); 2421 cpi->hba_device = pci_get_device(parent); 2422 cpi->hba_subvendor = pci_get_subvendor(parent); 2423 cpi->hba_subdevice = pci_get_subdevice(parent); 2424 } 2425 cpi->ccb_h.status = CAM_REQ_CMP; 2426 break; 2427 } 2428 default: 2429 ccb->ccb_h.status = CAM_REQ_INVALID; 2430 break; 2431 } 2432 xpt_done(ccb); 2433} 2434 2435static void 2436mvspoll(struct cam_sim *sim) 2437{ 2438 struct mvs_channel *ch = (struct mvs_channel *)cam_sim_softc(sim); 2439 struct mvs_intr_arg arg; 2440 2441 arg.arg = ch->dev; 2442 arg.cause = 2 | 4; /* XXX */ 2443 mvs_ch_intr(&arg); 2444 if (ch->resetting != 0 && 2445 (--ch->resetpolldiv <= 0 || !callout_pending(&ch->reset_timer))) { 2446 ch->resetpolldiv = 1000; 2447 mvs_reset_to(ch->dev); 2448 } 2449} 2450