1/*- 2 * Copyright (c) 2003-2007 Nate Lawson 3 * Copyright (c) 2000 Michael Smith 4 * Copyright (c) 2000 BSDi 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29#include <sys/cdefs.h> 30#include "opt_acpi.h" 31#include <sys/param.h> 32#include <sys/kernel.h> 33#include <sys/ktr.h> 34#include <sys/bus.h> 35#include <sys/lock.h> 36#include <sys/malloc.h> 37#include <sys/module.h> 38#include <sys/sx.h> 39 40#include <machine/bus.h> 41#include <machine/resource.h> 42#include <sys/rman.h> 43 44#include <contrib/dev/acpica/include/acpi.h> 45#include <contrib/dev/acpica/include/accommon.h> 46 47#include <dev/acpica/acpivar.h> 48 49/* Hooks for the ACPI CA debugging infrastructure */ 50#define _COMPONENT ACPI_EC 51ACPI_MODULE_NAME("EC") 52 53/* 54 * EC_COMMAND: 55 * ----------- 56 */ 57typedef UINT8 EC_COMMAND; 58 59#define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00) 60#define EC_COMMAND_READ ((EC_COMMAND) 0x80) 61#define EC_COMMAND_WRITE ((EC_COMMAND) 0x81) 62#define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82) 63#define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83) 64#define EC_COMMAND_QUERY ((EC_COMMAND) 0x84) 65 66/* 67 * EC_STATUS: 68 * ---------- 69 * The encoding of the EC status register is illustrated below. 70 * Note that a set bit (1) indicates the property is TRUE 71 * (e.g. if bit 0 is set then the output buffer is full). 72 * +-+-+-+-+-+-+-+-+ 73 * |7|6|5|4|3|2|1|0| 74 * +-+-+-+-+-+-+-+-+ 75 * | | | | | | | | 76 * | | | | | | | +- Output Buffer Full? 77 * | | | | | | +--- Input Buffer Full? 78 * | | | | | +----- <reserved> 79 * | | | | +------- Data Register is Command Byte? 80 * | | | +--------- Burst Mode Enabled? 81 * | | +----------- SCI Event? 82 * | +------------- SMI Event? 83 * +--------------- <reserved> 84 * 85 */ 86typedef UINT8 EC_STATUS; 87 88#define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01) 89#define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02) 90#define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08) 91#define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10) 92 93/* 94 * EC_EVENT: 95 * --------- 96 */ 97typedef UINT8 EC_EVENT; 98 99#define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00) 100#define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01) 101#define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02) 102#define EC_EVENT_SCI ((EC_EVENT) 0x20) 103#define EC_EVENT_SMI ((EC_EVENT) 0x40) 104 105/* Data byte returned after burst enable indicating it was successful. */ 106#define EC_BURST_ACK 0x90 107 108/* 109 * Register access primitives 110 */ 111#define EC_GET_DATA(sc) \ 112 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0) 113 114#define EC_SET_DATA(sc, v) \ 115 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v)) 116 117#define EC_GET_CSR(sc) \ 118 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0) 119 120#define EC_SET_CSR(sc, v) \ 121 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v)) 122 123/* Additional params to pass from the probe routine */ 124struct acpi_ec_params { 125 int glk; 126 int gpe_bit; 127 ACPI_HANDLE gpe_handle; 128 int uid; 129}; 130 131/* 132 * Driver softc. 133 */ 134struct acpi_ec_softc { 135 device_t ec_dev; 136 ACPI_HANDLE ec_handle; 137 int ec_uid; 138 ACPI_HANDLE ec_gpehandle; 139 UINT8 ec_gpebit; 140 141 int ec_data_rid; 142 struct resource *ec_data_res; 143 bus_space_tag_t ec_data_tag; 144 bus_space_handle_t ec_data_handle; 145 146 int ec_csr_rid; 147 struct resource *ec_csr_res; 148 bus_space_tag_t ec_csr_tag; 149 bus_space_handle_t ec_csr_handle; 150 151 int ec_glk; 152 int ec_glkhandle; 153 int ec_burstactive; 154 int ec_sci_pend; 155 volatile u_int ec_gencount; 156 int ec_suspending; 157}; 158 159/* 160 * XXX njl 161 * I couldn't find it in the spec but other implementations also use a 162 * value of 1 ms for the time to acquire global lock. 163 */ 164#define EC_LOCK_TIMEOUT 1000 165 166/* Default delay in microseconds between each run of the status polling loop. */ 167#define EC_POLL_DELAY 50 168 169/* Total time in ms spent waiting for a response from EC. */ 170#define EC_TIMEOUT 750 171 172#define EVENT_READY(event, status) \ 173 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \ 174 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \ 175 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \ 176 ((status) & EC_FLAG_INPUT_BUFFER) == 0)) 177 178ACPI_SERIAL_DECL(ec, "ACPI embedded controller"); 179 180static SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, 181 CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 182 "EC debugging"); 183 184static int ec_burst_mode; 185SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RWTUN, &ec_burst_mode, 0, 186 "Enable use of burst mode (faster for nearly all systems)"); 187static int ec_polled_mode; 188SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RWTUN, &ec_polled_mode, 0, 189 "Force use of polled mode (only if interrupt mode doesn't work)"); 190static int ec_timeout = EC_TIMEOUT; 191SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RWTUN, &ec_timeout, 192 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)"); 193 194static ACPI_STATUS 195EcLock(struct acpi_ec_softc *sc) 196{ 197 ACPI_STATUS status; 198 199 /* If _GLK is non-zero, acquire the global lock. */ 200 status = AE_OK; 201 if (sc->ec_glk) { 202 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle); 203 if (ACPI_FAILURE(status)) 204 return (status); 205 } 206 ACPI_SERIAL_BEGIN(ec); 207 return (status); 208} 209 210static void 211EcUnlock(struct acpi_ec_softc *sc) 212{ 213 ACPI_SERIAL_END(ec); 214 if (sc->ec_glk) 215 AcpiReleaseGlobalLock(sc->ec_glkhandle); 216} 217 218static UINT32 EcGpeHandler(ACPI_HANDLE, UINT32, void *); 219static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, 220 void *Context, void **return_Context); 221static ACPI_STATUS EcSpaceHandler(UINT32 Function, 222 ACPI_PHYSICAL_ADDRESS Address, 223 UINT32 Width, UINT64 *Value, 224 void *Context, void *RegionContext); 225static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, 226 u_int gen_count); 227static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd); 228static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address, 229 UINT8 *Data); 230static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address, 231 UINT8 Data); 232static int acpi_ec_probe(device_t dev); 233static int acpi_ec_attach(device_t dev); 234static int acpi_ec_suspend(device_t dev); 235static int acpi_ec_resume(device_t dev); 236static int acpi_ec_shutdown(device_t dev); 237static int acpi_ec_read_method(device_t dev, u_int addr, 238 UINT64 *val, int width); 239static int acpi_ec_write_method(device_t dev, u_int addr, 240 UINT64 val, int width); 241 242static device_method_t acpi_ec_methods[] = { 243 /* Device interface */ 244 DEVMETHOD(device_probe, acpi_ec_probe), 245 DEVMETHOD(device_attach, acpi_ec_attach), 246 DEVMETHOD(device_suspend, acpi_ec_suspend), 247 DEVMETHOD(device_resume, acpi_ec_resume), 248 DEVMETHOD(device_shutdown, acpi_ec_shutdown), 249 250 /* Embedded controller interface */ 251 DEVMETHOD(acpi_ec_read, acpi_ec_read_method), 252 DEVMETHOD(acpi_ec_write, acpi_ec_write_method), 253 254 DEVMETHOD_END 255}; 256 257static driver_t acpi_ec_driver = { 258 "acpi_ec", 259 acpi_ec_methods, 260 sizeof(struct acpi_ec_softc), 261}; 262 263DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, 0, 0); 264MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1); 265 266/* 267 * Look for an ECDT and if we find one, set up default GPE and 268 * space handlers to catch attempts to access EC space before 269 * we have a real driver instance in place. 270 * 271 * TODO: Some old Gateway laptops need us to fake up an ECDT or 272 * otherwise attach early so that _REG methods can run. 273 */ 274void 275acpi_ec_ecdt_probe(device_t parent) 276{ 277 ACPI_TABLE_ECDT *ecdt; 278 ACPI_STATUS status; 279 device_t child; 280 ACPI_HANDLE h; 281 struct acpi_ec_params *params; 282 283 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 284 285 /* Find and validate the ECDT. */ 286 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt); 287 if (ACPI_FAILURE(status) || 288 ecdt->Control.BitWidth != 8 || 289 ecdt->Data.BitWidth != 8) { 290 return; 291 } 292 293 /* Create the child device with the given unit number. */ 294 child = BUS_ADD_CHILD(parent, 3, "acpi_ec", ecdt->Uid); 295 if (child == NULL) { 296 printf("%s: can't add child\n", __func__); 297 return; 298 } 299 300 /* Find and save the ACPI handle for this device. */ 301 status = AcpiGetHandle(NULL, ecdt->Id, &h); 302 if (ACPI_FAILURE(status)) { 303 device_delete_child(parent, child); 304 printf("%s: can't get handle\n", __func__); 305 return; 306 } 307 acpi_set_handle(child, h); 308 309 /* Set the data and CSR register addresses. */ 310 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address, 311 /*count*/1); 312 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address, 313 /*count*/1); 314 315 /* 316 * Store values for the probe/attach routines to use. Store the 317 * ECDT GPE bit and set the global lock flag according to _GLK. 318 * Note that it is not perfectly correct to be evaluating a method 319 * before initializing devices, but in practice this function 320 * should be safe to call at this point. 321 */ 322 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO); 323 params->gpe_handle = NULL; 324 params->gpe_bit = ecdt->Gpe; 325 params->uid = ecdt->Uid; 326 acpi_GetInteger(h, "_GLK", ¶ms->glk); 327 acpi_set_private(child, params); 328 329 /* Finish the attach process. */ 330 if (device_probe_and_attach(child) != 0) 331 device_delete_child(parent, child); 332} 333 334static int 335acpi_ec_probe(device_t dev) 336{ 337 ACPI_BUFFER buf; 338 ACPI_HANDLE h; 339 ACPI_OBJECT *obj; 340 ACPI_STATUS status; 341 device_t peer; 342 int ecdt; 343 int ret, rc; 344 struct acpi_ec_params *params; 345 static char *ec_ids[] = { "PNP0C09", NULL }; 346 347 ret = ENXIO; 348 349 /* Check that this is a device and that EC is not disabled. */ 350 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec")) 351 return (ret); 352 353 if (device_is_devclass_fixed(dev)) { 354 /* 355 * If probed via ECDT, set description and continue. Otherwise, we can 356 * access the namespace and make sure this is not a duplicate probe. 357 */ 358 ecdt = 1; 359 params = acpi_get_private(dev); 360 if (params != NULL) 361 ret = 0; 362 363 goto out; 364 } else 365 ecdt = 0; 366 367 rc = ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids, NULL); 368 if (rc > 0) 369 return (rc); 370 371 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO); 372 373 buf.Pointer = NULL; 374 buf.Length = ACPI_ALLOCATE_BUFFER; 375 h = acpi_get_handle(dev); 376 377 /* 378 * Read the unit ID to check for duplicate attach and the global lock value 379 * to see if we should acquire it when accessing the EC. 380 */ 381 status = acpi_GetInteger(h, "_UID", ¶ms->uid); 382 if (ACPI_FAILURE(status)) 383 params->uid = 0; 384 385 /* 386 * Check for a duplicate probe. This can happen when a probe via ECDT 387 * succeeded already. If this is a duplicate, disable this device. 388 * 389 * NB: It would seem device_disable would be sufficient to not get 390 * duplicated devices, and ENXIO isn't needed, however, device_probe() only 391 * checks DF_ENABLED at the start and so disabling it here is too late to 392 * prevent device_attach() from being called. 393 */ 394 peer = devclass_get_device(device_get_devclass(dev), params->uid); 395 if (peer != NULL && device_is_alive(peer)) { 396 device_disable(dev); 397 goto out; 398 } 399 400 status = acpi_GetInteger(h, "_GLK", ¶ms->glk); 401 if (ACPI_FAILURE(status)) 402 params->glk = 0; 403 404 /* 405 * Evaluate the _GPE method to find the GPE bit used by the EC to signal 406 * status (SCI). If it's a package, it contains a reference and GPE bit, 407 * similar to _PRW. 408 */ 409 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf); 410 if (ACPI_FAILURE(status)) { 411 device_printf(dev, "can't evaluate _GPE - %s\n", AcpiFormatException(status)); 412 goto out; 413 } 414 415 obj = (ACPI_OBJECT *)buf.Pointer; 416 if (obj == NULL) 417 goto out; 418 419 switch (obj->Type) { 420 case ACPI_TYPE_INTEGER: 421 params->gpe_handle = NULL; 422 params->gpe_bit = obj->Integer.Value; 423 break; 424 case ACPI_TYPE_PACKAGE: 425 if (!ACPI_PKG_VALID(obj, 2)) 426 goto out; 427 params->gpe_handle = acpi_GetReference(NULL, &obj->Package.Elements[0]); 428 if (params->gpe_handle == NULL || 429 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0) 430 goto out; 431 break; 432 default: 433 device_printf(dev, "_GPE has invalid type %d\n", obj->Type); 434 goto out; 435 } 436 437 /* Store the values we got from the namespace for attach. */ 438 acpi_set_private(dev, params); 439 440 if (buf.Pointer) 441 AcpiOsFree(buf.Pointer); 442 443 ret = rc; 444out: 445 if (ret <= 0) { 446 device_set_descf(dev, "Embedded Controller: GPE %#x%s%s", 447 params->gpe_bit, (params->glk) ? ", GLK" : "", 448 ecdt ? ", ECDT" : ""); 449 } else 450 free(params, M_TEMP); 451 452 return (ret); 453} 454 455static int 456acpi_ec_attach(device_t dev) 457{ 458 struct acpi_ec_softc *sc; 459 struct acpi_ec_params *params; 460 ACPI_STATUS Status; 461 462 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 463 464 /* Fetch/initialize softc (assumes softc is pre-zeroed). */ 465 sc = device_get_softc(dev); 466 params = acpi_get_private(dev); 467 sc->ec_dev = dev; 468 sc->ec_handle = acpi_get_handle(dev); 469 470 /* Retrieve previously probed values via device ivars. */ 471 sc->ec_glk = params->glk; 472 sc->ec_gpebit = params->gpe_bit; 473 sc->ec_gpehandle = params->gpe_handle; 474 sc->ec_uid = params->uid; 475 sc->ec_suspending = FALSE; 476 acpi_set_private(dev, NULL); 477 free(params, M_TEMP); 478 479 /* Attach bus resources for data and command/status ports. */ 480 sc->ec_data_rid = 0; 481 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 482 &sc->ec_data_rid, RF_ACTIVE); 483 if (sc->ec_data_res == NULL) { 484 device_printf(dev, "can't allocate data port\n"); 485 goto error; 486 } 487 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res); 488 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res); 489 490 sc->ec_csr_rid = 1; 491 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 492 &sc->ec_csr_rid, RF_ACTIVE); 493 if (sc->ec_csr_res == NULL) { 494 device_printf(dev, "can't allocate command/status port\n"); 495 goto error; 496 } 497 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res); 498 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res); 499 500 /* 501 * Install a handler for this EC's GPE bit. We want edge-triggered 502 * behavior. 503 */ 504 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n")); 505 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, 506 ACPI_GPE_EDGE_TRIGGERED, EcGpeHandler, sc); 507 if (ACPI_FAILURE(Status)) { 508 device_printf(dev, "can't install GPE handler for %s - %s\n", 509 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 510 goto error; 511 } 512 513 /* 514 * Install address space handler 515 */ 516 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n")); 517 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 518 &EcSpaceHandler, &EcSpaceSetup, sc); 519 if (ACPI_FAILURE(Status)) { 520 device_printf(dev, "can't install address space handler for %s - %s\n", 521 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 522 goto error; 523 } 524 525 /* Enable runtime GPEs for the handler. */ 526 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit); 527 if (ACPI_FAILURE(Status)) { 528 device_printf(dev, "AcpiEnableGpe failed: %s\n", 529 AcpiFormatException(Status)); 530 goto error; 531 } 532 533 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n")); 534 return (0); 535 536error: 537 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, EcGpeHandler); 538 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 539 EcSpaceHandler); 540 if (sc->ec_csr_res) 541 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid, 542 sc->ec_csr_res); 543 if (sc->ec_data_res) 544 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid, 545 sc->ec_data_res); 546 return (ENXIO); 547} 548 549static int 550acpi_ec_suspend(device_t dev) 551{ 552 struct acpi_ec_softc *sc; 553 554 sc = device_get_softc(dev); 555 sc->ec_suspending = TRUE; 556 return (0); 557} 558 559static int 560acpi_ec_resume(device_t dev) 561{ 562 struct acpi_ec_softc *sc; 563 564 sc = device_get_softc(dev); 565 sc->ec_suspending = FALSE; 566 return (0); 567} 568 569static int 570acpi_ec_shutdown(device_t dev) 571{ 572 struct acpi_ec_softc *sc; 573 574 /* Disable the GPE so we don't get EC events during shutdown. */ 575 sc = device_get_softc(dev); 576 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit); 577 return (0); 578} 579 580/* Methods to allow other devices (e.g., smbat) to read/write EC space. */ 581static int 582acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width) 583{ 584 struct acpi_ec_softc *sc; 585 ACPI_STATUS status; 586 587 sc = device_get_softc(dev); 588 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL); 589 if (ACPI_FAILURE(status)) 590 return (ENXIO); 591 return (0); 592} 593 594static int 595acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width) 596{ 597 struct acpi_ec_softc *sc; 598 ACPI_STATUS status; 599 600 sc = device_get_softc(dev); 601 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL); 602 if (ACPI_FAILURE(status)) 603 return (ENXIO); 604 return (0); 605} 606 607static ACPI_STATUS 608EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event) 609{ 610 ACPI_STATUS status; 611 EC_STATUS ec_status; 612 613 status = AE_NO_HARDWARE_RESPONSE; 614 ec_status = EC_GET_CSR(sc); 615 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) { 616 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg); 617 sc->ec_burstactive = FALSE; 618 } 619 if (EVENT_READY(event, ec_status)) { 620 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status); 621 status = AE_OK; 622 } 623 return (status); 624} 625 626static void 627EcGpeQueryHandlerSub(struct acpi_ec_softc *sc) 628{ 629 UINT8 Data; 630 ACPI_STATUS Status; 631 int retry; 632 char qxx[5]; 633 634 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 635 636 /* Serialize user access with EcSpaceHandler(). */ 637 Status = EcLock(sc); 638 if (ACPI_FAILURE(Status)) { 639 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n", 640 AcpiFormatException(Status)); 641 return; 642 } 643 644 /* 645 * Send a query command to the EC to find out which _Qxx call it 646 * wants to make. This command clears the SCI bit and also the 647 * interrupt source since we are edge-triggered. To prevent the GPE 648 * that may arise from running the query from causing another query 649 * to be queued, we clear the pending flag only after running it. 650 */ 651 for (retry = 0; retry < 2; retry++) { 652 Status = EcCommand(sc, EC_COMMAND_QUERY); 653 if (ACPI_SUCCESS(Status)) 654 break; 655 if (ACPI_FAILURE(EcCheckStatus(sc, "retr_check", 656 EC_EVENT_INPUT_BUFFER_EMPTY))) 657 break; 658 } 659 if (ACPI_FAILURE(Status)) { 660 EcUnlock(sc); 661 device_printf(sc->ec_dev, "GPE query failed: %s\n", 662 AcpiFormatException(Status)); 663 return; 664 } 665 Data = EC_GET_DATA(sc); 666 667 /* 668 * We have to unlock before running the _Qxx method below since that 669 * method may attempt to read/write from EC address space, causing 670 * recursive acquisition of the lock. 671 */ 672 EcUnlock(sc); 673 674 /* Ignore the value for "no outstanding event". (13.3.5) */ 675 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data); 676 if (Data == 0) 677 return; 678 679 /* Evaluate _Qxx to respond to the controller. */ 680 snprintf(qxx, sizeof(qxx), "_Q%02X", Data); 681 AcpiUtStrupr(qxx); 682 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL); 683 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) { 684 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n", 685 qxx, AcpiFormatException(Status)); 686 } 687} 688 689static void 690EcGpeQueryHandler(void *Context) 691{ 692 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 693 int pending; 694 695 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL")); 696 697 do { 698 /* Read the current pending count */ 699 pending = atomic_load_acq_int(&sc->ec_sci_pend); 700 701 /* Call GPE handler function */ 702 EcGpeQueryHandlerSub(sc); 703 704 /* 705 * Try to reset the pending count to zero. If this fails we 706 * know another GPE event has occurred while handling the 707 * current GPE event and need to loop. 708 */ 709 } while (!atomic_cmpset_int(&sc->ec_sci_pend, pending, 0)); 710} 711 712/* 713 * The GPE handler is called when IBE/OBF or SCI events occur. We are 714 * called from an unknown lock context. 715 */ 716static UINT32 717EcGpeHandler(ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context) 718{ 719 struct acpi_ec_softc *sc = Context; 720 ACPI_STATUS Status; 721 EC_STATUS EcStatus; 722 723 KASSERT(Context != NULL, ("EcGpeHandler called with NULL")); 724 CTR0(KTR_ACPI, "ec gpe handler start"); 725 726 /* 727 * Notify EcWaitEvent() that the status register is now fresh. If we 728 * didn't do this, it wouldn't be possible to distinguish an old IBE 729 * from a new one, for example when doing a write transaction (writing 730 * address and then data values.) 731 */ 732 atomic_add_int(&sc->ec_gencount, 1); 733 wakeup(sc); 734 735 /* 736 * If the EC_SCI bit of the status register is set, queue a query handler. 737 * It will run the query and _Qxx method later, under the lock. 738 */ 739 EcStatus = EC_GET_CSR(sc); 740 if ((EcStatus & EC_EVENT_SCI) && 741 atomic_fetchadd_int(&sc->ec_sci_pend, 1) == 0) { 742 CTR0(KTR_ACPI, "ec gpe queueing query handler"); 743 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context); 744 if (ACPI_FAILURE(Status)) { 745 printf("EcGpeHandler: queuing GPE query handler failed\n"); 746 atomic_store_rel_int(&sc->ec_sci_pend, 0); 747 } 748 } 749 return (ACPI_REENABLE_GPE); 750} 751 752static ACPI_STATUS 753EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context, 754 void **RegionContext) 755{ 756 757 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 758 759 /* 760 * If deactivating a region, always set the output to NULL. Otherwise, 761 * just pass the context through. 762 */ 763 if (Function == ACPI_REGION_DEACTIVATE) 764 *RegionContext = NULL; 765 else 766 *RegionContext = Context; 767 768 return_ACPI_STATUS (AE_OK); 769} 770 771static ACPI_STATUS 772EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width, 773 UINT64 *Value, void *Context, void *RegionContext) 774{ 775 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 776 ACPI_PHYSICAL_ADDRESS EcAddr; 777 UINT8 *EcData; 778 ACPI_STATUS Status; 779 780 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address); 781 782 if (Function != ACPI_READ && Function != ACPI_WRITE) 783 return_ACPI_STATUS (AE_BAD_PARAMETER); 784 if (Width % 8 != 0 || Value == NULL || Context == NULL) 785 return_ACPI_STATUS (AE_BAD_PARAMETER); 786 if (Address + Width / 8 > 256) 787 return_ACPI_STATUS (AE_BAD_ADDRESS); 788 789 /* 790 * If booting, check if we need to run the query handler. If so, we 791 * we call it directly here since our thread taskq is not active yet. 792 */ 793 if (cold || rebooting || sc->ec_suspending) { 794 if ((EC_GET_CSR(sc) & EC_EVENT_SCI) && 795 atomic_fetchadd_int(&sc->ec_sci_pend, 1) == 0) { 796 CTR0(KTR_ACPI, "ec running gpe handler directly"); 797 EcGpeQueryHandler(sc); 798 } 799 } 800 801 /* Serialize with EcGpeQueryHandler() at transaction granularity. */ 802 Status = EcLock(sc); 803 if (ACPI_FAILURE(Status)) 804 return_ACPI_STATUS (Status); 805 806 /* If we can't start burst mode, continue anyway. */ 807 Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE); 808 if (ACPI_SUCCESS(Status)) { 809 if (EC_GET_DATA(sc) == EC_BURST_ACK) { 810 CTR0(KTR_ACPI, "ec burst enabled"); 811 sc->ec_burstactive = TRUE; 812 } 813 } 814 815 /* Perform the transaction(s), based on Width. */ 816 EcAddr = Address; 817 EcData = (UINT8 *)Value; 818 if (Function == ACPI_READ) 819 *Value = 0; 820 do { 821 switch (Function) { 822 case ACPI_READ: 823 Status = EcRead(sc, EcAddr, EcData); 824 break; 825 case ACPI_WRITE: 826 Status = EcWrite(sc, EcAddr, *EcData); 827 break; 828 } 829 if (ACPI_FAILURE(Status)) 830 break; 831 EcAddr++; 832 EcData++; 833 } while (EcAddr < Address + Width / 8); 834 835 if (sc->ec_burstactive) { 836 sc->ec_burstactive = FALSE; 837 if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE))) 838 CTR0(KTR_ACPI, "ec disabled burst ok"); 839 } 840 841 EcUnlock(sc); 842 return_ACPI_STATUS (Status); 843} 844 845static ACPI_STATUS 846EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count) 847{ 848 static int no_intr = 0; 849 ACPI_STATUS Status; 850 int count, i, need_poll, slp_ival; 851 852 ACPI_SERIAL_ASSERT(ec); 853 Status = AE_NO_HARDWARE_RESPONSE; 854 need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending; 855 856 /* Wait for event by polling or GPE (interrupt). */ 857 if (need_poll) { 858 count = (ec_timeout * 1000) / EC_POLL_DELAY; 859 if (count == 0) 860 count = 1; 861 DELAY(10); 862 for (i = 0; i < count; i++) { 863 Status = EcCheckStatus(sc, "poll", Event); 864 if (ACPI_SUCCESS(Status)) 865 break; 866 DELAY(EC_POLL_DELAY); 867 } 868 } else { 869 slp_ival = hz / 1000; 870 if (slp_ival != 0) { 871 count = ec_timeout; 872 } else { 873 /* hz has less than 1 ms resolution so scale timeout. */ 874 slp_ival = 1; 875 count = ec_timeout / (1000 / hz); 876 } 877 878 /* 879 * Wait for the GPE to signal the status changed, checking the 880 * status register each time we get one. It's possible to get a 881 * GPE for an event we're not interested in here (i.e., SCI for 882 * EC query). 883 */ 884 for (i = 0; i < count; i++) { 885 if (gen_count == sc->ec_gencount) 886 tsleep(sc, 0, "ecgpe", slp_ival); 887 /* 888 * Record new generation count. It's possible the GPE was 889 * just to notify us that a query is needed and we need to 890 * wait for a second GPE to signal the completion of the 891 * event we are actually waiting for. 892 */ 893 Status = EcCheckStatus(sc, "sleep", Event); 894 if (ACPI_SUCCESS(Status)) { 895 if (gen_count == sc->ec_gencount) 896 no_intr++; 897 else 898 no_intr = 0; 899 break; 900 } 901 gen_count = sc->ec_gencount; 902 } 903 904 /* 905 * We finished waiting for the GPE and it never arrived. Try to 906 * read the register once and trust whatever value we got. This is 907 * the best we can do at this point. 908 */ 909 if (ACPI_FAILURE(Status)) 910 Status = EcCheckStatus(sc, "sleep_end", Event); 911 } 912 if (!need_poll && no_intr > 10) { 913 device_printf(sc->ec_dev, 914 "not getting interrupts, switched to polled mode\n"); 915 ec_polled_mode = 1; 916 } 917 if (ACPI_FAILURE(Status)) 918 CTR0(KTR_ACPI, "error: ec wait timed out"); 919 return (Status); 920} 921 922static ACPI_STATUS 923EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd) 924{ 925 ACPI_STATUS status; 926 EC_EVENT event; 927 EC_STATUS ec_status; 928 u_int gen_count; 929 930 ACPI_SERIAL_ASSERT(ec); 931 932 /* Don't use burst mode if user disabled it. */ 933 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE) 934 return (AE_ERROR); 935 936 /* Decide what to wait for based on command type. */ 937 switch (cmd) { 938 case EC_COMMAND_READ: 939 case EC_COMMAND_WRITE: 940 case EC_COMMAND_BURST_DISABLE: 941 event = EC_EVENT_INPUT_BUFFER_EMPTY; 942 break; 943 case EC_COMMAND_QUERY: 944 case EC_COMMAND_BURST_ENABLE: 945 event = EC_EVENT_OUTPUT_BUFFER_FULL; 946 break; 947 default: 948 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd); 949 return (AE_BAD_PARAMETER); 950 } 951 952 /* 953 * Ensure empty input buffer before issuing command. 954 * Use generation count of zero to force a quick check. 955 */ 956 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0); 957 if (ACPI_FAILURE(status)) 958 return (status); 959 960 /* Run the command and wait for the chosen event. */ 961 CTR1(KTR_ACPI, "ec running command %#x", cmd); 962 gen_count = sc->ec_gencount; 963 EC_SET_CSR(sc, cmd); 964 status = EcWaitEvent(sc, event, gen_count); 965 if (ACPI_SUCCESS(status)) { 966 /* If we succeeded, burst flag should now be present. */ 967 if (cmd == EC_COMMAND_BURST_ENABLE) { 968 ec_status = EC_GET_CSR(sc); 969 if ((ec_status & EC_FLAG_BURST_MODE) == 0) 970 status = AE_ERROR; 971 } 972 } else 973 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd); 974 return (status); 975} 976 977static ACPI_STATUS 978EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data) 979{ 980 ACPI_STATUS status; 981 u_int gen_count; 982 int retry; 983 984 ACPI_SERIAL_ASSERT(ec); 985 CTR1(KTR_ACPI, "ec read from %#x", Address); 986 987 for (retry = 0; retry < 2; retry++) { 988 status = EcCommand(sc, EC_COMMAND_READ); 989 if (ACPI_FAILURE(status)) 990 return (status); 991 992 gen_count = sc->ec_gencount; 993 EC_SET_DATA(sc, Address); 994 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count); 995 if (ACPI_SUCCESS(status)) { 996 *Data = EC_GET_DATA(sc); 997 return (AE_OK); 998 } 999 if (ACPI_FAILURE(EcCheckStatus(sc, "retr_check", 1000 EC_EVENT_INPUT_BUFFER_EMPTY))) 1001 break; 1002 } 1003 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n"); 1004 return (status); 1005} 1006 1007static ACPI_STATUS 1008EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data) 1009{ 1010 ACPI_STATUS status; 1011 u_int gen_count; 1012 1013 ACPI_SERIAL_ASSERT(ec); 1014 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, Data); 1015 1016 status = EcCommand(sc, EC_COMMAND_WRITE); 1017 if (ACPI_FAILURE(status)) 1018 return (status); 1019 1020 gen_count = sc->ec_gencount; 1021 EC_SET_DATA(sc, Address); 1022 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 1023 if (ACPI_FAILURE(status)) { 1024 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n"); 1025 return (status); 1026 } 1027 1028 gen_count = sc->ec_gencount; 1029 EC_SET_DATA(sc, Data); 1030 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 1031 if (ACPI_FAILURE(status)) { 1032 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n"); 1033 return (status); 1034 } 1035 1036 return (AE_OK); 1037} 1038