1# 2# On the handling of kernel options 3# 4# All kernel options should be listed in NOTES, with suitable 5# descriptions. Negative options (options that make some code not 6# compile) should be commented out; LINT (generated from NOTES) should 7# compile as much code as possible. Try to structure option-using 8# code so that a single option only switch code on, or only switch 9# code off, to make it possible to have a full compile-test. If 10# necessary, you can check for COMPILING_LINT to get maximum code 11# coverage. 12# 13# All new options shall also be listed in either "conf/options" or 14# "conf/options.<machine>". Options that affect a single source-file 15# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 16# that affect multiple files should either go in "opt_global.h" if 17# this is a kernel-wide option (used just about everywhere), or in 18# "opt_<option-name-in-lower-case>.h" if it affects only some files. 19# Note that the effect of listing only an option without a 20# header-file-name in conf/options (and cousins) is that the last 21# convention is followed. 22# 23# This handling scheme is not yet fully implemented. 24# 25# 26# Format of this file: 27# Option name filename 28# 29# If filename is missing, the default is 30# opt_<name-of-option-in-lower-case>.h 31 32AAC_DEBUG opt_aac.h 33AACRAID_DEBUG opt_aacraid.h 34AHC_ALLOW_MEMIO opt_aic7xxx.h 35AHC_TMODE_ENABLE opt_aic7xxx.h 36AHC_DUMP_EEPROM opt_aic7xxx.h 37AHC_DEBUG opt_aic7xxx.h 38AHC_DEBUG_OPTS opt_aic7xxx.h 39AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40AHD_DEBUG opt_aic79xx.h 41AHD_DEBUG_OPTS opt_aic79xx.h 42AHD_TMODE_ENABLE opt_aic79xx.h 43AHD_REG_PRETTY_PRINT opt_aic79xx.h 44 45# Debugging options. 46ALT_BREAK_TO_DEBUGGER opt_kdb.h 47BREAK_TO_DEBUGGER opt_kdb.h 48BUF_TRACKING opt_global.h 49DDB 50DDB_BUFR_SIZE opt_ddb.h 51DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 52DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 53DDB_CTF opt_ddb.h 54DDB_NUMSYM opt_ddb.h 55EARLY_PRINTF opt_global.h 56FULL_BUF_TRACKING opt_global.h 57GDB 58KDB opt_global.h 59KDB_TRACE opt_kdb.h 60KDB_UNATTENDED opt_kdb.h 61KLD_DEBUG opt_kld.h 62NUM_CORE_FILES opt_global.h 63QUEUE_MACRO_DEBUG_TRACE opt_global.h 64QUEUE_MACRO_DEBUG_TRASH opt_global.h 65SYSCTL_DEBUG opt_sysctl.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68TSLOG opt_global.h 69TSLOG_PAGEZERO opt_global.h 70TSLOGSIZE opt_global.h 71 72# Miscellaneous options. 73ALQ 74ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 75ATSE_CFI_HACK opt_cfi.h 76AUDIT opt_global.h 77BOOTHOWTO opt_global.h 78BOOTVERBOSE opt_global.h 79CALLOUT_PROFILING 80CAPABILITIES opt_capsicum.h 81CAPABILITY_MODE opt_capsicum.h 82CC_CDG opt_global.h 83CC_CHD opt_global.h 84CC_CUBIC opt_global.h 85CC_DEFAULT opt_cc.h 86CC_DCTCP opt_global.h 87CC_HD opt_global.h 88CC_HTCP opt_global.h 89CC_NEWRENO opt_global.h 90CC_VEGAS opt_global.h 91COMPAT_43 opt_global.h 92COMPAT_43TTY opt_global.h 93COMPAT_FREEBSD4 opt_global.h 94COMPAT_FREEBSD5 opt_global.h 95COMPAT_FREEBSD6 opt_global.h 96COMPAT_FREEBSD7 opt_global.h 97COMPAT_FREEBSD9 opt_global.h 98COMPAT_FREEBSD10 opt_global.h 99COMPAT_FREEBSD11 opt_global.h 100COMPAT_FREEBSD12 opt_global.h 101COMPAT_FREEBSD13 opt_global.h 102COMPAT_FREEBSD14 opt_global.h 103COMPAT_LINUXKPI opt_dontuse.h 104COMPILING_LINT opt_global.h 105CY_PCI_FASTINTR 106DEADLKRES opt_watchdog.h 107EXPERIMENTAL opt_global.h 108DIRECTIO 109FILEMON opt_dontuse.h 110FFCLOCK 111FULL_PREEMPTION opt_sched.h 112GZIO opt_gzio.h 113IMGACT_BINMISC opt_dontuse.h 114IPI_PREEMPTION opt_sched.h 115GEOM_BDE opt_geom.h 116GEOM_CACHE opt_geom.h 117GEOM_CONCAT opt_geom.h 118GEOM_ELI opt_geom.h 119GEOM_GATE opt_geom.h 120GEOM_JOURNAL opt_geom.h 121GEOM_LABEL opt_geom.h 122GEOM_LABEL_GPT opt_geom.h 123GEOM_LINUX_LVM opt_geom.h 124GEOM_MAP opt_geom.h 125GEOM_MIRROR opt_geom.h 126GEOM_MOUNTVER opt_geom.h 127GEOM_MULTIPATH opt_geom.h 128GEOM_NOP opt_geom.h 129GEOM_PART_APM opt_geom.h 130GEOM_PART_BSD opt_geom.h 131GEOM_PART_BSD64 opt_geom.h 132GEOM_PART_EBR opt_geom.h 133GEOM_PART_GPT opt_geom.h 134GEOM_PART_LDM opt_geom.h 135GEOM_PART_MBR opt_geom.h 136GEOM_RAID opt_geom.h 137GEOM_RAID3 opt_geom.h 138GEOM_SHSEC opt_geom.h 139GEOM_STRIPE opt_geom.h 140GEOM_UZIP opt_geom.h 141GEOM_UZIP_DEBUG opt_geom.h 142GEOM_VINUM opt_geom.h 143GEOM_VIRSTOR opt_geom.h 144GEOM_ZERO opt_geom.h 145IFLIB opt_iflib.h 146KDTRACE_HOOKS opt_global.h 147KDTRACE_FRAME opt_kdtrace.h 148KDTRACE_NO_MIB_SDT opt_global.h 149KN_HASHSIZE opt_kqueue.h 150KSTACK_MAX_PAGES 151KSTACK_PAGES 152KSTACK_USAGE_PROF 153KTRACE 154KTRACE_REQUEST_POOL opt_ktrace.h 155LIBICONV 156MAC opt_global.h 157MAC_BIBA opt_dontuse.h 158MAC_BSDEXTENDED opt_dontuse.h 159MAC_DDB opt_dontuse.h 160MAC_DEBUG opt_mac.h 161MAC_IFOFF opt_dontuse.h 162MAC_IPACL opt_dontuse.h 163MAC_LOMAC opt_dontuse.h 164MAC_MLS opt_dontuse.h 165MAC_NONE opt_dontuse.h 166MAC_NTPD opt_dontuse.h 167MAC_PARTITION opt_dontuse.h 168MAC_PORTACL opt_dontuse.h 169MAC_PRIORITY opt_dontuse.h 170MAC_SEEOTHERUIDS opt_dontuse.h 171MAC_STATIC opt_mac.h 172MAC_STUB opt_dontuse.h 173MAC_TEST opt_dontuse.h 174MAC_GRANTBYLABEL opt_dontuse.h 175MAC_VERIEXEC opt_dontuse.h 176MAC_VERIEXEC_DEBUG opt_mac.h 177MAC_VERIEXEC_SHA1 opt_dontuse.h 178MAC_VERIEXEC_SHA256 opt_dontuse.h 179MAC_VERIEXEC_SHA384 opt_dontuse.h 180MAC_VERIEXEC_SHA512 opt_dontuse.h 181MD_ROOT opt_md.h 182MD_ROOT_FSTYPE opt_md.h 183MD_ROOT_READONLY opt_md.h 184MD_ROOT_SIZE opt_md.h 185MD_ROOT_MEM opt_md.h 186MFI_DEBUG opt_mfi.h 187MFI_DECODE_LOG opt_mfi.h 188MPROF_BUFFERS opt_mprof.h 189MPROF_HASH_SIZE opt_mprof.h 190NEW_PCIB opt_global.h 191NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 192NO_ADAPTIVE_RWLOCKS 193NO_ADAPTIVE_SX 194NO_OBSOLETE_CODE opt_global.h 195NO_SYSCTL_DESCR opt_global.h 196NSWBUF_MIN opt_param.h 197MBUF_PACKET_ZONE_DISABLE opt_global.h 198PANIC_REBOOT_WAIT_TIME opt_panic.h 199PCI_HP opt_pci.h 200PCI_IOV opt_global.h 201PPC_DEBUG opt_ppc.h 202PPC_PROBE_CHIPSET opt_ppc.h 203PPS_SYNC opt_ntp.h 204PREEMPTION opt_sched.h 205QUOTA 206SCHED_4BSD opt_sched.h 207SCHED_STATS opt_sched.h 208SCHED_ULE opt_sched.h 209SLEEPQUEUE_PROFILING 210SLHCI_DEBUG opt_slhci.h 211SOCKET_HHOOK opt_global.h 212STACK opt_stack.h 213SUIDDIR 214MSGMNB opt_sysvipc.h 215MSGMNI opt_sysvipc.h 216MSGSEG opt_sysvipc.h 217MSGSSZ opt_sysvipc.h 218MSGTQL opt_sysvipc.h 219SEMMNI opt_sysvipc.h 220SEMMNS opt_sysvipc.h 221SEMMNU opt_sysvipc.h 222SEMMSL opt_sysvipc.h 223SEMOPM opt_sysvipc.h 224SEMUME opt_sysvipc.h 225SHMALL opt_sysvipc.h 226SHMMAX opt_sysvipc.h 227SHMMAXPGS opt_sysvipc.h 228SHMMIN opt_sysvipc.h 229SHMMNI opt_sysvipc.h 230SHMSEG opt_sysvipc.h 231SYSVMSG opt_sysvipc.h 232SYSVSEM opt_sysvipc.h 233SYSVSHM opt_sysvipc.h 234SW_WATCHDOG opt_watchdog.h 235TCPHPTS 236TCP_REQUEST_TRK opt_global.h 237TCP_ACCOUNTING opt_global.h 238TCP_BBR opt_inet.h 239TCP_RACK opt_inet.h 240# 241# TCP SaD Detection is an experimental Sack attack Detection (SaD) 242# algorithm that uses "normal" behaviour with SACK's to detect 243# a possible attack. It is strictly experimental at this point. 244# 245TCP_SAD_DETECTION opt_inet.h 246TURNSTILE_PROFILING 247UMTX_PROFILING 248UMTX_CHAINS opt_global.h 249VERBOSE_SYSINIT 250ZSTDIO opt_zstdio.h 251 252# Sanitizers 253COVERAGE opt_global.h 254KASAN opt_global.h 255KCOV 256KCSAN opt_global.h 257KMSAN opt_global.h 258KUBSAN opt_global.h 259 260# POSIX kernel options 261P1003_1B_MQUEUE opt_posix.h 262P1003_1B_SEMAPHORES opt_posix.h 263_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 264 265# Do we want the config file compiled into the kernel? 266INCLUDE_CONFIG_FILE opt_config.h 267 268# Options for static filesystems. These should only be used at config 269# time, since the corresponding lkms cannot work if there are any static 270# dependencies. Unusability is enforced by hiding the defines for the 271# options in a never-included header. 272AUTOFS opt_dontuse.h 273CD9660 opt_dontuse.h 274EXT2FS opt_dontuse.h 275FDESCFS opt_dontuse.h 276FFS opt_dontuse.h 277FUSEFS opt_dontuse.h 278MSDOSFS opt_dontuse.h 279NULLFS opt_dontuse.h 280PROCFS opt_dontuse.h 281PSEUDOFS opt_dontuse.h 282SMBFS opt_dontuse.h 283TARFS opt_dontuse.h 284TMPFS opt_dontuse.h 285UDF opt_dontuse.h 286UNIONFS opt_dontuse.h 287ZFS opt_dontuse.h 288 289# Pseudofs debugging 290PSEUDOFS_TRACE opt_pseudofs.h 291 292# Tarfs debugging 293TARFS_DEBUG opt_tarfs.h 294 295# In-kernel GSS-API 296KGSSAPI opt_kgssapi.h 297KGSSAPI_DEBUG opt_kgssapi.h 298 299# These static filesystems have one slightly bogus static dependency in 300# sys/i386/i386/autoconf.c. If any of these filesystems are 301# statically compiled into the kernel, code for mounting them as root 302# filesystems will be enabled - but look below. 303# NFSCL - client 304# NFSD - server 305NFSCL opt_nfs.h 306NFSD opt_nfs.h 307 308# filesystems and libiconv bridge 309CD9660_ICONV opt_dontuse.h 310MSDOSFS_ICONV opt_dontuse.h 311UDF_ICONV opt_dontuse.h 312 313# If you are following the conditions in the copyright, 314# you can enable soft-updates which will speed up a lot of thigs 315# and make the system safer from crashes at the same time. 316# otherwise a STUB module will be compiled in. 317SOFTUPDATES opt_ffs.h 318 319# On small, embedded systems, it can be useful to turn off support for 320# snapshots. It saves about 30-40k for a feature that would be lightly 321# used, if it is used at all. 322NO_FFS_SNAPSHOT opt_ffs.h 323 324# Enabling this option turns on support for Access Control Lists in UFS, 325# which can be used to support high security configurations. Depends on 326# UFS_EXTATTR. 327UFS_ACL opt_ufs.h 328 329# Enabling this option turns on support for extended attributes in UFS-based 330# filesystems, which can be used to support high security configurations 331# as well as new filesystem features. 332UFS_EXTATTR opt_ufs.h 333UFS_EXTATTR_AUTOSTART opt_ufs.h 334 335# Enable fast hash lookups for large directories on UFS-based filesystems. 336UFS_DIRHASH opt_ufs.h 337 338# Enable gjournal-based UFS journal. 339UFS_GJOURNAL opt_ufs.h 340 341# The below sentence is not in English, and neither is this one. 342# We plan to remove the static dependences above, with a 343# <filesystem>_ROOT option to control if it usable as root. This list 344# allows these options to be present in config files already (though 345# they won't make any difference yet). 346NFS_ROOT opt_nfsroot.h 347 348# SMB/CIFS requester 349NETSMB opt_netsmb.h 350 351# Enable debugnet(4) networking support. 352DEBUGNET opt_global.h 353# Enable netdump(4) client support. 354NETDUMP opt_global.h 355# Enable netgdb(4) support. 356NETGDB opt_global.h 357 358# Options used only in subr_param.c. 359HZ opt_param.h 360MAXFILES opt_param.h 361NBUF opt_param.h 362NSFBUFS opt_param.h 363VM_BCACHE_SIZE_MAX opt_param.h 364VM_SWZONE_SIZE_MAX opt_param.h 365MAXUSERS 366DFLDSIZ opt_param.h 367MAXDSIZ opt_param.h 368MAXSSIZ opt_param.h 369 370# Generic SCSI options. 371CAM_MAX_HIGHPOWER opt_cam.h 372CAMDEBUG opt_cam.h 373CAM_DEBUG_COMPILE opt_cam.h 374CAM_DEBUG_DELAY opt_cam.h 375CAM_DEBUG_BUS opt_cam.h 376CAM_DEBUG_TARGET opt_cam.h 377CAM_DEBUG_LUN opt_cam.h 378CAM_DEBUG_FLAGS opt_cam.h 379CAM_BOOT_DELAY opt_cam.h 380CAM_IOSCHED_DYNAMIC opt_cam.h 381CAM_IO_STATS opt_cam.h 382CAM_TEST_FAILURE opt_cam.h 383SCSI_DELAY opt_scsi.h 384SCSI_NO_SENSE_STRINGS opt_scsi.h 385SCSI_NO_OP_STRINGS opt_scsi.h 386 387# Options used only in cam/ata/ata_da.c 388ATA_STATIC_ID opt_ada.h 389 390# Options used only in cam/scsi/scsi_cd.c 391CHANGER_MIN_BUSY_SECONDS opt_cd.h 392CHANGER_MAX_BUSY_SECONDS opt_cd.h 393 394# Options used only in cam/scsi/scsi_da.c 395DA_TRACK_REFS opt_da.h 396 397# Options used only in cam/scsi/scsi_sa.c. 398SA_IO_TIMEOUT opt_sa.h 399SA_SPACE_TIMEOUT opt_sa.h 400SA_REWIND_TIMEOUT opt_sa.h 401SA_ERASE_TIMEOUT opt_sa.h 402SA_1FM_AT_EOD opt_sa.h 403 404# Options used only in cam/scsi/scsi_pt.c 405SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 406 407# Options used only in cam/scsi/scsi_ses.c 408SES_ENABLE_PASSTHROUGH opt_ses.h 409 410# Options used in dev/sym/ (Symbios SCSI driver). 411SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 412 # disabled:0 (default), enabled:1 413SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 414 # disabled:0, enabled:1 (default) 415SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 416 # default:8, range:[1..64] 417 418# Options used only in dev/isp/* 419ISP_TARGET_MODE opt_isp.h 420ISP_FW_CRASH_DUMP opt_isp.h 421ISP_DEFAULT_ROLES opt_isp.h 422ISP_INTERNAL_TARGET opt_isp.h 423ISP_FCTAPE_OFF opt_isp.h 424 425# Net stuff. 426ACCEPT_FILTER_DATA 427ACCEPT_FILTER_DNS 428ACCEPT_FILTER_HTTP 429ACCEPT_FILTER_TLS 430ALTQ opt_global.h 431ALTQ_CBQ opt_altq.h 432ALTQ_CDNR opt_altq.h 433ALTQ_CODEL opt_altq.h 434ALTQ_DEBUG opt_altq.h 435ALTQ_HFSC opt_altq.h 436ALTQ_FAIRQ opt_altq.h 437ALTQ_NOPCC opt_altq.h 438ALTQ_PRIQ opt_altq.h 439ALTQ_RED opt_altq.h 440ALTQ_RIO opt_altq.h 441BOOTP opt_bootp.h 442BOOTP_BLOCKSIZE opt_bootp.h 443BOOTP_COMPAT opt_bootp.h 444BOOTP_NFSROOT opt_bootp.h 445BOOTP_NFSV3 opt_bootp.h 446BOOTP_WIRED_TO opt_bootp.h 447DEVICE_POLLING 448DUMMYNET opt_ipdn.h 449RATELIMIT opt_ratelimit.h 450RATELIMIT_DEBUG opt_ratelimit.h 451INET opt_inet.h 452INET6 opt_inet6.h 453STATS opt_global.h 454IPDIVERT 455IPFILTER opt_ipfilter.h 456IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 457IPFILTER_LOG opt_ipfilter.h 458IPFILTER_LOOKUP opt_ipfilter.h 459IPFIREWALL opt_ipfw.h 460IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 461IPFIREWALL_NAT opt_ipfw.h 462IPFIREWALL_NAT64 opt_ipfw.h 463IPFIREWALL_NPTV6 opt_ipfw.h 464IPFIREWALL_VERBOSE opt_ipfw.h 465IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 466IPFIREWALL_PMOD opt_ipfw.h 467IPSEC opt_ipsec.h 468IPSEC_DEBUG opt_ipsec.h 469IPSEC_SUPPORT opt_ipsec.h 470IPSTEALTH 471KERN_TLS 472KRPC 473LIBALIAS 474LIBMCHAIN 475MBUF_PROFILING 476MBUF_STRESS_TEST 477MROUTING opt_mrouting.h 478NFSLOCKD 479NETLINK opt_global.h 480PF_DEFAULT_TO_DROP opt_pf.h 481ROUTE_MPATH opt_route.h 482ROUTETABLES opt_route.h 483FIB_ALGO opt_route.h 484RSS opt_rss.h 485SLIP_IFF_OPTS opt_slip.h 486TCPPCAP opt_global.h 487SIFTR 488TCP_BLACKBOX opt_global.h 489TCP_HHOOK opt_global.h 490TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 491TCP_RFC7413 opt_inet.h 492TCP_RFC7413_MAX_KEYS opt_inet.h 493TCP_RFC7413_MAX_PSKS opt_inet.h 494TCP_SIGNATURE opt_ipsec.h 495VLAN_ARRAY opt_vlan.h 496XDR 497XBONEHACK 498 499# 500# SCTP 501# 502SCTP opt_sctp.h 503SCTP_SUPPORT opt_sctp.h 504SCTP_DEBUG opt_sctp.h # Enable debug printfs 505SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 506SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 507SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 508SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 509SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 510SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 511SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 512SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 513SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 514SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 515# 516# 517# 518 519# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 520# Each netgraph node type can be either be compiled into the kernel 521# or loaded dynamically. To get the former, include the corresponding 522# option below. Each type has its own man page, e.g. ng_async(4). 523NETGRAPH 524NETGRAPH_DEBUG opt_netgraph.h 525NETGRAPH_ASYNC opt_netgraph.h 526NETGRAPH_BLUETOOTH opt_netgraph.h 527NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 528NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 529NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 530NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 531NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 532NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 533NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 534NETGRAPH_BPF opt_netgraph.h 535NETGRAPH_BRIDGE opt_netgraph.h 536NETGRAPH_CAR opt_netgraph.h 537NETGRAPH_CHECKSUM opt_netgraph.h 538NETGRAPH_CISCO opt_netgraph.h 539NETGRAPH_DEFLATE opt_netgraph.h 540NETGRAPH_DEVICE opt_netgraph.h 541NETGRAPH_ECHO opt_netgraph.h 542NETGRAPH_EIFACE opt_netgraph.h 543NETGRAPH_ETHER opt_netgraph.h 544NETGRAPH_ETHER_ECHO opt_netgraph.h 545NETGRAPH_FEC opt_netgraph.h 546NETGRAPH_FRAME_RELAY opt_netgraph.h 547NETGRAPH_GIF opt_netgraph.h 548NETGRAPH_GIF_DEMUX opt_netgraph.h 549NETGRAPH_HOLE opt_netgraph.h 550NETGRAPH_IFACE opt_netgraph.h 551NETGRAPH_IP_INPUT opt_netgraph.h 552NETGRAPH_IPFW opt_netgraph.h 553NETGRAPH_KSOCKET opt_netgraph.h 554NETGRAPH_L2TP opt_netgraph.h 555NETGRAPH_LMI opt_netgraph.h 556NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 557NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 558NETGRAPH_NAT opt_netgraph.h 559NETGRAPH_NETFLOW opt_netgraph.h 560NETGRAPH_ONE2MANY opt_netgraph.h 561NETGRAPH_PATCH opt_netgraph.h 562NETGRAPH_PIPE opt_netgraph.h 563NETGRAPH_PPP opt_netgraph.h 564NETGRAPH_PPPOE opt_netgraph.h 565NETGRAPH_PPTPGRE opt_netgraph.h 566NETGRAPH_PRED1 opt_netgraph.h 567NETGRAPH_RFC1490 opt_netgraph.h 568NETGRAPH_SOCKET opt_netgraph.h 569NETGRAPH_SPLIT opt_netgraph.h 570NETGRAPH_SPPP opt_netgraph.h 571NETGRAPH_TAG opt_netgraph.h 572NETGRAPH_TCPMSS opt_netgraph.h 573NETGRAPH_TEE opt_netgraph.h 574NETGRAPH_TTY opt_netgraph.h 575NETGRAPH_UI opt_netgraph.h 576NETGRAPH_VJC opt_netgraph.h 577NETGRAPH_VLAN opt_netgraph.h 578 579# DRM options 580DRM_DEBUG opt_drm.h 581 582TI_SF_BUF_JUMBO opt_ti.h 583TI_JUMBO_HDRSPLIT opt_ti.h 584 585# Misc debug flags. Most of these should probably be replaced with 586# 'DEBUG', and then let people recompile just the interesting modules 587# with 'make CC="cc -DDEBUG"'. 588DEBUG_1284 opt_ppb_1284.h 589LPT_DEBUG opt_lpt.h 590PLIP_DEBUG opt_plip.h 591LOCKF_DEBUG opt_debug_lockf.h 592SI_DEBUG opt_debug_si.h 593IFMEDIA_DEBUG opt_ifmedia.h 594 595# Fb options 596FB_DEBUG opt_fb.h 597 598# ppbus related options 599PERIPH_1284 opt_ppb_1284.h 600DONTPROBE_1284 opt_ppb_1284.h 601 602# smbus related options 603ENABLE_ALART opt_intpm.h 604 605# These cause changes all over the kernel 606BLKDEV_IOSIZE opt_global.h 607BURN_BRIDGES opt_global.h 608DEBUG opt_global.h 609DEBUG_LOCKS opt_global.h 610DEBUG_VFS_LOCKS opt_global.h 611DFLTPHYS opt_global.h 612DIAGNOSTIC opt_global.h 613INVARIANT_SUPPORT opt_global.h 614INVARIANTS opt_global.h 615KASSERT_PANIC_OPTIONAL opt_global.h 616MAXCPU opt_global.h 617MAXMEMDOM opt_global.h 618MAXPHYS opt_maxphys.h 619MCLSHIFT opt_global.h 620MUTEX_NOINLINE opt_global.h 621LOCK_PROFILING opt_global.h 622MSIZE opt_global.h 623REGRESSION opt_global.h 624RWLOCK_NOINLINE opt_global.h 625SX_NOINLINE opt_global.h 626VFS_BIO_DEBUG opt_global.h 627 628# These are VM related options 629VM_KMEM_SIZE opt_vm.h 630VM_KMEM_SIZE_SCALE opt_vm.h 631VM_KMEM_SIZE_MAX opt_vm.h 632VM_NRESERVLEVEL opt_vm.h 633VM_LEVEL_0_ORDER opt_vm.h 634NO_SWAPPING opt_vm.h 635MALLOC_MAKE_FAILURES opt_vm.h 636MALLOC_PROFILE opt_vm.h 637MALLOC_DEBUG_MAXZONES opt_vm.h 638 639# The MemGuard replacement allocator used for tamper-after-free detection 640DEBUG_MEMGUARD opt_vm.h 641 642# The RedZone malloc(9) protection 643DEBUG_REDZONE opt_vm.h 644 645# Standard SMP options 646EARLY_AP_STARTUP opt_global.h 647SMP opt_global.h 648NUMA opt_global.h 649 650# Size of the kernel message buffer 651MSGBUF_SIZE opt_msgbuf.h 652 653# NFS options 654NFS_MINATTRTIMO opt_nfs.h 655NFS_MAXATTRTIMO opt_nfs.h 656NFS_MINDIRATTRTIMO opt_nfs.h 657NFS_MAXDIRATTRTIMO opt_nfs.h 658NFS_DEBUG opt_nfs.h 659 660# TMPFS options 661TMPFS_PAGES_MINRESERVED opt_tmpfs.h 662 663# Options for uart(4) 664UART_PPS_ON_CTS opt_uart.h 665UART_POLL_FREQ opt_uart.h 666UART_DEV_TOLERANCE_PCT opt_uart.h 667 668# options for bus/device framework 669BUS_DEBUG opt_bus.h 670 671# options for USB support 672USB_DEBUG opt_usb.h 673USB_HOST_ALIGN opt_usb.h 674USB_REQ_DEBUG opt_usb.h 675USB_TEMPLATE opt_usb.h 676USB_VERBOSE opt_usb.h 677USB_DMA_SINGLE_ALLOC opt_usb.h 678USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 679U3G_DEBUG opt_u3g.h 680UKBD_DFLT_KEYMAP opt_ukbd.h 681UPLCOM_INTR_INTERVAL opt_uplcom.h 682UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 683UVSCOM_INTR_INTERVAL opt_uvscom.h 684 685# options for the Realtek rtwn driver 686RTWN_DEBUG opt_rtwn.h 687RTWN_WITHOUT_UCODE opt_rtwn.h 688 689# Embedded system options 690INIT_PATH 691 692ROOTDEVNAME 693 694FDC_DEBUG opt_fdc.h 695PCFCLOCK_VERBOSE opt_pcfclock.h 696PCFCLOCK_MAX_RETRIES opt_pcfclock.h 697 698KTR opt_global.h 699KTR_ALQ opt_ktr.h 700KTR_MASK opt_ktr.h 701KTR_CPUMASK opt_ktr.h 702KTR_COMPILE opt_global.h 703KTR_BOOT_ENTRIES opt_global.h 704KTR_ENTRIES opt_global.h 705KTR_VERBOSE opt_ktr.h 706WITNESS opt_global.h 707WITNESS_KDB opt_witness.h 708WITNESS_NO_VNODE opt_witness.h 709WITNESS_SKIPSPIN opt_witness.h 710WITNESS_COUNT opt_witness.h 711OPENSOLARIS_WITNESS opt_global.h 712 713EPOCH_TRACE opt_global.h 714 715# options for ACPI support 716ACPI_DEBUG opt_acpi.h 717ACPI_MAX_TASKS opt_acpi.h 718ACPI_MAX_THREADS opt_acpi.h 719DEV_ACPI opt_acpi.h 720ACPI_EARLY_EPYC_WAR opt_acpi.h 721 722# options for IOMMU support 723IOMMU opt_iommu.h 724 725# ISA support 726DEV_ISA opt_isa.h 727ISAPNP opt_dontuse.h 728 729# various 'device presence' options. 730DEV_BPF opt_bpf.h 731DEV_CARP opt_carp.h 732DEV_NETMAP opt_global.h 733DEV_PCI opt_pci.h 734DEV_PF opt_pf.h 735DEV_PFLOG opt_pf.h 736DEV_PFSYNC opt_pf.h 737DEV_SPLASH opt_splash.h 738DEV_VLAN opt_vlan.h 739 740# bce driver 741BCE_DEBUG opt_bce.h 742BCE_NVRAM_WRITE_SUPPORT opt_bce.h 743 744SOCKBUF_DEBUG opt_global.h 745 746 747# options for hifn driver 748HIFN_DEBUG opt_hifn.h 749HIFN_RNDTEST opt_hifn.h 750 751# options for safenet driver 752SAFE_DEBUG opt_safe.h 753SAFE_NO_RNG opt_safe.h 754SAFE_RNDTEST opt_safe.h 755 756# syscons/vt options 757MAXCONS opt_syscons.h 758SC_ALT_MOUSE_IMAGE opt_syscons.h 759SC_CUT_SPACES2TABS opt_syscons.h 760SC_CUT_SEPCHARS opt_syscons.h 761SC_DEBUG_LEVEL opt_syscons.h 762SC_DFLT_FONT opt_syscons.h 763SC_DFLT_TERM opt_syscons.h 764SC_DISABLE_KDBKEY opt_syscons.h 765SC_DISABLE_REBOOT opt_syscons.h 766SC_HISTORY_SIZE opt_syscons.h 767SC_KERNEL_CONS_ATTR opt_syscons.h 768SC_KERNEL_CONS_ATTRS opt_syscons.h 769SC_KERNEL_CONS_REV_ATTR opt_syscons.h 770SC_MOUSE_CHAR opt_syscons.h 771SC_NO_CUTPASTE opt_syscons.h 772SC_NO_FONT_LOADING opt_syscons.h 773SC_NO_HISTORY opt_syscons.h 774SC_NO_MODE_CHANGE opt_syscons.h 775SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 776SC_NO_SYSMOUSE opt_syscons.h 777SC_NO_TERM_DUMB opt_syscons.h 778SC_NO_TERM_SC opt_syscons.h 779SC_NO_TERM_TEKEN opt_syscons.h 780SC_NORM_ATTR opt_syscons.h 781SC_NORM_REV_ATTR opt_syscons.h 782SC_PIXEL_MODE opt_syscons.h 783SC_RENDER_DEBUG opt_syscons.h 784SC_TWOBUTTON_MOUSE opt_syscons.h 785VT_ALT_TO_ESC_HACK opt_syscons.h 786VT_FB_MAX_WIDTH opt_syscons.h 787VT_FB_MAX_HEIGHT opt_syscons.h 788VT_MAXWINDOWS opt_syscons.h 789VT_TWOBUTTON_MOUSE opt_syscons.h 790DEV_SC opt_syscons.h 791DEV_VT opt_syscons.h 792 793# teken terminal emulator options 794TEKEN_CONS25 opt_teken.h 795TEKEN_UTF8 opt_teken.h 796TERMINAL_KERN_ATTR opt_teken.h 797TERMINAL_NORM_ATTR opt_teken.h 798 799# options for printf 800PRINTF_BUFR_SIZE opt_printf.h 801BOOT_TAG opt_printf.h 802BOOT_TAG_SZ opt_printf.h 803 804# kbd options 805KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 806KBD_INSTALL_CDEV opt_kbd.h 807KBD_MAXRETRY opt_kbd.h 808KBD_MAXWAIT opt_kbd.h 809KBD_RESETDELAY opt_kbd.h 810KBD_DELAY1 opt_kbd.h 811KBD_DELAY2 opt_kbd.h 812KBDIO_DEBUG opt_kbd.h 813KBDMUX_DFLT_KEYMAP opt_kbdmux.h 814 815# options for the Atheros driver 816ATH_DEBUG opt_ath.h 817ATH_TXBUF opt_ath.h 818ATH_RXBUF opt_ath.h 819ATH_DIAGAPI opt_ath.h 820ATH_TX99_DIAG opt_ath.h 821ATH_ENABLE_DFS opt_ath.h 822ATH_EEPROM_FIRMWARE opt_ath.h 823ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 824ATH_DEBUG_ALQ opt_ath.h 825ATH_KTR_INTR_DEBUG opt_ath.h 826 827AH_DEBUG opt_ah.h 828AH_ASSERT opt_ah.h 829AH_DEBUG_ALQ opt_ah.h 830AH_REGOPS_FUNC opt_ah.h 831AH_WRITE_REGDOMAIN opt_ah.h 832AH_DEBUG_COUNTRY opt_ah.h 833AH_WRITE_EEPROM opt_ah.h 834AH_PRIVATE_DIAG opt_ah.h 835AH_NEED_DESC_SWAP opt_ah.h 836AH_USE_INIPDGAIN opt_ah.h 837AH_MAXCHAN opt_ah.h 838AH_RXCFG_SDMAMW_4BYTES opt_ah.h 839AH_INTERRUPT_DEBUGGING opt_ah.h 840# AR5416 and later interrupt mitigation 841# XXX do not use this for AR9130 842AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 843 844# options for the Altera mSGDMA driver (altera_msgdma) 845ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 846ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 847ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 848ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 849 850# options for the Broadcom BCM43xx driver (bwi) 851BWI_DEBUG opt_bwi.h 852BWI_DEBUG_VERBOSE opt_bwi.h 853 854# options for the Brodacom BCM43xx driver (bwn) 855BWN_DEBUG opt_bwn.h 856BWN_GPL_PHY opt_bwn.h 857BWN_USE_SIBA opt_bwn.h 858 859# Options for the SIBA driver 860SIBA_DEBUG opt_siba.h 861 862# options for the Marvell 8335 wireless driver 863MALO_DEBUG opt_malo.h 864MALO_TXBUF opt_malo.h 865MALO_RXBUF opt_malo.h 866 867# options for the Marvell wireless driver 868MWL_DEBUG opt_mwl.h 869MWL_TXBUF opt_mwl.h 870MWL_RXBUF opt_mwl.h 871MWL_DIAGAPI opt_mwl.h 872MWL_AGGR_SIZE opt_mwl.h 873MWL_TX_NODROP opt_mwl.h 874 875# Options for the Marvell NETA driver 876MVNETA_MULTIQUEUE opt_mvneta.h 877MVNETA_KTR opt_mvneta.h 878 879# Options for the Intel 802.11ac wireless driver 880IWM_DEBUG opt_iwm.h 881 882# Options for the Intel 802.11n wireless driver 883IWN_DEBUG opt_iwn.h 884 885# Options for the Intel 3945ABG wireless driver 886WPI_DEBUG opt_wpi.h 887 888# dcons options 889DCONS_BUF_SIZE opt_dcons.h 890DCONS_POLL_HZ opt_dcons.h 891DCONS_FORCE_CONSOLE opt_dcons.h 892DCONS_FORCE_GDB opt_dcons.h 893 894# HWPMC options 895HWPMC_DEBUG opt_global.h 896HWPMC_HOOKS 897 898# 802.11 support layer 899IEEE80211_DEBUG opt_wlan.h 900IEEE80211_DEBUG_REFCNT opt_wlan.h 901IEEE80211_SUPPORT_MESH opt_wlan.h 902IEEE80211_SUPPORT_SUPERG opt_wlan.h 903IEEE80211_SUPPORT_TDMA opt_wlan.h 904IEEE80211_ALQ opt_wlan.h 905IEEE80211_DFS_DEBUG opt_wlan.h 906 907# 802.11 TDMA support 908TDMA_SLOTLEN_DEFAULT opt_tdma.h 909TDMA_SLOTCNT_DEFAULT opt_tdma.h 910TDMA_BINTVAL_DEFAULT opt_tdma.h 911TDMA_TXRATE_11B_DEFAULT opt_tdma.h 912TDMA_TXRATE_11G_DEFAULT opt_tdma.h 913TDMA_TXRATE_11A_DEFAULT opt_tdma.h 914TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 915TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 916TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 917TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 918TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 919 920# VideoMode 921PICKMODE_DEBUG opt_videomode.h 922 923# Network stack virtualization options 924VIMAGE opt_global.h 925VNET_DEBUG opt_global.h 926 927# Common Flash Interface (CFI) options 928CFI_SUPPORT_STRATAFLASH opt_cfi.h 929CFI_ARMEDANDDANGEROUS opt_cfi.h 930CFI_HARDWAREBYTESWAP opt_cfi.h 931 932# Sound options 933SND_DEBUG opt_snd.h 934SND_DIAGNOSTIC opt_snd.h 935SND_FEEDER_MULTIFORMAT opt_snd.h 936SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 937SND_FEEDER_RATE_HP opt_snd.h 938SND_PCM_64 opt_snd.h 939SND_OLDSTEREO opt_snd.h 940 941X86BIOS 942 943# Flattened device tree options 944FDT opt_platform.h 945FDT_DTB_STATIC opt_platform.h 946 947# OFED Infiniband stack 948OFED opt_ofed.h 949OFED_DEBUG_INIT opt_ofed.h 950SDP opt_ofed.h 951SDP_DEBUG opt_ofed.h 952IPOIB opt_ofed.h 953IPOIB_DEBUG opt_ofed.h 954IPOIB_CM opt_ofed.h 955 956# Resource Accounting 957RACCT opt_global.h 958RACCT_DEFAULT_TO_DISABLED opt_global.h 959 960# Resource Limits 961RCTL opt_global.h 962 963# Random number generator(s) 964# Alternative RNG algorithm. 965RANDOM_FENESTRASX opt_global.h 966# With this, no entropy processor is loaded, but the entropy 967# harvesting infrastructure is present. This means an entropy 968# processor may be loaded as a module. 969RANDOM_LOADABLE opt_global.h 970# This turns on high-rate and potentially expensive harvesting in 971# the uma slab allocator. 972RANDOM_ENABLE_UMA opt_global.h 973RANDOM_ENABLE_ETHER opt_global.h 974 975# This options turns TPM into entropy source. 976TPM_HARVEST opt_tpm.h 977 978# BHND(4) driver 979BHND_LOGLEVEL opt_global.h 980 981# GPIO and child devices 982GPIO_SPI_DEBUG opt_gpio.h 983 984# SPI devices 985SPIGEN_LEGACY_CDEVNAME opt_spi.h 986 987# etherswitch(4) driver 988RTL8366_SOFT_RESET opt_etherswitch.h 989 990# evdev protocol support 991EVDEV_SUPPORT opt_evdev.h 992EVDEV_DEBUG opt_evdev.h 993UINPUT_DEBUG opt_evdev.h 994 995# Hyper-V network driver 996HN_DEBUG opt_hn.h 997 998# CAM-based MMC stack 999MMCCAM 1000# Encrypted kernel crash dumps 1001EKCD opt_ekcd.h 1002 1003# NVME options 1004NVME_USE_NVD opt_nvme.h 1005 1006# amdsbwd options 1007AMDSBWD_DEBUG opt_amdsbwd.h 1008 1009# gcov support 1010GCOV opt_global.h 1011LINDEBUGFS 1012 1013# options for HID support 1014HID_DEBUG opt_hid.h 1015IICHID_DEBUG opt_hid.h 1016IICHID_SAMPLING opt_hid.h 1017HKBD_DFLT_KEYMAP opt_hkbd.h 1018HIDRAW_MAKE_UHID_ALIAS opt_hid.h 1019 1020# kenv options 1021# The early kernel environment (loader environment, config(8)-provided static) 1022# is typically cleared after the dynamic environment comes up to ensure that 1023# we're not inadvertently holding on to 'secret' values in these stale envs. 1024# This option is insecure except in controlled environments where the static 1025# environment's contents are known to be safe. 1026PRESERVE_EARLY_KENV opt_global.h 1027