1/*- 2 * Copyright (c) 1996 Jason R. Thorpe <thorpej@and.com> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgements: 15 * This product includes software developed by Jason R. Thorpe 16 * for And Communications, http://www.and.com/ 17 * 4. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 25 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 26 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 27 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 28 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * $FreeBSD$ 33 */ 34 35#ifndef _SYS_CHIO_H_ 36#define _SYS_CHIO_H_ 37 38#ifndef _KERNEL 39#include <sys/types.h> 40#endif 41#include <sys/ioccom.h> 42 43/* 44 * Element types. Used as "to" and "from" type indicators in move 45 * and exchange operations. 46 * 47 * Note that code in sys/scsi/ch.c relies on these values (uses them 48 * as offsets in an array, and other evil), so don't muck with them 49 * unless you know what you're doing. 50 */ 51#define CHET_MT 0 /* medium transport (picker) */ 52#define CHET_ST 1 /* storage transport (slot) */ 53#define CHET_IE 2 /* import/export (portal) */ 54#define CHET_DT 3 /* data transfer (drive) */ 55#define CHET_MAX CHET_DT 56 57/* 58 * Maximum length of a volume identification string 59 */ 60#define CH_VOLTAG_MAXLEN 32 61 62/* 63 * Structure used to execute a MOVE MEDIUM command. 64 */ 65struct changer_move { 66 u_int16_t cm_fromtype; /* element type to move from */ 67 u_int16_t cm_fromunit; /* logical unit of from element */ 68 u_int16_t cm_totype; /* element type to move to */ 69 u_int16_t cm_tounit; /* logical unit of to element */ 70 u_int16_t cm_flags; /* misc. flags */ 71}; 72 73/* cm_flags */ 74#define CM_INVERT 0x01 /* invert media */ 75 76/* 77 * Structure used to execute an EXCHANGE MEDIUM command. In an 78 * exchange operation, the following steps occur: 79 * 80 * - media from source is moved to first destination. 81 * 82 * - media previously occupying first destination is moved 83 * to the second destination. 84 * 85 * The second destination may or may not be the same as the source. 86 * In the case of a simple exchange, the source and second destination 87 * are the same. 88 */ 89struct changer_exchange { 90 u_int16_t ce_srctype; /* element type of source */ 91 u_int16_t ce_srcunit; /* logical unit of source */ 92 u_int16_t ce_fdsttype; /* element type of first destination */ 93 u_int16_t ce_fdstunit; /* logical unit of first destination */ 94 u_int16_t ce_sdsttype; /* element type of second destination */ 95 u_int16_t ce_sdstunit; /* logical unit of second destination */ 96 u_int16_t ce_flags; /* misc. flags */ 97}; 98 99/* ce_flags */ 100#define CE_INVERT1 0x01 /* invert media 1 */ 101#define CE_INVERT2 0x02 /* invert media 2 */ 102 103/* 104 * Structure used to execute a POSITION TO ELEMENT command. This 105 * moves the current picker in front of the specified element. 106 */ 107struct changer_position { 108 u_int16_t cp_type; /* element type */ 109 u_int16_t cp_unit; /* logical unit of element */ 110 u_int16_t cp_flags; /* misc. flags */ 111}; 112 113/* cp_flags */ 114#define CP_INVERT 0x01 /* invert picker */ 115 116/* 117 * Data returned by CHIOGPARAMS. 118 */ 119struct changer_params { 120 u_int16_t cp_npickers; /* number of pickers */ 121 u_int16_t cp_nslots; /* number of slots */ 122 u_int16_t cp_nportals; /* number of import/export portals */ 123 u_int16_t cp_ndrives; /* number of drives */ 124}; 125 126/* 127 * Command used to get element status. 128 */ 129 130struct changer_voltag { 131 u_char cv_volid[CH_VOLTAG_MAXLEN+1]; 132 u_int16_t cv_serial; 133}; 134 135typedef struct changer_voltag changer_voltag_t; 136 137/* 138 * Flags definitions for ces_status 139 * Not all flags have meaning for all element types. 140 */ 141typedef enum { 142 CES_STATUS_FULL = 0x001, /* element is full */ 143 CES_STATUS_IMPEXP = 0x002, /* media deposited by operator */ 144 CES_STATUS_EXCEPT = 0x004, /* element in abnormal state */ 145 CES_PICKER_MASK = 0x005, /* flags valid for pickers */ 146 CES_STATUS_ACCESS = 0x008, /* media accessible by picker */ 147 CES_SLOT_MASK = 0x00c, /* flags valid for slots */ 148 CES_DRIVE_MASK = 0x00c, /* flags valid for drives */ 149 CES_STATUS_EXENAB = 0x010, /* element supports exporting */ 150 CES_STATUS_INENAB = 0x020, /* element supports importing */ 151 CES_PORTAL_MASK = 0x03f, /* flags valid for portals */ 152 CES_INVERT = 0x040, /* invert bit */ 153 CES_SOURCE_VALID = 0x080, /* source address (ces_source) valid */ 154 CES_SCSIID_VALID = 0x100, /* ces_scsi_id is valid */ 155 CES_LUN_VALID = 0x200, /* ces_scsi_lun is valid */ 156 CES_PIV = 0x400 /* ces_protocol_id is valid */ 157} ces_status_flags; 158 159struct changer_element_status { 160 u_int8_t ces_type; /* element type */ 161 u_int16_t ces_addr; /* logical element address */ 162 u_int16_t ces_int_addr; /* changer element address */ 163 ces_status_flags ces_flags; /* 164 * see CESTATUS definitions 165 * below 166 */ 167 u_int8_t ces_sensecode; /* 168 * additional sense 169 * code for element */ 170 u_int8_t ces_sensequal; /* 171 * additional sense 172 * code qualifier 173 */ 174 u_int8_t ces_source_type; /* 175 * element type of 176 * source address 177 */ 178 u_int16_t ces_source_addr; /* 179 * source address of medium 180 */ 181 changer_voltag_t ces_pvoltag; /* primary volume tag */ 182 changer_voltag_t ces_avoltag; /* alternate volume tag */ 183 u_int8_t ces_scsi_id; /* SCSI id of element */ 184 u_int8_t ces_scsi_lun; /* SCSI lun of element */ 185 186 /* 187 * Data members for SMC3 and later versions 188 */ 189 u_int8_t ces_medium_type; 190#define CES_MEDIUM_TYPE_UNKNOWN 0 /* Medium type unspecified */ 191#define CES_MEDIUM_TYPE_DATA 1 /* Data medium */ 192#define CES_MEDIUM_TYPE_CLEANING 2 /* Cleaning medium */ 193#define CES_MEDIUM_TYPE_DIAGNOSTIC 3 /* Diagnostic medium */ 194#define CES_MEDIUM_TYPE_WORM 4 /* WORM medium */ 195#define CES_MEDIUM_TYPE_MICROCODE 5 /* Microcode image medium */ 196 197 u_int8_t ces_protocol_id; 198#define CES_PROTOCOL_ID_FCP_4 0 /* Fiber channel */ 199#define CES_PROTOCOL_ID_SPI_5 1 /* Parallel SCSI */ 200#define CES_PROTOCOL_ID_SSA_S3P 2 /* SSA */ 201#define CES_PROTOCOL_ID_SBP_3 3 /* IEEE 1394 */ 202#define CES_PROTOCOL_ID_SRP 4 /* SCSI Remote DMA */ 203#define CES_PROTOCOL_ID_ISCSI 5 /* iSCSI */ 204#define CES_PROTOCOL_ID_SPL 6 /* SAS */ 205#define CES_PROTOCOL_ID_ADT_2 7 /* Automation/Drive Interface */ 206#define CES_PROTOCOL_ID_ACS_2 8 /* ATA */ 207 208 u_int8_t ces_assoc; 209#define CES_ASSOC_LOGICAL_UNIT 0 210#define CES_ASSOC_TARGET_PORT 1 211#define CES_ASSOC_TARGET_DEVICE 2 212 213 u_int8_t ces_designator_type; 214#define CES_DESIGNATOR_TYPE_VENDOR_SPECIFIC 0 215#define CES_DESIGNATOR_TYPE_T10_VENDOR_ID 1 216#define CES_DESIGNATOR_TYPE_EUI_64 2 217#define CES_DESIGNATOR_TYPE_NAA 3 218#define CES_DESIGNATOR_TYPE_TARGET_PORT_ID 4 219#define CES_DESIGNATOR_TYPE_TARGET_PORT_GRP 5 220#define CES_DESIGNATOR_TYPE_LOGICAL_UNIT_GRP 6 221#define CES_DESIGNATOR_TYPE_MD5_LOGICAL_UNIT_ID 7 222#define CES_DESIGNATOR_TYPE_SCSI_NAME_STRING 8 223 224 u_int8_t ces_code_set; 225#define CES_CODE_SET_RESERVED 0 226#define CES_CODE_SET_BINARY 1 227#define CES_CODE_SET_ASCII 2 228#define CES_CODE_SET_UTF_8 3 229 230 u_int8_t ces_designator_length; 231 232#define CES_MAX_DESIGNATOR_LENGTH (1 << 8) 233 u_int8_t ces_designator[CES_MAX_DESIGNATOR_LENGTH + 1]; 234}; 235 236struct changer_element_status_request { 237 u_int16_t cesr_element_type; 238 u_int16_t cesr_element_base; 239 u_int16_t cesr_element_count; 240 241 u_int16_t cesr_flags; 242#define CESR_VOLTAGS 0x01 243 244 struct changer_element_status *cesr_element_status; 245}; 246 247 248struct changer_set_voltag_request { 249 u_int16_t csvr_type; 250 u_int16_t csvr_addr; 251 252 u_int16_t csvr_flags; 253#define CSVR_MODE_MASK 0x0f /* mode mask, acceptable modes below: */ 254#define CSVR_MODE_SET 0x00 /* set volume tag if not set */ 255#define CSVR_MODE_REPLACE 0x01 /* unconditionally replace volume tag */ 256#define CSVR_MODE_CLEAR 0x02 /* clear volume tag */ 257 258#define CSVR_ALTERNATE 0x10 /* set to work with alternate voltag */ 259 260 changer_voltag_t csvr_voltag; 261}; 262 263 264#define CESTATUS_BITS \ 265 "\20\6INEAB\5EXENAB\4ACCESS\3EXCEPT\2IMPEXP\1FULL" 266 267#define CHIOMOVE _IOW('c', 0x01, struct changer_move) 268#define CHIOEXCHANGE _IOW('c', 0x02, struct changer_exchange) 269#define CHIOPOSITION _IOW('c', 0x03, struct changer_position) 270#define CHIOGPICKER _IOR('c', 0x04, int) 271#define CHIOSPICKER _IOW('c', 0x05, int) 272#define CHIOGPARAMS _IOR('c', 0x06, struct changer_params) 273#define CHIOIELEM _IOW('c', 0x07, u_int32_t) 274#define OCHIOGSTATUS _IOW('c', 0x08, struct changer_element_status_request) 275#define CHIOSETVOLTAG _IOW('c', 0x09, struct changer_set_voltag_request) 276#define CHIOGSTATUS _IOW('c', 0x0A, struct changer_element_status_request) 277 278#endif /* !_SYS_CHIO_H_ */ 279