1/*- 2 * Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved. 3 * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved. 4 * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * 9 * a) Redistributions of source code must retain the above copyright notice, 10 * this list of conditions and the following disclaimer. 11 * 12 * b) Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the distribution. 15 * 16 * c) Neither the name of Cisco Systems, Inc. nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD$"); 35 36#ifndef _NETINET_SCTP_CONSTANTS_H_ 37#define _NETINET_SCTP_CONSTANTS_H_ 38 39 40/* IANA assigned port number for SCTP over UDP encapsulation */ 41#define SCTP_OVER_UDP_TUNNELING_PORT 9899 42 43/* Number of packets to get before sack sent by default */ 44#define SCTP_DEFAULT_SACK_FREQ 2 45 46/* Address limit - This variable is calculated 47 * based on an 65535 byte max ip packet. We take out 100 bytes 48 * for the cookie, 40 bytes for a v6 header and 32 49 * bytes for the init structure. A second init structure 50 * for the init-ack and then finally a third one for the 51 * imbedded init. This yeilds 100+40+(3 * 32) = 236 bytes. 52 * This leaves 65299 bytes for addresses. We throw out the 299 bytes. 53 * Now whatever we send in the INIT() we need to allow to get back in the 54 * INIT-ACK plus all the values from INIT and INIT-ACK 55 * listed in the cookie. Plus we need some overhead for 56 * maybe copied parameters in the COOKIE. If we 57 * allow 1080 addresses, and each side has 1080 V6 addresses 58 * that will be 21600 bytes. In the INIT-ACK we will 59 * see the INIT-ACK 21600 + 43200 in the cookie. This leaves 60 * about 500 bytes slack for misc things in the cookie. 61 */ 62#define SCTP_ADDRESS_LIMIT 1080 63 64/* We need at least 2k of space for us, inits 65 * larger than that lets abort. 66 */ 67#define SCTP_LARGEST_INIT_ACCEPTED (65535 - 2048) 68 69/* Number of addresses where we just skip the counting */ 70#define SCTP_COUNT_LIMIT 40 71 72#define SCTP_ZERO_COPY_TICK_DELAY (((100 * hz) + 999) / 1000) 73#define SCTP_ZERO_COPY_SENDQ_TICK_DELAY (((100 * hz) + 999) / 1000) 74 75/* Number of ticks to delay before running 76 * iterator on an address change. 77 */ 78#define SCTP_ADDRESS_TICK_DELAY 2 79 80#define SCTP_VERSION_STRING "KAME-BSD 1.1" 81/* #define SCTP_AUDITING_ENABLED 1 used for debug/auditing */ 82#define SCTP_AUDIT_SIZE 256 83 84 85#define SCTP_KTRHEAD_NAME "sctp_iterator" 86#define SCTP_KTHREAD_PAGES 0 87 88#define SCTP_MCORE_NAME "sctp_core_worker" 89 90 91/* If you support Multi-VRF how big to 92 * make the initial array of VRF's to. 93 */ 94#define SCTP_DEFAULT_VRF_SIZE 4 95 96/* constants for rto calc */ 97#define sctp_align_safe_nocopy 0 98#define sctp_align_unsafe_makecopy 1 99 100/* JRS - Values defined for the HTCP algorithm */ 101#define ALPHA_BASE (1<<7) /* 1.0 with shift << 7 */ 102#define BETA_MIN (1<<6) /* 0.5 with shift << 7 */ 103#define BETA_MAX 102 /* 0.8 with shift << 7 */ 104 105/* Places that CWND log can happen from */ 106#define SCTP_CWND_LOG_FROM_FR 1 107#define SCTP_CWND_LOG_FROM_RTX 2 108#define SCTP_CWND_LOG_FROM_BRST 3 109#define SCTP_CWND_LOG_FROM_SS 4 110#define SCTP_CWND_LOG_FROM_CA 5 111#define SCTP_CWND_LOG_FROM_SAT 6 112#define SCTP_BLOCK_LOG_INTO_BLK 7 113#define SCTP_BLOCK_LOG_OUTOF_BLK 8 114#define SCTP_BLOCK_LOG_CHECK 9 115#define SCTP_STR_LOG_FROM_INTO_STRD 10 116#define SCTP_STR_LOG_FROM_IMMED_DEL 11 117#define SCTP_STR_LOG_FROM_INSERT_HD 12 118#define SCTP_STR_LOG_FROM_INSERT_MD 13 119#define SCTP_STR_LOG_FROM_INSERT_TL 14 120#define SCTP_STR_LOG_FROM_MARK_TSN 15 121#define SCTP_STR_LOG_FROM_EXPRS_DEL 16 122#define SCTP_FR_LOG_BIGGEST_TSNS 17 123#define SCTP_FR_LOG_STRIKE_TEST 18 124#define SCTP_FR_LOG_STRIKE_CHUNK 19 125#define SCTP_FR_T3_TIMEOUT 20 126#define SCTP_MAP_PREPARE_SLIDE 21 127#define SCTP_MAP_SLIDE_FROM 22 128#define SCTP_MAP_SLIDE_RESULT 23 129#define SCTP_MAP_SLIDE_CLEARED 24 130#define SCTP_MAP_SLIDE_NONE 25 131#define SCTP_FR_T3_MARK_TIME 26 132#define SCTP_FR_T3_MARKED 27 133#define SCTP_FR_T3_STOPPED 28 134#define SCTP_FR_MARKED 30 135#define SCTP_CWND_LOG_NOADV_SS 31 136#define SCTP_CWND_LOG_NOADV_CA 32 137#define SCTP_MAX_BURST_APPLIED 33 138#define SCTP_MAX_IFP_APPLIED 34 139#define SCTP_MAX_BURST_ERROR_STOP 35 140#define SCTP_INCREASE_PEER_RWND 36 141#define SCTP_DECREASE_PEER_RWND 37 142#define SCTP_SET_PEER_RWND_VIA_SACK 38 143#define SCTP_LOG_MBCNT_INCREASE 39 144#define SCTP_LOG_MBCNT_DECREASE 40 145#define SCTP_LOG_MBCNT_CHKSET 41 146#define SCTP_LOG_NEW_SACK 42 147#define SCTP_LOG_TSN_ACKED 43 148#define SCTP_LOG_TSN_REVOKED 44 149#define SCTP_LOG_LOCK_TCB 45 150#define SCTP_LOG_LOCK_INP 46 151#define SCTP_LOG_LOCK_SOCK 47 152#define SCTP_LOG_LOCK_SOCKBUF_R 48 153#define SCTP_LOG_LOCK_SOCKBUF_S 49 154#define SCTP_LOG_LOCK_CREATE 50 155#define SCTP_LOG_INITIAL_RTT 51 156#define SCTP_LOG_RTTVAR 52 157#define SCTP_LOG_SBALLOC 53 158#define SCTP_LOG_SBFREE 54 159#define SCTP_LOG_SBRESULT 55 160#define SCTP_FR_DUPED 56 161#define SCTP_FR_MARKED_EARLY 57 162#define SCTP_FR_CWND_REPORT 58 163#define SCTP_FR_CWND_REPORT_START 59 164#define SCTP_FR_CWND_REPORT_STOP 60 165#define SCTP_CWND_LOG_FROM_SEND 61 166#define SCTP_CWND_INITIALIZATION 62 167#define SCTP_CWND_LOG_FROM_T3 63 168#define SCTP_CWND_LOG_FROM_SACK 64 169#define SCTP_CWND_LOG_NO_CUMACK 65 170#define SCTP_CWND_LOG_FROM_RESEND 66 171#define SCTP_FR_LOG_CHECK_STRIKE 67 172#define SCTP_SEND_NOW_COMPLETES 68 173#define SCTP_CWND_LOG_FILL_OUTQ_CALLED 69 174#define SCTP_CWND_LOG_FILL_OUTQ_FILLS 70 175#define SCTP_LOG_FREE_SENT 71 176#define SCTP_NAGLE_APPLIED 72 177#define SCTP_NAGLE_SKIPPED 73 178#define SCTP_WAKESND_FROM_SACK 74 179#define SCTP_WAKESND_FROM_FWDTSN 75 180#define SCTP_NOWAKE_FROM_SACK 76 181#define SCTP_CWNDLOG_PRESEND 77 182#define SCTP_CWNDLOG_ENDSEND 78 183#define SCTP_AT_END_OF_SACK 79 184#define SCTP_REASON_FOR_SC 80 185#define SCTP_BLOCK_LOG_INTO_BLKA 81 186#define SCTP_ENTER_USER_RECV 82 187#define SCTP_USER_RECV_SACKS 83 188#define SCTP_SORECV_BLOCKSA 84 189#define SCTP_SORECV_BLOCKSB 85 190#define SCTP_SORECV_DONE 86 191#define SCTP_SACK_RWND_UPDATE 87 192#define SCTP_SORECV_ENTER 88 193#define SCTP_SORECV_ENTERPL 89 194#define SCTP_MBUF_INPUT 90 195#define SCTP_MBUF_IALLOC 91 196#define SCTP_MBUF_IFREE 92 197#define SCTP_MBUF_ICOPY 93 198#define SCTP_MBUF_SPLIT 94 199#define SCTP_SORCV_FREECTL 95 200#define SCTP_SORCV_DOESCPY 96 201#define SCTP_SORCV_DOESLCK 97 202#define SCTP_SORCV_DOESADJ 98 203#define SCTP_SORCV_BOTWHILE 99 204#define SCTP_SORCV_PASSBF 100 205#define SCTP_SORCV_ADJD 101 206#define SCTP_UNKNOWN_MAX 102 207#define SCTP_RANDY_STUFF 103 208#define SCTP_RANDY_STUFF1 104 209#define SCTP_STRMOUT_LOG_ASSIGN 105 210#define SCTP_STRMOUT_LOG_SEND 106 211#define SCTP_FLIGHT_LOG_DOWN_CA 107 212#define SCTP_FLIGHT_LOG_UP 108 213#define SCTP_FLIGHT_LOG_DOWN_GAP 109 214#define SCTP_FLIGHT_LOG_DOWN_RSND 110 215#define SCTP_FLIGHT_LOG_UP_RSND 111 216#define SCTP_FLIGHT_LOG_DOWN_RSND_TO 112 217#define SCTP_FLIGHT_LOG_DOWN_WP 113 218#define SCTP_FLIGHT_LOG_UP_REVOKE 114 219#define SCTP_FLIGHT_LOG_DOWN_PDRP 115 220#define SCTP_FLIGHT_LOG_DOWN_PMTU 116 221#define SCTP_SACK_LOG_NORMAL 117 222#define SCTP_SACK_LOG_EXPRESS 118 223#define SCTP_MAP_TSN_ENTERS 119 224#define SCTP_THRESHOLD_CLEAR 120 225#define SCTP_THRESHOLD_INCR 121 226#define SCTP_FLIGHT_LOG_DWN_WP_FWD 122 227#define SCTP_FWD_TSN_CHECK 123 228#define SCTP_LOG_MAX_TYPES 124 229/* 230 * To turn on various logging, you must first enable 'options KTR' and 231 * you might want to bump the entires 'options KTR_ENTRIES=80000'. 232 * To get something to log you define one of the logging defines. 233 * (see LINT). 234 * 235 * This gets the compile in place, but you still need to turn the 236 * logging flag on too in the sysctl (see in sctp.h). 237 */ 238 239#define SCTP_LOG_EVENT_UNKNOWN 0 240#define SCTP_LOG_EVENT_CWND 1 241#define SCTP_LOG_EVENT_BLOCK 2 242#define SCTP_LOG_EVENT_STRM 3 243#define SCTP_LOG_EVENT_FR 4 244#define SCTP_LOG_EVENT_MAP 5 245#define SCTP_LOG_EVENT_MAXBURST 6 246#define SCTP_LOG_EVENT_RWND 7 247#define SCTP_LOG_EVENT_MBCNT 8 248#define SCTP_LOG_EVENT_SACK 9 249#define SCTP_LOG_LOCK_EVENT 10 250#define SCTP_LOG_EVENT_RTT 11 251#define SCTP_LOG_EVENT_SB 12 252#define SCTP_LOG_EVENT_NAGLE 13 253#define SCTP_LOG_EVENT_WAKE 14 254#define SCTP_LOG_MISC_EVENT 15 255#define SCTP_LOG_EVENT_CLOSE 16 256#define SCTP_LOG_EVENT_MBUF 17 257#define SCTP_LOG_CHUNK_PROC 18 258#define SCTP_LOG_ERROR_RET 19 259 260#define SCTP_LOG_MAX_EVENT 20 261 262#define SCTP_LOCK_UNKNOWN 2 263 264 265/* number of associations by default for zone allocation */ 266#define SCTP_MAX_NUM_OF_ASOC 40000 267/* how many addresses per assoc remote and local */ 268#define SCTP_SCALE_FOR_ADDR 2 269 270/* default AUTO_ASCONF mode enable(1)/disable(0) value (sysctl) */ 271#define SCTP_DEFAULT_AUTO_ASCONF 1 272 273/* default MULTIPLE_ASCONF mode enable(1)/disable(0) value (sysctl) */ 274#define SCTP_DEFAULT_MULTIPLE_ASCONFS 0 275 276/* default MOBILITY_BASE mode enable(1)/disable(0) value (sysctl) */ 277#define SCTP_DEFAULT_MOBILITY_BASE 0 278 279/* default MOBILITY_FASTHANDOFF mode enable(1)/disable(0) value (sysctl) */ 280#define SCTP_DEFAULT_MOBILITY_FASTHANDOFF 0 281 282/* 283 * Theshold for rwnd updates, we have to read (sb_hiwat >> 284 * SCTP_RWND_HIWAT_SHIFT) before we will look to see if we need to send a 285 * window update sack. When we look, we compare the last rwnd we sent vs the 286 * current rwnd. It too must be greater than this value. Using 3 divdes the 287 * hiwat by 8, so for 200k rwnd we need to read 24k. For a 64k rwnd we need 288 * to read 8k. This seems about right.. I hope :-D.. we do set a 289 * min of a MTU on it so if the rwnd is real small we will insist 290 * on a full MTU of 1500 bytes. 291 */ 292#define SCTP_RWND_HIWAT_SHIFT 3 293 294/* How much of the rwnd must the 295 * message be taking up to start partial delivery. 296 * We calculate this by shifing the hi_water (recv_win) 297 * left the following .. set to 1, when a message holds 298 * 1/2 the rwnd. If we set it to 2 when a message holds 299 * 1/4 the rwnd...etc.. 300 */ 301 302#define SCTP_PARTIAL_DELIVERY_SHIFT 1 303 304/* 305 * default HMAC for cookies, etc... use one of the AUTH HMAC id's 306 * SCTP_HMAC is the HMAC_ID to use 307 * SCTP_SIGNATURE_SIZE is the digest length 308 */ 309#define SCTP_HMAC SCTP_AUTH_HMAC_ID_SHA1 310#define SCTP_SIGNATURE_SIZE SCTP_AUTH_DIGEST_LEN_SHA1 311#define SCTP_SIGNATURE_ALOC_SIZE SCTP_SIGNATURE_SIZE 312 313/* 314 * the SCTP protocol signature this includes the version number encoded in 315 * the last 4 bits of the signature. 316 */ 317#define PROTO_SIGNATURE_A 0x30000000 318#define SCTP_VERSION_NUMBER 0x3 319 320#define MAX_TSN 0xffffffff 321 322/* how many executions every N tick's */ 323#define SCTP_ITERATOR_MAX_AT_ONCE 20 324 325/* number of clock ticks between iterator executions */ 326#define SCTP_ITERATOR_TICKS 1 327 328/* 329 * option: If you comment out the following you will receive the old behavior 330 * of obeying cwnd for the fast retransmit algorithm. With this defined a FR 331 * happens right away with-out waiting for the flightsize to drop below the 332 * cwnd value (which is reduced by the FR to 1/2 the inflight packets). 333 */ 334#define SCTP_IGNORE_CWND_ON_FR 1 335 336/* 337 * Adds implementors guide behavior to only use newest highest update in SACK 338 * gap ack's to figure out if you need to stroke a chunk for FR. 339 */ 340#define SCTP_NO_FR_UNLESS_SEGMENT_SMALLER 1 341 342/* default max I can burst out after a fast retransmit, 0 disables it */ 343#define SCTP_DEF_MAX_BURST 4 344#define SCTP_DEF_HBMAX_BURST 4 345#define SCTP_DEF_FRMAX_BURST 4 346 347/* RTO calculation flag to say if it 348 * is safe to determine local lan or not. 349 */ 350#define SCTP_RTT_FROM_NON_DATA 0 351#define SCTP_RTT_FROM_DATA 1 352 353 354/* IP hdr (20/40) + 12+2+2 (enet) + sctp common 12 */ 355#define SCTP_FIRST_MBUF_RESV 68 356/* Packet transmit states in the sent field */ 357#define SCTP_DATAGRAM_UNSENT 0 358#define SCTP_DATAGRAM_SENT 1 359#define SCTP_DATAGRAM_RESEND1 2 /* not used (in code, but may 360 * hit this value) */ 361#define SCTP_DATAGRAM_RESEND2 3 /* not used (in code, but may 362 * hit this value) */ 363#define SCTP_DATAGRAM_RESEND 4 364#define SCTP_DATAGRAM_ACKED 10010 365#define SCTP_DATAGRAM_MARKED 20010 366#define SCTP_FORWARD_TSN_SKIP 30010 367#define SCTP_DATAGRAM_NR_ACKED 40010 368 369/* chunk output send from locations */ 370#define SCTP_OUTPUT_FROM_USR_SEND 0 371#define SCTP_OUTPUT_FROM_T3 1 372#define SCTP_OUTPUT_FROM_INPUT_ERROR 2 373#define SCTP_OUTPUT_FROM_CONTROL_PROC 3 374#define SCTP_OUTPUT_FROM_SACK_TMR 4 375#define SCTP_OUTPUT_FROM_SHUT_TMR 5 376#define SCTP_OUTPUT_FROM_HB_TMR 6 377#define SCTP_OUTPUT_FROM_SHUT_ACK_TMR 7 378#define SCTP_OUTPUT_FROM_ASCONF_TMR 8 379#define SCTP_OUTPUT_FROM_STRRST_TMR 9 380#define SCTP_OUTPUT_FROM_AUTOCLOSE_TMR 10 381#define SCTP_OUTPUT_FROM_EARLY_FR_TMR 11 382#define SCTP_OUTPUT_FROM_STRRST_REQ 12 383#define SCTP_OUTPUT_FROM_USR_RCVD 13 384#define SCTP_OUTPUT_FROM_COOKIE_ACK 14 385#define SCTP_OUTPUT_FROM_DRAIN 15 386#define SCTP_OUTPUT_FROM_CLOSING 16 387#define SCTP_OUTPUT_FROM_SOCKOPT 17 388 389/* SCTP chunk types are moved sctp.h for application (NAT, FW) use */ 390 391/* align to 32-bit sizes */ 392#define SCTP_SIZE32(x) ((((x) + 3) >> 2) << 2) 393 394#define IS_SCTP_CONTROL(a) ((a)->chunk_type != SCTP_DATA) 395#define IS_SCTP_DATA(a) ((a)->chunk_type == SCTP_DATA) 396 397 398/* SCTP parameter types */ 399/*************0x0000 series*************/ 400#define SCTP_HEARTBEAT_INFO 0x0001 401#define SCTP_IPV4_ADDRESS 0x0005 402#define SCTP_IPV6_ADDRESS 0x0006 403#define SCTP_STATE_COOKIE 0x0007 404#define SCTP_UNRECOG_PARAM 0x0008 405#define SCTP_COOKIE_PRESERVE 0x0009 406#define SCTP_HOSTNAME_ADDRESS 0x000b 407#define SCTP_SUPPORTED_ADDRTYPE 0x000c 408 409/* draft-ietf-stewart-tsvwg-strreset-xxx */ 410#define SCTP_STR_RESET_OUT_REQUEST 0x000d 411#define SCTP_STR_RESET_IN_REQUEST 0x000e 412#define SCTP_STR_RESET_TSN_REQUEST 0x000f 413#define SCTP_STR_RESET_RESPONSE 0x0010 414#define SCTP_STR_RESET_ADD_OUT_STREAMS 0x0011 415#define SCTP_STR_RESET_ADD_IN_STREAMS 0x0012 416 417#define SCTP_MAX_RESET_PARAMS 2 418#define SCTP_STREAM_RESET_TSN_DELTA 0x1000 419 420/*************0x4000 series*************/ 421 422/*************0x8000 series*************/ 423#define SCTP_ECN_CAPABLE 0x8000 424 425/* draft-ietf-tsvwg-auth-xxx */ 426#define SCTP_RANDOM 0x8002 427#define SCTP_CHUNK_LIST 0x8003 428#define SCTP_HMAC_LIST 0x8004 429/* 430 * draft-ietf-tsvwg-addip-sctp-xx param=0x8008 len=0xNNNN Byte | Byte | Byte 431 * | Byte Byte | Byte ... 432 * 433 * Where each byte is a chunk type extension supported. For example, to support 434 * all chunks one would have (in hex): 435 * 436 * 80 01 00 09 C0 C1 80 81 82 00 00 00 437 * 438 * Has the parameter. C0 = PR-SCTP (RFC3758) C1, 80 = ASCONF (addip draft) 81 439 * = Packet Drop 82 = Stream Reset 83 = Authentication 440 */ 441#define SCTP_SUPPORTED_CHUNK_EXT 0x8008 442 443/*************0xC000 series*************/ 444#define SCTP_PRSCTP_SUPPORTED 0xc000 445/* draft-ietf-tsvwg-addip-sctp */ 446#define SCTP_ADD_IP_ADDRESS 0xc001 447#define SCTP_DEL_IP_ADDRESS 0xc002 448#define SCTP_ERROR_CAUSE_IND 0xc003 449#define SCTP_SET_PRIM_ADDR 0xc004 450#define SCTP_SUCCESS_REPORT 0xc005 451#define SCTP_ULP_ADAPTATION 0xc006 452/* behave-nat-draft */ 453#define SCTP_HAS_NAT_SUPPORT 0xc007 454#define SCTP_NAT_VTAGS 0xc008 455 456/* bits for TOS field */ 457#define SCTP_ECT0_BIT 0x02 458#define SCTP_ECT1_BIT 0x01 459#define SCTP_CE_BITS 0x03 460 461/* below turns off above */ 462#define SCTP_FLEXIBLE_ADDRESS 0x20 463#define SCTP_NO_HEARTBEAT 0x40 464 465/* mask to get sticky */ 466#define SCTP_STICKY_OPTIONS_MASK 0x0c 467 468 469/* 470 * SCTP states for internal state machine XXX (should match "user" values) 471 */ 472#define SCTP_STATE_EMPTY 0x0000 473#define SCTP_STATE_INUSE 0x0001 474#define SCTP_STATE_COOKIE_WAIT 0x0002 475#define SCTP_STATE_COOKIE_ECHOED 0x0004 476#define SCTP_STATE_OPEN 0x0008 477#define SCTP_STATE_SHUTDOWN_SENT 0x0010 478#define SCTP_STATE_SHUTDOWN_RECEIVED 0x0020 479#define SCTP_STATE_SHUTDOWN_ACK_SENT 0x0040 480#define SCTP_STATE_SHUTDOWN_PENDING 0x0080 481#define SCTP_STATE_CLOSED_SOCKET 0x0100 482#define SCTP_STATE_ABOUT_TO_BE_FREED 0x0200 483#define SCTP_STATE_PARTIAL_MSG_LEFT 0x0400 484#define SCTP_STATE_WAS_ABORTED 0x0800 485#define SCTP_STATE_IN_ACCEPT_QUEUE 0x1000 486#define SCTP_STATE_MASK 0x007f 487 488#define SCTP_GET_STATE(asoc) ((asoc)->state & SCTP_STATE_MASK) 489#define SCTP_SET_STATE(asoc, newstate) ((asoc)->state = ((asoc)->state & ~SCTP_STATE_MASK) | newstate) 490#define SCTP_CLEAR_SUBSTATE(asoc, substate) ((asoc)->state &= ~substate) 491#define SCTP_ADD_SUBSTATE(asoc, substate) ((asoc)->state |= substate) 492 493/* SCTP reachability state for each address */ 494#define SCTP_ADDR_REACHABLE 0x001 495#define SCTP_ADDR_NO_PMTUD 0x002 496#define SCTP_ADDR_NOHB 0x004 497#define SCTP_ADDR_BEING_DELETED 0x008 498#define SCTP_ADDR_NOT_IN_ASSOC 0x010 499#define SCTP_ADDR_OUT_OF_SCOPE 0x080 500#define SCTP_ADDR_UNCONFIRMED 0x200 501#define SCTP_ADDR_REQ_PRIMARY 0x400 502/* JRS 5/13/07 - Added potentially failed state for CMT PF */ 503#define SCTP_ADDR_PF 0x800 504 505/* bound address types (e.g. valid address types to allow) */ 506#define SCTP_BOUND_V6 0x01 507#define SCTP_BOUND_V4 0x02 508 509/* 510 * what is the default number of mbufs in a chain I allow before switching to 511 * a cluster 512 */ 513#define SCTP_DEFAULT_MBUFS_IN_CHAIN 5 514 515/* How long a cookie lives in milli-seconds */ 516#define SCTP_DEFAULT_COOKIE_LIFE 60000 517 518/* Maximum the mapping array will grow to (TSN mapping array) */ 519#define SCTP_MAPPING_ARRAY 512 520 521/* size of the inital malloc on the mapping array */ 522#define SCTP_INITIAL_MAPPING_ARRAY 16 523/* how much we grow the mapping array each call */ 524#define SCTP_MAPPING_ARRAY_INCR 32 525 526/* 527 * Here we define the timer types used by the implementation as arguments in 528 * the set/get timer type calls. 529 */ 530#define SCTP_TIMER_INIT 0 531#define SCTP_TIMER_RECV 1 532#define SCTP_TIMER_SEND 2 533#define SCTP_TIMER_HEARTBEAT 3 534#define SCTP_TIMER_PMTU 4 535#define SCTP_TIMER_MAXSHUTDOWN 5 536#define SCTP_TIMER_SIGNATURE 6 537/* 538 * number of timer types in the base SCTP structure used in the set/get and 539 * has the base default. 540 */ 541#define SCTP_NUM_TMRS 7 542 543/* timer types */ 544#define SCTP_TIMER_TYPE_NONE 0 545#define SCTP_TIMER_TYPE_SEND 1 546#define SCTP_TIMER_TYPE_INIT 2 547#define SCTP_TIMER_TYPE_RECV 3 548#define SCTP_TIMER_TYPE_SHUTDOWN 4 549#define SCTP_TIMER_TYPE_HEARTBEAT 5 550#define SCTP_TIMER_TYPE_COOKIE 6 551#define SCTP_TIMER_TYPE_NEWCOOKIE 7 552#define SCTP_TIMER_TYPE_PATHMTURAISE 8 553#define SCTP_TIMER_TYPE_SHUTDOWNACK 9 554#define SCTP_TIMER_TYPE_ASCONF 10 555#define SCTP_TIMER_TYPE_SHUTDOWNGUARD 11 556#define SCTP_TIMER_TYPE_AUTOCLOSE 12 557#define SCTP_TIMER_TYPE_EVENTWAKE 13 558#define SCTP_TIMER_TYPE_STRRESET 14 559#define SCTP_TIMER_TYPE_INPKILL 15 560#define SCTP_TIMER_TYPE_ASOCKILL 16 561#define SCTP_TIMER_TYPE_ADDR_WQ 17 562#define SCTP_TIMER_TYPE_ZERO_COPY 18 563#define SCTP_TIMER_TYPE_ZCOPY_SENDQ 19 564#define SCTP_TIMER_TYPE_PRIM_DELETED 20 565/* add new timers here - and increment LAST */ 566#define SCTP_TIMER_TYPE_LAST 21 567 568#define SCTP_IS_TIMER_TYPE_VALID(t) (((t) > SCTP_TIMER_TYPE_NONE) && \ 569 ((t) < SCTP_TIMER_TYPE_LAST)) 570 571 572 573/* max number of TSN's dup'd that I will hold */ 574#define SCTP_MAX_DUP_TSNS 20 575 576/* 577 * Here we define the types used when setting the retry amounts. 578 */ 579/* How many drop re-attempts we make on INIT/COOKIE-ECHO */ 580#define SCTP_RETRY_DROPPED_THRESH 4 581 582/* 583 * Maxmium number of chunks a single association can have on it. Note that 584 * this is a squishy number since the count can run over this if the user 585 * sends a large message down .. the fragmented chunks don't count until 586 * AFTER the message is on queue.. it would be the next send that blocks 587 * things. This number will get tuned up at boot in the sctp_init and use the 588 * number of clusters as a base. This way high bandwidth environments will 589 * not get impacted by the lower bandwidth sending a bunch of 1 byte chunks 590 */ 591#define SCTP_ASOC_MAX_CHUNKS_ON_QUEUE 512 592 593 594/* The conversion from time to ticks and vice versa is done by rounding 595 * upwards. This way we can test in the code the time to be positive and 596 * know that this corresponds to a positive number of ticks. 597 */ 598#define MSEC_TO_TICKS(x) ((hz == 1000) ? x : ((((x) * hz) + 999) / 1000)) 599#define TICKS_TO_MSEC(x) ((hz == 1000) ? x : ((((x) * 1000) + (hz - 1)) / hz)) 600 601#define SEC_TO_TICKS(x) ((x) * hz) 602#define TICKS_TO_SEC(x) (((x) + (hz - 1)) / hz) 603 604/* 605 * Basically the minimum amount of time before I do a early FR. Making this 606 * value to low will cause duplicate retransmissions. 607 */ 608#define SCTP_MINFR_MSEC_TIMER 250 609/* The floor this value is allowed to fall to when starting a timer. */ 610#define SCTP_MINFR_MSEC_FLOOR 20 611 612/* init timer def = 1 sec */ 613#define SCTP_INIT_SEC 1 614 615/* send timer def = 1 seconds */ 616#define SCTP_SEND_SEC 1 617 618/* recv timer def = 200ms */ 619#define SCTP_RECV_MSEC 200 620 621/* 30 seconds + RTO (in ms) */ 622#define SCTP_HB_DEFAULT_MSEC 30000 623 624/* Max time I will wait for Shutdown to complete */ 625#define SCTP_DEF_MAX_SHUTDOWN_SEC 180 626 627 628/* 629 * This is how long a secret lives, NOT how long a cookie lives how many 630 * ticks the current secret will live. 631 */ 632#define SCTP_DEFAULT_SECRET_LIFE_SEC 3600 633 634#define SCTP_RTO_UPPER_BOUND (60000) /* 60 sec in ms */ 635#define SCTP_RTO_LOWER_BOUND (1000) /* 1 sec is ms */ 636#define SCTP_RTO_INITIAL (3000) /* 3 sec in ms */ 637 638 639#define SCTP_INP_KILL_TIMEOUT 20/* number of ms to retry kill of inpcb */ 640#define SCTP_ASOC_KILL_TIMEOUT 10 /* number of ms to retry kill of inpcb */ 641 642#define SCTP_DEF_MAX_INIT 8 643#define SCTP_DEF_MAX_SEND 10 644#define SCTP_DEF_MAX_PATH_RTX 5 645#define SCTP_DEF_PATH_PF_THRESHOLD SCTP_DEF_MAX_PATH_RTX 646 647#define SCTP_DEF_PMTU_RAISE_SEC 600 /* 10 min between raise attempts */ 648 649 650/* How many streams I request initally by default */ 651#define SCTP_OSTREAM_INITIAL 10 652#define SCTP_ISTREAM_INITIAL 2048 653 654/* 655 * How many smallest_mtu's need to increase before a window update sack is 656 * sent (should be a power of 2). 657 */ 658/* Send window update (incr * this > hiwat). Should be a power of 2 */ 659#define SCTP_MINIMAL_RWND (4096) /* minimal rwnd */ 660 661#define SCTP_ADDRMAX 16 662 663/* SCTP DEBUG Switch parameters */ 664#define SCTP_DEBUG_TIMER1 0x00000001 665#define SCTP_DEBUG_TIMER2 0x00000002 /* unused */ 666#define SCTP_DEBUG_TIMER3 0x00000004 /* unused */ 667#define SCTP_DEBUG_TIMER4 0x00000008 668#define SCTP_DEBUG_OUTPUT1 0x00000010 669#define SCTP_DEBUG_OUTPUT2 0x00000020 670#define SCTP_DEBUG_OUTPUT3 0x00000040 671#define SCTP_DEBUG_OUTPUT4 0x00000080 672#define SCTP_DEBUG_UTIL1 0x00000100 673#define SCTP_DEBUG_UTIL2 0x00000200 /* unused */ 674#define SCTP_DEBUG_AUTH1 0x00000400 675#define SCTP_DEBUG_AUTH2 0x00000800 /* unused */ 676#define SCTP_DEBUG_INPUT1 0x00001000 677#define SCTP_DEBUG_INPUT2 0x00002000 678#define SCTP_DEBUG_INPUT3 0x00004000 679#define SCTP_DEBUG_INPUT4 0x00008000 /* unused */ 680#define SCTP_DEBUG_ASCONF1 0x00010000 681#define SCTP_DEBUG_ASCONF2 0x00020000 682#define SCTP_DEBUG_OUTPUT5 0x00040000 /* unused */ 683#define SCTP_DEBUG_XXX 0x00080000 /* unused */ 684#define SCTP_DEBUG_PCB1 0x00100000 685#define SCTP_DEBUG_PCB2 0x00200000 /* unused */ 686#define SCTP_DEBUG_PCB3 0x00400000 687#define SCTP_DEBUG_PCB4 0x00800000 688#define SCTP_DEBUG_INDATA1 0x01000000 689#define SCTP_DEBUG_INDATA2 0x02000000 /* unused */ 690#define SCTP_DEBUG_INDATA3 0x04000000 /* unused */ 691#define SCTP_DEBUG_CRCOFFLOAD 0x08000000 /* unused */ 692#define SCTP_DEBUG_USRREQ1 0x10000000 /* unused */ 693#define SCTP_DEBUG_USRREQ2 0x20000000 /* unused */ 694#define SCTP_DEBUG_PEEL1 0x40000000 695#define SCTP_DEBUG_XXXXX 0x80000000 /* unused */ 696#define SCTP_DEBUG_ALL 0x7ff3ffff 697#define SCTP_DEBUG_NOISY 0x00040000 698 699/* What sender needs to see to avoid SWS or we consider peers rwnd 0 */ 700#define SCTP_SWS_SENDER_DEF 1420 701 702/* 703 * SWS is scaled to the sb_hiwat of the socket. A value of 2 is hiwat/4, 1 704 * would be hiwat/2 etc. 705 */ 706/* What receiver needs to see in sockbuf or we tell peer its 1 */ 707#define SCTP_SWS_RECEIVER_DEF 3000 708 709#define SCTP_INITIAL_CWND 4380 710 711#define SCTP_DEFAULT_MTU 1500 /* emergency default MTU */ 712/* amount peer is obligated to have in rwnd or I will abort */ 713#define SCTP_MIN_RWND 1500 714 715#define SCTP_DEFAULT_MAXSEGMENT 65535 716 717#define SCTP_CHUNK_BUFFER_SIZE 512 718#define SCTP_PARAM_BUFFER_SIZE 512 719 720/* small chunk store for looking at chunk_list in auth */ 721#define SCTP_SMALL_CHUNK_STORE 260 722 723#define SCTP_HOW_MANY_SECRETS 2 /* how many secrets I keep */ 724 725#define SCTP_NUMBER_OF_SECRETS 8 /* or 8 * 4 = 32 octets */ 726#define SCTP_SECRET_SIZE 32 /* number of octets in a 256 bits */ 727 728 729/* 730 * SCTP upper layer notifications 731 */ 732#define SCTP_NOTIFY_ASSOC_UP 1 733#define SCTP_NOTIFY_ASSOC_DOWN 2 734#define SCTP_NOTIFY_INTERFACE_DOWN 3 735#define SCTP_NOTIFY_INTERFACE_UP 4 736#define SCTP_NOTIFY_SENT_DG_FAIL 5 737#define SCTP_NOTIFY_UNSENT_DG_FAIL 6 738#define SCTP_NOTIFY_SPECIAL_SP_FAIL 7 739#define SCTP_NOTIFY_ASSOC_LOC_ABORTED 8 740#define SCTP_NOTIFY_ASSOC_REM_ABORTED 9 741#define SCTP_NOTIFY_ASSOC_RESTART 10 742#define SCTP_NOTIFY_PEER_SHUTDOWN 11 743#define SCTP_NOTIFY_ASCONF_ADD_IP 12 744#define SCTP_NOTIFY_ASCONF_DELETE_IP 13 745#define SCTP_NOTIFY_ASCONF_SET_PRIMARY 14 746#define SCTP_NOTIFY_PARTIAL_DELVIERY_INDICATION 15 747#define SCTP_NOTIFY_INTERFACE_CONFIRMED 16 748#define SCTP_NOTIFY_STR_RESET_RECV 17 749#define SCTP_NOTIFY_STR_RESET_SEND 18 750#define SCTP_NOTIFY_STR_RESET_FAILED_OUT 19 751#define SCTP_NOTIFY_STR_RESET_FAILED_IN 20 752#define SCTP_NOTIFY_STR_RESET_DENIED_OUT 21 753#define SCTP_NOTIFY_STR_RESET_DENIED_IN 22 754#define SCTP_NOTIFY_AUTH_NEW_KEY 23 755#define SCTP_NOTIFY_AUTH_FREE_KEY 24 756#define SCTP_NOTIFY_NO_PEER_AUTH 25 757#define SCTP_NOTIFY_SENDER_DRY 26 758#define SCTP_NOTIFY_REMOTE_ERROR 27 759 760/* This is the value for messages that are NOT completely 761 * copied down where we will start to split the message. 762 * So, with our default, we split only if the piece we 763 * want to take will fill up a full MTU (assuming 764 * a 1500 byte MTU). 765 */ 766#define SCTP_DEFAULT_SPLIT_POINT_MIN 2904 767 768/* Maximum length of diagnostic information in error causes */ 769#define SCTP_DIAG_INFO_LEN 64 770 771/* ABORT CODES and other tell-tale location 772 * codes are generated by adding the below 773 * to the instance id. 774 */ 775 776/* File defines */ 777#define SCTP_FROM_SCTP_INPUT 0x10000000 778#define SCTP_FROM_SCTP_PCB 0x20000000 779#define SCTP_FROM_SCTP_INDATA 0x30000000 780#define SCTP_FROM_SCTP_TIMER 0x40000000 781#define SCTP_FROM_SCTP_USRREQ 0x50000000 782#define SCTP_FROM_SCTPUTIL 0x60000000 783#define SCTP_FROM_SCTP6_USRREQ 0x70000000 784#define SCTP_FROM_SCTP_ASCONF 0x80000000 785#define SCTP_FROM_SCTP_OUTPUT 0x90000000 786#define SCTP_FROM_SCTP_PEELOFF 0xa0000000 787#define SCTP_FROM_SCTP_PANDA 0xb0000000 788#define SCTP_FROM_SCTP_SYSCTL 0xc0000000 789 790/* Location ID's */ 791#define SCTP_LOC_1 0x00000001 792#define SCTP_LOC_2 0x00000002 793#define SCTP_LOC_3 0x00000003 794#define SCTP_LOC_4 0x00000004 795#define SCTP_LOC_5 0x00000005 796#define SCTP_LOC_6 0x00000006 797#define SCTP_LOC_7 0x00000007 798#define SCTP_LOC_8 0x00000008 799#define SCTP_LOC_9 0x00000009 800#define SCTP_LOC_10 0x0000000a 801#define SCTP_LOC_11 0x0000000b 802#define SCTP_LOC_12 0x0000000c 803#define SCTP_LOC_13 0x0000000d 804#define SCTP_LOC_14 0x0000000e 805#define SCTP_LOC_15 0x0000000f 806#define SCTP_LOC_16 0x00000010 807#define SCTP_LOC_17 0x00000011 808#define SCTP_LOC_18 0x00000012 809#define SCTP_LOC_19 0x00000013 810#define SCTP_LOC_20 0x00000014 811#define SCTP_LOC_21 0x00000015 812#define SCTP_LOC_22 0x00000016 813#define SCTP_LOC_23 0x00000017 814#define SCTP_LOC_24 0x00000018 815#define SCTP_LOC_25 0x00000019 816#define SCTP_LOC_26 0x0000001a 817#define SCTP_LOC_27 0x0000001b 818#define SCTP_LOC_28 0x0000001c 819#define SCTP_LOC_29 0x0000001d 820#define SCTP_LOC_30 0x0000001e 821#define SCTP_LOC_31 0x0000001f 822#define SCTP_LOC_32 0x00000020 823#define SCTP_LOC_33 0x00000021 824 825 826/* Free assoc codes */ 827#define SCTP_NORMAL_PROC 0 828#define SCTP_PCBFREE_NOFORCE 1 829#define SCTP_PCBFREE_FORCE 2 830 831/* From codes for adding addresses */ 832#define SCTP_ADDR_IS_CONFIRMED 8 833#define SCTP_ADDR_DYNAMIC_ADDED 6 834#define SCTP_IN_COOKIE_PROC 100 835#define SCTP_ALLOC_ASOC 1 836#define SCTP_LOAD_ADDR_2 2 837#define SCTP_LOAD_ADDR_3 3 838#define SCTP_LOAD_ADDR_4 4 839#define SCTP_LOAD_ADDR_5 5 840 841#define SCTP_DONOT_SETSCOPE 0 842#define SCTP_DO_SETSCOPE 1 843 844 845/* This value determines the default for when 846 * we try to add more on the send queue., if 847 * there is room. This prevents us from cycling 848 * into the copy_resume routine to often if 849 * we have not got enough space to add a decent 850 * enough size message. Note that if we have enough 851 * space to complete the message copy we will always 852 * add to the message, no matter what the size. Its 853 * only when we reach the point that we have some left 854 * to add, there is only room for part of it that we 855 * will use this threshold. Its also a sysctl. 856 */ 857#define SCTP_DEFAULT_ADD_MORE 1452 858 859#ifndef SCTP_PCBHASHSIZE 860/* default number of association hash buckets in each endpoint */ 861#define SCTP_PCBHASHSIZE 256 862#endif 863#ifndef SCTP_TCBHASHSIZE 864#define SCTP_TCBHASHSIZE 1024 865#endif 866 867#ifndef SCTP_CHUNKQUEUE_SCALE 868#define SCTP_CHUNKQUEUE_SCALE 10 869#endif 870 871/* clock variance is 1 ms */ 872#define SCTP_CLOCK_GRANULARITY 1 873#define IP_HDR_SIZE 40 /* we use the size of a IP6 header here this 874 * detracts a small amount for ipv4 but it 875 * simplifies the ipv6 addition */ 876 877/* Argument magic number for sctp_inpcb_free() */ 878 879/* third argument */ 880#define SCTP_CALLED_DIRECTLY_NOCMPSET 0 881#define SCTP_CALLED_AFTER_CMPSET_OFCLOSE 1 882#define SCTP_CALLED_FROM_INPKILL_TIMER 2 883/* second argument */ 884#define SCTP_FREE_SHOULD_USE_ABORT 1 885#define SCTP_FREE_SHOULD_USE_GRACEFUL_CLOSE 0 886 887#ifndef IPPROTO_SCTP 888#define IPPROTO_SCTP 132 /* the Official IANA number :-) */ 889#endif /* !IPPROTO_SCTP */ 890 891#define SCTP_MAX_DATA_BUNDLING 256 892 893/* modular comparison */ 894/* See RFC 1982 for details. */ 895#define SCTP_SSN_GT(a, b) (((a < b) && ((uint16_t)(b - a) > (1U<<15))) || \ 896 ((a > b) && ((uint16_t)(a - b) < (1U<<15)))) 897#define SCTP_SSN_GE(a, b) (SCTP_SSN_GT(a, b) || (a == b)) 898#define SCTP_TSN_GT(a, b) (((a < b) && ((uint32_t)(b - a) > (1U<<31))) || \ 899 ((a > b) && ((uint32_t)(a - b) < (1U<<31)))) 900#define SCTP_TSN_GE(a, b) (SCTP_TSN_GT(a, b) || (a == b)) 901 902/* Mapping array manipulation routines */ 903#define SCTP_IS_TSN_PRESENT(arry, gap) ((arry[(gap >> 3)] >> (gap & 0x07)) & 0x01) 904#define SCTP_SET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] |= (0x01 << ((gap & 0x07)))) 905#define SCTP_UNSET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] &= ((~(0x01 << ((gap & 0x07)))) & 0xff)) 906#define SCTP_CALC_TSN_TO_GAP(gap, tsn, mapping_tsn) do { \ 907 if (tsn >= mapping_tsn) { \ 908 gap = tsn - mapping_tsn; \ 909 } else { \ 910 gap = (MAX_TSN - mapping_tsn) + tsn + 1; \ 911 } \ 912 } while (0) 913 914 915#define SCTP_RETRAN_DONE -1 916#define SCTP_RETRAN_EXIT -2 917 918/* 919 * This value defines the number of vtag block time wait entry's per list 920 * element. Each entry will take 2 4 byte ints (and of course the overhead 921 * of the next pointer as well). Using 15 as an example will yield * ((8 * 922 * 15) + 8) or 128 bytes of overhead for each timewait block that gets 923 * initialized. Increasing it to 31 would yeild 256 bytes per block. 924 */ 925#define SCTP_NUMBER_IN_VTAG_BLOCK 15 926/* 927 * If we use the STACK option, we have an array of this size head pointers. 928 * This array is mod'd the with the size to find which bucket and then all 929 * entries must be searched to see if the tag is in timed wait. If so we 930 * reject it. 931 */ 932#define SCTP_STACK_VTAG_HASH_SIZE 32 933 934/* 935 * Number of seconds of time wait for a vtag. 936 */ 937#define SCTP_TIME_WAIT 60 938 939/* How many micro seconds is the cutoff from 940 * local lan type rtt's 941 */ 942 /* 943 * We allow 900us for the rtt. 944 */ 945#define SCTP_LOCAL_LAN_RTT 900 946#define SCTP_LAN_UNKNOWN 0 947#define SCTP_LAN_LOCAL 1 948#define SCTP_LAN_INTERNET 2 949 950#define SCTP_SEND_BUFFER_SPLITTING 0x00000001 951#define SCTP_RECV_BUFFER_SPLITTING 0x00000002 952 953/* The system retains a cache of free chunks such to 954 * cut down on calls the memory allocation system. There 955 * is a per association limit of free items and a overall 956 * system limit. If either one gets hit then the resource 957 * stops being cached. 958 */ 959 960#define SCTP_DEF_ASOC_RESC_LIMIT 10 961#define SCTP_DEF_SYSTEM_RESC_LIMIT 1000 962 963/*- 964 * defines for socket lock states. 965 * Used by __APPLE__ and SCTP_SO_LOCK_TESTING 966 */ 967#define SCTP_SO_LOCKED 1 968#define SCTP_SO_NOT_LOCKED 0 969 970 971#define SCTP_HOLDS_LOCK 1 972#define SCTP_NOT_LOCKED 0 973 974/*- 975 * For address locks, do we hold the lock? 976 */ 977#define SCTP_ADDR_LOCKED 1 978#define SCTP_ADDR_NOT_LOCKED 0 979 980#define IN4_ISPRIVATE_ADDRESS(a) \ 981 ((((uint8_t *)&(a)->s_addr)[0] == 10) || \ 982 ((((uint8_t *)&(a)->s_addr)[0] == 172) && \ 983 (((uint8_t *)&(a)->s_addr)[1] >= 16) && \ 984 (((uint8_t *)&(a)->s_addr)[1] <= 32)) || \ 985 ((((uint8_t *)&(a)->s_addr)[0] == 192) && \ 986 (((uint8_t *)&(a)->s_addr)[1] == 168))) 987 988#define IN4_ISLOOPBACK_ADDRESS(a) \ 989 ((((uint8_t *)&(a)->s_addr)[0] == 127) && \ 990 (((uint8_t *)&(a)->s_addr)[1] == 0) && \ 991 (((uint8_t *)&(a)->s_addr)[2] == 0) && \ 992 (((uint8_t *)&(a)->s_addr)[3] == 1)) 993 994#define IN4_ISLINKLOCAL_ADDRESS(a) \ 995 ((((uint8_t *)&(a)->s_addr)[0] == 169) && \ 996 (((uint8_t *)&(a)->s_addr)[1] == 254)) 997 998 999#if defined(_KERNEL) 1000#define SCTP_GETTIME_TIMEVAL(x) (getmicrouptime(x)) 1001#define SCTP_GETPTIME_TIMEVAL(x) (microuptime(x)) 1002#endif 1003 1004#if defined(_KERNEL) || defined(__Userspace__) 1005#define sctp_sowwakeup(inp, so) \ 1006do { \ 1007 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \ 1008 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \ 1009 } else { \ 1010 sowwakeup(so); \ 1011 } \ 1012} while (0) 1013 1014#define sctp_sowwakeup_locked(inp, so) \ 1015do { \ 1016 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \ 1017 SOCKBUF_UNLOCK(&((so)->so_snd)); \ 1018 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \ 1019 } else { \ 1020 sowwakeup_locked(so); \ 1021 } \ 1022} while (0) 1023 1024#define sctp_sorwakeup(inp, so) \ 1025do { \ 1026 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \ 1027 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \ 1028 } else { \ 1029 sorwakeup(so); \ 1030 } \ 1031} while (0) 1032 1033#define sctp_sorwakeup_locked(inp, so) \ 1034do { \ 1035 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \ 1036 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \ 1037 SOCKBUF_UNLOCK(&((so)->so_rcv)); \ 1038 } else { \ 1039 sorwakeup_locked(so); \ 1040 } \ 1041} while (0) 1042 1043#endif /* _KERNEL || __Userspace__ */ 1044#endif 1045