1/*-
2 * Copyright (c) 2006 Wojciech A. Koszek <wkoszek@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 * $FreeBSD$
27 */
28#include <sys/cdefs.h>
29__FBSDID("$FreeBSD$");
30
31#include "opt_ddb.h"
32
33#include <sys/param.h>
34#include <sys/conf.h>
35#include <sys/kernel.h>
36#include <sys/systm.h>
37#include <sys/imgact.h>
38#include <sys/bio.h>
39#include <sys/buf.h>
40#include <sys/bus.h>
41#include <sys/cpu.h>
42#include <sys/cons.h>
43#include <sys/exec.h>
44#include <sys/ucontext.h>
45#include <sys/proc.h>
46#include <sys/kdb.h>
47#include <sys/ptrace.h>
48#include <sys/reboot.h>
49#include <sys/signalvar.h>
50#include <sys/sysent.h>
51#include <sys/sysproto.h>
52#include <sys/user.h>
53
54#include <vm/vm.h>
55#include <vm/vm_object.h>
56#include <vm/vm_page.h>
57#include <vm/vm_pager.h>
58
59#include <machine/clock.h>
60#include <machine/cpu.h>
61#include <machine/cpuregs.h>
62#include <machine/hwfunc.h>
63#include <machine/md_var.h>
64#include <machine/pmap.h>
65#include <machine/trap.h>
66
67#ifdef TICK_USE_YAMON_FREQ
68#include <mips/malta/yamon.h>
69#endif
70
71#ifdef TICK_USE_MALTA_RTC
72#include <mips/mips4k/malta/maltareg.h>
73#include <dev/mc146818/mc146818reg.h>
74#include <isa/rtc.h>
75#endif
76
77#include <mips/malta/maltareg.h>
78
79extern int	*edata;
80extern int	*end;
81
82void	lcd_init(void);
83void	lcd_puts(char *);
84void	malta_reset(void);
85
86/*
87 * Offsets to MALTA LCD characters.
88 */
89static int malta_lcd_offs[] = {
90	MALTA_ASCIIPOS0,
91	MALTA_ASCIIPOS1,
92	MALTA_ASCIIPOS2,
93	MALTA_ASCIIPOS3,
94	MALTA_ASCIIPOS4,
95	MALTA_ASCIIPOS5,
96	MALTA_ASCIIPOS6,
97	MALTA_ASCIIPOS7
98};
99
100void
101platform_cpu_init()
102{
103	/* Nothing special */
104}
105
106/*
107 * Put character to Malta LCD at given position.
108 */
109static void
110malta_lcd_putc(int pos, char c)
111{
112	void *addr;
113	char *ch;
114
115	if (pos < 0 || pos > 7)
116		return;
117	addr = (void *)(MALTA_ASCII_BASE + malta_lcd_offs[pos]);
118	ch = (char *)MIPS_PHYS_TO_KSEG0(addr);
119	*ch = c;
120}
121
122/*
123 * Print given string on LCD.
124 */
125static void
126malta_lcd_print(char *str)
127{
128	int i;
129
130	if (str == NULL)
131		return;
132
133	for (i = 0; *str != '\0'; i++, str++)
134		malta_lcd_putc(i, *str);
135}
136
137void
138lcd_init(void)
139{
140	malta_lcd_print("FreeBSD_");
141}
142
143void
144lcd_puts(char *s)
145{
146	malta_lcd_print(s);
147}
148
149#ifdef TICK_USE_MALTA_RTC
150static __inline uint8_t
151rtcin(uint8_t addr)
152{
153
154	*((volatile uint8_t *)
155	    MIPS_PHYS_TO_KSEG1(MALTA_PCI0_ADDR(MALTA_RTCADR))) = addr;
156	return (*((volatile uint8_t *)
157	    MIPS_PHYS_TO_KSEG1(MALTA_PCI0_ADDR(MALTA_RTCDAT))));
158}
159
160static __inline void
161writertc(uint8_t addr, uint8_t val)
162{
163
164	*((volatile uint8_t *)
165	    MIPS_PHYS_TO_KSEG1(MALTA_PCI0_ADDR(MALTA_RTCADR))) = addr;
166	*((volatile uint8_t *)
167	    MIPS_PHYS_TO_KSEG1(MALTA_PCI0_ADDR(MALTA_RTCDAT))) = val;
168}
169#endif
170
171static void
172mips_init(void)
173{
174	int i;
175
176	for (i = 0; i < 10; i++) {
177		phys_avail[i] = 0;
178	}
179
180	/* phys_avail regions are in bytes */
181	phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
182	phys_avail[1] = ctob(realmem);
183
184	dump_avail[0] = phys_avail[0];
185	dump_avail[1] = phys_avail[1];
186
187	physmem = realmem;
188
189	init_param1();
190	init_param2(physmem);
191	mips_cpu_init();
192	pmap_bootstrap();
193	mips_proc0_init();
194	mutex_init();
195	kdb_init();
196#ifdef KDB
197	if (boothowto & RB_KDB)
198		kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
199#endif
200}
201
202void
203platform_halt(void)
204{
205
206}
207
208
209void
210platform_identify(void)
211{
212
213}
214
215/*
216 * Perform a board-level soft-reset.
217 * Note that this is not emulated by gxemul.
218 */
219void
220platform_reset(void)
221{
222	char *c;
223
224	c = (char *)MIPS_PHYS_TO_KSEG0(MALTA_SOFTRES);
225	*c = MALTA_GORESET;
226}
227
228void
229platform_trap_enter(void)
230{
231
232}
233
234void
235platform_trap_exit(void)
236{
237
238}
239
240static uint64_t
241malta_cpu_freq(void)
242{
243	uint64_t platform_counter_freq = 0;
244
245#if defined(TICK_USE_YAMON_FREQ)
246	/*
247	 * If we are running on a board which uses YAMON firmware,
248	 * then query CPU pipeline clock from the syscon object.
249	 * If unsuccessful, use hard-coded default.
250	 */
251	platform_counter_freq = yamon_getcpufreq();
252
253#elif defined(TICK_USE_MALTA_RTC)
254	/*
255	 * If we are running on a board with the MC146818 RTC,
256	 * use it to determine CPU pipeline clock frequency.
257	 */
258	u_int64_t counterval[2];
259
260	/* Set RTC to binary mode. */
261	writertc(RTC_STATUSB, (rtcin(RTC_STATUSB) | RTCSB_BCD));
262
263	/* Busy-wait for falling edge of RTC update. */
264	while (((rtcin(RTC_STATUSA) & RTCSA_TUP) == 0))
265		;
266	while (((rtcin(RTC_STATUSA)& RTCSA_TUP) != 0))
267		;
268	counterval[0] = mips_rd_count();
269
270	/* Busy-wait for falling edge of RTC update. */
271	while (((rtcin(RTC_STATUSA) & RTCSA_TUP) == 0))
272		;
273	while (((rtcin(RTC_STATUSA)& RTCSA_TUP) != 0))
274		;
275	counterval[1] = mips_rd_count();
276
277	platform_counter_freq = counterval[1] - counterval[0];
278#endif
279
280	if (platform_counter_freq == 0)
281		platform_counter_freq = MIPS_DEFAULT_HZ;
282
283	return (platform_counter_freq);
284}
285
286void
287platform_start(__register_t a0, __register_t a1,  __register_t a2,
288    __register_t a3)
289{
290	vm_offset_t kernend;
291	uint64_t platform_counter_freq;
292	int argc = a0;
293	char **argv = (char **)a1;
294	char **envp = (char **)a2;
295	unsigned int memsize = a3;
296	int i;
297
298	/* clear the BSS and SBSS segments */
299	kernend = (vm_offset_t)&end;
300	memset(&edata, 0, kernend - (vm_offset_t)(&edata));
301
302	mips_postboot_fixup();
303
304	mips_pcpu0_init();
305	platform_counter_freq = malta_cpu_freq();
306	mips_timer_early_init(platform_counter_freq);
307
308	cninit();
309	printf("entry: platform_start()\n");
310
311	bootverbose = 1;
312	if (bootverbose) {
313		printf("cmd line: ");
314		for (i = 0; i < argc; i++)
315			printf("%s ", argv[i]);
316		printf("\n");
317
318		printf("envp:\n");
319		for (i = 0; envp[i]; i += 2)
320			printf("\t%s = %s\n", envp[i], envp[i+1]);
321
322		printf("memsize = %08x\n", memsize);
323	}
324
325	realmem = btoc(memsize);
326	mips_init();
327
328	mips_timer_init_params(platform_counter_freq, 0);
329}
330