1/* $FreeBSD$ */ 2/*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27#ifndef _USB_DEVICE_H_ 28#define _USB_DEVICE_H_ 29 30#ifndef USB_GLOBAL_INCLUDE_FILE 31#include <dev/usb/usb_core.h> 32#include <dev/usb/usb_busdma.h> 33#include <dev/usb/usb_transfer.h> 34#endif 35 36struct usb_bus_methods; 37struct usb_config_descriptor; 38struct usb_device; /* linux compat */ 39struct usb_fs_privdata; 40struct usb_hw_ep_profile; 41struct usb_symlink; /* UGEN */ 42 43#define USB_CTRL_XFER_MAX 2 44 45/* "usb_parse_config()" commands */ 46 47#define USB_CFG_ALLOC 0 48#define USB_CFG_FREE 1 49#define USB_CFG_INIT 2 50 51/* "usb_unconfigure()" flags */ 52 53#define USB_UNCFG_FLAG_NONE 0x00 54#define USB_UNCFG_FLAG_FREE_EP0 0x02 /* endpoint zero is freed */ 55 56struct usb_udev_msg { 57 struct usb_proc_msg hdr; 58 struct usb_device *udev; 59}; 60 61/* The following four structures makes up a tree, where we have the 62 * leaf structure, "usb_host_endpoint", first, and the root structure, 63 * "usb_device", last. The four structures below mirror the structure 64 * of the USB descriptors belonging to an USB configuration. Please 65 * refer to the USB specification for a definition of "endpoints" and 66 * "interfaces". 67 */ 68struct usb_host_endpoint { 69 struct usb_endpoint_descriptor desc; 70 TAILQ_HEAD(, urb) bsd_urb_list; 71 struct usb_xfer *bsd_xfer[2]; 72 uint8_t *extra; /* Extra descriptors */ 73 usb_frlength_t fbsd_buf_size; 74 uint16_t extralen; 75 uint8_t bsd_iface_index; 76} __aligned(USB_HOST_ALIGN); 77 78struct usb_host_interface { 79 struct usb_interface_descriptor desc; 80 /* the following array has size "desc.bNumEndpoint" */ 81 struct usb_host_endpoint *endpoint; 82 const char *string; /* iInterface string, if present */ 83 uint8_t *extra; /* Extra descriptors */ 84 uint16_t extralen; 85 uint8_t bsd_iface_index; 86} __aligned(USB_HOST_ALIGN); 87 88/* 89 * The following structure defines the USB device flags. 90 */ 91struct usb_device_flags { 92 enum usb_hc_mode usb_mode; /* host or device mode */ 93 uint8_t self_powered:1; /* set if USB device is self powered */ 94 uint8_t no_strings:1; /* set if USB device does not support 95 * strings */ 96 uint8_t remote_wakeup:1; /* set if remote wakeup is enabled */ 97 uint8_t uq_bus_powered:1; /* set if BUS powered quirk is present */ 98 99 /* 100 * NOTE: Although the flags below will reach the same value 101 * over time, but the instant values may differ, and 102 * consequently the flags cannot be merged into one! 103 */ 104 uint8_t peer_suspended:1; /* set if peer is suspended */ 105 uint8_t self_suspended:1; /* set if self is suspended */ 106}; 107 108/* 109 * The following structure is used for power-save purposes. The data 110 * in this structure is protected by the USB BUS lock. 111 */ 112struct usb_power_save { 113 usb_ticks_t last_xfer_time; /* copy of "ticks" */ 114 usb_size_t type_refs[4]; /* transfer reference count */ 115 usb_size_t read_refs; /* data read references */ 116 usb_size_t write_refs; /* data write references */ 117}; 118 119/* 120 * The following structure is used when trying to allocate hardware 121 * endpoints for an USB configuration in USB device side mode. 122 */ 123struct usb_hw_ep_scratch_sub { 124 const struct usb_hw_ep_profile *pf; 125 uint16_t max_frame_size; 126 uint8_t hw_endpoint_out; 127 uint8_t hw_endpoint_in; 128 uint8_t needs_ep_type; 129 uint8_t needs_in:1; 130 uint8_t needs_out:1; 131}; 132 133/* 134 * The following structure is used when trying to allocate hardware 135 * endpoints for an USB configuration in USB device side mode. 136 */ 137struct usb_hw_ep_scratch { 138 struct usb_hw_ep_scratch_sub ep[USB_EP_MAX]; 139 struct usb_hw_ep_scratch_sub *ep_max; 140 struct usb_config_descriptor *cd; 141 struct usb_device *udev; 142 struct usb_bus_methods *methods; 143 uint8_t bmOutAlloc[(USB_EP_MAX + 15) / 16]; 144 uint8_t bmInAlloc[(USB_EP_MAX + 15) / 16]; 145}; 146 147/* 148 * The following structure is used when generating USB descriptors 149 * from USB templates. 150 */ 151struct usb_temp_setup { 152 void *buf; 153 usb_size_t size; 154 enum usb_dev_speed usb_speed; 155 uint8_t self_powered; 156 uint8_t bNumEndpoints; 157 uint8_t bInterfaceNumber; 158 uint8_t bAlternateSetting; 159 uint8_t bConfigurationValue; 160 usb_error_t err; 161}; 162 163/* 164 * The scratch area for USB devices. Access to this structure is 165 * protected by the enumeration SX lock. 166 */ 167union usb_device_scratch { 168 struct usb_hw_ep_scratch hw_ep_scratch[1]; 169 struct usb_temp_setup temp_setup[1]; 170 struct { 171 struct usb_xfer dummy; 172 struct usb_setup_params parm; 173 } xfer_setup[1]; 174 uint8_t data[255]; 175}; 176 177/* 178 * The following structure defines an USB device. There exists one of 179 * these structures for every USB device. 180 */ 181struct usb_device { 182 /* generic clear stall message */ 183 struct usb_udev_msg cs_msg[2]; 184 struct sx enum_sx; 185 struct sx sr_sx; 186 struct mtx device_mtx; 187 struct cv ctrlreq_cv; 188 struct cv ref_cv; 189 struct usb_interface *ifaces; 190 struct usb_endpoint ctrl_ep; /* Control Endpoint 0 */ 191 struct usb_endpoint *endpoints; 192 struct usb_power_save pwr_save;/* power save data */ 193 struct usb_bus *bus; /* our USB BUS */ 194 device_t parent_dev; /* parent device */ 195 struct usb_device *parent_hub; 196 struct usb_device *parent_hs_hub; /* high-speed parent HUB */ 197 struct usb_config_descriptor *cdesc; /* full config descr */ 198 struct usb_hub *hub; /* only if this is a hub */ 199 struct usb_xfer *ctrl_xfer[USB_CTRL_XFER_MAX]; 200 struct usb_temp_data *usb_template_ptr; 201 struct usb_endpoint *ep_curr; /* current clear stall endpoint */ 202#if USB_HAVE_UGEN 203 struct usb_fifo *fifo[USB_FIFO_MAX]; 204 struct usb_symlink *ugen_symlink; /* our generic symlink */ 205 struct usb_fs_privdata *ctrl_dev; /* Control Endpoint 0 device node */ 206 LIST_HEAD(,usb_fs_privdata) pd_list; 207 char ugen_name[20]; /* name of ugenX.X device */ 208#endif 209 usb_ticks_t plugtime; /* copy of "ticks" */ 210 211 enum usb_dev_state state; 212 enum usb_dev_speed speed; 213 uint16_t refcount; 214#define USB_DEV_REF_MAX 0xffff 215 216 uint16_t power; /* mA the device uses */ 217 uint16_t langid; /* language for strings */ 218 uint16_t autoQuirk[USB_MAX_AUTO_QUIRK]; /* dynamic quirks */ 219 220 uint8_t address; /* device addess */ 221 uint8_t device_index; /* device index in "bus->devices" */ 222 uint8_t controller_slot_id; /* controller specific value */ 223 uint8_t next_config_index; /* used by USB_RE_ENUM_SET_CONFIG */ 224 uint8_t curr_config_index; /* current configuration index */ 225 uint8_t curr_config_no; /* current configuration number */ 226 uint8_t depth; /* distance from root HUB */ 227 uint8_t port_index; /* parent HUB port index */ 228 uint8_t port_no; /* parent HUB port number */ 229 uint8_t hs_hub_addr; /* high-speed HUB address */ 230 uint8_t hs_port_no; /* high-speed HUB port number */ 231 uint8_t driver_added_refcount; /* our driver added generation count */ 232 uint8_t power_mode; /* see USB_POWER_XXX */ 233 uint8_t re_enumerate_wait; /* set if re-enum. is in progress */ 234#define USB_RE_ENUM_DONE 0 235#define USB_RE_ENUM_START 1 236#define USB_RE_ENUM_PWR_OFF 2 237#define USB_RE_ENUM_SET_CONFIG 3 238 uint8_t ifaces_max; /* number of interfaces present */ 239 uint8_t endpoints_max; /* number of endpoints present */ 240 241 /* the "flags" field is write-protected by "bus->mtx" */ 242 243 struct usb_device_flags flags; 244 245 struct usb_endpoint_descriptor ctrl_ep_desc; /* for endpoint 0 */ 246 struct usb_endpoint_ss_comp_descriptor ctrl_ep_comp_desc; /* for endpoint 0 */ 247 struct usb_device_descriptor ddesc; /* device descriptor */ 248 249 char *serial; /* serial number, can be NULL */ 250 char *manufacturer; /* manufacturer string, can be NULL */ 251 char *product; /* product string, can be NULL */ 252 253#if USB_HAVE_COMPAT_LINUX 254 /* Linux compat */ 255 struct usb_device_descriptor descriptor; 256 struct usb_host_endpoint ep0; 257 struct usb_interface *linux_iface_start; 258 struct usb_interface *linux_iface_end; 259 struct usb_host_endpoint *linux_endpoint_start; 260 struct usb_host_endpoint *linux_endpoint_end; 261 uint16_t devnum; 262#endif 263 264 uint32_t clear_stall_errors; /* number of clear-stall failures */ 265 266 union usb_device_scratch scratch; 267}; 268 269/* globals */ 270 271extern int usb_template; 272 273/* function prototypes */ 274 275const char *usb_statestr(enum usb_dev_state state); 276struct usb_device *usb_alloc_device(device_t parent_dev, struct usb_bus *bus, 277 struct usb_device *parent_hub, uint8_t depth, 278 uint8_t port_index, uint8_t port_no, 279 enum usb_dev_speed speed, enum usb_hc_mode mode); 280#if USB_HAVE_UGEN 281struct usb_fs_privdata *usb_make_dev(struct usb_device *, const char *, 282 int, int, int, uid_t, gid_t, int); 283void usb_destroy_dev(struct usb_fs_privdata *); 284#endif 285usb_error_t usb_probe_and_attach(struct usb_device *udev, 286 uint8_t iface_index); 287void usb_detach_device(struct usb_device *, uint8_t, uint8_t); 288usb_error_t usb_reset_iface_endpoints(struct usb_device *udev, 289 uint8_t iface_index); 290usb_error_t usbd_set_config_index(struct usb_device *udev, uint8_t index); 291usb_error_t usbd_set_endpoint_stall(struct usb_device *udev, 292 struct usb_endpoint *ep, uint8_t do_stall); 293usb_error_t usb_suspend_resume(struct usb_device *udev, 294 uint8_t do_suspend); 295void usb_devinfo(struct usb_device *udev, char *dst_ptr, uint16_t dst_len); 296void usb_free_device(struct usb_device *, uint8_t); 297void usb_linux_free_device(struct usb_device *dev); 298uint8_t usb_peer_can_wakeup(struct usb_device *udev); 299struct usb_endpoint *usb_endpoint_foreach(struct usb_device *udev, struct usb_endpoint *ep); 300void usb_set_device_state(struct usb_device *, enum usb_dev_state); 301enum usb_dev_state usb_get_device_state(struct usb_device *); 302 303uint8_t usbd_enum_lock(struct usb_device *); 304void usbd_enum_unlock(struct usb_device *); 305void usbd_sr_lock(struct usb_device *); 306void usbd_sr_unlock(struct usb_device *); 307uint8_t usbd_enum_is_locked(struct usb_device *); 308 309#if USB_HAVE_TT_SUPPORT 310void uhub_tt_buffer_reset_async_locked(struct usb_device *, struct usb_endpoint *); 311#endif 312 313uint8_t uhub_count_active_host_ports(struct usb_device *, enum usb_dev_speed); 314 315#endif /* _USB_DEVICE_H_ */ 316