1/*- 2 * Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010 3 * PCI-SCSI controllers. 4 * 5 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> 6 * 7 * This driver also supports the following Symbios/LSI PCI-SCSI chips: 8 * 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895, 9 * 53C810, 53C815, 53C825 and the 53C1510D is 53C8XX mode. 10 * 11 * 12 * This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver. 13 * Copyright (C) 1998-1999 Gerard Roudier 14 * 15 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 16 * a port of the FreeBSD ncr driver to Linux-1.2.13. 17 * 18 * The original ncr driver has been written for 386bsd and FreeBSD by 19 * Wolfgang Stanglmeier <wolf@cologne.de> 20 * Stefan Esser <se@mi.Uni-Koeln.de> 21 * Copyright (C) 1994 Wolfgang Stanglmeier 22 * 23 * The initialisation code, and part of the code that addresses 24 * FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM 25 * written by Justin T. Gibbs. 26 * 27 * Other major contributions: 28 * 29 * NVRAM detection and reading. 30 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> 31 * 32 *----------------------------------------------------------------------------- 33 * 34 * Redistribution and use in source and binary forms, with or without 35 * modification, are permitted provided that the following conditions 36 * are met: 37 * 1. Redistributions of source code must retain the above copyright 38 * notice, this list of conditions and the following disclaimer. 39 * 2. Redistributions in binary form must reproduce the above copyright 40 * notice, this list of conditions and the following disclaimer in the 41 * documentation and/or other materials provided with the distribution. 42 * 3. The name of the author may not be used to endorse or promote products 43 * derived from this software without specific prior written permission. 44 * 45 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND 46 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 47 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 48 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 49 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 50 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 51 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 52 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 53 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 54 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 55 * SUCH DAMAGE. 56 */ 57 58/* $FreeBSD$ */ 59 60/* 61 * Scripts for SYMBIOS-Processor 62 * 63 * We have to know the offsets of all labels before we reach 64 * them (for forward jumps). Therefore we declare a struct 65 * here. If you make changes inside the script, 66 * 67 * DONT FORGET TO CHANGE THE LENGTHS HERE! 68 */ 69 70/* 71 * Script fragments which are loaded into the on-chip RAM 72 * of 825A, 875, 876, 895, 895A, 896 and 1010 chips. 73 * Must not exceed 4K bytes. 74 */ 75struct SYM_FWA_SCR { 76 u32 start [ 11]; 77 u32 getjob_begin [ 4]; 78 u32 _sms_a10 [ 5]; 79 u32 getjob_end [ 4]; 80 u32 _sms_a20 [ 4]; 81 u32 select [ 8]; 82 u32 _sms_a30 [ 8]; 83 u32 wf_sel_done [ 2]; 84 u32 send_ident [ 2]; 85#ifdef SYM_CONF_IARB_SUPPORT 86 u32 select2 [ 8]; 87#else 88 u32 select2 [ 2]; 89#endif 90 u32 command [ 2]; 91 u32 dispatch [ 28]; 92 u32 sel_no_cmd [ 10]; 93 u32 init [ 6]; 94 u32 clrack [ 4]; 95 u32 disp_status [ 4]; 96 u32 datai_done [ 26]; 97 u32 datao_done [ 12]; 98 u32 datai_phase [ 2]; 99 u32 datao_phase [ 2]; 100 u32 msg_in [ 2]; 101 u32 msg_in2 [ 10]; 102#ifdef SYM_CONF_IARB_SUPPORT 103 u32 status [ 14]; 104#else 105 u32 status [ 10]; 106#endif 107 u32 complete [ 9]; 108 u32 complete2 [ 8]; 109 u32 _sms_a40 [ 12]; 110 u32 complete_error [ 5]; 111 u32 done [ 5]; 112 u32 _sms_a50 [ 5]; 113 u32 _sms_a60 [ 2]; 114 u32 done_end [ 4]; 115 u32 save_dp [ 9]; 116 u32 restore_dp [ 5]; 117 u32 disconnect [ 20]; 118 u32 disconnect2 [ 5]; 119 u32 _sms_a65 [ 3]; 120#ifdef SYM_CONF_IARB_SUPPORT 121 u32 idle [ 4]; 122#else 123 u32 idle [ 2]; 124#endif 125#ifdef SYM_CONF_IARB_SUPPORT 126 u32 ungetjob [ 7]; 127#else 128 u32 ungetjob [ 5]; 129#endif 130 u32 reselect [ 4]; 131 u32 reselected [ 19]; 132 u32 _sms_a70 [ 6]; 133 u32 _sms_a80 [ 4]; 134 u32 reselected1 [ 25]; 135 u32 _sms_a90 [ 4]; 136 u32 resel_lun0 [ 7]; 137 u32 _sms_a100 [ 4]; 138 u32 resel_tag [ 8]; 139#if SYM_CONF_MAX_TASK*4 > 512 140 u32 _sms_a110 [ 23]; 141#elif SYM_CONF_MAX_TASK*4 > 256 142 u32 _sms_a110 [ 17]; 143#else 144 u32 _sms_a110 [ 13]; 145#endif 146 u32 _sms_a120 [ 2]; 147 u32 resel_go [ 4]; 148 u32 _sms_a130 [ 7]; 149 u32 resel_dsa [ 2]; 150 u32 resel_dsa1 [ 4]; 151 u32 _sms_a140 [ 10]; 152 u32 resel_no_tag [ 4]; 153 u32 _sms_a145 [ 7]; 154 u32 data_in [SYM_CONF_MAX_SG * 2]; 155 u32 data_in2 [ 4]; 156 u32 data_out [SYM_CONF_MAX_SG * 2]; 157 u32 data_out2 [ 4]; 158 u32 pm0_data [ 12]; 159 u32 pm0_data_out [ 6]; 160 u32 pm0_data_end [ 7]; 161 u32 pm_data_end [ 4]; 162 u32 _sms_a150 [ 4]; 163 u32 pm1_data [ 12]; 164 u32 pm1_data_out [ 6]; 165 u32 pm1_data_end [ 9]; 166}; 167 168/* 169 * Script fragments which stay in main memory for all chips 170 * except for chips that support 8K on-chip RAM. 171 */ 172struct SYM_FWB_SCR { 173 u32 no_data [ 2]; 174 u32 sel_for_abort [ 18]; 175 u32 sel_for_abort_1 [ 2]; 176 u32 msg_in_etc [ 12]; 177 u32 msg_received [ 5]; 178 u32 msg_weird_seen [ 5]; 179 u32 msg_extended [ 17]; 180 u32 _sms_b10 [ 4]; 181 u32 msg_bad [ 6]; 182 u32 msg_weird [ 4]; 183 u32 msg_weird1 [ 8]; 184 u32 wdtr_resp [ 6]; 185 u32 send_wdtr [ 4]; 186 u32 sdtr_resp [ 6]; 187 u32 send_sdtr [ 4]; 188 u32 ppr_resp [ 6]; 189 u32 send_ppr [ 4]; 190 u32 nego_bad_phase [ 4]; 191 u32 msg_out [ 4]; 192 u32 msg_out_done [ 4]; 193 u32 data_ovrun [ 3]; 194 u32 data_ovrun1 [ 22]; 195 u32 data_ovrun2 [ 8]; 196 u32 abort_resel [ 16]; 197 u32 resend_ident [ 4]; 198 u32 ident_break [ 4]; 199 u32 ident_break_atn [ 4]; 200 u32 sdata_in [ 6]; 201 u32 resel_bad_lun [ 4]; 202 u32 bad_i_t_l [ 4]; 203 u32 bad_i_t_l_q [ 4]; 204 u32 bad_status [ 7]; 205 u32 wsr_ma_helper [ 4]; 206 207 /* Data area */ 208 u32 zero [ 1]; 209 u32 scratch [ 1]; 210 u32 scratch1 [ 1]; 211 u32 prev_done [ 1]; 212 u32 done_pos [ 1]; 213 u32 nextjob [ 1]; 214 u32 startpos [ 1]; 215 u32 targtbl [ 1]; 216 /* End of data area */ 217 218 u32 snooptest [ 9]; 219 u32 snoopend [ 2]; 220}; 221 222static const struct SYM_FWA_SCR SYM_FWA_SCR = { 223/*--------------------------< START >----------------------------*/ { 224 /* 225 * Switch the LED on. 226 * Will be patched with a NO_OP if LED 227 * not needed or not desired. 228 */ 229 SCR_REG_REG (gpreg, SCR_AND, 0xfe), 230 0, 231 /* 232 * Clear SIGP. 233 */ 234 SCR_FROM_REG (ctest2), 235 0, 236 /* 237 * Stop here if the C code wants to perform 238 * some error recovery procedure manually. 239 * (Indicate this by setting SEM in ISTAT) 240 */ 241 SCR_FROM_REG (istat), 242 0, 243 /* 244 * Report to the C code the next position in 245 * the start queue the SCRIPTS will schedule. 246 * The C code must not change SCRATCHA. 247 */ 248 SCR_COPY (4), 249 PADDR_B (startpos), 250 RADDR_1 (scratcha), 251 SCR_INT ^ IFTRUE (MASK (SEM, SEM)), 252 SIR_SCRIPT_STOPPED, 253 /* 254 * Start the next job. 255 * 256 * @DSA = start point for this job. 257 * SCRATCHA = address of this job in the start queue. 258 * 259 * We will restore startpos with SCRATCHA if we fails the 260 * arbitration or if it is the idle job. 261 * 262 * The below GETJOB_BEGIN to GETJOB_END section of SCRIPTS 263 * is a critical path. If it is partially executed, it then 264 * may happen that the job address is not yet in the DSA 265 * and the next queue position points to the next JOB. 266 */ 267}/*-------------------------< GETJOB_BEGIN >---------------------*/,{ 268 /* 269 * Copy to a fixed location both the next STARTPOS 270 * and the current JOB address, using self modifying 271 * SCRIPTS. 272 */ 273 SCR_COPY (4), 274 RADDR_1 (scratcha), 275 PADDR_A (_sms_a10), 276 SCR_COPY (8), 277}/*-------------------------< _SMS_A10 >-------------------------*/,{ 278 0, 279 PADDR_B (nextjob), 280 /* 281 * Move the start address to TEMP using self- 282 * modifying SCRIPTS and jump indirectly to 283 * that address. 284 */ 285 SCR_COPY (4), 286 PADDR_B (nextjob), 287 RADDR_1 (dsa), 288}/*-------------------------< GETJOB_END >-----------------------*/,{ 289 SCR_COPY (4), 290 RADDR_1 (dsa), 291 PADDR_A (_sms_a20), 292 SCR_COPY (4), 293}/*-------------------------< _SMS_A20 >-------------------------*/,{ 294 0, 295 RADDR_1 (temp), 296 SCR_RETURN, 297 0, 298}/*-------------------------< SELECT >---------------------------*/,{ 299 /* 300 * DSA contains the address of a scheduled 301 * data structure. 302 * 303 * SCRATCHA contains the address of the start queue 304 * entry which points to the next job. 305 * 306 * Set Initiator mode. 307 * 308 * (Target mode is left as an exercise for the reader) 309 */ 310 SCR_CLR (SCR_TRG), 311 0, 312 /* 313 * And try to select this target. 314 */ 315 SCR_SEL_TBL_ATN ^ offsetof (struct sym_dsb, select), 316 PADDR_A (ungetjob), 317 /* 318 * Now there are 4 possibilities: 319 * 320 * (1) The chip loses arbitration. 321 * This is ok, because it will try again, 322 * when the bus becomes idle. 323 * (But beware of the timeout function!) 324 * 325 * (2) The chip is reselected. 326 * Then the script processor takes the jump 327 * to the RESELECT label. 328 * 329 * (3) The chip wins arbitration. 330 * Then it will execute SCRIPTS instruction until 331 * the next instruction that checks SCSI phase. 332 * Then will stop and wait for selection to be 333 * complete or selection time-out to occur. 334 * 335 * After having won arbitration, the SCRIPTS 336 * processor is able to execute instructions while 337 * the SCSI core is performing SCSI selection. 338 */ 339 340 /* 341 * Copy the CCB header to a fixed location 342 * in the HCB using self-modifying SCRIPTS. 343 */ 344 SCR_COPY (4), 345 RADDR_1 (dsa), 346 PADDR_A (_sms_a30), 347 SCR_COPY (sizeof(struct sym_ccbh)), 348}/*-------------------------< _SMS_A30 >-------------------------*/,{ 349 0, 350 HADDR_1 (ccb_head), 351 /* 352 * Load the savep (saved data pointer) into 353 * the actual data pointer. 354 */ 355 SCR_COPY (4), 356 HADDR_1 (ccb_head.savep), 357 RADDR_1 (temp), 358 /* 359 * Initialize the status register 360 */ 361 SCR_COPY (4), 362 HADDR_1 (ccb_head.status), 363 RADDR_1 (scr0), 364}/*-------------------------< WF_SEL_DONE >----------------------*/,{ 365 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)), 366 SIR_SEL_ATN_NO_MSG_OUT, 367}/*-------------------------< SEND_IDENT >-----------------------*/,{ 368 /* 369 * Selection complete. 370 * Send the IDENTIFY and possibly the TAG message 371 * and negotiation message if present. 372 */ 373 SCR_MOVE_TBL ^ SCR_MSG_OUT, 374 offsetof (struct sym_dsb, smsg), 375}/*-------------------------< SELECT2 >--------------------------*/,{ 376#ifdef SYM_CONF_IARB_SUPPORT 377 /* 378 * Set IMMEDIATE ARBITRATION if we have been given 379 * a hint to do so. (Some job to do after this one). 380 */ 381 SCR_FROM_REG (HF_REG), 382 0, 383 SCR_JUMPR ^ IFFALSE (MASK (HF_HINT_IARB, HF_HINT_IARB)), 384 8, 385 SCR_REG_REG (scntl1, SCR_OR, IARB), 386 0, 387#endif 388 /* 389 * Anticipate the COMMAND phase. 390 * This is the PHASE we expect at this point. 391 */ 392 SCR_JUMP ^ IFFALSE (WHEN (SCR_COMMAND)), 393 PADDR_A (sel_no_cmd), 394}/*-------------------------< COMMAND >--------------------------*/,{ 395 /* 396 * ... and send the command 397 */ 398 SCR_MOVE_TBL ^ SCR_COMMAND, 399 offsetof (struct sym_dsb, cmd), 400}/*-------------------------< DISPATCH >-------------------------*/,{ 401 /* 402 * MSG_IN is the only phase that shall be 403 * entered at least once for each (re)selection. 404 * So we test it first. 405 */ 406 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), 407 PADDR_A (msg_in), 408 SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT)), 409 PADDR_A (datao_phase), 410 SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN)), 411 PADDR_A (datai_phase), 412 SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)), 413 PADDR_A (status), 414 SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)), 415 PADDR_A (command), 416 SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)), 417 PADDR_B (msg_out), 418 /* 419 * Discard as many illegal phases as 420 * required and tell the C code about. 421 */ 422 SCR_JUMPR ^ IFFALSE (WHEN (SCR_ILG_OUT)), 423 16, 424 SCR_MOVE_ABS (1) ^ SCR_ILG_OUT, 425 HADDR_1 (scratch), 426 SCR_JUMPR ^ IFTRUE (WHEN (SCR_ILG_OUT)), 427 -16, 428 SCR_JUMPR ^ IFFALSE (WHEN (SCR_ILG_IN)), 429 16, 430 SCR_MOVE_ABS (1) ^ SCR_ILG_IN, 431 HADDR_1 (scratch), 432 SCR_JUMPR ^ IFTRUE (WHEN (SCR_ILG_IN)), 433 -16, 434 SCR_INT, 435 SIR_BAD_PHASE, 436 SCR_JUMP, 437 PADDR_A (dispatch), 438}/*-------------------------< SEL_NO_CMD >-----------------------*/,{ 439 /* 440 * The target does not switch to command 441 * phase after IDENTIFY has been sent. 442 * 443 * If it stays in MSG OUT phase send it 444 * the IDENTIFY again. 445 */ 446 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), 447 PADDR_B (resend_ident), 448 /* 449 * If target does not switch to MSG IN phase 450 * and we sent a negotiation, assert the 451 * failure immediately. 452 */ 453 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), 454 PADDR_A (dispatch), 455 SCR_FROM_REG (HS_REG), 456 0, 457 SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), 458 SIR_NEGO_FAILED, 459 /* 460 * Jump to dispatcher. 461 */ 462 SCR_JUMP, 463 PADDR_A (dispatch), 464}/*-------------------------< INIT >-----------------------------*/,{ 465 /* 466 * Wait for the SCSI RESET signal to be 467 * inactive before restarting operations, 468 * since the chip may hang on SEL_ATN 469 * if SCSI RESET is active. 470 */ 471 SCR_FROM_REG (sstat0), 472 0, 473 SCR_JUMPR ^ IFTRUE (MASK (IRST, IRST)), 474 -16, 475 SCR_JUMP, 476 PADDR_A (start), 477}/*-------------------------< CLRACK >---------------------------*/,{ 478 /* 479 * Terminate possible pending message phase. 480 */ 481 SCR_CLR (SCR_ACK), 482 0, 483 SCR_JUMP, 484 PADDR_A (dispatch), 485}/*-------------------------< DISP_STATUS >----------------------*/,{ 486 /* 487 * Anticipate STATUS phase. 488 * 489 * Does spare 3 SCRIPTS instructions when we have 490 * completed the INPUT of the data. 491 */ 492 SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)), 493 PADDR_A (status), 494 SCR_JUMP, 495 PADDR_A (dispatch), 496}/*-------------------------< DATAI_DONE >-----------------------*/,{ 497 /* 498 * If the device still wants to send us data, 499 * we must count the extra bytes. 500 */ 501 SCR_JUMP ^ IFTRUE (WHEN (SCR_DATA_IN)), 502 PADDR_B (data_ovrun), 503 /* 504 * If the SWIDE is not full, jump to dispatcher. 505 * We anticipate a STATUS phase. 506 */ 507 SCR_FROM_REG (scntl2), 508 0, 509 SCR_JUMP ^ IFFALSE (MASK (WSR, WSR)), 510 PADDR_A (disp_status), 511 /* 512 * The SWIDE is full. 513 * Clear this condition. 514 */ 515 SCR_REG_REG (scntl2, SCR_OR, WSR), 516 0, 517 /* 518 * We are expecting an IGNORE RESIDUE message 519 * from the device, otherwise we are in data 520 * overrun condition. Check against MSG_IN phase. 521 */ 522 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), 523 SIR_SWIDE_OVERRUN, 524 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 525 PADDR_A (disp_status), 526 /* 527 * We are in MSG_IN phase, 528 * Read the first byte of the message. 529 * If it is not an IGNORE RESIDUE message, 530 * signal overrun and jump to message 531 * processing. 532 */ 533 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 534 HADDR_1 (msgin[0]), 535 SCR_INT ^ IFFALSE (DATA (M_IGN_RESIDUE)), 536 SIR_SWIDE_OVERRUN, 537 SCR_JUMP ^ IFFALSE (DATA (M_IGN_RESIDUE)), 538 PADDR_A (msg_in2), 539 /* 540 * We got the message we expected. 541 * Read the 2nd byte, and jump to dispatcher. 542 */ 543 SCR_CLR (SCR_ACK), 544 0, 545 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 546 HADDR_1 (msgin[1]), 547 SCR_CLR (SCR_ACK), 548 0, 549 SCR_JUMP, 550 PADDR_A (disp_status), 551}/*-------------------------< DATAO_DONE >-----------------------*/,{ 552 /* 553 * If the device wants us to send more data, 554 * we must count the extra bytes. 555 */ 556 SCR_JUMP ^ IFTRUE (WHEN (SCR_DATA_OUT)), 557 PADDR_B (data_ovrun), 558 /* 559 * If the SODL is not full jump to dispatcher. 560 * We anticipate a STATUS phase. 561 */ 562 SCR_FROM_REG (scntl2), 563 0, 564 SCR_JUMP ^ IFFALSE (MASK (WSS, WSS)), 565 PADDR_A (disp_status), 566 /* 567 * The SODL is full, clear this condition. 568 */ 569 SCR_REG_REG (scntl2, SCR_OR, WSS), 570 0, 571 /* 572 * And signal a DATA UNDERRUN condition 573 * to the C code. 574 */ 575 SCR_INT, 576 SIR_SODL_UNDERRUN, 577 SCR_JUMP, 578 PADDR_A (dispatch), 579}/*-------------------------< DATAI_PHASE >----------------------*/,{ 580 SCR_RETURN, 581 0, 582}/*-------------------------< DATAO_PHASE >----------------------*/,{ 583 SCR_RETURN, 584 0, 585}/*-------------------------< MSG_IN >---------------------------*/,{ 586 /* 587 * Get the first byte of the message. 588 * 589 * The script processor doesn't negate the 590 * ACK signal after this transfer. 591 */ 592 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 593 HADDR_1 (msgin[0]), 594}/*-------------------------< MSG_IN2 >--------------------------*/,{ 595 /* 596 * Check first against 1 byte messages 597 * that we handle from SCRIPTS. 598 */ 599 SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)), 600 PADDR_A (complete), 601 SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)), 602 PADDR_A (disconnect), 603 SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)), 604 PADDR_A (save_dp), 605 SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)), 606 PADDR_A (restore_dp), 607 /* 608 * We handle all other messages from the 609 * C code, so no need to waste on-chip RAM 610 * for those ones. 611 */ 612 SCR_JUMP, 613 PADDR_B (msg_in_etc), 614}/*-------------------------< STATUS >---------------------------*/,{ 615 /* 616 * get the status 617 */ 618 SCR_MOVE_ABS (1) ^ SCR_STATUS, 619 HADDR_1 (scratch), 620#ifdef SYM_CONF_IARB_SUPPORT 621 /* 622 * If STATUS is not GOOD, clear IMMEDIATE ARBITRATION, 623 * since we may have to tamper the start queue from 624 * the C code. 625 */ 626 SCR_JUMPR ^ IFTRUE (DATA (S_GOOD)), 627 8, 628 SCR_REG_REG (scntl1, SCR_AND, ~IARB), 629 0, 630#endif 631 /* 632 * save status to scsi_status. 633 * mark as complete. 634 */ 635 SCR_TO_REG (SS_REG), 636 0, 637 SCR_LOAD_REG (HS_REG, HS_COMPLETE), 638 0, 639 /* 640 * Anticipate the MESSAGE PHASE for 641 * the TASK COMPLETE message. 642 */ 643 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), 644 PADDR_A (msg_in), 645 SCR_JUMP, 646 PADDR_A (dispatch), 647}/*-------------------------< COMPLETE >-------------------------*/,{ 648 /* 649 * Complete message. 650 * 651 * Copy the data pointer to LASTP. 652 */ 653 SCR_COPY (4), 654 RADDR_1 (temp), 655 HADDR_1 (ccb_head.lastp), 656 /* 657 * When we terminate the cycle by clearing ACK, 658 * the target may disconnect immediately. 659 * 660 * We don't want to be told of an "unexpected disconnect", 661 * so we disable this feature. 662 */ 663 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 664 0, 665 /* 666 * Terminate cycle ... 667 */ 668 SCR_CLR (SCR_ACK|SCR_ATN), 669 0, 670 /* 671 * ... and wait for the disconnect. 672 */ 673 SCR_WAIT_DISC, 674 0, 675}/*-------------------------< COMPLETE2 >------------------------*/,{ 676 /* 677 * Save host status. 678 */ 679 SCR_COPY (4), 680 RADDR_1 (scr0), 681 HADDR_1 (ccb_head.status), 682 /* 683 * Move back the CCB header using self-modifying 684 * SCRIPTS. 685 */ 686 SCR_COPY (4), 687 RADDR_1 (dsa), 688 PADDR_A (_sms_a40), 689 SCR_COPY (sizeof(struct sym_ccbh)), 690 HADDR_1 (ccb_head), 691}/*-------------------------< _SMS_A40 >-------------------------*/,{ 692 0, 693 /* 694 * Some bridges may reorder DMA writes to memory. 695 * We donnot want the CPU to deal with completions 696 * without all the posted write having been flushed 697 * to memory. This DUMMY READ should flush posted 698 * buffers prior to the CPU having to deal with 699 * completions. 700 */ 701 SCR_COPY (4), /* DUMMY READ */ 702 HADDR_1 (ccb_head.status), 703 RADDR_1 (scr0), 704 /* 705 * If command resulted in not GOOD status, 706 * call the C code if needed. 707 */ 708 SCR_FROM_REG (SS_REG), 709 0, 710 SCR_CALL ^ IFFALSE (DATA (S_GOOD)), 711 PADDR_B (bad_status), 712 /* 713 * If we performed an auto-sense, call 714 * the C code to synchronyze task aborts 715 * with UNIT ATTENTION conditions. 716 */ 717 SCR_FROM_REG (HF_REG), 718 0, 719 SCR_JUMP ^ IFTRUE (MASK (0 ,(HF_SENSE|HF_EXT_ERR))), 720 PADDR_A (done), 721}/*-------------------------< COMPLETE_ERROR >-------------------*/,{ 722 SCR_COPY (4), 723 PADDR_B (startpos), 724 RADDR_1 (scratcha), 725 SCR_INT, 726 SIR_COMPLETE_ERROR, 727}/*-------------------------< DONE >-----------------------------*/,{ 728 /* 729 * Copy the DSA to the DONE QUEUE and 730 * signal completion to the host. 731 * If we are interrupted between DONE 732 * and DONE_END, we must reset, otherwise 733 * the completed CCB may be lost. 734 */ 735 SCR_COPY (4), 736 PADDR_B (done_pos), 737 PADDR_A (_sms_a50), 738 SCR_COPY (4), 739 RADDR_1 (dsa), 740}/*-------------------------< _SMS_A50 >-------------------------*/,{ 741 0, 742 SCR_COPY (4), 743 PADDR_B (done_pos), 744 PADDR_A (_sms_a60), 745 /* 746 * The instruction below reads the DONE QUEUE next 747 * free position from memory. 748 * In addition it ensures that all PCI posted writes 749 * are flushed and so the DSA value of the done 750 * CCB is visible by the CPU before INTFLY is raised. 751 */ 752 SCR_COPY (8), 753}/*-------------------------< _SMS_A60 >-------------------------*/,{ 754 0, 755 PADDR_B (prev_done), 756}/*-------------------------< DONE_END >-------------------------*/,{ 757 SCR_INT_FLY, 758 0, 759 SCR_JUMP, 760 PADDR_A (start), 761}/*-------------------------< SAVE_DP >--------------------------*/,{ 762 /* 763 * Clear ACK immediately. 764 * No need to delay it. 765 */ 766 SCR_CLR (SCR_ACK), 767 0, 768 /* 769 * Keep track we received a SAVE DP, so 770 * we will switch to the other PM context 771 * on the next PM since the DP may point 772 * to the current PM context. 773 */ 774 SCR_REG_REG (HF_REG, SCR_OR, HF_DP_SAVED), 775 0, 776 /* 777 * SAVE_DP message: 778 * Copy the data pointer to SAVEP. 779 */ 780 SCR_COPY (4), 781 RADDR_1 (temp), 782 HADDR_1 (ccb_head.savep), 783 SCR_JUMP, 784 PADDR_A (dispatch), 785}/*-------------------------< RESTORE_DP >-----------------------*/,{ 786 /* 787 * RESTORE_DP message: 788 * Copy SAVEP to actual data pointer. 789 */ 790 SCR_COPY (4), 791 HADDR_1 (ccb_head.savep), 792 RADDR_1 (temp), 793 SCR_JUMP, 794 PADDR_A (clrack), 795}/*-------------------------< DISCONNECT >-----------------------*/,{ 796 /* 797 * DISCONNECTing ... 798 * 799 * disable the "unexpected disconnect" feature, 800 * and remove the ACK signal. 801 */ 802 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 803 0, 804 SCR_CLR (SCR_ACK|SCR_ATN), 805 0, 806 /* 807 * Wait for the disconnect. 808 */ 809 SCR_WAIT_DISC, 810 0, 811 /* 812 * Status is: DISCONNECTED. 813 */ 814 SCR_LOAD_REG (HS_REG, HS_DISCONNECT), 815 0, 816 /* 817 * Save host status. 818 */ 819 SCR_COPY (4), 820 RADDR_1 (scr0), 821 HADDR_1 (ccb_head.status), 822 /* 823 * If QUIRK_AUTOSAVE is set, 824 * do a "save pointer" operation. 825 */ 826 SCR_FROM_REG (QU_REG), 827 0, 828 SCR_JUMP ^ IFFALSE (MASK (SYM_QUIRK_AUTOSAVE, SYM_QUIRK_AUTOSAVE)), 829 PADDR_A (disconnect2), 830 /* 831 * like SAVE_DP message: 832 * Remember we saved the data pointer. 833 * Copy data pointer to SAVEP. 834 */ 835 SCR_REG_REG (HF_REG, SCR_OR, HF_DP_SAVED), 836 0, 837 SCR_COPY (4), 838 RADDR_1 (temp), 839 HADDR_1 (ccb_head.savep), 840}/*-------------------------< DISCONNECT2 >----------------------*/,{ 841 /* 842 * Move back the CCB header using self-modifying 843 * SCRIPTS. 844 */ 845 SCR_COPY (4), 846 RADDR_1 (dsa), 847 PADDR_A (_sms_a65), 848 SCR_COPY (sizeof(struct sym_ccbh)), 849 HADDR_1 (ccb_head), 850}/*-------------------------< _SMS_A65 >-------------------------*/,{ 851 0, 852 SCR_JUMP, 853 PADDR_A (start), 854}/*-------------------------< IDLE >-----------------------------*/,{ 855 /* 856 * Nothing to do? 857 * Switch the LED off and wait for reselect. 858 * Will be patched with a NO_OP if LED 859 * not needed or not desired. 860 */ 861 SCR_REG_REG (gpreg, SCR_OR, 0x01), 862 0, 863#ifdef SYM_CONF_IARB_SUPPORT 864 SCR_JUMPR, 865 8, 866#endif 867}/*-------------------------< UNGETJOB >-------------------------*/,{ 868#ifdef SYM_CONF_IARB_SUPPORT 869 /* 870 * Set IMMEDIATE ARBITRATION, for the next time. 871 * This will give us better chance to win arbitration 872 * for the job we just wanted to do. 873 */ 874 SCR_REG_REG (scntl1, SCR_OR, IARB), 875 0, 876#endif 877 /* 878 * We are not able to restart the SCRIPTS if we are 879 * interrupted and these instruction haven't been 880 * all executed. BTW, this is very unlikely to 881 * happen, but we check that from the C code. 882 */ 883 SCR_LOAD_REG (dsa, 0xff), 884 0, 885 SCR_COPY (4), 886 RADDR_1 (scratcha), 887 PADDR_B (startpos), 888}/*-------------------------< RESELECT >-------------------------*/,{ 889 /* 890 * Make sure we are in initiator mode. 891 */ 892 SCR_CLR (SCR_TRG), 893 0, 894 /* 895 * Sleep waiting for a reselection. 896 */ 897 SCR_WAIT_RESEL, 898 PADDR_A(start), 899}/*-------------------------< RESELECTED >-----------------------*/,{ 900 /* 901 * Switch the LED on. 902 * Will be patched with a NO_OP if LED 903 * not needed or not desired. 904 */ 905 SCR_REG_REG (gpreg, SCR_AND, 0xfe), 906 0, 907 /* 908 * load the target id into the sdid 909 */ 910 SCR_REG_SFBR (ssid, SCR_AND, 0x8F), 911 0, 912 SCR_TO_REG (sdid), 913 0, 914 /* 915 * Load the target control block address 916 */ 917 SCR_COPY (4), 918 PADDR_B (targtbl), 919 RADDR_1 (dsa), 920 SCR_SFBR_REG (dsa, SCR_SHL, 0), 921 0, 922 SCR_REG_REG (dsa, SCR_SHL, 0), 923 0, 924 SCR_REG_REG (dsa, SCR_AND, 0x3c), 925 0, 926 SCR_COPY (4), 927 RADDR_1 (dsa), 928 PADDR_A (_sms_a70), 929 SCR_COPY (4), 930}/*-------------------------< _SMS_A70 >-------------------------*/,{ 931 0, 932 RADDR_1 (dsa), 933 /* 934 * Copy the TCB header to a fixed place in 935 * the HCB. 936 */ 937 SCR_COPY (4), 938 RADDR_1 (dsa), 939 PADDR_A (_sms_a80), 940 SCR_COPY (sizeof(struct sym_tcbh)), 941}/*-------------------------< _SMS_A80 >-------------------------*/,{ 942 0, 943 HADDR_1 (tcb_head), 944 /* 945 * We expect MESSAGE IN phase. 946 * If not, get help from the C code. 947 */ 948 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), 949 SIR_RESEL_NO_MSG_IN, 950}/*-------------------------< RESELECTED1 >----------------------*/,{ 951 /* 952 * Load the synchronous transfer registers. 953 */ 954 SCR_COPY (1), 955 HADDR_1 (tcb_head.wval), 956 RADDR_1 (scntl3), 957 SCR_COPY (1), 958 HADDR_1 (tcb_head.sval), 959 RADDR_1 (sxfer), 960 /* 961 * Get the IDENTIFY message. 962 */ 963 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 964 HADDR_1 (msgin), 965 /* 966 * If IDENTIFY LUN #0, use a faster path 967 * to find the LCB structure. 968 */ 969 SCR_JUMP ^ IFTRUE (MASK (0x80, 0xbf)), 970 PADDR_A (resel_lun0), 971 /* 972 * If message isn't an IDENTIFY, 973 * tell the C code about. 974 */ 975 SCR_INT ^ IFFALSE (MASK (0x80, 0x80)), 976 SIR_RESEL_NO_IDENTIFY, 977 /* 978 * It is an IDENTIFY message, 979 * Load the LUN control block address. 980 */ 981 SCR_COPY (4), 982 HADDR_1 (tcb_head.luntbl_sa), 983 RADDR_1 (dsa), 984 SCR_SFBR_REG (dsa, SCR_SHL, 0), 985 0, 986 SCR_REG_REG (dsa, SCR_SHL, 0), 987 0, 988 SCR_REG_REG (dsa, SCR_AND, 0xfc), 989 0, 990 SCR_COPY (4), 991 RADDR_1 (dsa), 992 PADDR_A (_sms_a90), 993 SCR_COPY (4), 994}/*-------------------------< _SMS_A90 >-------------------------*/,{ 995 0, 996 RADDR_1 (dsa), 997 SCR_JUMPR, 998 12, 999}/*-------------------------< RESEL_LUN0 >-----------------------*/,{ 1000 /* 1001 * LUN 0 special case (but usual one :)) 1002 */ 1003 SCR_COPY (4), 1004 HADDR_1 (tcb_head.lun0_sa), 1005 RADDR_1 (dsa), 1006 /* 1007 * Jump indirectly to the reselect action for this LUN. 1008 * (lcb.head.resel_sa assumed at offset zero of lcb). 1009 */ 1010 SCR_COPY (4), 1011 RADDR_1 (dsa), 1012 PADDR_A (_sms_a100), 1013 SCR_COPY (4), 1014}/*-------------------------< _SMS_A100 >------------------------*/,{ 1015 0, 1016 RADDR_1 (temp), 1017 SCR_RETURN, 1018 0, 1019 /* In normal situations, we jump to RESEL_TAG or RESEL_NO_TAG */ 1020}/*-------------------------< RESEL_TAG >------------------------*/,{ 1021 /* 1022 * ACK the IDENTIFY previously received. 1023 */ 1024 SCR_CLR (SCR_ACK), 1025 0, 1026 /* 1027 * It shall be a tagged command. 1028 * Read SIMPLE+TAG. 1029 * The C code will deal with errors. 1030 * Aggressive optimization, isn't it? :) 1031 */ 1032 SCR_MOVE_ABS (2) ^ SCR_MSG_IN, 1033 HADDR_1 (msgin), 1034 /* 1035 * Copy the LCB header to a fixed place in 1036 * the HCB using self-modifying SCRIPTS. 1037 */ 1038 SCR_COPY (4), 1039 RADDR_1 (dsa), 1040 PADDR_A (_sms_a110), 1041 SCR_COPY (sizeof(struct sym_lcbh)), 1042}/*-------------------------< _SMS_A110 >------------------------*/,{ 1043 0, 1044 HADDR_1 (lcb_head), 1045 /* 1046 * Load the pointer to the tagged task 1047 * table for this LUN. 1048 */ 1049 SCR_COPY (4), 1050 HADDR_1 (lcb_head.itlq_tbl_sa), 1051 RADDR_1 (dsa), 1052 /* 1053 * The SIDL still contains the TAG value. 1054 * Aggressive optimization, isn't it? :):) 1055 */ 1056 SCR_REG_SFBR (sidl, SCR_SHL, 0), 1057 0, 1058#if SYM_CONF_MAX_TASK*4 > 512 1059 SCR_JUMPR ^ IFFALSE (CARRYSET), 1060 8, 1061 SCR_REG_REG (dsa1, SCR_OR, 2), 1062 0, 1063 SCR_REG_REG (sfbr, SCR_SHL, 0), 1064 0, 1065 SCR_JUMPR ^ IFFALSE (CARRYSET), 1066 8, 1067 SCR_REG_REG (dsa1, SCR_OR, 1), 1068 0, 1069#elif SYM_CONF_MAX_TASK*4 > 256 1070 SCR_JUMPR ^ IFFALSE (CARRYSET), 1071 8, 1072 SCR_REG_REG (dsa1, SCR_OR, 1), 1073 0, 1074#endif 1075 /* 1076 * Retrieve the DSA of this task. 1077 * JUMP indirectly to the restart point of the CCB. 1078 */ 1079 SCR_SFBR_REG (dsa, SCR_AND, 0xfc), 1080 0, 1081 SCR_COPY (4), 1082 RADDR_1 (dsa), 1083 PADDR_A (_sms_a120), 1084 SCR_COPY (4), 1085}/*-------------------------< _SMS_A120 >------------------------*/,{ 1086 0, 1087 RADDR_1 (dsa), 1088}/*-------------------------< RESEL_GO >-------------------------*/,{ 1089 SCR_COPY (4), 1090 RADDR_1 (dsa), 1091 PADDR_A (_sms_a130), 1092 /* 1093 * Move 'ccb.phys.head.go' action to 1094 * scratch/scratch1. So scratch1 will 1095 * contain the 'restart' field of the 1096 * 'go' structure. 1097 */ 1098 SCR_COPY (8), 1099}/*-------------------------< _SMS_A130 >------------------------*/,{ 1100 0, 1101 PADDR_B (scratch), 1102 SCR_COPY (4), 1103 PADDR_B (scratch1), /* phys.head.go.restart */ 1104 RADDR_1 (temp), 1105 SCR_RETURN, 1106 0, 1107 /* In normal situations we branch to RESEL_DSA */ 1108}/*-------------------------< RESEL_DSA >------------------------*/,{ 1109 /* 1110 * ACK the IDENTIFY or TAG previously received. 1111 */ 1112 SCR_CLR (SCR_ACK), 1113 0, 1114}/*-------------------------< RESEL_DSA1 >-----------------------*/,{ 1115 /* 1116 * Copy the CCB header to a fixed location 1117 * in the HCB using self-modifying SCRIPTS. 1118 */ 1119 SCR_COPY (4), 1120 RADDR_1 (dsa), 1121 PADDR_A (_sms_a140), 1122 SCR_COPY (sizeof(struct sym_ccbh)), 1123}/*-------------------------< _SMS_A140 >------------------------*/,{ 1124 0, 1125 HADDR_1 (ccb_head), 1126 /* 1127 * Load the savep (saved data pointer) into 1128 * the actual data pointer. 1129 */ 1130 SCR_COPY (4), 1131 HADDR_1 (ccb_head.savep), 1132 RADDR_1 (temp), 1133 /* 1134 * Initialize the status register 1135 */ 1136 SCR_COPY (4), 1137 HADDR_1 (ccb_head.status), 1138 RADDR_1 (scr0), 1139 /* 1140 * Jump to dispatcher. 1141 */ 1142 SCR_JUMP, 1143 PADDR_A (dispatch), 1144}/*-------------------------< RESEL_NO_TAG >---------------------*/,{ 1145 /* 1146 * Copy the LCB header to a fixed place in 1147 * the HCB using self-modifying SCRIPTS. 1148 */ 1149 SCR_COPY (4), 1150 RADDR_1 (dsa), 1151 PADDR_A (_sms_a145), 1152 SCR_COPY (sizeof(struct sym_lcbh)), 1153}/*-------------------------< _SMS_A145 >------------------------*/,{ 1154 0, 1155 HADDR_1 (lcb_head), 1156 /* 1157 * Load the DSA with the unique ITL task. 1158 */ 1159 SCR_COPY (4), 1160 HADDR_1 (lcb_head.itl_task_sa), 1161 RADDR_1 (dsa), 1162 SCR_JUMP, 1163 PADDR_A (resel_go), 1164}/*-------------------------< DATA_IN >--------------------------*/,{ 1165/* 1166 * Because the size depends on the 1167 * #define SYM_CONF_MAX_SG parameter, 1168 * it is filled in at runtime. 1169 * 1170 * ##===========< i=0; i<SYM_CONF_MAX_SG >========= 1171 * || SCR_CHMOV_TBL ^ SCR_DATA_IN, 1172 * || offsetof (struct sym_dsb, data[ i]), 1173 * ##========================================== 1174 */ 11750 1176}/*-------------------------< DATA_IN2 >-------------------------*/,{ 1177 SCR_CALL, 1178 PADDR_A (datai_done), 1179 SCR_JUMP, 1180 PADDR_B (data_ovrun), 1181}/*-------------------------< DATA_OUT >-------------------------*/,{ 1182/* 1183 * Because the size depends on the 1184 * #define SYM_CONF_MAX_SG parameter, 1185 * it is filled in at runtime. 1186 * 1187 * ##===========< i=0; i<SYM_CONF_MAX_SG >========= 1188 * || SCR_CHMOV_TBL ^ SCR_DATA_OUT, 1189 * || offsetof (struct sym_dsb, data[ i]), 1190 * ##========================================== 1191 */ 11920 1193}/*-------------------------< DATA_OUT2 >------------------------*/,{ 1194 SCR_CALL, 1195 PADDR_A (datao_done), 1196 SCR_JUMP, 1197 PADDR_B (data_ovrun), 1198}/*-------------------------< PM0_DATA >-------------------------*/,{ 1199 /* 1200 * Read our host flags to SFBR, so we will be able 1201 * to check against the data direction we expect. 1202 */ 1203 SCR_FROM_REG (HF_REG), 1204 0, 1205 /* 1206 * Check against actual DATA PHASE. 1207 */ 1208 SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), 1209 PADDR_A (pm0_data_out), 1210 /* 1211 * Actual phase is DATA IN. 1212 * Check against expected direction. 1213 */ 1214 SCR_JUMP ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN)), 1215 PADDR_B (data_ovrun), 1216 /* 1217 * Keep track we are moving data from the 1218 * PM0 DATA mini-script. 1219 */ 1220 SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0), 1221 0, 1222 /* 1223 * Move the data to memory. 1224 */ 1225 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1226 offsetof (struct sym_ccb, phys.pm0.sg), 1227 SCR_JUMP, 1228 PADDR_A (pm0_data_end), 1229}/*-------------------------< PM0_DATA_OUT >---------------------*/,{ 1230 /* 1231 * Actual phase is DATA OUT. 1232 * Check against expected direction. 1233 */ 1234 SCR_JUMP ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN)), 1235 PADDR_B (data_ovrun), 1236 /* 1237 * Keep track we are moving data from the 1238 * PM0 DATA mini-script. 1239 */ 1240 SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0), 1241 0, 1242 /* 1243 * Move the data from memory. 1244 */ 1245 SCR_CHMOV_TBL ^ SCR_DATA_OUT, 1246 offsetof (struct sym_ccb, phys.pm0.sg), 1247}/*-------------------------< PM0_DATA_END >---------------------*/,{ 1248 /* 1249 * Clear the flag that told we were moving 1250 * data from the PM0 DATA mini-script. 1251 */ 1252 SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM0)), 1253 0, 1254 /* 1255 * Return to the previous DATA script which 1256 * is guaranteed by design (if no bug) to be 1257 * the main DATA script for this transfer. 1258 */ 1259 SCR_COPY (4), 1260 RADDR_1 (dsa), 1261 RADDR_1 (scratcha), 1262 SCR_REG_REG (scratcha, SCR_ADD, offsetof (struct sym_ccb,phys.pm0.ret)), 1263 0, 1264}/*-------------------------< PM_DATA_END >----------------------*/,{ 1265 SCR_COPY (4), 1266 RADDR_1 (scratcha), 1267 PADDR_A (_sms_a150), 1268 SCR_COPY (4), 1269}/*-------------------------< _SMS_A150 >------------------------*/,{ 1270 0, 1271 RADDR_1 (temp), 1272 SCR_RETURN, 1273 0, 1274}/*-------------------------< PM1_DATA >-------------------------*/,{ 1275 /* 1276 * Read our host flags to SFBR, so we will be able 1277 * to check against the data direction we expect. 1278 */ 1279 SCR_FROM_REG (HF_REG), 1280 0, 1281 /* 1282 * Check against actual DATA PHASE. 1283 */ 1284 SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), 1285 PADDR_A (pm1_data_out), 1286 /* 1287 * Actual phase is DATA IN. 1288 * Check against expected direction. 1289 */ 1290 SCR_JUMP ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN)), 1291 PADDR_B (data_ovrun), 1292 /* 1293 * Keep track we are moving data from the 1294 * PM1 DATA mini-script. 1295 */ 1296 SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1), 1297 0, 1298 /* 1299 * Move the data to memory. 1300 */ 1301 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1302 offsetof (struct sym_ccb, phys.pm1.sg), 1303 SCR_JUMP, 1304 PADDR_A (pm1_data_end), 1305}/*-------------------------< PM1_DATA_OUT >---------------------*/,{ 1306 /* 1307 * Actual phase is DATA OUT. 1308 * Check against expected direction. 1309 */ 1310 SCR_JUMP ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN)), 1311 PADDR_B (data_ovrun), 1312 /* 1313 * Keep track we are moving data from the 1314 * PM1 DATA mini-script. 1315 */ 1316 SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1), 1317 0, 1318 /* 1319 * Move the data from memory. 1320 */ 1321 SCR_CHMOV_TBL ^ SCR_DATA_OUT, 1322 offsetof (struct sym_ccb, phys.pm1.sg), 1323}/*-------------------------< PM1_DATA_END >---------------------*/,{ 1324 /* 1325 * Clear the flag that told we were moving 1326 * data from the PM1 DATA mini-script. 1327 */ 1328 SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM1)), 1329 0, 1330 /* 1331 * Return to the previous DATA script which 1332 * is guaranteed by design (if no bug) to be 1333 * the main DATA script for this transfer. 1334 */ 1335 SCR_COPY (4), 1336 RADDR_1 (dsa), 1337 RADDR_1 (scratcha), 1338 SCR_REG_REG (scratcha, SCR_ADD, offsetof (struct sym_ccb,phys.pm1.ret)), 1339 0, 1340 SCR_JUMP, 1341 PADDR_A (pm_data_end), 1342}/*--------------------------<>----------------------------------*/ 1343}; 1344 1345static const struct SYM_FWB_SCR SYM_FWB_SCR = { 1346/*-------------------------< NO_DATA >--------------------------*/ { 1347 SCR_JUMP, 1348 PADDR_B (data_ovrun), 1349}/*-------------------------< SEL_FOR_ABORT >--------------------*/,{ 1350 /* 1351 * We are jumped here by the C code, if we have 1352 * some target to reset or some disconnected 1353 * job to abort. Since error recovery is a serious 1354 * busyness, we will really reset the SCSI BUS, if 1355 * case of a SCSI interrupt occurring in this path. 1356 */ 1357 1358 /* 1359 * Set initiator mode. 1360 */ 1361 SCR_CLR (SCR_TRG), 1362 0, 1363 /* 1364 * And try to select this target. 1365 */ 1366 SCR_SEL_TBL_ATN ^ offsetof (struct sym_hcb, abrt_sel), 1367 PADDR_A (reselect), 1368 /* 1369 * Wait for the selection to complete or 1370 * the selection to time out. 1371 */ 1372 SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_OUT)), 1373 -8, 1374 /* 1375 * Call the C code. 1376 */ 1377 SCR_INT, 1378 SIR_TARGET_SELECTED, 1379 /* 1380 * The C code should let us continue here. 1381 * Send the 'kiss of death' message. 1382 * We expect an immediate disconnect once 1383 * the target has eaten the message. 1384 */ 1385 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 1386 0, 1387 SCR_MOVE_TBL ^ SCR_MSG_OUT, 1388 offsetof (struct sym_hcb, abrt_tbl), 1389 SCR_CLR (SCR_ACK|SCR_ATN), 1390 0, 1391 SCR_WAIT_DISC, 1392 0, 1393 /* 1394 * Tell the C code that we are done. 1395 */ 1396 SCR_INT, 1397 SIR_ABORT_SENT, 1398}/*-------------------------< SEL_FOR_ABORT_1 >------------------*/,{ 1399 /* 1400 * Jump at scheduler. 1401 */ 1402 SCR_JUMP, 1403 PADDR_A (start), 1404}/*-------------------------< MSG_IN_ETC >-----------------------*/,{ 1405 /* 1406 * If it is an EXTENDED (variable size message) 1407 * Handle it. 1408 */ 1409 SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)), 1410 PADDR_B (msg_extended), 1411 /* 1412 * Let the C code handle any other 1413 * 1 byte message. 1414 */ 1415 SCR_JUMP ^ IFTRUE (MASK (0x00, 0xf0)), 1416 PADDR_B (msg_received), 1417 SCR_JUMP ^ IFTRUE (MASK (0x10, 0xf0)), 1418 PADDR_B (msg_received), 1419 /* 1420 * We donnot handle 2 bytes messages from SCRIPTS. 1421 * So, let the C code deal with these ones too. 1422 */ 1423 SCR_JUMP ^ IFFALSE (MASK (0x20, 0xf0)), 1424 PADDR_B (msg_weird_seen), 1425 SCR_CLR (SCR_ACK), 1426 0, 1427 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 1428 HADDR_1 (msgin[1]), 1429}/*-------------------------< MSG_RECEIVED >---------------------*/,{ 1430 SCR_COPY (4), /* DUMMY READ */ 1431 HADDR_1 (cache), 1432 RADDR_1 (scratcha), 1433 SCR_INT, 1434 SIR_MSG_RECEIVED, 1435}/*-------------------------< MSG_WEIRD_SEEN >-------------------*/,{ 1436 SCR_COPY (4), /* DUMMY READ */ 1437 HADDR_1 (cache), 1438 RADDR_1 (scratcha), 1439 SCR_INT, 1440 SIR_MSG_WEIRD, 1441}/*-------------------------< MSG_EXTENDED >---------------------*/,{ 1442 /* 1443 * Clear ACK and get the next byte 1444 * assumed to be the message length. 1445 */ 1446 SCR_CLR (SCR_ACK), 1447 0, 1448 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 1449 HADDR_1 (msgin[1]), 1450 /* 1451 * Try to catch some unlikely situations as 0 length 1452 * or too large the length. 1453 */ 1454 SCR_JUMP ^ IFTRUE (DATA (0)), 1455 PADDR_B (msg_weird_seen), 1456 SCR_TO_REG (scratcha), 1457 0, 1458 SCR_REG_REG (sfbr, SCR_ADD, (256-8)), 1459 0, 1460 SCR_JUMP ^ IFTRUE (CARRYSET), 1461 PADDR_B (msg_weird_seen), 1462 /* 1463 * We donnot handle extended messages from SCRIPTS. 1464 * Read the amount of data corresponding to the 1465 * message length and call the C code. 1466 */ 1467 SCR_COPY (1), 1468 RADDR_1 (scratcha), 1469 PADDR_B (_sms_b10), 1470 SCR_CLR (SCR_ACK), 1471 0, 1472}/*-------------------------< _SMS_B10 >-------------------------*/,{ 1473 SCR_MOVE_ABS (0) ^ SCR_MSG_IN, 1474 HADDR_1 (msgin[2]), 1475 SCR_JUMP, 1476 PADDR_B (msg_received), 1477}/*-------------------------< MSG_BAD >--------------------------*/,{ 1478 /* 1479 * unimplemented message - reject it. 1480 */ 1481 SCR_INT, 1482 SIR_REJECT_TO_SEND, 1483 SCR_SET (SCR_ATN), 1484 0, 1485 SCR_JUMP, 1486 PADDR_A (clrack), 1487}/*-------------------------< MSG_WEIRD >------------------------*/,{ 1488 /* 1489 * weird message received 1490 * ignore all MSG IN phases and reject it. 1491 */ 1492 SCR_INT, 1493 SIR_REJECT_TO_SEND, 1494 SCR_SET (SCR_ATN), 1495 0, 1496}/*-------------------------< MSG_WEIRD1 >-----------------------*/,{ 1497 SCR_CLR (SCR_ACK), 1498 0, 1499 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 1500 PADDR_A (dispatch), 1501 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 1502 HADDR_1 (scratch), 1503 SCR_JUMP, 1504 PADDR_B (msg_weird1), 1505}/*-------------------------< WDTR_RESP >------------------------*/,{ 1506 /* 1507 * let the target fetch our answer. 1508 */ 1509 SCR_SET (SCR_ATN), 1510 0, 1511 SCR_CLR (SCR_ACK), 1512 0, 1513 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 1514 PADDR_B (nego_bad_phase), 1515}/*-------------------------< SEND_WDTR >------------------------*/,{ 1516 /* 1517 * Send the M_X_WIDE_REQ 1518 */ 1519 SCR_MOVE_ABS (4) ^ SCR_MSG_OUT, 1520 HADDR_1 (msgout), 1521 SCR_JUMP, 1522 PADDR_B (msg_out_done), 1523}/*-------------------------< SDTR_RESP >------------------------*/,{ 1524 /* 1525 * let the target fetch our answer. 1526 */ 1527 SCR_SET (SCR_ATN), 1528 0, 1529 SCR_CLR (SCR_ACK), 1530 0, 1531 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 1532 PADDR_B (nego_bad_phase), 1533}/*-------------------------< SEND_SDTR >------------------------*/,{ 1534 /* 1535 * Send the M_X_SYNC_REQ 1536 */ 1537 SCR_MOVE_ABS (5) ^ SCR_MSG_OUT, 1538 HADDR_1 (msgout), 1539 SCR_JUMP, 1540 PADDR_B (msg_out_done), 1541}/*-------------------------< PPR_RESP >-------------------------*/,{ 1542 /* 1543 * let the target fetch our answer. 1544 */ 1545 SCR_SET (SCR_ATN), 1546 0, 1547 SCR_CLR (SCR_ACK), 1548 0, 1549 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 1550 PADDR_B (nego_bad_phase), 1551}/*-------------------------< SEND_PPR >-------------------------*/,{ 1552 /* 1553 * Send the M_X_PPR_REQ 1554 */ 1555 SCR_MOVE_ABS (8) ^ SCR_MSG_OUT, 1556 HADDR_1 (msgout), 1557 SCR_JUMP, 1558 PADDR_B (msg_out_done), 1559}/*-------------------------< NEGO_BAD_PHASE >-------------------*/,{ 1560 SCR_INT, 1561 SIR_NEGO_PROTO, 1562 SCR_JUMP, 1563 PADDR_A (dispatch), 1564}/*-------------------------< MSG_OUT >--------------------------*/,{ 1565 /* 1566 * The target requests a message. 1567 * We donnot send messages that may 1568 * require the device to go to bus free. 1569 */ 1570 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 1571 HADDR_1 (msgout), 1572 /* 1573 * ... wait for the next phase 1574 * if it's a message out, send it again, ... 1575 */ 1576 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), 1577 PADDR_B (msg_out), 1578}/*-------------------------< MSG_OUT_DONE >---------------------*/,{ 1579 /* 1580 * Let the C code be aware of the 1581 * sent message and clear the message. 1582 */ 1583 SCR_INT, 1584 SIR_MSG_OUT_DONE, 1585 /* 1586 * ... and process the next phase 1587 */ 1588 SCR_JUMP, 1589 PADDR_A (dispatch), 1590}/*-------------------------< DATA_OVRUN >-----------------------*/,{ 1591 /* 1592 * Zero scratcha that will count the 1593 * extras bytes. 1594 */ 1595 SCR_COPY (4), 1596 PADDR_B (zero), 1597 RADDR_1 (scratcha), 1598}/*-------------------------< DATA_OVRUN1 >----------------------*/,{ 1599 /* 1600 * The target may want to transfer too much data. 1601 * 1602 * If phase is DATA OUT write 1 byte and count it. 1603 */ 1604 SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)), 1605 16, 1606 SCR_CHMOV_ABS (1) ^ SCR_DATA_OUT, 1607 HADDR_1 (scratch), 1608 SCR_JUMP, 1609 PADDR_B (data_ovrun2), 1610 /* 1611 * If WSR is set, clear this condition, and 1612 * count this byte. 1613 */ 1614 SCR_FROM_REG (scntl2), 1615 0, 1616 SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)), 1617 16, 1618 SCR_REG_REG (scntl2, SCR_OR, WSR), 1619 0, 1620 SCR_JUMP, 1621 PADDR_B (data_ovrun2), 1622 /* 1623 * Finally check against DATA IN phase. 1624 * Signal data overrun to the C code 1625 * and jump to dispatcher if not so. 1626 * Read 1 byte otherwise and count it. 1627 */ 1628 SCR_JUMPR ^ IFTRUE (WHEN (SCR_DATA_IN)), 1629 16, 1630 SCR_INT, 1631 SIR_DATA_OVERRUN, 1632 SCR_JUMP, 1633 PADDR_A (dispatch), 1634 SCR_CHMOV_ABS (1) ^ SCR_DATA_IN, 1635 HADDR_1 (scratch), 1636}/*-------------------------< DATA_OVRUN2 >----------------------*/,{ 1637 /* 1638 * Count this byte. 1639 * This will allow to return a negative 1640 * residual to user. 1641 */ 1642 SCR_REG_REG (scratcha, SCR_ADD, 0x01), 1643 0, 1644 SCR_REG_REG (scratcha1, SCR_ADDC, 0), 1645 0, 1646 SCR_REG_REG (scratcha2, SCR_ADDC, 0), 1647 0, 1648 /* 1649 * .. and repeat as required. 1650 */ 1651 SCR_JUMP, 1652 PADDR_B (data_ovrun1), 1653}/*-------------------------< ABORT_RESEL >----------------------*/,{ 1654 SCR_SET (SCR_ATN), 1655 0, 1656 SCR_CLR (SCR_ACK), 1657 0, 1658 /* 1659 * send the abort/abortag/reset message 1660 * we expect an immediate disconnect 1661 */ 1662 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 1663 0, 1664 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 1665 HADDR_1 (msgout), 1666 SCR_CLR (SCR_ACK|SCR_ATN), 1667 0, 1668 SCR_WAIT_DISC, 1669 0, 1670 SCR_INT, 1671 SIR_RESEL_ABORTED, 1672 SCR_JUMP, 1673 PADDR_A (start), 1674}/*-------------------------< RESEND_IDENT >---------------------*/,{ 1675 /* 1676 * The target stays in MSG OUT phase after having acked 1677 * Identify [+ Tag [+ Extended message ]]. Targets shall 1678 * behave this way on parity error. 1679 * We must send it again all the messages. 1680 */ 1681 SCR_SET (SCR_ATN), /* Shall be asserted 2 deskew delays before the */ 1682 0, /* 1rst ACK = 90 ns. Hope the chip isn't too fast */ 1683 SCR_JUMP, 1684 PADDR_A (send_ident), 1685}/*-------------------------< IDENT_BREAK >----------------------*/,{ 1686 SCR_CLR (SCR_ATN), 1687 0, 1688 SCR_JUMP, 1689 PADDR_A (select2), 1690}/*-------------------------< IDENT_BREAK_ATN >------------------*/,{ 1691 SCR_SET (SCR_ATN), 1692 0, 1693 SCR_JUMP, 1694 PADDR_A (select2), 1695}/*-------------------------< SDATA_IN >-------------------------*/,{ 1696 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1697 offsetof (struct sym_dsb, sense), 1698 SCR_CALL, 1699 PADDR_A (datai_done), 1700 SCR_JUMP, 1701 PADDR_B (data_ovrun), 1702}/*-------------------------< RESEL_BAD_LUN >--------------------*/,{ 1703 /* 1704 * Message is an IDENTIFY, but lun is unknown. 1705 * Signal problem to C code for logging the event. 1706 * Send a M_ABORT to clear all pending tasks. 1707 */ 1708 SCR_INT, 1709 SIR_RESEL_BAD_LUN, 1710 SCR_JUMP, 1711 PADDR_B (abort_resel), 1712}/*-------------------------< BAD_I_T_L >------------------------*/,{ 1713 /* 1714 * We donnot have a task for that I_T_L. 1715 * Signal problem to C code for logging the event. 1716 * Send a M_ABORT message. 1717 */ 1718 SCR_INT, 1719 SIR_RESEL_BAD_I_T_L, 1720 SCR_JUMP, 1721 PADDR_B (abort_resel), 1722}/*-------------------------< BAD_I_T_L_Q >----------------------*/,{ 1723 /* 1724 * We donnot have a task that matches the tag. 1725 * Signal problem to C code for logging the event. 1726 * Send a M_ABORTTAG message. 1727 */ 1728 SCR_INT, 1729 SIR_RESEL_BAD_I_T_L_Q, 1730 SCR_JUMP, 1731 PADDR_B (abort_resel), 1732}/*-------------------------< BAD_STATUS >-----------------------*/,{ 1733 /* 1734 * Anything different from INTERMEDIATE 1735 * CONDITION MET should be a bad SCSI status, 1736 * given that GOOD status has already been tested. 1737 * Call the C code. 1738 */ 1739 SCR_COPY (4), 1740 PADDR_B (startpos), 1741 RADDR_1 (scratcha), 1742 SCR_INT ^ IFFALSE (DATA (S_COND_MET)), 1743 SIR_BAD_SCSI_STATUS, 1744 SCR_RETURN, 1745 0, 1746}/*-------------------------< WSR_MA_HELPER >--------------------*/,{ 1747 /* 1748 * Helper for the C code when WSR bit is set. 1749 * Perform the move of the residual byte. 1750 */ 1751 SCR_CHMOV_TBL ^ SCR_DATA_IN, 1752 offsetof (struct sym_ccb, phys.wresid), 1753 SCR_JUMP, 1754 PADDR_A (dispatch), 1755}/*-------------------------< ZERO >-----------------------------*/,{ 1756 SCR_DATA_ZERO, 1757}/*-------------------------< SCRATCH >--------------------------*/,{ 1758 SCR_DATA_ZERO, /* MUST BE BEFORE SCRATCH1 */ 1759}/*-------------------------< SCRATCH1 >-------------------------*/,{ 1760 SCR_DATA_ZERO, 1761}/*-------------------------< PREV_DONE >------------------------*/,{ 1762 SCR_DATA_ZERO, /* MUST BE BEFORE DONE_POS ! */ 1763}/*-------------------------< DONE_POS >-------------------------*/,{ 1764 SCR_DATA_ZERO, 1765}/*-------------------------< NEXTJOB >--------------------------*/,{ 1766 SCR_DATA_ZERO, /* MUST BE BEFORE STARTPOS ! */ 1767}/*-------------------------< STARTPOS >-------------------------*/,{ 1768 SCR_DATA_ZERO, 1769}/*-------------------------< TARGTBL >--------------------------*/,{ 1770 SCR_DATA_ZERO, 1771 1772}/*-------------------------< SNOOPTEST >------------------------*/,{ 1773 /* 1774 * Read the variable. 1775 */ 1776 SCR_COPY (4), 1777 HADDR_1 (cache), 1778 RADDR_1 (scratcha), 1779 /* 1780 * Write the variable. 1781 */ 1782 SCR_COPY (4), 1783 RADDR_1 (temp), 1784 HADDR_1 (cache), 1785 /* 1786 * Read back the variable. 1787 */ 1788 SCR_COPY (4), 1789 HADDR_1 (cache), 1790 RADDR_1 (temp), 1791}/*-------------------------< SNOOPEND >-------------------------*/,{ 1792 /* 1793 * And stop. 1794 */ 1795 SCR_INT, 1796 99, 1797}/*--------------------------<>----------------------------------*/ 1798}; 1799