pcivar.h revision 209154
1/*-
2 * Copyright (c) 1997, Stefan Esser <se@freebsd.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice unmodified, this list of conditions, and the following
10 *    disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 *
26 * $FreeBSD: head/sys/dev/pci/pcivar.h 209154 2010-06-14 07:10:37Z mav $
27 *
28 */
29
30#ifndef _PCIVAR_H_
31#define	_PCIVAR_H_
32
33#include <sys/queue.h>
34
35/* some PCI bus constants */
36#define	PCI_MAXMAPS_0	6	/* max. no. of memory/port maps */
37#define	PCI_MAXMAPS_1	2	/* max. no. of maps for PCI to PCI bridge */
38#define	PCI_MAXMAPS_2	1	/* max. no. of maps for CardBus bridge */
39
40typedef uint64_t pci_addr_t;
41
42/* Interesting values for PCI power management */
43struct pcicfg_pp {
44    uint16_t	pp_cap;		/* PCI power management capabilities */
45    uint8_t	pp_status;	/* config space address of PCI power status reg */
46    uint8_t	pp_pmcsr;	/* config space address of PMCSR reg */
47    uint8_t	pp_data;	/* config space address of PCI power data reg */
48};
49
50struct vpd_readonly {
51    char	keyword[2];
52    char	*value;
53};
54
55struct vpd_write {
56    char	keyword[2];
57    char	*value;
58    int 	start;
59    int 	len;
60};
61
62struct pcicfg_vpd {
63    uint8_t	vpd_reg;	/* base register, + 2 for addr, + 4 data */
64    char	vpd_cached;
65    char	*vpd_ident;	/* string identifier */
66    int 	vpd_rocnt;
67    struct vpd_readonly *vpd_ros;
68    int 	vpd_wcnt;
69    struct vpd_write *vpd_w;
70};
71
72/* Interesting values for PCI MSI */
73struct pcicfg_msi {
74    uint16_t	msi_ctrl;	/* Message Control */
75    uint8_t	msi_location;	/* Offset of MSI capability registers. */
76    uint8_t	msi_msgnum;	/* Number of messages */
77    int		msi_alloc;	/* Number of allocated messages. */
78    uint64_t	msi_addr;	/* Contents of address register. */
79    uint16_t	msi_data;	/* Contents of data register. */
80    u_int	msi_handlers;
81};
82
83/* Interesting values for PCI MSI-X */
84struct msix_vector {
85    uint64_t	mv_address;	/* Contents of address register. */
86    uint32_t	mv_data;	/* Contents of data register. */
87    int		mv_irq;
88};
89
90struct msix_table_entry {
91    u_int	mte_vector;	/* 1-based index into msix_vectors array. */
92    u_int	mte_handlers;
93};
94
95struct pcicfg_msix {
96    uint16_t	msix_ctrl;	/* Message Control */
97    uint16_t	msix_msgnum;	/* Number of messages */
98    uint8_t	msix_location;	/* Offset of MSI-X capability registers. */
99    uint8_t	msix_table_bar;	/* BAR containing vector table. */
100    uint8_t	msix_pba_bar;	/* BAR containing PBA. */
101    uint32_t	msix_table_offset;
102    uint32_t	msix_pba_offset;
103    int		msix_alloc;	/* Number of allocated vectors. */
104    int		msix_table_len;	/* Length of virtual table. */
105    struct msix_table_entry *msix_table; /* Virtual table. */
106    struct msix_vector *msix_vectors;	/* Array of allocated vectors. */
107    struct resource *msix_table_res;	/* Resource containing vector table. */
108    struct resource *msix_pba_res;	/* Resource containing PBA. */
109};
110
111/* Interesting values for HyperTransport */
112struct pcicfg_ht {
113    uint8_t	ht_msimap;	/* Offset of MSI mapping cap registers. */
114    uint16_t	ht_msictrl;	/* MSI mapping control */
115    uint64_t	ht_msiaddr;	/* MSI mapping base address */
116};
117
118/* config header information common to all header types */
119typedef struct pcicfg {
120    struct device *dev;		/* device which owns this */
121
122    uint32_t	bar[PCI_MAXMAPS_0]; /* BARs */
123    uint32_t	bios;		/* BIOS mapping */
124
125    uint16_t	subvendor;	/* card vendor ID */
126    uint16_t	subdevice;	/* card device ID, assigned by card vendor */
127    uint16_t	vendor;		/* chip vendor ID */
128    uint16_t	device;		/* chip device ID, assigned by chip vendor */
129
130    uint16_t	cmdreg;		/* disable/enable chip and PCI options */
131    uint16_t	statreg;	/* supported PCI features and error state */
132
133    uint8_t	baseclass;	/* chip PCI class */
134    uint8_t	subclass;	/* chip PCI subclass */
135    uint8_t	progif;		/* chip PCI programming interface */
136    uint8_t	revid;		/* chip revision ID */
137
138    uint8_t	hdrtype;	/* chip config header type */
139    uint8_t	cachelnsz;	/* cache line size in 4byte units */
140    uint8_t	intpin;		/* PCI interrupt pin */
141    uint8_t	intline;	/* interrupt line (IRQ for PC arch) */
142
143    uint8_t	mingnt;		/* min. useful bus grant time in 250ns units */
144    uint8_t	maxlat;		/* max. tolerated bus grant latency in 250ns */
145    uint8_t	lattimer;	/* latency timer in units of 30ns bus cycles */
146
147    uint8_t	mfdev;		/* multi-function device (from hdrtype reg) */
148    uint8_t	nummaps;	/* actual number of PCI maps used */
149
150    uint32_t	domain;		/* PCI domain */
151    uint8_t	bus;		/* config space bus address */
152    uint8_t	slot;		/* config space slot address */
153    uint8_t	func;		/* config space function number */
154
155    struct pcicfg_pp pp;	/* Power management */
156    struct pcicfg_vpd vpd;	/* Vital product data */
157    struct pcicfg_msi msi;	/* PCI MSI */
158    struct pcicfg_msix msix;	/* PCI MSI-X */
159    struct pcicfg_ht ht;	/* HyperTransport */
160} pcicfgregs;
161
162/* additional type 1 device config header information (PCI to PCI bridge) */
163
164#define	PCI_PPBMEMBASE(h,l)  ((((pci_addr_t)(h) << 32) + ((l)<<16)) & ~0xfffff)
165#define	PCI_PPBMEMLIMIT(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) | 0xfffff)
166#define	PCI_PPBIOBASE(h,l)   ((((h)<<16) + ((l)<<8)) & ~0xfff)
167#define	PCI_PPBIOLIMIT(h,l)  ((((h)<<16) + ((l)<<8)) | 0xfff)
168
169typedef struct {
170    pci_addr_t	pmembase;	/* base address of prefetchable memory */
171    pci_addr_t	pmemlimit;	/* topmost address of prefetchable memory */
172    uint32_t	membase;	/* base address of memory window */
173    uint32_t	memlimit;	/* topmost address of memory window */
174    uint32_t	iobase;		/* base address of port window */
175    uint32_t	iolimit;	/* topmost address of port window */
176    uint16_t	secstat;	/* secondary bus status register */
177    uint16_t	bridgectl;	/* bridge control register */
178    uint8_t	seclat;		/* CardBus latency timer */
179} pcih1cfgregs;
180
181/* additional type 2 device config header information (CardBus bridge) */
182
183typedef struct {
184    uint32_t	membase0;	/* base address of memory window */
185    uint32_t	memlimit0;	/* topmost address of memory window */
186    uint32_t	membase1;	/* base address of memory window */
187    uint32_t	memlimit1;	/* topmost address of memory window */
188    uint32_t	iobase0;	/* base address of port window */
189    uint32_t	iolimit0;	/* topmost address of port window */
190    uint32_t	iobase1;	/* base address of port window */
191    uint32_t	iolimit1;	/* topmost address of port window */
192    uint32_t	pccardif;	/* PC Card 16bit IF legacy more base addr. */
193    uint16_t	secstat;	/* secondary bus status register */
194    uint16_t	bridgectl;	/* bridge control register */
195    uint8_t	seclat;		/* CardBus latency timer */
196} pcih2cfgregs;
197
198extern uint32_t pci_numdevs;
199
200/* Only if the prerequisites are present */
201#if defined(_SYS_BUS_H_) && defined(_SYS_PCIIO_H_)
202struct pci_devinfo {
203        STAILQ_ENTRY(pci_devinfo) pci_links;
204	struct resource_list resources;
205	pcicfgregs		cfg;
206	struct pci_conf		conf;
207};
208#endif
209
210#ifdef _SYS_BUS_H_
211
212#include "pci_if.h"
213
214enum pci_device_ivars {
215    PCI_IVAR_SUBVENDOR,
216    PCI_IVAR_SUBDEVICE,
217    PCI_IVAR_VENDOR,
218    PCI_IVAR_DEVICE,
219    PCI_IVAR_DEVID,
220    PCI_IVAR_CLASS,
221    PCI_IVAR_SUBCLASS,
222    PCI_IVAR_PROGIF,
223    PCI_IVAR_REVID,
224    PCI_IVAR_INTPIN,
225    PCI_IVAR_IRQ,
226    PCI_IVAR_DOMAIN,
227    PCI_IVAR_BUS,
228    PCI_IVAR_SLOT,
229    PCI_IVAR_FUNCTION,
230    PCI_IVAR_ETHADDR,
231    PCI_IVAR_CMDREG,
232    PCI_IVAR_CACHELNSZ,
233    PCI_IVAR_MINGNT,
234    PCI_IVAR_MAXLAT,
235    PCI_IVAR_LATTIMER
236};
237
238/*
239 * Simplified accessors for pci devices
240 */
241#define	PCI_ACCESSOR(var, ivar, type)					\
242	__BUS_ACCESSOR(pci, var, PCI, ivar, type)
243
244PCI_ACCESSOR(subvendor,		SUBVENDOR,	uint16_t)
245PCI_ACCESSOR(subdevice,		SUBDEVICE,	uint16_t)
246PCI_ACCESSOR(vendor,		VENDOR,		uint16_t)
247PCI_ACCESSOR(device,		DEVICE,		uint16_t)
248PCI_ACCESSOR(devid,		DEVID,		uint32_t)
249PCI_ACCESSOR(class,		CLASS,		uint8_t)
250PCI_ACCESSOR(subclass,		SUBCLASS,	uint8_t)
251PCI_ACCESSOR(progif,		PROGIF,		uint8_t)
252PCI_ACCESSOR(revid,		REVID,		uint8_t)
253PCI_ACCESSOR(intpin,		INTPIN,		uint8_t)
254PCI_ACCESSOR(irq,		IRQ,		uint8_t)
255PCI_ACCESSOR(domain,		DOMAIN,		uint32_t)
256PCI_ACCESSOR(bus,		BUS,		uint8_t)
257PCI_ACCESSOR(slot,		SLOT,		uint8_t)
258PCI_ACCESSOR(function,		FUNCTION,	uint8_t)
259PCI_ACCESSOR(ether,		ETHADDR,	uint8_t *)
260PCI_ACCESSOR(cmdreg,		CMDREG,		uint8_t)
261PCI_ACCESSOR(cachelnsz,		CACHELNSZ,	uint8_t)
262PCI_ACCESSOR(mingnt,		MINGNT,		uint8_t)
263PCI_ACCESSOR(maxlat,		MAXLAT,		uint8_t)
264PCI_ACCESSOR(lattimer,		LATTIMER,	uint8_t)
265
266#undef PCI_ACCESSOR
267
268/*
269 * Operations on configuration space.
270 */
271static __inline uint32_t
272pci_read_config(device_t dev, int reg, int width)
273{
274    return PCI_READ_CONFIG(device_get_parent(dev), dev, reg, width);
275}
276
277static __inline void
278pci_write_config(device_t dev, int reg, uint32_t val, int width)
279{
280    PCI_WRITE_CONFIG(device_get_parent(dev), dev, reg, val, width);
281}
282
283/*
284 * Ivars for pci bridges.
285 */
286
287/*typedef enum pci_device_ivars pcib_device_ivars;*/
288enum pcib_device_ivars {
289	PCIB_IVAR_DOMAIN,
290	PCIB_IVAR_BUS
291};
292
293#define	PCIB_ACCESSOR(var, ivar, type)					 \
294    __BUS_ACCESSOR(pcib, var, PCIB, ivar, type)
295
296PCIB_ACCESSOR(domain,		DOMAIN,		uint32_t)
297PCIB_ACCESSOR(bus,		BUS,		uint32_t)
298
299#undef PCIB_ACCESSOR
300
301/*
302 * PCI interrupt validation.  Invalid interrupt values such as 0 or 128
303 * on i386 or other platforms should be mapped out in the MD pcireadconf
304 * code and not here, since the only MI invalid IRQ is 255.
305 */
306#define	PCI_INVALID_IRQ		255
307#define	PCI_INTERRUPT_VALID(x)	((x) != PCI_INVALID_IRQ)
308
309/*
310 * Convenience functions.
311 *
312 * These should be used in preference to manually manipulating
313 * configuration space.
314 */
315static __inline int
316pci_enable_busmaster(device_t dev)
317{
318    return(PCI_ENABLE_BUSMASTER(device_get_parent(dev), dev));
319}
320
321static __inline int
322pci_disable_busmaster(device_t dev)
323{
324    return(PCI_DISABLE_BUSMASTER(device_get_parent(dev), dev));
325}
326
327static __inline int
328pci_enable_io(device_t dev, int space)
329{
330    return(PCI_ENABLE_IO(device_get_parent(dev), dev, space));
331}
332
333static __inline int
334pci_disable_io(device_t dev, int space)
335{
336    return(PCI_DISABLE_IO(device_get_parent(dev), dev, space));
337}
338
339static __inline int
340pci_get_vpd_ident(device_t dev, const char **identptr)
341{
342    return(PCI_GET_VPD_IDENT(device_get_parent(dev), dev, identptr));
343}
344
345static __inline int
346pci_get_vpd_readonly(device_t dev, const char *kw, const char **identptr)
347{
348    return(PCI_GET_VPD_READONLY(device_get_parent(dev), dev, kw, identptr));
349}
350
351/*
352 * Check if the address range falls within the VGA defined address range(s)
353 */
354static __inline int
355pci_is_vga_ioport_range(u_long start, u_long end)
356{
357
358	return (((start >= 0x3b0 && end <= 0x3bb) ||
359	    (start >= 0x3c0 && end <= 0x3df)) ? 1 : 0);
360}
361
362static __inline int
363pci_is_vga_memory_range(u_long start, u_long end)
364{
365
366	return ((start >= 0xa0000 && end <= 0xbffff) ? 1 : 0);
367}
368
369/*
370 * PCI power states are as defined by ACPI:
371 *
372 * D0	State in which device is on and running.  It is receiving full
373 *	power from the system and delivering full functionality to the user.
374 * D1	Class-specific low-power state in which device context may or may not
375 *	be lost.  Buses in D1 cannot do anything to the bus that would force
376 *	devices on that bus to lose context.
377 * D2	Class-specific low-power state in which device context may or may
378 *	not be lost.  Attains greater power savings than D1.  Buses in D2
379 *	can cause devices on that bus to lose some context.  Devices in D2
380 *	must be prepared for the bus to be in D2 or higher.
381 * D3	State in which the device is off and not running.  Device context is
382 *	lost.  Power can be removed from the device.
383 */
384#define	PCI_POWERSTATE_D0	0
385#define	PCI_POWERSTATE_D1	1
386#define	PCI_POWERSTATE_D2	2
387#define	PCI_POWERSTATE_D3	3
388#define	PCI_POWERSTATE_UNKNOWN	-1
389
390static __inline int
391pci_set_powerstate(device_t dev, int state)
392{
393    return PCI_SET_POWERSTATE(device_get_parent(dev), dev, state);
394}
395
396static __inline int
397pci_get_powerstate(device_t dev)
398{
399    return PCI_GET_POWERSTATE(device_get_parent(dev), dev);
400}
401
402static __inline int
403pci_find_extcap(device_t dev, int capability, int *capreg)
404{
405    return PCI_FIND_EXTCAP(device_get_parent(dev), dev, capability, capreg);
406}
407
408static __inline int
409pci_alloc_msi(device_t dev, int *count)
410{
411    return (PCI_ALLOC_MSI(device_get_parent(dev), dev, count));
412}
413
414static __inline int
415pci_alloc_msix(device_t dev, int *count)
416{
417    return (PCI_ALLOC_MSIX(device_get_parent(dev), dev, count));
418}
419
420static __inline int
421pci_remap_msix(device_t dev, int count, const u_int *vectors)
422{
423    return (PCI_REMAP_MSIX(device_get_parent(dev), dev, count, vectors));
424}
425
426static __inline int
427pci_release_msi(device_t dev)
428{
429    return (PCI_RELEASE_MSI(device_get_parent(dev), dev));
430}
431
432static __inline int
433pci_msi_count(device_t dev)
434{
435    return (PCI_MSI_COUNT(device_get_parent(dev), dev));
436}
437
438static __inline int
439pci_msix_count(device_t dev)
440{
441    return (PCI_MSIX_COUNT(device_get_parent(dev), dev));
442}
443
444device_t pci_find_bsf(uint8_t, uint8_t, uint8_t);
445device_t pci_find_dbsf(uint32_t, uint8_t, uint8_t, uint8_t);
446device_t pci_find_device(uint16_t, uint16_t);
447
448/* Can be used by drivers to manage the MSI-X table. */
449int	pci_pending_msix(device_t dev, u_int index);
450
451int	pci_msi_device_blacklisted(device_t dev);
452
453void	pci_ht_map_msi(device_t dev, uint64_t addr);
454
455int	pci_get_max_read_req(device_t dev);
456int	pci_set_max_read_req(device_t dev, int size);
457
458#endif	/* _SYS_BUS_H_ */
459
460/*
461 * cdev switch for control device, initialised in generic PCI code
462 */
463extern struct cdevsw pcicdev;
464
465/*
466 * List of all PCI devices, generation count for the list.
467 */
468STAILQ_HEAD(devlist, pci_devinfo);
469
470extern struct devlist	pci_devq;
471extern uint32_t	pci_generation;
472
473#endif /* _PCIVAR_H_ */
474