1/*- 2 * FreeBSD/CAM specific routines for LSI '909 FC adapters. 3 * FreeBSD Version. 4 * 5 * Copyright (c) 2000, 2001 by Greg Ansley 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice immediately at the beginning of the file, without modification, 12 * this list of conditions, and the following disclaimer. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28/*- 29 * Copyright (c) 2002, 2006 by Matthew Jacob 30 * All rights reserved. 31 * 32 * Redistribution and use in source and binary forms, with or without 33 * modification, are permitted provided that the following conditions are 34 * met: 35 * 1. Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 38 * substantially similar to the "NO WARRANTY" disclaimer below 39 * ("Disclaimer") and any redistribution must be conditioned upon including 40 * a substantially similar Disclaimer requirement for further binary 41 * redistribution. 42 * 3. Neither the names of the above listed copyright holders nor the names 43 * of any contributors may be used to endorse or promote products derived 44 * from this software without specific prior written permission. 45 * 46 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 47 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 48 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 49 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 50 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 51 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 52 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 53 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 54 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 55 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT 56 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 57 * 58 * Support from Chris Ellsworth in order to make SAS adapters work 59 * is gratefully acknowledged. 60 * 61 * Support from LSI-Logic has also gone a great deal toward making this a 62 * workable subsystem and is gratefully acknowledged. 63 */ 64/*- 65 * Copyright (c) 2004, Avid Technology, Inc. and its contributors. 66 * Copyright (c) 2005, WHEEL Sp. z o.o. 67 * Copyright (c) 2004, 2005 Justin T. Gibbs 68 * All rights reserved. 69 * 70 * Redistribution and use in source and binary forms, with or without 71 * modification, are permitted provided that the following conditions are 72 * met: 73 * 1. Redistributions of source code must retain the above copyright 74 * notice, this list of conditions and the following disclaimer. 75 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 76 * substantially similar to the "NO WARRANTY" disclaimer below 77 * ("Disclaimer") and any redistribution must be conditioned upon including 78 * a substantially similar Disclaimer requirement for further binary 79 * redistribution. 80 * 3. Neither the names of the above listed copyright holders nor the names 81 * of any contributors may be used to endorse or promote products derived 82 * from this software without specific prior written permission. 83 * 84 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 85 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 86 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 87 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 88 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 89 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 90 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 91 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 92 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 93 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT 94 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 95 */ 96#include <sys/cdefs.h> 97__FBSDID("$FreeBSD$"); 98 99#include <dev/mpt/mpt.h> 100#include <dev/mpt/mpt_cam.h> 101#include <dev/mpt/mpt_raid.h> 102 103#include "dev/mpt/mpilib/mpi_ioc.h" /* XXX Fix Event Handling!!! */ 104#include "dev/mpt/mpilib/mpi_init.h" 105#include "dev/mpt/mpilib/mpi_targ.h" 106#include "dev/mpt/mpilib/mpi_fc.h" 107#include "dev/mpt/mpilib/mpi_sas.h" 108 109#include <sys/callout.h> 110#include <sys/kthread.h> 111#include <sys/sysctl.h> 112 113static void mpt_poll(struct cam_sim *); 114static timeout_t mpt_timeout; 115static void mpt_action(struct cam_sim *, union ccb *); 116static int 117mpt_get_spi_settings(struct mpt_softc *, struct ccb_trans_settings *); 118static void mpt_setwidth(struct mpt_softc *, int, int); 119static void mpt_setsync(struct mpt_softc *, int, int, int); 120static int mpt_update_spi_config(struct mpt_softc *, int); 121 122static mpt_reply_handler_t mpt_scsi_reply_handler; 123static mpt_reply_handler_t mpt_scsi_tmf_reply_handler; 124static mpt_reply_handler_t mpt_fc_els_reply_handler; 125static int mpt_scsi_reply_frame_handler(struct mpt_softc *, request_t *, 126 MSG_DEFAULT_REPLY *); 127static int mpt_bus_reset(struct mpt_softc *, target_id_t, lun_id_t, int); 128static int mpt_fc_reset_link(struct mpt_softc *, int); 129 130static int mpt_spawn_recovery_thread(struct mpt_softc *mpt); 131static void mpt_terminate_recovery_thread(struct mpt_softc *mpt); 132static void mpt_recovery_thread(void *arg); 133static void mpt_recover_commands(struct mpt_softc *mpt); 134 135static int mpt_scsi_send_tmf(struct mpt_softc *, u_int, u_int, u_int, 136 u_int, u_int, u_int, int); 137 138static void mpt_fc_post_els(struct mpt_softc *mpt, request_t *, int); 139static void mpt_post_target_command(struct mpt_softc *, request_t *, int); 140static int mpt_add_els_buffers(struct mpt_softc *mpt); 141static int mpt_add_target_commands(struct mpt_softc *mpt); 142static int mpt_enable_lun(struct mpt_softc *, target_id_t, lun_id_t); 143static int mpt_disable_lun(struct mpt_softc *, target_id_t, lun_id_t); 144static void mpt_target_start_io(struct mpt_softc *, union ccb *); 145static cam_status mpt_abort_target_ccb(struct mpt_softc *, union ccb *); 146static int mpt_abort_target_cmd(struct mpt_softc *, request_t *); 147static void mpt_scsi_tgt_status(struct mpt_softc *, union ccb *, request_t *, 148 uint8_t, uint8_t const *); 149static void 150mpt_scsi_tgt_tsk_mgmt(struct mpt_softc *, request_t *, mpt_task_mgmt_t, 151 tgt_resource_t *, int); 152static void mpt_tgt_dump_tgt_state(struct mpt_softc *, request_t *); 153static void mpt_tgt_dump_req_state(struct mpt_softc *, request_t *); 154static mpt_reply_handler_t mpt_scsi_tgt_reply_handler; 155static mpt_reply_handler_t mpt_sata_pass_reply_handler; 156 157static uint32_t scsi_io_handler_id = MPT_HANDLER_ID_NONE; 158static uint32_t scsi_tmf_handler_id = MPT_HANDLER_ID_NONE; 159static uint32_t fc_els_handler_id = MPT_HANDLER_ID_NONE; 160static uint32_t sata_pass_handler_id = MPT_HANDLER_ID_NONE; 161 162static mpt_probe_handler_t mpt_cam_probe; 163static mpt_attach_handler_t mpt_cam_attach; 164static mpt_enable_handler_t mpt_cam_enable; 165static mpt_ready_handler_t mpt_cam_ready; 166static mpt_event_handler_t mpt_cam_event; 167static mpt_reset_handler_t mpt_cam_ioc_reset; 168static mpt_detach_handler_t mpt_cam_detach; 169 170static struct mpt_personality mpt_cam_personality = 171{ 172 .name = "mpt_cam", 173 .probe = mpt_cam_probe, 174 .attach = mpt_cam_attach, 175 .enable = mpt_cam_enable, 176 .ready = mpt_cam_ready, 177 .event = mpt_cam_event, 178 .reset = mpt_cam_ioc_reset, 179 .detach = mpt_cam_detach, 180}; 181 182DECLARE_MPT_PERSONALITY(mpt_cam, SI_ORDER_SECOND); 183MODULE_DEPEND(mpt_cam, cam, 1, 1, 1); 184 185int mpt_enable_sata_wc = -1; 186TUNABLE_INT("hw.mpt.enable_sata_wc", &mpt_enable_sata_wc); 187 188static int 189mpt_cam_probe(struct mpt_softc *mpt) 190{ 191 int role; 192 193 /* 194 * Only attach to nodes that support the initiator or target role 195 * (or want to) or have RAID physical devices that need CAM pass-thru 196 * support. 197 */ 198 if (mpt->do_cfg_role) { 199 role = mpt->cfg_role; 200 } else { 201 role = mpt->role; 202 } 203 if ((role & (MPT_ROLE_TARGET|MPT_ROLE_INITIATOR)) != 0 || 204 (mpt->ioc_page2 != NULL && mpt->ioc_page2->MaxPhysDisks != 0)) { 205 return (0); 206 } 207 return (ENODEV); 208} 209 210static int 211mpt_cam_attach(struct mpt_softc *mpt) 212{ 213 struct cam_devq *devq; 214 mpt_handler_t handler; 215 int maxq; 216 int error; 217 218 MPT_LOCK(mpt); 219 TAILQ_INIT(&mpt->request_timeout_list); 220 maxq = (mpt->ioc_facts.GlobalCredits < MPT_MAX_REQUESTS(mpt))? 221 mpt->ioc_facts.GlobalCredits : MPT_MAX_REQUESTS(mpt); 222 223 handler.reply_handler = mpt_scsi_reply_handler; 224 error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, 225 &scsi_io_handler_id); 226 if (error != 0) { 227 MPT_UNLOCK(mpt); 228 goto cleanup; 229 } 230 231 handler.reply_handler = mpt_scsi_tmf_reply_handler; 232 error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, 233 &scsi_tmf_handler_id); 234 if (error != 0) { 235 MPT_UNLOCK(mpt); 236 goto cleanup; 237 } 238 239 /* 240 * If we're fibre channel and could support target mode, we register 241 * an ELS reply handler and give it resources. 242 */ 243 if (mpt->is_fc && (mpt->role & MPT_ROLE_TARGET) != 0) { 244 handler.reply_handler = mpt_fc_els_reply_handler; 245 error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, 246 &fc_els_handler_id); 247 if (error != 0) { 248 MPT_UNLOCK(mpt); 249 goto cleanup; 250 } 251 if (mpt_add_els_buffers(mpt) == FALSE) { 252 error = ENOMEM; 253 MPT_UNLOCK(mpt); 254 goto cleanup; 255 } 256 maxq -= mpt->els_cmds_allocated; 257 } 258 259 /* 260 * If we support target mode, we register a reply handler for it, 261 * but don't add command resources until we actually enable target 262 * mode. 263 */ 264 if (mpt->is_fc && (mpt->role & MPT_ROLE_TARGET) != 0) { 265 handler.reply_handler = mpt_scsi_tgt_reply_handler; 266 error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, 267 &mpt->scsi_tgt_handler_id); 268 if (error != 0) { 269 MPT_UNLOCK(mpt); 270 goto cleanup; 271 } 272 } 273 274 if (mpt->is_sas) { 275 handler.reply_handler = mpt_sata_pass_reply_handler; 276 error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, 277 &sata_pass_handler_id); 278 if (error != 0) { 279 MPT_UNLOCK(mpt); 280 goto cleanup; 281 } 282 } 283 284 /* 285 * We keep one request reserved for timeout TMF requests. 286 */ 287 mpt->tmf_req = mpt_get_request(mpt, FALSE); 288 if (mpt->tmf_req == NULL) { 289 mpt_prt(mpt, "Unable to allocate dedicated TMF request!\n"); 290 error = ENOMEM; 291 MPT_UNLOCK(mpt); 292 goto cleanup; 293 } 294 295 /* 296 * Mark the request as free even though not on the free list. 297 * There is only one TMF request allowed to be outstanding at 298 * a time and the TMF routines perform their own allocation 299 * tracking using the standard state flags. 300 */ 301 mpt->tmf_req->state = REQ_STATE_FREE; 302 maxq--; 303 304 /* 305 * The rest of this is CAM foo, for which we need to drop our lock 306 */ 307 MPT_UNLOCK(mpt); 308 309 if (mpt_spawn_recovery_thread(mpt) != 0) { 310 mpt_prt(mpt, "Unable to spawn recovery thread!\n"); 311 error = ENOMEM; 312 goto cleanup; 313 } 314 315 /* 316 * Create the device queue for our SIM(s). 317 */ 318 devq = cam_simq_alloc(maxq); 319 if (devq == NULL) { 320 mpt_prt(mpt, "Unable to allocate CAM SIMQ!\n"); 321 error = ENOMEM; 322 goto cleanup; 323 } 324 325 /* 326 * Construct our SIM entry. 327 */ 328 mpt->sim = 329 mpt_sim_alloc(mpt_action, mpt_poll, "mpt", mpt, 1, maxq, devq); 330 if (mpt->sim == NULL) { 331 mpt_prt(mpt, "Unable to allocate CAM SIM!\n"); 332 cam_simq_free(devq); 333 error = ENOMEM; 334 goto cleanup; 335 } 336 337 /* 338 * Register exactly this bus. 339 */ 340 MPT_LOCK(mpt); 341 if (xpt_bus_register(mpt->sim, mpt->dev, 0) != CAM_SUCCESS) { 342 mpt_prt(mpt, "Bus registration Failed!\n"); 343 error = ENOMEM; 344 MPT_UNLOCK(mpt); 345 goto cleanup; 346 } 347 348 if (xpt_create_path(&mpt->path, NULL, cam_sim_path(mpt->sim), 349 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 350 mpt_prt(mpt, "Unable to allocate Path!\n"); 351 error = ENOMEM; 352 MPT_UNLOCK(mpt); 353 goto cleanup; 354 } 355 MPT_UNLOCK(mpt); 356 357 /* 358 * Only register a second bus for RAID physical 359 * devices if the controller supports RAID. 360 */ 361 if (mpt->ioc_page2 == NULL || mpt->ioc_page2->MaxPhysDisks == 0) { 362 return (0); 363 } 364 365 /* 366 * Create a "bus" to export all hidden disks to CAM. 367 */ 368 mpt->phydisk_sim = 369 mpt_sim_alloc(mpt_action, mpt_poll, "mpt", mpt, 1, maxq, devq); 370 if (mpt->phydisk_sim == NULL) { 371 mpt_prt(mpt, "Unable to allocate Physical Disk CAM SIM!\n"); 372 error = ENOMEM; 373 goto cleanup; 374 } 375 376 /* 377 * Register this bus. 378 */ 379 MPT_LOCK(mpt); 380 if (xpt_bus_register(mpt->phydisk_sim, mpt->dev, 1) != 381 CAM_SUCCESS) { 382 mpt_prt(mpt, "Physical Disk Bus registration Failed!\n"); 383 error = ENOMEM; 384 MPT_UNLOCK(mpt); 385 goto cleanup; 386 } 387 388 if (xpt_create_path(&mpt->phydisk_path, NULL, 389 cam_sim_path(mpt->phydisk_sim), 390 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 391 mpt_prt(mpt, "Unable to allocate Physical Disk Path!\n"); 392 error = ENOMEM; 393 MPT_UNLOCK(mpt); 394 goto cleanup; 395 } 396 MPT_UNLOCK(mpt); 397 mpt_lprt(mpt, MPT_PRT_DEBUG, "attached cam\n"); 398 return (0); 399 400cleanup: 401 mpt_cam_detach(mpt); 402 return (error); 403} 404 405/* 406 * Read FC configuration information 407 */ 408static int 409mpt_read_config_info_fc(struct mpt_softc *mpt) 410{ 411 struct sysctl_ctx_list *ctx; 412 struct sysctl_oid *tree; 413 char *topology = NULL; 414 int rv; 415 416 rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_FC_PORT, 0, 417 0, &mpt->mpt_fcport_page0.Header, FALSE, 5000); 418 if (rv) { 419 return (-1); 420 } 421 mpt_lprt(mpt, MPT_PRT_DEBUG, "FC Port Page 0 Header: %x %x %x %x\n", 422 mpt->mpt_fcport_page0.Header.PageVersion, 423 mpt->mpt_fcport_page0.Header.PageLength, 424 mpt->mpt_fcport_page0.Header.PageNumber, 425 mpt->mpt_fcport_page0.Header.PageType); 426 427 428 rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_fcport_page0.Header, 429 sizeof(mpt->mpt_fcport_page0), FALSE, 5000); 430 if (rv) { 431 mpt_prt(mpt, "failed to read FC Port Page 0\n"); 432 return (-1); 433 } 434 mpt2host_config_page_fc_port_0(&mpt->mpt_fcport_page0); 435 436 mpt->mpt_fcport_speed = mpt->mpt_fcport_page0.CurrentSpeed; 437 438 switch (mpt->mpt_fcport_page0.Flags & 439 MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK) { 440 case MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT: 441 mpt->mpt_fcport_speed = 0; 442 topology = "<NO LOOP>"; 443 break; 444 case MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT: 445 topology = "N-Port"; 446 break; 447 case MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP: 448 topology = "NL-Port"; 449 break; 450 case MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT: 451 topology = "F-Port"; 452 break; 453 case MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP: 454 topology = "FL-Port"; 455 break; 456 default: 457 mpt->mpt_fcport_speed = 0; 458 topology = "?"; 459 break; 460 } 461 462 mpt_lprt(mpt, MPT_PRT_INFO, 463 "FC Port Page 0: Topology <%s> WWNN 0x%08x%08x WWPN 0x%08x%08x " 464 "Speed %u-Gbit\n", topology, 465 mpt->mpt_fcport_page0.WWNN.High, 466 mpt->mpt_fcport_page0.WWNN.Low, 467 mpt->mpt_fcport_page0.WWPN.High, 468 mpt->mpt_fcport_page0.WWPN.Low, 469 mpt->mpt_fcport_speed); 470 MPT_UNLOCK(mpt); 471 ctx = device_get_sysctl_ctx(mpt->dev); 472 tree = device_get_sysctl_tree(mpt->dev); 473 474 snprintf(mpt->scinfo.fc.wwnn, sizeof (mpt->scinfo.fc.wwnn), 475 "0x%08x%08x", mpt->mpt_fcport_page0.WWNN.High, 476 mpt->mpt_fcport_page0.WWNN.Low); 477 478 snprintf(mpt->scinfo.fc.wwpn, sizeof (mpt->scinfo.fc.wwpn), 479 "0x%08x%08x", mpt->mpt_fcport_page0.WWPN.High, 480 mpt->mpt_fcport_page0.WWPN.Low); 481 482 SYSCTL_ADD_STRING(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 483 "wwnn", CTLFLAG_RD, mpt->scinfo.fc.wwnn, 0, 484 "World Wide Node Name"); 485 486 SYSCTL_ADD_STRING(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 487 "wwpn", CTLFLAG_RD, mpt->scinfo.fc.wwpn, 0, 488 "World Wide Port Name"); 489 490 MPT_LOCK(mpt); 491 return (0); 492} 493 494/* 495 * Set FC configuration information. 496 */ 497static int 498mpt_set_initial_config_fc(struct mpt_softc *mpt) 499{ 500 CONFIG_PAGE_FC_PORT_1 fc; 501 U32 fl; 502 int r, doit = 0; 503 int role; 504 505 r = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_FC_PORT, 1, 0, 506 &fc.Header, FALSE, 5000); 507 if (r) { 508 mpt_prt(mpt, "failed to read FC page 1 header\n"); 509 return (mpt_fc_reset_link(mpt, 1)); 510 } 511 512 r = mpt_read_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_NVRAM, 0, 513 &fc.Header, sizeof (fc), FALSE, 5000); 514 if (r) { 515 mpt_prt(mpt, "failed to read FC page 1\n"); 516 return (mpt_fc_reset_link(mpt, 1)); 517 } 518 mpt2host_config_page_fc_port_1(&fc); 519 520 /* 521 * Check our flags to make sure we support the role we want. 522 */ 523 doit = 0; 524 role = 0; 525 fl = fc.Flags; 526 527 if (fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT) { 528 role |= MPT_ROLE_INITIATOR; 529 } 530 if (fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG) { 531 role |= MPT_ROLE_TARGET; 532 } 533 534 fl &= ~MPI_FCPORTPAGE1_FLAGS_PROT_MASK; 535 536 if (mpt->do_cfg_role == 0) { 537 role = mpt->cfg_role; 538 } else { 539 mpt->do_cfg_role = 0; 540 } 541 542 if (role != mpt->cfg_role) { 543 if (mpt->cfg_role & MPT_ROLE_INITIATOR) { 544 if ((role & MPT_ROLE_INITIATOR) == 0) { 545 mpt_prt(mpt, "adding initiator role\n"); 546 fl |= MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT; 547 doit++; 548 } else { 549 mpt_prt(mpt, "keeping initiator role\n"); 550 } 551 } else if (role & MPT_ROLE_INITIATOR) { 552 mpt_prt(mpt, "removing initiator role\n"); 553 doit++; 554 } 555 if (mpt->cfg_role & MPT_ROLE_TARGET) { 556 if ((role & MPT_ROLE_TARGET) == 0) { 557 mpt_prt(mpt, "adding target role\n"); 558 fl |= MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG; 559 doit++; 560 } else { 561 mpt_prt(mpt, "keeping target role\n"); 562 } 563 } else if (role & MPT_ROLE_TARGET) { 564 mpt_prt(mpt, "removing target role\n"); 565 doit++; 566 } 567 mpt->role = mpt->cfg_role; 568 } 569 570 if (fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG) { 571 if ((fl & MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID) == 0) { 572 mpt_prt(mpt, "adding OXID option\n"); 573 fl |= MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID; 574 doit++; 575 } 576 } 577 578 if (doit) { 579 fc.Flags = fl; 580 host2mpt_config_page_fc_port_1(&fc); 581 r = mpt_write_cfg_page(mpt, 582 MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM, 0, &fc.Header, 583 sizeof(fc), FALSE, 5000); 584 if (r != 0) { 585 mpt_prt(mpt, "failed to update NVRAM with changes\n"); 586 return (0); 587 } 588 mpt_prt(mpt, "NOTE: NVRAM changes will not take " 589 "effect until next reboot or IOC reset\n"); 590 } 591 return (0); 592} 593 594static int 595mptsas_sas_io_unit_pg0(struct mpt_softc *mpt, struct mptsas_portinfo *portinfo) 596{ 597 ConfigExtendedPageHeader_t hdr; 598 struct mptsas_phyinfo *phyinfo; 599 SasIOUnitPage0_t *buffer; 600 int error, len, i; 601 602 error = mpt_read_extcfg_header(mpt, MPI_SASIOUNITPAGE0_PAGEVERSION, 603 0, 0, MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT, 604 &hdr, 0, 10000); 605 if (error) 606 goto out; 607 if (hdr.ExtPageLength == 0) { 608 error = ENXIO; 609 goto out; 610 } 611 612 len = hdr.ExtPageLength * 4; 613 buffer = malloc(len, M_DEVBUF, M_NOWAIT|M_ZERO); 614 if (buffer == NULL) { 615 error = ENOMEM; 616 goto out; 617 } 618 619 error = mpt_read_extcfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_CURRENT, 620 0, &hdr, buffer, len, 0, 10000); 621 if (error) { 622 free(buffer, M_DEVBUF); 623 goto out; 624 } 625 626 portinfo->num_phys = buffer->NumPhys; 627 portinfo->phy_info = malloc(sizeof(*portinfo->phy_info) * 628 portinfo->num_phys, M_DEVBUF, M_NOWAIT|M_ZERO); 629 if (portinfo->phy_info == NULL) { 630 free(buffer, M_DEVBUF); 631 error = ENOMEM; 632 goto out; 633 } 634 635 for (i = 0; i < portinfo->num_phys; i++) { 636 phyinfo = &portinfo->phy_info[i]; 637 phyinfo->phy_num = i; 638 phyinfo->port_id = buffer->PhyData[i].Port; 639 phyinfo->negotiated_link_rate = 640 buffer->PhyData[i].NegotiatedLinkRate; 641 phyinfo->handle = 642 le16toh(buffer->PhyData[i].ControllerDevHandle); 643 } 644 645 free(buffer, M_DEVBUF); 646out: 647 return (error); 648} 649 650static int 651mptsas_sas_phy_pg0(struct mpt_softc *mpt, struct mptsas_phyinfo *phy_info, 652 uint32_t form, uint32_t form_specific) 653{ 654 ConfigExtendedPageHeader_t hdr; 655 SasPhyPage0_t *buffer; 656 int error; 657 658 error = mpt_read_extcfg_header(mpt, MPI_SASPHY0_PAGEVERSION, 0, 0, 659 MPI_CONFIG_EXTPAGETYPE_SAS_PHY, &hdr, 660 0, 10000); 661 if (error) 662 goto out; 663 if (hdr.ExtPageLength == 0) { 664 error = ENXIO; 665 goto out; 666 } 667 668 buffer = malloc(sizeof(SasPhyPage0_t), M_DEVBUF, M_NOWAIT|M_ZERO); 669 if (buffer == NULL) { 670 error = ENOMEM; 671 goto out; 672 } 673 674 error = mpt_read_extcfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_CURRENT, 675 form + form_specific, &hdr, buffer, 676 sizeof(SasPhyPage0_t), 0, 10000); 677 if (error) { 678 free(buffer, M_DEVBUF); 679 goto out; 680 } 681 682 phy_info->hw_link_rate = buffer->HwLinkRate; 683 phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; 684 phy_info->identify.dev_handle = le16toh(buffer->OwnerDevHandle); 685 phy_info->attached.dev_handle = le16toh(buffer->AttachedDevHandle); 686 687 free(buffer, M_DEVBUF); 688out: 689 return (error); 690} 691 692static int 693mptsas_sas_device_pg0(struct mpt_softc *mpt, struct mptsas_devinfo *device_info, 694 uint32_t form, uint32_t form_specific) 695{ 696 ConfigExtendedPageHeader_t hdr; 697 SasDevicePage0_t *buffer; 698 uint64_t sas_address; 699 int error = 0; 700 701 bzero(device_info, sizeof(*device_info)); 702 error = mpt_read_extcfg_header(mpt, MPI_SASDEVICE0_PAGEVERSION, 0, 0, 703 MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE, 704 &hdr, 0, 10000); 705 if (error) 706 goto out; 707 if (hdr.ExtPageLength == 0) { 708 error = ENXIO; 709 goto out; 710 } 711 712 buffer = malloc(sizeof(SasDevicePage0_t), M_DEVBUF, M_NOWAIT|M_ZERO); 713 if (buffer == NULL) { 714 error = ENOMEM; 715 goto out; 716 } 717 718 error = mpt_read_extcfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_CURRENT, 719 form + form_specific, &hdr, buffer, 720 sizeof(SasDevicePage0_t), 0, 10000); 721 if (error) { 722 free(buffer, M_DEVBUF); 723 goto out; 724 } 725 726 device_info->dev_handle = le16toh(buffer->DevHandle); 727 device_info->parent_dev_handle = le16toh(buffer->ParentDevHandle); 728 device_info->enclosure_handle = le16toh(buffer->EnclosureHandle); 729 device_info->slot = le16toh(buffer->Slot); 730 device_info->phy_num = buffer->PhyNum; 731 device_info->physical_port = buffer->PhysicalPort; 732 device_info->target_id = buffer->TargetID; 733 device_info->bus = buffer->Bus; 734 bcopy(&buffer->SASAddress, &sas_address, sizeof(uint64_t)); 735 device_info->sas_address = le64toh(sas_address); 736 device_info->device_info = le32toh(buffer->DeviceInfo); 737 738 free(buffer, M_DEVBUF); 739out: 740 return (error); 741} 742 743/* 744 * Read SAS configuration information. Nothing to do yet. 745 */ 746static int 747mpt_read_config_info_sas(struct mpt_softc *mpt) 748{ 749 struct mptsas_portinfo *portinfo; 750 struct mptsas_phyinfo *phyinfo; 751 int error, i; 752 753 portinfo = malloc(sizeof(*portinfo), M_DEVBUF, M_NOWAIT|M_ZERO); 754 if (portinfo == NULL) 755 return (ENOMEM); 756 757 error = mptsas_sas_io_unit_pg0(mpt, portinfo); 758 if (error) { 759 free(portinfo, M_DEVBUF); 760 return (0); 761 } 762 763 for (i = 0; i < portinfo->num_phys; i++) { 764 phyinfo = &portinfo->phy_info[i]; 765 error = mptsas_sas_phy_pg0(mpt, phyinfo, 766 (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER << 767 MPI_SAS_PHY_PGAD_FORM_SHIFT), i); 768 if (error) 769 break; 770 error = mptsas_sas_device_pg0(mpt, &phyinfo->identify, 771 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << 772 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 773 phyinfo->handle); 774 if (error) 775 break; 776 phyinfo->identify.phy_num = phyinfo->phy_num = i; 777 if (phyinfo->attached.dev_handle) 778 error = mptsas_sas_device_pg0(mpt, 779 &phyinfo->attached, 780 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << 781 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 782 phyinfo->attached.dev_handle); 783 if (error) 784 break; 785 } 786 mpt->sas_portinfo = portinfo; 787 return (0); 788} 789 790static void 791mptsas_set_sata_wc(struct mpt_softc *mpt, struct mptsas_devinfo *devinfo, 792 int enabled) 793{ 794 SataPassthroughRequest_t *pass; 795 request_t *req; 796 int error, status; 797 798 req = mpt_get_request(mpt, 0); 799 if (req == NULL) 800 return; 801 802 pass = req->req_vbuf; 803 bzero(pass, sizeof(SataPassthroughRequest_t)); 804 pass->Function = MPI_FUNCTION_SATA_PASSTHROUGH; 805 pass->TargetID = devinfo->target_id; 806 pass->Bus = devinfo->bus; 807 pass->PassthroughFlags = 0; 808 pass->ConnectionRate = MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED; 809 pass->DataLength = 0; 810 pass->MsgContext = htole32(req->index | sata_pass_handler_id); 811 pass->CommandFIS[0] = 0x27; 812 pass->CommandFIS[1] = 0x80; 813 pass->CommandFIS[2] = 0xef; 814 pass->CommandFIS[3] = (enabled) ? 0x02 : 0x82; 815 pass->CommandFIS[7] = 0x40; 816 pass->CommandFIS[15] = 0x08; 817 818 mpt_check_doorbell(mpt); 819 mpt_send_cmd(mpt, req); 820 error = mpt_wait_req(mpt, req, REQ_STATE_DONE, REQ_STATE_DONE, 0, 821 10 * 1000); 822 if (error) { 823 mpt_free_request(mpt, req); 824 printf("error %d sending passthrough\n", error); 825 return; 826 } 827 828 status = le16toh(req->IOCStatus); 829 if (status != MPI_IOCSTATUS_SUCCESS) { 830 mpt_free_request(mpt, req); 831 printf("IOCSTATUS %d\n", status); 832 return; 833 } 834 835 mpt_free_request(mpt, req); 836} 837 838/* 839 * Set SAS configuration information. Nothing to do yet. 840 */ 841static int 842mpt_set_initial_config_sas(struct mpt_softc *mpt) 843{ 844 struct mptsas_phyinfo *phyinfo; 845 int i; 846 847 if ((mpt_enable_sata_wc != -1) && (mpt->sas_portinfo != NULL)) { 848 for (i = 0; i < mpt->sas_portinfo->num_phys; i++) { 849 phyinfo = &mpt->sas_portinfo->phy_info[i]; 850 if (phyinfo->attached.dev_handle == 0) 851 continue; 852 if ((phyinfo->attached.device_info & 853 MPI_SAS_DEVICE_INFO_SATA_DEVICE) == 0) 854 continue; 855 if (bootverbose) 856 device_printf(mpt->dev, 857 "%sabling SATA WC on phy %d\n", 858 (mpt_enable_sata_wc) ? "En" : "Dis", i); 859 mptsas_set_sata_wc(mpt, &phyinfo->attached, 860 mpt_enable_sata_wc); 861 } 862 } 863 864 return (0); 865} 866 867static int 868mpt_sata_pass_reply_handler(struct mpt_softc *mpt, request_t *req, 869 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 870{ 871 872 if (req != NULL) { 873 if (reply_frame != NULL) { 874 req->IOCStatus = le16toh(reply_frame->IOCStatus); 875 } 876 req->state &= ~REQ_STATE_QUEUED; 877 req->state |= REQ_STATE_DONE; 878 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 879 if ((req->state & REQ_STATE_NEED_WAKEUP) != 0) { 880 wakeup(req); 881 } else if ((req->state & REQ_STATE_TIMEDOUT) != 0) { 882 /* 883 * Whew- we can free this request (late completion) 884 */ 885 mpt_free_request(mpt, req); 886 } 887 } 888 889 return (TRUE); 890} 891 892/* 893 * Read SCSI configuration information 894 */ 895static int 896mpt_read_config_info_spi(struct mpt_softc *mpt) 897{ 898 int rv, i; 899 900 rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 0, 0, 901 &mpt->mpt_port_page0.Header, FALSE, 5000); 902 if (rv) { 903 return (-1); 904 } 905 mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 0 Header: %x %x %x %x\n", 906 mpt->mpt_port_page0.Header.PageVersion, 907 mpt->mpt_port_page0.Header.PageLength, 908 mpt->mpt_port_page0.Header.PageNumber, 909 mpt->mpt_port_page0.Header.PageType); 910 911 rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 1, 0, 912 &mpt->mpt_port_page1.Header, FALSE, 5000); 913 if (rv) { 914 return (-1); 915 } 916 mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 1 Header: %x %x %x %x\n", 917 mpt->mpt_port_page1.Header.PageVersion, 918 mpt->mpt_port_page1.Header.PageLength, 919 mpt->mpt_port_page1.Header.PageNumber, 920 mpt->mpt_port_page1.Header.PageType); 921 922 rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 2, 0, 923 &mpt->mpt_port_page2.Header, FALSE, 5000); 924 if (rv) { 925 return (-1); 926 } 927 mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 2 Header: %x %x %x %x\n", 928 mpt->mpt_port_page2.Header.PageVersion, 929 mpt->mpt_port_page2.Header.PageLength, 930 mpt->mpt_port_page2.Header.PageNumber, 931 mpt->mpt_port_page2.Header.PageType); 932 933 for (i = 0; i < 16; i++) { 934 rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE, 935 0, i, &mpt->mpt_dev_page0[i].Header, FALSE, 5000); 936 if (rv) { 937 return (-1); 938 } 939 mpt_lprt(mpt, MPT_PRT_DEBUG, 940 "SPI Target %d Device Page 0 Header: %x %x %x %x\n", i, 941 mpt->mpt_dev_page0[i].Header.PageVersion, 942 mpt->mpt_dev_page0[i].Header.PageLength, 943 mpt->mpt_dev_page0[i].Header.PageNumber, 944 mpt->mpt_dev_page0[i].Header.PageType); 945 946 rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE, 947 1, i, &mpt->mpt_dev_page1[i].Header, FALSE, 5000); 948 if (rv) { 949 return (-1); 950 } 951 mpt_lprt(mpt, MPT_PRT_DEBUG, 952 "SPI Target %d Device Page 1 Header: %x %x %x %x\n", i, 953 mpt->mpt_dev_page1[i].Header.PageVersion, 954 mpt->mpt_dev_page1[i].Header.PageLength, 955 mpt->mpt_dev_page1[i].Header.PageNumber, 956 mpt->mpt_dev_page1[i].Header.PageType); 957 } 958 959 /* 960 * At this point, we don't *have* to fail. As long as we have 961 * valid config header information, we can (barely) lurch 962 * along. 963 */ 964 965 rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_port_page0.Header, 966 sizeof(mpt->mpt_port_page0), FALSE, 5000); 967 if (rv) { 968 mpt_prt(mpt, "failed to read SPI Port Page 0\n"); 969 } else { 970 mpt2host_config_page_scsi_port_0(&mpt->mpt_port_page0); 971 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 972 "SPI Port Page 0: Capabilities %x PhysicalInterface %x\n", 973 mpt->mpt_port_page0.Capabilities, 974 mpt->mpt_port_page0.PhysicalInterface); 975 } 976 977 rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_port_page1.Header, 978 sizeof(mpt->mpt_port_page1), FALSE, 5000); 979 if (rv) { 980 mpt_prt(mpt, "failed to read SPI Port Page 1\n"); 981 } else { 982 mpt2host_config_page_scsi_port_1(&mpt->mpt_port_page1); 983 mpt_lprt(mpt, MPT_PRT_DEBUG, 984 "SPI Port Page 1: Configuration %x OnBusTimerValue %x\n", 985 mpt->mpt_port_page1.Configuration, 986 mpt->mpt_port_page1.OnBusTimerValue); 987 } 988 989 rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_port_page2.Header, 990 sizeof(mpt->mpt_port_page2), FALSE, 5000); 991 if (rv) { 992 mpt_prt(mpt, "failed to read SPI Port Page 2\n"); 993 } else { 994 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 995 "Port Page 2: Flags %x Settings %x\n", 996 mpt->mpt_port_page2.PortFlags, 997 mpt->mpt_port_page2.PortSettings); 998 mpt2host_config_page_scsi_port_2(&mpt->mpt_port_page2); 999 for (i = 0; i < 16; i++) { 1000 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 1001 " Port Page 2 Tgt %d: timo %x SF %x Flags %x\n", 1002 i, mpt->mpt_port_page2.DeviceSettings[i].Timeout, 1003 mpt->mpt_port_page2.DeviceSettings[i].SyncFactor, 1004 mpt->mpt_port_page2.DeviceSettings[i].DeviceFlags); 1005 } 1006 } 1007 1008 for (i = 0; i < 16; i++) { 1009 rv = mpt_read_cur_cfg_page(mpt, i, 1010 &mpt->mpt_dev_page0[i].Header, sizeof(*mpt->mpt_dev_page0), 1011 FALSE, 5000); 1012 if (rv) { 1013 mpt_prt(mpt, 1014 "cannot read SPI Target %d Device Page 0\n", i); 1015 continue; 1016 } 1017 mpt2host_config_page_scsi_device_0(&mpt->mpt_dev_page0[i]); 1018 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 1019 "target %d page 0: Negotiated Params %x Information %x\n", 1020 i, mpt->mpt_dev_page0[i].NegotiatedParameters, 1021 mpt->mpt_dev_page0[i].Information); 1022 1023 rv = mpt_read_cur_cfg_page(mpt, i, 1024 &mpt->mpt_dev_page1[i].Header, sizeof(*mpt->mpt_dev_page1), 1025 FALSE, 5000); 1026 if (rv) { 1027 mpt_prt(mpt, 1028 "cannot read SPI Target %d Device Page 1\n", i); 1029 continue; 1030 } 1031 mpt2host_config_page_scsi_device_1(&mpt->mpt_dev_page1[i]); 1032 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 1033 "target %d page 1: Requested Params %x Configuration %x\n", 1034 i, mpt->mpt_dev_page1[i].RequestedParameters, 1035 mpt->mpt_dev_page1[i].Configuration); 1036 } 1037 return (0); 1038} 1039 1040/* 1041 * Validate SPI configuration information. 1042 * 1043 * In particular, validate SPI Port Page 1. 1044 */ 1045static int 1046mpt_set_initial_config_spi(struct mpt_softc *mpt) 1047{ 1048 int error, i, pp1val; 1049 1050 mpt->mpt_disc_enable = 0xff; 1051 mpt->mpt_tag_enable = 0; 1052 1053 pp1val = ((1 << mpt->mpt_ini_id) << 1054 MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID) | mpt->mpt_ini_id; 1055 if (mpt->mpt_port_page1.Configuration != pp1val) { 1056 CONFIG_PAGE_SCSI_PORT_1 tmp; 1057 1058 mpt_prt(mpt, "SPI Port Page 1 Config value bad (%x)- should " 1059 "be %x\n", mpt->mpt_port_page1.Configuration, pp1val); 1060 tmp = mpt->mpt_port_page1; 1061 tmp.Configuration = pp1val; 1062 host2mpt_config_page_scsi_port_1(&tmp); 1063 error = mpt_write_cur_cfg_page(mpt, 0, 1064 &tmp.Header, sizeof(tmp), FALSE, 5000); 1065 if (error) { 1066 return (-1); 1067 } 1068 error = mpt_read_cur_cfg_page(mpt, 0, 1069 &tmp.Header, sizeof(tmp), FALSE, 5000); 1070 if (error) { 1071 return (-1); 1072 } 1073 mpt2host_config_page_scsi_port_1(&tmp); 1074 if (tmp.Configuration != pp1val) { 1075 mpt_prt(mpt, 1076 "failed to reset SPI Port Page 1 Config value\n"); 1077 return (-1); 1078 } 1079 mpt->mpt_port_page1 = tmp; 1080 } 1081 1082 /* 1083 * The purpose of this exercise is to get 1084 * all targets back to async/narrow. 1085 * 1086 * We skip this step if the BIOS has already negotiated 1087 * speeds with the targets. 1088 */ 1089 i = mpt->mpt_port_page2.PortSettings & 1090 MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS; 1091 if (i == MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS) { 1092 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 1093 "honoring BIOS transfer negotiations\n"); 1094 } else { 1095 for (i = 0; i < 16; i++) { 1096 mpt->mpt_dev_page1[i].RequestedParameters = 0; 1097 mpt->mpt_dev_page1[i].Configuration = 0; 1098 (void) mpt_update_spi_config(mpt, i); 1099 } 1100 } 1101 return (0); 1102} 1103 1104static int 1105mpt_cam_enable(struct mpt_softc *mpt) 1106{ 1107 int error; 1108 1109 MPT_LOCK(mpt); 1110 1111 error = EIO; 1112 if (mpt->is_fc) { 1113 if (mpt_read_config_info_fc(mpt)) { 1114 goto out; 1115 } 1116 if (mpt_set_initial_config_fc(mpt)) { 1117 goto out; 1118 } 1119 } else if (mpt->is_sas) { 1120 if (mpt_read_config_info_sas(mpt)) { 1121 goto out; 1122 } 1123 if (mpt_set_initial_config_sas(mpt)) { 1124 goto out; 1125 } 1126 } else if (mpt->is_spi) { 1127 if (mpt_read_config_info_spi(mpt)) { 1128 goto out; 1129 } 1130 if (mpt_set_initial_config_spi(mpt)) { 1131 goto out; 1132 } 1133 } 1134 error = 0; 1135 1136out: 1137 MPT_UNLOCK(mpt); 1138 return (error); 1139} 1140 1141static void 1142mpt_cam_ready(struct mpt_softc *mpt) 1143{ 1144 1145 /* 1146 * If we're in target mode, hang out resources now 1147 * so we don't cause the world to hang talking to us. 1148 */ 1149 if (mpt->is_fc && (mpt->role & MPT_ROLE_TARGET)) { 1150 /* 1151 * Try to add some target command resources 1152 */ 1153 MPT_LOCK(mpt); 1154 if (mpt_add_target_commands(mpt) == FALSE) { 1155 mpt_prt(mpt, "failed to add target commands\n"); 1156 } 1157 MPT_UNLOCK(mpt); 1158 } 1159 mpt->ready = 1; 1160} 1161 1162static void 1163mpt_cam_detach(struct mpt_softc *mpt) 1164{ 1165 mpt_handler_t handler; 1166 1167 MPT_LOCK(mpt); 1168 mpt->ready = 0; 1169 mpt_terminate_recovery_thread(mpt); 1170 1171 handler.reply_handler = mpt_scsi_reply_handler; 1172 mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, 1173 scsi_io_handler_id); 1174 handler.reply_handler = mpt_scsi_tmf_reply_handler; 1175 mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, 1176 scsi_tmf_handler_id); 1177 handler.reply_handler = mpt_fc_els_reply_handler; 1178 mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, 1179 fc_els_handler_id); 1180 handler.reply_handler = mpt_scsi_tgt_reply_handler; 1181 mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, 1182 mpt->scsi_tgt_handler_id); 1183 handler.reply_handler = mpt_sata_pass_reply_handler; 1184 mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, 1185 sata_pass_handler_id); 1186 1187 if (mpt->tmf_req != NULL) { 1188 mpt->tmf_req->state = REQ_STATE_ALLOCATED; 1189 mpt_free_request(mpt, mpt->tmf_req); 1190 mpt->tmf_req = NULL; 1191 } 1192 if (mpt->sas_portinfo != NULL) { 1193 free(mpt->sas_portinfo, M_DEVBUF); 1194 mpt->sas_portinfo = NULL; 1195 } 1196 1197 if (mpt->sim != NULL) { 1198 xpt_free_path(mpt->path); 1199 xpt_bus_deregister(cam_sim_path(mpt->sim)); 1200 cam_sim_free(mpt->sim, TRUE); 1201 mpt->sim = NULL; 1202 } 1203 1204 if (mpt->phydisk_sim != NULL) { 1205 xpt_free_path(mpt->phydisk_path); 1206 xpt_bus_deregister(cam_sim_path(mpt->phydisk_sim)); 1207 cam_sim_free(mpt->phydisk_sim, TRUE); 1208 mpt->phydisk_sim = NULL; 1209 } 1210 MPT_UNLOCK(mpt); 1211} 1212 1213/* This routine is used after a system crash to dump core onto the swap device. 1214 */ 1215static void 1216mpt_poll(struct cam_sim *sim) 1217{ 1218 struct mpt_softc *mpt; 1219 1220 mpt = (struct mpt_softc *)cam_sim_softc(sim); 1221 mpt_intr(mpt); 1222} 1223 1224/* 1225 * Watchdog timeout routine for SCSI requests. 1226 */ 1227static void 1228mpt_timeout(void *arg) 1229{ 1230 union ccb *ccb; 1231 struct mpt_softc *mpt; 1232 request_t *req; 1233 1234 ccb = (union ccb *)arg; 1235 mpt = ccb->ccb_h.ccb_mpt_ptr; 1236 1237 MPT_LOCK_ASSERT(mpt); 1238 req = ccb->ccb_h.ccb_req_ptr; 1239 mpt_prt(mpt, "request %p:%u timed out for ccb %p (req->ccb %p)\n", req, 1240 req->serno, ccb, req->ccb); 1241/* XXX: WHAT ARE WE TRYING TO DO HERE? */ 1242 if ((req->state & REQ_STATE_QUEUED) == REQ_STATE_QUEUED) { 1243 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 1244 TAILQ_INSERT_TAIL(&mpt->request_timeout_list, req, links); 1245 req->state |= REQ_STATE_TIMEDOUT; 1246 mpt_wakeup_recovery_thread(mpt); 1247 } 1248} 1249 1250/* 1251 * Callback routine from bus_dmamap_load_ccb(9) or, in simple cases, called 1252 * directly. 1253 * 1254 * Takes a list of physical segments and builds the SGL for SCSI IO command 1255 * and forwards the commard to the IOC after one last check that CAM has not 1256 * aborted the transaction. 1257 */ 1258static void 1259mpt_execute_req_a64(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error) 1260{ 1261 request_t *req, *trq; 1262 char *mpt_off; 1263 union ccb *ccb; 1264 struct mpt_softc *mpt; 1265 bus_addr_t chain_list_addr; 1266 int first_lim, seg, this_seg_lim; 1267 uint32_t addr, cur_off, flags, nxt_off, tf; 1268 void *sglp = NULL; 1269 MSG_REQUEST_HEADER *hdrp; 1270 SGE_SIMPLE64 *se; 1271 SGE_CHAIN64 *ce; 1272 int istgt = 0; 1273 1274 req = (request_t *)arg; 1275 ccb = req->ccb; 1276 1277 mpt = ccb->ccb_h.ccb_mpt_ptr; 1278 req = ccb->ccb_h.ccb_req_ptr; 1279 1280 hdrp = req->req_vbuf; 1281 mpt_off = req->req_vbuf; 1282 1283 if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) { 1284 error = EFBIG; 1285 } 1286 1287 if (error == 0) { 1288 switch (hdrp->Function) { 1289 case MPI_FUNCTION_SCSI_IO_REQUEST: 1290 case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: 1291 istgt = 0; 1292 sglp = &((PTR_MSG_SCSI_IO_REQUEST)hdrp)->SGL; 1293 break; 1294 case MPI_FUNCTION_TARGET_ASSIST: 1295 istgt = 1; 1296 sglp = &((PTR_MSG_TARGET_ASSIST_REQUEST)hdrp)->SGL; 1297 break; 1298 default: 1299 mpt_prt(mpt, "bad fct 0x%x in mpt_execute_req_a64\n", 1300 hdrp->Function); 1301 error = EINVAL; 1302 break; 1303 } 1304 } 1305 1306 if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) { 1307 error = EFBIG; 1308 mpt_prt(mpt, "segment count %d too large (max %u)\n", 1309 nseg, mpt->max_seg_cnt); 1310 } 1311 1312bad: 1313 if (error != 0) { 1314 if (error != EFBIG && error != ENOMEM) { 1315 mpt_prt(mpt, "mpt_execute_req_a64: err %d\n", error); 1316 } 1317 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) { 1318 cam_status status; 1319 mpt_freeze_ccb(ccb); 1320 if (error == EFBIG) { 1321 status = CAM_REQ_TOO_BIG; 1322 } else if (error == ENOMEM) { 1323 if (mpt->outofbeer == 0) { 1324 mpt->outofbeer = 1; 1325 xpt_freeze_simq(mpt->sim, 1); 1326 mpt_lprt(mpt, MPT_PRT_DEBUG, 1327 "FREEZEQ\n"); 1328 } 1329 status = CAM_REQUEUE_REQ; 1330 } else { 1331 status = CAM_REQ_CMP_ERR; 1332 } 1333 mpt_set_ccb_status(ccb, status); 1334 } 1335 if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { 1336 request_t *cmd_req = 1337 MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); 1338 MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM; 1339 MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL; 1340 MPT_TGT_STATE(mpt, cmd_req)->req = NULL; 1341 } 1342 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 1343 KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d", __LINE__)); 1344 xpt_done(ccb); 1345 mpt_free_request(mpt, req); 1346 return; 1347 } 1348 1349 /* 1350 * No data to transfer? 1351 * Just make a single simple SGL with zero length. 1352 */ 1353 1354 if (mpt->verbose >= MPT_PRT_DEBUG) { 1355 int tidx = ((char *)sglp) - mpt_off; 1356 memset(&mpt_off[tidx], 0xff, MPT_REQUEST_AREA - tidx); 1357 } 1358 1359 if (nseg == 0) { 1360 SGE_SIMPLE32 *se1 = (SGE_SIMPLE32 *) sglp; 1361 MPI_pSGE_SET_FLAGS(se1, 1362 (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | 1363 MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST)); 1364 se1->FlagsLength = htole32(se1->FlagsLength); 1365 goto out; 1366 } 1367 1368 1369 flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_64_BIT_ADDRESSING; 1370 if (istgt == 0) { 1371 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 1372 flags |= MPI_SGE_FLAGS_HOST_TO_IOC; 1373 } 1374 } else { 1375 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 1376 flags |= MPI_SGE_FLAGS_HOST_TO_IOC; 1377 } 1378 } 1379 1380 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1381 bus_dmasync_op_t op; 1382 if (istgt == 0) { 1383 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 1384 op = BUS_DMASYNC_PREREAD; 1385 } else { 1386 op = BUS_DMASYNC_PREWRITE; 1387 } 1388 } else { 1389 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 1390 op = BUS_DMASYNC_PREWRITE; 1391 } else { 1392 op = BUS_DMASYNC_PREREAD; 1393 } 1394 } 1395 bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op); 1396 } 1397 1398 /* 1399 * Okay, fill in what we can at the end of the command frame. 1400 * If we have up to MPT_NSGL_FIRST, we can fit them all into 1401 * the command frame. 1402 * 1403 * Otherwise, we fill up through MPT_NSGL_FIRST less one 1404 * SIMPLE64 pointers and start doing CHAIN64 entries after 1405 * that. 1406 */ 1407 1408 if (nseg < MPT_NSGL_FIRST(mpt)) { 1409 first_lim = nseg; 1410 } else { 1411 /* 1412 * Leave room for CHAIN element 1413 */ 1414 first_lim = MPT_NSGL_FIRST(mpt) - 1; 1415 } 1416 1417 se = (SGE_SIMPLE64 *) sglp; 1418 for (seg = 0; seg < first_lim; seg++, se++, dm_segs++) { 1419 tf = flags; 1420 memset(se, 0, sizeof (*se)); 1421 MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len); 1422 se->Address.Low = htole32(dm_segs->ds_addr & 0xffffffff); 1423 if (sizeof(bus_addr_t) > 4) { 1424 addr = ((uint64_t)dm_segs->ds_addr) >> 32; 1425 /* SAS1078 36GB limitation WAR */ 1426 if (mpt->is_1078 && (((uint64_t)dm_segs->ds_addr + 1427 MPI_SGE_LENGTH(se->FlagsLength)) >> 32) == 9) { 1428 addr |= (1 << 31); 1429 tf |= MPI_SGE_FLAGS_LOCAL_ADDRESS; 1430 } 1431 se->Address.High = htole32(addr); 1432 } 1433 if (seg == first_lim - 1) { 1434 tf |= MPI_SGE_FLAGS_LAST_ELEMENT; 1435 } 1436 if (seg == nseg - 1) { 1437 tf |= MPI_SGE_FLAGS_END_OF_LIST | 1438 MPI_SGE_FLAGS_END_OF_BUFFER; 1439 } 1440 MPI_pSGE_SET_FLAGS(se, tf); 1441 se->FlagsLength = htole32(se->FlagsLength); 1442 } 1443 1444 if (seg == nseg) { 1445 goto out; 1446 } 1447 1448 /* 1449 * Tell the IOC where to find the first chain element. 1450 */ 1451 hdrp->ChainOffset = ((char *)se - (char *)hdrp) >> 2; 1452 nxt_off = MPT_RQSL(mpt); 1453 trq = req; 1454 1455 /* 1456 * Make up the rest of the data segments out of a chain element 1457 * (contained in the current request frame) which points to 1458 * SIMPLE64 elements in the next request frame, possibly ending 1459 * with *another* chain element (if there's more). 1460 */ 1461 while (seg < nseg) { 1462 /* 1463 * Point to the chain descriptor. Note that the chain 1464 * descriptor is at the end of the *previous* list (whether 1465 * chain or simple). 1466 */ 1467 ce = (SGE_CHAIN64 *) se; 1468 1469 /* 1470 * Before we change our current pointer, make sure we won't 1471 * overflow the request area with this frame. Note that we 1472 * test against 'greater than' here as it's okay in this case 1473 * to have next offset be just outside the request area. 1474 */ 1475 if ((nxt_off + MPT_RQSL(mpt)) > MPT_REQUEST_AREA) { 1476 nxt_off = MPT_REQUEST_AREA; 1477 goto next_chain; 1478 } 1479 1480 /* 1481 * Set our SGE element pointer to the beginning of the chain 1482 * list and update our next chain list offset. 1483 */ 1484 se = (SGE_SIMPLE64 *) &mpt_off[nxt_off]; 1485 cur_off = nxt_off; 1486 nxt_off += MPT_RQSL(mpt); 1487 1488 /* 1489 * Now initialize the chain descriptor. 1490 */ 1491 memset(ce, 0, sizeof (*ce)); 1492 1493 /* 1494 * Get the physical address of the chain list. 1495 */ 1496 chain_list_addr = trq->req_pbuf; 1497 chain_list_addr += cur_off; 1498 if (sizeof (bus_addr_t) > 4) { 1499 ce->Address.High = 1500 htole32(((uint64_t)chain_list_addr) >> 32); 1501 } 1502 ce->Address.Low = htole32(chain_list_addr & 0xffffffff); 1503 ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | 1504 MPI_SGE_FLAGS_64_BIT_ADDRESSING; 1505 1506 /* 1507 * If we have more than a frame's worth of segments left, 1508 * set up the chain list to have the last element be another 1509 * chain descriptor. 1510 */ 1511 if ((nseg - seg) > MPT_NSGL(mpt)) { 1512 this_seg_lim = seg + MPT_NSGL(mpt) - 1; 1513 /* 1514 * The length of the chain is the length in bytes of the 1515 * number of segments plus the next chain element. 1516 * 1517 * The next chain descriptor offset is the length, 1518 * in words, of the number of segments. 1519 */ 1520 ce->Length = (this_seg_lim - seg) * 1521 sizeof (SGE_SIMPLE64); 1522 ce->NextChainOffset = ce->Length >> 2; 1523 ce->Length += sizeof (SGE_CHAIN64); 1524 } else { 1525 this_seg_lim = nseg; 1526 ce->Length = (this_seg_lim - seg) * 1527 sizeof (SGE_SIMPLE64); 1528 } 1529 ce->Length = htole16(ce->Length); 1530 1531 /* 1532 * Fill in the chain list SGE elements with our segment data. 1533 * 1534 * If we're the last element in this chain list, set the last 1535 * element flag. If we're the completely last element period, 1536 * set the end of list and end of buffer flags. 1537 */ 1538 while (seg < this_seg_lim) { 1539 tf = flags; 1540 memset(se, 0, sizeof (*se)); 1541 MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len); 1542 se->Address.Low = htole32(dm_segs->ds_addr & 1543 0xffffffff); 1544 if (sizeof (bus_addr_t) > 4) { 1545 addr = ((uint64_t)dm_segs->ds_addr) >> 32; 1546 /* SAS1078 36GB limitation WAR */ 1547 if (mpt->is_1078 && 1548 (((uint64_t)dm_segs->ds_addr + 1549 MPI_SGE_LENGTH(se->FlagsLength)) >> 1550 32) == 9) { 1551 addr |= (1 << 31); 1552 tf |= MPI_SGE_FLAGS_LOCAL_ADDRESS; 1553 } 1554 se->Address.High = htole32(addr); 1555 } 1556 if (seg == this_seg_lim - 1) { 1557 tf |= MPI_SGE_FLAGS_LAST_ELEMENT; 1558 } 1559 if (seg == nseg - 1) { 1560 tf |= MPI_SGE_FLAGS_END_OF_LIST | 1561 MPI_SGE_FLAGS_END_OF_BUFFER; 1562 } 1563 MPI_pSGE_SET_FLAGS(se, tf); 1564 se->FlagsLength = htole32(se->FlagsLength); 1565 se++; 1566 seg++; 1567 dm_segs++; 1568 } 1569 1570 next_chain: 1571 /* 1572 * If we have more segments to do and we've used up all of 1573 * the space in a request area, go allocate another one 1574 * and chain to that. 1575 */ 1576 if (seg < nseg && nxt_off >= MPT_REQUEST_AREA) { 1577 request_t *nrq; 1578 1579 nrq = mpt_get_request(mpt, FALSE); 1580 1581 if (nrq == NULL) { 1582 error = ENOMEM; 1583 goto bad; 1584 } 1585 1586 /* 1587 * Append the new request area on the tail of our list. 1588 */ 1589 if ((trq = req->chain) == NULL) { 1590 req->chain = nrq; 1591 } else { 1592 while (trq->chain != NULL) { 1593 trq = trq->chain; 1594 } 1595 trq->chain = nrq; 1596 } 1597 trq = nrq; 1598 mpt_off = trq->req_vbuf; 1599 if (mpt->verbose >= MPT_PRT_DEBUG) { 1600 memset(mpt_off, 0xff, MPT_REQUEST_AREA); 1601 } 1602 nxt_off = 0; 1603 } 1604 } 1605out: 1606 1607 /* 1608 * Last time we need to check if this CCB needs to be aborted. 1609 */ 1610 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { 1611 if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { 1612 request_t *cmd_req = 1613 MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); 1614 MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM; 1615 MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL; 1616 MPT_TGT_STATE(mpt, cmd_req)->req = NULL; 1617 } 1618 mpt_prt(mpt, 1619 "mpt_execute_req_a64: I/O cancelled (status 0x%x)\n", 1620 ccb->ccb_h.status & CAM_STATUS_MASK); 1621 if (nseg) { 1622 bus_dmamap_unload(mpt->buffer_dmat, req->dmap); 1623 } 1624 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 1625 KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d", __LINE__)); 1626 xpt_done(ccb); 1627 mpt_free_request(mpt, req); 1628 return; 1629 } 1630 1631 ccb->ccb_h.status |= CAM_SIM_QUEUED; 1632 if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) { 1633 mpt_req_timeout(req, (ccb->ccb_h.timeout * hz) / 1000, 1634 mpt_timeout, ccb); 1635 } 1636 if (mpt->verbose > MPT_PRT_DEBUG) { 1637 int nc = 0; 1638 mpt_print_request(req->req_vbuf); 1639 for (trq = req->chain; trq; trq = trq->chain) { 1640 printf(" Additional Chain Area %d\n", nc++); 1641 mpt_dump_sgl(trq->req_vbuf, 0); 1642 } 1643 } 1644 1645 if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { 1646 request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); 1647 mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req); 1648#ifdef WE_TRUST_AUTO_GOOD_STATUS 1649 if ((ccb->ccb_h.flags & CAM_SEND_STATUS) && 1650 csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) { 1651 tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS; 1652 } else { 1653 tgt->state = TGT_STATE_MOVING_DATA; 1654 } 1655#else 1656 tgt->state = TGT_STATE_MOVING_DATA; 1657#endif 1658 } 1659 mpt_send_cmd(mpt, req); 1660} 1661 1662static void 1663mpt_execute_req(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error) 1664{ 1665 request_t *req, *trq; 1666 char *mpt_off; 1667 union ccb *ccb; 1668 struct mpt_softc *mpt; 1669 int seg, first_lim; 1670 uint32_t flags, nxt_off; 1671 void *sglp = NULL; 1672 MSG_REQUEST_HEADER *hdrp; 1673 SGE_SIMPLE32 *se; 1674 SGE_CHAIN32 *ce; 1675 int istgt = 0; 1676 1677 req = (request_t *)arg; 1678 ccb = req->ccb; 1679 1680 mpt = ccb->ccb_h.ccb_mpt_ptr; 1681 req = ccb->ccb_h.ccb_req_ptr; 1682 1683 hdrp = req->req_vbuf; 1684 mpt_off = req->req_vbuf; 1685 1686 if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) { 1687 error = EFBIG; 1688 } 1689 1690 if (error == 0) { 1691 switch (hdrp->Function) { 1692 case MPI_FUNCTION_SCSI_IO_REQUEST: 1693 case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: 1694 sglp = &((PTR_MSG_SCSI_IO_REQUEST)hdrp)->SGL; 1695 break; 1696 case MPI_FUNCTION_TARGET_ASSIST: 1697 istgt = 1; 1698 sglp = &((PTR_MSG_TARGET_ASSIST_REQUEST)hdrp)->SGL; 1699 break; 1700 default: 1701 mpt_prt(mpt, "bad fct 0x%x in mpt_execute_req\n", 1702 hdrp->Function); 1703 error = EINVAL; 1704 break; 1705 } 1706 } 1707 1708 if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) { 1709 error = EFBIG; 1710 mpt_prt(mpt, "segment count %d too large (max %u)\n", 1711 nseg, mpt->max_seg_cnt); 1712 } 1713 1714bad: 1715 if (error != 0) { 1716 if (error != EFBIG && error != ENOMEM) { 1717 mpt_prt(mpt, "mpt_execute_req: err %d\n", error); 1718 } 1719 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) { 1720 cam_status status; 1721 mpt_freeze_ccb(ccb); 1722 if (error == EFBIG) { 1723 status = CAM_REQ_TOO_BIG; 1724 } else if (error == ENOMEM) { 1725 if (mpt->outofbeer == 0) { 1726 mpt->outofbeer = 1; 1727 xpt_freeze_simq(mpt->sim, 1); 1728 mpt_lprt(mpt, MPT_PRT_DEBUG, 1729 "FREEZEQ\n"); 1730 } 1731 status = CAM_REQUEUE_REQ; 1732 } else { 1733 status = CAM_REQ_CMP_ERR; 1734 } 1735 mpt_set_ccb_status(ccb, status); 1736 } 1737 if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { 1738 request_t *cmd_req = 1739 MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); 1740 MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM; 1741 MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL; 1742 MPT_TGT_STATE(mpt, cmd_req)->req = NULL; 1743 } 1744 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 1745 KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d", __LINE__)); 1746 xpt_done(ccb); 1747 mpt_free_request(mpt, req); 1748 return; 1749 } 1750 1751 /* 1752 * No data to transfer? 1753 * Just make a single simple SGL with zero length. 1754 */ 1755 1756 if (mpt->verbose >= MPT_PRT_DEBUG) { 1757 int tidx = ((char *)sglp) - mpt_off; 1758 memset(&mpt_off[tidx], 0xff, MPT_REQUEST_AREA - tidx); 1759 } 1760 1761 if (nseg == 0) { 1762 SGE_SIMPLE32 *se1 = (SGE_SIMPLE32 *) sglp; 1763 MPI_pSGE_SET_FLAGS(se1, 1764 (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | 1765 MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST)); 1766 se1->FlagsLength = htole32(se1->FlagsLength); 1767 goto out; 1768 } 1769 1770 1771 flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT; 1772 if (istgt == 0) { 1773 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 1774 flags |= MPI_SGE_FLAGS_HOST_TO_IOC; 1775 } 1776 } else { 1777 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 1778 flags |= MPI_SGE_FLAGS_HOST_TO_IOC; 1779 } 1780 } 1781 1782 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1783 bus_dmasync_op_t op; 1784 if (istgt) { 1785 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 1786 op = BUS_DMASYNC_PREREAD; 1787 } else { 1788 op = BUS_DMASYNC_PREWRITE; 1789 } 1790 } else { 1791 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 1792 op = BUS_DMASYNC_PREWRITE; 1793 } else { 1794 op = BUS_DMASYNC_PREREAD; 1795 } 1796 } 1797 bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op); 1798 } 1799 1800 /* 1801 * Okay, fill in what we can at the end of the command frame. 1802 * If we have up to MPT_NSGL_FIRST, we can fit them all into 1803 * the command frame. 1804 * 1805 * Otherwise, we fill up through MPT_NSGL_FIRST less one 1806 * SIMPLE32 pointers and start doing CHAIN32 entries after 1807 * that. 1808 */ 1809 1810 if (nseg < MPT_NSGL_FIRST(mpt)) { 1811 first_lim = nseg; 1812 } else { 1813 /* 1814 * Leave room for CHAIN element 1815 */ 1816 first_lim = MPT_NSGL_FIRST(mpt) - 1; 1817 } 1818 1819 se = (SGE_SIMPLE32 *) sglp; 1820 for (seg = 0; seg < first_lim; seg++, se++, dm_segs++) { 1821 uint32_t tf; 1822 1823 memset(se, 0,sizeof (*se)); 1824 se->Address = htole32(dm_segs->ds_addr); 1825 1826 MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len); 1827 tf = flags; 1828 if (seg == first_lim - 1) { 1829 tf |= MPI_SGE_FLAGS_LAST_ELEMENT; 1830 } 1831 if (seg == nseg - 1) { 1832 tf |= MPI_SGE_FLAGS_END_OF_LIST | 1833 MPI_SGE_FLAGS_END_OF_BUFFER; 1834 } 1835 MPI_pSGE_SET_FLAGS(se, tf); 1836 se->FlagsLength = htole32(se->FlagsLength); 1837 } 1838 1839 if (seg == nseg) { 1840 goto out; 1841 } 1842 1843 /* 1844 * Tell the IOC where to find the first chain element. 1845 */ 1846 hdrp->ChainOffset = ((char *)se - (char *)hdrp) >> 2; 1847 nxt_off = MPT_RQSL(mpt); 1848 trq = req; 1849 1850 /* 1851 * Make up the rest of the data segments out of a chain element 1852 * (contained in the current request frame) which points to 1853 * SIMPLE32 elements in the next request frame, possibly ending 1854 * with *another* chain element (if there's more). 1855 */ 1856 while (seg < nseg) { 1857 int this_seg_lim; 1858 uint32_t tf, cur_off; 1859 bus_addr_t chain_list_addr; 1860 1861 /* 1862 * Point to the chain descriptor. Note that the chain 1863 * descriptor is at the end of the *previous* list (whether 1864 * chain or simple). 1865 */ 1866 ce = (SGE_CHAIN32 *) se; 1867 1868 /* 1869 * Before we change our current pointer, make sure we won't 1870 * overflow the request area with this frame. Note that we 1871 * test against 'greater than' here as it's okay in this case 1872 * to have next offset be just outside the request area. 1873 */ 1874 if ((nxt_off + MPT_RQSL(mpt)) > MPT_REQUEST_AREA) { 1875 nxt_off = MPT_REQUEST_AREA; 1876 goto next_chain; 1877 } 1878 1879 /* 1880 * Set our SGE element pointer to the beginning of the chain 1881 * list and update our next chain list offset. 1882 */ 1883 se = (SGE_SIMPLE32 *) &mpt_off[nxt_off]; 1884 cur_off = nxt_off; 1885 nxt_off += MPT_RQSL(mpt); 1886 1887 /* 1888 * Now initialize the chain descriptor. 1889 */ 1890 memset(ce, 0, sizeof (*ce)); 1891 1892 /* 1893 * Get the physical address of the chain list. 1894 */ 1895 chain_list_addr = trq->req_pbuf; 1896 chain_list_addr += cur_off; 1897 1898 1899 1900 ce->Address = htole32(chain_list_addr); 1901 ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; 1902 1903 1904 /* 1905 * If we have more than a frame's worth of segments left, 1906 * set up the chain list to have the last element be another 1907 * chain descriptor. 1908 */ 1909 if ((nseg - seg) > MPT_NSGL(mpt)) { 1910 this_seg_lim = seg + MPT_NSGL(mpt) - 1; 1911 /* 1912 * The length of the chain is the length in bytes of the 1913 * number of segments plus the next chain element. 1914 * 1915 * The next chain descriptor offset is the length, 1916 * in words, of the number of segments. 1917 */ 1918 ce->Length = (this_seg_lim - seg) * 1919 sizeof (SGE_SIMPLE32); 1920 ce->NextChainOffset = ce->Length >> 2; 1921 ce->Length += sizeof (SGE_CHAIN32); 1922 } else { 1923 this_seg_lim = nseg; 1924 ce->Length = (this_seg_lim - seg) * 1925 sizeof (SGE_SIMPLE32); 1926 } 1927 ce->Length = htole16(ce->Length); 1928 1929 /* 1930 * Fill in the chain list SGE elements with our segment data. 1931 * 1932 * If we're the last element in this chain list, set the last 1933 * element flag. If we're the completely last element period, 1934 * set the end of list and end of buffer flags. 1935 */ 1936 while (seg < this_seg_lim) { 1937 memset(se, 0, sizeof (*se)); 1938 se->Address = htole32(dm_segs->ds_addr); 1939 1940 MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len); 1941 tf = flags; 1942 if (seg == this_seg_lim - 1) { 1943 tf |= MPI_SGE_FLAGS_LAST_ELEMENT; 1944 } 1945 if (seg == nseg - 1) { 1946 tf |= MPI_SGE_FLAGS_END_OF_LIST | 1947 MPI_SGE_FLAGS_END_OF_BUFFER; 1948 } 1949 MPI_pSGE_SET_FLAGS(se, tf); 1950 se->FlagsLength = htole32(se->FlagsLength); 1951 se++; 1952 seg++; 1953 dm_segs++; 1954 } 1955 1956 next_chain: 1957 /* 1958 * If we have more segments to do and we've used up all of 1959 * the space in a request area, go allocate another one 1960 * and chain to that. 1961 */ 1962 if (seg < nseg && nxt_off >= MPT_REQUEST_AREA) { 1963 request_t *nrq; 1964 1965 nrq = mpt_get_request(mpt, FALSE); 1966 1967 if (nrq == NULL) { 1968 error = ENOMEM; 1969 goto bad; 1970 } 1971 1972 /* 1973 * Append the new request area on the tail of our list. 1974 */ 1975 if ((trq = req->chain) == NULL) { 1976 req->chain = nrq; 1977 } else { 1978 while (trq->chain != NULL) { 1979 trq = trq->chain; 1980 } 1981 trq->chain = nrq; 1982 } 1983 trq = nrq; 1984 mpt_off = trq->req_vbuf; 1985 if (mpt->verbose >= MPT_PRT_DEBUG) { 1986 memset(mpt_off, 0xff, MPT_REQUEST_AREA); 1987 } 1988 nxt_off = 0; 1989 } 1990 } 1991out: 1992 1993 /* 1994 * Last time we need to check if this CCB needs to be aborted. 1995 */ 1996 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { 1997 if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { 1998 request_t *cmd_req = 1999 MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); 2000 MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM; 2001 MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL; 2002 MPT_TGT_STATE(mpt, cmd_req)->req = NULL; 2003 } 2004 mpt_prt(mpt, 2005 "mpt_execute_req: I/O cancelled (status 0x%x)\n", 2006 ccb->ccb_h.status & CAM_STATUS_MASK); 2007 if (nseg) { 2008 bus_dmamap_unload(mpt->buffer_dmat, req->dmap); 2009 } 2010 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 2011 KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d", __LINE__)); 2012 xpt_done(ccb); 2013 mpt_free_request(mpt, req); 2014 return; 2015 } 2016 2017 ccb->ccb_h.status |= CAM_SIM_QUEUED; 2018 if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) { 2019 mpt_req_timeout(req, (ccb->ccb_h.timeout * hz) / 1000, 2020 mpt_timeout, ccb); 2021 } 2022 if (mpt->verbose > MPT_PRT_DEBUG) { 2023 int nc = 0; 2024 mpt_print_request(req->req_vbuf); 2025 for (trq = req->chain; trq; trq = trq->chain) { 2026 printf(" Additional Chain Area %d\n", nc++); 2027 mpt_dump_sgl(trq->req_vbuf, 0); 2028 } 2029 } 2030 2031 if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { 2032 request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); 2033 mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req); 2034#ifdef WE_TRUST_AUTO_GOOD_STATUS 2035 if ((ccb->ccb_h.flags & CAM_SEND_STATUS) && 2036 csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) { 2037 tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS; 2038 } else { 2039 tgt->state = TGT_STATE_MOVING_DATA; 2040 } 2041#else 2042 tgt->state = TGT_STATE_MOVING_DATA; 2043#endif 2044 } 2045 mpt_send_cmd(mpt, req); 2046} 2047 2048static void 2049mpt_start(struct cam_sim *sim, union ccb *ccb) 2050{ 2051 request_t *req; 2052 struct mpt_softc *mpt; 2053 MSG_SCSI_IO_REQUEST *mpt_req; 2054 struct ccb_scsiio *csio = &ccb->csio; 2055 struct ccb_hdr *ccbh = &ccb->ccb_h; 2056 bus_dmamap_callback_t *cb; 2057 target_id_t tgt; 2058 int raid_passthru; 2059 int error; 2060 2061 /* Get the pointer for the physical addapter */ 2062 mpt = ccb->ccb_h.ccb_mpt_ptr; 2063 raid_passthru = (sim == mpt->phydisk_sim); 2064 2065 if ((req = mpt_get_request(mpt, FALSE)) == NULL) { 2066 if (mpt->outofbeer == 0) { 2067 mpt->outofbeer = 1; 2068 xpt_freeze_simq(mpt->sim, 1); 2069 mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n"); 2070 } 2071 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 2072 mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ); 2073 xpt_done(ccb); 2074 return; 2075 } 2076#ifdef INVARIANTS 2077 mpt_req_not_spcl(mpt, req, "mpt_start", __LINE__); 2078#endif 2079 2080 if (sizeof (bus_addr_t) > 4) { 2081 cb = mpt_execute_req_a64; 2082 } else { 2083 cb = mpt_execute_req; 2084 } 2085 2086 /* 2087 * Link the ccb and the request structure so we can find 2088 * the other knowing either the request or the ccb 2089 */ 2090 req->ccb = ccb; 2091 ccb->ccb_h.ccb_req_ptr = req; 2092 2093 /* Now we build the command for the IOC */ 2094 mpt_req = req->req_vbuf; 2095 memset(mpt_req, 0, sizeof (MSG_SCSI_IO_REQUEST)); 2096 2097 mpt_req->Function = MPI_FUNCTION_SCSI_IO_REQUEST; 2098 if (raid_passthru) { 2099 mpt_req->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; 2100 if (mpt_map_physdisk(mpt, ccb, &tgt) != 0) { 2101 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 2102 mpt_set_ccb_status(ccb, CAM_DEV_NOT_THERE); 2103 xpt_done(ccb); 2104 return; 2105 } 2106 mpt_req->Bus = 0; /* we never set bus here */ 2107 } else { 2108 tgt = ccb->ccb_h.target_id; 2109 mpt_req->Bus = 0; /* XXX */ 2110 2111 } 2112 mpt_req->SenseBufferLength = 2113 (csio->sense_len < MPT_SENSE_SIZE) ? 2114 csio->sense_len : MPT_SENSE_SIZE; 2115 2116 /* 2117 * We use the message context to find the request structure when we 2118 * Get the command completion interrupt from the IOC. 2119 */ 2120 mpt_req->MsgContext = htole32(req->index | scsi_io_handler_id); 2121 2122 /* Which physical device to do the I/O on */ 2123 mpt_req->TargetID = tgt; 2124 2125 /* We assume a single level LUN type */ 2126 if (ccb->ccb_h.target_lun >= MPT_MAX_LUNS) { 2127 mpt_req->LUN[0] = 0x40 | ((ccb->ccb_h.target_lun >> 8) & 0x3f); 2128 mpt_req->LUN[1] = ccb->ccb_h.target_lun & 0xff; 2129 } else { 2130 mpt_req->LUN[1] = ccb->ccb_h.target_lun; 2131 } 2132 2133 /* Set the direction of the transfer */ 2134 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 2135 mpt_req->Control = MPI_SCSIIO_CONTROL_READ; 2136 } else if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 2137 mpt_req->Control = MPI_SCSIIO_CONTROL_WRITE; 2138 } else { 2139 mpt_req->Control = MPI_SCSIIO_CONTROL_NODATATRANSFER; 2140 } 2141 2142 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0) { 2143 switch(ccb->csio.tag_action) { 2144 case MSG_HEAD_OF_Q_TAG: 2145 mpt_req->Control |= MPI_SCSIIO_CONTROL_HEADOFQ; 2146 break; 2147 case MSG_ACA_TASK: 2148 mpt_req->Control |= MPI_SCSIIO_CONTROL_ACAQ; 2149 break; 2150 case MSG_ORDERED_Q_TAG: 2151 mpt_req->Control |= MPI_SCSIIO_CONTROL_ORDEREDQ; 2152 break; 2153 case MSG_SIMPLE_Q_TAG: 2154 default: 2155 mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ; 2156 break; 2157 } 2158 } else { 2159 if (mpt->is_fc || mpt->is_sas) { 2160 mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ; 2161 } else { 2162 /* XXX No such thing for a target doing packetized. */ 2163 mpt_req->Control |= MPI_SCSIIO_CONTROL_UNTAGGED; 2164 } 2165 } 2166 2167 if (mpt->is_spi) { 2168 if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) { 2169 mpt_req->Control |= MPI_SCSIIO_CONTROL_NO_DISCONNECT; 2170 } 2171 } 2172 mpt_req->Control = htole32(mpt_req->Control); 2173 2174 /* Copy the scsi command block into place */ 2175 if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) { 2176 bcopy(csio->cdb_io.cdb_ptr, mpt_req->CDB, csio->cdb_len); 2177 } else { 2178 bcopy(csio->cdb_io.cdb_bytes, mpt_req->CDB, csio->cdb_len); 2179 } 2180 2181 mpt_req->CDBLength = csio->cdb_len; 2182 mpt_req->DataLength = htole32(csio->dxfer_len); 2183 mpt_req->SenseBufferLowAddr = htole32(req->sense_pbuf); 2184 2185 /* 2186 * Do a *short* print here if we're set to MPT_PRT_DEBUG 2187 */ 2188 if (mpt->verbose == MPT_PRT_DEBUG) { 2189 U32 df; 2190 mpt_prt(mpt, "mpt_start: %s op 0x%x ", 2191 (mpt_req->Function == MPI_FUNCTION_SCSI_IO_REQUEST)? 2192 "SCSI_IO_REQUEST" : "SCSI_IO_PASSTHRU", mpt_req->CDB[0]); 2193 df = mpt_req->Control & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK; 2194 if (df != MPI_SCSIIO_CONTROL_NODATATRANSFER) { 2195 mpt_prtc(mpt, "(%s %u byte%s ", 2196 (df == MPI_SCSIIO_CONTROL_READ)? 2197 "read" : "write", csio->dxfer_len, 2198 (csio->dxfer_len == 1)? ")" : "s)"); 2199 } 2200 mpt_prtc(mpt, "tgt %u lun %u req %p:%u\n", tgt, 2201 ccb->ccb_h.target_lun, req, req->serno); 2202 } 2203 2204 error = bus_dmamap_load_ccb(mpt->buffer_dmat, req->dmap, ccb, cb, 2205 req, 0); 2206 if (error == EINPROGRESS) { 2207 /* 2208 * So as to maintain ordering, freeze the controller queue 2209 * until our mapping is returned. 2210 */ 2211 xpt_freeze_simq(mpt->sim, 1); 2212 ccbh->status |= CAM_RELEASE_SIMQ; 2213 } 2214} 2215 2216static int 2217mpt_bus_reset(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun, 2218 int sleep_ok) 2219{ 2220 int error; 2221 uint16_t status; 2222 uint8_t response; 2223 2224 error = mpt_scsi_send_tmf(mpt, 2225 (tgt != CAM_TARGET_WILDCARD || lun != CAM_LUN_WILDCARD) ? 2226 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET : 2227 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, 2228 mpt->is_fc ? MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION : 0, 2229 0, /* XXX How do I get the channel ID? */ 2230 tgt != CAM_TARGET_WILDCARD ? tgt : 0, 2231 lun != CAM_LUN_WILDCARD ? lun : 0, 2232 0, sleep_ok); 2233 2234 if (error != 0) { 2235 /* 2236 * mpt_scsi_send_tmf hard resets on failure, so no 2237 * need to do so here. 2238 */ 2239 mpt_prt(mpt, 2240 "mpt_bus_reset: mpt_scsi_send_tmf returned %d\n", error); 2241 return (EIO); 2242 } 2243 2244 /* Wait for bus reset to be processed by the IOC. */ 2245 error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_DONE, 2246 REQ_STATE_DONE, sleep_ok, 5000); 2247 2248 status = le16toh(mpt->tmf_req->IOCStatus); 2249 response = mpt->tmf_req->ResponseCode; 2250 mpt->tmf_req->state = REQ_STATE_FREE; 2251 2252 if (error) { 2253 mpt_prt(mpt, "mpt_bus_reset: Reset timed-out. " 2254 "Resetting controller.\n"); 2255 mpt_reset(mpt, TRUE); 2256 return (ETIMEDOUT); 2257 } 2258 2259 if ((status & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 2260 mpt_prt(mpt, "mpt_bus_reset: TMF IOC Status 0x%x. " 2261 "Resetting controller.\n", status); 2262 mpt_reset(mpt, TRUE); 2263 return (EIO); 2264 } 2265 2266 if (response != MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED && 2267 response != MPI_SCSITASKMGMT_RSP_TM_COMPLETE) { 2268 mpt_prt(mpt, "mpt_bus_reset: TMF Response 0x%x. " 2269 "Resetting controller.\n", response); 2270 mpt_reset(mpt, TRUE); 2271 return (EIO); 2272 } 2273 return (0); 2274} 2275 2276static int 2277mpt_fc_reset_link(struct mpt_softc *mpt, int dowait) 2278{ 2279 int r = 0; 2280 request_t *req; 2281 PTR_MSG_FC_PRIMITIVE_SEND_REQUEST fc; 2282 2283 req = mpt_get_request(mpt, FALSE); 2284 if (req == NULL) { 2285 return (ENOMEM); 2286 } 2287 fc = req->req_vbuf; 2288 memset(fc, 0, sizeof(*fc)); 2289 fc->SendFlags = MPI_FC_PRIM_SEND_FLAGS_RESET_LINK; 2290 fc->Function = MPI_FUNCTION_FC_PRIMITIVE_SEND; 2291 fc->MsgContext = htole32(req->index | fc_els_handler_id); 2292 mpt_send_cmd(mpt, req); 2293 if (dowait) { 2294 r = mpt_wait_req(mpt, req, REQ_STATE_DONE, 2295 REQ_STATE_DONE, FALSE, 60 * 1000); 2296 if (r == 0) { 2297 mpt_free_request(mpt, req); 2298 } 2299 } 2300 return (r); 2301} 2302 2303static int 2304mpt_cam_event(struct mpt_softc *mpt, request_t *req, 2305 MSG_EVENT_NOTIFY_REPLY *msg) 2306{ 2307 uint32_t data0, data1; 2308 2309 data0 = le32toh(msg->Data[0]); 2310 data1 = le32toh(msg->Data[1]); 2311 switch(msg->Event & 0xFF) { 2312 case MPI_EVENT_UNIT_ATTENTION: 2313 mpt_prt(mpt, "UNIT ATTENTION: Bus: 0x%02x TargetID: 0x%02x\n", 2314 (data0 >> 8) & 0xff, data0 & 0xff); 2315 break; 2316 2317 case MPI_EVENT_IOC_BUS_RESET: 2318 /* We generated a bus reset */ 2319 mpt_prt(mpt, "IOC Generated Bus Reset Port: %d\n", 2320 (data0 >> 8) & 0xff); 2321 xpt_async(AC_BUS_RESET, mpt->path, NULL); 2322 break; 2323 2324 case MPI_EVENT_EXT_BUS_RESET: 2325 /* Someone else generated a bus reset */ 2326 mpt_prt(mpt, "External Bus Reset Detected\n"); 2327 /* 2328 * These replies don't return EventData like the MPI 2329 * spec says they do 2330 */ 2331 xpt_async(AC_BUS_RESET, mpt->path, NULL); 2332 break; 2333 2334 case MPI_EVENT_RESCAN: 2335 { 2336 union ccb *ccb; 2337 uint32_t pathid; 2338 /* 2339 * In general this means a device has been added to the loop. 2340 */ 2341 mpt_prt(mpt, "Rescan Port: %d\n", (data0 >> 8) & 0xff); 2342 if (mpt->ready == 0) { 2343 break; 2344 } 2345 if (mpt->phydisk_sim) { 2346 pathid = cam_sim_path(mpt->phydisk_sim); 2347 } else { 2348 pathid = cam_sim_path(mpt->sim); 2349 } 2350 /* 2351 * Allocate a CCB, create a wildcard path for this bus, 2352 * and schedule a rescan. 2353 */ 2354 ccb = xpt_alloc_ccb_nowait(); 2355 if (ccb == NULL) { 2356 mpt_prt(mpt, "unable to alloc CCB for rescan\n"); 2357 break; 2358 } 2359 2360 if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid, 2361 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 2362 mpt_prt(mpt, "unable to create path for rescan\n"); 2363 xpt_free_ccb(ccb); 2364 break; 2365 } 2366 xpt_rescan(ccb); 2367 break; 2368 } 2369 2370 case MPI_EVENT_LINK_STATUS_CHANGE: 2371 mpt_prt(mpt, "Port %d: LinkState: %s\n", 2372 (data1 >> 8) & 0xff, 2373 ((data0 & 0xff) == 0)? "Failed" : "Active"); 2374 break; 2375 2376 case MPI_EVENT_LOOP_STATE_CHANGE: 2377 switch ((data0 >> 16) & 0xff) { 2378 case 0x01: 2379 mpt_prt(mpt, 2380 "Port 0x%x: FC LinkEvent: LIP(%02x,%02x) " 2381 "(Loop Initialization)\n", 2382 (data1 >> 8) & 0xff, 2383 (data0 >> 8) & 0xff, 2384 (data0 ) & 0xff); 2385 switch ((data0 >> 8) & 0xff) { 2386 case 0xF7: 2387 if ((data0 & 0xff) == 0xF7) { 2388 mpt_prt(mpt, "Device needs AL_PA\n"); 2389 } else { 2390 mpt_prt(mpt, "Device %02x doesn't like " 2391 "FC performance\n", 2392 data0 & 0xFF); 2393 } 2394 break; 2395 case 0xF8: 2396 if ((data0 & 0xff) == 0xF7) { 2397 mpt_prt(mpt, "Device had loop failure " 2398 "at its receiver prior to acquiring" 2399 " AL_PA\n"); 2400 } else { 2401 mpt_prt(mpt, "Device %02x detected loop" 2402 " failure at its receiver\n", 2403 data0 & 0xFF); 2404 } 2405 break; 2406 default: 2407 mpt_prt(mpt, "Device %02x requests that device " 2408 "%02x reset itself\n", 2409 data0 & 0xFF, 2410 (data0 >> 8) & 0xFF); 2411 break; 2412 } 2413 break; 2414 case 0x02: 2415 mpt_prt(mpt, "Port 0x%x: FC LinkEvent: " 2416 "LPE(%02x,%02x) (Loop Port Enable)\n", 2417 (data1 >> 8) & 0xff, /* Port */ 2418 (data0 >> 8) & 0xff, /* Character 3 */ 2419 (data0 ) & 0xff /* Character 4 */); 2420 break; 2421 case 0x03: 2422 mpt_prt(mpt, "Port 0x%x: FC LinkEvent: " 2423 "LPB(%02x,%02x) (Loop Port Bypass)\n", 2424 (data1 >> 8) & 0xff, /* Port */ 2425 (data0 >> 8) & 0xff, /* Character 3 */ 2426 (data0 ) & 0xff /* Character 4 */); 2427 break; 2428 default: 2429 mpt_prt(mpt, "Port 0x%x: FC LinkEvent: Unknown " 2430 "FC event (%02x %02x %02x)\n", 2431 (data1 >> 8) & 0xff, /* Port */ 2432 (data0 >> 16) & 0xff, /* Event */ 2433 (data0 >> 8) & 0xff, /* Character 3 */ 2434 (data0 ) & 0xff /* Character 4 */); 2435 } 2436 break; 2437 2438 case MPI_EVENT_LOGOUT: 2439 mpt_prt(mpt, "FC Logout Port: %d N_PortID: %02x\n", 2440 (data1 >> 8) & 0xff, data0); 2441 break; 2442 case MPI_EVENT_QUEUE_FULL: 2443 { 2444 struct cam_sim *sim; 2445 struct cam_path *tmppath; 2446 struct ccb_relsim crs; 2447 PTR_EVENT_DATA_QUEUE_FULL pqf; 2448 lun_id_t lun_id; 2449 2450 pqf = (PTR_EVENT_DATA_QUEUE_FULL)msg->Data; 2451 pqf->CurrentDepth = le16toh(pqf->CurrentDepth); 2452 mpt_prt(mpt, "QUEUE FULL EVENT: Bus 0x%02x Target 0x%02x Depth " 2453 "%d\n", pqf->Bus, pqf->TargetID, pqf->CurrentDepth); 2454 if (mpt->phydisk_sim && mpt_is_raid_member(mpt, 2455 pqf->TargetID) != 0) { 2456 sim = mpt->phydisk_sim; 2457 } else { 2458 sim = mpt->sim; 2459 } 2460 for (lun_id = 0; lun_id < MPT_MAX_LUNS; lun_id++) { 2461 if (xpt_create_path(&tmppath, NULL, cam_sim_path(sim), 2462 pqf->TargetID, lun_id) != CAM_REQ_CMP) { 2463 mpt_prt(mpt, "unable to create a path to send " 2464 "XPT_REL_SIMQ"); 2465 break; 2466 } 2467 xpt_setup_ccb(&crs.ccb_h, tmppath, 5); 2468 crs.ccb_h.func_code = XPT_REL_SIMQ; 2469 crs.ccb_h.flags = CAM_DEV_QFREEZE; 2470 crs.release_flags = RELSIM_ADJUST_OPENINGS; 2471 crs.openings = pqf->CurrentDepth - 1; 2472 xpt_action((union ccb *)&crs); 2473 if (crs.ccb_h.status != CAM_REQ_CMP) { 2474 mpt_prt(mpt, "XPT_REL_SIMQ failed\n"); 2475 } 2476 xpt_free_path(tmppath); 2477 } 2478 break; 2479 } 2480 case MPI_EVENT_IR_RESYNC_UPDATE: 2481 mpt_prt(mpt, "IR resync update %d completed\n", 2482 (data0 >> 16) & 0xff); 2483 break; 2484 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 2485 { 2486 union ccb *ccb; 2487 struct cam_sim *sim; 2488 struct cam_path *tmppath; 2489 PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE psdsc; 2490 2491 psdsc = (PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE)msg->Data; 2492 if (mpt->phydisk_sim && mpt_is_raid_member(mpt, 2493 psdsc->TargetID) != 0) 2494 sim = mpt->phydisk_sim; 2495 else 2496 sim = mpt->sim; 2497 switch(psdsc->ReasonCode) { 2498 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: 2499 ccb = xpt_alloc_ccb_nowait(); 2500 if (ccb == NULL) { 2501 mpt_prt(mpt, 2502 "unable to alloc CCB for rescan\n"); 2503 break; 2504 } 2505 if (xpt_create_path(&ccb->ccb_h.path, NULL, 2506 cam_sim_path(sim), psdsc->TargetID, 2507 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 2508 mpt_prt(mpt, 2509 "unable to create path for rescan\n"); 2510 xpt_free_ccb(ccb); 2511 break; 2512 } 2513 xpt_rescan(ccb); 2514 break; 2515 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: 2516 if (xpt_create_path(&tmppath, NULL, cam_sim_path(sim), 2517 psdsc->TargetID, CAM_LUN_WILDCARD) != 2518 CAM_REQ_CMP) { 2519 mpt_prt(mpt, 2520 "unable to create path for async event"); 2521 break; 2522 } 2523 xpt_async(AC_LOST_DEVICE, tmppath, NULL); 2524 xpt_free_path(tmppath); 2525 break; 2526 case MPI_EVENT_SAS_DEV_STAT_RC_CMPL_INTERNAL_DEV_RESET: 2527 case MPI_EVENT_SAS_DEV_STAT_RC_CMPL_TASK_ABORT_INTERNAL: 2528 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: 2529 break; 2530 default: 2531 mpt_lprt(mpt, MPT_PRT_WARN, 2532 "SAS device status change: Bus: 0x%02x TargetID: " 2533 "0x%02x ReasonCode: 0x%02x\n", psdsc->Bus, 2534 psdsc->TargetID, psdsc->ReasonCode); 2535 break; 2536 } 2537 break; 2538 } 2539 case MPI_EVENT_SAS_DISCOVERY_ERROR: 2540 { 2541 PTR_EVENT_DATA_DISCOVERY_ERROR pde; 2542 2543 pde = (PTR_EVENT_DATA_DISCOVERY_ERROR)msg->Data; 2544 pde->DiscoveryStatus = le32toh(pde->DiscoveryStatus); 2545 mpt_lprt(mpt, MPT_PRT_WARN, 2546 "SAS discovery error: Port: 0x%02x Status: 0x%08x\n", 2547 pde->Port, pde->DiscoveryStatus); 2548 break; 2549 } 2550 case MPI_EVENT_EVENT_CHANGE: 2551 case MPI_EVENT_INTEGRATED_RAID: 2552 case MPI_EVENT_IR2: 2553 case MPI_EVENT_LOG_ENTRY_ADDED: 2554 case MPI_EVENT_SAS_DISCOVERY: 2555 case MPI_EVENT_SAS_PHY_LINK_STATUS: 2556 case MPI_EVENT_SAS_SES: 2557 break; 2558 default: 2559 mpt_lprt(mpt, MPT_PRT_WARN, "mpt_cam_event: 0x%x\n", 2560 msg->Event & 0xFF); 2561 return (0); 2562 } 2563 return (1); 2564} 2565 2566/* 2567 * Reply path for all SCSI I/O requests, called from our 2568 * interrupt handler by extracting our handler index from 2569 * the MsgContext field of the reply from the IOC. 2570 * 2571 * This routine is optimized for the common case of a 2572 * completion without error. All exception handling is 2573 * offloaded to non-inlined helper routines to minimize 2574 * cache footprint. 2575 */ 2576static int 2577mpt_scsi_reply_handler(struct mpt_softc *mpt, request_t *req, 2578 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 2579{ 2580 MSG_SCSI_IO_REQUEST *scsi_req; 2581 union ccb *ccb; 2582 2583 if (req->state == REQ_STATE_FREE) { 2584 mpt_prt(mpt, "mpt_scsi_reply_handler: req already free\n"); 2585 return (TRUE); 2586 } 2587 2588 scsi_req = (MSG_SCSI_IO_REQUEST *)req->req_vbuf; 2589 ccb = req->ccb; 2590 if (ccb == NULL) { 2591 mpt_prt(mpt, "mpt_scsi_reply_handler: req %p:%u with no ccb\n", 2592 req, req->serno); 2593 return (TRUE); 2594 } 2595 2596 mpt_req_untimeout(req, mpt_timeout, ccb); 2597 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 2598 2599 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 2600 bus_dmasync_op_t op; 2601 2602 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 2603 op = BUS_DMASYNC_POSTREAD; 2604 else 2605 op = BUS_DMASYNC_POSTWRITE; 2606 bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op); 2607 bus_dmamap_unload(mpt->buffer_dmat, req->dmap); 2608 } 2609 2610 if (reply_frame == NULL) { 2611 /* 2612 * Context only reply, completion without error status. 2613 */ 2614 ccb->csio.resid = 0; 2615 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 2616 ccb->csio.scsi_status = SCSI_STATUS_OK; 2617 } else { 2618 mpt_scsi_reply_frame_handler(mpt, req, reply_frame); 2619 } 2620 2621 if (mpt->outofbeer) { 2622 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 2623 mpt->outofbeer = 0; 2624 mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n"); 2625 } 2626 if (scsi_req->CDB[0] == INQUIRY && (scsi_req->CDB[1] & SI_EVPD) == 0) { 2627 struct scsi_inquiry_data *iq = 2628 (struct scsi_inquiry_data *)ccb->csio.data_ptr; 2629 if (scsi_req->Function == 2630 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { 2631 /* 2632 * Fake out the device type so that only the 2633 * pass-thru device will attach. 2634 */ 2635 iq->device &= ~0x1F; 2636 iq->device |= T_NODEVICE; 2637 } 2638 } 2639 if (mpt->verbose == MPT_PRT_DEBUG) { 2640 mpt_prt(mpt, "mpt_scsi_reply_handler: %p:%u complete\n", 2641 req, req->serno); 2642 } 2643 KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d", __LINE__)); 2644 xpt_done(ccb); 2645 if ((req->state & REQ_STATE_TIMEDOUT) == 0) { 2646 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 2647 } else { 2648 mpt_prt(mpt, "completing timedout/aborted req %p:%u\n", 2649 req, req->serno); 2650 TAILQ_REMOVE(&mpt->request_timeout_list, req, links); 2651 } 2652 KASSERT((req->state & REQ_STATE_NEED_WAKEUP) == 0, 2653 ("CCB req needed wakeup")); 2654#ifdef INVARIANTS 2655 mpt_req_not_spcl(mpt, req, "mpt_scsi_reply_handler", __LINE__); 2656#endif 2657 mpt_free_request(mpt, req); 2658 return (TRUE); 2659} 2660 2661static int 2662mpt_scsi_tmf_reply_handler(struct mpt_softc *mpt, request_t *req, 2663 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 2664{ 2665 MSG_SCSI_TASK_MGMT_REPLY *tmf_reply; 2666 2667 KASSERT(req == mpt->tmf_req, ("TMF Reply not using mpt->tmf_req")); 2668#ifdef INVARIANTS 2669 mpt_req_not_spcl(mpt, req, "mpt_scsi_tmf_reply_handler", __LINE__); 2670#endif 2671 tmf_reply = (MSG_SCSI_TASK_MGMT_REPLY *)reply_frame; 2672 /* Record IOC Status and Response Code of TMF for any waiters. */ 2673 req->IOCStatus = le16toh(tmf_reply->IOCStatus); 2674 req->ResponseCode = tmf_reply->ResponseCode; 2675 2676 mpt_lprt(mpt, MPT_PRT_DEBUG, "TMF complete: req %p:%u status 0x%x\n", 2677 req, req->serno, le16toh(tmf_reply->IOCStatus)); 2678 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 2679 if ((req->state & REQ_STATE_NEED_WAKEUP) != 0) { 2680 req->state |= REQ_STATE_DONE; 2681 wakeup(req); 2682 } else { 2683 mpt->tmf_req->state = REQ_STATE_FREE; 2684 } 2685 return (TRUE); 2686} 2687 2688/* 2689 * XXX: Move to definitions file 2690 */ 2691#define ELS 0x22 2692#define FC4LS 0x32 2693#define ABTS 0x81 2694#define BA_ACC 0x84 2695 2696#define LS_RJT 0x01 2697#define LS_ACC 0x02 2698#define PLOGI 0x03 2699#define LOGO 0x05 2700#define SRR 0x14 2701#define PRLI 0x20 2702#define PRLO 0x21 2703#define ADISC 0x52 2704#define RSCN 0x61 2705 2706static void 2707mpt_fc_els_send_response(struct mpt_softc *mpt, request_t *req, 2708 PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY rp, U8 length) 2709{ 2710 uint32_t fl; 2711 MSG_LINK_SERVICE_RSP_REQUEST tmp; 2712 PTR_MSG_LINK_SERVICE_RSP_REQUEST rsp; 2713 2714 /* 2715 * We are going to reuse the ELS request to send this response back. 2716 */ 2717 rsp = &tmp; 2718 memset(rsp, 0, sizeof(*rsp)); 2719 2720#ifdef USE_IMMEDIATE_LINK_DATA 2721 /* 2722 * Apparently the IMMEDIATE stuff doesn't seem to work. 2723 */ 2724 rsp->RspFlags = LINK_SERVICE_RSP_FLAGS_IMMEDIATE; 2725#endif 2726 rsp->RspLength = length; 2727 rsp->Function = MPI_FUNCTION_FC_LINK_SRVC_RSP; 2728 rsp->MsgContext = htole32(req->index | fc_els_handler_id); 2729 2730 /* 2731 * Copy over information from the original reply frame to 2732 * it's correct place in the response. 2733 */ 2734 memcpy((U8 *)rsp + 0x0c, (U8 *)rp + 0x1c, 24); 2735 2736 /* 2737 * And now copy back the temporary area to the original frame. 2738 */ 2739 memcpy(req->req_vbuf, rsp, sizeof (MSG_LINK_SERVICE_RSP_REQUEST)); 2740 rsp = req->req_vbuf; 2741 2742#ifdef USE_IMMEDIATE_LINK_DATA 2743 memcpy((U8 *)&rsp->SGL, &((U8 *)req->req_vbuf)[MPT_RQSL(mpt)], length); 2744#else 2745{ 2746 PTR_SGE_SIMPLE32 se = (PTR_SGE_SIMPLE32) &rsp->SGL; 2747 bus_addr_t paddr = req->req_pbuf; 2748 paddr += MPT_RQSL(mpt); 2749 2750 fl = 2751 MPI_SGE_FLAGS_HOST_TO_IOC | 2752 MPI_SGE_FLAGS_SIMPLE_ELEMENT | 2753 MPI_SGE_FLAGS_LAST_ELEMENT | 2754 MPI_SGE_FLAGS_END_OF_LIST | 2755 MPI_SGE_FLAGS_END_OF_BUFFER; 2756 fl <<= MPI_SGE_FLAGS_SHIFT; 2757 fl |= (length); 2758 se->FlagsLength = htole32(fl); 2759 se->Address = htole32((uint32_t) paddr); 2760} 2761#endif 2762 2763 /* 2764 * Send it on... 2765 */ 2766 mpt_send_cmd(mpt, req); 2767} 2768 2769static int 2770mpt_fc_els_reply_handler(struct mpt_softc *mpt, request_t *req, 2771 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 2772{ 2773 PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY rp = 2774 (PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY) reply_frame; 2775 U8 rctl; 2776 U8 type; 2777 U8 cmd; 2778 U16 status = le16toh(reply_frame->IOCStatus); 2779 U32 *elsbuf; 2780 int ioindex; 2781 int do_refresh = TRUE; 2782 2783#ifdef INVARIANTS 2784 KASSERT(mpt_req_on_free_list(mpt, req) == 0, 2785 ("fc_els_reply_handler: req %p:%u for function %x on freelist!", 2786 req, req->serno, rp->Function)); 2787 if (rp->Function != MPI_FUNCTION_FC_PRIMITIVE_SEND) { 2788 mpt_req_spcl(mpt, req, "fc_els_reply_handler", __LINE__); 2789 } else { 2790 mpt_req_not_spcl(mpt, req, "fc_els_reply_handler", __LINE__); 2791 } 2792#endif 2793 mpt_lprt(mpt, MPT_PRT_DEBUG, 2794 "FC_ELS Complete: req %p:%u, reply %p function %x\n", 2795 req, req->serno, reply_frame, reply_frame->Function); 2796 2797 if (status != MPI_IOCSTATUS_SUCCESS) { 2798 mpt_prt(mpt, "ELS REPLY STATUS 0x%x for Function %x\n", 2799 status, reply_frame->Function); 2800 if (status == MPI_IOCSTATUS_INVALID_STATE) { 2801 /* 2802 * XXX: to get around shutdown issue 2803 */ 2804 mpt->disabled = 1; 2805 return (TRUE); 2806 } 2807 return (TRUE); 2808 } 2809 2810 /* 2811 * If the function of a link service response, we recycle the 2812 * response to be a refresh for a new link service request. 2813 * 2814 * The request pointer is bogus in this case and we have to fetch 2815 * it based upon the TransactionContext. 2816 */ 2817 if (rp->Function == MPI_FUNCTION_FC_LINK_SRVC_RSP) { 2818 /* Freddie Uncle Charlie Katie */ 2819 /* We don't get the IOINDEX as part of the Link Svc Rsp */ 2820 for (ioindex = 0; ioindex < mpt->els_cmds_allocated; ioindex++) 2821 if (mpt->els_cmd_ptrs[ioindex] == req) { 2822 break; 2823 } 2824 2825 KASSERT(ioindex < mpt->els_cmds_allocated, 2826 ("can't find my mommie!")); 2827 2828 /* remove from active list as we're going to re-post it */ 2829 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 2830 req->state &= ~REQ_STATE_QUEUED; 2831 req->state |= REQ_STATE_DONE; 2832 mpt_fc_post_els(mpt, req, ioindex); 2833 return (TRUE); 2834 } 2835 2836 if (rp->Function == MPI_FUNCTION_FC_PRIMITIVE_SEND) { 2837 /* remove from active list as we're done */ 2838 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 2839 req->state &= ~REQ_STATE_QUEUED; 2840 req->state |= REQ_STATE_DONE; 2841 if (req->state & REQ_STATE_TIMEDOUT) { 2842 mpt_lprt(mpt, MPT_PRT_DEBUG, 2843 "Sync Primitive Send Completed After Timeout\n"); 2844 mpt_free_request(mpt, req); 2845 } else if ((req->state & REQ_STATE_NEED_WAKEUP) == 0) { 2846 mpt_lprt(mpt, MPT_PRT_DEBUG, 2847 "Async Primitive Send Complete\n"); 2848 mpt_free_request(mpt, req); 2849 } else { 2850 mpt_lprt(mpt, MPT_PRT_DEBUG, 2851 "Sync Primitive Send Complete- Waking Waiter\n"); 2852 wakeup(req); 2853 } 2854 return (TRUE); 2855 } 2856 2857 if (rp->Function != MPI_FUNCTION_FC_LINK_SRVC_BUF_POST) { 2858 mpt_prt(mpt, "unexpected ELS_REPLY: Function 0x%x Flags %x " 2859 "Length %d Message Flags %x\n", rp->Function, rp->Flags, 2860 rp->MsgLength, rp->MsgFlags); 2861 return (TRUE); 2862 } 2863 2864 if (rp->MsgLength <= 5) { 2865 /* 2866 * This is just a ack of an original ELS buffer post 2867 */ 2868 mpt_lprt(mpt, MPT_PRT_DEBUG, 2869 "RECV'd ACK of FC_ELS buf post %p:%u\n", req, req->serno); 2870 return (TRUE); 2871 } 2872 2873 2874 rctl = (le32toh(rp->Rctl_Did) & MPI_FC_RCTL_MASK) >> MPI_FC_RCTL_SHIFT; 2875 type = (le32toh(rp->Type_Fctl) & MPI_FC_TYPE_MASK) >> MPI_FC_TYPE_SHIFT; 2876 2877 elsbuf = &((U32 *)req->req_vbuf)[MPT_RQSL(mpt)/sizeof (U32)]; 2878 cmd = be32toh(elsbuf[0]) >> 24; 2879 2880 if (rp->Flags & MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED) { 2881 mpt_lprt(mpt, MPT_PRT_ALWAYS, "ELS_REPLY: response unneeded\n"); 2882 return (TRUE); 2883 } 2884 2885 ioindex = le32toh(rp->TransactionContext); 2886 req = mpt->els_cmd_ptrs[ioindex]; 2887 2888 if (rctl == ELS && type == 1) { 2889 switch (cmd) { 2890 case PRLI: 2891 /* 2892 * Send back a PRLI ACC 2893 */ 2894 mpt_prt(mpt, "PRLI from 0x%08x%08x\n", 2895 le32toh(rp->Wwn.PortNameHigh), 2896 le32toh(rp->Wwn.PortNameLow)); 2897 elsbuf[0] = htobe32(0x02100014); 2898 elsbuf[1] |= htobe32(0x00000100); 2899 elsbuf[4] = htobe32(0x00000002); 2900 if (mpt->role & MPT_ROLE_TARGET) 2901 elsbuf[4] |= htobe32(0x00000010); 2902 if (mpt->role & MPT_ROLE_INITIATOR) 2903 elsbuf[4] |= htobe32(0x00000020); 2904 /* remove from active list as we're done */ 2905 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 2906 req->state &= ~REQ_STATE_QUEUED; 2907 req->state |= REQ_STATE_DONE; 2908 mpt_fc_els_send_response(mpt, req, rp, 20); 2909 do_refresh = FALSE; 2910 break; 2911 case PRLO: 2912 memset(elsbuf, 0, 5 * (sizeof (U32))); 2913 elsbuf[0] = htobe32(0x02100014); 2914 elsbuf[1] = htobe32(0x08000100); 2915 mpt_prt(mpt, "PRLO from 0x%08x%08x\n", 2916 le32toh(rp->Wwn.PortNameHigh), 2917 le32toh(rp->Wwn.PortNameLow)); 2918 /* remove from active list as we're done */ 2919 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 2920 req->state &= ~REQ_STATE_QUEUED; 2921 req->state |= REQ_STATE_DONE; 2922 mpt_fc_els_send_response(mpt, req, rp, 20); 2923 do_refresh = FALSE; 2924 break; 2925 default: 2926 mpt_prt(mpt, "ELS TYPE 1 COMMAND: %x\n", cmd); 2927 break; 2928 } 2929 } else if (rctl == ABTS && type == 0) { 2930 uint16_t rx_id = le16toh(rp->Rxid); 2931 uint16_t ox_id = le16toh(rp->Oxid); 2932 request_t *tgt_req = NULL; 2933 2934 mpt_prt(mpt, 2935 "ELS: ABTS OX_ID 0x%x RX_ID 0x%x from 0x%08x%08x\n", 2936 ox_id, rx_id, le32toh(rp->Wwn.PortNameHigh), 2937 le32toh(rp->Wwn.PortNameLow)); 2938 if (rx_id >= mpt->mpt_max_tgtcmds) { 2939 mpt_prt(mpt, "Bad RX_ID 0x%x\n", rx_id); 2940 } else if (mpt->tgt_cmd_ptrs == NULL) { 2941 mpt_prt(mpt, "No TGT CMD PTRS\n"); 2942 } else { 2943 tgt_req = mpt->tgt_cmd_ptrs[rx_id]; 2944 } 2945 if (tgt_req) { 2946 mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, tgt_req); 2947 union ccb *ccb; 2948 uint32_t ct_id; 2949 2950 /* 2951 * Check to make sure we have the correct command 2952 * The reply descriptor in the target state should 2953 * should contain an IoIndex that should match the 2954 * RX_ID. 2955 * 2956 * It'd be nice to have OX_ID to crosscheck with 2957 * as well. 2958 */ 2959 ct_id = GET_IO_INDEX(tgt->reply_desc); 2960 2961 if (ct_id != rx_id) { 2962 mpt_lprt(mpt, MPT_PRT_ERROR, "ABORT Mismatch: " 2963 "RX_ID received=0x%x; RX_ID in cmd=0x%x\n", 2964 rx_id, ct_id); 2965 goto skip; 2966 } 2967 2968 ccb = tgt->ccb; 2969 if (ccb) { 2970 mpt_prt(mpt, 2971 "CCB (%p): lun %u flags %x status %x\n", 2972 ccb, ccb->ccb_h.target_lun, 2973 ccb->ccb_h.flags, ccb->ccb_h.status); 2974 } 2975 mpt_prt(mpt, "target state 0x%x resid %u xfrd %u rpwrd " 2976 "%x nxfers %x\n", tgt->state, 2977 tgt->resid, tgt->bytes_xfered, tgt->reply_desc, 2978 tgt->nxfers); 2979 skip: 2980 if (mpt_abort_target_cmd(mpt, tgt_req)) { 2981 mpt_prt(mpt, "unable to start TargetAbort\n"); 2982 } 2983 } else { 2984 mpt_prt(mpt, "no back pointer for RX_ID 0x%x\n", rx_id); 2985 } 2986 memset(elsbuf, 0, 5 * (sizeof (U32))); 2987 elsbuf[0] = htobe32(0); 2988 elsbuf[1] = htobe32((ox_id << 16) | rx_id); 2989 elsbuf[2] = htobe32(0x000ffff); 2990 /* 2991 * Dork with the reply frame so that the response to it 2992 * will be correct. 2993 */ 2994 rp->Rctl_Did += ((BA_ACC - ABTS) << MPI_FC_RCTL_SHIFT); 2995 /* remove from active list as we're done */ 2996 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 2997 req->state &= ~REQ_STATE_QUEUED; 2998 req->state |= REQ_STATE_DONE; 2999 mpt_fc_els_send_response(mpt, req, rp, 12); 3000 do_refresh = FALSE; 3001 } else { 3002 mpt_prt(mpt, "ELS: RCTL %x TYPE %x CMD %x\n", rctl, type, cmd); 3003 } 3004 if (do_refresh == TRUE) { 3005 /* remove from active list as we're done */ 3006 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 3007 req->state &= ~REQ_STATE_QUEUED; 3008 req->state |= REQ_STATE_DONE; 3009 mpt_fc_post_els(mpt, req, ioindex); 3010 } 3011 return (TRUE); 3012} 3013 3014/* 3015 * Clean up all SCSI Initiator personality state in response 3016 * to a controller reset. 3017 */ 3018static void 3019mpt_cam_ioc_reset(struct mpt_softc *mpt, int type) 3020{ 3021 3022 /* 3023 * The pending list is already run down by 3024 * the generic handler. Perform the same 3025 * operation on the timed out request list. 3026 */ 3027 mpt_complete_request_chain(mpt, &mpt->request_timeout_list, 3028 MPI_IOCSTATUS_INVALID_STATE); 3029 3030 /* 3031 * XXX: We need to repost ELS and Target Command Buffers? 3032 */ 3033 3034 /* 3035 * Inform the XPT that a bus reset has occurred. 3036 */ 3037 xpt_async(AC_BUS_RESET, mpt->path, NULL); 3038} 3039 3040/* 3041 * Parse additional completion information in the reply 3042 * frame for SCSI I/O requests. 3043 */ 3044static int 3045mpt_scsi_reply_frame_handler(struct mpt_softc *mpt, request_t *req, 3046 MSG_DEFAULT_REPLY *reply_frame) 3047{ 3048 union ccb *ccb; 3049 MSG_SCSI_IO_REPLY *scsi_io_reply; 3050 u_int ioc_status; 3051 u_int sstate; 3052 3053 MPT_DUMP_REPLY_FRAME(mpt, reply_frame); 3054 KASSERT(reply_frame->Function == MPI_FUNCTION_SCSI_IO_REQUEST 3055 || reply_frame->Function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH, 3056 ("MPT SCSI I/O Handler called with incorrect reply type")); 3057 KASSERT((reply_frame->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) == 0, 3058 ("MPT SCSI I/O Handler called with continuation reply")); 3059 3060 scsi_io_reply = (MSG_SCSI_IO_REPLY *)reply_frame; 3061 ioc_status = le16toh(scsi_io_reply->IOCStatus); 3062 ioc_status &= MPI_IOCSTATUS_MASK; 3063 sstate = scsi_io_reply->SCSIState; 3064 3065 ccb = req->ccb; 3066 ccb->csio.resid = 3067 ccb->csio.dxfer_len - le32toh(scsi_io_reply->TransferCount); 3068 3069 if ((sstate & MPI_SCSI_STATE_AUTOSENSE_VALID) != 0 3070 && (ccb->ccb_h.flags & (CAM_SENSE_PHYS | CAM_SENSE_PTR)) == 0) { 3071 uint32_t sense_returned; 3072 3073 ccb->ccb_h.status |= CAM_AUTOSNS_VALID; 3074 3075 sense_returned = le32toh(scsi_io_reply->SenseCount); 3076 if (sense_returned < ccb->csio.sense_len) 3077 ccb->csio.sense_resid = ccb->csio.sense_len - 3078 sense_returned; 3079 else 3080 ccb->csio.sense_resid = 0; 3081 3082 bzero(&ccb->csio.sense_data, sizeof(ccb->csio.sense_data)); 3083 bcopy(req->sense_vbuf, &ccb->csio.sense_data, 3084 min(ccb->csio.sense_len, sense_returned)); 3085 } 3086 3087 if ((sstate & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) != 0) { 3088 /* 3089 * Tag messages rejected, but non-tagged retry 3090 * was successful. 3091XXXX 3092 mpt_set_tags(mpt, devinfo, MPT_QUEUE_NONE); 3093 */ 3094 } 3095 3096 switch(ioc_status) { 3097 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: 3098 /* 3099 * XXX 3100 * Linux driver indicates that a zero 3101 * transfer length with this error code 3102 * indicates a CRC error. 3103 * 3104 * No need to swap the bytes for checking 3105 * against zero. 3106 */ 3107 if (scsi_io_reply->TransferCount == 0) { 3108 mpt_set_ccb_status(ccb, CAM_UNCOR_PARITY); 3109 break; 3110 } 3111 /* FALLTHROUGH */ 3112 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: 3113 case MPI_IOCSTATUS_SUCCESS: 3114 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: 3115 if ((sstate & MPI_SCSI_STATE_NO_SCSI_STATUS) != 0) { 3116 /* 3117 * Status was never returned for this transaction. 3118 */ 3119 mpt_set_ccb_status(ccb, CAM_UNEXP_BUSFREE); 3120 } else if (scsi_io_reply->SCSIStatus != SCSI_STATUS_OK) { 3121 ccb->csio.scsi_status = scsi_io_reply->SCSIStatus; 3122 mpt_set_ccb_status(ccb, CAM_SCSI_STATUS_ERROR); 3123 if ((sstate & MPI_SCSI_STATE_AUTOSENSE_FAILED) != 0) 3124 mpt_set_ccb_status(ccb, CAM_AUTOSENSE_FAIL); 3125 } else if ((sstate & MPI_SCSI_STATE_RESPONSE_INFO_VALID) != 0) { 3126 3127 /* XXX Handle SPI-Packet and FCP-2 response info. */ 3128 mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); 3129 } else 3130 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3131 break; 3132 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: 3133 mpt_set_ccb_status(ccb, CAM_DATA_RUN_ERR); 3134 break; 3135 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: 3136 mpt_set_ccb_status(ccb, CAM_UNCOR_PARITY); 3137 break; 3138 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: 3139 /* 3140 * Since selection timeouts and "device really not 3141 * there" are grouped into this error code, report 3142 * selection timeout. Selection timeouts are 3143 * typically retried before giving up on the device 3144 * whereas "device not there" errors are considered 3145 * unretryable. 3146 */ 3147 mpt_set_ccb_status(ccb, CAM_SEL_TIMEOUT); 3148 break; 3149 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: 3150 mpt_set_ccb_status(ccb, CAM_SEQUENCE_FAIL); 3151 break; 3152 case MPI_IOCSTATUS_SCSI_INVALID_BUS: 3153 mpt_set_ccb_status(ccb, CAM_PATH_INVALID); 3154 break; 3155 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: 3156 mpt_set_ccb_status(ccb, CAM_TID_INVALID); 3157 break; 3158 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: 3159 ccb->ccb_h.status = CAM_UA_TERMIO; 3160 break; 3161 case MPI_IOCSTATUS_INVALID_STATE: 3162 /* 3163 * The IOC has been reset. Emulate a bus reset. 3164 */ 3165 /* FALLTHROUGH */ 3166 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: 3167 ccb->ccb_h.status = CAM_SCSI_BUS_RESET; 3168 break; 3169 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: 3170 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: 3171 /* 3172 * Don't clobber any timeout status that has 3173 * already been set for this transaction. We 3174 * want the SCSI layer to be able to differentiate 3175 * between the command we aborted due to timeout 3176 * and any innocent bystanders. 3177 */ 3178 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) 3179 break; 3180 mpt_set_ccb_status(ccb, CAM_REQ_TERMIO); 3181 break; 3182 3183 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: 3184 mpt_set_ccb_status(ccb, CAM_RESRC_UNAVAIL); 3185 break; 3186 case MPI_IOCSTATUS_BUSY: 3187 mpt_set_ccb_status(ccb, CAM_BUSY); 3188 break; 3189 case MPI_IOCSTATUS_INVALID_FUNCTION: 3190 case MPI_IOCSTATUS_INVALID_SGL: 3191 case MPI_IOCSTATUS_INTERNAL_ERROR: 3192 case MPI_IOCSTATUS_INVALID_FIELD: 3193 default: 3194 /* XXX 3195 * Some of the above may need to kick 3196 * of a recovery action!!!! 3197 */ 3198 ccb->ccb_h.status = CAM_UNREC_HBA_ERROR; 3199 break; 3200 } 3201 3202 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { 3203 mpt_freeze_ccb(ccb); 3204 } 3205 3206 return (TRUE); 3207} 3208 3209static void 3210mpt_action(struct cam_sim *sim, union ccb *ccb) 3211{ 3212 struct mpt_softc *mpt; 3213 struct ccb_trans_settings *cts; 3214 target_id_t tgt; 3215 lun_id_t lun; 3216 int raid_passthru; 3217 3218 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("mpt_action\n")); 3219 3220 mpt = (struct mpt_softc *)cam_sim_softc(sim); 3221 raid_passthru = (sim == mpt->phydisk_sim); 3222 MPT_LOCK_ASSERT(mpt); 3223 3224 tgt = ccb->ccb_h.target_id; 3225 lun = ccb->ccb_h.target_lun; 3226 if (raid_passthru && 3227 ccb->ccb_h.func_code != XPT_PATH_INQ && 3228 ccb->ccb_h.func_code != XPT_RESET_BUS && 3229 ccb->ccb_h.func_code != XPT_RESET_DEV) { 3230 if (mpt_map_physdisk(mpt, ccb, &tgt) != 0) { 3231 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 3232 mpt_set_ccb_status(ccb, CAM_DEV_NOT_THERE); 3233 xpt_done(ccb); 3234 return; 3235 } 3236 } 3237 ccb->ccb_h.ccb_mpt_ptr = mpt; 3238 3239 switch (ccb->ccb_h.func_code) { 3240 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 3241 /* 3242 * Do a couple of preliminary checks... 3243 */ 3244 if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) { 3245 if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) { 3246 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 3247 mpt_set_ccb_status(ccb, CAM_REQ_INVALID); 3248 break; 3249 } 3250 } 3251 /* Max supported CDB length is 16 bytes */ 3252 /* XXX Unless we implement the new 32byte message type */ 3253 if (ccb->csio.cdb_len > 3254 sizeof (((PTR_MSG_SCSI_IO_REQUEST)0)->CDB)) { 3255 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 3256 mpt_set_ccb_status(ccb, CAM_REQ_INVALID); 3257 break; 3258 } 3259#ifdef MPT_TEST_MULTIPATH 3260 if (mpt->failure_id == ccb->ccb_h.target_id) { 3261 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 3262 mpt_set_ccb_status(ccb, CAM_SEL_TIMEOUT); 3263 break; 3264 } 3265#endif 3266 ccb->csio.scsi_status = SCSI_STATUS_OK; 3267 mpt_start(sim, ccb); 3268 return; 3269 3270 case XPT_RESET_BUS: 3271 if (raid_passthru) { 3272 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 3273 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3274 break; 3275 } 3276 case XPT_RESET_DEV: 3277 if (ccb->ccb_h.func_code == XPT_RESET_BUS) { 3278 if (bootverbose) { 3279 xpt_print(ccb->ccb_h.path, "reset bus\n"); 3280 } 3281 } else { 3282 xpt_print(ccb->ccb_h.path, "reset device\n"); 3283 } 3284 (void) mpt_bus_reset(mpt, tgt, lun, FALSE); 3285 3286 /* 3287 * mpt_bus_reset is always successful in that it 3288 * will fall back to a hard reset should a bus 3289 * reset attempt fail. 3290 */ 3291 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 3292 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3293 break; 3294 3295 case XPT_ABORT: 3296 { 3297 union ccb *accb = ccb->cab.abort_ccb; 3298 switch (accb->ccb_h.func_code) { 3299 case XPT_ACCEPT_TARGET_IO: 3300 case XPT_IMMEDIATE_NOTIFY: 3301 ccb->ccb_h.status = mpt_abort_target_ccb(mpt, ccb); 3302 break; 3303 case XPT_CONT_TARGET_IO: 3304 mpt_prt(mpt, "cannot abort active CTIOs yet\n"); 3305 ccb->ccb_h.status = CAM_UA_ABORT; 3306 break; 3307 case XPT_SCSI_IO: 3308 ccb->ccb_h.status = CAM_UA_ABORT; 3309 break; 3310 default: 3311 ccb->ccb_h.status = CAM_REQ_INVALID; 3312 break; 3313 } 3314 break; 3315 } 3316 3317#define IS_CURRENT_SETTINGS(c) ((c)->type == CTS_TYPE_CURRENT_SETTINGS) 3318 3319#define DP_DISC_ENABLE 0x1 3320#define DP_DISC_DISABL 0x2 3321#define DP_DISC (DP_DISC_ENABLE|DP_DISC_DISABL) 3322 3323#define DP_TQING_ENABLE 0x4 3324#define DP_TQING_DISABL 0x8 3325#define DP_TQING (DP_TQING_ENABLE|DP_TQING_DISABL) 3326 3327#define DP_WIDE 0x10 3328#define DP_NARROW 0x20 3329#define DP_WIDTH (DP_WIDE|DP_NARROW) 3330 3331#define DP_SYNC 0x40 3332 3333 case XPT_SET_TRAN_SETTINGS: /* Nexus Settings */ 3334 { 3335 struct ccb_trans_settings_scsi *scsi; 3336 struct ccb_trans_settings_spi *spi; 3337 uint8_t dval; 3338 u_int period; 3339 u_int offset; 3340 int i, j; 3341 3342 cts = &ccb->cts; 3343 3344 if (mpt->is_fc || mpt->is_sas) { 3345 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3346 break; 3347 } 3348 3349 scsi = &cts->proto_specific.scsi; 3350 spi = &cts->xport_specific.spi; 3351 3352 /* 3353 * We can be called just to valid transport and proto versions 3354 */ 3355 if (scsi->valid == 0 && spi->valid == 0) { 3356 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3357 break; 3358 } 3359 3360 /* 3361 * Skip attempting settings on RAID volume disks. 3362 * Other devices on the bus get the normal treatment. 3363 */ 3364 if (mpt->phydisk_sim && raid_passthru == 0 && 3365 mpt_is_raid_volume(mpt, tgt) != 0) { 3366 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 3367 "no transfer settings for RAID vols\n"); 3368 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3369 break; 3370 } 3371 3372 i = mpt->mpt_port_page2.PortSettings & 3373 MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS; 3374 j = mpt->mpt_port_page2.PortFlags & 3375 MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; 3376 if (i == MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS && 3377 j == MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV) { 3378 mpt_lprt(mpt, MPT_PRT_ALWAYS, 3379 "honoring BIOS transfer negotiations\n"); 3380 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3381 break; 3382 } 3383 3384 dval = 0; 3385 period = 0; 3386 offset = 0; 3387 3388 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) { 3389 dval |= ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) ? 3390 DP_DISC_ENABLE : DP_DISC_DISABL; 3391 } 3392 3393 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) { 3394 dval |= ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) ? 3395 DP_TQING_ENABLE : DP_TQING_DISABL; 3396 } 3397 3398 if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) { 3399 dval |= (spi->bus_width == MSG_EXT_WDTR_BUS_16_BIT) ? 3400 DP_WIDE : DP_NARROW; 3401 } 3402 3403 if (spi->valid & CTS_SPI_VALID_SYNC_OFFSET) { 3404 dval |= DP_SYNC; 3405 offset = spi->sync_offset; 3406 } else { 3407 PTR_CONFIG_PAGE_SCSI_DEVICE_1 ptr = 3408 &mpt->mpt_dev_page1[tgt]; 3409 offset = ptr->RequestedParameters; 3410 offset &= MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK; 3411 offset >>= MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET; 3412 } 3413 if (spi->valid & CTS_SPI_VALID_SYNC_RATE) { 3414 dval |= DP_SYNC; 3415 period = spi->sync_period; 3416 } else { 3417 PTR_CONFIG_PAGE_SCSI_DEVICE_1 ptr = 3418 &mpt->mpt_dev_page1[tgt]; 3419 period = ptr->RequestedParameters; 3420 period &= MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK; 3421 period >>= MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD; 3422 } 3423 3424 if (dval & DP_DISC_ENABLE) { 3425 mpt->mpt_disc_enable |= (1 << tgt); 3426 } else if (dval & DP_DISC_DISABL) { 3427 mpt->mpt_disc_enable &= ~(1 << tgt); 3428 } 3429 if (dval & DP_TQING_ENABLE) { 3430 mpt->mpt_tag_enable |= (1 << tgt); 3431 } else if (dval & DP_TQING_DISABL) { 3432 mpt->mpt_tag_enable &= ~(1 << tgt); 3433 } 3434 if (dval & DP_WIDTH) { 3435 mpt_setwidth(mpt, tgt, 1); 3436 } 3437 if (dval & DP_SYNC) { 3438 mpt_setsync(mpt, tgt, period, offset); 3439 } 3440 if (dval == 0) { 3441 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3442 break; 3443 } 3444 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 3445 "set [%d]: 0x%x period 0x%x offset %d\n", 3446 tgt, dval, period, offset); 3447 if (mpt_update_spi_config(mpt, tgt)) { 3448 mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); 3449 } else { 3450 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3451 } 3452 break; 3453 } 3454 case XPT_GET_TRAN_SETTINGS: 3455 { 3456 struct ccb_trans_settings_scsi *scsi; 3457 cts = &ccb->cts; 3458 cts->protocol = PROTO_SCSI; 3459 if (mpt->is_fc) { 3460 struct ccb_trans_settings_fc *fc = 3461 &cts->xport_specific.fc; 3462 cts->protocol_version = SCSI_REV_SPC; 3463 cts->transport = XPORT_FC; 3464 cts->transport_version = 0; 3465 fc->valid = CTS_FC_VALID_SPEED; 3466 fc->bitrate = 100000; 3467 } else if (mpt->is_sas) { 3468 struct ccb_trans_settings_sas *sas = 3469 &cts->xport_specific.sas; 3470 cts->protocol_version = SCSI_REV_SPC2; 3471 cts->transport = XPORT_SAS; 3472 cts->transport_version = 0; 3473 sas->valid = CTS_SAS_VALID_SPEED; 3474 sas->bitrate = 300000; 3475 } else { 3476 cts->protocol_version = SCSI_REV_2; 3477 cts->transport = XPORT_SPI; 3478 cts->transport_version = 2; 3479 if (mpt_get_spi_settings(mpt, cts) != 0) { 3480 mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); 3481 break; 3482 } 3483 } 3484 scsi = &cts->proto_specific.scsi; 3485 scsi->valid = CTS_SCSI_VALID_TQ; 3486 scsi->flags = CTS_SCSI_FLAGS_TAG_ENB; 3487 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3488 break; 3489 } 3490 case XPT_CALC_GEOMETRY: 3491 { 3492 struct ccb_calc_geometry *ccg; 3493 3494 ccg = &ccb->ccg; 3495 if (ccg->block_size == 0) { 3496 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 3497 mpt_set_ccb_status(ccb, CAM_REQ_INVALID); 3498 break; 3499 } 3500 cam_calc_geometry(ccg, /* extended */ 1); 3501 KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d", __LINE__)); 3502 break; 3503 } 3504 case XPT_PATH_INQ: /* Path routing inquiry */ 3505 { 3506 struct ccb_pathinq *cpi = &ccb->cpi; 3507 3508 cpi->version_num = 1; 3509 cpi->target_sprt = 0; 3510 cpi->hba_eng_cnt = 0; 3511 cpi->max_target = mpt->port_facts[0].MaxDevices - 1; 3512 cpi->maxio = (mpt->max_cam_seg_cnt - 1) * PAGE_SIZE; 3513 /* 3514 * FC cards report MAX_DEVICES of 512, but 3515 * the MSG_SCSI_IO_REQUEST target id field 3516 * is only 8 bits. Until we fix the driver 3517 * to support 'channels' for bus overflow, 3518 * just limit it. 3519 */ 3520 if (cpi->max_target > 255) { 3521 cpi->max_target = 255; 3522 } 3523 3524 /* 3525 * VMware ESX reports > 16 devices and then dies when we probe. 3526 */ 3527 if (mpt->is_spi && cpi->max_target > 15) { 3528 cpi->max_target = 15; 3529 } 3530 if (mpt->is_spi) 3531 cpi->max_lun = 7; 3532 else 3533 cpi->max_lun = MPT_MAX_LUNS; 3534 cpi->initiator_id = mpt->mpt_ini_id; 3535 cpi->bus_id = cam_sim_bus(sim); 3536 3537 /* 3538 * The base speed is the speed of the underlying connection. 3539 */ 3540 cpi->protocol = PROTO_SCSI; 3541 if (mpt->is_fc) { 3542 cpi->hba_misc = PIM_NOBUSRESET | PIM_UNMAPPED; 3543 cpi->base_transfer_speed = 100000; 3544 cpi->hba_inquiry = PI_TAG_ABLE; 3545 cpi->transport = XPORT_FC; 3546 cpi->transport_version = 0; 3547 cpi->protocol_version = SCSI_REV_SPC; 3548 } else if (mpt->is_sas) { 3549 cpi->hba_misc = PIM_NOBUSRESET | PIM_UNMAPPED; 3550 cpi->base_transfer_speed = 300000; 3551 cpi->hba_inquiry = PI_TAG_ABLE; 3552 cpi->transport = XPORT_SAS; 3553 cpi->transport_version = 0; 3554 cpi->protocol_version = SCSI_REV_SPC2; 3555 } else { 3556 cpi->hba_misc = PIM_SEQSCAN | PIM_UNMAPPED; 3557 cpi->base_transfer_speed = 3300; 3558 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16; 3559 cpi->transport = XPORT_SPI; 3560 cpi->transport_version = 2; 3561 cpi->protocol_version = SCSI_REV_2; 3562 } 3563 3564 /* 3565 * We give our fake RAID passhtru bus a width that is MaxVolumes 3566 * wide and restrict it to one lun. 3567 */ 3568 if (raid_passthru) { 3569 cpi->max_target = mpt->ioc_page2->MaxPhysDisks - 1; 3570 cpi->initiator_id = cpi->max_target + 1; 3571 cpi->max_lun = 0; 3572 } 3573 3574 if ((mpt->role & MPT_ROLE_INITIATOR) == 0) { 3575 cpi->hba_misc |= PIM_NOINITIATOR; 3576 } 3577 if (mpt->is_fc && (mpt->role & MPT_ROLE_TARGET)) { 3578 cpi->target_sprt = 3579 PIT_PROCESSOR | PIT_DISCONNECT | PIT_TERM_IO; 3580 } else { 3581 cpi->target_sprt = 0; 3582 } 3583 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 3584 strncpy(cpi->hba_vid, "LSI", HBA_IDLEN); 3585 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 3586 cpi->unit_number = cam_sim_unit(sim); 3587 cpi->ccb_h.status = CAM_REQ_CMP; 3588 break; 3589 } 3590 case XPT_EN_LUN: /* Enable LUN as a target */ 3591 { 3592 int result; 3593 3594 if (ccb->cel.enable) 3595 result = mpt_enable_lun(mpt, 3596 ccb->ccb_h.target_id, ccb->ccb_h.target_lun); 3597 else 3598 result = mpt_disable_lun(mpt, 3599 ccb->ccb_h.target_id, ccb->ccb_h.target_lun); 3600 if (result == 0) { 3601 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 3602 } else { 3603 mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); 3604 } 3605 break; 3606 } 3607 case XPT_NOTIFY_ACKNOWLEDGE: /* recycle notify ack */ 3608 case XPT_IMMEDIATE_NOTIFY: /* Add Immediate Notify Resource */ 3609 case XPT_ACCEPT_TARGET_IO: /* Add Accept Target IO Resource */ 3610 { 3611 tgt_resource_t *trtp; 3612 lun_id_t lun = ccb->ccb_h.target_lun; 3613 ccb->ccb_h.sim_priv.entries[0].field = 0; 3614 ccb->ccb_h.sim_priv.entries[1].ptr = mpt; 3615 ccb->ccb_h.flags = 0; 3616 3617 if (lun == CAM_LUN_WILDCARD) { 3618 if (ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 3619 mpt_set_ccb_status(ccb, CAM_REQ_INVALID); 3620 break; 3621 } 3622 trtp = &mpt->trt_wildcard; 3623 } else if (lun >= MPT_MAX_LUNS) { 3624 mpt_set_ccb_status(ccb, CAM_REQ_INVALID); 3625 break; 3626 } else { 3627 trtp = &mpt->trt[lun]; 3628 } 3629 if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) { 3630 mpt_lprt(mpt, MPT_PRT_DEBUG1, 3631 "Put FREE ATIO %p lun %d\n", ccb, lun); 3632 STAILQ_INSERT_TAIL(&trtp->atios, &ccb->ccb_h, 3633 sim_links.stqe); 3634 } else if (ccb->ccb_h.func_code == XPT_IMMEDIATE_NOTIFY) { 3635 mpt_lprt(mpt, MPT_PRT_DEBUG1, 3636 "Put FREE INOT lun %d\n", lun); 3637 STAILQ_INSERT_TAIL(&trtp->inots, &ccb->ccb_h, 3638 sim_links.stqe); 3639 } else { 3640 mpt_lprt(mpt, MPT_PRT_ALWAYS, "Got Notify ACK\n"); 3641 } 3642 mpt_set_ccb_status(ccb, CAM_REQ_INPROG); 3643 return; 3644 } 3645 case XPT_CONT_TARGET_IO: 3646 mpt_target_start_io(mpt, ccb); 3647 return; 3648 3649 default: 3650 ccb->ccb_h.status = CAM_REQ_INVALID; 3651 break; 3652 } 3653 xpt_done(ccb); 3654} 3655 3656static int 3657mpt_get_spi_settings(struct mpt_softc *mpt, struct ccb_trans_settings *cts) 3658{ 3659 struct ccb_trans_settings_scsi *scsi = &cts->proto_specific.scsi; 3660 struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi; 3661 target_id_t tgt; 3662 uint32_t dval, pval, oval; 3663 int rv; 3664 3665 if (IS_CURRENT_SETTINGS(cts) == 0) { 3666 tgt = cts->ccb_h.target_id; 3667 } else if (xpt_path_sim(cts->ccb_h.path) == mpt->phydisk_sim) { 3668 if (mpt_map_physdisk(mpt, (union ccb *)cts, &tgt)) { 3669 return (-1); 3670 } 3671 } else { 3672 tgt = cts->ccb_h.target_id; 3673 } 3674 3675 /* 3676 * We aren't looking at Port Page 2 BIOS settings here- 3677 * sometimes these have been known to be bogus XXX. 3678 * 3679 * For user settings, we pick the max from port page 0 3680 * 3681 * For current settings we read the current settings out from 3682 * device page 0 for that target. 3683 */ 3684 if (IS_CURRENT_SETTINGS(cts)) { 3685 CONFIG_PAGE_SCSI_DEVICE_0 tmp; 3686 dval = 0; 3687 3688 tmp = mpt->mpt_dev_page0[tgt]; 3689 rv = mpt_read_cur_cfg_page(mpt, tgt, &tmp.Header, 3690 sizeof(tmp), FALSE, 5000); 3691 if (rv) { 3692 mpt_prt(mpt, "can't get tgt %d config page 0\n", tgt); 3693 return (rv); 3694 } 3695 mpt2host_config_page_scsi_device_0(&tmp); 3696 3697 mpt_lprt(mpt, MPT_PRT_DEBUG, 3698 "mpt_get_spi_settings[%d]: current NP %x Info %x\n", tgt, 3699 tmp.NegotiatedParameters, tmp.Information); 3700 dval |= (tmp.NegotiatedParameters & MPI_SCSIDEVPAGE0_NP_WIDE) ? 3701 DP_WIDE : DP_NARROW; 3702 dval |= (mpt->mpt_disc_enable & (1 << tgt)) ? 3703 DP_DISC_ENABLE : DP_DISC_DISABL; 3704 dval |= (mpt->mpt_tag_enable & (1 << tgt)) ? 3705 DP_TQING_ENABLE : DP_TQING_DISABL; 3706 oval = tmp.NegotiatedParameters; 3707 oval &= MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK; 3708 oval >>= MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET; 3709 pval = tmp.NegotiatedParameters; 3710 pval &= MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK; 3711 pval >>= MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD; 3712 mpt->mpt_dev_page0[tgt] = tmp; 3713 } else { 3714 dval = DP_WIDE|DP_DISC_ENABLE|DP_TQING_ENABLE|DP_SYNC; 3715 oval = mpt->mpt_port_page0.Capabilities; 3716 oval = MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(oval); 3717 pval = mpt->mpt_port_page0.Capabilities; 3718 pval = MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(pval); 3719 } 3720 3721 spi->valid = 0; 3722 scsi->valid = 0; 3723 spi->flags = 0; 3724 scsi->flags = 0; 3725 spi->sync_offset = oval; 3726 spi->sync_period = pval; 3727 spi->valid |= CTS_SPI_VALID_SYNC_OFFSET; 3728 spi->valid |= CTS_SPI_VALID_SYNC_RATE; 3729 spi->valid |= CTS_SPI_VALID_BUS_WIDTH; 3730 if (dval & DP_WIDE) { 3731 spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT; 3732 } else { 3733 spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT; 3734 } 3735 if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) { 3736 scsi->valid = CTS_SCSI_VALID_TQ; 3737 if (dval & DP_TQING_ENABLE) { 3738 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 3739 } 3740 spi->valid |= CTS_SPI_VALID_DISC; 3741 if (dval & DP_DISC_ENABLE) { 3742 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 3743 } 3744 } 3745 3746 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 3747 "mpt_get_spi_settings[%d]: %s flags 0x%x per 0x%x off=%d\n", tgt, 3748 IS_CURRENT_SETTINGS(cts) ? "ACTIVE" : "NVRAM ", dval, pval, oval); 3749 return (0); 3750} 3751 3752static void 3753mpt_setwidth(struct mpt_softc *mpt, int tgt, int onoff) 3754{ 3755 PTR_CONFIG_PAGE_SCSI_DEVICE_1 ptr; 3756 3757 ptr = &mpt->mpt_dev_page1[tgt]; 3758 if (onoff) { 3759 ptr->RequestedParameters |= MPI_SCSIDEVPAGE1_RP_WIDE; 3760 } else { 3761 ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_WIDE; 3762 } 3763} 3764 3765static void 3766mpt_setsync(struct mpt_softc *mpt, int tgt, int period, int offset) 3767{ 3768 PTR_CONFIG_PAGE_SCSI_DEVICE_1 ptr; 3769 3770 ptr = &mpt->mpt_dev_page1[tgt]; 3771 ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK; 3772 ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK; 3773 ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_DT; 3774 ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_QAS; 3775 ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_IU; 3776 if (period == 0) { 3777 return; 3778 } 3779 ptr->RequestedParameters |= 3780 period << MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD; 3781 ptr->RequestedParameters |= 3782 offset << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET; 3783 if (period < 0xa) { 3784 ptr->RequestedParameters |= MPI_SCSIDEVPAGE1_RP_DT; 3785 } 3786 if (period < 0x9) { 3787 ptr->RequestedParameters |= MPI_SCSIDEVPAGE1_RP_QAS; 3788 ptr->RequestedParameters |= MPI_SCSIDEVPAGE1_RP_IU; 3789 } 3790} 3791 3792static int 3793mpt_update_spi_config(struct mpt_softc *mpt, int tgt) 3794{ 3795 CONFIG_PAGE_SCSI_DEVICE_1 tmp; 3796 int rv; 3797 3798 mpt_lprt(mpt, MPT_PRT_NEGOTIATION, 3799 "mpt_update_spi_config[%d].page1: Requested Params 0x%08x\n", 3800 tgt, mpt->mpt_dev_page1[tgt].RequestedParameters); 3801 tmp = mpt->mpt_dev_page1[tgt]; 3802 host2mpt_config_page_scsi_device_1(&tmp); 3803 rv = mpt_write_cur_cfg_page(mpt, tgt, 3804 &tmp.Header, sizeof(tmp), FALSE, 5000); 3805 if (rv) { 3806 mpt_prt(mpt, "mpt_update_spi_config: write cur page failed\n"); 3807 return (-1); 3808 } 3809 return (0); 3810} 3811 3812/****************************** Timeout Recovery ******************************/ 3813static int 3814mpt_spawn_recovery_thread(struct mpt_softc *mpt) 3815{ 3816 int error; 3817 3818 error = kproc_create(mpt_recovery_thread, mpt, 3819 &mpt->recovery_thread, /*flags*/0, 3820 /*altstack*/0, "mpt_recovery%d", mpt->unit); 3821 return (error); 3822} 3823 3824static void 3825mpt_terminate_recovery_thread(struct mpt_softc *mpt) 3826{ 3827 3828 if (mpt->recovery_thread == NULL) { 3829 return; 3830 } 3831 mpt->shutdwn_recovery = 1; 3832 wakeup(mpt); 3833 /* 3834 * Sleep on a slightly different location 3835 * for this interlock just for added safety. 3836 */ 3837 mpt_sleep(mpt, &mpt->recovery_thread, PUSER, "thtrm", 0); 3838} 3839 3840static void 3841mpt_recovery_thread(void *arg) 3842{ 3843 struct mpt_softc *mpt; 3844 3845 mpt = (struct mpt_softc *)arg; 3846 MPT_LOCK(mpt); 3847 for (;;) { 3848 if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) { 3849 if (mpt->shutdwn_recovery == 0) { 3850 mpt_sleep(mpt, mpt, PUSER, "idle", 0); 3851 } 3852 } 3853 if (mpt->shutdwn_recovery != 0) { 3854 break; 3855 } 3856 mpt_recover_commands(mpt); 3857 } 3858 mpt->recovery_thread = NULL; 3859 wakeup(&mpt->recovery_thread); 3860 MPT_UNLOCK(mpt); 3861 kproc_exit(0); 3862} 3863 3864static int 3865mpt_scsi_send_tmf(struct mpt_softc *mpt, u_int type, u_int flags, 3866 u_int channel, u_int target, u_int lun, u_int abort_ctx, int sleep_ok) 3867{ 3868 MSG_SCSI_TASK_MGMT *tmf_req; 3869 int error; 3870 3871 /* 3872 * Wait for any current TMF request to complete. 3873 * We're only allowed to issue one TMF at a time. 3874 */ 3875 error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_FREE, REQ_STATE_FREE, 3876 sleep_ok, MPT_TMF_MAX_TIMEOUT); 3877 if (error != 0) { 3878 mpt_reset(mpt, TRUE); 3879 return (ETIMEDOUT); 3880 } 3881 3882 mpt_assign_serno(mpt, mpt->tmf_req); 3883 mpt->tmf_req->state = REQ_STATE_ALLOCATED|REQ_STATE_QUEUED; 3884 3885 tmf_req = (MSG_SCSI_TASK_MGMT *)mpt->tmf_req->req_vbuf; 3886 memset(tmf_req, 0, sizeof(*tmf_req)); 3887 tmf_req->TargetID = target; 3888 tmf_req->Bus = channel; 3889 tmf_req->Function = MPI_FUNCTION_SCSI_TASK_MGMT; 3890 tmf_req->TaskType = type; 3891 tmf_req->MsgFlags = flags; 3892 tmf_req->MsgContext = 3893 htole32(mpt->tmf_req->index | scsi_tmf_handler_id); 3894 if (lun > MPT_MAX_LUNS) { 3895 tmf_req->LUN[0] = 0x40 | ((lun >> 8) & 0x3f); 3896 tmf_req->LUN[1] = lun & 0xff; 3897 } else { 3898 tmf_req->LUN[1] = lun; 3899 } 3900 tmf_req->TaskMsgContext = abort_ctx; 3901 3902 mpt_lprt(mpt, MPT_PRT_DEBUG, 3903 "Issuing TMF %p:%u with MsgContext of 0x%x\n", mpt->tmf_req, 3904 mpt->tmf_req->serno, tmf_req->MsgContext); 3905 if (mpt->verbose > MPT_PRT_DEBUG) { 3906 mpt_print_request(tmf_req); 3907 } 3908 3909 KASSERT(mpt_req_on_pending_list(mpt, mpt->tmf_req) == 0, 3910 ("mpt_scsi_send_tmf: tmf_req already on pending list")); 3911 TAILQ_INSERT_HEAD(&mpt->request_pending_list, mpt->tmf_req, links); 3912 error = mpt_send_handshake_cmd(mpt, sizeof(*tmf_req), tmf_req); 3913 if (error != MPT_OK) { 3914 TAILQ_REMOVE(&mpt->request_pending_list, mpt->tmf_req, links); 3915 mpt->tmf_req->state = REQ_STATE_FREE; 3916 mpt_reset(mpt, TRUE); 3917 } 3918 return (error); 3919} 3920 3921/* 3922 * When a command times out, it is placed on the requeust_timeout_list 3923 * and we wake our recovery thread. The MPT-Fusion architecture supports 3924 * only a single TMF operation at a time, so we serially abort/bdr, etc, 3925 * the timedout transactions. The next TMF is issued either by the 3926 * completion handler of the current TMF waking our recovery thread, 3927 * or the TMF timeout handler causing a hard reset sequence. 3928 */ 3929static void 3930mpt_recover_commands(struct mpt_softc *mpt) 3931{ 3932 request_t *req; 3933 union ccb *ccb; 3934 int error; 3935 3936 if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) { 3937 /* 3938 * No work to do- leave. 3939 */ 3940 mpt_prt(mpt, "mpt_recover_commands: no requests.\n"); 3941 return; 3942 } 3943 3944 /* 3945 * Flush any commands whose completion coincides with their timeout. 3946 */ 3947 mpt_intr(mpt); 3948 3949 if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) { 3950 /* 3951 * The timedout commands have already 3952 * completed. This typically means 3953 * that either the timeout value was on 3954 * the hairy edge of what the device 3955 * requires or - more likely - interrupts 3956 * are not happening. 3957 */ 3958 mpt_prt(mpt, "Timedout requests already complete. " 3959 "Interrupts may not be functioning.\n"); 3960 mpt_enable_ints(mpt); 3961 return; 3962 } 3963 3964 /* 3965 * We have no visibility into the current state of the 3966 * controller, so attempt to abort the commands in the 3967 * order they timed-out. For initiator commands, we 3968 * depend on the reply handler pulling requests off 3969 * the timeout list. 3970 */ 3971 while ((req = TAILQ_FIRST(&mpt->request_timeout_list)) != NULL) { 3972 uint16_t status; 3973 uint8_t response; 3974 MSG_REQUEST_HEADER *hdrp = req->req_vbuf; 3975 3976 mpt_prt(mpt, "attempting to abort req %p:%u function %x\n", 3977 req, req->serno, hdrp->Function); 3978 ccb = req->ccb; 3979 if (ccb == NULL) { 3980 mpt_prt(mpt, "null ccb in timed out request. " 3981 "Resetting Controller.\n"); 3982 mpt_reset(mpt, TRUE); 3983 continue; 3984 } 3985 mpt_set_ccb_status(ccb, CAM_CMD_TIMEOUT); 3986 3987 /* 3988 * Check to see if this is not an initiator command and 3989 * deal with it differently if it is. 3990 */ 3991 switch (hdrp->Function) { 3992 case MPI_FUNCTION_SCSI_IO_REQUEST: 3993 case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: 3994 break; 3995 default: 3996 /* 3997 * XXX: FIX ME: need to abort target assists... 3998 */ 3999 mpt_prt(mpt, "just putting it back on the pend q\n"); 4000 TAILQ_REMOVE(&mpt->request_timeout_list, req, links); 4001 TAILQ_INSERT_HEAD(&mpt->request_pending_list, req, 4002 links); 4003 continue; 4004 } 4005 4006 error = mpt_scsi_send_tmf(mpt, 4007 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, 4008 0, 0, ccb->ccb_h.target_id, ccb->ccb_h.target_lun, 4009 htole32(req->index | scsi_io_handler_id), TRUE); 4010 4011 if (error != 0) { 4012 /* 4013 * mpt_scsi_send_tmf hard resets on failure, so no 4014 * need to do so here. Our queue should be emptied 4015 * by the hard reset. 4016 */ 4017 continue; 4018 } 4019 4020 error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_DONE, 4021 REQ_STATE_DONE, TRUE, 500); 4022 4023 status = le16toh(mpt->tmf_req->IOCStatus); 4024 response = mpt->tmf_req->ResponseCode; 4025 mpt->tmf_req->state = REQ_STATE_FREE; 4026 4027 if (error != 0) { 4028 /* 4029 * If we've errored out,, reset the controller. 4030 */ 4031 mpt_prt(mpt, "mpt_recover_commands: abort timed-out. " 4032 "Resetting controller\n"); 4033 mpt_reset(mpt, TRUE); 4034 continue; 4035 } 4036 4037 if ((status & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 4038 mpt_prt(mpt, "mpt_recover_commands: IOC Status 0x%x. " 4039 "Resetting controller.\n", status); 4040 mpt_reset(mpt, TRUE); 4041 continue; 4042 } 4043 4044 if (response != MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED && 4045 response != MPI_SCSITASKMGMT_RSP_TM_COMPLETE) { 4046 mpt_prt(mpt, "mpt_recover_commands: TMF Response 0x%x. " 4047 "Resetting controller.\n", response); 4048 mpt_reset(mpt, TRUE); 4049 continue; 4050 } 4051 mpt_prt(mpt, "abort of req %p:%u completed\n", req, req->serno); 4052 } 4053} 4054 4055/************************ Target Mode Support ****************************/ 4056static void 4057mpt_fc_post_els(struct mpt_softc *mpt, request_t *req, int ioindex) 4058{ 4059 MSG_LINK_SERVICE_BUFFER_POST_REQUEST *fc; 4060 PTR_SGE_TRANSACTION32 tep; 4061 PTR_SGE_SIMPLE32 se; 4062 bus_addr_t paddr; 4063 uint32_t fl; 4064 4065 paddr = req->req_pbuf; 4066 paddr += MPT_RQSL(mpt); 4067 4068 fc = req->req_vbuf; 4069 memset(fc, 0, MPT_REQUEST_AREA); 4070 fc->BufferCount = 1; 4071 fc->Function = MPI_FUNCTION_FC_LINK_SRVC_BUF_POST; 4072 fc->MsgContext = htole32(req->index | fc_els_handler_id); 4073 4074 /* 4075 * Okay, set up ELS buffer pointers. ELS buffer pointers 4076 * consist of a TE SGL element (with details length of zero) 4077 * followed by a SIMPLE SGL element which holds the address 4078 * of the buffer. 4079 */ 4080 4081 tep = (PTR_SGE_TRANSACTION32) &fc->SGL; 4082 4083 tep->ContextSize = 4; 4084 tep->Flags = 0; 4085 tep->TransactionContext[0] = htole32(ioindex); 4086 4087 se = (PTR_SGE_SIMPLE32) &tep->TransactionDetails[0]; 4088 fl = 4089 MPI_SGE_FLAGS_HOST_TO_IOC | 4090 MPI_SGE_FLAGS_SIMPLE_ELEMENT | 4091 MPI_SGE_FLAGS_LAST_ELEMENT | 4092 MPI_SGE_FLAGS_END_OF_LIST | 4093 MPI_SGE_FLAGS_END_OF_BUFFER; 4094 fl <<= MPI_SGE_FLAGS_SHIFT; 4095 fl |= (MPT_NRFM(mpt) - MPT_RQSL(mpt)); 4096 se->FlagsLength = htole32(fl); 4097 se->Address = htole32((uint32_t) paddr); 4098 mpt_lprt(mpt, MPT_PRT_DEBUG, 4099 "add ELS index %d ioindex %d for %p:%u\n", 4100 req->index, ioindex, req, req->serno); 4101 KASSERT(((req->state & REQ_STATE_LOCKED) != 0), 4102 ("mpt_fc_post_els: request not locked")); 4103 mpt_send_cmd(mpt, req); 4104} 4105 4106static void 4107mpt_post_target_command(struct mpt_softc *mpt, request_t *req, int ioindex) 4108{ 4109 PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST fc; 4110 PTR_CMD_BUFFER_DESCRIPTOR cb; 4111 bus_addr_t paddr; 4112 4113 paddr = req->req_pbuf; 4114 paddr += MPT_RQSL(mpt); 4115 memset(req->req_vbuf, 0, MPT_REQUEST_AREA); 4116 MPT_TGT_STATE(mpt, req)->state = TGT_STATE_LOADING; 4117 4118 fc = req->req_vbuf; 4119 fc->BufferCount = 1; 4120 fc->Function = MPI_FUNCTION_TARGET_CMD_BUFFER_POST; 4121 fc->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); 4122 4123 cb = &fc->Buffer[0]; 4124 cb->IoIndex = htole16(ioindex); 4125 cb->u.PhysicalAddress32 = htole32((U32) paddr); 4126 4127 mpt_check_doorbell(mpt); 4128 mpt_send_cmd(mpt, req); 4129} 4130 4131static int 4132mpt_add_els_buffers(struct mpt_softc *mpt) 4133{ 4134 int i; 4135 4136 if (mpt->is_fc == 0) { 4137 return (TRUE); 4138 } 4139 4140 if (mpt->els_cmds_allocated) { 4141 return (TRUE); 4142 } 4143 4144 mpt->els_cmd_ptrs = malloc(MPT_MAX_ELS * sizeof (request_t *), 4145 M_DEVBUF, M_NOWAIT | M_ZERO); 4146 4147 if (mpt->els_cmd_ptrs == NULL) { 4148 return (FALSE); 4149 } 4150 4151 /* 4152 * Feed the chip some ELS buffer resources 4153 */ 4154 for (i = 0; i < MPT_MAX_ELS; i++) { 4155 request_t *req = mpt_get_request(mpt, FALSE); 4156 if (req == NULL) { 4157 break; 4158 } 4159 req->state |= REQ_STATE_LOCKED; 4160 mpt->els_cmd_ptrs[i] = req; 4161 mpt_fc_post_els(mpt, req, i); 4162 } 4163 4164 if (i == 0) { 4165 mpt_prt(mpt, "unable to add ELS buffer resources\n"); 4166 free(mpt->els_cmd_ptrs, M_DEVBUF); 4167 mpt->els_cmd_ptrs = NULL; 4168 return (FALSE); 4169 } 4170 if (i != MPT_MAX_ELS) { 4171 mpt_lprt(mpt, MPT_PRT_INFO, 4172 "only added %d of %d ELS buffers\n", i, MPT_MAX_ELS); 4173 } 4174 mpt->els_cmds_allocated = i; 4175 return(TRUE); 4176} 4177 4178static int 4179mpt_add_target_commands(struct mpt_softc *mpt) 4180{ 4181 int i, max; 4182 4183 if (mpt->tgt_cmd_ptrs) { 4184 return (TRUE); 4185 } 4186 4187 max = MPT_MAX_REQUESTS(mpt) >> 1; 4188 if (max > mpt->mpt_max_tgtcmds) { 4189 max = mpt->mpt_max_tgtcmds; 4190 } 4191 mpt->tgt_cmd_ptrs = 4192 malloc(max * sizeof (request_t *), M_DEVBUF, M_NOWAIT | M_ZERO); 4193 if (mpt->tgt_cmd_ptrs == NULL) { 4194 mpt_prt(mpt, 4195 "mpt_add_target_commands: could not allocate cmd ptrs\n"); 4196 return (FALSE); 4197 } 4198 4199 for (i = 0; i < max; i++) { 4200 request_t *req; 4201 4202 req = mpt_get_request(mpt, FALSE); 4203 if (req == NULL) { 4204 break; 4205 } 4206 req->state |= REQ_STATE_LOCKED; 4207 mpt->tgt_cmd_ptrs[i] = req; 4208 mpt_post_target_command(mpt, req, i); 4209 } 4210 4211 4212 if (i == 0) { 4213 mpt_lprt(mpt, MPT_PRT_ERROR, "could not add any target bufs\n"); 4214 free(mpt->tgt_cmd_ptrs, M_DEVBUF); 4215 mpt->tgt_cmd_ptrs = NULL; 4216 return (FALSE); 4217 } 4218 4219 mpt->tgt_cmds_allocated = i; 4220 4221 if (i < max) { 4222 mpt_lprt(mpt, MPT_PRT_INFO, 4223 "added %d of %d target bufs\n", i, max); 4224 } 4225 return (i); 4226} 4227 4228static int 4229mpt_enable_lun(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun) 4230{ 4231 4232 if (tgt == CAM_TARGET_WILDCARD && lun == CAM_LUN_WILDCARD) { 4233 mpt->twildcard = 1; 4234 } else if (lun >= MPT_MAX_LUNS) { 4235 return (EINVAL); 4236 } else if (tgt != CAM_TARGET_WILDCARD && tgt != 0) { 4237 return (EINVAL); 4238 } 4239 if (mpt->tenabled == 0) { 4240 if (mpt->is_fc) { 4241 (void) mpt_fc_reset_link(mpt, 0); 4242 } 4243 mpt->tenabled = 1; 4244 } 4245 if (lun == CAM_LUN_WILDCARD) { 4246 mpt->trt_wildcard.enabled = 1; 4247 } else { 4248 mpt->trt[lun].enabled = 1; 4249 } 4250 return (0); 4251} 4252 4253static int 4254mpt_disable_lun(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun) 4255{ 4256 int i; 4257 4258 if (tgt == CAM_TARGET_WILDCARD && lun == CAM_LUN_WILDCARD) { 4259 mpt->twildcard = 0; 4260 } else if (lun >= MPT_MAX_LUNS) { 4261 return (EINVAL); 4262 } else if (tgt != CAM_TARGET_WILDCARD && tgt != 0) { 4263 return (EINVAL); 4264 } 4265 if (lun == CAM_LUN_WILDCARD) { 4266 mpt->trt_wildcard.enabled = 0; 4267 } else { 4268 mpt->trt[lun].enabled = 0; 4269 } 4270 for (i = 0; i < MPT_MAX_LUNS; i++) { 4271 if (mpt->trt[lun].enabled) { 4272 break; 4273 } 4274 } 4275 if (i == MPT_MAX_LUNS && mpt->twildcard == 0) { 4276 if (mpt->is_fc) { 4277 (void) mpt_fc_reset_link(mpt, 0); 4278 } 4279 mpt->tenabled = 0; 4280 } 4281 return (0); 4282} 4283 4284/* 4285 * Called with MPT lock held 4286 */ 4287static void 4288mpt_target_start_io(struct mpt_softc *mpt, union ccb *ccb) 4289{ 4290 struct ccb_scsiio *csio = &ccb->csio; 4291 request_t *cmd_req = MPT_TAG_2_REQ(mpt, csio->tag_id); 4292 mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req); 4293 4294 switch (tgt->state) { 4295 case TGT_STATE_IN_CAM: 4296 break; 4297 case TGT_STATE_MOVING_DATA: 4298 mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ); 4299 xpt_freeze_simq(mpt->sim, 1); 4300 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 4301 tgt->ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 4302 xpt_done(ccb); 4303 return; 4304 default: 4305 mpt_prt(mpt, "ccb %p flags 0x%x tag 0x%08x had bad request " 4306 "starting I/O\n", ccb, csio->ccb_h.flags, csio->tag_id); 4307 mpt_tgt_dump_req_state(mpt, cmd_req); 4308 mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); 4309 xpt_done(ccb); 4310 return; 4311 } 4312 4313 if (csio->dxfer_len) { 4314 bus_dmamap_callback_t *cb; 4315 PTR_MSG_TARGET_ASSIST_REQUEST ta; 4316 request_t *req; 4317 int error; 4318 4319 KASSERT((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE, 4320 ("dxfer_len %u but direction is NONE", csio->dxfer_len)); 4321 4322 if ((req = mpt_get_request(mpt, FALSE)) == NULL) { 4323 if (mpt->outofbeer == 0) { 4324 mpt->outofbeer = 1; 4325 xpt_freeze_simq(mpt->sim, 1); 4326 mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n"); 4327 } 4328 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 4329 mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ); 4330 xpt_done(ccb); 4331 return; 4332 } 4333 ccb->ccb_h.status = CAM_SIM_QUEUED | CAM_REQ_INPROG; 4334 if (sizeof (bus_addr_t) > 4) { 4335 cb = mpt_execute_req_a64; 4336 } else { 4337 cb = mpt_execute_req; 4338 } 4339 4340 req->ccb = ccb; 4341 ccb->ccb_h.ccb_req_ptr = req; 4342 4343 /* 4344 * Record the currently active ccb and the 4345 * request for it in our target state area. 4346 */ 4347 tgt->ccb = ccb; 4348 tgt->req = req; 4349 4350 memset(req->req_vbuf, 0, MPT_RQSL(mpt)); 4351 ta = req->req_vbuf; 4352 4353 if (mpt->is_sas) { 4354 PTR_MPI_TARGET_SSP_CMD_BUFFER ssp = 4355 cmd_req->req_vbuf; 4356 ta->QueueTag = ssp->InitiatorTag; 4357 } else if (mpt->is_spi) { 4358 PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp = 4359 cmd_req->req_vbuf; 4360 ta->QueueTag = sp->Tag; 4361 } 4362 ta->Function = MPI_FUNCTION_TARGET_ASSIST; 4363 ta->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); 4364 ta->ReplyWord = htole32(tgt->reply_desc); 4365 if (csio->ccb_h.target_lun > MPT_MAX_LUNS) { 4366 ta->LUN[0] = 4367 0x40 | ((csio->ccb_h.target_lun >> 8) & 0x3f); 4368 ta->LUN[1] = csio->ccb_h.target_lun & 0xff; 4369 } else { 4370 ta->LUN[1] = csio->ccb_h.target_lun; 4371 } 4372 4373 ta->RelativeOffset = tgt->bytes_xfered; 4374 ta->DataLength = ccb->csio.dxfer_len; 4375 if (ta->DataLength > tgt->resid) { 4376 ta->DataLength = tgt->resid; 4377 } 4378 4379 /* 4380 * XXX Should be done after data transfer completes? 4381 */ 4382 tgt->resid -= csio->dxfer_len; 4383 tgt->bytes_xfered += csio->dxfer_len; 4384 4385 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 4386 ta->TargetAssistFlags |= 4387 TARGET_ASSIST_FLAGS_DATA_DIRECTION; 4388 } 4389 4390#ifdef WE_TRUST_AUTO_GOOD_STATUS 4391 if ((ccb->ccb_h.flags & CAM_SEND_STATUS) && 4392 csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) { 4393 ta->TargetAssistFlags |= 4394 TARGET_ASSIST_FLAGS_AUTO_STATUS; 4395 } 4396#endif 4397 tgt->state = TGT_STATE_SETTING_UP_FOR_DATA; 4398 4399 mpt_lprt(mpt, MPT_PRT_DEBUG, 4400 "DATA_CCB %p tag %x %u bytes %u resid flg %x req %p:%u " 4401 "nxtstate=%d\n", csio, csio->tag_id, csio->dxfer_len, 4402 tgt->resid, ccb->ccb_h.flags, req, req->serno, tgt->state); 4403 4404 error = bus_dmamap_load_ccb(mpt->buffer_dmat, req->dmap, ccb, 4405 cb, req, 0); 4406 if (error == EINPROGRESS) { 4407 xpt_freeze_simq(mpt->sim, 1); 4408 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 4409 } 4410 } else { 4411 uint8_t *sp = NULL, sense[MPT_SENSE_SIZE]; 4412 4413 /* 4414 * XXX: I don't know why this seems to happen, but 4415 * XXX: completing the CCB seems to make things happy. 4416 * XXX: This seems to happen if the initiator requests 4417 * XXX: enough data that we have to do multiple CTIOs. 4418 */ 4419 if ((ccb->ccb_h.flags & CAM_SEND_STATUS) == 0) { 4420 mpt_lprt(mpt, MPT_PRT_DEBUG, 4421 "Meaningless STATUS CCB (%p): flags %x status %x " 4422 "resid %d bytes_xfered %u\n", ccb, ccb->ccb_h.flags, 4423 ccb->ccb_h.status, tgt->resid, tgt->bytes_xfered); 4424 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 4425 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 4426 xpt_done(ccb); 4427 return; 4428 } 4429 if (ccb->ccb_h.flags & CAM_SEND_SENSE) { 4430 sp = sense; 4431 memcpy(sp, &csio->sense_data, 4432 min(csio->sense_len, MPT_SENSE_SIZE)); 4433 } 4434 mpt_scsi_tgt_status(mpt, ccb, cmd_req, csio->scsi_status, sp); 4435 } 4436} 4437 4438static void 4439mpt_scsi_tgt_local(struct mpt_softc *mpt, request_t *cmd_req, 4440 uint32_t lun, int send, uint8_t *data, size_t length) 4441{ 4442 mpt_tgt_state_t *tgt; 4443 PTR_MSG_TARGET_ASSIST_REQUEST ta; 4444 SGE_SIMPLE32 *se; 4445 uint32_t flags; 4446 uint8_t *dptr; 4447 bus_addr_t pptr; 4448 request_t *req; 4449 4450 /* 4451 * We enter with resid set to the data load for the command. 4452 */ 4453 tgt = MPT_TGT_STATE(mpt, cmd_req); 4454 if (length == 0 || tgt->resid == 0) { 4455 tgt->resid = 0; 4456 mpt_scsi_tgt_status(mpt, NULL, cmd_req, 0, NULL); 4457 return; 4458 } 4459 4460 if ((req = mpt_get_request(mpt, FALSE)) == NULL) { 4461 mpt_prt(mpt, "out of resources- dropping local response\n"); 4462 return; 4463 } 4464 tgt->is_local = 1; 4465 4466 4467 memset(req->req_vbuf, 0, MPT_RQSL(mpt)); 4468 ta = req->req_vbuf; 4469 4470 if (mpt->is_sas) { 4471 PTR_MPI_TARGET_SSP_CMD_BUFFER ssp = cmd_req->req_vbuf; 4472 ta->QueueTag = ssp->InitiatorTag; 4473 } else if (mpt->is_spi) { 4474 PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp = cmd_req->req_vbuf; 4475 ta->QueueTag = sp->Tag; 4476 } 4477 ta->Function = MPI_FUNCTION_TARGET_ASSIST; 4478 ta->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); 4479 ta->ReplyWord = htole32(tgt->reply_desc); 4480 if (lun > MPT_MAX_LUNS) { 4481 ta->LUN[0] = 0x40 | ((lun >> 8) & 0x3f); 4482 ta->LUN[1] = lun & 0xff; 4483 } else { 4484 ta->LUN[1] = lun; 4485 } 4486 ta->RelativeOffset = 0; 4487 ta->DataLength = length; 4488 4489 dptr = req->req_vbuf; 4490 dptr += MPT_RQSL(mpt); 4491 pptr = req->req_pbuf; 4492 pptr += MPT_RQSL(mpt); 4493 memcpy(dptr, data, min(length, MPT_RQSL(mpt))); 4494 4495 se = (SGE_SIMPLE32 *) &ta->SGL[0]; 4496 memset(se, 0,sizeof (*se)); 4497 4498 flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT; 4499 if (send) { 4500 ta->TargetAssistFlags |= TARGET_ASSIST_FLAGS_DATA_DIRECTION; 4501 flags |= MPI_SGE_FLAGS_HOST_TO_IOC; 4502 } 4503 se->Address = pptr; 4504 MPI_pSGE_SET_LENGTH(se, length); 4505 flags |= MPI_SGE_FLAGS_LAST_ELEMENT; 4506 flags |= MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER; 4507 MPI_pSGE_SET_FLAGS(se, flags); 4508 4509 tgt->ccb = NULL; 4510 tgt->req = req; 4511 tgt->resid -= length; 4512 tgt->bytes_xfered = length; 4513#ifdef WE_TRUST_AUTO_GOOD_STATUS 4514 tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS; 4515#else 4516 tgt->state = TGT_STATE_MOVING_DATA; 4517#endif 4518 mpt_send_cmd(mpt, req); 4519} 4520 4521/* 4522 * Abort queued up CCBs 4523 */ 4524static cam_status 4525mpt_abort_target_ccb(struct mpt_softc *mpt, union ccb *ccb) 4526{ 4527 struct mpt_hdr_stailq *lp; 4528 struct ccb_hdr *srch; 4529 int found = 0; 4530 union ccb *accb = ccb->cab.abort_ccb; 4531 tgt_resource_t *trtp; 4532 4533 mpt_lprt(mpt, MPT_PRT_DEBUG, "aborting ccb %p\n", accb); 4534 4535 if (ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 4536 trtp = &mpt->trt_wildcard; 4537 } else { 4538 trtp = &mpt->trt[ccb->ccb_h.target_lun]; 4539 } 4540 4541 if (accb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) { 4542 lp = &trtp->atios; 4543 } else if (accb->ccb_h.func_code == XPT_IMMEDIATE_NOTIFY) { 4544 lp = &trtp->inots; 4545 } else { 4546 return (CAM_REQ_INVALID); 4547 } 4548 4549 STAILQ_FOREACH(srch, lp, sim_links.stqe) { 4550 if (srch == &accb->ccb_h) { 4551 found = 1; 4552 STAILQ_REMOVE(lp, srch, ccb_hdr, sim_links.stqe); 4553 break; 4554 } 4555 } 4556 if (found) { 4557 accb->ccb_h.status = CAM_REQ_ABORTED; 4558 xpt_done(accb); 4559 return (CAM_REQ_CMP); 4560 } 4561 mpt_prt(mpt, "mpt_abort_tgt_ccb: CCB %p not found\n", ccb); 4562 return (CAM_PATH_INVALID); 4563} 4564 4565/* 4566 * Ask the MPT to abort the current target command 4567 */ 4568static int 4569mpt_abort_target_cmd(struct mpt_softc *mpt, request_t *cmd_req) 4570{ 4571 int error; 4572 request_t *req; 4573 PTR_MSG_TARGET_MODE_ABORT abtp; 4574 4575 req = mpt_get_request(mpt, FALSE); 4576 if (req == NULL) { 4577 return (-1); 4578 } 4579 abtp = req->req_vbuf; 4580 memset(abtp, 0, sizeof (*abtp)); 4581 4582 abtp->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); 4583 abtp->AbortType = TARGET_MODE_ABORT_TYPE_EXACT_IO; 4584 abtp->Function = MPI_FUNCTION_TARGET_MODE_ABORT; 4585 abtp->ReplyWord = htole32(MPT_TGT_STATE(mpt, cmd_req)->reply_desc); 4586 error = 0; 4587 if (mpt->is_fc || mpt->is_sas) { 4588 mpt_send_cmd(mpt, req); 4589 } else { 4590 error = mpt_send_handshake_cmd(mpt, sizeof(*req), req); 4591 } 4592 return (error); 4593} 4594 4595/* 4596 * WE_TRUST_AUTO_GOOD_STATUS- I've found that setting 4597 * TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS leads the 4598 * FC929 to set bogus FC_RSP fields (nonzero residuals 4599 * but w/o RESID fields set). This causes QLogic initiators 4600 * to think maybe that a frame was lost. 4601 * 4602 * WE_CAN_USE_AUTO_REPOST- we can't use AUTO_REPOST because 4603 * we use allocated requests to do TARGET_ASSIST and we 4604 * need to know when to release them. 4605 */ 4606 4607static void 4608mpt_scsi_tgt_status(struct mpt_softc *mpt, union ccb *ccb, request_t *cmd_req, 4609 uint8_t status, uint8_t const *sense_data) 4610{ 4611 uint8_t *cmd_vbuf; 4612 mpt_tgt_state_t *tgt; 4613 PTR_MSG_TARGET_STATUS_SEND_REQUEST tp; 4614 request_t *req; 4615 bus_addr_t paddr; 4616 int resplen = 0; 4617 uint32_t fl; 4618 4619 cmd_vbuf = cmd_req->req_vbuf; 4620 cmd_vbuf += MPT_RQSL(mpt); 4621 tgt = MPT_TGT_STATE(mpt, cmd_req); 4622 4623 if ((req = mpt_get_request(mpt, FALSE)) == NULL) { 4624 if (mpt->outofbeer == 0) { 4625 mpt->outofbeer = 1; 4626 xpt_freeze_simq(mpt->sim, 1); 4627 mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n"); 4628 } 4629 if (ccb) { 4630 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 4631 mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ); 4632 xpt_done(ccb); 4633 } else { 4634 mpt_prt(mpt, 4635 "could not allocate status request- dropping\n"); 4636 } 4637 return; 4638 } 4639 req->ccb = ccb; 4640 if (ccb) { 4641 ccb->ccb_h.ccb_mpt_ptr = mpt; 4642 ccb->ccb_h.ccb_req_ptr = req; 4643 } 4644 4645 /* 4646 * Record the currently active ccb, if any, and the 4647 * request for it in our target state area. 4648 */ 4649 tgt->ccb = ccb; 4650 tgt->req = req; 4651 tgt->state = TGT_STATE_SENDING_STATUS; 4652 4653 tp = req->req_vbuf; 4654 paddr = req->req_pbuf; 4655 paddr += MPT_RQSL(mpt); 4656 4657 memset(tp, 0, sizeof (*tp)); 4658 tp->Function = MPI_FUNCTION_TARGET_STATUS_SEND; 4659 if (mpt->is_fc) { 4660 PTR_MPI_TARGET_FCP_CMD_BUFFER fc = 4661 (PTR_MPI_TARGET_FCP_CMD_BUFFER) cmd_vbuf; 4662 uint8_t *sts_vbuf; 4663 uint32_t *rsp; 4664 4665 sts_vbuf = req->req_vbuf; 4666 sts_vbuf += MPT_RQSL(mpt); 4667 rsp = (uint32_t *) sts_vbuf; 4668 memcpy(tp->LUN, fc->FcpLun, sizeof (tp->LUN)); 4669 4670 /* 4671 * The MPI_TARGET_FCP_RSP_BUFFER define is unfortunate. 4672 * It has to be big-endian in memory and is organized 4673 * in 32 bit words, which are much easier to deal with 4674 * as words which are swizzled as needed. 4675 * 4676 * All we're filling here is the FC_RSP payload. 4677 * We may just have the chip synthesize it if 4678 * we have no residual and an OK status. 4679 * 4680 */ 4681 memset(rsp, 0, sizeof (MPI_TARGET_FCP_RSP_BUFFER)); 4682 4683 rsp[2] = status; 4684 if (tgt->resid) { 4685 rsp[2] |= 0x800; /* XXXX NEED MNEMONIC!!!! */ 4686 rsp[3] = htobe32(tgt->resid); 4687#ifdef WE_TRUST_AUTO_GOOD_STATUS 4688 resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER); 4689#endif 4690 } 4691 if (status == SCSI_STATUS_CHECK_COND) { 4692 int i; 4693 4694 rsp[2] |= 0x200; /* XXXX NEED MNEMONIC!!!! */ 4695 rsp[4] = htobe32(MPT_SENSE_SIZE); 4696 if (sense_data) { 4697 memcpy(&rsp[8], sense_data, MPT_SENSE_SIZE); 4698 } else { 4699 mpt_prt(mpt, "mpt_scsi_tgt_status: CHECK CONDI" 4700 "TION but no sense data?\n"); 4701 memset(&rsp, 0, MPT_SENSE_SIZE); 4702 } 4703 for (i = 8; i < (8 + (MPT_SENSE_SIZE >> 2)); i++) { 4704 rsp[i] = htobe32(rsp[i]); 4705 } 4706#ifdef WE_TRUST_AUTO_GOOD_STATUS 4707 resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER); 4708#endif 4709 } 4710#ifndef WE_TRUST_AUTO_GOOD_STATUS 4711 resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER); 4712#endif 4713 rsp[2] = htobe32(rsp[2]); 4714 } else if (mpt->is_sas) { 4715 PTR_MPI_TARGET_SSP_CMD_BUFFER ssp = 4716 (PTR_MPI_TARGET_SSP_CMD_BUFFER) cmd_vbuf; 4717 memcpy(tp->LUN, ssp->LogicalUnitNumber, sizeof (tp->LUN)); 4718 } else { 4719 PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp = 4720 (PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER) cmd_vbuf; 4721 tp->StatusCode = status; 4722 tp->QueueTag = htole16(sp->Tag); 4723 memcpy(tp->LUN, sp->LogicalUnitNumber, sizeof (tp->LUN)); 4724 } 4725 4726 tp->ReplyWord = htole32(tgt->reply_desc); 4727 tp->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); 4728 4729#ifdef WE_CAN_USE_AUTO_REPOST 4730 tp->MsgFlags = TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER; 4731#endif 4732 if (status == SCSI_STATUS_OK && resplen == 0) { 4733 tp->MsgFlags |= TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS; 4734 } else { 4735 tp->StatusDataSGE.u.Address32 = htole32((uint32_t) paddr); 4736 fl = 4737 MPI_SGE_FLAGS_HOST_TO_IOC | 4738 MPI_SGE_FLAGS_SIMPLE_ELEMENT | 4739 MPI_SGE_FLAGS_LAST_ELEMENT | 4740 MPI_SGE_FLAGS_END_OF_LIST | 4741 MPI_SGE_FLAGS_END_OF_BUFFER; 4742 fl <<= MPI_SGE_FLAGS_SHIFT; 4743 fl |= resplen; 4744 tp->StatusDataSGE.FlagsLength = htole32(fl); 4745 } 4746 4747 mpt_lprt(mpt, MPT_PRT_DEBUG, 4748 "STATUS_CCB %p (wit%s sense) tag %x req %p:%u resid %u\n", 4749 ccb, sense_data?"h" : "hout", ccb? ccb->csio.tag_id : -1, req, 4750 req->serno, tgt->resid); 4751 if (ccb) { 4752 ccb->ccb_h.status = CAM_SIM_QUEUED | CAM_REQ_INPROG; 4753 mpt_req_timeout(req, 60 * hz, mpt_timeout, ccb); 4754 } 4755 mpt_send_cmd(mpt, req); 4756} 4757 4758static void 4759mpt_scsi_tgt_tsk_mgmt(struct mpt_softc *mpt, request_t *req, mpt_task_mgmt_t fc, 4760 tgt_resource_t *trtp, int init_id) 4761{ 4762 struct ccb_immediate_notify *inot; 4763 mpt_tgt_state_t *tgt; 4764 4765 tgt = MPT_TGT_STATE(mpt, req); 4766 inot = (struct ccb_immediate_notify *) STAILQ_FIRST(&trtp->inots); 4767 if (inot == NULL) { 4768 mpt_lprt(mpt, MPT_PRT_WARN, "no INOTSs- sending back BSY\n"); 4769 mpt_scsi_tgt_status(mpt, NULL, req, SCSI_STATUS_BUSY, NULL); 4770 return; 4771 } 4772 STAILQ_REMOVE_HEAD(&trtp->inots, sim_links.stqe); 4773 mpt_lprt(mpt, MPT_PRT_DEBUG1, 4774 "Get FREE INOT %p lun %d\n", inot, inot->ccb_h.target_lun); 4775 4776 inot->initiator_id = init_id; /* XXX */ 4777 /* 4778 * This is a somewhat grotesque attempt to map from task management 4779 * to old style SCSI messages. God help us all. 4780 */ 4781 switch (fc) { 4782 case MPT_ABORT_TASK_SET: 4783 inot->arg = MSG_ABORT_TAG; 4784 break; 4785 case MPT_CLEAR_TASK_SET: 4786 inot->arg = MSG_CLEAR_TASK_SET; 4787 break; 4788 case MPT_TARGET_RESET: 4789 inot->arg = MSG_TARGET_RESET; 4790 break; 4791 case MPT_CLEAR_ACA: 4792 inot->arg = MSG_CLEAR_ACA; 4793 break; 4794 case MPT_TERMINATE_TASK: 4795 inot->arg = MSG_ABORT_TAG; 4796 break; 4797 default: 4798 inot->arg = MSG_NOOP; 4799 break; 4800 } 4801 /* 4802 * XXX KDM we need the sequence/tag number for the target of the 4803 * task management operation, especially if it is an abort. 4804 */ 4805 tgt->ccb = (union ccb *) inot; 4806 inot->ccb_h.status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 4807 xpt_done((union ccb *)inot); 4808} 4809 4810static void 4811mpt_scsi_tgt_atio(struct mpt_softc *mpt, request_t *req, uint32_t reply_desc) 4812{ 4813 static uint8_t null_iqd[SHORT_INQUIRY_LENGTH] = { 4814 0x7f, 0x00, 0x02, 0x02, 0x20, 0x00, 0x00, 0x32, 4815 'F', 'R', 'E', 'E', 'B', 'S', 'D', ' ', 4816 'L', 'S', 'I', '-', 'L', 'O', 'G', 'I', 4817 'C', ' ', 'N', 'U', 'L', 'D', 'E', 'V', 4818 '0', '0', '0', '1' 4819 }; 4820 struct ccb_accept_tio *atiop; 4821 lun_id_t lun; 4822 int tag_action = 0; 4823 mpt_tgt_state_t *tgt; 4824 tgt_resource_t *trtp = NULL; 4825 U8 *lunptr; 4826 U8 *vbuf; 4827 U16 itag; 4828 U16 ioindex; 4829 mpt_task_mgmt_t fct = MPT_NIL_TMT_VALUE; 4830 uint8_t *cdbp; 4831 4832 /* 4833 * Stash info for the current command where we can get at it later. 4834 */ 4835 vbuf = req->req_vbuf; 4836 vbuf += MPT_RQSL(mpt); 4837 4838 /* 4839 * Get our state pointer set up. 4840 */ 4841 tgt = MPT_TGT_STATE(mpt, req); 4842 if (tgt->state != TGT_STATE_LOADED) { 4843 mpt_tgt_dump_req_state(mpt, req); 4844 panic("bad target state in mpt_scsi_tgt_atio"); 4845 } 4846 memset(tgt, 0, sizeof (mpt_tgt_state_t)); 4847 tgt->state = TGT_STATE_IN_CAM; 4848 tgt->reply_desc = reply_desc; 4849 ioindex = GET_IO_INDEX(reply_desc); 4850 if (mpt->verbose >= MPT_PRT_DEBUG) { 4851 mpt_dump_data(mpt, "mpt_scsi_tgt_atio response", vbuf, 4852 max(sizeof (MPI_TARGET_FCP_CMD_BUFFER), 4853 max(sizeof (MPI_TARGET_SSP_CMD_BUFFER), 4854 sizeof (MPI_TARGET_SCSI_SPI_CMD_BUFFER)))); 4855 } 4856 if (mpt->is_fc) { 4857 PTR_MPI_TARGET_FCP_CMD_BUFFER fc; 4858 fc = (PTR_MPI_TARGET_FCP_CMD_BUFFER) vbuf; 4859 if (fc->FcpCntl[2]) { 4860 /* 4861 * Task Management Request 4862 */ 4863 switch (fc->FcpCntl[2]) { 4864 case 0x2: 4865 fct = MPT_ABORT_TASK_SET; 4866 break; 4867 case 0x4: 4868 fct = MPT_CLEAR_TASK_SET; 4869 break; 4870 case 0x20: 4871 fct = MPT_TARGET_RESET; 4872 break; 4873 case 0x40: 4874 fct = MPT_CLEAR_ACA; 4875 break; 4876 case 0x80: 4877 fct = MPT_TERMINATE_TASK; 4878 break; 4879 default: 4880 mpt_prt(mpt, "CORRUPTED TASK MGMT BITS: 0x%x\n", 4881 fc->FcpCntl[2]); 4882 mpt_scsi_tgt_status(mpt, 0, req, 4883 SCSI_STATUS_OK, 0); 4884 return; 4885 } 4886 } else { 4887 switch (fc->FcpCntl[1]) { 4888 case 0: 4889 tag_action = MSG_SIMPLE_Q_TAG; 4890 break; 4891 case 1: 4892 tag_action = MSG_HEAD_OF_Q_TAG; 4893 break; 4894 case 2: 4895 tag_action = MSG_ORDERED_Q_TAG; 4896 break; 4897 default: 4898 /* 4899 * Bah. Ignore Untagged Queing and ACA 4900 */ 4901 tag_action = MSG_SIMPLE_Q_TAG; 4902 break; 4903 } 4904 } 4905 tgt->resid = be32toh(fc->FcpDl); 4906 cdbp = fc->FcpCdb; 4907 lunptr = fc->FcpLun; 4908 itag = be16toh(fc->OptionalOxid); 4909 } else if (mpt->is_sas) { 4910 PTR_MPI_TARGET_SSP_CMD_BUFFER ssp; 4911 ssp = (PTR_MPI_TARGET_SSP_CMD_BUFFER) vbuf; 4912 cdbp = ssp->CDB; 4913 lunptr = ssp->LogicalUnitNumber; 4914 itag = ssp->InitiatorTag; 4915 } else { 4916 PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp; 4917 sp = (PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER) vbuf; 4918 cdbp = sp->CDB; 4919 lunptr = sp->LogicalUnitNumber; 4920 itag = sp->Tag; 4921 } 4922 4923 /* 4924 * Generate a simple lun 4925 */ 4926 switch (lunptr[0] & 0xc0) { 4927 case 0x40: 4928 lun = ((lunptr[0] & 0x3f) << 8) | lunptr[1]; 4929 break; 4930 case 0: 4931 lun = lunptr[1]; 4932 break; 4933 default: 4934 mpt_lprt(mpt, MPT_PRT_ERROR, "cannot handle this type lun\n"); 4935 lun = 0xffff; 4936 break; 4937 } 4938 4939 /* 4940 * Deal with non-enabled or bad luns here. 4941 */ 4942 if (lun >= MPT_MAX_LUNS || mpt->tenabled == 0 || 4943 mpt->trt[lun].enabled == 0) { 4944 if (mpt->twildcard) { 4945 trtp = &mpt->trt_wildcard; 4946 } else if (fct == MPT_NIL_TMT_VALUE) { 4947 /* 4948 * In this case, we haven't got an upstream listener 4949 * for either a specific lun or wildcard luns. We 4950 * have to make some sensible response. For regular 4951 * inquiry, just return some NOT HERE inquiry data. 4952 * For VPD inquiry, report illegal field in cdb. 4953 * For REQUEST SENSE, just return NO SENSE data. 4954 * REPORT LUNS gets illegal command. 4955 * All other commands get 'no such device'. 4956 */ 4957 uint8_t *sp, cond, buf[MPT_SENSE_SIZE]; 4958 size_t len; 4959 4960 memset(buf, 0, MPT_SENSE_SIZE); 4961 cond = SCSI_STATUS_CHECK_COND; 4962 buf[0] = 0xf0; 4963 buf[2] = 0x5; 4964 buf[7] = 0x8; 4965 sp = buf; 4966 tgt->tag_id = MPT_MAKE_TAGID(mpt, req, ioindex); 4967 4968 switch (cdbp[0]) { 4969 case INQUIRY: 4970 { 4971 if (cdbp[1] != 0) { 4972 buf[12] = 0x26; 4973 buf[13] = 0x01; 4974 break; 4975 } 4976 len = min(tgt->resid, cdbp[4]); 4977 len = min(len, sizeof (null_iqd)); 4978 mpt_lprt(mpt, MPT_PRT_DEBUG, 4979 "local inquiry %ld bytes\n", (long) len); 4980 mpt_scsi_tgt_local(mpt, req, lun, 1, 4981 null_iqd, len); 4982 return; 4983 } 4984 case REQUEST_SENSE: 4985 { 4986 buf[2] = 0x0; 4987 len = min(tgt->resid, cdbp[4]); 4988 len = min(len, sizeof (buf)); 4989 mpt_lprt(mpt, MPT_PRT_DEBUG, 4990 "local reqsense %ld bytes\n", (long) len); 4991 mpt_scsi_tgt_local(mpt, req, lun, 1, 4992 buf, len); 4993 return; 4994 } 4995 case REPORT_LUNS: 4996 mpt_lprt(mpt, MPT_PRT_DEBUG, "REPORT LUNS\n"); 4997 buf[12] = 0x26; 4998 return; 4999 default: 5000 mpt_lprt(mpt, MPT_PRT_DEBUG, 5001 "CMD 0x%x to unmanaged lun %u\n", 5002 cdbp[0], lun); 5003 buf[12] = 0x25; 5004 break; 5005 } 5006 mpt_scsi_tgt_status(mpt, NULL, req, cond, sp); 5007 return; 5008 } 5009 /* otherwise, leave trtp NULL */ 5010 } else { 5011 trtp = &mpt->trt[lun]; 5012 } 5013 5014 /* 5015 * Deal with any task management 5016 */ 5017 if (fct != MPT_NIL_TMT_VALUE) { 5018 if (trtp == NULL) { 5019 mpt_prt(mpt, "task mgmt function %x but no listener\n", 5020 fct); 5021 mpt_scsi_tgt_status(mpt, 0, req, 5022 SCSI_STATUS_OK, 0); 5023 } else { 5024 mpt_scsi_tgt_tsk_mgmt(mpt, req, fct, trtp, 5025 GET_INITIATOR_INDEX(reply_desc)); 5026 } 5027 return; 5028 } 5029 5030 5031 atiop = (struct ccb_accept_tio *) STAILQ_FIRST(&trtp->atios); 5032 if (atiop == NULL) { 5033 mpt_lprt(mpt, MPT_PRT_WARN, 5034 "no ATIOs for lun %u- sending back %s\n", lun, 5035 mpt->tenabled? "QUEUE FULL" : "BUSY"); 5036 mpt_scsi_tgt_status(mpt, NULL, req, 5037 mpt->tenabled? SCSI_STATUS_QUEUE_FULL : SCSI_STATUS_BUSY, 5038 NULL); 5039 return; 5040 } 5041 STAILQ_REMOVE_HEAD(&trtp->atios, sim_links.stqe); 5042 mpt_lprt(mpt, MPT_PRT_DEBUG1, 5043 "Get FREE ATIO %p lun %d\n", atiop, atiop->ccb_h.target_lun); 5044 atiop->ccb_h.ccb_mpt_ptr = mpt; 5045 atiop->ccb_h.status = CAM_CDB_RECVD; 5046 atiop->ccb_h.target_lun = lun; 5047 atiop->sense_len = 0; 5048 atiop->init_id = GET_INITIATOR_INDEX(reply_desc); 5049 atiop->cdb_len = mpt_cdblen(cdbp[0], 16); 5050 memcpy(atiop->cdb_io.cdb_bytes, cdbp, atiop->cdb_len); 5051 5052 /* 5053 * The tag we construct here allows us to find the 5054 * original request that the command came in with. 5055 * 5056 * This way we don't have to depend on anything but the 5057 * tag to find things when CCBs show back up from CAM. 5058 */ 5059 atiop->tag_id = MPT_MAKE_TAGID(mpt, req, ioindex); 5060 tgt->tag_id = atiop->tag_id; 5061 if (tag_action) { 5062 atiop->tag_action = tag_action; 5063 atiop->ccb_h.flags = CAM_TAG_ACTION_VALID; 5064 } 5065 if (mpt->verbose >= MPT_PRT_DEBUG) { 5066 int i; 5067 mpt_prt(mpt, "START_CCB %p for lun %u CDB=<", atiop, 5068 atiop->ccb_h.target_lun); 5069 for (i = 0; i < atiop->cdb_len; i++) { 5070 mpt_prtc(mpt, "%02x%c", cdbp[i] & 0xff, 5071 (i == (atiop->cdb_len - 1))? '>' : ' '); 5072 } 5073 mpt_prtc(mpt, " itag %x tag %x rdesc %x dl=%u\n", 5074 itag, atiop->tag_id, tgt->reply_desc, tgt->resid); 5075 } 5076 5077 xpt_done((union ccb *)atiop); 5078} 5079 5080static void 5081mpt_tgt_dump_tgt_state(struct mpt_softc *mpt, request_t *req) 5082{ 5083 mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, req); 5084 5085 mpt_prt(mpt, "req %p:%u tgt:rdesc 0x%x resid %u xfrd %u ccb %p treq %p " 5086 "nx %d tag 0x%08x state=%d\n", req, req->serno, tgt->reply_desc, 5087 tgt->resid, tgt->bytes_xfered, tgt->ccb, tgt->req, tgt->nxfers, 5088 tgt->tag_id, tgt->state); 5089} 5090 5091static void 5092mpt_tgt_dump_req_state(struct mpt_softc *mpt, request_t *req) 5093{ 5094 5095 mpt_prt(mpt, "req %p:%u index %u (%x) state %x\n", req, req->serno, 5096 req->index, req->index, req->state); 5097 mpt_tgt_dump_tgt_state(mpt, req); 5098} 5099 5100static int 5101mpt_scsi_tgt_reply_handler(struct mpt_softc *mpt, request_t *req, 5102 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 5103{ 5104 int dbg; 5105 union ccb *ccb; 5106 U16 status; 5107 5108 if (reply_frame == NULL) { 5109 /* 5110 * Figure out what the state of the command is. 5111 */ 5112 mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, req); 5113 5114#ifdef INVARIANTS 5115 mpt_req_spcl(mpt, req, "turbo scsi_tgt_reply", __LINE__); 5116 if (tgt->req) { 5117 mpt_req_not_spcl(mpt, tgt->req, 5118 "turbo scsi_tgt_reply associated req", __LINE__); 5119 } 5120#endif 5121 switch(tgt->state) { 5122 case TGT_STATE_LOADED: 5123 /* 5124 * This is a new command starting. 5125 */ 5126 mpt_scsi_tgt_atio(mpt, req, reply_desc); 5127 break; 5128 case TGT_STATE_MOVING_DATA: 5129 { 5130 uint8_t *sp = NULL, sense[MPT_SENSE_SIZE]; 5131 5132 ccb = tgt->ccb; 5133 if (tgt->req == NULL) { 5134 panic("mpt: turbo target reply with null " 5135 "associated request moving data"); 5136 /* NOTREACHED */ 5137 } 5138 if (ccb == NULL) { 5139 if (tgt->is_local == 0) { 5140 panic("mpt: turbo target reply with " 5141 "null associated ccb moving data"); 5142 /* NOTREACHED */ 5143 } 5144 mpt_lprt(mpt, MPT_PRT_DEBUG, 5145 "TARGET_ASSIST local done\n"); 5146 TAILQ_REMOVE(&mpt->request_pending_list, 5147 tgt->req, links); 5148 mpt_free_request(mpt, tgt->req); 5149 tgt->req = NULL; 5150 mpt_scsi_tgt_status(mpt, NULL, req, 5151 0, NULL); 5152 return (TRUE); 5153 } 5154 tgt->ccb = NULL; 5155 tgt->nxfers++; 5156 mpt_req_untimeout(req, mpt_timeout, ccb); 5157 mpt_lprt(mpt, MPT_PRT_DEBUG, 5158 "TARGET_ASSIST %p (req %p:%u) done tag 0x%x\n", 5159 ccb, tgt->req, tgt->req->serno, ccb->csio.tag_id); 5160 /* 5161 * Free the Target Assist Request 5162 */ 5163 KASSERT(tgt->req->ccb == ccb, 5164 ("tgt->req %p:%u tgt->req->ccb %p", tgt->req, 5165 tgt->req->serno, tgt->req->ccb)); 5166 TAILQ_REMOVE(&mpt->request_pending_list, 5167 tgt->req, links); 5168 mpt_free_request(mpt, tgt->req); 5169 tgt->req = NULL; 5170 5171 /* 5172 * Do we need to send status now? That is, are 5173 * we done with all our data transfers? 5174 */ 5175 if ((ccb->ccb_h.flags & CAM_SEND_STATUS) == 0) { 5176 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 5177 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 5178 KASSERT(ccb->ccb_h.status, 5179 ("zero ccb sts at %d", __LINE__)); 5180 tgt->state = TGT_STATE_IN_CAM; 5181 if (mpt->outofbeer) { 5182 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 5183 mpt->outofbeer = 0; 5184 mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n"); 5185 } 5186 xpt_done(ccb); 5187 break; 5188 } 5189 /* 5190 * Otherwise, send status (and sense) 5191 */ 5192 if (ccb->ccb_h.flags & CAM_SEND_SENSE) { 5193 sp = sense; 5194 memcpy(sp, &ccb->csio.sense_data, 5195 min(ccb->csio.sense_len, MPT_SENSE_SIZE)); 5196 } 5197 mpt_scsi_tgt_status(mpt, ccb, req, 5198 ccb->csio.scsi_status, sp); 5199 break; 5200 } 5201 case TGT_STATE_SENDING_STATUS: 5202 case TGT_STATE_MOVING_DATA_AND_STATUS: 5203 { 5204 int ioindex; 5205 ccb = tgt->ccb; 5206 5207 if (tgt->req == NULL) { 5208 panic("mpt: turbo target reply with null " 5209 "associated request sending status"); 5210 /* NOTREACHED */ 5211 } 5212 5213 if (ccb) { 5214 tgt->ccb = NULL; 5215 if (tgt->state == 5216 TGT_STATE_MOVING_DATA_AND_STATUS) { 5217 tgt->nxfers++; 5218 } 5219 mpt_req_untimeout(req, mpt_timeout, ccb); 5220 if (ccb->ccb_h.flags & CAM_SEND_SENSE) { 5221 ccb->ccb_h.status |= CAM_SENT_SENSE; 5222 } 5223 mpt_lprt(mpt, MPT_PRT_DEBUG, 5224 "TARGET_STATUS tag %x sts %x flgs %x req " 5225 "%p\n", ccb->csio.tag_id, ccb->ccb_h.status, 5226 ccb->ccb_h.flags, tgt->req); 5227 /* 5228 * Free the Target Send Status Request 5229 */ 5230 KASSERT(tgt->req->ccb == ccb, 5231 ("tgt->req %p:%u tgt->req->ccb %p", 5232 tgt->req, tgt->req->serno, tgt->req->ccb)); 5233 /* 5234 * Notify CAM that we're done 5235 */ 5236 mpt_set_ccb_status(ccb, CAM_REQ_CMP); 5237 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 5238 KASSERT(ccb->ccb_h.status, 5239 ("ZERO ccb sts at %d", __LINE__)); 5240 tgt->ccb = NULL; 5241 } else { 5242 mpt_lprt(mpt, MPT_PRT_DEBUG, 5243 "TARGET_STATUS non-CAM for req %p:%u\n", 5244 tgt->req, tgt->req->serno); 5245 } 5246 TAILQ_REMOVE(&mpt->request_pending_list, 5247 tgt->req, links); 5248 mpt_free_request(mpt, tgt->req); 5249 tgt->req = NULL; 5250 5251 /* 5252 * And re-post the Command Buffer. 5253 * This will reset the state. 5254 */ 5255 ioindex = GET_IO_INDEX(reply_desc); 5256 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 5257 tgt->is_local = 0; 5258 mpt_post_target_command(mpt, req, ioindex); 5259 5260 /* 5261 * And post a done for anyone who cares 5262 */ 5263 if (ccb) { 5264 if (mpt->outofbeer) { 5265 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 5266 mpt->outofbeer = 0; 5267 mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n"); 5268 } 5269 xpt_done(ccb); 5270 } 5271 break; 5272 } 5273 case TGT_STATE_NIL: /* XXX This Never Happens XXX */ 5274 tgt->state = TGT_STATE_LOADED; 5275 break; 5276 default: 5277 mpt_prt(mpt, "Unknown Target State 0x%x in Context " 5278 "Reply Function\n", tgt->state); 5279 } 5280 return (TRUE); 5281 } 5282 5283 status = le16toh(reply_frame->IOCStatus); 5284 if (status != MPI_IOCSTATUS_SUCCESS) { 5285 dbg = MPT_PRT_ERROR; 5286 } else { 5287 dbg = MPT_PRT_DEBUG1; 5288 } 5289 5290 mpt_lprt(mpt, dbg, 5291 "SCSI_TGT REPLY: req=%p:%u reply=%p func=%x IOCstatus 0x%x\n", 5292 req, req->serno, reply_frame, reply_frame->Function, status); 5293 5294 switch (reply_frame->Function) { 5295 case MPI_FUNCTION_TARGET_CMD_BUFFER_POST: 5296 { 5297 mpt_tgt_state_t *tgt; 5298#ifdef INVARIANTS 5299 mpt_req_spcl(mpt, req, "tgt reply BUFFER POST", __LINE__); 5300#endif 5301 if (status != MPI_IOCSTATUS_SUCCESS) { 5302 /* 5303 * XXX What to do? 5304 */ 5305 break; 5306 } 5307 tgt = MPT_TGT_STATE(mpt, req); 5308 KASSERT(tgt->state == TGT_STATE_LOADING, 5309 ("bad state 0x%x on reply to buffer post", tgt->state)); 5310 mpt_assign_serno(mpt, req); 5311 tgt->state = TGT_STATE_LOADED; 5312 break; 5313 } 5314 case MPI_FUNCTION_TARGET_ASSIST: 5315#ifdef INVARIANTS 5316 mpt_req_not_spcl(mpt, req, "tgt reply TARGET ASSIST", __LINE__); 5317#endif 5318 mpt_prt(mpt, "target assist completion\n"); 5319 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 5320 mpt_free_request(mpt, req); 5321 break; 5322 case MPI_FUNCTION_TARGET_STATUS_SEND: 5323#ifdef INVARIANTS 5324 mpt_req_not_spcl(mpt, req, "tgt reply STATUS SEND", __LINE__); 5325#endif 5326 mpt_prt(mpt, "status send completion\n"); 5327 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 5328 mpt_free_request(mpt, req); 5329 break; 5330 case MPI_FUNCTION_TARGET_MODE_ABORT: 5331 { 5332 PTR_MSG_TARGET_MODE_ABORT_REPLY abtrp = 5333 (PTR_MSG_TARGET_MODE_ABORT_REPLY) reply_frame; 5334 PTR_MSG_TARGET_MODE_ABORT abtp = 5335 (PTR_MSG_TARGET_MODE_ABORT) req->req_vbuf; 5336 uint32_t cc = GET_IO_INDEX(le32toh(abtp->ReplyWord)); 5337#ifdef INVARIANTS 5338 mpt_req_not_spcl(mpt, req, "tgt reply TMODE ABORT", __LINE__); 5339#endif 5340 mpt_prt(mpt, "ABORT RX_ID 0x%x Complete; status 0x%x cnt %u\n", 5341 cc, le16toh(abtrp->IOCStatus), le32toh(abtrp->AbortCount)); 5342 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 5343 mpt_free_request(mpt, req); 5344 break; 5345 } 5346 default: 5347 mpt_prt(mpt, "Unknown Target Address Reply Function code: " 5348 "0x%x\n", reply_frame->Function); 5349 break; 5350 } 5351 return (TRUE); 5352} 5353