1/*- 2 * Copyright (c) 2013 LSI Corp. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the author nor the names of any co-contributors 14 * may be used to endorse or promote products derived from this software 15 * without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * LSI MPT-Fusion Host Adapter FreeBSD 30 * 31 * $FreeBSD$ 32 */ 33 34/* 35 * Copyright (c) 2000-2013 LSI Corporation. 36 * 37 * 38 * Name: mpi2_cnfg.h 39 * Title: MPI Configuration messages and pages 40 * Creation Date: November 10, 2006 41 * 42 * mpi2_cnfg.h Version: 02.00.27 43 * 44 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 45 * prefix are for use only on MPI v2.5 products, and must not be used 46 * with MPI v2.0 products. Unless otherwise noted, names beginning with 47 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 48 * 49 * Version History 50 * --------------- 51 * 52 * Date Version Description 53 * -------- -------- ------------------------------------------------------ 54 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 55 * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. 56 * Added Manufacturing Page 11. 57 * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE 58 * define. 59 * 06-26-07 02.00.02 Adding generic structure for product-specific 60 * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. 61 * Rework of BIOS Page 2 configuration page. 62 * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the 63 * forms. 64 * Added configuration pages IOC Page 8 and Driver 65 * Persistent Mapping Page 0. 66 * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated 67 * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, 68 * RAID Physical Disk Pages 0 and 1, RAID Configuration 69 * Page 0). 70 * Added new value for AccessStatus field of SAS Device 71 * Page 0 (_SATA_NEEDS_INITIALIZATION). 72 * 10-31-07 02.00.04 Added missing SEPDevHandle field to 73 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 74 * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for 75 * NVDATA. 76 * Modified IOC Page 7 to use masks and added field for 77 * SASBroadcastPrimitiveMasks. 78 * Added MPI2_CONFIG_PAGE_BIOS_4. 79 * Added MPI2_CONFIG_PAGE_LOG_0. 80 * 02-29-08 02.00.06 Modified various names to make them 32-character unique. 81 * Added SAS Device IDs. 82 * Updated Integrated RAID configuration pages including 83 * Manufacturing Page 4, IOC Page 6, and RAID Configuration 84 * Page 0. 85 * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. 86 * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. 87 * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. 88 * Added missing MaxNumRoutedSasAddresses field to 89 * MPI2_CONFIG_PAGE_EXPANDER_0. 90 * Added SAS Port Page 0. 91 * Modified structure layout for 92 * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. 93 * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use 94 * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. 95 * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF 96 * to 0x000000FF. 97 * Added two new values for the Physical Disk Coercion Size 98 * bits in the Flags field of Manufacturing Page 4. 99 * Added product-specific Manufacturing pages 16 to 31. 100 * Modified Flags bits for controlling write cache on SATA 101 * drives in IO Unit Page 1. 102 * Added new bit to AdditionalControlFlags of SAS IO Unit 103 * Page 1 to control Invalid Topology Correction. 104 * Added additional defines for RAID Volume Page 0 105 * VolumeStatusFlags field. 106 * Modified meaning of RAID Volume Page 0 VolumeSettings 107 * define for auto-configure of hot-swap drives. 108 * Added SupportedPhysDisks field to RAID Volume Page 1 and 109 * added related defines. 110 * Added PhysDiskAttributes field (and related defines) to 111 * RAID Physical Disk Page 0. 112 * Added MPI2_SAS_PHYINFO_PHY_VACANT define. 113 * Added three new DiscoveryStatus bits for SAS IO Unit 114 * Page 0 and SAS Expander Page 0. 115 * Removed multiplexing information from SAS IO Unit pages. 116 * Added BootDeviceWaitTime field to SAS IO Unit Page 4. 117 * Removed Zone Address Resolved bit from PhyInfo and from 118 * Expander Page 0 Flags field. 119 * Added two new AccessStatus values to SAS Device Page 0 120 * for indicating routing problems. Added 3 reserved words 121 * to this page. 122 * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. 123 * Inserted missing reserved field into structure for IOC 124 * Page 6. 125 * Added more pending task bits to RAID Volume Page 0 126 * VolumeStatusFlags defines. 127 * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. 128 * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 129 * and SAS Expander Page 0 to flag a downstream initiator 130 * when in simplified routing mode. 131 * Removed SATA Init Failure defines for DiscoveryStatus 132 * fields of SAS IO Unit Page 0 and SAS Expander Page 0. 133 * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. 134 * Added PortGroups, DmaGroup, and ControlGroup fields to 135 * SAS Device Page 0. 136 * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO 137 * Unit Page 6. 138 * Added expander reduced functionality data to SAS 139 * Expander Page 0. 140 * Added SAS PHY Page 2 and SAS PHY Page 3. 141 * 07-30-09 02.00.12 Added IO Unit Page 7. 142 * Added new device ids. 143 * Added SAS IO Unit Page 5. 144 * Added partial and slumber power management capable flags 145 * to SAS Device Page 0 Flags field. 146 * Added PhyInfo defines for power condition. 147 * Added Ethernet configuration pages. 148 * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. 149 * Added SAS PHY Page 4 structure and defines. 150 * 02-10-10 02.00.14 Modified the comments for the configuration page 151 * structures that contain an array of data. The host 152 * should use the "count" field in the page data (e.g. the 153 * NumPhys field) to determine the number of valid elements 154 * in the array. 155 * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. 156 * Added PowerManagementCapabilities to IO Unit Page 7. 157 * Added PortWidthModGroup field to 158 * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. 159 * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. 160 * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. 161 * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. 162 * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT 163 * define. 164 * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. 165 * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. 166 * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) 167 * defines. 168 * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to 169 * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for 170 * the Pinout field. 171 * Added BoardTemperature and BoardTemperatureUnits fields 172 * to MPI2_CONFIG_PAGE_IO_UNIT_7. 173 * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define 174 * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. 175 * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. 176 * Added IO Unit Page 8, IO Unit Page 9, 177 * and IO Unit Page 10. 178 * Added SASNotifyPrimitiveMasks field to 179 * MPI2_CONFIG_PAGE_IOC_7. 180 * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). 181 * 05-25-11 02.00.20 Cleaned up a few comments. 182 * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities 183 * for PCIe link as obsolete. 184 * Added SpinupFlags field containing a Disable Spin-up bit 185 * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO 186 * Unit Page 4. 187 * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. 188 * Added UEFIVersion field to BIOS Page 1 and defined new 189 * BiosOptions bits. 190 * Incorporating additions for MPI v2.5. 191 * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. 192 * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. 193 * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as 194 * obsolete for MPI v2.5 and later. 195 * Added some defines for 12G SAS speeds. 196 * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. 197 * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to 198 * match the specification. 199 * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for 200 * future use. 201 * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for 202 * MPI2_CONFIG_PAGE_MAN_7. 203 * Added EnclosureLevel and ConnectorName fields to 204 * MPI2_CONFIG_PAGE_SAS_DEV_0. 205 * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for 206 * MPI2_CONFIG_PAGE_SAS_DEV_0. 207 * Added EnclosureLevel field to 208 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 209 * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for 210 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 211 * -------------------------------------------------------------------------- 212 */ 213 214#ifndef MPI2_CNFG_H 215#define MPI2_CNFG_H 216 217/***************************************************************************** 218* Configuration Page Header and defines 219*****************************************************************************/ 220 221/* Config Page Header */ 222typedef struct _MPI2_CONFIG_PAGE_HEADER 223{ 224 U8 PageVersion; /* 0x00 */ 225 U8 PageLength; /* 0x01 */ 226 U8 PageNumber; /* 0x02 */ 227 U8 PageType; /* 0x03 */ 228} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER, 229 Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t; 230 231typedef union _MPI2_CONFIG_PAGE_HEADER_UNION 232{ 233 MPI2_CONFIG_PAGE_HEADER Struct; 234 U8 Bytes[4]; 235 U16 Word16[2]; 236 U32 Word32; 237} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION, 238 Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion; 239 240/* Extended Config Page Header */ 241typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER 242{ 243 U8 PageVersion; /* 0x00 */ 244 U8 Reserved1; /* 0x01 */ 245 U8 PageNumber; /* 0x02 */ 246 U8 PageType; /* 0x03 */ 247 U16 ExtPageLength; /* 0x04 */ 248 U8 ExtPageType; /* 0x06 */ 249 U8 Reserved2; /* 0x07 */ 250} MPI2_CONFIG_EXTENDED_PAGE_HEADER, 251 MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, 252 Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t; 253 254typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION 255{ 256 MPI2_CONFIG_PAGE_HEADER Struct; 257 MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; 258 U8 Bytes[8]; 259 U16 Word16[4]; 260 U32 Word32[2]; 261} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, 262 Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion; 263 264 265/* PageType field values */ 266#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) 267#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) 268#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) 269#define MPI2_CONFIG_PAGEATTR_MASK (0xF0) 270 271#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) 272#define MPI2_CONFIG_PAGETYPE_IOC (0x01) 273#define MPI2_CONFIG_PAGETYPE_BIOS (0x02) 274#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) 275#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) 276#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) 277#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) 278#define MPI2_CONFIG_PAGETYPE_MASK (0x0F) 279 280#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) 281 282 283/* ExtPageType field values */ 284#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) 285#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) 286#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) 287#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) 288#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) 289#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) 290#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) 291#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) 292#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) 293#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) 294#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) 295 296 297/***************************************************************************** 298* PageAddress defines 299*****************************************************************************/ 300 301/* RAID Volume PageAddress format */ 302#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) 303#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 304#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) 305 306#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) 307 308 309/* RAID Physical Disk PageAddress format */ 310#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) 311#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) 312#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) 313#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) 314 315#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) 316#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) 317 318 319/* SAS Expander PageAddress format */ 320#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) 321#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) 322#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) 323#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) 324 325#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) 326#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) 327#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) 328 329 330/* SAS Device PageAddress format */ 331#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) 332#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 333#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) 334 335#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) 336 337 338/* SAS PHY PageAddress format */ 339#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) 340#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) 341#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) 342 343#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) 344#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) 345 346 347/* SAS Port PageAddress format */ 348#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) 349#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) 350#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) 351 352#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) 353 354 355/* SAS Enclosure PageAddress format */ 356#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) 357#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 358#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) 359 360#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) 361 362 363/* RAID Configuration PageAddress format */ 364#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) 365#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) 366#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) 367#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) 368 369#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) 370 371 372/* Driver Persistent Mapping PageAddress format */ 373#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) 374#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) 375 376#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) 377#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) 378#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) 379 380 381/* Ethernet PageAddress format */ 382#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000) 383#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000) 384 385#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) 386 387 388 389/**************************************************************************** 390* Configuration messages 391****************************************************************************/ 392 393/* Configuration Request Message */ 394typedef struct _MPI2_CONFIG_REQUEST 395{ 396 U8 Action; /* 0x00 */ 397 U8 SGLFlags; /* 0x01 */ 398 U8 ChainOffset; /* 0x02 */ 399 U8 Function; /* 0x03 */ 400 U16 ExtPageLength; /* 0x04 */ 401 U8 ExtPageType; /* 0x06 */ 402 U8 MsgFlags; /* 0x07 */ 403 U8 VP_ID; /* 0x08 */ 404 U8 VF_ID; /* 0x09 */ 405 U16 Reserved1; /* 0x0A */ 406 U8 Reserved2; /* 0x0C */ 407 U8 ProxyVF_ID; /* 0x0D */ 408 U16 Reserved4; /* 0x0E */ 409 U32 Reserved3; /* 0x10 */ 410 MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ 411 U32 PageAddress; /* 0x18 */ 412 MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */ 413} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST, 414 Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t; 415 416/* values for the Action field */ 417#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) 418#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) 419#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) 420#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) 421#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) 422#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) 423#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) 424#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) 425 426/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ 427 428 429/* Config Reply Message */ 430typedef struct _MPI2_CONFIG_REPLY 431{ 432 U8 Action; /* 0x00 */ 433 U8 SGLFlags; /* 0x01 */ 434 U8 MsgLength; /* 0x02 */ 435 U8 Function; /* 0x03 */ 436 U16 ExtPageLength; /* 0x04 */ 437 U8 ExtPageType; /* 0x06 */ 438 U8 MsgFlags; /* 0x07 */ 439 U8 VP_ID; /* 0x08 */ 440 U8 VF_ID; /* 0x09 */ 441 U16 Reserved1; /* 0x0A */ 442 U16 Reserved2; /* 0x0C */ 443 U16 IOCStatus; /* 0x0E */ 444 U32 IOCLogInfo; /* 0x10 */ 445 MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ 446} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY, 447 Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t; 448 449 450 451/***************************************************************************** 452* 453* C o n f i g u r a t i o n P a g e s 454* 455*****************************************************************************/ 456 457/**************************************************************************** 458* Manufacturing Config pages 459****************************************************************************/ 460 461#define MPI2_MFGPAGE_VENDORID_LSI (0x1000) 462 463/* MPI v2.0 SAS products */ 464#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) 465#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) 466#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) 467#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) 468#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) 469#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) 470#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) 471 472#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E) 473 474#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080) 475#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081) 476#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082) 477#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) 478#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) 479#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) 480#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) 481#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) 482#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) 483 484/* MPI v2.5 SAS products */ 485#define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096) 486#define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097) 487#define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090) 488#define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091) 489#define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094) 490#define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095) 491 492 493 494 495/* Manufacturing Page 0 */ 496 497typedef struct _MPI2_CONFIG_PAGE_MAN_0 498{ 499 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 500 U8 ChipName[16]; /* 0x04 */ 501 U8 ChipRevision[8]; /* 0x14 */ 502 U8 BoardName[16]; /* 0x1C */ 503 U8 BoardAssembly[16]; /* 0x2C */ 504 U8 BoardTracerNumber[16]; /* 0x3C */ 505} MPI2_CONFIG_PAGE_MAN_0, 506 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0, 507 Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t; 508 509#define MPI2_MANUFACTURING0_PAGEVERSION (0x00) 510 511 512/* Manufacturing Page 1 */ 513 514typedef struct _MPI2_CONFIG_PAGE_MAN_1 515{ 516 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 517 U8 VPD[256]; /* 0x04 */ 518} MPI2_CONFIG_PAGE_MAN_1, 519 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1, 520 Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t; 521 522#define MPI2_MANUFACTURING1_PAGEVERSION (0x00) 523 524 525typedef struct _MPI2_CHIP_REVISION_ID 526{ 527 U16 DeviceID; /* 0x00 */ 528 U8 PCIRevisionID; /* 0x02 */ 529 U8 Reserved; /* 0x03 */ 530} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID, 531 Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t; 532 533 534/* Manufacturing Page 2 */ 535 536/* 537 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 538 * one and check Header.PageLength at runtime. 539 */ 540#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS 541#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) 542#endif 543 544typedef struct _MPI2_CONFIG_PAGE_MAN_2 545{ 546 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 547 MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ 548 U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */ 549} MPI2_CONFIG_PAGE_MAN_2, 550 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2, 551 Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t; 552 553#define MPI2_MANUFACTURING2_PAGEVERSION (0x00) 554 555 556/* Manufacturing Page 3 */ 557 558/* 559 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 560 * one and check Header.PageLength at runtime. 561 */ 562#ifndef MPI2_MAN_PAGE_3_INFO_WORDS 563#define MPI2_MAN_PAGE_3_INFO_WORDS (1) 564#endif 565 566typedef struct _MPI2_CONFIG_PAGE_MAN_3 567{ 568 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 569 MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ 570 U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */ 571} MPI2_CONFIG_PAGE_MAN_3, 572 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3, 573 Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t; 574 575#define MPI2_MANUFACTURING3_PAGEVERSION (0x00) 576 577 578/* Manufacturing Page 4 */ 579 580typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS 581{ 582 U8 PowerSaveFlags; /* 0x00 */ 583 U8 InternalOperationsSleepTime; /* 0x01 */ 584 U8 InternalOperationsRunTime; /* 0x02 */ 585 U8 HostIdleTime; /* 0x03 */ 586} MPI2_MANPAGE4_PWR_SAVE_SETTINGS, 587 MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, 588 Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t; 589 590/* defines for the PowerSaveFlags field */ 591#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) 592#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) 593#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) 594#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) 595 596typedef struct _MPI2_CONFIG_PAGE_MAN_4 597{ 598 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 599 U32 Reserved1; /* 0x04 */ 600 U32 Flags; /* 0x08 */ 601 U8 InquirySize; /* 0x0C */ 602 U8 Reserved2; /* 0x0D */ 603 U16 Reserved3; /* 0x0E */ 604 U8 InquiryData[56]; /* 0x10 */ 605 U32 RAID0VolumeSettings; /* 0x48 */ 606 U32 RAID1EVolumeSettings; /* 0x4C */ 607 U32 RAID1VolumeSettings; /* 0x50 */ 608 U32 RAID10VolumeSettings; /* 0x54 */ 609 U32 Reserved4; /* 0x58 */ 610 U32 Reserved5; /* 0x5C */ 611 MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */ 612 U8 MaxOCEDisks; /* 0x64 */ 613 U8 ResyncRate; /* 0x65 */ 614 U16 DataScrubDuration; /* 0x66 */ 615 U8 MaxHotSpares; /* 0x68 */ 616 U8 MaxPhysDisksPerVol; /* 0x69 */ 617 U8 MaxPhysDisks; /* 0x6A */ 618 U8 MaxVolumes; /* 0x6B */ 619} MPI2_CONFIG_PAGE_MAN_4, 620 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4, 621 Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t; 622 623#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) 624 625/* Manufacturing Page 4 Flags field */ 626#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) 627#define MPI2_MANPAGE4_METADATA_512MB (0x00000000) 628 629#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) 630#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) 631#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) 632 633#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) 634#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) 635#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) 636#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) 637#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) 638 639#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) 640#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) 641#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) 642#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) 643 644#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) 645#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) 646#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) 647#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) 648#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) 649#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) 650#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) 651#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) 652 653 654/* Manufacturing Page 5 */ 655 656/* 657 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 658 * one and check the value returned for NumPhys at runtime. 659 */ 660#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES 661#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) 662#endif 663 664typedef struct _MPI2_MANUFACTURING5_ENTRY 665{ 666 U64 WWID; /* 0x00 */ 667 U64 DeviceName; /* 0x08 */ 668} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY, 669 Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t; 670 671typedef struct _MPI2_CONFIG_PAGE_MAN_5 672{ 673 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 674 U8 NumPhys; /* 0x04 */ 675 U8 Reserved1; /* 0x05 */ 676 U16 Reserved2; /* 0x06 */ 677 U32 Reserved3; /* 0x08 */ 678 U32 Reserved4; /* 0x0C */ 679 MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */ 680} MPI2_CONFIG_PAGE_MAN_5, 681 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5, 682 Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t; 683 684#define MPI2_MANUFACTURING5_PAGEVERSION (0x03) 685 686 687/* Manufacturing Page 6 */ 688 689typedef struct _MPI2_CONFIG_PAGE_MAN_6 690{ 691 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 692 U32 ProductSpecificInfo;/* 0x04 */ 693} MPI2_CONFIG_PAGE_MAN_6, 694 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6, 695 Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t; 696 697#define MPI2_MANUFACTURING6_PAGEVERSION (0x00) 698 699 700/* Manufacturing Page 7 */ 701 702typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO 703{ 704 U32 Pinout; /* 0x00 */ 705 U8 Connector[16]; /* 0x04 */ 706 U8 Location; /* 0x14 */ 707 U8 ReceptacleID; /* 0x15 */ 708 U16 Slot; /* 0x16 */ 709 U32 Reserved2; /* 0x18 */ 710} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO, 711 Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t; 712 713/* defines for the Pinout field */ 714#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00) 715#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8) 716 717#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF) 718#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00) 719#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01) 720#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02) 721#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03) 722#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04) 723#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05) 724#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06) 725#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07) 726#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08) 727#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09) 728#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A) 729#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) 730#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) 731#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) 732 733/* defines for the Location field */ 734#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) 735#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) 736#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) 737#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) 738#define MPI2_MANPAGE7_LOCATION_AUTO (0x10) 739#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) 740#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) 741 742/* 743 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 744 * one and check the value returned for NumPhys at runtime. 745 */ 746#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX 747#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) 748#endif 749 750typedef struct _MPI2_CONFIG_PAGE_MAN_7 751{ 752 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 753 U32 Reserved1; /* 0x04 */ 754 U32 Reserved2; /* 0x08 */ 755 U32 Flags; /* 0x0C */ 756 U8 EnclosureName[16]; /* 0x10 */ 757 U8 NumPhys; /* 0x20 */ 758 U8 Reserved3; /* 0x21 */ 759 U16 Reserved4; /* 0x22 */ 760 MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */ 761} MPI2_CONFIG_PAGE_MAN_7, 762 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7, 763 Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t; 764 765#define MPI2_MANUFACTURING7_PAGEVERSION (0x01) 766 767/* defines for the Flags field */ 768#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008) 769#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) 770#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) 771 772 773/* 774 * Generic structure to use for product-specific manufacturing pages 775 * (currently Manufacturing Page 8 through Manufacturing Page 31). 776 */ 777 778typedef struct _MPI2_CONFIG_PAGE_MAN_PS 779{ 780 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 781 U32 ProductSpecificInfo;/* 0x04 */ 782} MPI2_CONFIG_PAGE_MAN_PS, 783 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS, 784 Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t; 785 786#define MPI2_MANUFACTURING8_PAGEVERSION (0x00) 787#define MPI2_MANUFACTURING9_PAGEVERSION (0x00) 788#define MPI2_MANUFACTURING10_PAGEVERSION (0x00) 789#define MPI2_MANUFACTURING11_PAGEVERSION (0x00) 790#define MPI2_MANUFACTURING12_PAGEVERSION (0x00) 791#define MPI2_MANUFACTURING13_PAGEVERSION (0x00) 792#define MPI2_MANUFACTURING14_PAGEVERSION (0x00) 793#define MPI2_MANUFACTURING15_PAGEVERSION (0x00) 794#define MPI2_MANUFACTURING16_PAGEVERSION (0x00) 795#define MPI2_MANUFACTURING17_PAGEVERSION (0x00) 796#define MPI2_MANUFACTURING18_PAGEVERSION (0x00) 797#define MPI2_MANUFACTURING19_PAGEVERSION (0x00) 798#define MPI2_MANUFACTURING20_PAGEVERSION (0x00) 799#define MPI2_MANUFACTURING21_PAGEVERSION (0x00) 800#define MPI2_MANUFACTURING22_PAGEVERSION (0x00) 801#define MPI2_MANUFACTURING23_PAGEVERSION (0x00) 802#define MPI2_MANUFACTURING24_PAGEVERSION (0x00) 803#define MPI2_MANUFACTURING25_PAGEVERSION (0x00) 804#define MPI2_MANUFACTURING26_PAGEVERSION (0x00) 805#define MPI2_MANUFACTURING27_PAGEVERSION (0x00) 806#define MPI2_MANUFACTURING28_PAGEVERSION (0x00) 807#define MPI2_MANUFACTURING29_PAGEVERSION (0x00) 808#define MPI2_MANUFACTURING30_PAGEVERSION (0x00) 809#define MPI2_MANUFACTURING31_PAGEVERSION (0x00) 810 811 812/**************************************************************************** 813* IO Unit Config Pages 814****************************************************************************/ 815 816/* IO Unit Page 0 */ 817 818typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 819{ 820 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 821 U64 UniqueValue; /* 0x04 */ 822 MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */ 823 MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */ 824} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, 825 Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t; 826 827#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) 828 829 830/* IO Unit Page 1 */ 831 832typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 833{ 834 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 835 U32 Flags; /* 0x04 */ 836} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, 837 Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t; 838 839#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) 840 841/* IO Unit Page 1 Flags defines */ 842#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000) 843#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000) 844#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000) 845#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800) 846#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) 847#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9) 848#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) 849#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) 850#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) 851#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) 852#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) 853#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) 854#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) 855 856 857/* IO Unit Page 3 */ 858 859/* 860 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 861 * one and check the value returned for GPIOCount at runtime. 862 */ 863#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX 864#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) 865#endif 866 867typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 868{ 869 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 870 U8 GPIOCount; /* 0x04 */ 871 U8 Reserved1; /* 0x05 */ 872 U16 Reserved2; /* 0x06 */ 873 U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */ 874} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, 875 Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t; 876 877#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) 878 879/* defines for IO Unit Page 3 GPIOVal field */ 880#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) 881#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) 882#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) 883#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) 884 885 886/* IO Unit Page 5 */ 887 888/* 889 * Upper layer code (drivers, utilities, etc.) should leave this define set to 890 * one and check the value returned for NumDmaEngines at runtime. 891 */ 892#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES 893#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) 894#endif 895 896typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 897{ 898 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 899 U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */ 900 U64 RaidAcceleratorBufferSize; /* 0x0C */ 901 U64 RaidAcceleratorControlBaseAddress; /* 0x14 */ 902 U8 RAControlSize; /* 0x1C */ 903 U8 NumDmaEngines; /* 0x1D */ 904 U8 RAMinControlSize; /* 0x1E */ 905 U8 RAMaxControlSize; /* 0x1F */ 906 U32 Reserved1; /* 0x20 */ 907 U32 Reserved2; /* 0x24 */ 908 U32 Reserved3; /* 0x28 */ 909 U32 DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */ 910} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, 911 Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t; 912 913#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) 914 915/* defines for IO Unit Page 5 DmaEngineCapabilities field */ 916#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000) 917#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) 918 919#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) 920#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004) 921#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002) 922#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001) 923 924 925/* IO Unit Page 6 */ 926 927typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 928{ 929 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 930 U16 Flags; /* 0x04 */ 931 U8 RAHostControlSize; /* 0x06 */ 932 U8 Reserved0; /* 0x07 */ 933 U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */ 934 U32 Reserved1; /* 0x10 */ 935 U32 Reserved2; /* 0x14 */ 936 U32 Reserved3; /* 0x18 */ 937} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6, 938 Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t; 939 940#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00) 941 942/* defines for IO Unit Page 6 Flags field */ 943#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) 944 945 946/* IO Unit Page 7 */ 947 948typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 949{ 950 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 951 U8 CurrentPowerMode; /* 0x04 */ /* reserved in MPI 2.0 */ 952 U8 PreviousPowerMode; /* 0x05 */ /* reserved in MPI 2.0 */ 953 U8 PCIeWidth; /* 0x06 */ 954 U8 PCIeSpeed; /* 0x07 */ 955 U32 ProcessorState; /* 0x08 */ 956 U32 PowerManagementCapabilities; /* 0x0C */ 957 U16 IOCTemperature; /* 0x10 */ 958 U8 IOCTemperatureUnits; /* 0x12 */ 959 U8 IOCSpeed; /* 0x13 */ 960 U16 BoardTemperature; /* 0x14 */ 961 U8 BoardTemperatureUnits; /* 0x16 */ 962 U8 Reserved3; /* 0x17 */ 963 U32 Reserved4; /* 0x18 */ 964 U32 Reserved5; /* 0x1C */ 965 U32 Reserved6; /* 0x20 */ 966 U32 Reserved7; /* 0x24 */ 967} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, 968 Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t; 969 970#define MPI2_IOUNITPAGE7_PAGEVERSION (0x04) 971 972/* defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */ 973#define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0) 974#define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00) 975#define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40) 976#define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80) 977#define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0) 978 979#define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07) 980#define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00) 981#define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01) 982#define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04) 983#define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05) 984#define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06) 985 986 987/* defines for IO Unit Page 7 PCIeWidth field */ 988#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) 989#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) 990#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) 991#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) 992 993/* defines for IO Unit Page 7 PCIeSpeed field */ 994#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) 995#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) 996#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) 997 998/* defines for IO Unit Page 7 ProcessorState field */ 999#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) 1000#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0) 1001 1002#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00) 1003#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) 1004#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) 1005 1006/* defines for IO Unit Page 7 PowerManagementCapabilities field */ 1007#define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000) 1008#define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000) 1009#define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000) 1010#define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000) 1011#define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000) 1012#define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000) 1013#define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000) 1014#define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000) 1015#define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000) 1016#define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400) 1017#define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200) 1018#define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100) 1019#define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040) 1020#define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020) 1021#define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010) 1022#define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008) /* obsolete */ 1023#define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004) /* obsolete */ 1024#define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002) /* obsolete */ 1025#define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001) /* obsolete */ 1026 1027/* obsolete names for the PowerManagementCapabilities bits (above) */ 1028#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) 1029#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) 1030#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) 1031#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /* obsolete */ 1032#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /* obsolete */ 1033 1034 1035/* defines for IO Unit Page 7 IOCTemperatureUnits field */ 1036#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) 1037#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) 1038#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02) 1039 1040/* defines for IO Unit Page 7 IOCSpeed field */ 1041#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01) 1042#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02) 1043#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04) 1044#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08) 1045 1046/* defines for IO Unit Page 7 BoardTemperatureUnits field */ 1047#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00) 1048#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) 1049#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) 1050 1051 1052/* IO Unit Page 8 */ 1053 1054#define MPI2_IOUNIT8_NUM_THRESHOLDS (4) 1055 1056typedef struct _MPI2_IOUNIT8_SENSOR 1057{ 1058 U16 Flags; /* 0x00 */ 1059 U16 Reserved1; /* 0x02 */ 1060 U16 Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */ 1061 U32 Reserved2; /* 0x0C */ 1062 U32 Reserved3; /* 0x10 */ 1063 U32 Reserved4; /* 0x14 */ 1064} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR, 1065 Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t; 1066 1067/* defines for IO Unit Page 8 Sensor Flags field */ 1068#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008) 1069#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004) 1070#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002) 1071#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) 1072 1073/* 1074 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1075 * one and check the value returned for NumSensors at runtime. 1076 */ 1077#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES 1078#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) 1079#endif 1080 1081typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 1082{ 1083 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1084 U32 Reserved1; /* 0x04 */ 1085 U32 Reserved2; /* 0x08 */ 1086 U8 NumSensors; /* 0x0C */ 1087 U8 PollingInterval; /* 0x0D */ 1088 U16 Reserved3; /* 0x0E */ 1089 MPI2_IOUNIT8_SENSOR Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */ 1090} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, 1091 Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t; 1092 1093#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00) 1094 1095 1096/* IO Unit Page 9 */ 1097 1098typedef struct _MPI2_IOUNIT9_SENSOR 1099{ 1100 U16 CurrentTemperature; /* 0x00 */ 1101 U16 Reserved1; /* 0x02 */ 1102 U8 Flags; /* 0x04 */ 1103 U8 Reserved2; /* 0x05 */ 1104 U16 Reserved3; /* 0x06 */ 1105 U32 Reserved4; /* 0x08 */ 1106 U32 Reserved5; /* 0x0C */ 1107} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR, 1108 Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t; 1109 1110/* defines for IO Unit Page 9 Sensor Flags field */ 1111#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) 1112 1113/* 1114 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1115 * one and check the value returned for NumSensors at runtime. 1116 */ 1117#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES 1118#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) 1119#endif 1120 1121typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 1122{ 1123 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1124 U32 Reserved1; /* 0x04 */ 1125 U32 Reserved2; /* 0x08 */ 1126 U8 NumSensors; /* 0x0C */ 1127 U8 Reserved4; /* 0x0D */ 1128 U16 Reserved3; /* 0x0E */ 1129 MPI2_IOUNIT9_SENSOR Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */ 1130} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, 1131 Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t; 1132 1133#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00) 1134 1135 1136/* IO Unit Page 10 */ 1137 1138typedef struct _MPI2_IOUNIT10_FUNCTION 1139{ 1140 U8 CreditPercent; /* 0x00 */ 1141 U8 Reserved1; /* 0x01 */ 1142 U16 Reserved2; /* 0x02 */ 1143} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION, 1144 Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t; 1145 1146/* 1147 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1148 * one and check the value returned for NumFunctions at runtime. 1149 */ 1150#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES 1151#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) 1152#endif 1153 1154typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 1155{ 1156 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1157 U8 NumFunctions; /* 0x04 */ 1158 U8 Reserved1; /* 0x05 */ 1159 U16 Reserved2; /* 0x06 */ 1160 U32 Reserved3; /* 0x08 */ 1161 U32 Reserved4; /* 0x0C */ 1162 MPI2_IOUNIT10_FUNCTION Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES]; /* 0x10 */ 1163} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, 1164 Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t; 1165 1166#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) 1167 1168 1169 1170/**************************************************************************** 1171* IOC Config Pages 1172****************************************************************************/ 1173 1174/* IOC Page 0 */ 1175 1176typedef struct _MPI2_CONFIG_PAGE_IOC_0 1177{ 1178 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1179 U32 Reserved1; /* 0x04 */ 1180 U32 Reserved2; /* 0x08 */ 1181 U16 VendorID; /* 0x0C */ 1182 U16 DeviceID; /* 0x0E */ 1183 U8 RevisionID; /* 0x10 */ 1184 U8 Reserved3; /* 0x11 */ 1185 U16 Reserved4; /* 0x12 */ 1186 U32 ClassCode; /* 0x14 */ 1187 U16 SubsystemVendorID; /* 0x18 */ 1188 U16 SubsystemID; /* 0x1A */ 1189} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0, 1190 Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t; 1191 1192#define MPI2_IOCPAGE0_PAGEVERSION (0x02) 1193 1194 1195/* IOC Page 1 */ 1196 1197typedef struct _MPI2_CONFIG_PAGE_IOC_1 1198{ 1199 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1200 U32 Flags; /* 0x04 */ 1201 U32 CoalescingTimeout; /* 0x08 */ 1202 U8 CoalescingDepth; /* 0x0C */ 1203 U8 PCISlotNum; /* 0x0D */ 1204 U8 PCIBusNum; /* 0x0E */ 1205 U8 PCIDomainSegment; /* 0x0F */ 1206 U32 Reserved1; /* 0x10 */ 1207 U32 Reserved2; /* 0x14 */ 1208} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1, 1209 Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t; 1210 1211#define MPI2_IOCPAGE1_PAGEVERSION (0x05) 1212 1213/* defines for IOC Page 1 Flags field */ 1214#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) 1215 1216#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) 1217#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) 1218#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) 1219 1220/* IOC Page 6 */ 1221 1222typedef struct _MPI2_CONFIG_PAGE_IOC_6 1223{ 1224 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1225 U32 CapabilitiesFlags; /* 0x04 */ 1226 U8 MaxDrivesRAID0; /* 0x08 */ 1227 U8 MaxDrivesRAID1; /* 0x09 */ 1228 U8 MaxDrivesRAID1E; /* 0x0A */ 1229 U8 MaxDrivesRAID10; /* 0x0B */ 1230 U8 MinDrivesRAID0; /* 0x0C */ 1231 U8 MinDrivesRAID1; /* 0x0D */ 1232 U8 MinDrivesRAID1E; /* 0x0E */ 1233 U8 MinDrivesRAID10; /* 0x0F */ 1234 U32 Reserved1; /* 0x10 */ 1235 U8 MaxGlobalHotSpares; /* 0x14 */ 1236 U8 MaxPhysDisks; /* 0x15 */ 1237 U8 MaxVolumes; /* 0x16 */ 1238 U8 MaxConfigs; /* 0x17 */ 1239 U8 MaxOCEDisks; /* 0x18 */ 1240 U8 Reserved2; /* 0x19 */ 1241 U16 Reserved3; /* 0x1A */ 1242 U32 SupportedStripeSizeMapRAID0; /* 0x1C */ 1243 U32 SupportedStripeSizeMapRAID1E; /* 0x20 */ 1244 U32 SupportedStripeSizeMapRAID10; /* 0x24 */ 1245 U32 Reserved4; /* 0x28 */ 1246 U32 Reserved5; /* 0x2C */ 1247 U16 DefaultMetadataSize; /* 0x30 */ 1248 U16 Reserved6; /* 0x32 */ 1249 U16 MaxBadBlockTableEntries; /* 0x34 */ 1250 U16 Reserved7; /* 0x36 */ 1251 U32 IRNvsramVersion; /* 0x38 */ 1252} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6, 1253 Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t; 1254 1255#define MPI2_IOCPAGE6_PAGEVERSION (0x05) 1256 1257/* defines for IOC Page 6 CapabilitiesFlags */ 1258#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020) 1259#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) 1260#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) 1261#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) 1262#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) 1263#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) 1264 1265 1266/* IOC Page 7 */ 1267 1268#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) 1269 1270typedef struct _MPI2_CONFIG_PAGE_IOC_7 1271{ 1272 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1273 U32 Reserved1; /* 0x04 */ 1274 U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ 1275 U16 SASBroadcastPrimitiveMasks; /* 0x18 */ 1276 U16 SASNotifyPrimitiveMasks; /* 0x1A */ 1277 U32 Reserved3; /* 0x1C */ 1278} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, 1279 Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; 1280 1281#define MPI2_IOCPAGE7_PAGEVERSION (0x02) 1282 1283 1284/* IOC Page 8 */ 1285 1286typedef struct _MPI2_CONFIG_PAGE_IOC_8 1287{ 1288 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1289 U8 NumDevsPerEnclosure; /* 0x04 */ 1290 U8 Reserved1; /* 0x05 */ 1291 U16 Reserved2; /* 0x06 */ 1292 U16 MaxPersistentEntries; /* 0x08 */ 1293 U16 MaxNumPhysicalMappedIDs; /* 0x0A */ 1294 U16 Flags; /* 0x0C */ 1295 U16 Reserved3; /* 0x0E */ 1296 U16 IRVolumeMappingFlags; /* 0x10 */ 1297 U16 Reserved4; /* 0x12 */ 1298 U32 Reserved5; /* 0x14 */ 1299} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8, 1300 Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t; 1301 1302#define MPI2_IOCPAGE8_PAGEVERSION (0x00) 1303 1304/* defines for IOC Page 8 Flags field */ 1305#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) 1306#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) 1307 1308#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) 1309#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) 1310#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) 1311 1312#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) 1313#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) 1314 1315/* defines for IOC Page 8 IRVolumeMappingFlags */ 1316#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) 1317#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) 1318#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) 1319 1320 1321/**************************************************************************** 1322* BIOS Config Pages 1323****************************************************************************/ 1324 1325/* BIOS Page 1 */ 1326 1327typedef struct _MPI2_CONFIG_PAGE_BIOS_1 1328{ 1329 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1330 U32 BiosOptions; /* 0x04 */ 1331 U32 IOCSettings; /* 0x08 */ 1332 U32 Reserved1; /* 0x0C */ 1333 U32 DeviceSettings; /* 0x10 */ 1334 U16 NumberOfDevices; /* 0x14 */ 1335 U16 UEFIVersion; /* 0x16 */ 1336 U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ 1337 U16 IOTimeoutSequential; /* 0x1A */ 1338 U16 IOTimeoutOther; /* 0x1C */ 1339 U16 IOTimeoutBlockDevicesRM; /* 0x1E */ 1340} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, 1341 Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; 1342 1343#define MPI2_BIOSPAGE1_PAGEVERSION (0x05) 1344 1345/* values for BIOS Page 1 BiosOptions field */ 1346#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) 1347#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) 1348 1349#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) 1350#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) 1351#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) 1352#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) 1353 1354#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) 1355 1356/* values for BIOS Page 1 IOCSettings field */ 1357#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) 1358#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) 1359#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) 1360 1361#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) 1362#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) 1363#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) 1364#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) 1365 1366#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) 1367#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) 1368#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) 1369#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) 1370#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) 1371 1372#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) 1373 1374/* values for BIOS Page 1 DeviceSettings field */ 1375#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) 1376#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) 1377#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) 1378#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) 1379#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) 1380 1381/* defines for BIOS Page 1 UEFIVersion field */ 1382#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00) 1383#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8) 1384#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF) 1385#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0) 1386 1387 1388 1389/* BIOS Page 2 */ 1390 1391typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER 1392{ 1393 U32 Reserved1; /* 0x00 */ 1394 U32 Reserved2; /* 0x04 */ 1395 U32 Reserved3; /* 0x08 */ 1396 U32 Reserved4; /* 0x0C */ 1397 U32 Reserved5; /* 0x10 */ 1398 U32 Reserved6; /* 0x14 */ 1399} MPI2_BOOT_DEVICE_ADAPTER_ORDER, 1400 MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, 1401 Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t; 1402 1403typedef struct _MPI2_BOOT_DEVICE_SAS_WWID 1404{ 1405 U64 SASAddress; /* 0x00 */ 1406 U8 LUN[8]; /* 0x08 */ 1407 U32 Reserved1; /* 0x10 */ 1408 U32 Reserved2; /* 0x14 */ 1409} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID, 1410 Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t; 1411 1412typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT 1413{ 1414 U64 EnclosureLogicalID; /* 0x00 */ 1415 U32 Reserved1; /* 0x08 */ 1416 U32 Reserved2; /* 0x0C */ 1417 U16 SlotNumber; /* 0x10 */ 1418 U16 Reserved3; /* 0x12 */ 1419 U32 Reserved4; /* 0x14 */ 1420} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, 1421 MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, 1422 Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t; 1423 1424typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME 1425{ 1426 U64 DeviceName; /* 0x00 */ 1427 U8 LUN[8]; /* 0x08 */ 1428 U32 Reserved1; /* 0x10 */ 1429 U32 Reserved2; /* 0x14 */ 1430} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, 1431 Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t; 1432 1433typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE 1434{ 1435 MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; 1436 MPI2_BOOT_DEVICE_SAS_WWID SasWwid; 1437 MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; 1438 MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; 1439} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, 1440 Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t; 1441 1442typedef struct _MPI2_CONFIG_PAGE_BIOS_2 1443{ 1444 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1445 U32 Reserved1; /* 0x04 */ 1446 U32 Reserved2; /* 0x08 */ 1447 U32 Reserved3; /* 0x0C */ 1448 U32 Reserved4; /* 0x10 */ 1449 U32 Reserved5; /* 0x14 */ 1450 U32 Reserved6; /* 0x18 */ 1451 U8 ReqBootDeviceForm; /* 0x1C */ 1452 U8 Reserved7; /* 0x1D */ 1453 U16 Reserved8; /* 0x1E */ 1454 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */ 1455 U8 ReqAltBootDeviceForm; /* 0x38 */ 1456 U8 Reserved9; /* 0x39 */ 1457 U16 Reserved10; /* 0x3A */ 1458 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */ 1459 U8 CurrentBootDeviceForm; /* 0x58 */ 1460 U8 Reserved11; /* 0x59 */ 1461 U16 Reserved12; /* 0x5A */ 1462 MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */ 1463} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2, 1464 Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t; 1465 1466#define MPI2_BIOSPAGE2_PAGEVERSION (0x04) 1467 1468/* values for BIOS Page 2 BootDeviceForm fields */ 1469#define MPI2_BIOSPAGE2_FORM_MASK (0x0F) 1470#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) 1471#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) 1472#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) 1473#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) 1474 1475 1476/* BIOS Page 3 */ 1477 1478typedef struct _MPI2_ADAPTER_INFO 1479{ 1480 U8 PciBusNumber; /* 0x00 */ 1481 U8 PciDeviceAndFunctionNumber; /* 0x01 */ 1482 U16 AdapterFlags; /* 0x02 */ 1483} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO, 1484 Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t; 1485 1486#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) 1487#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) 1488 1489typedef struct _MPI2_CONFIG_PAGE_BIOS_3 1490{ 1491 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1492 U32 GlobalFlags; /* 0x04 */ 1493 U32 BiosVersion; /* 0x08 */ 1494 MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */ 1495 U32 Reserved1; /* 0x1C */ 1496} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3, 1497 Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t; 1498 1499#define MPI2_BIOSPAGE3_PAGEVERSION (0x00) 1500 1501/* values for BIOS Page 3 GlobalFlags */ 1502#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) 1503#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) 1504#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) 1505 1506#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) 1507#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) 1508#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) 1509#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) 1510 1511 1512/* BIOS Page 4 */ 1513 1514/* 1515 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1516 * one and check the value returned for NumPhys at runtime. 1517 */ 1518#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES 1519#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) 1520#endif 1521 1522typedef struct _MPI2_BIOS4_ENTRY 1523{ 1524 U64 ReassignmentWWID; /* 0x00 */ 1525 U64 ReassignmentDeviceName; /* 0x08 */ 1526} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY, 1527 Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t; 1528 1529typedef struct _MPI2_CONFIG_PAGE_BIOS_4 1530{ 1531 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1532 U8 NumPhys; /* 0x04 */ 1533 U8 Reserved1; /* 0x05 */ 1534 U16 Reserved2; /* 0x06 */ 1535 MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */ 1536} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4, 1537 Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t; 1538 1539#define MPI2_BIOSPAGE4_PAGEVERSION (0x01) 1540 1541 1542/**************************************************************************** 1543* RAID Volume Config Pages 1544****************************************************************************/ 1545 1546/* RAID Volume Page 0 */ 1547 1548typedef struct _MPI2_RAIDVOL0_PHYS_DISK 1549{ 1550 U8 RAIDSetNum; /* 0x00 */ 1551 U8 PhysDiskMap; /* 0x01 */ 1552 U8 PhysDiskNum; /* 0x02 */ 1553 U8 Reserved; /* 0x03 */ 1554} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK, 1555 Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t; 1556 1557/* defines for the PhysDiskMap field */ 1558#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) 1559#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) 1560 1561typedef struct _MPI2_RAIDVOL0_SETTINGS 1562{ 1563 U16 Settings; /* 0x00 */ 1564 U8 HotSparePool; /* 0x01 */ 1565 U8 Reserved; /* 0x02 */ 1566} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS, 1567 Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t; 1568 1569/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ 1570#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) 1571#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) 1572#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) 1573#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) 1574#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) 1575#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) 1576#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) 1577#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) 1578 1579/* RAID Volume Page 0 VolumeSettings defines */ 1580#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) 1581#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) 1582 1583#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) 1584#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) 1585#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) 1586#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) 1587 1588/* 1589 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1590 * one and check the value returned for NumPhysDisks at runtime. 1591 */ 1592#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX 1593#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) 1594#endif 1595 1596typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 1597{ 1598 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1599 U16 DevHandle; /* 0x04 */ 1600 U8 VolumeState; /* 0x06 */ 1601 U8 VolumeType; /* 0x07 */ 1602 U32 VolumeStatusFlags; /* 0x08 */ 1603 MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */ 1604 U64 MaxLBA; /* 0x10 */ 1605 U32 StripeSize; /* 0x18 */ 1606 U16 BlockSize; /* 0x1C */ 1607 U16 Reserved1; /* 0x1E */ 1608 U8 SupportedPhysDisks; /* 0x20 */ 1609 U8 ResyncRate; /* 0x21 */ 1610 U16 DataScrubDuration; /* 0x22 */ 1611 U8 NumPhysDisks; /* 0x24 */ 1612 U8 Reserved2; /* 0x25 */ 1613 U8 Reserved3; /* 0x26 */ 1614 U8 InactiveStatus; /* 0x27 */ 1615 MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */ 1616} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, 1617 Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t; 1618 1619#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) 1620 1621/* values for RAID VolumeState */ 1622#define MPI2_RAID_VOL_STATE_MISSING (0x00) 1623#define MPI2_RAID_VOL_STATE_FAILED (0x01) 1624#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) 1625#define MPI2_RAID_VOL_STATE_ONLINE (0x03) 1626#define MPI2_RAID_VOL_STATE_DEGRADED (0x04) 1627#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) 1628 1629/* values for RAID VolumeType */ 1630#define MPI2_RAID_VOL_TYPE_RAID0 (0x00) 1631#define MPI2_RAID_VOL_TYPE_RAID1E (0x01) 1632#define MPI2_RAID_VOL_TYPE_RAID1 (0x02) 1633#define MPI2_RAID_VOL_TYPE_RAID10 (0x05) 1634#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) 1635 1636/* values for RAID Volume Page 0 VolumeStatusFlags field */ 1637#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) 1638#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) 1639#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) 1640#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) 1641#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) 1642#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) 1643#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) 1644#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) 1645#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) 1646#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) 1647#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080) 1648#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) 1649#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) 1650#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) 1651#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) 1652#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) 1653#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) 1654#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) 1655#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) 1656 1657/* values for RAID Volume Page 0 SupportedPhysDisks field */ 1658#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) 1659#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) 1660#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) 1661#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) 1662 1663/* values for RAID Volume Page 0 InactiveStatus field */ 1664#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) 1665#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) 1666#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) 1667#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) 1668#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) 1669#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) 1670#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) 1671 1672 1673/* RAID Volume Page 1 */ 1674 1675typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 1676{ 1677 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1678 U16 DevHandle; /* 0x04 */ 1679 U16 Reserved0; /* 0x06 */ 1680 U8 GUID[24]; /* 0x08 */ 1681 U8 Name[16]; /* 0x20 */ 1682 U64 WWID; /* 0x30 */ 1683 U32 Reserved1; /* 0x38 */ 1684 U32 Reserved2; /* 0x3C */ 1685} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, 1686 Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t; 1687 1688#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) 1689 1690 1691/**************************************************************************** 1692* RAID Physical Disk Config Pages 1693****************************************************************************/ 1694 1695/* RAID Physical Disk Page 0 */ 1696 1697typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS 1698{ 1699 U16 Reserved1; /* 0x00 */ 1700 U8 HotSparePool; /* 0x02 */ 1701 U8 Reserved2; /* 0x03 */ 1702} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS, 1703 Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t; 1704 1705/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ 1706 1707typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA 1708{ 1709 U8 VendorID[8]; /* 0x00 */ 1710 U8 ProductID[16]; /* 0x08 */ 1711 U8 ProductRevLevel[4]; /* 0x18 */ 1712 U8 SerialNum[32]; /* 0x1C */ 1713} MPI2_RAIDPHYSDISK0_INQUIRY_DATA, 1714 MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, 1715 Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t; 1716 1717typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 1718{ 1719 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1720 U16 DevHandle; /* 0x04 */ 1721 U8 Reserved1; /* 0x06 */ 1722 U8 PhysDiskNum; /* 0x07 */ 1723 MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */ 1724 U32 Reserved2; /* 0x0C */ 1725 MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */ 1726 U32 Reserved3; /* 0x4C */ 1727 U8 PhysDiskState; /* 0x50 */ 1728 U8 OfflineReason; /* 0x51 */ 1729 U8 IncompatibleReason; /* 0x52 */ 1730 U8 PhysDiskAttributes; /* 0x53 */ 1731 U32 PhysDiskStatusFlags; /* 0x54 */ 1732 U64 DeviceMaxLBA; /* 0x58 */ 1733 U64 HostMaxLBA; /* 0x60 */ 1734 U64 CoercedMaxLBA; /* 0x68 */ 1735 U16 BlockSize; /* 0x70 */ 1736 U16 Reserved5; /* 0x72 */ 1737 U32 Reserved6; /* 0x74 */ 1738} MPI2_CONFIG_PAGE_RD_PDISK_0, 1739 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, 1740 Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t; 1741 1742#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) 1743 1744/* PhysDiskState defines */ 1745#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) 1746#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) 1747#define MPI2_RAID_PD_STATE_OFFLINE (0x02) 1748#define MPI2_RAID_PD_STATE_ONLINE (0x03) 1749#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) 1750#define MPI2_RAID_PD_STATE_DEGRADED (0x05) 1751#define MPI2_RAID_PD_STATE_REBUILDING (0x06) 1752#define MPI2_RAID_PD_STATE_OPTIMAL (0x07) 1753 1754/* OfflineReason defines */ 1755#define MPI2_PHYSDISK0_ONLINE (0x00) 1756#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) 1757#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) 1758#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) 1759#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) 1760#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) 1761#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) 1762 1763/* IncompatibleReason defines */ 1764#define MPI2_PHYSDISK0_COMPATIBLE (0x00) 1765#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) 1766#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) 1767#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) 1768#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) 1769#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) 1770#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06) 1771#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) 1772 1773/* PhysDiskAttributes defines */ 1774#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C) 1775#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) 1776#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) 1777 1778#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03) 1779#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) 1780#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) 1781 1782/* PhysDiskStatusFlags defines */ 1783#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) 1784#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) 1785#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) 1786#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) 1787#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) 1788#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) 1789#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) 1790#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) 1791 1792 1793/* RAID Physical Disk Page 1 */ 1794 1795/* 1796 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1797 * one and check the value returned for NumPhysDiskPaths at runtime. 1798 */ 1799#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX 1800#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) 1801#endif 1802 1803typedef struct _MPI2_RAIDPHYSDISK1_PATH 1804{ 1805 U16 DevHandle; /* 0x00 */ 1806 U16 Reserved1; /* 0x02 */ 1807 U64 WWID; /* 0x04 */ 1808 U64 OwnerWWID; /* 0x0C */ 1809 U8 OwnerIdentifier; /* 0x14 */ 1810 U8 Reserved2; /* 0x15 */ 1811 U16 Flags; /* 0x16 */ 1812} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH, 1813 Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t; 1814 1815/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ 1816#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) 1817#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) 1818#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) 1819 1820typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 1821{ 1822 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ 1823 U8 NumPhysDiskPaths; /* 0x04 */ 1824 U8 PhysDiskNum; /* 0x05 */ 1825 U16 Reserved1; /* 0x06 */ 1826 U32 Reserved2; /* 0x08 */ 1827 MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */ 1828} MPI2_CONFIG_PAGE_RD_PDISK_1, 1829 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, 1830 Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t; 1831 1832#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) 1833 1834 1835/**************************************************************************** 1836* values for fields used by several types of SAS Config Pages 1837****************************************************************************/ 1838 1839/* values for NegotiatedLinkRates fields */ 1840#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) 1841#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) 1842#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) 1843/* link rates used for Negotiated Physical and Logical Link Rate */ 1844#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) 1845#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) 1846#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) 1847#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) 1848#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) 1849#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) 1850#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) 1851#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) 1852#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) 1853#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) 1854#define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B) 1855 1856 1857/* values for AttachedPhyInfo fields */ 1858#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) 1859#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) 1860#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) 1861 1862#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) 1863#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) 1864#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) 1865#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) 1866#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) 1867#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) 1868#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) 1869#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) 1870#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) 1871#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) 1872 1873 1874/* values for PhyInfo fields */ 1875#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) 1876 1877#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) 1878#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27) 1879#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000) 1880#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000) 1881#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000) 1882 1883#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) 1884#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) 1885#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) 1886#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) 1887#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) 1888#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) 1889 1890#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) 1891#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) 1892#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) 1893#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) 1894#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) 1895#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) 1896#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) 1897#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) 1898#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) 1899#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) 1900 1901#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) 1902#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) 1903#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) 1904#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) 1905 1906#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) 1907#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) 1908 1909#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) 1910#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) 1911#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) 1912#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) 1913 1914 1915/* values for SAS ProgrammedLinkRate fields */ 1916#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) 1917#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) 1918#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) 1919#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) 1920#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) 1921#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0) 1922#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) 1923#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) 1924#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) 1925#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) 1926#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) 1927#define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B) 1928 1929 1930/* values for SAS HwLinkRate fields */ 1931#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) 1932#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) 1933#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) 1934#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) 1935#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0) 1936#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) 1937#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) 1938#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) 1939#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) 1940#define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B) 1941 1942 1943 1944/**************************************************************************** 1945* SAS IO Unit Config Pages 1946****************************************************************************/ 1947 1948/* SAS IO Unit Page 0 */ 1949 1950typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA 1951{ 1952 U8 Port; /* 0x00 */ 1953 U8 PortFlags; /* 0x01 */ 1954 U8 PhyFlags; /* 0x02 */ 1955 U8 NegotiatedLinkRate; /* 0x03 */ 1956 U32 ControllerPhyDeviceInfo;/* 0x04 */ 1957 U16 AttachedDevHandle; /* 0x08 */ 1958 U16 ControllerDevHandle; /* 0x0A */ 1959 U32 DiscoveryStatus; /* 0x0C */ 1960 U32 Reserved; /* 0x10 */ 1961} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, 1962 Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t; 1963 1964/* 1965 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1966 * one and check the value returned for NumPhys at runtime. 1967 */ 1968#ifndef MPI2_SAS_IOUNIT0_PHY_MAX 1969#define MPI2_SAS_IOUNIT0_PHY_MAX (1) 1970#endif 1971 1972typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 1973{ 1974 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 1975 U32 Reserved1; /* 0x08 */ 1976 U8 NumPhys; /* 0x0C */ 1977 U8 Reserved2; /* 0x0D */ 1978 U16 Reserved3; /* 0x0E */ 1979 MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */ 1980} MPI2_CONFIG_PAGE_SASIOUNIT_0, 1981 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, 1982 Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t; 1983 1984#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) 1985 1986/* values for SAS IO Unit Page 0 PortFlags */ 1987#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) 1988#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) 1989 1990/* values for SAS IO Unit Page 0 PhyFlags */ 1991#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) 1992#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) 1993 1994/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ 1995 1996/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ 1997 1998/* values for SAS IO Unit Page 0 DiscoveryStatus */ 1999#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) 2000#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) 2001#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) 2002#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) 2003#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) 2004#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) 2005#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) 2006#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) 2007#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) 2008#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) 2009#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) 2010#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) 2011#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) 2012#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) 2013#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) 2014#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) 2015#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) 2016#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) 2017#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) 2018#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) 2019 2020 2021/* SAS IO Unit Page 1 */ 2022 2023typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA 2024{ 2025 U8 Port; /* 0x00 */ 2026 U8 PortFlags; /* 0x01 */ 2027 U8 PhyFlags; /* 0x02 */ 2028 U8 MaxMinLinkRate; /* 0x03 */ 2029 U32 ControllerPhyDeviceInfo; /* 0x04 */ 2030 U16 MaxTargetPortConnectTime; /* 0x08 */ 2031 U16 Reserved1; /* 0x0A */ 2032} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, 2033 Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t; 2034 2035/* 2036 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2037 * one and check the value returned for NumPhys at runtime. 2038 */ 2039#ifndef MPI2_SAS_IOUNIT1_PHY_MAX 2040#define MPI2_SAS_IOUNIT1_PHY_MAX (1) 2041#endif 2042 2043typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 2044{ 2045 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2046 U16 ControlFlags; /* 0x08 */ 2047 U16 SASNarrowMaxQueueDepth; /* 0x0A */ 2048 U16 AdditionalControlFlags; /* 0x0C */ 2049 U16 SASWideMaxQueueDepth; /* 0x0E */ 2050 U8 NumPhys; /* 0x10 */ 2051 U8 SATAMaxQDepth; /* 0x11 */ 2052 U8 ReportDeviceMissingDelay; /* 0x12 */ 2053 U8 IODeviceMissingDelay; /* 0x13 */ 2054 MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */ 2055} MPI2_CONFIG_PAGE_SASIOUNIT_1, 2056 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, 2057 Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t; 2058 2059#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) 2060 2061/* values for SAS IO Unit Page 1 ControlFlags */ 2062#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) 2063#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) 2064#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) /* MPI v2.0 only. Obsolete in MPI v2.5 and later. */ 2065#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) 2066 2067#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) 2068#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) 2069#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) 2070#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) 2071#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) 2072 2073#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) 2074#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) 2075#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) 2076#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) 2077#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) 2078#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) 2079#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) 2080#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) /* MPI v2.0 only. Obsolete in MPI v2.5 and later. */ 2081 2082/* values for SAS IO Unit Page 1 AdditionalControlFlags */ 2083#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) 2084#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) 2085#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) 2086#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) 2087#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) 2088#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) 2089#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) 2090#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) 2091 2092/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ 2093#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) 2094#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) 2095 2096/* values for SAS IO Unit Page 1 PortFlags */ 2097#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) 2098 2099/* values for SAS IO Unit Page 1 PhyFlags */ 2100#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) 2101#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) 2102 2103/* values for SAS IO Unit Page 1 MaxMinLinkRate */ 2104#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) 2105#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) 2106#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) 2107#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) 2108#define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0) 2109#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) 2110#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) 2111#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) 2112#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) 2113#define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B) 2114 2115/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ 2116 2117 2118/* SAS IO Unit Page 4 */ 2119 2120typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP 2121{ 2122 U8 MaxTargetSpinup; /* 0x00 */ 2123 U8 SpinupDelay; /* 0x01 */ 2124 U8 SpinupFlags; /* 0x02 */ 2125 U8 Reserved1; /* 0x03 */ 2126} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, 2127 Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t; 2128 2129/* defines for SAS IO Unit Page 4 SpinupFlags */ 2130#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01) 2131 2132 2133/* 2134 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2135 * one and check the value returned for NumPhys at runtime. 2136 */ 2137#ifndef MPI2_SAS_IOUNIT4_PHY_MAX 2138#define MPI2_SAS_IOUNIT4_PHY_MAX (4) 2139#endif 2140 2141typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 2142{ 2143 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2144 MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ 2145 U32 Reserved1; /* 0x18 */ 2146 U32 Reserved2; /* 0x1C */ 2147 U32 Reserved3; /* 0x20 */ 2148 U8 BootDeviceWaitTime; /* 0x24 */ 2149 U8 Reserved4; /* 0x25 */ 2150 U16 Reserved5; /* 0x26 */ 2151 U8 NumPhys; /* 0x28 */ 2152 U8 PEInitialSpinupDelay; /* 0x29 */ 2153 U8 PEReplyDelay; /* 0x2A */ 2154 U8 Flags; /* 0x2B */ 2155 U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */ 2156} MPI2_CONFIG_PAGE_SASIOUNIT_4, 2157 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, 2158 Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t; 2159 2160#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) 2161 2162/* defines for Flags field */ 2163#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) 2164 2165/* defines for PHY field */ 2166#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) 2167 2168 2169/* SAS IO Unit Page 5 */ 2170 2171typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS 2172{ 2173 U8 ControlFlags; /* 0x00 */ 2174 U8 PortWidthModGroup; /* 0x01 */ 2175 U16 InactivityTimerExponent; /* 0x02 */ 2176 U8 SATAPartialTimeout; /* 0x04 */ 2177 U8 Reserved2; /* 0x05 */ 2178 U8 SATASlumberTimeout; /* 0x06 */ 2179 U8 Reserved3; /* 0x07 */ 2180 U8 SASPartialTimeout; /* 0x08 */ 2181 U8 Reserved4; /* 0x09 */ 2182 U8 SASSlumberTimeout; /* 0x0A */ 2183 U8 Reserved5; /* 0x0B */ 2184} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, 2185 MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, 2186 Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t; 2187 2188/* defines for ControlFlags field */ 2189#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08) 2190#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04) 2191#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) 2192#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) 2193 2194/* defines for PortWidthModeGroup field */ 2195#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF) 2196 2197/* defines for InactivityTimerExponent field */ 2198#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) 2199#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) 2200#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700) 2201#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8) 2202#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070) 2203#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4) 2204#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007) 2205#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0) 2206 2207#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7) 2208#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6) 2209#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5) 2210#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4) 2211#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3) 2212#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2) 2213#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1) 2214#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) 2215 2216/* 2217 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2218 * one and check the value returned for NumPhys at runtime. 2219 */ 2220#ifndef MPI2_SAS_IOUNIT5_PHY_MAX 2221#define MPI2_SAS_IOUNIT5_PHY_MAX (1) 2222#endif 2223 2224typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 2225{ 2226 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2227 U8 NumPhys; /* 0x08 */ 2228 U8 Reserved1; /* 0x09 */ 2229 U16 Reserved2; /* 0x0A */ 2230 U32 Reserved3; /* 0x0C */ 2231 MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */ 2232} MPI2_CONFIG_PAGE_SASIOUNIT_5, 2233 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, 2234 Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t; 2235 2236#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01) 2237 2238 2239/* SAS IO Unit Page 6 */ 2240 2241typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS 2242{ 2243 U8 CurrentStatus; /* 0x00 */ 2244 U8 CurrentModulation; /* 0x01 */ 2245 U8 CurrentUtilization; /* 0x02 */ 2246 U8 Reserved1; /* 0x03 */ 2247 U32 Reserved2; /* 0x04 */ 2248} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, 2249 MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, 2250 Mpi2SasIOUnit6PortWidthModGroupStatus_t, 2251 MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t; 2252 2253/* defines for CurrentStatus field */ 2254#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00) 2255#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01) 2256#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02) 2257#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03) 2258#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04) 2259#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05) 2260#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06) 2261#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07) 2262 2263/* defines for CurrentModulation field */ 2264#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00) 2265#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01) 2266#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02) 2267#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) 2268 2269/* 2270 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2271 * one and check the value returned for NumGroups at runtime. 2272 */ 2273#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX 2274#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) 2275#endif 2276 2277typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 2278{ 2279 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2280 U32 Reserved1; /* 0x08 */ 2281 U32 Reserved2; /* 0x0C */ 2282 U8 NumGroups; /* 0x10 */ 2283 U8 Reserved3; /* 0x11 */ 2284 U16 Reserved4; /* 0x12 */ 2285 MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS 2286 PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */ 2287} MPI2_CONFIG_PAGE_SASIOUNIT_6, 2288 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, 2289 Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t; 2290 2291#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00) 2292 2293 2294/* SAS IO Unit Page 7 */ 2295 2296typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS 2297{ 2298 U8 Flags; /* 0x00 */ 2299 U8 Reserved1; /* 0x01 */ 2300 U16 Reserved2; /* 0x02 */ 2301 U8 Threshold75Pct; /* 0x04 */ 2302 U8 Threshold50Pct; /* 0x05 */ 2303 U8 Threshold25Pct; /* 0x06 */ 2304 U8 Reserved3; /* 0x07 */ 2305} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, 2306 MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, 2307 Mpi2SasIOUnit7PortWidthModGroupSettings_t, 2308 MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t; 2309 2310/* defines for Flags field */ 2311#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01) 2312 2313 2314/* 2315 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2316 * one and check the value returned for NumGroups at runtime. 2317 */ 2318#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX 2319#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) 2320#endif 2321 2322typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 2323{ 2324 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2325 U8 SamplingInterval; /* 0x08 */ 2326 U8 WindowLength; /* 0x09 */ 2327 U16 Reserved1; /* 0x0A */ 2328 U32 Reserved2; /* 0x0C */ 2329 U32 Reserved3; /* 0x10 */ 2330 U8 NumGroups; /* 0x14 */ 2331 U8 Reserved4; /* 0x15 */ 2332 U16 Reserved5; /* 0x16 */ 2333 MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS 2334 PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */ 2335} MPI2_CONFIG_PAGE_SASIOUNIT_7, 2336 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, 2337 Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t; 2338 2339#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00) 2340 2341 2342/* SAS IO Unit Page 8 */ 2343 2344typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 2345{ 2346 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2347 U32 Reserved1; /* 0x08 */ 2348 U32 PowerManagementCapabilities; /* 0x0C */ 2349 U8 TxRxSleepStatus; /* 0x10 */ /* reserved in MPI 2.0 */ 2350 U8 Reserved2; /* 0x11 */ 2351 U16 Reserved3; /* 0x12 */ 2352} MPI2_CONFIG_PAGE_SASIOUNIT_8, 2353 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8, 2354 Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t; 2355 2356#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) 2357 2358/* defines for PowerManagementCapabilities field */ 2359#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000) 2360#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800) 2361#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400) 2362#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200) 2363#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100) 2364#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010) 2365#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) 2366#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) 2367#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) 2368#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) 2369 2370/* defines for TxRxSleepStatus field */ 2371#define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00) 2372#define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01) 2373#define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02) 2374#define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03) 2375 2376 2377 2378/* SAS IO Unit Page 16 */ 2379 2380typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 2381{ 2382 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2383 U64 TimeStamp; /* 0x08 */ 2384 U32 Reserved1; /* 0x10 */ 2385 U32 Reserved2; /* 0x14 */ 2386 U32 FastPathPendedRequests; /* 0x18 */ 2387 U32 FastPathUnPendedRequests; /* 0x1C */ 2388 U32 FastPathHostRequestStarts; /* 0x20 */ 2389 U32 FastPathFirmwareRequestStarts; /* 0x24 */ 2390 U32 FastPathHostCompletions; /* 0x28 */ 2391 U32 FastPathFirmwareCompletions; /* 0x2C */ 2392 U32 NonFastPathRequestStarts; /* 0x30 */ 2393 U32 NonFastPathHostCompletions; /* 0x30 */ 2394} MPI2_CONFIG_PAGE_SASIOUNIT16, 2395 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT16, 2396 Mpi2SasIOUnitPage16_t, MPI2_POINTER pMpi2SasIOUnitPage16_t; 2397 2398#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00) 2399 2400 2401/**************************************************************************** 2402* SAS Expander Config Pages 2403****************************************************************************/ 2404 2405/* SAS Expander Page 0 */ 2406 2407typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 2408{ 2409 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2410 U8 PhysicalPort; /* 0x08 */ 2411 U8 ReportGenLength; /* 0x09 */ 2412 U16 EnclosureHandle; /* 0x0A */ 2413 U64 SASAddress; /* 0x0C */ 2414 U32 DiscoveryStatus; /* 0x14 */ 2415 U16 DevHandle; /* 0x18 */ 2416 U16 ParentDevHandle; /* 0x1A */ 2417 U16 ExpanderChangeCount; /* 0x1C */ 2418 U16 ExpanderRouteIndexes; /* 0x1E */ 2419 U8 NumPhys; /* 0x20 */ 2420 U8 SASLevel; /* 0x21 */ 2421 U16 Flags; /* 0x22 */ 2422 U16 STPBusInactivityTimeLimit; /* 0x24 */ 2423 U16 STPMaxConnectTimeLimit; /* 0x26 */ 2424 U16 STP_SMP_NexusLossTime; /* 0x28 */ 2425 U16 MaxNumRoutedSasAddresses; /* 0x2A */ 2426 U64 ActiveZoneManagerSASAddress;/* 0x2C */ 2427 U16 ZoneLockInactivityLimit; /* 0x34 */ 2428 U16 Reserved1; /* 0x36 */ 2429 U8 TimeToReducedFunc; /* 0x38 */ 2430 U8 InitialTimeToReducedFunc; /* 0x39 */ 2431 U8 MaxReducedFuncTime; /* 0x3A */ 2432 U8 Reserved2; /* 0x3B */ 2433} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, 2434 Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; 2435 2436#define MPI2_SASEXPANDER0_PAGEVERSION (0x06) 2437 2438/* values for SAS Expander Page 0 DiscoveryStatus field */ 2439#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) 2440#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) 2441#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) 2442#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) 2443#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) 2444#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) 2445#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) 2446#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) 2447#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) 2448#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) 2449#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) 2450#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) 2451#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) 2452#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) 2453#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) 2454#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) 2455#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) 2456#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) 2457#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) 2458#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) 2459 2460/* values for SAS Expander Page 0 Flags field */ 2461#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) 2462#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) 2463#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) 2464#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) 2465#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) 2466#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) 2467#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) 2468#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) 2469#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) 2470#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) 2471#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) 2472 2473 2474/* SAS Expander Page 1 */ 2475 2476typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 2477{ 2478 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2479 U8 PhysicalPort; /* 0x08 */ 2480 U8 Reserved1; /* 0x09 */ 2481 U16 Reserved2; /* 0x0A */ 2482 U8 NumPhys; /* 0x0C */ 2483 U8 Phy; /* 0x0D */ 2484 U16 NumTableEntriesProgrammed; /* 0x0E */ 2485 U8 ProgrammedLinkRate; /* 0x10 */ 2486 U8 HwLinkRate; /* 0x11 */ 2487 U16 AttachedDevHandle; /* 0x12 */ 2488 U32 PhyInfo; /* 0x14 */ 2489 U32 AttachedDeviceInfo; /* 0x18 */ 2490 U16 ExpanderDevHandle; /* 0x1C */ 2491 U8 ChangeCount; /* 0x1E */ 2492 U8 NegotiatedLinkRate; /* 0x1F */ 2493 U8 PhyIdentifier; /* 0x20 */ 2494 U8 AttachedPhyIdentifier; /* 0x21 */ 2495 U8 Reserved3; /* 0x22 */ 2496 U8 DiscoveryInfo; /* 0x23 */ 2497 U32 AttachedPhyInfo; /* 0x24 */ 2498 U8 ZoneGroup; /* 0x28 */ 2499 U8 SelfConfigStatus; /* 0x29 */ 2500 U16 Reserved4; /* 0x2A */ 2501} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1, 2502 Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t; 2503 2504#define MPI2_SASEXPANDER1_PAGEVERSION (0x02) 2505 2506/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ 2507 2508/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ 2509 2510/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ 2511 2512/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */ 2513 2514/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ 2515 2516/* values for SAS Expander Page 1 DiscoveryInfo field */ 2517#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) 2518#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) 2519#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) 2520 2521/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ 2522 2523 2524/**************************************************************************** 2525* SAS Device Config Pages 2526****************************************************************************/ 2527 2528/* SAS Device Page 0 */ 2529 2530typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 2531{ 2532 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2533 U16 Slot; /* 0x08 */ 2534 U16 EnclosureHandle; /* 0x0A */ 2535 U64 SASAddress; /* 0x0C */ 2536 U16 ParentDevHandle; /* 0x14 */ 2537 U8 PhyNum; /* 0x16 */ 2538 U8 AccessStatus; /* 0x17 */ 2539 U16 DevHandle; /* 0x18 */ 2540 U8 AttachedPhyIdentifier; /* 0x1A */ 2541 U8 ZoneGroup; /* 0x1B */ 2542 U32 DeviceInfo; /* 0x1C */ 2543 U16 Flags; /* 0x20 */ 2544 U8 PhysicalPort; /* 0x22 */ 2545 U8 MaxPortConnections; /* 0x23 */ 2546 U64 DeviceName; /* 0x24 */ 2547 U8 PortGroups; /* 0x2C */ 2548 U8 DmaGroup; /* 0x2D */ 2549 U8 ControlGroup; /* 0x2E */ 2550 U8 EnclosureLevel; /* 0x2F */ 2551 U8 ConnectorName[4]; /* 0x30 */ 2552 U32 Reserved3; /* 0x34 */ 2553} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, 2554 Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t; 2555 2556#define MPI2_SASDEVICE0_PAGEVERSION (0x09) 2557 2558/* values for SAS Device Page 0 AccessStatus field */ 2559#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) 2560#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) 2561#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) 2562#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) 2563#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) 2564#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) 2565#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) 2566#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) 2567/* specific values for SATA Init failures */ 2568#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) 2569#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) 2570#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) 2571#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) 2572#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) 2573#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) 2574#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) 2575#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) 2576#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) 2577#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) 2578#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) 2579 2580/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ 2581 2582/* values for SAS Device Page 0 Flags field */ 2583#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) 2584#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000) 2585#define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000) 2586#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) 2587#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) 2588#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) 2589#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) 2590#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) 2591#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) 2592#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) 2593#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) 2594#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) 2595#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) 2596#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002) 2597#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) 2598 2599 2600/* SAS Device Page 1 */ 2601 2602typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 2603{ 2604 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2605 U32 Reserved1; /* 0x08 */ 2606 U64 SASAddress; /* 0x0C */ 2607 U32 Reserved2; /* 0x14 */ 2608 U16 DevHandle; /* 0x18 */ 2609 U16 Reserved3; /* 0x1A */ 2610 U8 InitialRegDeviceFIS[20];/* 0x1C */ 2611} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, 2612 Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t; 2613 2614#define MPI2_SASDEVICE1_PAGEVERSION (0x01) 2615 2616 2617/**************************************************************************** 2618* SAS PHY Config Pages 2619****************************************************************************/ 2620 2621/* SAS PHY Page 0 */ 2622 2623typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 2624{ 2625 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2626 U16 OwnerDevHandle; /* 0x08 */ 2627 U16 Reserved1; /* 0x0A */ 2628 U16 AttachedDevHandle; /* 0x0C */ 2629 U8 AttachedPhyIdentifier; /* 0x0E */ 2630 U8 Reserved2; /* 0x0F */ 2631 U32 AttachedPhyInfo; /* 0x10 */ 2632 U8 ProgrammedLinkRate; /* 0x14 */ 2633 U8 HwLinkRate; /* 0x15 */ 2634 U8 ChangeCount; /* 0x16 */ 2635 U8 Flags; /* 0x17 */ 2636 U32 PhyInfo; /* 0x18 */ 2637 U8 NegotiatedLinkRate; /* 0x1C */ 2638 U8 Reserved3; /* 0x1D */ 2639 U16 Reserved4; /* 0x1E */ 2640} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, 2641 Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t; 2642 2643#define MPI2_SASPHY0_PAGEVERSION (0x03) 2644 2645/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ 2646 2647/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ 2648 2649/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ 2650 2651/* values for SAS PHY Page 0 Flags field */ 2652#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) 2653 2654/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ 2655 2656/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ 2657 2658 2659/* SAS PHY Page 1 */ 2660 2661typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 2662{ 2663 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2664 U32 Reserved1; /* 0x08 */ 2665 U32 InvalidDwordCount; /* 0x0C */ 2666 U32 RunningDisparityErrorCount; /* 0x10 */ 2667 U32 LossDwordSynchCount; /* 0x14 */ 2668 U32 PhyResetProblemCount; /* 0x18 */ 2669} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, 2670 Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t; 2671 2672#define MPI2_SASPHY1_PAGEVERSION (0x01) 2673 2674 2675/* SAS PHY Page 2 */ 2676 2677typedef struct _MPI2_SASPHY2_PHY_EVENT 2678{ 2679 U8 PhyEventCode; /* 0x00 */ 2680 U8 Reserved1; /* 0x01 */ 2681 U16 Reserved2; /* 0x02 */ 2682 U32 PhyEventInfo; /* 0x04 */ 2683} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT, 2684 Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t; 2685 2686/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */ 2687 2688 2689/* 2690 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2691 * one and check the value returned for NumPhyEvents at runtime. 2692 */ 2693#ifndef MPI2_SASPHY2_PHY_EVENT_MAX 2694#define MPI2_SASPHY2_PHY_EVENT_MAX (1) 2695#endif 2696 2697typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 2698{ 2699 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2700 U32 Reserved1; /* 0x08 */ 2701 U8 NumPhyEvents; /* 0x0C */ 2702 U8 Reserved2; /* 0x0D */ 2703 U16 Reserved3; /* 0x0E */ 2704 MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /* 0x10 */ 2705} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, 2706 Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t; 2707 2708#define MPI2_SASPHY2_PAGEVERSION (0x00) 2709 2710 2711/* SAS PHY Page 3 */ 2712 2713typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG 2714{ 2715 U8 PhyEventCode; /* 0x00 */ 2716 U8 Reserved1; /* 0x01 */ 2717 U16 Reserved2; /* 0x02 */ 2718 U8 CounterType; /* 0x04 */ 2719 U8 ThresholdWindow; /* 0x05 */ 2720 U8 TimeUnits; /* 0x06 */ 2721 U8 Reserved3; /* 0x07 */ 2722 U32 EventThreshold; /* 0x08 */ 2723 U16 ThresholdFlags; /* 0x0C */ 2724 U16 Reserved4; /* 0x0E */ 2725} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG, 2726 Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t; 2727 2728/* values for PhyEventCode field */ 2729#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00) 2730#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) 2731#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) 2732#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) 2733#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) 2734#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) 2735#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06) 2736#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) 2737#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) 2738#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) 2739#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) 2740#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) 2741#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) 2742#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) 2743#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27) 2744#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28) 2745#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) 2746#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A) 2747#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) 2748#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) 2749#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) 2750#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) 2751#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) 2752#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) 2753#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) 2754#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) 2755#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) 2756#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) 2757#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) 2758#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) 2759#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) 2760#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) 2761#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) 2762#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) 2763#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) 2764#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) 2765#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) 2766 2767/* values for the CounterType field */ 2768#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) 2769#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) 2770#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) 2771 2772/* values for the TimeUnits field */ 2773#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) 2774#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) 2775#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) 2776#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) 2777 2778/* values for the ThresholdFlags field */ 2779#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002) 2780#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) 2781 2782/* 2783 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2784 * one and check the value returned for NumPhyEvents at runtime. 2785 */ 2786#ifndef MPI2_SASPHY3_PHY_EVENT_MAX 2787#define MPI2_SASPHY3_PHY_EVENT_MAX (1) 2788#endif 2789 2790typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 2791{ 2792 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2793 U32 Reserved1; /* 0x08 */ 2794 U8 NumPhyEvents; /* 0x0C */ 2795 U8 Reserved2; /* 0x0D */ 2796 U16 Reserved3; /* 0x0E */ 2797 MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */ 2798} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, 2799 Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t; 2800 2801#define MPI2_SASPHY3_PAGEVERSION (0x00) 2802 2803 2804/* SAS PHY Page 4 */ 2805 2806typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 2807{ 2808 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2809 U16 Reserved1; /* 0x08 */ 2810 U8 Reserved2; /* 0x0A */ 2811 U8 Flags; /* 0x0B */ 2812 U8 InitialFrame[28]; /* 0x0C */ 2813} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4, 2814 Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t; 2815 2816#define MPI2_SASPHY4_PAGEVERSION (0x00) 2817 2818/* values for the Flags field */ 2819#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02) 2820#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01) 2821 2822 2823 2824 2825/**************************************************************************** 2826* SAS Port Config Pages 2827****************************************************************************/ 2828 2829/* SAS Port Page 0 */ 2830 2831typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 2832{ 2833 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2834 U8 PortNumber; /* 0x08 */ 2835 U8 PhysicalPort; /* 0x09 */ 2836 U8 PortWidth; /* 0x0A */ 2837 U8 PhysicalPortWidth; /* 0x0B */ 2838 U8 ZoneGroup; /* 0x0C */ 2839 U8 Reserved1; /* 0x0D */ 2840 U16 Reserved2; /* 0x0E */ 2841 U64 SASAddress; /* 0x10 */ 2842 U32 DeviceInfo; /* 0x18 */ 2843 U32 Reserved3; /* 0x1C */ 2844 U32 Reserved4; /* 0x20 */ 2845} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, 2846 Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t; 2847 2848#define MPI2_SASPORT0_PAGEVERSION (0x00) 2849 2850/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ 2851 2852 2853/**************************************************************************** 2854* SAS Enclosure Config Pages 2855****************************************************************************/ 2856 2857/* SAS Enclosure Page 0 */ 2858 2859typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 2860{ 2861 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2862 U32 Reserved1; /* 0x08 */ 2863 U64 EnclosureLogicalID; /* 0x0C */ 2864 U16 Flags; /* 0x14 */ 2865 U16 EnclosureHandle; /* 0x16 */ 2866 U16 NumSlots; /* 0x18 */ 2867 U16 StartSlot; /* 0x1A */ 2868 U8 Reserved2; /* 0x1C */ 2869 U8 EnclosureLevel; /* 0x1D */ 2870 U16 SEPDevHandle; /* 0x1E */ 2871 U32 Reserved3; /* 0x20 */ 2872 U32 Reserved4; /* 0x24 */ 2873} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, 2874 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, 2875 Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t; 2876 2877#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) 2878 2879/* values for SAS Enclosure Page 0 Flags field */ 2880#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) 2881#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) 2882#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) 2883#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) 2884#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) 2885#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) 2886#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) 2887#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) 2888 2889 2890/**************************************************************************** 2891* Log Config Page 2892****************************************************************************/ 2893 2894/* Log Page 0 */ 2895 2896/* 2897 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2898 * one and check the value returned for NumLogEntries at runtime. 2899 */ 2900#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES 2901#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) 2902#endif 2903 2904#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) 2905 2906typedef struct _MPI2_LOG_0_ENTRY 2907{ 2908 U64 TimeStamp; /* 0x00 */ 2909 U32 Reserved1; /* 0x08 */ 2910 U16 LogSequence; /* 0x0C */ 2911 U16 LogEntryQualifier; /* 0x0E */ 2912 U8 VP_ID; /* 0x10 */ 2913 U8 VF_ID; /* 0x11 */ 2914 U16 Reserved2; /* 0x12 */ 2915 U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */ 2916} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY, 2917 Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t; 2918 2919/* values for Log Page 0 LogEntry LogEntryQualifier field */ 2920#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) 2921#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) 2922#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) 2923#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) 2924#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) 2925 2926typedef struct _MPI2_CONFIG_PAGE_LOG_0 2927{ 2928 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2929 U32 Reserved1; /* 0x08 */ 2930 U32 Reserved2; /* 0x0C */ 2931 U16 NumLogEntries; /* 0x10 */ 2932 U16 Reserved3; /* 0x12 */ 2933 MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */ 2934} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0, 2935 Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t; 2936 2937#define MPI2_LOG_0_PAGEVERSION (0x02) 2938 2939 2940/**************************************************************************** 2941* RAID Config Page 2942****************************************************************************/ 2943 2944/* RAID Page 0 */ 2945 2946/* 2947 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2948 * one and check the value returned for NumElements at runtime. 2949 */ 2950#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS 2951#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) 2952#endif 2953 2954typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT 2955{ 2956 U16 ElementFlags; /* 0x00 */ 2957 U16 VolDevHandle; /* 0x02 */ 2958 U8 HotSparePool; /* 0x04 */ 2959 U8 PhysDiskNum; /* 0x05 */ 2960 U16 PhysDiskDevHandle; /* 0x06 */ 2961} MPI2_RAIDCONFIG0_CONFIG_ELEMENT, 2962 MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, 2963 Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t; 2964 2965/* values for the ElementFlags field */ 2966#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) 2967#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) 2968#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) 2969#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) 2970#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) 2971 2972 2973typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 2974{ 2975 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 2976 U8 NumHotSpares; /* 0x08 */ 2977 U8 NumPhysDisks; /* 0x09 */ 2978 U8 NumVolumes; /* 0x0A */ 2979 U8 ConfigNum; /* 0x0B */ 2980 U32 Flags; /* 0x0C */ 2981 U8 ConfigGUID[24]; /* 0x10 */ 2982 U32 Reserved1; /* 0x28 */ 2983 U8 NumElements; /* 0x2C */ 2984 U8 Reserved2; /* 0x2D */ 2985 U16 Reserved3; /* 0x2E */ 2986 MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */ 2987} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, 2988 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, 2989 Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t; 2990 2991#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) 2992 2993/* values for RAID Configuration Page 0 Flags field */ 2994#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) 2995 2996 2997/**************************************************************************** 2998* Driver Persistent Mapping Config Pages 2999****************************************************************************/ 3000 3001/* Driver Persistent Mapping Page 0 */ 3002 3003typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY 3004{ 3005 U64 PhysicalIdentifier; /* 0x00 */ 3006 U16 MappingInformation; /* 0x08 */ 3007 U16 DeviceIndex; /* 0x0A */ 3008 U32 PhysicalBitsMapping; /* 0x0C */ 3009 U32 Reserved1; /* 0x10 */ 3010} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, 3011 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, 3012 Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t; 3013 3014typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 3015{ 3016 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 3017 MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */ 3018} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, 3019 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, 3020 Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t; 3021 3022#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) 3023 3024/* values for Driver Persistent Mapping Page 0 MappingInformation field */ 3025#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) 3026#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) 3027#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) 3028 3029 3030/**************************************************************************** 3031* Ethernet Config Pages 3032****************************************************************************/ 3033 3034/* Ethernet Page 0 */ 3035 3036/* IP address (union of IPv4 and IPv6) */ 3037typedef union _MPI2_ETHERNET_IP_ADDR 3038{ 3039 U32 IPv4Addr; 3040 U32 IPv6Addr[4]; 3041} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR, 3042 Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t; 3043 3044#define MPI2_ETHERNET_HOST_NAME_LENGTH (32) 3045 3046typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 3047{ 3048 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 3049 U8 NumInterfaces; /* 0x08 */ 3050 U8 Reserved0; /* 0x09 */ 3051 U16 Reserved1; /* 0x0A */ 3052 U32 Status; /* 0x0C */ 3053 U8 MediaState; /* 0x10 */ 3054 U8 Reserved2; /* 0x11 */ 3055 U16 Reserved3; /* 0x12 */ 3056 U8 MacAddress[6]; /* 0x14 */ 3057 U8 Reserved4; /* 0x1A */ 3058 U8 Reserved5; /* 0x1B */ 3059 MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */ 3060 MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */ 3061 MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */ 3062 MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */ 3063 MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */ 3064 MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */ 3065 U8 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */ 3066} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0, 3067 Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t; 3068 3069#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00) 3070 3071/* values for Ethernet Page 0 Status field */ 3072#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000) 3073#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000) 3074#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000) 3075#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100) 3076#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080) 3077#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040) 3078#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020) 3079#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010) 3080#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008) 3081#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004) 3082#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002) 3083#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001) 3084 3085/* values for Ethernet Page 0 MediaState field */ 3086#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80) 3087#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00) 3088#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80) 3089 3090#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07) 3091#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00) 3092#define MPI2_ETHPG0_MS_10MBIT (0x01) 3093#define MPI2_ETHPG0_MS_100MBIT (0x02) 3094#define MPI2_ETHPG0_MS_1GBIT (0x03) 3095 3096 3097/* Ethernet Page 1 */ 3098 3099typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 3100{ 3101 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 3102 U32 Reserved0; /* 0x08 */ 3103 U32 Flags; /* 0x0C */ 3104 U8 MediaState; /* 0x10 */ 3105 U8 Reserved1; /* 0x11 */ 3106 U16 Reserved2; /* 0x12 */ 3107 U8 MacAddress[6]; /* 0x14 */ 3108 U8 Reserved3; /* 0x1A */ 3109 U8 Reserved4; /* 0x1B */ 3110 MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */ 3111 MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */ 3112 MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */ 3113 MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */ 3114 MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */ 3115 U32 Reserved5; /* 0x6C */ 3116 U32 Reserved6; /* 0x70 */ 3117 U32 Reserved7; /* 0x74 */ 3118 U32 Reserved8; /* 0x78 */ 3119 U8 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */ 3120} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1, 3121 Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t; 3122 3123#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00) 3124 3125/* values for Ethernet Page 1 Flags field */ 3126#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100) 3127#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080) 3128#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040) 3129#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020) 3130#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010) 3131#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008) 3132#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004) 3133#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002) 3134#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001) 3135 3136/* values for Ethernet Page 1 MediaState field */ 3137#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80) 3138#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00) 3139#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80) 3140 3141#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07) 3142#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00) 3143#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01) 3144#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02) 3145#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03) 3146 3147 3148/**************************************************************************** 3149* Extended Manufacturing Config Pages 3150****************************************************************************/ 3151 3152/* 3153 * Generic structure to use for product-specific extended manufacturing pages 3154 * (currently Extended Manufacturing Page 40 through Extended Manufacturing 3155 * Page 60). 3156 */ 3157 3158typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS 3159{ 3160 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ 3161 U32 ProductSpecificInfo; /* 0x08 */ 3162} MPI2_CONFIG_PAGE_EXT_MAN_PS, 3163 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS, 3164 Mpi2ExtManufacturingPagePS_t, MPI2_POINTER pMpi2ExtManufacturingPagePS_t; 3165 3166/* PageVersion should be provided by product-specific code */ 3167 3168#endif 3169 3170