1/*- 2 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification. 11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 12 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 13 * redistribution must be conditioned upon including a substantially 14 * similar Disclaimer requirement for further binary redistribution. 15 * 16 * NO WARRANTY 17 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 20 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 21 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 22 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 25 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 27 * THE POSSIBILITY OF SUCH DAMAGES. 28 */ 29 30#include <sys/cdefs.h> 31__FBSDID("$FreeBSD$"); 32 33/* 34 * Driver for the Atheros Wireless LAN controller. 35 * 36 * This software is derived from work of Atsushi Onoe; his contribution 37 * is greatly appreciated. 38 */ 39 40#include "opt_inet.h" 41#include "opt_ath.h" 42#include "opt_wlan.h" 43 44#include <sys/param.h> 45#include <sys/systm.h> 46#include <sys/sysctl.h> 47#include <sys/mbuf.h> 48#include <sys/malloc.h> 49#include <sys/lock.h> 50#include <sys/mutex.h> 51#include <sys/kernel.h> 52#include <sys/socket.h> 53#include <sys/sockio.h> 54#include <sys/errno.h> 55#include <sys/callout.h> 56#include <sys/bus.h> 57#include <sys/endian.h> 58#include <sys/kthread.h> 59#include <sys/taskqueue.h> 60#include <sys/priv.h> 61#include <sys/module.h> 62 63#include <machine/bus.h> 64 65#include <net/if.h> 66#include <net/if_dl.h> 67#include <net/if_media.h> 68#include <net/if_types.h> 69#include <net/if_arp.h> 70#include <net/ethernet.h> 71#include <net/if_llc.h> 72 73#include <net80211/ieee80211_var.h> 74#include <net80211/ieee80211_regdomain.h> 75#ifdef IEEE80211_SUPPORT_SUPERG 76#include <net80211/ieee80211_superg.h> 77#endif 78#ifdef IEEE80211_SUPPORT_TDMA 79#include <net80211/ieee80211_tdma.h> 80#endif 81 82#include <net/bpf.h> 83 84#ifdef INET 85#include <netinet/in.h> 86#include <netinet/if_ether.h> 87#endif 88 89#include <dev/ath/if_athvar.h> 90#include <dev/ath/ath_hal/ah_devid.h> /* XXX for softled */ 91#include <dev/ath/ath_hal/ah_diagcodes.h> 92 93#include <dev/ath/if_ath_debug.h> 94#include <dev/ath/if_ath_misc.h> 95#include <dev/ath/if_ath_tx.h> 96#include <dev/ath/if_ath_sysctl.h> 97#include <dev/ath/if_ath_keycache.h> 98#include <dev/ath/if_athdfs.h> 99 100#ifdef ATH_TX99_DIAG 101#include <dev/ath/ath_tx99/ath_tx99.h> 102#endif 103 104 105/* 106 * ATH_BCBUF determines the number of vap's that can transmit 107 * beacons and also (currently) the number of vap's that can 108 * have unique mac addresses/bssid. When staggering beacons 109 * 4 is probably a good max as otherwise the beacons become 110 * very closely spaced and there is limited time for cab q traffic 111 * to go out. You can burst beacons instead but that is not good 112 * for stations in power save and at some point you really want 113 * another radio (and channel). 114 * 115 * The limit on the number of mac addresses is tied to our use of 116 * the U/L bit and tracking addresses in a byte; it would be 117 * worthwhile to allow more for applications like proxy sta. 118 */ 119CTASSERT(ATH_BCBUF <= 8); 120 121static struct ieee80211vap *ath_vap_create(struct ieee80211com *, 122 const char [IFNAMSIZ], int, enum ieee80211_opmode, int, 123 const uint8_t [IEEE80211_ADDR_LEN], 124 const uint8_t [IEEE80211_ADDR_LEN]); 125static void ath_vap_delete(struct ieee80211vap *); 126static void ath_init(void *); 127static void ath_stop_locked(struct ifnet *); 128static void ath_stop(struct ifnet *); 129static void ath_start(struct ifnet *); 130static int ath_reset_vap(struct ieee80211vap *, u_long); 131static int ath_media_change(struct ifnet *); 132static void ath_watchdog(void *); 133static int ath_ioctl(struct ifnet *, u_long, caddr_t); 134static void ath_fatal_proc(void *, int); 135static void ath_bmiss_vap(struct ieee80211vap *); 136static void ath_bmiss_proc(void *, int); 137static void ath_key_update_begin(struct ieee80211vap *); 138static void ath_key_update_end(struct ieee80211vap *); 139static void ath_update_mcast(struct ifnet *); 140static void ath_update_promisc(struct ifnet *); 141static void ath_mode_init(struct ath_softc *); 142static void ath_setslottime(struct ath_softc *); 143static void ath_updateslot(struct ifnet *); 144static int ath_beaconq_setup(struct ath_hal *); 145static int ath_beacon_alloc(struct ath_softc *, struct ieee80211_node *); 146static void ath_beacon_update(struct ieee80211vap *, int item); 147static void ath_beacon_setup(struct ath_softc *, struct ath_buf *); 148static void ath_beacon_proc(void *, int); 149static struct ath_buf *ath_beacon_generate(struct ath_softc *, 150 struct ieee80211vap *); 151static void ath_bstuck_proc(void *, int); 152static void ath_beacon_return(struct ath_softc *, struct ath_buf *); 153static void ath_beacon_free(struct ath_softc *); 154static void ath_beacon_config(struct ath_softc *, struct ieee80211vap *); 155static void ath_descdma_cleanup(struct ath_softc *sc, 156 struct ath_descdma *, ath_bufhead *); 157static int ath_desc_alloc(struct ath_softc *); 158static void ath_desc_free(struct ath_softc *); 159static struct ieee80211_node *ath_node_alloc(struct ieee80211vap *, 160 const uint8_t [IEEE80211_ADDR_LEN]); 161static void ath_node_free(struct ieee80211_node *); 162static void ath_node_getsignal(const struct ieee80211_node *, 163 int8_t *, int8_t *); 164static int ath_rxbuf_init(struct ath_softc *, struct ath_buf *); 165static void ath_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m, 166 int subtype, int rssi, int nf); 167static void ath_setdefantenna(struct ath_softc *, u_int); 168static void ath_rx_proc(void *, int); 169static void ath_txq_init(struct ath_softc *sc, struct ath_txq *, int); 170static struct ath_txq *ath_txq_setup(struct ath_softc*, int qtype, int subtype); 171static int ath_tx_setup(struct ath_softc *, int, int); 172static int ath_wme_update(struct ieee80211com *); 173static void ath_tx_cleanupq(struct ath_softc *, struct ath_txq *); 174static void ath_tx_cleanup(struct ath_softc *); 175static void ath_tx_proc_q0(void *, int); 176static void ath_tx_proc_q0123(void *, int); 177static void ath_tx_proc(void *, int); 178static void ath_tx_draintxq(struct ath_softc *, struct ath_txq *); 179static int ath_chan_set(struct ath_softc *, struct ieee80211_channel *); 180static void ath_draintxq(struct ath_softc *); 181static void ath_stoprecv(struct ath_softc *); 182static int ath_startrecv(struct ath_softc *); 183static void ath_chan_change(struct ath_softc *, struct ieee80211_channel *); 184static void ath_scan_start(struct ieee80211com *); 185static void ath_scan_end(struct ieee80211com *); 186static void ath_set_channel(struct ieee80211com *); 187static void ath_calibrate(void *); 188static int ath_newstate(struct ieee80211vap *, enum ieee80211_state, int); 189static void ath_setup_stationkey(struct ieee80211_node *); 190static void ath_newassoc(struct ieee80211_node *, int); 191static int ath_setregdomain(struct ieee80211com *, 192 struct ieee80211_regdomain *, int, 193 struct ieee80211_channel []); 194static void ath_getradiocaps(struct ieee80211com *, int, int *, 195 struct ieee80211_channel []); 196static int ath_getchannels(struct ath_softc *); 197static void ath_led_event(struct ath_softc *, int); 198 199static int ath_rate_setup(struct ath_softc *, u_int mode); 200static void ath_setcurmode(struct ath_softc *, enum ieee80211_phymode); 201 202static void ath_announce(struct ath_softc *); 203 204static void ath_dfs_tasklet(void *, int); 205 206#ifdef IEEE80211_SUPPORT_TDMA 207static void ath_tdma_settimers(struct ath_softc *sc, u_int32_t nexttbtt, 208 u_int32_t bintval); 209static void ath_tdma_bintvalsetup(struct ath_softc *sc, 210 const struct ieee80211_tdma_state *tdma); 211static void ath_tdma_config(struct ath_softc *sc, struct ieee80211vap *vap); 212static void ath_tdma_update(struct ieee80211_node *ni, 213 const struct ieee80211_tdma_param *tdma, int); 214static void ath_tdma_beacon_send(struct ath_softc *sc, 215 struct ieee80211vap *vap); 216 217#define TDMA_EP_MULTIPLIER (1<<10) /* pow2 to optimize out * and / */ 218#define TDMA_LPF_LEN 6 219#define TDMA_DUMMY_MARKER 0x127 220#define TDMA_EP_MUL(x, mul) ((x) * (mul)) 221#define TDMA_IN(x) (TDMA_EP_MUL((x), TDMA_EP_MULTIPLIER)) 222#define TDMA_LPF(x, y, len) \ 223 ((x != TDMA_DUMMY_MARKER) ? (((x) * ((len)-1) + (y)) / (len)) : (y)) 224#define TDMA_SAMPLE(x, y) do { \ 225 x = TDMA_LPF((x), TDMA_IN(y), TDMA_LPF_LEN); \ 226} while (0) 227#define TDMA_EP_RND(x,mul) \ 228 ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) 229#define TDMA_AVG(x) TDMA_EP_RND(x, TDMA_EP_MULTIPLIER) 230#endif /* IEEE80211_SUPPORT_TDMA */ 231 232SYSCTL_DECL(_hw_ath); 233 234/* XXX validate sysctl values */ 235static int ath_longcalinterval = 30; /* long cals every 30 secs */ 236SYSCTL_INT(_hw_ath, OID_AUTO, longcal, CTLFLAG_RW, &ath_longcalinterval, 237 0, "long chip calibration interval (secs)"); 238static int ath_shortcalinterval = 100; /* short cals every 100 ms */ 239SYSCTL_INT(_hw_ath, OID_AUTO, shortcal, CTLFLAG_RW, &ath_shortcalinterval, 240 0, "short chip calibration interval (msecs)"); 241static int ath_resetcalinterval = 20*60; /* reset cal state 20 mins */ 242SYSCTL_INT(_hw_ath, OID_AUTO, resetcal, CTLFLAG_RW, &ath_resetcalinterval, 243 0, "reset chip calibration results (secs)"); 244static int ath_anicalinterval = 100; /* ANI calibration - 100 msec */ 245SYSCTL_INT(_hw_ath, OID_AUTO, anical, CTLFLAG_RW, &ath_anicalinterval, 246 0, "ANI calibration (msecs)"); 247 248static int ath_rxbuf = ATH_RXBUF; /* # rx buffers to allocate */ 249SYSCTL_INT(_hw_ath, OID_AUTO, rxbuf, CTLFLAG_RW, &ath_rxbuf, 250 0, "rx buffers allocated"); 251TUNABLE_INT("hw.ath.rxbuf", &ath_rxbuf); 252static int ath_txbuf = ATH_TXBUF; /* # tx buffers to allocate */ 253SYSCTL_INT(_hw_ath, OID_AUTO, txbuf, CTLFLAG_RW, &ath_txbuf, 254 0, "tx buffers allocated"); 255TUNABLE_INT("hw.ath.txbuf", &ath_txbuf); 256 257static int ath_bstuck_threshold = 4; /* max missed beacons */ 258SYSCTL_INT(_hw_ath, OID_AUTO, bstuck, CTLFLAG_RW, &ath_bstuck_threshold, 259 0, "max missed beacon xmits before chip reset"); 260 261static MALLOC_DEFINE(M_ATHDEV, "athdev", "ath driver dma buffers"); 262 263#define HAL_MODE_HT20 (HAL_MODE_11NG_HT20 | HAL_MODE_11NA_HT20) 264#define HAL_MODE_HT40 \ 265 (HAL_MODE_11NG_HT40PLUS | HAL_MODE_11NG_HT40MINUS | \ 266 HAL_MODE_11NA_HT40PLUS | HAL_MODE_11NA_HT40MINUS) 267int 268ath_attach(u_int16_t devid, struct ath_softc *sc) 269{ 270 struct ifnet *ifp; 271 struct ieee80211com *ic; 272 struct ath_hal *ah = NULL; 273 HAL_STATUS status; 274 int error = 0, i; 275 u_int wmodes; 276 uint8_t macaddr[IEEE80211_ADDR_LEN]; 277 278 DPRINTF(sc, ATH_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid); 279 280 ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211); 281 if (ifp == NULL) { 282 device_printf(sc->sc_dev, "can not if_alloc()\n"); 283 error = ENOSPC; 284 goto bad; 285 } 286 ic = ifp->if_l2com; 287 288 /* set these up early for if_printf use */ 289 if_initname(ifp, device_get_name(sc->sc_dev), 290 device_get_unit(sc->sc_dev)); 291 292 ah = ath_hal_attach(devid, sc, sc->sc_st, sc->sc_sh, sc->sc_eepromdata, &status); 293 if (ah == NULL) { 294 if_printf(ifp, "unable to attach hardware; HAL status %u\n", 295 status); 296 error = ENXIO; 297 goto bad; 298 } 299 sc->sc_ah = ah; 300 sc->sc_invalid = 0; /* ready to go, enable interrupt handling */ 301#ifdef ATH_DEBUG 302 sc->sc_debug = ath_debug; 303#endif 304 305 /* 306 * Check if the MAC has multi-rate retry support. 307 * We do this by trying to setup a fake extended 308 * descriptor. MAC's that don't have support will 309 * return false w/o doing anything. MAC's that do 310 * support it will return true w/o doing anything. 311 */ 312 sc->sc_mrretry = ath_hal_setupxtxdesc(ah, NULL, 0,0, 0,0, 0,0); 313 314 /* 315 * Check if the device has hardware counters for PHY 316 * errors. If so we need to enable the MIB interrupt 317 * so we can act on stat triggers. 318 */ 319 if (ath_hal_hwphycounters(ah)) 320 sc->sc_needmib = 1; 321 322 /* 323 * Get the hardware key cache size. 324 */ 325 sc->sc_keymax = ath_hal_keycachesize(ah); 326 if (sc->sc_keymax > ATH_KEYMAX) { 327 if_printf(ifp, "Warning, using only %u of %u key cache slots\n", 328 ATH_KEYMAX, sc->sc_keymax); 329 sc->sc_keymax = ATH_KEYMAX; 330 } 331 /* 332 * Reset the key cache since some parts do not 333 * reset the contents on initial power up. 334 */ 335 for (i = 0; i < sc->sc_keymax; i++) 336 ath_hal_keyreset(ah, i); 337 338 /* 339 * Collect the default channel list. 340 */ 341 error = ath_getchannels(sc); 342 if (error != 0) 343 goto bad; 344 345 /* 346 * Setup rate tables for all potential media types. 347 */ 348 ath_rate_setup(sc, IEEE80211_MODE_11A); 349 ath_rate_setup(sc, IEEE80211_MODE_11B); 350 ath_rate_setup(sc, IEEE80211_MODE_11G); 351 ath_rate_setup(sc, IEEE80211_MODE_TURBO_A); 352 ath_rate_setup(sc, IEEE80211_MODE_TURBO_G); 353 ath_rate_setup(sc, IEEE80211_MODE_STURBO_A); 354 ath_rate_setup(sc, IEEE80211_MODE_11NA); 355 ath_rate_setup(sc, IEEE80211_MODE_11NG); 356 ath_rate_setup(sc, IEEE80211_MODE_HALF); 357 ath_rate_setup(sc, IEEE80211_MODE_QUARTER); 358 359 /* NB: setup here so ath_rate_update is happy */ 360 ath_setcurmode(sc, IEEE80211_MODE_11A); 361 362 /* 363 * Allocate tx+rx descriptors and populate the lists. 364 */ 365 error = ath_desc_alloc(sc); 366 if (error != 0) { 367 if_printf(ifp, "failed to allocate descriptors: %d\n", error); 368 goto bad; 369 } 370 callout_init_mtx(&sc->sc_cal_ch, &sc->sc_mtx, 0); 371 callout_init_mtx(&sc->sc_wd_ch, &sc->sc_mtx, 0); 372 373 ATH_TXBUF_LOCK_INIT(sc); 374 375 sc->sc_tq = taskqueue_create("ath_taskq", M_NOWAIT, 376 taskqueue_thread_enqueue, &sc->sc_tq); 377 taskqueue_start_threads(&sc->sc_tq, 1, PI_NET, 378 "%s taskq", ifp->if_xname); 379 380 TASK_INIT(&sc->sc_rxtask, 0, ath_rx_proc, sc); 381 TASK_INIT(&sc->sc_bmisstask, 0, ath_bmiss_proc, sc); 382 TASK_INIT(&sc->sc_bstucktask,0, ath_bstuck_proc, sc); 383 384 /* 385 * Allocate hardware transmit queues: one queue for 386 * beacon frames and one data queue for each QoS 387 * priority. Note that the hal handles resetting 388 * these queues at the needed time. 389 * 390 * XXX PS-Poll 391 */ 392 sc->sc_bhalq = ath_beaconq_setup(ah); 393 if (sc->sc_bhalq == (u_int) -1) { 394 if_printf(ifp, "unable to setup a beacon xmit queue!\n"); 395 error = EIO; 396 goto bad2; 397 } 398 sc->sc_cabq = ath_txq_setup(sc, HAL_TX_QUEUE_CAB, 0); 399 if (sc->sc_cabq == NULL) { 400 if_printf(ifp, "unable to setup CAB xmit queue!\n"); 401 error = EIO; 402 goto bad2; 403 } 404 /* NB: insure BK queue is the lowest priority h/w queue */ 405 if (!ath_tx_setup(sc, WME_AC_BK, HAL_WME_AC_BK)) { 406 if_printf(ifp, "unable to setup xmit queue for %s traffic!\n", 407 ieee80211_wme_acnames[WME_AC_BK]); 408 error = EIO; 409 goto bad2; 410 } 411 if (!ath_tx_setup(sc, WME_AC_BE, HAL_WME_AC_BE) || 412 !ath_tx_setup(sc, WME_AC_VI, HAL_WME_AC_VI) || 413 !ath_tx_setup(sc, WME_AC_VO, HAL_WME_AC_VO)) { 414 /* 415 * Not enough hardware tx queues to properly do WME; 416 * just punt and assign them all to the same h/w queue. 417 * We could do a better job of this if, for example, 418 * we allocate queues when we switch from station to 419 * AP mode. 420 */ 421 if (sc->sc_ac2q[WME_AC_VI] != NULL) 422 ath_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_VI]); 423 if (sc->sc_ac2q[WME_AC_BE] != NULL) 424 ath_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_BE]); 425 sc->sc_ac2q[WME_AC_BE] = sc->sc_ac2q[WME_AC_BK]; 426 sc->sc_ac2q[WME_AC_VI] = sc->sc_ac2q[WME_AC_BK]; 427 sc->sc_ac2q[WME_AC_VO] = sc->sc_ac2q[WME_AC_BK]; 428 } 429 430 /* 431 * Special case certain configurations. Note the 432 * CAB queue is handled by these specially so don't 433 * include them when checking the txq setup mask. 434 */ 435 switch (sc->sc_txqsetup &~ (1<<sc->sc_cabq->axq_qnum)) { 436 case 0x01: 437 TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc_q0, sc); 438 break; 439 case 0x0f: 440 TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc_q0123, sc); 441 break; 442 default: 443 TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc, sc); 444 break; 445 } 446 447 /* 448 * Setup rate control. Some rate control modules 449 * call back to change the anntena state so expose 450 * the necessary entry points. 451 * XXX maybe belongs in struct ath_ratectrl? 452 */ 453 sc->sc_setdefantenna = ath_setdefantenna; 454 sc->sc_rc = ath_rate_attach(sc); 455 if (sc->sc_rc == NULL) { 456 error = EIO; 457 goto bad2; 458 } 459 460 /* Attach DFS module */ 461 if (! ath_dfs_attach(sc)) { 462 device_printf(sc->sc_dev, "%s: unable to attach DFS\n", __func__); 463 error = EIO; 464 goto bad2; 465 } 466 467 /* Start DFS processing tasklet */ 468 TASK_INIT(&sc->sc_dfstask, 0, ath_dfs_tasklet, sc); 469 470 sc->sc_blinking = 0; 471 sc->sc_ledstate = 1; 472 sc->sc_ledon = 0; /* low true */ 473 sc->sc_ledidle = (2700*hz)/1000; /* 2.7sec */ 474 callout_init(&sc->sc_ledtimer, CALLOUT_MPSAFE); 475 /* 476 * Auto-enable soft led processing for IBM cards and for 477 * 5211 minipci cards. Users can also manually enable/disable 478 * support with a sysctl. 479 */ 480 sc->sc_softled = (devid == AR5212_DEVID_IBM || devid == AR5211_DEVID); 481 if (sc->sc_softled) { 482 ath_hal_gpioCfgOutput(ah, sc->sc_ledpin, 483 HAL_GPIO_MUX_MAC_NETWORK_LED); 484 ath_hal_gpioset(ah, sc->sc_ledpin, !sc->sc_ledon); 485 } 486 487 ifp->if_softc = sc; 488 ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; 489 ifp->if_start = ath_start; 490 ifp->if_ioctl = ath_ioctl; 491 ifp->if_init = ath_init; 492 IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen); 493 ifp->if_snd.ifq_drv_maxlen = ifqmaxlen; 494 IFQ_SET_READY(&ifp->if_snd); 495 496 ic->ic_ifp = ifp; 497 /* XXX not right but it's not used anywhere important */ 498 ic->ic_phytype = IEEE80211_T_OFDM; 499 ic->ic_opmode = IEEE80211_M_STA; 500 ic->ic_caps = 501 IEEE80211_C_STA /* station mode */ 502 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 503 | IEEE80211_C_HOSTAP /* hostap mode */ 504 | IEEE80211_C_MONITOR /* monitor mode */ 505 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 506 | IEEE80211_C_WDS /* 4-address traffic works */ 507 | IEEE80211_C_MBSS /* mesh point link mode */ 508 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 509 | IEEE80211_C_SHSLOT /* short slot time supported */ 510 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 511 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 512 | IEEE80211_C_TXFRAG /* handle tx frags */ 513#ifdef ATH_ENABLE_DFS 514 | IEEE80211_C_DFS /* Enable DFS radar detection */ 515#endif 516 ; 517 /* 518 * Query the hal to figure out h/w crypto support. 519 */ 520 if (ath_hal_ciphersupported(ah, HAL_CIPHER_WEP)) 521 ic->ic_cryptocaps |= IEEE80211_CRYPTO_WEP; 522 if (ath_hal_ciphersupported(ah, HAL_CIPHER_AES_OCB)) 523 ic->ic_cryptocaps |= IEEE80211_CRYPTO_AES_OCB; 524 if (ath_hal_ciphersupported(ah, HAL_CIPHER_AES_CCM)) 525 ic->ic_cryptocaps |= IEEE80211_CRYPTO_AES_CCM; 526 if (ath_hal_ciphersupported(ah, HAL_CIPHER_CKIP)) 527 ic->ic_cryptocaps |= IEEE80211_CRYPTO_CKIP; 528 if (ath_hal_ciphersupported(ah, HAL_CIPHER_TKIP)) { 529 ic->ic_cryptocaps |= IEEE80211_CRYPTO_TKIP; 530 /* 531 * Check if h/w does the MIC and/or whether the 532 * separate key cache entries are required to 533 * handle both tx+rx MIC keys. 534 */ 535 if (ath_hal_ciphersupported(ah, HAL_CIPHER_MIC)) 536 ic->ic_cryptocaps |= IEEE80211_CRYPTO_TKIPMIC; 537 /* 538 * If the h/w supports storing tx+rx MIC keys 539 * in one cache slot automatically enable use. 540 */ 541 if (ath_hal_hastkipsplit(ah) || 542 !ath_hal_settkipsplit(ah, AH_FALSE)) 543 sc->sc_splitmic = 1; 544 /* 545 * If the h/w can do TKIP MIC together with WME then 546 * we use it; otherwise we force the MIC to be done 547 * in software by the net80211 layer. 548 */ 549 if (ath_hal_haswmetkipmic(ah)) 550 sc->sc_wmetkipmic = 1; 551 } 552 sc->sc_hasclrkey = ath_hal_ciphersupported(ah, HAL_CIPHER_CLR); 553 /* 554 * Check for multicast key search support. 555 */ 556 if (ath_hal_hasmcastkeysearch(sc->sc_ah) && 557 !ath_hal_getmcastkeysearch(sc->sc_ah)) { 558 ath_hal_setmcastkeysearch(sc->sc_ah, 1); 559 } 560 sc->sc_mcastkey = ath_hal_getmcastkeysearch(ah); 561 /* 562 * Mark key cache slots associated with global keys 563 * as in use. If we knew TKIP was not to be used we 564 * could leave the +32, +64, and +32+64 slots free. 565 */ 566 for (i = 0; i < IEEE80211_WEP_NKID; i++) { 567 setbit(sc->sc_keymap, i); 568 setbit(sc->sc_keymap, i+64); 569 if (sc->sc_splitmic) { 570 setbit(sc->sc_keymap, i+32); 571 setbit(sc->sc_keymap, i+32+64); 572 } 573 } 574 /* 575 * TPC support can be done either with a global cap or 576 * per-packet support. The latter is not available on 577 * all parts. We're a bit pedantic here as all parts 578 * support a global cap. 579 */ 580 if (ath_hal_hastpc(ah) || ath_hal_hastxpowlimit(ah)) 581 ic->ic_caps |= IEEE80211_C_TXPMGT; 582 583 /* 584 * Mark WME capability only if we have sufficient 585 * hardware queues to do proper priority scheduling. 586 */ 587 if (sc->sc_ac2q[WME_AC_BE] != sc->sc_ac2q[WME_AC_BK]) 588 ic->ic_caps |= IEEE80211_C_WME; 589 /* 590 * Check for misc other capabilities. 591 */ 592 if (ath_hal_hasbursting(ah)) 593 ic->ic_caps |= IEEE80211_C_BURST; 594 sc->sc_hasbmask = ath_hal_hasbssidmask(ah); 595 sc->sc_hasbmatch = ath_hal_hasbssidmatch(ah); 596 sc->sc_hastsfadd = ath_hal_hastsfadjust(ah); 597 sc->sc_rxslink = ath_hal_self_linked_final_rxdesc(ah); 598 sc->sc_rxtsf32 = ath_hal_has_long_rxdesc_tsf(ah); 599 if (ath_hal_hasfastframes(ah)) 600 ic->ic_caps |= IEEE80211_C_FF; 601 wmodes = ath_hal_getwirelessmodes(ah); 602 if (wmodes & (HAL_MODE_108G|HAL_MODE_TURBO)) 603 ic->ic_caps |= IEEE80211_C_TURBOP; 604#ifdef IEEE80211_SUPPORT_TDMA 605 if (ath_hal_macversion(ah) > 0x78) { 606 ic->ic_caps |= IEEE80211_C_TDMA; /* capable of TDMA */ 607 ic->ic_tdma_update = ath_tdma_update; 608 } 609#endif 610 611 /* 612 * The if_ath 11n support is completely not ready for normal use. 613 * Enabling this option will likely break everything and everything. 614 * Don't think of doing that unless you know what you're doing. 615 */ 616 617#ifdef ATH_ENABLE_11N 618 /* 619 * Query HT capabilities 620 */ 621 if (ath_hal_getcapability(ah, HAL_CAP_HT, 0, NULL) == HAL_OK && 622 (wmodes & (HAL_MODE_HT20 | HAL_MODE_HT40))) { 623 int rxs, txs; 624 625 device_printf(sc->sc_dev, "[HT] enabling HT modes\n"); 626 ic->ic_htcaps = IEEE80211_HTC_HT /* HT operation */ 627 | IEEE80211_HTC_AMPDU /* A-MPDU tx/rx */ 628 | IEEE80211_HTC_AMSDU /* A-MSDU tx/rx */ 629 | IEEE80211_HTCAP_MAXAMSDU_3839 /* max A-MSDU length */ 630 | IEEE80211_HTCAP_SMPS_OFF; /* SM power save off */ 631 ; 632 633 /* 634 * Enable short-GI for HT20 only if the hardware 635 * advertises support. 636 * Notably, anything earlier than the AR9287 doesn't. 637 */ 638 if ((ath_hal_getcapability(ah, 639 HAL_CAP_HT20_SGI, 0, NULL) == HAL_OK) && 640 (wmodes & HAL_MODE_HT20)) { 641 device_printf(sc->sc_dev, 642 "[HT] enabling short-GI in 20MHz mode\n"); 643 ic->ic_htcaps |= IEEE80211_HTCAP_SHORTGI20; 644 } 645 646 if (wmodes & HAL_MODE_HT40) 647 ic->ic_htcaps |= IEEE80211_HTCAP_CHWIDTH40 648 | IEEE80211_HTCAP_SHORTGI40; 649 650 /* 651 * rx/tx stream is not currently used anywhere; it needs to be taken 652 * into account when negotiating which MCS rates it'll receive and 653 * what MCS rates are available for TX. 654 */ 655 (void) ath_hal_getcapability(ah, HAL_CAP_STREAMS, 0, &rxs); 656 (void) ath_hal_getcapability(ah, HAL_CAP_STREAMS, 1, &txs); 657 658 ath_hal_getrxchainmask(ah, &sc->sc_rxchainmask); 659 ath_hal_gettxchainmask(ah, &sc->sc_txchainmask); 660 661 ic->ic_txstream = txs; 662 ic->ic_rxstream = rxs; 663 664 device_printf(sc->sc_dev, "[HT] %d RX streams; %d TX streams\n", rxs, txs); 665 } 666#endif 667 668 /* 669 * Indicate we need the 802.11 header padded to a 670 * 32-bit boundary for 4-address and QoS frames. 671 */ 672 ic->ic_flags |= IEEE80211_F_DATAPAD; 673 674 /* 675 * Query the hal about antenna support. 676 */ 677 sc->sc_defant = ath_hal_getdefantenna(ah); 678 679 /* 680 * Not all chips have the VEOL support we want to 681 * use with IBSS beacons; check here for it. 682 */ 683 sc->sc_hasveol = ath_hal_hasveol(ah); 684 685 /* get mac address from hardware */ 686 ath_hal_getmac(ah, macaddr); 687 if (sc->sc_hasbmask) 688 ath_hal_getbssidmask(ah, sc->sc_hwbssidmask); 689 690 /* NB: used to size node table key mapping array */ 691 ic->ic_max_keyix = sc->sc_keymax; 692 /* call MI attach routine. */ 693 ieee80211_ifattach(ic, macaddr); 694 ic->ic_setregdomain = ath_setregdomain; 695 ic->ic_getradiocaps = ath_getradiocaps; 696 sc->sc_opmode = HAL_M_STA; 697 698 /* override default methods */ 699 ic->ic_newassoc = ath_newassoc; 700 ic->ic_updateslot = ath_updateslot; 701 ic->ic_wme.wme_update = ath_wme_update; 702 ic->ic_vap_create = ath_vap_create; 703 ic->ic_vap_delete = ath_vap_delete; 704 ic->ic_raw_xmit = ath_raw_xmit; 705 ic->ic_update_mcast = ath_update_mcast; 706 ic->ic_update_promisc = ath_update_promisc; 707 ic->ic_node_alloc = ath_node_alloc; 708 sc->sc_node_free = ic->ic_node_free; 709 ic->ic_node_free = ath_node_free; 710 ic->ic_node_getsignal = ath_node_getsignal; 711 ic->ic_scan_start = ath_scan_start; 712 ic->ic_scan_end = ath_scan_end; 713 ic->ic_set_channel = ath_set_channel; 714 715 ieee80211_radiotap_attach(ic, 716 &sc->sc_tx_th.wt_ihdr, sizeof(sc->sc_tx_th), 717 ATH_TX_RADIOTAP_PRESENT, 718 &sc->sc_rx_th.wr_ihdr, sizeof(sc->sc_rx_th), 719 ATH_RX_RADIOTAP_PRESENT); 720 721 /* 722 * Setup dynamic sysctl's now that country code and 723 * regdomain are available from the hal. 724 */ 725 ath_sysctlattach(sc); 726 ath_sysctl_stats_attach(sc); 727 ath_sysctl_hal_attach(sc); 728 729 if (bootverbose) 730 ieee80211_announce(ic); 731 ath_announce(sc); 732 return 0; 733bad2: 734 ath_tx_cleanup(sc); 735 ath_desc_free(sc); 736bad: 737 if (ah) 738 ath_hal_detach(ah); 739 if (ifp != NULL) 740 if_free(ifp); 741 sc->sc_invalid = 1; 742 return error; 743} 744 745int 746ath_detach(struct ath_softc *sc) 747{ 748 struct ifnet *ifp = sc->sc_ifp; 749 750 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", 751 __func__, ifp->if_flags); 752 753 /* 754 * NB: the order of these is important: 755 * o stop the chip so no more interrupts will fire 756 * o call the 802.11 layer before detaching the hal to 757 * insure callbacks into the driver to delete global 758 * key cache entries can be handled 759 * o free the taskqueue which drains any pending tasks 760 * o reclaim the tx queue data structures after calling 761 * the 802.11 layer as we'll get called back to reclaim 762 * node state and potentially want to use them 763 * o to cleanup the tx queues the hal is called, so detach 764 * it last 765 * Other than that, it's straightforward... 766 */ 767 ath_stop(ifp); 768 ieee80211_ifdetach(ifp->if_l2com); 769 taskqueue_free(sc->sc_tq); 770#ifdef ATH_TX99_DIAG 771 if (sc->sc_tx99 != NULL) 772 sc->sc_tx99->detach(sc->sc_tx99); 773#endif 774 ath_rate_detach(sc->sc_rc); 775 776 ath_dfs_detach(sc); 777 ath_desc_free(sc); 778 ath_tx_cleanup(sc); 779 ath_hal_detach(sc->sc_ah); /* NB: sets chip in full sleep */ 780 if_free(ifp); 781 782 return 0; 783} 784 785/* 786 * MAC address handling for multiple BSS on the same radio. 787 * The first vap uses the MAC address from the EEPROM. For 788 * subsequent vap's we set the U/L bit (bit 1) in the MAC 789 * address and use the next six bits as an index. 790 */ 791static void 792assign_address(struct ath_softc *sc, uint8_t mac[IEEE80211_ADDR_LEN], int clone) 793{ 794 int i; 795 796 if (clone && sc->sc_hasbmask) { 797 /* NB: we only do this if h/w supports multiple bssid */ 798 for (i = 0; i < 8; i++) 799 if ((sc->sc_bssidmask & (1<<i)) == 0) 800 break; 801 if (i != 0) 802 mac[0] |= (i << 2)|0x2; 803 } else 804 i = 0; 805 sc->sc_bssidmask |= 1<<i; 806 sc->sc_hwbssidmask[0] &= ~mac[0]; 807 if (i == 0) 808 sc->sc_nbssid0++; 809} 810 811static void 812reclaim_address(struct ath_softc *sc, const uint8_t mac[IEEE80211_ADDR_LEN]) 813{ 814 int i = mac[0] >> 2; 815 uint8_t mask; 816 817 if (i != 0 || --sc->sc_nbssid0 == 0) { 818 sc->sc_bssidmask &= ~(1<<i); 819 /* recalculate bssid mask from remaining addresses */ 820 mask = 0xff; 821 for (i = 1; i < 8; i++) 822 if (sc->sc_bssidmask & (1<<i)) 823 mask &= ~((i<<2)|0x2); 824 sc->sc_hwbssidmask[0] |= mask; 825 } 826} 827 828/* 829 * Assign a beacon xmit slot. We try to space out 830 * assignments so when beacons are staggered the 831 * traffic coming out of the cab q has maximal time 832 * to go out before the next beacon is scheduled. 833 */ 834static int 835assign_bslot(struct ath_softc *sc) 836{ 837 u_int slot, free; 838 839 free = 0; 840 for (slot = 0; slot < ATH_BCBUF; slot++) 841 if (sc->sc_bslot[slot] == NULL) { 842 if (sc->sc_bslot[(slot+1)%ATH_BCBUF] == NULL && 843 sc->sc_bslot[(slot-1)%ATH_BCBUF] == NULL) 844 return slot; 845 free = slot; 846 /* NB: keep looking for a double slot */ 847 } 848 return free; 849} 850 851static struct ieee80211vap * 852ath_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 853 enum ieee80211_opmode opmode, int flags, 854 const uint8_t bssid[IEEE80211_ADDR_LEN], 855 const uint8_t mac0[IEEE80211_ADDR_LEN]) 856{ 857 struct ath_softc *sc = ic->ic_ifp->if_softc; 858 struct ath_vap *avp; 859 struct ieee80211vap *vap; 860 uint8_t mac[IEEE80211_ADDR_LEN]; 861 int needbeacon, error; 862 enum ieee80211_opmode ic_opmode; 863 864 avp = (struct ath_vap *) malloc(sizeof(struct ath_vap), 865 M_80211_VAP, M_WAITOK | M_ZERO); 866 needbeacon = 0; 867 IEEE80211_ADDR_COPY(mac, mac0); 868 869 ATH_LOCK(sc); 870 ic_opmode = opmode; /* default to opmode of new vap */ 871 switch (opmode) { 872 case IEEE80211_M_STA: 873 if (sc->sc_nstavaps != 0) { /* XXX only 1 for now */ 874 device_printf(sc->sc_dev, "only 1 sta vap supported\n"); 875 goto bad; 876 } 877 if (sc->sc_nvaps) { 878 /* 879 * With multiple vaps we must fall back 880 * to s/w beacon miss handling. 881 */ 882 flags |= IEEE80211_CLONE_NOBEACONS; 883 } 884 if (flags & IEEE80211_CLONE_NOBEACONS) { 885 /* 886 * Station mode w/o beacons are implemented w/ AP mode. 887 */ 888 ic_opmode = IEEE80211_M_HOSTAP; 889 } 890 break; 891 case IEEE80211_M_IBSS: 892 if (sc->sc_nvaps != 0) { /* XXX only 1 for now */ 893 device_printf(sc->sc_dev, 894 "only 1 ibss vap supported\n"); 895 goto bad; 896 } 897 needbeacon = 1; 898 break; 899 case IEEE80211_M_AHDEMO: 900#ifdef IEEE80211_SUPPORT_TDMA 901 if (flags & IEEE80211_CLONE_TDMA) { 902 if (sc->sc_nvaps != 0) { 903 device_printf(sc->sc_dev, 904 "only 1 tdma vap supported\n"); 905 goto bad; 906 } 907 needbeacon = 1; 908 flags |= IEEE80211_CLONE_NOBEACONS; 909 } 910 /* fall thru... */ 911#endif 912 case IEEE80211_M_MONITOR: 913 if (sc->sc_nvaps != 0 && ic->ic_opmode != opmode) { 914 /* 915 * Adopt existing mode. Adding a monitor or ahdemo 916 * vap to an existing configuration is of dubious 917 * value but should be ok. 918 */ 919 /* XXX not right for monitor mode */ 920 ic_opmode = ic->ic_opmode; 921 } 922 break; 923 case IEEE80211_M_HOSTAP: 924 case IEEE80211_M_MBSS: 925 needbeacon = 1; 926 break; 927 case IEEE80211_M_WDS: 928 if (sc->sc_nvaps != 0 && ic->ic_opmode == IEEE80211_M_STA) { 929 device_printf(sc->sc_dev, 930 "wds not supported in sta mode\n"); 931 goto bad; 932 } 933 /* 934 * Silently remove any request for a unique 935 * bssid; WDS vap's always share the local 936 * mac address. 937 */ 938 flags &= ~IEEE80211_CLONE_BSSID; 939 if (sc->sc_nvaps == 0) 940 ic_opmode = IEEE80211_M_HOSTAP; 941 else 942 ic_opmode = ic->ic_opmode; 943 break; 944 default: 945 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); 946 goto bad; 947 } 948 /* 949 * Check that a beacon buffer is available; the code below assumes it. 950 */ 951 if (needbeacon & STAILQ_EMPTY(&sc->sc_bbuf)) { 952 device_printf(sc->sc_dev, "no beacon buffer available\n"); 953 goto bad; 954 } 955 956 /* STA, AHDEMO? */ 957 if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS) { 958 assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID); 959 ath_hal_setbssidmask(sc->sc_ah, sc->sc_hwbssidmask); 960 } 961 962 vap = &avp->av_vap; 963 /* XXX can't hold mutex across if_alloc */ 964 ATH_UNLOCK(sc); 965 error = ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, 966 bssid, mac); 967 ATH_LOCK(sc); 968 if (error != 0) { 969 device_printf(sc->sc_dev, "%s: error %d creating vap\n", 970 __func__, error); 971 goto bad2; 972 } 973 974 /* h/w crypto support */ 975 vap->iv_key_alloc = ath_key_alloc; 976 vap->iv_key_delete = ath_key_delete; 977 vap->iv_key_set = ath_key_set; 978 vap->iv_key_update_begin = ath_key_update_begin; 979 vap->iv_key_update_end = ath_key_update_end; 980 981 /* override various methods */ 982 avp->av_recv_mgmt = vap->iv_recv_mgmt; 983 vap->iv_recv_mgmt = ath_recv_mgmt; 984 vap->iv_reset = ath_reset_vap; 985 vap->iv_update_beacon = ath_beacon_update; 986 avp->av_newstate = vap->iv_newstate; 987 vap->iv_newstate = ath_newstate; 988 avp->av_bmiss = vap->iv_bmiss; 989 vap->iv_bmiss = ath_bmiss_vap; 990 991 /* Set default parameters */ 992 993 /* 994 * Anything earlier than some AR9300 series MACs don't 995 * support a smaller MPDU density. 996 */ 997 vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_8; 998 /* 999 * All NICs can handle the maximum size, however 1000 * AR5416 based MACs can only TX aggregates w/ RTS 1001 * protection when the total aggregate size is <= 8k. 1002 * However, for now that's enforced by the TX path. 1003 */ 1004 vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_64K; 1005 1006 avp->av_bslot = -1; 1007 if (needbeacon) { 1008 /* 1009 * Allocate beacon state and setup the q for buffered 1010 * multicast frames. We know a beacon buffer is 1011 * available because we checked above. 1012 */ 1013 avp->av_bcbuf = STAILQ_FIRST(&sc->sc_bbuf); 1014 STAILQ_REMOVE_HEAD(&sc->sc_bbuf, bf_list); 1015 if (opmode != IEEE80211_M_IBSS || !sc->sc_hasveol) { 1016 /* 1017 * Assign the vap to a beacon xmit slot. As above 1018 * this cannot fail to find a free one. 1019 */ 1020 avp->av_bslot = assign_bslot(sc); 1021 KASSERT(sc->sc_bslot[avp->av_bslot] == NULL, 1022 ("beacon slot %u not empty", avp->av_bslot)); 1023 sc->sc_bslot[avp->av_bslot] = vap; 1024 sc->sc_nbcnvaps++; 1025 } 1026 if (sc->sc_hastsfadd && sc->sc_nbcnvaps > 0) { 1027 /* 1028 * Multple vaps are to transmit beacons and we 1029 * have h/w support for TSF adjusting; enable 1030 * use of staggered beacons. 1031 */ 1032 sc->sc_stagbeacons = 1; 1033 } 1034 ath_txq_init(sc, &avp->av_mcastq, ATH_TXQ_SWQ); 1035 } 1036 1037 ic->ic_opmode = ic_opmode; 1038 if (opmode != IEEE80211_M_WDS) { 1039 sc->sc_nvaps++; 1040 if (opmode == IEEE80211_M_STA) 1041 sc->sc_nstavaps++; 1042 if (opmode == IEEE80211_M_MBSS) 1043 sc->sc_nmeshvaps++; 1044 } 1045 switch (ic_opmode) { 1046 case IEEE80211_M_IBSS: 1047 sc->sc_opmode = HAL_M_IBSS; 1048 break; 1049 case IEEE80211_M_STA: 1050 sc->sc_opmode = HAL_M_STA; 1051 break; 1052 case IEEE80211_M_AHDEMO: 1053#ifdef IEEE80211_SUPPORT_TDMA 1054 if (vap->iv_caps & IEEE80211_C_TDMA) { 1055 sc->sc_tdma = 1; 1056 /* NB: disable tsf adjust */ 1057 sc->sc_stagbeacons = 0; 1058 } 1059 /* 1060 * NB: adhoc demo mode is a pseudo mode; to the hal it's 1061 * just ap mode. 1062 */ 1063 /* fall thru... */ 1064#endif 1065 case IEEE80211_M_HOSTAP: 1066 case IEEE80211_M_MBSS: 1067 sc->sc_opmode = HAL_M_HOSTAP; 1068 break; 1069 case IEEE80211_M_MONITOR: 1070 sc->sc_opmode = HAL_M_MONITOR; 1071 break; 1072 default: 1073 /* XXX should not happen */ 1074 break; 1075 } 1076 if (sc->sc_hastsfadd) { 1077 /* 1078 * Configure whether or not TSF adjust should be done. 1079 */ 1080 ath_hal_settsfadjust(sc->sc_ah, sc->sc_stagbeacons); 1081 } 1082 if (flags & IEEE80211_CLONE_NOBEACONS) { 1083 /* 1084 * Enable s/w beacon miss handling. 1085 */ 1086 sc->sc_swbmiss = 1; 1087 } 1088 ATH_UNLOCK(sc); 1089 1090 /* complete setup */ 1091 ieee80211_vap_attach(vap, ath_media_change, ieee80211_media_status); 1092 return vap; 1093bad2: 1094 reclaim_address(sc, mac); 1095 ath_hal_setbssidmask(sc->sc_ah, sc->sc_hwbssidmask); 1096bad: 1097 free(avp, M_80211_VAP); 1098 ATH_UNLOCK(sc); 1099 return NULL; 1100} 1101 1102static void 1103ath_vap_delete(struct ieee80211vap *vap) 1104{ 1105 struct ieee80211com *ic = vap->iv_ic; 1106 struct ifnet *ifp = ic->ic_ifp; 1107 struct ath_softc *sc = ifp->if_softc; 1108 struct ath_hal *ah = sc->sc_ah; 1109 struct ath_vap *avp = ATH_VAP(vap); 1110 1111 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 1112 /* 1113 * Quiesce the hardware while we remove the vap. In 1114 * particular we need to reclaim all references to 1115 * the vap state by any frames pending on the tx queues. 1116 */ 1117 ath_hal_intrset(ah, 0); /* disable interrupts */ 1118 ath_draintxq(sc); /* stop xmit side */ 1119 ath_stoprecv(sc); /* stop recv side */ 1120 } 1121 1122 ieee80211_vap_detach(vap); 1123 ATH_LOCK(sc); 1124 /* 1125 * Reclaim beacon state. Note this must be done before 1126 * the vap instance is reclaimed as we may have a reference 1127 * to it in the buffer for the beacon frame. 1128 */ 1129 if (avp->av_bcbuf != NULL) { 1130 if (avp->av_bslot != -1) { 1131 sc->sc_bslot[avp->av_bslot] = NULL; 1132 sc->sc_nbcnvaps--; 1133 } 1134 ath_beacon_return(sc, avp->av_bcbuf); 1135 avp->av_bcbuf = NULL; 1136 if (sc->sc_nbcnvaps == 0) { 1137 sc->sc_stagbeacons = 0; 1138 if (sc->sc_hastsfadd) 1139 ath_hal_settsfadjust(sc->sc_ah, 0); 1140 } 1141 /* 1142 * Reclaim any pending mcast frames for the vap. 1143 */ 1144 ath_tx_draintxq(sc, &avp->av_mcastq); 1145 ATH_TXQ_LOCK_DESTROY(&avp->av_mcastq); 1146 } 1147 /* 1148 * Update bookkeeping. 1149 */ 1150 if (vap->iv_opmode == IEEE80211_M_STA) { 1151 sc->sc_nstavaps--; 1152 if (sc->sc_nstavaps == 0 && sc->sc_swbmiss) 1153 sc->sc_swbmiss = 0; 1154 } else if (vap->iv_opmode == IEEE80211_M_HOSTAP || 1155 vap->iv_opmode == IEEE80211_M_MBSS) { 1156 reclaim_address(sc, vap->iv_myaddr); 1157 ath_hal_setbssidmask(ah, sc->sc_hwbssidmask); 1158 if (vap->iv_opmode == IEEE80211_M_MBSS) 1159 sc->sc_nmeshvaps--; 1160 } 1161 if (vap->iv_opmode != IEEE80211_M_WDS) 1162 sc->sc_nvaps--; 1163#ifdef IEEE80211_SUPPORT_TDMA 1164 /* TDMA operation ceases when the last vap is destroyed */ 1165 if (sc->sc_tdma && sc->sc_nvaps == 0) { 1166 sc->sc_tdma = 0; 1167 sc->sc_swbmiss = 0; 1168 } 1169#endif 1170 ATH_UNLOCK(sc); 1171 free(avp, M_80211_VAP); 1172 1173 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 1174 /* 1175 * Restart rx+tx machines if still running (RUNNING will 1176 * be reset if we just destroyed the last vap). 1177 */ 1178 if (ath_startrecv(sc) != 0) 1179 if_printf(ifp, "%s: unable to restart recv logic\n", 1180 __func__); 1181 if (sc->sc_beacons) { /* restart beacons */ 1182#ifdef IEEE80211_SUPPORT_TDMA 1183 if (sc->sc_tdma) 1184 ath_tdma_config(sc, NULL); 1185 else 1186#endif 1187 ath_beacon_config(sc, NULL); 1188 } 1189 ath_hal_intrset(ah, sc->sc_imask); 1190 } 1191} 1192 1193void 1194ath_suspend(struct ath_softc *sc) 1195{ 1196 struct ifnet *ifp = sc->sc_ifp; 1197 struct ieee80211com *ic = ifp->if_l2com; 1198 1199 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", 1200 __func__, ifp->if_flags); 1201 1202 sc->sc_resume_up = (ifp->if_flags & IFF_UP) != 0; 1203 if (ic->ic_opmode == IEEE80211_M_STA) 1204 ath_stop(ifp); 1205 else 1206 ieee80211_suspend_all(ic); 1207 /* 1208 * NB: don't worry about putting the chip in low power 1209 * mode; pci will power off our socket on suspend and 1210 * CardBus detaches the device. 1211 */ 1212} 1213 1214/* 1215 * Reset the key cache since some parts do not reset the 1216 * contents on resume. First we clear all entries, then 1217 * re-load keys that the 802.11 layer assumes are setup 1218 * in h/w. 1219 */ 1220static void 1221ath_reset_keycache(struct ath_softc *sc) 1222{ 1223 struct ifnet *ifp = sc->sc_ifp; 1224 struct ieee80211com *ic = ifp->if_l2com; 1225 struct ath_hal *ah = sc->sc_ah; 1226 int i; 1227 1228 for (i = 0; i < sc->sc_keymax; i++) 1229 ath_hal_keyreset(ah, i); 1230 ieee80211_crypto_reload_keys(ic); 1231} 1232 1233void 1234ath_resume(struct ath_softc *sc) 1235{ 1236 struct ifnet *ifp = sc->sc_ifp; 1237 struct ieee80211com *ic = ifp->if_l2com; 1238 struct ath_hal *ah = sc->sc_ah; 1239 HAL_STATUS status; 1240 1241 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", 1242 __func__, ifp->if_flags); 1243 1244 /* 1245 * Must reset the chip before we reload the 1246 * keycache as we were powered down on suspend. 1247 */ 1248 ath_hal_reset(ah, sc->sc_opmode, 1249 sc->sc_curchan != NULL ? sc->sc_curchan : ic->ic_curchan, 1250 AH_FALSE, &status); 1251 ath_reset_keycache(sc); 1252 1253 /* Let DFS at it in case it's a DFS channel */ 1254 ath_dfs_radar_enable(sc, ic->ic_curchan); 1255 1256 if (sc->sc_resume_up) { 1257 if (ic->ic_opmode == IEEE80211_M_STA) { 1258 ath_init(sc); 1259 /* 1260 * Program the beacon registers using the last rx'd 1261 * beacon frame and enable sync on the next beacon 1262 * we see. This should handle the case where we 1263 * wakeup and find the same AP and also the case where 1264 * we wakeup and need to roam. For the latter we 1265 * should get bmiss events that trigger a roam. 1266 */ 1267 ath_beacon_config(sc, NULL); 1268 sc->sc_syncbeacon = 1; 1269 } else 1270 ieee80211_resume_all(ic); 1271 } 1272 if (sc->sc_softled) { 1273 ath_hal_gpioCfgOutput(ah, sc->sc_ledpin, 1274 HAL_GPIO_MUX_MAC_NETWORK_LED); 1275 ath_hal_gpioset(ah, sc->sc_ledpin, !sc->sc_ledon); 1276 } 1277 1278 /* XXX beacons ? */ 1279} 1280 1281void 1282ath_shutdown(struct ath_softc *sc) 1283{ 1284 struct ifnet *ifp = sc->sc_ifp; 1285 1286 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", 1287 __func__, ifp->if_flags); 1288 1289 ath_stop(ifp); 1290 /* NB: no point powering down chip as we're about to reboot */ 1291} 1292 1293/* 1294 * Interrupt handler. Most of the actual processing is deferred. 1295 */ 1296void 1297ath_intr(void *arg) 1298{ 1299 struct ath_softc *sc = arg; 1300 struct ifnet *ifp = sc->sc_ifp; 1301 struct ath_hal *ah = sc->sc_ah; 1302 HAL_INT status = 0; 1303 1304 if (sc->sc_invalid) { 1305 /* 1306 * The hardware is not ready/present, don't touch anything. 1307 * Note this can happen early on if the IRQ is shared. 1308 */ 1309 DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid; ignored\n", __func__); 1310 return; 1311 } 1312 if (!ath_hal_intrpend(ah)) /* shared irq, not for us */ 1313 return; 1314 if ((ifp->if_flags & IFF_UP) == 0 || 1315 (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 1316 HAL_INT status; 1317 1318 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags 0x%x\n", 1319 __func__, ifp->if_flags); 1320 ath_hal_getisr(ah, &status); /* clear ISR */ 1321 ath_hal_intrset(ah, 0); /* disable further intr's */ 1322 return; 1323 } 1324 /* 1325 * Figure out the reason(s) for the interrupt. Note 1326 * that the hal returns a pseudo-ISR that may include 1327 * bits we haven't explicitly enabled so we mask the 1328 * value to insure we only process bits we requested. 1329 */ 1330 ath_hal_getisr(ah, &status); /* NB: clears ISR too */ 1331 DPRINTF(sc, ATH_DEBUG_INTR, "%s: status 0x%x\n", __func__, status); 1332 status &= sc->sc_imask; /* discard unasked for bits */ 1333 1334 /* Short-circuit un-handled interrupts */ 1335 if (status == 0x0) 1336 return; 1337 1338 if (status & HAL_INT_FATAL) { 1339 sc->sc_stats.ast_hardware++; 1340 ath_hal_intrset(ah, 0); /* disable intr's until reset */ 1341 ath_fatal_proc(sc, 0); 1342 } else { 1343 if (status & HAL_INT_SWBA) { 1344 /* 1345 * Software beacon alert--time to send a beacon. 1346 * Handle beacon transmission directly; deferring 1347 * this is too slow to meet timing constraints 1348 * under load. 1349 */ 1350#ifdef IEEE80211_SUPPORT_TDMA 1351 if (sc->sc_tdma) { 1352 if (sc->sc_tdmaswba == 0) { 1353 struct ieee80211com *ic = ifp->if_l2com; 1354 struct ieee80211vap *vap = 1355 TAILQ_FIRST(&ic->ic_vaps); 1356 ath_tdma_beacon_send(sc, vap); 1357 sc->sc_tdmaswba = 1358 vap->iv_tdma->tdma_bintval; 1359 } else 1360 sc->sc_tdmaswba--; 1361 } else 1362#endif 1363 { 1364 ath_beacon_proc(sc, 0); 1365#ifdef IEEE80211_SUPPORT_SUPERG 1366 /* 1367 * Schedule the rx taskq in case there's no 1368 * traffic so any frames held on the staging 1369 * queue are aged and potentially flushed. 1370 */ 1371 taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask); 1372#endif 1373 } 1374 } 1375 if (status & HAL_INT_RXEOL) { 1376 int imask = sc->sc_imask; 1377 /* 1378 * NB: the hardware should re-read the link when 1379 * RXE bit is written, but it doesn't work at 1380 * least on older hardware revs. 1381 */ 1382 sc->sc_stats.ast_rxeol++; 1383 /* 1384 * Disable RXEOL/RXORN - prevent an interrupt 1385 * storm until the PCU logic can be reset. 1386 * In case the interface is reset some other 1387 * way before "sc_kickpcu" is called, don't 1388 * modify sc_imask - that way if it is reset 1389 * by a call to ath_reset() somehow, the 1390 * interrupt mask will be correctly reprogrammed. 1391 */ 1392 imask &= ~(HAL_INT_RXEOL | HAL_INT_RXORN); 1393 ath_hal_intrset(ah, imask); 1394 /* 1395 * Enqueue an RX proc, to handled whatever 1396 * is in the RX queue. 1397 * This will then kick the PCU. 1398 */ 1399 taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask); 1400 sc->sc_rxlink = NULL; 1401 sc->sc_kickpcu = 1; 1402 } 1403 if (status & HAL_INT_TXURN) { 1404 sc->sc_stats.ast_txurn++; 1405 /* bump tx trigger level */ 1406 ath_hal_updatetxtriglevel(ah, AH_TRUE); 1407 } 1408 if (status & HAL_INT_RX) 1409 taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask); 1410 if (status & HAL_INT_TX) 1411 taskqueue_enqueue(sc->sc_tq, &sc->sc_txtask); 1412 if (status & HAL_INT_BMISS) { 1413 sc->sc_stats.ast_bmiss++; 1414 taskqueue_enqueue(sc->sc_tq, &sc->sc_bmisstask); 1415 } 1416 if (status & HAL_INT_GTT) 1417 sc->sc_stats.ast_tx_timeout++; 1418 if (status & HAL_INT_CST) 1419 sc->sc_stats.ast_tx_cst++; 1420 if (status & HAL_INT_MIB) { 1421 sc->sc_stats.ast_mib++; 1422 /* 1423 * Disable interrupts until we service the MIB 1424 * interrupt; otherwise it will continue to fire. 1425 */ 1426 ath_hal_intrset(ah, 0); 1427 /* 1428 * Let the hal handle the event. We assume it will 1429 * clear whatever condition caused the interrupt. 1430 */ 1431 ath_hal_mibevent(ah, &sc->sc_halstats); 1432 ath_hal_intrset(ah, sc->sc_imask); 1433 } 1434 if (status & HAL_INT_RXORN) { 1435 /* NB: hal marks HAL_INT_FATAL when RXORN is fatal */ 1436 sc->sc_stats.ast_rxorn++; 1437 } 1438 } 1439} 1440 1441static void 1442ath_fatal_proc(void *arg, int pending) 1443{ 1444 struct ath_softc *sc = arg; 1445 struct ifnet *ifp = sc->sc_ifp; 1446 u_int32_t *state; 1447 u_int32_t len; 1448 void *sp; 1449 1450 if_printf(ifp, "hardware error; resetting\n"); 1451 /* 1452 * Fatal errors are unrecoverable. Typically these 1453 * are caused by DMA errors. Collect h/w state from 1454 * the hal so we can diagnose what's going on. 1455 */ 1456 if (ath_hal_getfatalstate(sc->sc_ah, &sp, &len)) { 1457 KASSERT(len >= 6*sizeof(u_int32_t), ("len %u bytes", len)); 1458 state = sp; 1459 if_printf(ifp, "0x%08x 0x%08x 0x%08x, 0x%08x 0x%08x 0x%08x\n", 1460 state[0], state[1] , state[2], state[3], 1461 state[4], state[5]); 1462 } 1463 ath_reset(ifp); 1464} 1465 1466static void 1467ath_bmiss_vap(struct ieee80211vap *vap) 1468{ 1469 /* 1470 * Workaround phantom bmiss interrupts by sanity-checking 1471 * the time of our last rx'd frame. If it is within the 1472 * beacon miss interval then ignore the interrupt. If it's 1473 * truly a bmiss we'll get another interrupt soon and that'll 1474 * be dispatched up for processing. Note this applies only 1475 * for h/w beacon miss events. 1476 */ 1477 if ((vap->iv_flags_ext & IEEE80211_FEXT_SWBMISS) == 0) { 1478 struct ifnet *ifp = vap->iv_ic->ic_ifp; 1479 struct ath_softc *sc = ifp->if_softc; 1480 u_int64_t lastrx = sc->sc_lastrx; 1481 u_int64_t tsf = ath_hal_gettsf64(sc->sc_ah); 1482 u_int bmisstimeout = 1483 vap->iv_bmissthreshold * vap->iv_bss->ni_intval * 1024; 1484 1485 DPRINTF(sc, ATH_DEBUG_BEACON, 1486 "%s: tsf %llu lastrx %lld (%llu) bmiss %u\n", 1487 __func__, (unsigned long long) tsf, 1488 (unsigned long long)(tsf - lastrx), 1489 (unsigned long long) lastrx, bmisstimeout); 1490 1491 if (tsf - lastrx <= bmisstimeout) { 1492 sc->sc_stats.ast_bmiss_phantom++; 1493 return; 1494 } 1495 } 1496 ATH_VAP(vap)->av_bmiss(vap); 1497} 1498 1499static int 1500ath_hal_gethangstate(struct ath_hal *ah, uint32_t mask, uint32_t *hangs) 1501{ 1502 uint32_t rsize; 1503 void *sp; 1504 1505 if (!ath_hal_getdiagstate(ah, HAL_DIAG_CHECK_HANGS, &mask, sizeof(mask), &sp, &rsize)) 1506 return 0; 1507 KASSERT(rsize == sizeof(uint32_t), ("resultsize %u", rsize)); 1508 *hangs = *(uint32_t *)sp; 1509 return 1; 1510} 1511 1512static void 1513ath_bmiss_proc(void *arg, int pending) 1514{ 1515 struct ath_softc *sc = arg; 1516 struct ifnet *ifp = sc->sc_ifp; 1517 uint32_t hangs; 1518 1519 DPRINTF(sc, ATH_DEBUG_ANY, "%s: pending %u\n", __func__, pending); 1520 1521 if (ath_hal_gethangstate(sc->sc_ah, 0xff, &hangs) && hangs != 0) { 1522 if_printf(ifp, "bb hang detected (0x%x), resetting\n", hangs); 1523 ath_reset(ifp); 1524 } else 1525 ieee80211_beacon_miss(ifp->if_l2com); 1526} 1527 1528/* 1529 * Handle TKIP MIC setup to deal hardware that doesn't do MIC 1530 * calcs together with WME. If necessary disable the crypto 1531 * hardware and mark the 802.11 state so keys will be setup 1532 * with the MIC work done in software. 1533 */ 1534static void 1535ath_settkipmic(struct ath_softc *sc) 1536{ 1537 struct ifnet *ifp = sc->sc_ifp; 1538 struct ieee80211com *ic = ifp->if_l2com; 1539 1540 if ((ic->ic_cryptocaps & IEEE80211_CRYPTO_TKIP) && !sc->sc_wmetkipmic) { 1541 if (ic->ic_flags & IEEE80211_F_WME) { 1542 ath_hal_settkipmic(sc->sc_ah, AH_FALSE); 1543 ic->ic_cryptocaps &= ~IEEE80211_CRYPTO_TKIPMIC; 1544 } else { 1545 ath_hal_settkipmic(sc->sc_ah, AH_TRUE); 1546 ic->ic_cryptocaps |= IEEE80211_CRYPTO_TKIPMIC; 1547 } 1548 } 1549} 1550 1551static void 1552ath_init(void *arg) 1553{ 1554 struct ath_softc *sc = (struct ath_softc *) arg; 1555 struct ifnet *ifp = sc->sc_ifp; 1556 struct ieee80211com *ic = ifp->if_l2com; 1557 struct ath_hal *ah = sc->sc_ah; 1558 HAL_STATUS status; 1559 1560 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags 0x%x\n", 1561 __func__, ifp->if_flags); 1562 1563 ATH_LOCK(sc); 1564 /* 1565 * Stop anything previously setup. This is safe 1566 * whether this is the first time through or not. 1567 */ 1568 ath_stop_locked(ifp); 1569 1570 /* 1571 * The basic interface to setting the hardware in a good 1572 * state is ``reset''. On return the hardware is known to 1573 * be powered up and with interrupts disabled. This must 1574 * be followed by initialization of the appropriate bits 1575 * and then setup of the interrupt mask. 1576 */ 1577 ath_settkipmic(sc); 1578 if (!ath_hal_reset(ah, sc->sc_opmode, ic->ic_curchan, AH_FALSE, &status)) { 1579 if_printf(ifp, "unable to reset hardware; hal status %u\n", 1580 status); 1581 ATH_UNLOCK(sc); 1582 return; 1583 } 1584 ath_chan_change(sc, ic->ic_curchan); 1585 1586 /* Let DFS at it in case it's a DFS channel */ 1587 ath_dfs_radar_enable(sc, ic->ic_curchan); 1588 1589 /* 1590 * Likewise this is set during reset so update 1591 * state cached in the driver. 1592 */ 1593 sc->sc_diversity = ath_hal_getdiversity(ah); 1594 sc->sc_lastlongcal = 0; 1595 sc->sc_resetcal = 1; 1596 sc->sc_lastcalreset = 0; 1597 sc->sc_lastani = 0; 1598 sc->sc_lastshortcal = 0; 1599 sc->sc_doresetcal = AH_FALSE; 1600 /* 1601 * Beacon timers were cleared here; give ath_newstate() 1602 * a hint that the beacon timers should be poked when 1603 * things transition to the RUN state. 1604 */ 1605 sc->sc_beacons = 0; 1606 1607 /* 1608 * Setup the hardware after reset: the key cache 1609 * is filled as needed and the receive engine is 1610 * set going. Frame transmit is handled entirely 1611 * in the frame output path; there's nothing to do 1612 * here except setup the interrupt mask. 1613 */ 1614 if (ath_startrecv(sc) != 0) { 1615 if_printf(ifp, "unable to start recv logic\n"); 1616 ATH_UNLOCK(sc); 1617 return; 1618 } 1619 1620 /* 1621 * Enable interrupts. 1622 */ 1623 sc->sc_imask = HAL_INT_RX | HAL_INT_TX 1624 | HAL_INT_RXEOL | HAL_INT_RXORN 1625 | HAL_INT_FATAL | HAL_INT_GLOBAL; 1626 /* 1627 * Enable MIB interrupts when there are hardware phy counters. 1628 * Note we only do this (at the moment) for station mode. 1629 */ 1630 if (sc->sc_needmib && ic->ic_opmode == IEEE80211_M_STA) 1631 sc->sc_imask |= HAL_INT_MIB; 1632 1633 /* Enable global TX timeout and carrier sense timeout if available */ 1634 if (ath_hal_gtxto_supported(ah)) 1635 sc->sc_imask |= HAL_INT_GTT; 1636 1637 DPRINTF(sc, ATH_DEBUG_RESET, "%s: imask=0x%x\n", 1638 __func__, sc->sc_imask); 1639 1640 ifp->if_drv_flags |= IFF_DRV_RUNNING; 1641 callout_reset(&sc->sc_wd_ch, hz, ath_watchdog, sc); 1642 ath_hal_intrset(ah, sc->sc_imask); 1643 1644 ATH_UNLOCK(sc); 1645 1646#ifdef ATH_TX99_DIAG 1647 if (sc->sc_tx99 != NULL) 1648 sc->sc_tx99->start(sc->sc_tx99); 1649 else 1650#endif 1651 ieee80211_start_all(ic); /* start all vap's */ 1652} 1653 1654static void 1655ath_stop_locked(struct ifnet *ifp) 1656{ 1657 struct ath_softc *sc = ifp->if_softc; 1658 struct ath_hal *ah = sc->sc_ah; 1659 1660 DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid %u if_flags 0x%x\n", 1661 __func__, sc->sc_invalid, ifp->if_flags); 1662 1663 ATH_LOCK_ASSERT(sc); 1664 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 1665 /* 1666 * Shutdown the hardware and driver: 1667 * reset 802.11 state machine 1668 * turn off timers 1669 * disable interrupts 1670 * turn off the radio 1671 * clear transmit machinery 1672 * clear receive machinery 1673 * drain and release tx queues 1674 * reclaim beacon resources 1675 * power down hardware 1676 * 1677 * Note that some of this work is not possible if the 1678 * hardware is gone (invalid). 1679 */ 1680#ifdef ATH_TX99_DIAG 1681 if (sc->sc_tx99 != NULL) 1682 sc->sc_tx99->stop(sc->sc_tx99); 1683#endif 1684 callout_stop(&sc->sc_wd_ch); 1685 sc->sc_wd_timer = 0; 1686 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 1687 if (!sc->sc_invalid) { 1688 if (sc->sc_softled) { 1689 callout_stop(&sc->sc_ledtimer); 1690 ath_hal_gpioset(ah, sc->sc_ledpin, 1691 !sc->sc_ledon); 1692 sc->sc_blinking = 0; 1693 } 1694 ath_hal_intrset(ah, 0); 1695 } 1696 ath_draintxq(sc); 1697 if (!sc->sc_invalid) { 1698 ath_stoprecv(sc); 1699 ath_hal_phydisable(ah); 1700 } else 1701 sc->sc_rxlink = NULL; 1702 ath_beacon_free(sc); /* XXX not needed */ 1703 } 1704} 1705 1706static void 1707ath_stop(struct ifnet *ifp) 1708{ 1709 struct ath_softc *sc = ifp->if_softc; 1710 1711 ATH_LOCK(sc); 1712 ath_stop_locked(ifp); 1713 ATH_UNLOCK(sc); 1714} 1715 1716/* 1717 * Reset the hardware w/o losing operational state. This is 1718 * basically a more efficient way of doing ath_stop, ath_init, 1719 * followed by state transitions to the current 802.11 1720 * operational state. Used to recover from various errors and 1721 * to reset or reload hardware state. 1722 */ 1723int 1724ath_reset(struct ifnet *ifp) 1725{ 1726 struct ath_softc *sc = ifp->if_softc; 1727 struct ieee80211com *ic = ifp->if_l2com; 1728 struct ath_hal *ah = sc->sc_ah; 1729 HAL_STATUS status; 1730 1731 ath_hal_intrset(ah, 0); /* disable interrupts */ 1732 ath_draintxq(sc); /* stop xmit side */ 1733 ath_stoprecv(sc); /* stop recv side */ 1734 ath_settkipmic(sc); /* configure TKIP MIC handling */ 1735 /* NB: indicate channel change so we do a full reset */ 1736 if (!ath_hal_reset(ah, sc->sc_opmode, ic->ic_curchan, AH_TRUE, &status)) 1737 if_printf(ifp, "%s: unable to reset hardware; hal status %u\n", 1738 __func__, status); 1739 sc->sc_diversity = ath_hal_getdiversity(ah); 1740 1741 /* Let DFS at it in case it's a DFS channel */ 1742 ath_dfs_radar_enable(sc, ic->ic_curchan); 1743 1744 if (ath_startrecv(sc) != 0) /* restart recv */ 1745 if_printf(ifp, "%s: unable to start recv logic\n", __func__); 1746 /* 1747 * We may be doing a reset in response to an ioctl 1748 * that changes the channel so update any state that 1749 * might change as a result. 1750 */ 1751 ath_chan_change(sc, ic->ic_curchan); 1752 if (sc->sc_beacons) { /* restart beacons */ 1753#ifdef IEEE80211_SUPPORT_TDMA 1754 if (sc->sc_tdma) 1755 ath_tdma_config(sc, NULL); 1756 else 1757#endif 1758 ath_beacon_config(sc, NULL); 1759 } 1760 ath_hal_intrset(ah, sc->sc_imask); 1761 1762 ath_start(ifp); /* restart xmit */ 1763 return 0; 1764} 1765 1766static int 1767ath_reset_vap(struct ieee80211vap *vap, u_long cmd) 1768{ 1769 struct ieee80211com *ic = vap->iv_ic; 1770 struct ifnet *ifp = ic->ic_ifp; 1771 struct ath_softc *sc = ifp->if_softc; 1772 struct ath_hal *ah = sc->sc_ah; 1773 1774 switch (cmd) { 1775 case IEEE80211_IOC_TXPOWER: 1776 /* 1777 * If per-packet TPC is enabled, then we have nothing 1778 * to do; otherwise we need to force the global limit. 1779 * All this can happen directly; no need to reset. 1780 */ 1781 if (!ath_hal_gettpc(ah)) 1782 ath_hal_settxpowlimit(ah, ic->ic_txpowlimit); 1783 return 0; 1784 } 1785 return ath_reset(ifp); 1786} 1787 1788struct ath_buf * 1789_ath_getbuf_locked(struct ath_softc *sc) 1790{ 1791 struct ath_buf *bf; 1792 1793 ATH_TXBUF_LOCK_ASSERT(sc); 1794 1795 bf = STAILQ_FIRST(&sc->sc_txbuf); 1796 if (bf != NULL && (bf->bf_flags & ATH_BUF_BUSY) == 0) 1797 STAILQ_REMOVE_HEAD(&sc->sc_txbuf, bf_list); 1798 else 1799 bf = NULL; 1800 if (bf == NULL) { 1801 DPRINTF(sc, ATH_DEBUG_XMIT, "%s: %s\n", __func__, 1802 STAILQ_FIRST(&sc->sc_txbuf) == NULL ? 1803 "out of xmit buffers" : "xmit buffer busy"); 1804 } 1805 return bf; 1806} 1807 1808struct ath_buf * 1809ath_getbuf(struct ath_softc *sc) 1810{ 1811 struct ath_buf *bf; 1812 1813 ATH_TXBUF_LOCK(sc); 1814 bf = _ath_getbuf_locked(sc); 1815 if (bf == NULL) { 1816 struct ifnet *ifp = sc->sc_ifp; 1817 1818 DPRINTF(sc, ATH_DEBUG_XMIT, "%s: stop queue\n", __func__); 1819 sc->sc_stats.ast_tx_qstop++; 1820 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1821 } 1822 ATH_TXBUF_UNLOCK(sc); 1823 return bf; 1824} 1825 1826static void 1827ath_start(struct ifnet *ifp) 1828{ 1829 struct ath_softc *sc = ifp->if_softc; 1830 struct ieee80211_node *ni; 1831 struct ath_buf *bf; 1832 struct mbuf *m, *next; 1833 ath_bufhead frags; 1834 1835 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 || sc->sc_invalid) 1836 return; 1837 for (;;) { 1838 /* 1839 * Grab a TX buffer and associated resources. 1840 */ 1841 bf = ath_getbuf(sc); 1842 if (bf == NULL) 1843 break; 1844 1845 IFQ_DEQUEUE(&ifp->if_snd, m); 1846 if (m == NULL) { 1847 ATH_TXBUF_LOCK(sc); 1848 STAILQ_INSERT_HEAD(&sc->sc_txbuf, bf, bf_list); 1849 ATH_TXBUF_UNLOCK(sc); 1850 break; 1851 } 1852 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1853 /* 1854 * Check for fragmentation. If this frame 1855 * has been broken up verify we have enough 1856 * buffers to send all the fragments so all 1857 * go out or none... 1858 */ 1859 STAILQ_INIT(&frags); 1860 if ((m->m_flags & M_FRAG) && 1861 !ath_txfrag_setup(sc, &frags, m, ni)) { 1862 DPRINTF(sc, ATH_DEBUG_XMIT, 1863 "%s: out of txfrag buffers\n", __func__); 1864 sc->sc_stats.ast_tx_nofrag++; 1865 ifp->if_oerrors++; 1866 ath_freetx(m); 1867 goto bad; 1868 } 1869 ifp->if_opackets++; 1870 nextfrag: 1871 /* 1872 * Pass the frame to the h/w for transmission. 1873 * Fragmented frames have each frag chained together 1874 * with m_nextpkt. We know there are sufficient ath_buf's 1875 * to send all the frags because of work done by 1876 * ath_txfrag_setup. We leave m_nextpkt set while 1877 * calling ath_tx_start so it can use it to extend the 1878 * the tx duration to cover the subsequent frag and 1879 * so it can reclaim all the mbufs in case of an error; 1880 * ath_tx_start clears m_nextpkt once it commits to 1881 * handing the frame to the hardware. 1882 */ 1883 next = m->m_nextpkt; 1884 if (ath_tx_start(sc, ni, bf, m)) { 1885 bad: 1886 ifp->if_oerrors++; 1887 reclaim: 1888 bf->bf_m = NULL; 1889 bf->bf_node = NULL; 1890 ATH_TXBUF_LOCK(sc); 1891 STAILQ_INSERT_HEAD(&sc->sc_txbuf, bf, bf_list); 1892 ath_txfrag_cleanup(sc, &frags, ni); 1893 ATH_TXBUF_UNLOCK(sc); 1894 if (ni != NULL) 1895 ieee80211_free_node(ni); 1896 continue; 1897 } 1898 if (next != NULL) { 1899 /* 1900 * Beware of state changing between frags. 1901 * XXX check sta power-save state? 1902 */ 1903 if (ni->ni_vap->iv_state != IEEE80211_S_RUN) { 1904 DPRINTF(sc, ATH_DEBUG_XMIT, 1905 "%s: flush fragmented packet, state %s\n", 1906 __func__, 1907 ieee80211_state_name[ni->ni_vap->iv_state]); 1908 ath_freetx(next); 1909 goto reclaim; 1910 } 1911 m = next; 1912 bf = STAILQ_FIRST(&frags); 1913 KASSERT(bf != NULL, ("no buf for txfrag")); 1914 STAILQ_REMOVE_HEAD(&frags, bf_list); 1915 goto nextfrag; 1916 } 1917 1918 sc->sc_wd_timer = 5; 1919 } 1920} 1921 1922static int 1923ath_media_change(struct ifnet *ifp) 1924{ 1925 int error = ieee80211_media_change(ifp); 1926 /* NB: only the fixed rate can change and that doesn't need a reset */ 1927 return (error == ENETRESET ? 0 : error); 1928} 1929 1930/* 1931 * Block/unblock tx+rx processing while a key change is done. 1932 * We assume the caller serializes key management operations 1933 * so we only need to worry about synchronization with other 1934 * uses that originate in the driver. 1935 */ 1936static void 1937ath_key_update_begin(struct ieee80211vap *vap) 1938{ 1939 struct ifnet *ifp = vap->iv_ic->ic_ifp; 1940 struct ath_softc *sc = ifp->if_softc; 1941 1942 DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s:\n", __func__); 1943 taskqueue_block(sc->sc_tq); 1944 IF_LOCK(&ifp->if_snd); /* NB: doesn't block mgmt frames */ 1945} 1946 1947static void 1948ath_key_update_end(struct ieee80211vap *vap) 1949{ 1950 struct ifnet *ifp = vap->iv_ic->ic_ifp; 1951 struct ath_softc *sc = ifp->if_softc; 1952 1953 DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s:\n", __func__); 1954 IF_UNLOCK(&ifp->if_snd); 1955 taskqueue_unblock(sc->sc_tq); 1956} 1957 1958/* 1959 * Calculate the receive filter according to the 1960 * operating mode and state: 1961 * 1962 * o always accept unicast, broadcast, and multicast traffic 1963 * o accept PHY error frames when hardware doesn't have MIB support 1964 * to count and we need them for ANI (sta mode only until recently) 1965 * and we are not scanning (ANI is disabled) 1966 * NB: older hal's add rx filter bits out of sight and we need to 1967 * blindly preserve them 1968 * o probe request frames are accepted only when operating in 1969 * hostap, adhoc, mesh, or monitor modes 1970 * o enable promiscuous mode 1971 * - when in monitor mode 1972 * - if interface marked PROMISC (assumes bridge setting is filtered) 1973 * o accept beacons: 1974 * - when operating in station mode for collecting rssi data when 1975 * the station is otherwise quiet, or 1976 * - when operating in adhoc mode so the 802.11 layer creates 1977 * node table entries for peers, 1978 * - when scanning 1979 * - when doing s/w beacon miss (e.g. for ap+sta) 1980 * - when operating in ap mode in 11g to detect overlapping bss that 1981 * require protection 1982 * - when operating in mesh mode to detect neighbors 1983 * o accept control frames: 1984 * - when in monitor mode 1985 * XXX HT protection for 11n 1986 */ 1987static u_int32_t 1988ath_calcrxfilter(struct ath_softc *sc) 1989{ 1990 struct ifnet *ifp = sc->sc_ifp; 1991 struct ieee80211com *ic = ifp->if_l2com; 1992 u_int32_t rfilt; 1993 1994 rfilt = HAL_RX_FILTER_UCAST | HAL_RX_FILTER_BCAST | HAL_RX_FILTER_MCAST; 1995 if (!sc->sc_needmib && !sc->sc_scanning) 1996 rfilt |= HAL_RX_FILTER_PHYERR; 1997 if (ic->ic_opmode != IEEE80211_M_STA) 1998 rfilt |= HAL_RX_FILTER_PROBEREQ; 1999 /* XXX ic->ic_monvaps != 0? */ 2000 if (ic->ic_opmode == IEEE80211_M_MONITOR || (ifp->if_flags & IFF_PROMISC)) 2001 rfilt |= HAL_RX_FILTER_PROM; 2002 if (ic->ic_opmode == IEEE80211_M_STA || 2003 ic->ic_opmode == IEEE80211_M_IBSS || 2004 sc->sc_swbmiss || sc->sc_scanning) 2005 rfilt |= HAL_RX_FILTER_BEACON; 2006 /* 2007 * NB: We don't recalculate the rx filter when 2008 * ic_protmode changes; otherwise we could do 2009 * this only when ic_protmode != NONE. 2010 */ 2011 if (ic->ic_opmode == IEEE80211_M_HOSTAP && 2012 IEEE80211_IS_CHAN_ANYG(ic->ic_curchan)) 2013 rfilt |= HAL_RX_FILTER_BEACON; 2014 2015 /* 2016 * Enable hardware PS-POLL RX only for hostap mode; 2017 * STA mode sends PS-POLL frames but never 2018 * receives them. 2019 */ 2020 if (ath_hal_getcapability(sc->sc_ah, HAL_CAP_PSPOLL, 2021 0, NULL) == HAL_OK && 2022 ic->ic_opmode == IEEE80211_M_HOSTAP) 2023 rfilt |= HAL_RX_FILTER_PSPOLL; 2024 2025 if (sc->sc_nmeshvaps) { 2026 rfilt |= HAL_RX_FILTER_BEACON; 2027 if (sc->sc_hasbmatch) 2028 rfilt |= HAL_RX_FILTER_BSSID; 2029 else 2030 rfilt |= HAL_RX_FILTER_PROM; 2031 } 2032 if (ic->ic_opmode == IEEE80211_M_MONITOR) 2033 rfilt |= HAL_RX_FILTER_CONTROL; 2034 2035 if (sc->sc_dodfs) { 2036 rfilt |= HAL_RX_FILTER_PHYRADAR; 2037 } 2038 2039 /* 2040 * Enable RX of compressed BAR frames only when doing 2041 * 802.11n. Required for A-MPDU. 2042 */ 2043 if (IEEE80211_IS_CHAN_HT(ic->ic_curchan)) 2044 rfilt |= HAL_RX_FILTER_COMPBAR; 2045 2046 DPRINTF(sc, ATH_DEBUG_MODE, "%s: RX filter 0x%x, %s if_flags 0x%x\n", 2047 __func__, rfilt, ieee80211_opmode_name[ic->ic_opmode], ifp->if_flags); 2048 return rfilt; 2049} 2050 2051static void 2052ath_update_promisc(struct ifnet *ifp) 2053{ 2054 struct ath_softc *sc = ifp->if_softc; 2055 u_int32_t rfilt; 2056 2057 /* configure rx filter */ 2058 rfilt = ath_calcrxfilter(sc); 2059 ath_hal_setrxfilter(sc->sc_ah, rfilt); 2060 2061 DPRINTF(sc, ATH_DEBUG_MODE, "%s: RX filter 0x%x\n", __func__, rfilt); 2062} 2063 2064static void 2065ath_update_mcast(struct ifnet *ifp) 2066{ 2067 struct ath_softc *sc = ifp->if_softc; 2068 u_int32_t mfilt[2]; 2069 2070 /* calculate and install multicast filter */ 2071 if ((ifp->if_flags & IFF_ALLMULTI) == 0) { 2072 struct ifmultiaddr *ifma; 2073 /* 2074 * Merge multicast addresses to form the hardware filter. 2075 */ 2076 mfilt[0] = mfilt[1] = 0; 2077 if_maddr_rlock(ifp); /* XXX need some fiddling to remove? */ 2078 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 2079 caddr_t dl; 2080 u_int32_t val; 2081 u_int8_t pos; 2082 2083 /* calculate XOR of eight 6bit values */ 2084 dl = LLADDR((struct sockaddr_dl *) ifma->ifma_addr); 2085 val = LE_READ_4(dl + 0); 2086 pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; 2087 val = LE_READ_4(dl + 3); 2088 pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; 2089 pos &= 0x3f; 2090 mfilt[pos / 32] |= (1 << (pos % 32)); 2091 } 2092 if_maddr_runlock(ifp); 2093 } else 2094 mfilt[0] = mfilt[1] = ~0; 2095 ath_hal_setmcastfilter(sc->sc_ah, mfilt[0], mfilt[1]); 2096 DPRINTF(sc, ATH_DEBUG_MODE, "%s: MC filter %08x:%08x\n", 2097 __func__, mfilt[0], mfilt[1]); 2098} 2099 2100static void 2101ath_mode_init(struct ath_softc *sc) 2102{ 2103 struct ifnet *ifp = sc->sc_ifp; 2104 struct ath_hal *ah = sc->sc_ah; 2105 u_int32_t rfilt; 2106 2107 /* configure rx filter */ 2108 rfilt = ath_calcrxfilter(sc); 2109 ath_hal_setrxfilter(ah, rfilt); 2110 2111 /* configure operational mode */ 2112 ath_hal_setopmode(ah); 2113 2114 /* handle any link-level address change */ 2115 ath_hal_setmac(ah, IF_LLADDR(ifp)); 2116 2117 /* calculate and install multicast filter */ 2118 ath_update_mcast(ifp); 2119} 2120 2121/* 2122 * Set the slot time based on the current setting. 2123 */ 2124static void 2125ath_setslottime(struct ath_softc *sc) 2126{ 2127 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 2128 struct ath_hal *ah = sc->sc_ah; 2129 u_int usec; 2130 2131 if (IEEE80211_IS_CHAN_HALF(ic->ic_curchan)) 2132 usec = 13; 2133 else if (IEEE80211_IS_CHAN_QUARTER(ic->ic_curchan)) 2134 usec = 21; 2135 else if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan)) { 2136 /* honor short/long slot time only in 11g */ 2137 /* XXX shouldn't honor on pure g or turbo g channel */ 2138 if (ic->ic_flags & IEEE80211_F_SHSLOT) 2139 usec = HAL_SLOT_TIME_9; 2140 else 2141 usec = HAL_SLOT_TIME_20; 2142 } else 2143 usec = HAL_SLOT_TIME_9; 2144 2145 DPRINTF(sc, ATH_DEBUG_RESET, 2146 "%s: chan %u MHz flags 0x%x %s slot, %u usec\n", 2147 __func__, ic->ic_curchan->ic_freq, ic->ic_curchan->ic_flags, 2148 ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long", usec); 2149 2150 ath_hal_setslottime(ah, usec); 2151 sc->sc_updateslot = OK; 2152} 2153 2154/* 2155 * Callback from the 802.11 layer to update the 2156 * slot time based on the current setting. 2157 */ 2158static void 2159ath_updateslot(struct ifnet *ifp) 2160{ 2161 struct ath_softc *sc = ifp->if_softc; 2162 struct ieee80211com *ic = ifp->if_l2com; 2163 2164 /* 2165 * When not coordinating the BSS, change the hardware 2166 * immediately. For other operation we defer the change 2167 * until beacon updates have propagated to the stations. 2168 */ 2169 if (ic->ic_opmode == IEEE80211_M_HOSTAP || 2170 ic->ic_opmode == IEEE80211_M_MBSS) 2171 sc->sc_updateslot = UPDATE; 2172 else 2173 ath_setslottime(sc); 2174} 2175 2176/* 2177 * Setup a h/w transmit queue for beacons. 2178 */ 2179static int 2180ath_beaconq_setup(struct ath_hal *ah) 2181{ 2182 HAL_TXQ_INFO qi; 2183 2184 memset(&qi, 0, sizeof(qi)); 2185 qi.tqi_aifs = HAL_TXQ_USEDEFAULT; 2186 qi.tqi_cwmin = HAL_TXQ_USEDEFAULT; 2187 qi.tqi_cwmax = HAL_TXQ_USEDEFAULT; 2188 /* NB: for dynamic turbo, don't enable any other interrupts */ 2189 qi.tqi_qflags = HAL_TXQ_TXDESCINT_ENABLE; 2190 return ath_hal_setuptxqueue(ah, HAL_TX_QUEUE_BEACON, &qi); 2191} 2192 2193/* 2194 * Setup the transmit queue parameters for the beacon queue. 2195 */ 2196static int 2197ath_beaconq_config(struct ath_softc *sc) 2198{ 2199#define ATH_EXPONENT_TO_VALUE(v) ((1<<(v))-1) 2200 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 2201 struct ath_hal *ah = sc->sc_ah; 2202 HAL_TXQ_INFO qi; 2203 2204 ath_hal_gettxqueueprops(ah, sc->sc_bhalq, &qi); 2205 if (ic->ic_opmode == IEEE80211_M_HOSTAP || 2206 ic->ic_opmode == IEEE80211_M_MBSS) { 2207 /* 2208 * Always burst out beacon and CAB traffic. 2209 */ 2210 qi.tqi_aifs = ATH_BEACON_AIFS_DEFAULT; 2211 qi.tqi_cwmin = ATH_BEACON_CWMIN_DEFAULT; 2212 qi.tqi_cwmax = ATH_BEACON_CWMAX_DEFAULT; 2213 } else { 2214 struct wmeParams *wmep = 2215 &ic->ic_wme.wme_chanParams.cap_wmeParams[WME_AC_BE]; 2216 /* 2217 * Adhoc mode; important thing is to use 2x cwmin. 2218 */ 2219 qi.tqi_aifs = wmep->wmep_aifsn; 2220 qi.tqi_cwmin = 2*ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin); 2221 qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax); 2222 } 2223 2224 if (!ath_hal_settxqueueprops(ah, sc->sc_bhalq, &qi)) { 2225 device_printf(sc->sc_dev, "unable to update parameters for " 2226 "beacon hardware queue!\n"); 2227 return 0; 2228 } else { 2229 ath_hal_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */ 2230 return 1; 2231 } 2232#undef ATH_EXPONENT_TO_VALUE 2233} 2234 2235/* 2236 * Allocate and setup an initial beacon frame. 2237 */ 2238static int 2239ath_beacon_alloc(struct ath_softc *sc, struct ieee80211_node *ni) 2240{ 2241 struct ieee80211vap *vap = ni->ni_vap; 2242 struct ath_vap *avp = ATH_VAP(vap); 2243 struct ath_buf *bf; 2244 struct mbuf *m; 2245 int error; 2246 2247 bf = avp->av_bcbuf; 2248 if (bf->bf_m != NULL) { 2249 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 2250 m_freem(bf->bf_m); 2251 bf->bf_m = NULL; 2252 } 2253 if (bf->bf_node != NULL) { 2254 ieee80211_free_node(bf->bf_node); 2255 bf->bf_node = NULL; 2256 } 2257 2258 /* 2259 * NB: the beacon data buffer must be 32-bit aligned; 2260 * we assume the mbuf routines will return us something 2261 * with this alignment (perhaps should assert). 2262 */ 2263 m = ieee80211_beacon_alloc(ni, &avp->av_boff); 2264 if (m == NULL) { 2265 device_printf(sc->sc_dev, "%s: cannot get mbuf\n", __func__); 2266 sc->sc_stats.ast_be_nombuf++; 2267 return ENOMEM; 2268 } 2269 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m, 2270 bf->bf_segs, &bf->bf_nseg, 2271 BUS_DMA_NOWAIT); 2272 if (error != 0) { 2273 device_printf(sc->sc_dev, 2274 "%s: cannot map mbuf, bus_dmamap_load_mbuf_sg returns %d\n", 2275 __func__, error); 2276 m_freem(m); 2277 return error; 2278 } 2279 2280 /* 2281 * Calculate a TSF adjustment factor required for staggered 2282 * beacons. Note that we assume the format of the beacon 2283 * frame leaves the tstamp field immediately following the 2284 * header. 2285 */ 2286 if (sc->sc_stagbeacons && avp->av_bslot > 0) { 2287 uint64_t tsfadjust; 2288 struct ieee80211_frame *wh; 2289 2290 /* 2291 * The beacon interval is in TU's; the TSF is in usecs. 2292 * We figure out how many TU's to add to align the timestamp 2293 * then convert to TSF units and handle byte swapping before 2294 * inserting it in the frame. The hardware will then add this 2295 * each time a beacon frame is sent. Note that we align vap's 2296 * 1..N and leave vap 0 untouched. This means vap 0 has a 2297 * timestamp in one beacon interval while the others get a 2298 * timstamp aligned to the next interval. 2299 */ 2300 tsfadjust = ni->ni_intval * 2301 (ATH_BCBUF - avp->av_bslot) / ATH_BCBUF; 2302 tsfadjust = htole64(tsfadjust << 10); /* TU -> TSF */ 2303 2304 DPRINTF(sc, ATH_DEBUG_BEACON, 2305 "%s: %s beacons bslot %d intval %u tsfadjust %llu\n", 2306 __func__, sc->sc_stagbeacons ? "stagger" : "burst", 2307 avp->av_bslot, ni->ni_intval, 2308 (long long unsigned) le64toh(tsfadjust)); 2309 2310 wh = mtod(m, struct ieee80211_frame *); 2311 memcpy(&wh[1], &tsfadjust, sizeof(tsfadjust)); 2312 } 2313 bf->bf_m = m; 2314 bf->bf_node = ieee80211_ref_node(ni); 2315 2316 return 0; 2317} 2318 2319/* 2320 * Setup the beacon frame for transmit. 2321 */ 2322static void 2323ath_beacon_setup(struct ath_softc *sc, struct ath_buf *bf) 2324{ 2325#define USE_SHPREAMBLE(_ic) \ 2326 (((_ic)->ic_flags & (IEEE80211_F_SHPREAMBLE | IEEE80211_F_USEBARKER))\ 2327 == IEEE80211_F_SHPREAMBLE) 2328 struct ieee80211_node *ni = bf->bf_node; 2329 struct ieee80211com *ic = ni->ni_ic; 2330 struct mbuf *m = bf->bf_m; 2331 struct ath_hal *ah = sc->sc_ah; 2332 struct ath_desc *ds; 2333 int flags, antenna; 2334 const HAL_RATE_TABLE *rt; 2335 u_int8_t rix, rate; 2336 2337 DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: m %p len %u\n", 2338 __func__, m, m->m_len); 2339 2340 /* setup descriptors */ 2341 ds = bf->bf_desc; 2342 2343 flags = HAL_TXDESC_NOACK; 2344 if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol) { 2345 ds->ds_link = bf->bf_daddr; /* self-linked */ 2346 flags |= HAL_TXDESC_VEOL; 2347 /* 2348 * Let hardware handle antenna switching. 2349 */ 2350 antenna = sc->sc_txantenna; 2351 } else { 2352 ds->ds_link = 0; 2353 /* 2354 * Switch antenna every 4 beacons. 2355 * XXX assumes two antenna 2356 */ 2357 if (sc->sc_txantenna != 0) 2358 antenna = sc->sc_txantenna; 2359 else if (sc->sc_stagbeacons && sc->sc_nbcnvaps != 0) 2360 antenna = ((sc->sc_stats.ast_be_xmit / sc->sc_nbcnvaps) & 4 ? 2 : 1); 2361 else 2362 antenna = (sc->sc_stats.ast_be_xmit & 4 ? 2 : 1); 2363 } 2364 2365 KASSERT(bf->bf_nseg == 1, 2366 ("multi-segment beacon frame; nseg %u", bf->bf_nseg)); 2367 ds->ds_data = bf->bf_segs[0].ds_addr; 2368 /* 2369 * Calculate rate code. 2370 * XXX everything at min xmit rate 2371 */ 2372 rix = 0; 2373 rt = sc->sc_currates; 2374 rate = rt->info[rix].rateCode; 2375 if (USE_SHPREAMBLE(ic)) 2376 rate |= rt->info[rix].shortPreamble; 2377 ath_hal_setuptxdesc(ah, ds 2378 , m->m_len + IEEE80211_CRC_LEN /* frame length */ 2379 , sizeof(struct ieee80211_frame)/* header length */ 2380 , HAL_PKT_TYPE_BEACON /* Atheros packet type */ 2381 , ni->ni_txpower /* txpower XXX */ 2382 , rate, 1 /* series 0 rate/tries */ 2383 , HAL_TXKEYIX_INVALID /* no encryption */ 2384 , antenna /* antenna mode */ 2385 , flags /* no ack, veol for beacons */ 2386 , 0 /* rts/cts rate */ 2387 , 0 /* rts/cts duration */ 2388 ); 2389 /* NB: beacon's BufLen must be a multiple of 4 bytes */ 2390 ath_hal_filltxdesc(ah, ds 2391 , roundup(m->m_len, 4) /* buffer length */ 2392 , AH_TRUE /* first segment */ 2393 , AH_TRUE /* last segment */ 2394 , ds /* first descriptor */ 2395 ); 2396#if 0 2397 ath_desc_swap(ds); 2398#endif 2399#undef USE_SHPREAMBLE 2400} 2401 2402static void 2403ath_beacon_update(struct ieee80211vap *vap, int item) 2404{ 2405 struct ieee80211_beacon_offsets *bo = &ATH_VAP(vap)->av_boff; 2406 2407 setbit(bo->bo_flags, item); 2408} 2409 2410/* 2411 * Append the contents of src to dst; both queues 2412 * are assumed to be locked. 2413 */ 2414static void 2415ath_txqmove(struct ath_txq *dst, struct ath_txq *src) 2416{ 2417 STAILQ_CONCAT(&dst->axq_q, &src->axq_q); 2418 dst->axq_link = src->axq_link; 2419 src->axq_link = NULL; 2420 dst->axq_depth += src->axq_depth; 2421 src->axq_depth = 0; 2422} 2423 2424/* 2425 * Transmit a beacon frame at SWBA. Dynamic updates to the 2426 * frame contents are done as needed and the slot time is 2427 * also adjusted based on current state. 2428 */ 2429static void 2430ath_beacon_proc(void *arg, int pending) 2431{ 2432 struct ath_softc *sc = arg; 2433 struct ath_hal *ah = sc->sc_ah; 2434 struct ieee80211vap *vap; 2435 struct ath_buf *bf; 2436 int slot, otherant; 2437 uint32_t bfaddr; 2438 2439 DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: pending %u\n", 2440 __func__, pending); 2441 /* 2442 * Check if the previous beacon has gone out. If 2443 * not don't try to post another, skip this period 2444 * and wait for the next. Missed beacons indicate 2445 * a problem and should not occur. If we miss too 2446 * many consecutive beacons reset the device. 2447 */ 2448 if (ath_hal_numtxpending(ah, sc->sc_bhalq) != 0) { 2449 sc->sc_bmisscount++; 2450 sc->sc_stats.ast_be_missed++; 2451 DPRINTF(sc, ATH_DEBUG_BEACON, 2452 "%s: missed %u consecutive beacons\n", 2453 __func__, sc->sc_bmisscount); 2454 if (sc->sc_bmisscount >= ath_bstuck_threshold) 2455 taskqueue_enqueue(sc->sc_tq, &sc->sc_bstucktask); 2456 return; 2457 } 2458 if (sc->sc_bmisscount != 0) { 2459 DPRINTF(sc, ATH_DEBUG_BEACON, 2460 "%s: resume beacon xmit after %u misses\n", 2461 __func__, sc->sc_bmisscount); 2462 sc->sc_bmisscount = 0; 2463 } 2464 2465 if (sc->sc_stagbeacons) { /* staggered beacons */ 2466 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 2467 uint32_t tsftu; 2468 2469 tsftu = ath_hal_gettsf32(ah) >> 10; 2470 /* XXX lintval */ 2471 slot = ((tsftu % ic->ic_lintval) * ATH_BCBUF) / ic->ic_lintval; 2472 vap = sc->sc_bslot[(slot+1) % ATH_BCBUF]; 2473 bfaddr = 0; 2474 if (vap != NULL && vap->iv_state >= IEEE80211_S_RUN) { 2475 bf = ath_beacon_generate(sc, vap); 2476 if (bf != NULL) 2477 bfaddr = bf->bf_daddr; 2478 } 2479 } else { /* burst'd beacons */ 2480 uint32_t *bflink = &bfaddr; 2481 2482 for (slot = 0; slot < ATH_BCBUF; slot++) { 2483 vap = sc->sc_bslot[slot]; 2484 if (vap != NULL && vap->iv_state >= IEEE80211_S_RUN) { 2485 bf = ath_beacon_generate(sc, vap); 2486 if (bf != NULL) { 2487 *bflink = bf->bf_daddr; 2488 bflink = &bf->bf_desc->ds_link; 2489 } 2490 } 2491 } 2492 *bflink = 0; /* terminate list */ 2493 } 2494 2495 /* 2496 * Handle slot time change when a non-ERP station joins/leaves 2497 * an 11g network. The 802.11 layer notifies us via callback, 2498 * we mark updateslot, then wait one beacon before effecting 2499 * the change. This gives associated stations at least one 2500 * beacon interval to note the state change. 2501 */ 2502 /* XXX locking */ 2503 if (sc->sc_updateslot == UPDATE) { 2504 sc->sc_updateslot = COMMIT; /* commit next beacon */ 2505 sc->sc_slotupdate = slot; 2506 } else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot) 2507 ath_setslottime(sc); /* commit change to h/w */ 2508 2509 /* 2510 * Check recent per-antenna transmit statistics and flip 2511 * the default antenna if noticeably more frames went out 2512 * on the non-default antenna. 2513 * XXX assumes 2 anntenae 2514 */ 2515 if (!sc->sc_diversity && (!sc->sc_stagbeacons || slot == 0)) { 2516 otherant = sc->sc_defant & 1 ? 2 : 1; 2517 if (sc->sc_ant_tx[otherant] > sc->sc_ant_tx[sc->sc_defant] + 2) 2518 ath_setdefantenna(sc, otherant); 2519 sc->sc_ant_tx[1] = sc->sc_ant_tx[2] = 0; 2520 } 2521 2522 if (bfaddr != 0) { 2523 /* 2524 * Stop any current dma and put the new frame on the queue. 2525 * This should never fail since we check above that no frames 2526 * are still pending on the queue. 2527 */ 2528 if (!ath_hal_stoptxdma(ah, sc->sc_bhalq)) { 2529 DPRINTF(sc, ATH_DEBUG_ANY, 2530 "%s: beacon queue %u did not stop?\n", 2531 __func__, sc->sc_bhalq); 2532 } 2533 /* NB: cabq traffic should already be queued and primed */ 2534 ath_hal_puttxbuf(ah, sc->sc_bhalq, bfaddr); 2535 ath_hal_txstart(ah, sc->sc_bhalq); 2536 2537 sc->sc_stats.ast_be_xmit++; 2538 } 2539} 2540 2541static struct ath_buf * 2542ath_beacon_generate(struct ath_softc *sc, struct ieee80211vap *vap) 2543{ 2544 struct ath_vap *avp = ATH_VAP(vap); 2545 struct ath_txq *cabq = sc->sc_cabq; 2546 struct ath_buf *bf; 2547 struct mbuf *m; 2548 int nmcastq, error; 2549 2550 KASSERT(vap->iv_state >= IEEE80211_S_RUN, 2551 ("not running, state %d", vap->iv_state)); 2552 KASSERT(avp->av_bcbuf != NULL, ("no beacon buffer")); 2553 2554 /* 2555 * Update dynamic beacon contents. If this returns 2556 * non-zero then we need to remap the memory because 2557 * the beacon frame changed size (probably because 2558 * of the TIM bitmap). 2559 */ 2560 bf = avp->av_bcbuf; 2561 m = bf->bf_m; 2562 nmcastq = avp->av_mcastq.axq_depth; 2563 if (ieee80211_beacon_update(bf->bf_node, &avp->av_boff, m, nmcastq)) { 2564 /* XXX too conservative? */ 2565 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 2566 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m, 2567 bf->bf_segs, &bf->bf_nseg, 2568 BUS_DMA_NOWAIT); 2569 if (error != 0) { 2570 if_printf(vap->iv_ifp, 2571 "%s: bus_dmamap_load_mbuf_sg failed, error %u\n", 2572 __func__, error); 2573 return NULL; 2574 } 2575 } 2576 if ((avp->av_boff.bo_tim[4] & 1) && cabq->axq_depth) { 2577 DPRINTF(sc, ATH_DEBUG_BEACON, 2578 "%s: cabq did not drain, mcastq %u cabq %u\n", 2579 __func__, nmcastq, cabq->axq_depth); 2580 sc->sc_stats.ast_cabq_busy++; 2581 if (sc->sc_nvaps > 1 && sc->sc_stagbeacons) { 2582 /* 2583 * CABQ traffic from a previous vap is still pending. 2584 * We must drain the q before this beacon frame goes 2585 * out as otherwise this vap's stations will get cab 2586 * frames from a different vap. 2587 * XXX could be slow causing us to miss DBA 2588 */ 2589 ath_tx_draintxq(sc, cabq); 2590 } 2591 } 2592 ath_beacon_setup(sc, bf); 2593 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE); 2594 2595 /* 2596 * Enable the CAB queue before the beacon queue to 2597 * insure cab frames are triggered by this beacon. 2598 */ 2599 if (avp->av_boff.bo_tim[4] & 1) { 2600 struct ath_hal *ah = sc->sc_ah; 2601 2602 /* NB: only at DTIM */ 2603 ATH_TXQ_LOCK(cabq); 2604 ATH_TXQ_LOCK(&avp->av_mcastq); 2605 if (nmcastq) { 2606 struct ath_buf *bfm; 2607 2608 /* 2609 * Move frames from the s/w mcast q to the h/w cab q. 2610 * XXX MORE_DATA bit 2611 */ 2612 bfm = STAILQ_FIRST(&avp->av_mcastq.axq_q); 2613 if (cabq->axq_link != NULL) { 2614 *cabq->axq_link = bfm->bf_daddr; 2615 } else 2616 ath_hal_puttxbuf(ah, cabq->axq_qnum, 2617 bfm->bf_daddr); 2618 ath_txqmove(cabq, &avp->av_mcastq); 2619 2620 sc->sc_stats.ast_cabq_xmit += nmcastq; 2621 } 2622 /* NB: gated by beacon so safe to start here */ 2623 ath_hal_txstart(ah, cabq->axq_qnum); 2624 ATH_TXQ_UNLOCK(cabq); 2625 ATH_TXQ_UNLOCK(&avp->av_mcastq); 2626 } 2627 return bf; 2628} 2629 2630static void 2631ath_beacon_start_adhoc(struct ath_softc *sc, struct ieee80211vap *vap) 2632{ 2633 struct ath_vap *avp = ATH_VAP(vap); 2634 struct ath_hal *ah = sc->sc_ah; 2635 struct ath_buf *bf; 2636 struct mbuf *m; 2637 int error; 2638 2639 KASSERT(avp->av_bcbuf != NULL, ("no beacon buffer")); 2640 2641 /* 2642 * Update dynamic beacon contents. If this returns 2643 * non-zero then we need to remap the memory because 2644 * the beacon frame changed size (probably because 2645 * of the TIM bitmap). 2646 */ 2647 bf = avp->av_bcbuf; 2648 m = bf->bf_m; 2649 if (ieee80211_beacon_update(bf->bf_node, &avp->av_boff, m, 0)) { 2650 /* XXX too conservative? */ 2651 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 2652 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m, 2653 bf->bf_segs, &bf->bf_nseg, 2654 BUS_DMA_NOWAIT); 2655 if (error != 0) { 2656 if_printf(vap->iv_ifp, 2657 "%s: bus_dmamap_load_mbuf_sg failed, error %u\n", 2658 __func__, error); 2659 return; 2660 } 2661 } 2662 ath_beacon_setup(sc, bf); 2663 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE); 2664 2665 /* NB: caller is known to have already stopped tx dma */ 2666 ath_hal_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr); 2667 ath_hal_txstart(ah, sc->sc_bhalq); 2668} 2669 2670/* 2671 * Reset the hardware after detecting beacons have stopped. 2672 */ 2673static void 2674ath_bstuck_proc(void *arg, int pending) 2675{ 2676 struct ath_softc *sc = arg; 2677 struct ifnet *ifp = sc->sc_ifp; 2678 2679 if_printf(ifp, "stuck beacon; resetting (bmiss count %u)\n", 2680 sc->sc_bmisscount); 2681 sc->sc_stats.ast_bstuck++; 2682 ath_reset(ifp); 2683} 2684 2685/* 2686 * Reclaim beacon resources and return buffer to the pool. 2687 */ 2688static void 2689ath_beacon_return(struct ath_softc *sc, struct ath_buf *bf) 2690{ 2691 2692 if (bf->bf_m != NULL) { 2693 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 2694 m_freem(bf->bf_m); 2695 bf->bf_m = NULL; 2696 } 2697 if (bf->bf_node != NULL) { 2698 ieee80211_free_node(bf->bf_node); 2699 bf->bf_node = NULL; 2700 } 2701 STAILQ_INSERT_TAIL(&sc->sc_bbuf, bf, bf_list); 2702} 2703 2704/* 2705 * Reclaim beacon resources. 2706 */ 2707static void 2708ath_beacon_free(struct ath_softc *sc) 2709{ 2710 struct ath_buf *bf; 2711 2712 STAILQ_FOREACH(bf, &sc->sc_bbuf, bf_list) { 2713 if (bf->bf_m != NULL) { 2714 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 2715 m_freem(bf->bf_m); 2716 bf->bf_m = NULL; 2717 } 2718 if (bf->bf_node != NULL) { 2719 ieee80211_free_node(bf->bf_node); 2720 bf->bf_node = NULL; 2721 } 2722 } 2723} 2724 2725/* 2726 * Configure the beacon and sleep timers. 2727 * 2728 * When operating as an AP this resets the TSF and sets 2729 * up the hardware to notify us when we need to issue beacons. 2730 * 2731 * When operating in station mode this sets up the beacon 2732 * timers according to the timestamp of the last received 2733 * beacon and the current TSF, configures PCF and DTIM 2734 * handling, programs the sleep registers so the hardware 2735 * will wakeup in time to receive beacons, and configures 2736 * the beacon miss handling so we'll receive a BMISS 2737 * interrupt when we stop seeing beacons from the AP 2738 * we've associated with. 2739 */ 2740static void 2741ath_beacon_config(struct ath_softc *sc, struct ieee80211vap *vap) 2742{ 2743#define TSF_TO_TU(_h,_l) \ 2744 ((((u_int32_t)(_h)) << 22) | (((u_int32_t)(_l)) >> 10)) 2745#define FUDGE 2 2746 struct ath_hal *ah = sc->sc_ah; 2747 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 2748 struct ieee80211_node *ni; 2749 u_int32_t nexttbtt, intval, tsftu; 2750 u_int64_t tsf; 2751 2752 if (vap == NULL) 2753 vap = TAILQ_FIRST(&ic->ic_vaps); /* XXX */ 2754 ni = vap->iv_bss; 2755 2756 /* extract tstamp from last beacon and convert to TU */ 2757 nexttbtt = TSF_TO_TU(LE_READ_4(ni->ni_tstamp.data + 4), 2758 LE_READ_4(ni->ni_tstamp.data)); 2759 if (ic->ic_opmode == IEEE80211_M_HOSTAP || 2760 ic->ic_opmode == IEEE80211_M_MBSS) { 2761 /* 2762 * For multi-bss ap/mesh support beacons are either staggered 2763 * evenly over N slots or burst together. For the former 2764 * arrange for the SWBA to be delivered for each slot. 2765 * Slots that are not occupied will generate nothing. 2766 */ 2767 /* NB: the beacon interval is kept internally in TU's */ 2768 intval = ni->ni_intval & HAL_BEACON_PERIOD; 2769 if (sc->sc_stagbeacons) 2770 intval /= ATH_BCBUF; 2771 } else { 2772 /* NB: the beacon interval is kept internally in TU's */ 2773 intval = ni->ni_intval & HAL_BEACON_PERIOD; 2774 } 2775 if (nexttbtt == 0) /* e.g. for ap mode */ 2776 nexttbtt = intval; 2777 else if (intval) /* NB: can be 0 for monitor mode */ 2778 nexttbtt = roundup(nexttbtt, intval); 2779 DPRINTF(sc, ATH_DEBUG_BEACON, "%s: nexttbtt %u intval %u (%u)\n", 2780 __func__, nexttbtt, intval, ni->ni_intval); 2781 if (ic->ic_opmode == IEEE80211_M_STA && !sc->sc_swbmiss) { 2782 HAL_BEACON_STATE bs; 2783 int dtimperiod, dtimcount; 2784 int cfpperiod, cfpcount; 2785 2786 /* 2787 * Setup dtim and cfp parameters according to 2788 * last beacon we received (which may be none). 2789 */ 2790 dtimperiod = ni->ni_dtim_period; 2791 if (dtimperiod <= 0) /* NB: 0 if not known */ 2792 dtimperiod = 1; 2793 dtimcount = ni->ni_dtim_count; 2794 if (dtimcount >= dtimperiod) /* NB: sanity check */ 2795 dtimcount = 0; /* XXX? */ 2796 cfpperiod = 1; /* NB: no PCF support yet */ 2797 cfpcount = 0; 2798 /* 2799 * Pull nexttbtt forward to reflect the current 2800 * TSF and calculate dtim+cfp state for the result. 2801 */ 2802 tsf = ath_hal_gettsf64(ah); 2803 tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE; 2804 do { 2805 nexttbtt += intval; 2806 if (--dtimcount < 0) { 2807 dtimcount = dtimperiod - 1; 2808 if (--cfpcount < 0) 2809 cfpcount = cfpperiod - 1; 2810 } 2811 } while (nexttbtt < tsftu); 2812 memset(&bs, 0, sizeof(bs)); 2813 bs.bs_intval = intval; 2814 bs.bs_nexttbtt = nexttbtt; 2815 bs.bs_dtimperiod = dtimperiod*intval; 2816 bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval; 2817 bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; 2818 bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; 2819 bs.bs_cfpmaxduration = 0; 2820#if 0 2821 /* 2822 * The 802.11 layer records the offset to the DTIM 2823 * bitmap while receiving beacons; use it here to 2824 * enable h/w detection of our AID being marked in 2825 * the bitmap vector (to indicate frames for us are 2826 * pending at the AP). 2827 * XXX do DTIM handling in s/w to WAR old h/w bugs 2828 * XXX enable based on h/w rev for newer chips 2829 */ 2830 bs.bs_timoffset = ni->ni_timoff; 2831#endif 2832 /* 2833 * Calculate the number of consecutive beacons to miss 2834 * before taking a BMISS interrupt. 2835 * Note that we clamp the result to at most 10 beacons. 2836 */ 2837 bs.bs_bmissthreshold = vap->iv_bmissthreshold; 2838 if (bs.bs_bmissthreshold > 10) 2839 bs.bs_bmissthreshold = 10; 2840 else if (bs.bs_bmissthreshold <= 0) 2841 bs.bs_bmissthreshold = 1; 2842 2843 /* 2844 * Calculate sleep duration. The configuration is 2845 * given in ms. We insure a multiple of the beacon 2846 * period is used. Also, if the sleep duration is 2847 * greater than the DTIM period then it makes senses 2848 * to make it a multiple of that. 2849 * 2850 * XXX fixed at 100ms 2851 */ 2852 bs.bs_sleepduration = 2853 roundup(IEEE80211_MS_TO_TU(100), bs.bs_intval); 2854 if (bs.bs_sleepduration > bs.bs_dtimperiod) 2855 bs.bs_sleepduration = roundup(bs.bs_sleepduration, bs.bs_dtimperiod); 2856 2857 DPRINTF(sc, ATH_DEBUG_BEACON, 2858 "%s: tsf %ju tsf:tu %u intval %u nexttbtt %u dtim %u nextdtim %u bmiss %u sleep %u cfp:period %u maxdur %u next %u timoffset %u\n" 2859 , __func__ 2860 , tsf, tsftu 2861 , bs.bs_intval 2862 , bs.bs_nexttbtt 2863 , bs.bs_dtimperiod 2864 , bs.bs_nextdtim 2865 , bs.bs_bmissthreshold 2866 , bs.bs_sleepduration 2867 , bs.bs_cfpperiod 2868 , bs.bs_cfpmaxduration 2869 , bs.bs_cfpnext 2870 , bs.bs_timoffset 2871 ); 2872 ath_hal_intrset(ah, 0); 2873 ath_hal_beacontimers(ah, &bs); 2874 sc->sc_imask |= HAL_INT_BMISS; 2875 ath_hal_intrset(ah, sc->sc_imask); 2876 } else { 2877 ath_hal_intrset(ah, 0); 2878 if (nexttbtt == intval) 2879 intval |= HAL_BEACON_RESET_TSF; 2880 if (ic->ic_opmode == IEEE80211_M_IBSS) { 2881 /* 2882 * In IBSS mode enable the beacon timers but only 2883 * enable SWBA interrupts if we need to manually 2884 * prepare beacon frames. Otherwise we use a 2885 * self-linked tx descriptor and let the hardware 2886 * deal with things. 2887 */ 2888 intval |= HAL_BEACON_ENA; 2889 if (!sc->sc_hasveol) 2890 sc->sc_imask |= HAL_INT_SWBA; 2891 if ((intval & HAL_BEACON_RESET_TSF) == 0) { 2892 /* 2893 * Pull nexttbtt forward to reflect 2894 * the current TSF. 2895 */ 2896 tsf = ath_hal_gettsf64(ah); 2897 tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE; 2898 do { 2899 nexttbtt += intval; 2900 } while (nexttbtt < tsftu); 2901 } 2902 ath_beaconq_config(sc); 2903 } else if (ic->ic_opmode == IEEE80211_M_HOSTAP || 2904 ic->ic_opmode == IEEE80211_M_MBSS) { 2905 /* 2906 * In AP/mesh mode we enable the beacon timers 2907 * and SWBA interrupts to prepare beacon frames. 2908 */ 2909 intval |= HAL_BEACON_ENA; 2910 sc->sc_imask |= HAL_INT_SWBA; /* beacon prepare */ 2911 ath_beaconq_config(sc); 2912 } 2913 ath_hal_beaconinit(ah, nexttbtt, intval); 2914 sc->sc_bmisscount = 0; 2915 ath_hal_intrset(ah, sc->sc_imask); 2916 /* 2917 * When using a self-linked beacon descriptor in 2918 * ibss mode load it once here. 2919 */ 2920 if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol) 2921 ath_beacon_start_adhoc(sc, vap); 2922 } 2923 sc->sc_syncbeacon = 0; 2924#undef FUDGE 2925#undef TSF_TO_TU 2926} 2927 2928static void 2929ath_load_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 2930{ 2931 bus_addr_t *paddr = (bus_addr_t*) arg; 2932 KASSERT(error == 0, ("error %u on bus_dma callback", error)); 2933 *paddr = segs->ds_addr; 2934} 2935 2936static int 2937ath_descdma_setup(struct ath_softc *sc, 2938 struct ath_descdma *dd, ath_bufhead *head, 2939 const char *name, int nbuf, int ndesc) 2940{ 2941#define DS2PHYS(_dd, _ds) \ 2942 ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) 2943#define ATH_DESC_4KB_BOUND_CHECK(_daddr, _len) \ 2944 ((((u_int32_t)(_daddr) & 0xFFF) > (0x1000 - (_len))) ? 1 : 0) 2945 struct ifnet *ifp = sc->sc_ifp; 2946 uint8_t *ds; 2947 struct ath_buf *bf; 2948 int i, bsize, error; 2949 int desc_len; 2950 2951 desc_len = sizeof(struct ath_desc); 2952 2953 DPRINTF(sc, ATH_DEBUG_RESET, "%s: %s DMA: %u buffers %u desc/buf\n", 2954 __func__, name, nbuf, ndesc); 2955 2956 dd->dd_name = name; 2957 dd->dd_desc_len = desc_len * nbuf * ndesc; 2958 2959 /* 2960 * Merlin work-around: 2961 * Descriptors that cross the 4KB boundary can't be used. 2962 * Assume one skipped descriptor per 4KB page. 2963 */ 2964 if (! ath_hal_split4ktrans(sc->sc_ah)) { 2965 int numdescpage = 4096 / (desc_len * ndesc); 2966 dd->dd_desc_len = (nbuf / numdescpage + 1) * 4096; 2967 } 2968 2969 /* 2970 * Setup DMA descriptor area. 2971 */ 2972 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), /* parent */ 2973 PAGE_SIZE, 0, /* alignment, bounds */ 2974 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 2975 BUS_SPACE_MAXADDR, /* highaddr */ 2976 NULL, NULL, /* filter, filterarg */ 2977 dd->dd_desc_len, /* maxsize */ 2978 1, /* nsegments */ 2979 dd->dd_desc_len, /* maxsegsize */ 2980 BUS_DMA_ALLOCNOW, /* flags */ 2981 NULL, /* lockfunc */ 2982 NULL, /* lockarg */ 2983 &dd->dd_dmat); 2984 if (error != 0) { 2985 if_printf(ifp, "cannot allocate %s DMA tag\n", dd->dd_name); 2986 return error; 2987 } 2988 2989 /* allocate descriptors */ 2990 error = bus_dmamap_create(dd->dd_dmat, BUS_DMA_NOWAIT, &dd->dd_dmamap); 2991 if (error != 0) { 2992 if_printf(ifp, "unable to create dmamap for %s descriptors, " 2993 "error %u\n", dd->dd_name, error); 2994 goto fail0; 2995 } 2996 2997 error = bus_dmamem_alloc(dd->dd_dmat, (void**) &dd->dd_desc, 2998 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 2999 &dd->dd_dmamap); 3000 if (error != 0) { 3001 if_printf(ifp, "unable to alloc memory for %u %s descriptors, " 3002 "error %u\n", nbuf * ndesc, dd->dd_name, error); 3003 goto fail1; 3004 } 3005 3006 error = bus_dmamap_load(dd->dd_dmat, dd->dd_dmamap, 3007 dd->dd_desc, dd->dd_desc_len, 3008 ath_load_cb, &dd->dd_desc_paddr, 3009 BUS_DMA_NOWAIT); 3010 if (error != 0) { 3011 if_printf(ifp, "unable to map %s descriptors, error %u\n", 3012 dd->dd_name, error); 3013 goto fail2; 3014 } 3015 3016 ds = (uint8_t *) dd->dd_desc; 3017 DPRINTF(sc, ATH_DEBUG_RESET, "%s: %s DMA map: %p (%lu) -> %p (%lu)\n", 3018 __func__, dd->dd_name, ds, (u_long) dd->dd_desc_len, 3019 (caddr_t) dd->dd_desc_paddr, /*XXX*/ (u_long) dd->dd_desc_len); 3020 3021 /* allocate rx buffers */ 3022 bsize = sizeof(struct ath_buf) * nbuf; 3023 bf = malloc(bsize, M_ATHDEV, M_NOWAIT | M_ZERO); 3024 if (bf == NULL) { 3025 if_printf(ifp, "malloc of %s buffers failed, size %u\n", 3026 dd->dd_name, bsize); 3027 goto fail3; 3028 } 3029 dd->dd_bufptr = bf; 3030 3031 STAILQ_INIT(head); 3032 for (i = 0; i < nbuf; i++, bf++, ds += (ndesc * desc_len)) { 3033 bf->bf_desc = (struct ath_desc *) ds; 3034 bf->bf_daddr = DS2PHYS(dd, ds); 3035 if (! ath_hal_split4ktrans(sc->sc_ah)) { 3036 /* 3037 * Merlin WAR: Skip descriptor addresses which 3038 * cause 4KB boundary crossing along any point 3039 * in the descriptor. 3040 */ 3041 if (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr, 3042 desc_len * ndesc)) { 3043 /* Start at the next page */ 3044 ds += 0x1000 - (bf->bf_daddr & 0xFFF); 3045 bf->bf_desc = (struct ath_desc *) ds; 3046 bf->bf_daddr = DS2PHYS(dd, ds); 3047 } 3048 } 3049 error = bus_dmamap_create(sc->sc_dmat, BUS_DMA_NOWAIT, 3050 &bf->bf_dmamap); 3051 if (error != 0) { 3052 if_printf(ifp, "unable to create dmamap for %s " 3053 "buffer %u, error %u\n", dd->dd_name, i, error); 3054 ath_descdma_cleanup(sc, dd, head); 3055 return error; 3056 } 3057 STAILQ_INSERT_TAIL(head, bf, bf_list); 3058 } 3059 return 0; 3060fail3: 3061 bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap); 3062fail2: 3063 bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap); 3064fail1: 3065 bus_dmamap_destroy(dd->dd_dmat, dd->dd_dmamap); 3066fail0: 3067 bus_dma_tag_destroy(dd->dd_dmat); 3068 memset(dd, 0, sizeof(*dd)); 3069 return error; 3070#undef DS2PHYS 3071#undef ATH_DESC_4KB_BOUND_CHECK 3072} 3073 3074static void 3075ath_descdma_cleanup(struct ath_softc *sc, 3076 struct ath_descdma *dd, ath_bufhead *head) 3077{ 3078 struct ath_buf *bf; 3079 struct ieee80211_node *ni; 3080 3081 bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap); 3082 bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap); 3083 bus_dmamap_destroy(dd->dd_dmat, dd->dd_dmamap); 3084 bus_dma_tag_destroy(dd->dd_dmat); 3085 3086 STAILQ_FOREACH(bf, head, bf_list) { 3087 if (bf->bf_m) { 3088 m_freem(bf->bf_m); 3089 bf->bf_m = NULL; 3090 } 3091 if (bf->bf_dmamap != NULL) { 3092 bus_dmamap_destroy(sc->sc_dmat, bf->bf_dmamap); 3093 bf->bf_dmamap = NULL; 3094 } 3095 ni = bf->bf_node; 3096 bf->bf_node = NULL; 3097 if (ni != NULL) { 3098 /* 3099 * Reclaim node reference. 3100 */ 3101 ieee80211_free_node(ni); 3102 } 3103 } 3104 3105 STAILQ_INIT(head); 3106 free(dd->dd_bufptr, M_ATHDEV); 3107 memset(dd, 0, sizeof(*dd)); 3108} 3109 3110static int 3111ath_desc_alloc(struct ath_softc *sc) 3112{ 3113 int error; 3114 3115 error = ath_descdma_setup(sc, &sc->sc_rxdma, &sc->sc_rxbuf, 3116 "rx", ath_rxbuf, 1); 3117 if (error != 0) 3118 return error; 3119 3120 error = ath_descdma_setup(sc, &sc->sc_txdma, &sc->sc_txbuf, 3121 "tx", ath_txbuf, ATH_TXDESC); 3122 if (error != 0) { 3123 ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); 3124 return error; 3125 } 3126 3127 error = ath_descdma_setup(sc, &sc->sc_bdma, &sc->sc_bbuf, 3128 "beacon", ATH_BCBUF, 1); 3129 if (error != 0) { 3130 ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf); 3131 ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); 3132 return error; 3133 } 3134 return 0; 3135} 3136 3137static void 3138ath_desc_free(struct ath_softc *sc) 3139{ 3140 3141 if (sc->sc_bdma.dd_desc_len != 0) 3142 ath_descdma_cleanup(sc, &sc->sc_bdma, &sc->sc_bbuf); 3143 if (sc->sc_txdma.dd_desc_len != 0) 3144 ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf); 3145 if (sc->sc_rxdma.dd_desc_len != 0) 3146 ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); 3147} 3148 3149static struct ieee80211_node * 3150ath_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) 3151{ 3152 struct ieee80211com *ic = vap->iv_ic; 3153 struct ath_softc *sc = ic->ic_ifp->if_softc; 3154 const size_t space = sizeof(struct ath_node) + sc->sc_rc->arc_space; 3155 struct ath_node *an; 3156 3157 an = malloc(space, M_80211_NODE, M_NOWAIT|M_ZERO); 3158 if (an == NULL) { 3159 /* XXX stat+msg */ 3160 return NULL; 3161 } 3162 ath_rate_node_init(sc, an); 3163 3164 DPRINTF(sc, ATH_DEBUG_NODE, "%s: an %p\n", __func__, an); 3165 return &an->an_node; 3166} 3167 3168static void 3169ath_node_free(struct ieee80211_node *ni) 3170{ 3171 struct ieee80211com *ic = ni->ni_ic; 3172 struct ath_softc *sc = ic->ic_ifp->if_softc; 3173 3174 DPRINTF(sc, ATH_DEBUG_NODE, "%s: ni %p\n", __func__, ni); 3175 3176 ath_rate_node_cleanup(sc, ATH_NODE(ni)); 3177 sc->sc_node_free(ni); 3178} 3179 3180static void 3181ath_node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise) 3182{ 3183 struct ieee80211com *ic = ni->ni_ic; 3184 struct ath_softc *sc = ic->ic_ifp->if_softc; 3185 struct ath_hal *ah = sc->sc_ah; 3186 3187 *rssi = ic->ic_node_getrssi(ni); 3188 if (ni->ni_chan != IEEE80211_CHAN_ANYC) 3189 *noise = ath_hal_getchannoise(ah, ni->ni_chan); 3190 else 3191 *noise = -95; /* nominally correct */ 3192} 3193 3194static int 3195ath_rxbuf_init(struct ath_softc *sc, struct ath_buf *bf) 3196{ 3197 struct ath_hal *ah = sc->sc_ah; 3198 int error; 3199 struct mbuf *m; 3200 struct ath_desc *ds; 3201 3202 m = bf->bf_m; 3203 if (m == NULL) { 3204 /* 3205 * NB: by assigning a page to the rx dma buffer we 3206 * implicitly satisfy the Atheros requirement that 3207 * this buffer be cache-line-aligned and sized to be 3208 * multiple of the cache line size. Not doing this 3209 * causes weird stuff to happen (for the 5210 at least). 3210 */ 3211 m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); 3212 if (m == NULL) { 3213 DPRINTF(sc, ATH_DEBUG_ANY, 3214 "%s: no mbuf/cluster\n", __func__); 3215 sc->sc_stats.ast_rx_nombuf++; 3216 return ENOMEM; 3217 } 3218 m->m_pkthdr.len = m->m_len = m->m_ext.ext_size; 3219 3220 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, 3221 bf->bf_dmamap, m, 3222 bf->bf_segs, &bf->bf_nseg, 3223 BUS_DMA_NOWAIT); 3224 if (error != 0) { 3225 DPRINTF(sc, ATH_DEBUG_ANY, 3226 "%s: bus_dmamap_load_mbuf_sg failed; error %d\n", 3227 __func__, error); 3228 sc->sc_stats.ast_rx_busdma++; 3229 m_freem(m); 3230 return error; 3231 } 3232 KASSERT(bf->bf_nseg == 1, 3233 ("multi-segment packet; nseg %u", bf->bf_nseg)); 3234 bf->bf_m = m; 3235 } 3236 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREREAD); 3237 3238 /* 3239 * Setup descriptors. For receive we always terminate 3240 * the descriptor list with a self-linked entry so we'll 3241 * not get overrun under high load (as can happen with a 3242 * 5212 when ANI processing enables PHY error frames). 3243 * 3244 * To insure the last descriptor is self-linked we create 3245 * each descriptor as self-linked and add it to the end. As 3246 * each additional descriptor is added the previous self-linked 3247 * entry is ``fixed'' naturally. This should be safe even 3248 * if DMA is happening. When processing RX interrupts we 3249 * never remove/process the last, self-linked, entry on the 3250 * descriptor list. This insures the hardware always has 3251 * someplace to write a new frame. 3252 */ 3253 /* 3254 * 11N: we can no longer afford to self link the last descriptor. 3255 * MAC acknowledges BA status as long as it copies frames to host 3256 * buffer (or rx fifo). This can incorrectly acknowledge packets 3257 * to a sender if last desc is self-linked. 3258 */ 3259 ds = bf->bf_desc; 3260 if (sc->sc_rxslink) 3261 ds->ds_link = bf->bf_daddr; /* link to self */ 3262 else 3263 ds->ds_link = 0; /* terminate the list */ 3264 ds->ds_data = bf->bf_segs[0].ds_addr; 3265 ath_hal_setuprxdesc(ah, ds 3266 , m->m_len /* buffer size */ 3267 , 0 3268 ); 3269 3270 if (sc->sc_rxlink != NULL) 3271 *sc->sc_rxlink = bf->bf_daddr; 3272 sc->sc_rxlink = &ds->ds_link; 3273 return 0; 3274} 3275 3276/* 3277 * Extend 15-bit time stamp from rx descriptor to 3278 * a full 64-bit TSF using the specified TSF. 3279 */ 3280static __inline u_int64_t 3281ath_extend_tsf15(u_int32_t rstamp, u_int64_t tsf) 3282{ 3283 if ((tsf & 0x7fff) < rstamp) 3284 tsf -= 0x8000; 3285 3286 return ((tsf &~ 0x7fff) | rstamp); 3287} 3288 3289/* 3290 * Extend 32-bit time stamp from rx descriptor to 3291 * a full 64-bit TSF using the specified TSF. 3292 */ 3293static __inline u_int64_t 3294ath_extend_tsf32(u_int32_t rstamp, u_int64_t tsf) 3295{ 3296 u_int32_t tsf_low = tsf & 0xffffffff; 3297 u_int64_t tsf64 = (tsf & ~0xffffffffULL) | rstamp; 3298 3299 if (rstamp > tsf_low && (rstamp - tsf_low > 0x10000000)) 3300 tsf64 -= 0x100000000ULL; 3301 3302 if (rstamp < tsf_low && (tsf_low - rstamp > 0x10000000)) 3303 tsf64 += 0x100000000ULL; 3304 3305 return tsf64; 3306} 3307 3308/* 3309 * Extend the TSF from the RX descriptor to a full 64 bit TSF. 3310 * Earlier hardware versions only wrote the low 15 bits of the 3311 * TSF into the RX descriptor; later versions (AR5416 and up) 3312 * include the 32 bit TSF value. 3313 */ 3314static __inline u_int64_t 3315ath_extend_tsf(struct ath_softc *sc, u_int32_t rstamp, u_int64_t tsf) 3316{ 3317 if (sc->sc_rxtsf32) 3318 return ath_extend_tsf32(rstamp, tsf); 3319 else 3320 return ath_extend_tsf15(rstamp, tsf); 3321} 3322 3323/* 3324 * Intercept management frames to collect beacon rssi data 3325 * and to do ibss merges. 3326 */ 3327static void 3328ath_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m, 3329 int subtype, int rssi, int nf) 3330{ 3331 struct ieee80211vap *vap = ni->ni_vap; 3332 struct ath_softc *sc = vap->iv_ic->ic_ifp->if_softc; 3333 3334 /* 3335 * Call up first so subsequent work can use information 3336 * potentially stored in the node (e.g. for ibss merge). 3337 */ 3338 ATH_VAP(vap)->av_recv_mgmt(ni, m, subtype, rssi, nf); 3339 switch (subtype) { 3340 case IEEE80211_FC0_SUBTYPE_BEACON: 3341 /* update rssi statistics for use by the hal */ 3342 ATH_RSSI_LPF(sc->sc_halstats.ns_avgbrssi, rssi); 3343 if (sc->sc_syncbeacon && 3344 ni == vap->iv_bss && vap->iv_state == IEEE80211_S_RUN) { 3345 /* 3346 * Resync beacon timers using the tsf of the beacon 3347 * frame we just received. 3348 */ 3349 ath_beacon_config(sc, vap); 3350 } 3351 /* fall thru... */ 3352 case IEEE80211_FC0_SUBTYPE_PROBE_RESP: 3353 if (vap->iv_opmode == IEEE80211_M_IBSS && 3354 vap->iv_state == IEEE80211_S_RUN) { 3355 uint32_t rstamp = sc->sc_lastrs->rs_tstamp; 3356 uint64_t tsf = ath_extend_tsf(sc, rstamp, 3357 ath_hal_gettsf64(sc->sc_ah)); 3358 /* 3359 * Handle ibss merge as needed; check the tsf on the 3360 * frame before attempting the merge. The 802.11 spec 3361 * says the station should change it's bssid to match 3362 * the oldest station with the same ssid, where oldest 3363 * is determined by the tsf. Note that hardware 3364 * reconfiguration happens through callback to 3365 * ath_newstate as the state machine will go from 3366 * RUN -> RUN when this happens. 3367 */ 3368 if (le64toh(ni->ni_tstamp.tsf) >= tsf) { 3369 DPRINTF(sc, ATH_DEBUG_STATE, 3370 "ibss merge, rstamp %u tsf %ju " 3371 "tstamp %ju\n", rstamp, (uintmax_t)tsf, 3372 (uintmax_t)ni->ni_tstamp.tsf); 3373 (void) ieee80211_ibss_merge(ni); 3374 } 3375 } 3376 break; 3377 } 3378} 3379 3380/* 3381 * Set the default antenna. 3382 */ 3383static void 3384ath_setdefantenna(struct ath_softc *sc, u_int antenna) 3385{ 3386 struct ath_hal *ah = sc->sc_ah; 3387 3388 /* XXX block beacon interrupts */ 3389 ath_hal_setdefantenna(ah, antenna); 3390 if (sc->sc_defant != antenna) 3391 sc->sc_stats.ast_ant_defswitch++; 3392 sc->sc_defant = antenna; 3393 sc->sc_rxotherant = 0; 3394} 3395 3396static void 3397ath_rx_tap(struct ifnet *ifp, struct mbuf *m, 3398 const struct ath_rx_status *rs, u_int64_t tsf, int16_t nf) 3399{ 3400#define CHAN_HT20 htole32(IEEE80211_CHAN_HT20) 3401#define CHAN_HT40U htole32(IEEE80211_CHAN_HT40U) 3402#define CHAN_HT40D htole32(IEEE80211_CHAN_HT40D) 3403#define CHAN_HT (CHAN_HT20|CHAN_HT40U|CHAN_HT40D) 3404 struct ath_softc *sc = ifp->if_softc; 3405 const HAL_RATE_TABLE *rt; 3406 uint8_t rix; 3407 3408 rt = sc->sc_currates; 3409 KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); 3410 rix = rt->rateCodeToIndex[rs->rs_rate]; 3411 sc->sc_rx_th.wr_rate = sc->sc_hwmap[rix].ieeerate; 3412 sc->sc_rx_th.wr_flags = sc->sc_hwmap[rix].rxflags; 3413#ifdef AH_SUPPORT_AR5416 3414 sc->sc_rx_th.wr_chan_flags &= ~CHAN_HT; 3415 if (sc->sc_rx_th.wr_rate & IEEE80211_RATE_MCS) { /* HT rate */ 3416 struct ieee80211com *ic = ifp->if_l2com; 3417 3418 if ((rs->rs_flags & HAL_RX_2040) == 0) 3419 sc->sc_rx_th.wr_chan_flags |= CHAN_HT20; 3420 else if (IEEE80211_IS_CHAN_HT40U(ic->ic_curchan)) 3421 sc->sc_rx_th.wr_chan_flags |= CHAN_HT40U; 3422 else 3423 sc->sc_rx_th.wr_chan_flags |= CHAN_HT40D; 3424 if ((rs->rs_flags & HAL_RX_GI) == 0) 3425 sc->sc_rx_th.wr_flags |= IEEE80211_RADIOTAP_F_SHORTGI; 3426 } 3427#endif 3428 sc->sc_rx_th.wr_tsf = htole64(ath_extend_tsf(sc, rs->rs_tstamp, tsf)); 3429 if (rs->rs_status & HAL_RXERR_CRC) 3430 sc->sc_rx_th.wr_flags |= IEEE80211_RADIOTAP_F_BADFCS; 3431 /* XXX propagate other error flags from descriptor */ 3432 sc->sc_rx_th.wr_antnoise = nf; 3433 sc->sc_rx_th.wr_antsignal = nf + rs->rs_rssi; 3434 sc->sc_rx_th.wr_antenna = rs->rs_antenna; 3435#undef CHAN_HT 3436#undef CHAN_HT20 3437#undef CHAN_HT40U 3438#undef CHAN_HT40D 3439} 3440 3441static void 3442ath_handle_micerror(struct ieee80211com *ic, 3443 struct ieee80211_frame *wh, int keyix) 3444{ 3445 struct ieee80211_node *ni; 3446 3447 /* XXX recheck MIC to deal w/ chips that lie */ 3448 /* XXX discard MIC errors on !data frames */ 3449 ni = ieee80211_find_rxnode(ic, (const struct ieee80211_frame_min *) wh); 3450 if (ni != NULL) { 3451 ieee80211_notify_michael_failure(ni->ni_vap, wh, keyix); 3452 ieee80211_free_node(ni); 3453 } 3454} 3455 3456static void 3457ath_rx_proc(void *arg, int npending) 3458{ 3459#define PA2DESC(_sc, _pa) \ 3460 ((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \ 3461 ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr))) 3462 struct ath_softc *sc = arg; 3463 struct ath_buf *bf; 3464 struct ifnet *ifp = sc->sc_ifp; 3465 struct ieee80211com *ic = ifp->if_l2com; 3466 struct ath_hal *ah = sc->sc_ah; 3467 struct ath_desc *ds; 3468 struct ath_rx_status *rs; 3469 struct mbuf *m; 3470 struct ieee80211_node *ni; 3471 int len, type, ngood; 3472 HAL_STATUS status; 3473 int16_t nf; 3474 u_int64_t tsf; 3475 3476 DPRINTF(sc, ATH_DEBUG_RX_PROC, "%s: pending %u\n", __func__, npending); 3477 ngood = 0; 3478 nf = ath_hal_getchannoise(ah, sc->sc_curchan); 3479 sc->sc_stats.ast_rx_noise = nf; 3480 tsf = ath_hal_gettsf64(ah); 3481 do { 3482 bf = STAILQ_FIRST(&sc->sc_rxbuf); 3483 if (sc->sc_rxslink && bf == NULL) { /* NB: shouldn't happen */ 3484 if_printf(ifp, "%s: no buffer!\n", __func__); 3485 break; 3486 } else if (bf == NULL) { 3487 /* 3488 * End of List: 3489 * this can happen for non-self-linked RX chains 3490 */ 3491 sc->sc_stats.ast_rx_hitqueueend++; 3492 break; 3493 } 3494 m = bf->bf_m; 3495 if (m == NULL) { /* NB: shouldn't happen */ 3496 /* 3497 * If mbuf allocation failed previously there 3498 * will be no mbuf; try again to re-populate it. 3499 */ 3500 /* XXX make debug msg */ 3501 if_printf(ifp, "%s: no mbuf!\n", __func__); 3502 STAILQ_REMOVE_HEAD(&sc->sc_rxbuf, bf_list); 3503 goto rx_next; 3504 } 3505 ds = bf->bf_desc; 3506 if (ds->ds_link == bf->bf_daddr) { 3507 /* NB: never process the self-linked entry at the end */ 3508 sc->sc_stats.ast_rx_hitqueueend++; 3509 break; 3510 } 3511 /* XXX sync descriptor memory */ 3512 /* 3513 * Must provide the virtual address of the current 3514 * descriptor, the physical address, and the virtual 3515 * address of the next descriptor in the h/w chain. 3516 * This allows the HAL to look ahead to see if the 3517 * hardware is done with a descriptor by checking the 3518 * done bit in the following descriptor and the address 3519 * of the current descriptor the DMA engine is working 3520 * on. All this is necessary because of our use of 3521 * a self-linked list to avoid rx overruns. 3522 */ 3523 rs = &bf->bf_status.ds_rxstat; 3524 status = ath_hal_rxprocdesc(ah, ds, 3525 bf->bf_daddr, PA2DESC(sc, ds->ds_link), rs); 3526#ifdef ATH_DEBUG 3527 if (sc->sc_debug & ATH_DEBUG_RECV_DESC) 3528 ath_printrxbuf(sc, bf, 0, status == HAL_OK); 3529#endif 3530 if (status == HAL_EINPROGRESS) 3531 break; 3532 STAILQ_REMOVE_HEAD(&sc->sc_rxbuf, bf_list); 3533 3534 /* These aren't specifically errors */ 3535 if (rs->rs_flags & HAL_RX_GI) 3536 sc->sc_stats.ast_rx_halfgi++; 3537 if (rs->rs_flags & HAL_RX_2040) 3538 sc->sc_stats.ast_rx_2040++; 3539 if (rs->rs_flags & HAL_RX_DELIM_CRC_PRE) 3540 sc->sc_stats.ast_rx_pre_crc_err++; 3541 if (rs->rs_flags & HAL_RX_DELIM_CRC_POST) 3542 sc->sc_stats.ast_rx_post_crc_err++; 3543 if (rs->rs_flags & HAL_RX_DECRYPT_BUSY) 3544 sc->sc_stats.ast_rx_decrypt_busy_err++; 3545 if (rs->rs_flags & HAL_RX_HI_RX_CHAIN) 3546 sc->sc_stats.ast_rx_hi_rx_chain++; 3547 3548 if (rs->rs_status != 0) { 3549 if (rs->rs_status & HAL_RXERR_CRC) 3550 sc->sc_stats.ast_rx_crcerr++; 3551 if (rs->rs_status & HAL_RXERR_FIFO) 3552 sc->sc_stats.ast_rx_fifoerr++; 3553 if (rs->rs_status & HAL_RXERR_PHY) { 3554 sc->sc_stats.ast_rx_phyerr++; 3555 /* Process DFS radar events */ 3556 if ((rs->rs_phyerr == HAL_PHYERR_RADAR) || 3557 (rs->rs_phyerr == HAL_PHYERR_FALSE_RADAR_EXT)) { 3558 /* Since we're touching the frame data, sync it */ 3559 bus_dmamap_sync(sc->sc_dmat, 3560 bf->bf_dmamap, 3561 BUS_DMASYNC_POSTREAD); 3562 /* Now pass it to the radar processing code */ 3563 ath_dfs_process_phy_err(sc, mtod(m, char *), tsf, rs); 3564 } 3565 3566 /* Be suitably paranoid about receiving phy errors out of the stats array bounds */ 3567 if (rs->rs_phyerr < 64) 3568 sc->sc_stats.ast_rx_phy[rs->rs_phyerr]++; 3569 goto rx_error; /* NB: don't count in ierrors */ 3570 } 3571 if (rs->rs_status & HAL_RXERR_DECRYPT) { 3572 /* 3573 * Decrypt error. If the error occurred 3574 * because there was no hardware key, then 3575 * let the frame through so the upper layers 3576 * can process it. This is necessary for 5210 3577 * parts which have no way to setup a ``clear'' 3578 * key cache entry. 3579 * 3580 * XXX do key cache faulting 3581 */ 3582 if (rs->rs_keyix == HAL_RXKEYIX_INVALID) 3583 goto rx_accept; 3584 sc->sc_stats.ast_rx_badcrypt++; 3585 } 3586 if (rs->rs_status & HAL_RXERR_MIC) { 3587 sc->sc_stats.ast_rx_badmic++; 3588 /* 3589 * Do minimal work required to hand off 3590 * the 802.11 header for notification. 3591 */ 3592 /* XXX frag's and qos frames */ 3593 len = rs->rs_datalen; 3594 if (len >= sizeof (struct ieee80211_frame)) { 3595 bus_dmamap_sync(sc->sc_dmat, 3596 bf->bf_dmamap, 3597 BUS_DMASYNC_POSTREAD); 3598 ath_handle_micerror(ic, 3599 mtod(m, struct ieee80211_frame *), 3600 sc->sc_splitmic ? 3601 rs->rs_keyix-32 : rs->rs_keyix); 3602 } 3603 } 3604 ifp->if_ierrors++; 3605rx_error: 3606 /* 3607 * Cleanup any pending partial frame. 3608 */ 3609 if (sc->sc_rxpending != NULL) { 3610 m_freem(sc->sc_rxpending); 3611 sc->sc_rxpending = NULL; 3612 } 3613 /* 3614 * When a tap is present pass error frames 3615 * that have been requested. By default we 3616 * pass decrypt+mic errors but others may be 3617 * interesting (e.g. crc). 3618 */ 3619 if (ieee80211_radiotap_active(ic) && 3620 (rs->rs_status & sc->sc_monpass)) { 3621 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, 3622 BUS_DMASYNC_POSTREAD); 3623 /* NB: bpf needs the mbuf length setup */ 3624 len = rs->rs_datalen; 3625 m->m_pkthdr.len = m->m_len = len; 3626 ath_rx_tap(ifp, m, rs, tsf, nf); 3627 ieee80211_radiotap_rx_all(ic, m); 3628 } 3629 /* XXX pass MIC errors up for s/w reclaculation */ 3630 goto rx_next; 3631 } 3632rx_accept: 3633 /* 3634 * Sync and unmap the frame. At this point we're 3635 * committed to passing the mbuf somewhere so clear 3636 * bf_m; this means a new mbuf must be allocated 3637 * when the rx descriptor is setup again to receive 3638 * another frame. 3639 */ 3640 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, 3641 BUS_DMASYNC_POSTREAD); 3642 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 3643 bf->bf_m = NULL; 3644 3645 len = rs->rs_datalen; 3646 m->m_len = len; 3647 3648 if (rs->rs_more) { 3649 /* 3650 * Frame spans multiple descriptors; save 3651 * it for the next completed descriptor, it 3652 * will be used to construct a jumbogram. 3653 */ 3654 if (sc->sc_rxpending != NULL) { 3655 /* NB: max frame size is currently 2 clusters */ 3656 sc->sc_stats.ast_rx_toobig++; 3657 m_freem(sc->sc_rxpending); 3658 } 3659 m->m_pkthdr.rcvif = ifp; 3660 m->m_pkthdr.len = len; 3661 sc->sc_rxpending = m; 3662 goto rx_next; 3663 } else if (sc->sc_rxpending != NULL) { 3664 /* 3665 * This is the second part of a jumbogram, 3666 * chain it to the first mbuf, adjust the 3667 * frame length, and clear the rxpending state. 3668 */ 3669 sc->sc_rxpending->m_next = m; 3670 sc->sc_rxpending->m_pkthdr.len += len; 3671 m = sc->sc_rxpending; 3672 sc->sc_rxpending = NULL; 3673 } else { 3674 /* 3675 * Normal single-descriptor receive; setup 3676 * the rcvif and packet length. 3677 */ 3678 m->m_pkthdr.rcvif = ifp; 3679 m->m_pkthdr.len = len; 3680 } 3681 3682 ifp->if_ipackets++; 3683 sc->sc_stats.ast_ant_rx[rs->rs_antenna]++; 3684 3685 /* 3686 * Populate the rx status block. When there are bpf 3687 * listeners we do the additional work to provide 3688 * complete status. Otherwise we fill in only the 3689 * material required by ieee80211_input. Note that 3690 * noise setting is filled in above. 3691 */ 3692 if (ieee80211_radiotap_active(ic)) 3693 ath_rx_tap(ifp, m, rs, tsf, nf); 3694 3695 /* 3696 * From this point on we assume the frame is at least 3697 * as large as ieee80211_frame_min; verify that. 3698 */ 3699 if (len < IEEE80211_MIN_LEN) { 3700 if (!ieee80211_radiotap_active(ic)) { 3701 DPRINTF(sc, ATH_DEBUG_RECV, 3702 "%s: short packet %d\n", __func__, len); 3703 sc->sc_stats.ast_rx_tooshort++; 3704 } else { 3705 /* NB: in particular this captures ack's */ 3706 ieee80211_radiotap_rx_all(ic, m); 3707 } 3708 m_freem(m); 3709 goto rx_next; 3710 } 3711 3712 if (IFF_DUMPPKTS(sc, ATH_DEBUG_RECV)) { 3713 const HAL_RATE_TABLE *rt = sc->sc_currates; 3714 uint8_t rix = rt->rateCodeToIndex[rs->rs_rate]; 3715 3716 ieee80211_dump_pkt(ic, mtod(m, caddr_t), len, 3717 sc->sc_hwmap[rix].ieeerate, rs->rs_rssi); 3718 } 3719 3720 m_adj(m, -IEEE80211_CRC_LEN); 3721 3722 /* 3723 * Locate the node for sender, track state, and then 3724 * pass the (referenced) node up to the 802.11 layer 3725 * for its use. 3726 */ 3727 ni = ieee80211_find_rxnode_withkey(ic, 3728 mtod(m, const struct ieee80211_frame_min *), 3729 rs->rs_keyix == HAL_RXKEYIX_INVALID ? 3730 IEEE80211_KEYIX_NONE : rs->rs_keyix); 3731 sc->sc_lastrs = rs; 3732 3733 if (rs->rs_isaggr) 3734 sc->sc_stats.ast_rx_agg++; 3735 3736 if (ni != NULL) { 3737 /* 3738 * Only punt packets for ampdu reorder processing for 3739 * 11n nodes; net80211 enforces that M_AMPDU is only 3740 * set for 11n nodes. 3741 */ 3742 if (ni->ni_flags & IEEE80211_NODE_HT) 3743 m->m_flags |= M_AMPDU; 3744 3745 /* 3746 * Sending station is known, dispatch directly. 3747 */ 3748 type = ieee80211_input(ni, m, rs->rs_rssi, nf); 3749 ieee80211_free_node(ni); 3750 /* 3751 * Arrange to update the last rx timestamp only for 3752 * frames from our ap when operating in station mode. 3753 * This assumes the rx key is always setup when 3754 * associated. 3755 */ 3756 if (ic->ic_opmode == IEEE80211_M_STA && 3757 rs->rs_keyix != HAL_RXKEYIX_INVALID) 3758 ngood++; 3759 } else { 3760 type = ieee80211_input_all(ic, m, rs->rs_rssi, nf); 3761 } 3762 /* 3763 * Track rx rssi and do any rx antenna management. 3764 */ 3765 ATH_RSSI_LPF(sc->sc_halstats.ns_avgrssi, rs->rs_rssi); 3766 if (sc->sc_diversity) { 3767 /* 3768 * When using fast diversity, change the default rx 3769 * antenna if diversity chooses the other antenna 3 3770 * times in a row. 3771 */ 3772 if (sc->sc_defant != rs->rs_antenna) { 3773 if (++sc->sc_rxotherant >= 3) 3774 ath_setdefantenna(sc, rs->rs_antenna); 3775 } else 3776 sc->sc_rxotherant = 0; 3777 } 3778 3779 /* Newer school diversity - kite specific for now */ 3780 /* XXX perhaps migrate the normal diversity code to this? */ 3781 if ((ah)->ah_rxAntCombDiversity) 3782 (*(ah)->ah_rxAntCombDiversity)(ah, rs, ticks, hz); 3783 3784 if (sc->sc_softled) { 3785 /* 3786 * Blink for any data frame. Otherwise do a 3787 * heartbeat-style blink when idle. The latter 3788 * is mainly for station mode where we depend on 3789 * periodic beacon frames to trigger the poll event. 3790 */ 3791 if (type == IEEE80211_FC0_TYPE_DATA) { 3792 const HAL_RATE_TABLE *rt = sc->sc_currates; 3793 ath_led_event(sc, 3794 rt->rateCodeToIndex[rs->rs_rate]); 3795 } else if (ticks - sc->sc_ledevent >= sc->sc_ledidle) 3796 ath_led_event(sc, 0); 3797 } 3798rx_next: 3799 STAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list); 3800 } while (ath_rxbuf_init(sc, bf) == 0); 3801 3802 /* rx signal state monitoring */ 3803 ath_hal_rxmonitor(ah, &sc->sc_halstats, sc->sc_curchan); 3804 if (ngood) 3805 sc->sc_lastrx = tsf; 3806 3807 /* Queue DFS tasklet if needed */ 3808 if (ath_dfs_tasklet_needed(sc, sc->sc_curchan)) 3809 taskqueue_enqueue(sc->sc_tq, &sc->sc_dfstask); 3810 3811 /* 3812 * Now that all the RX frames were handled that 3813 * need to be handled, kick the PCU if there's 3814 * been an RXEOL condition. 3815 */ 3816 if (sc->sc_kickpcu) { 3817 sc->sc_kickpcu = 0; 3818 ath_stoprecv(sc); 3819 sc->sc_imask |= (HAL_INT_RXEOL | HAL_INT_RXORN); 3820 if (ath_startrecv(sc) != 0) { 3821 if_printf(ifp, 3822 "%s: couldn't restart RX after RXEOL; resetting\n", 3823 __func__); 3824 ath_reset(ifp); 3825 return; 3826 } 3827 ath_hal_intrset(ah, sc->sc_imask); 3828 } 3829 3830 if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) == 0) { 3831#ifdef IEEE80211_SUPPORT_SUPERG 3832 ieee80211_ff_age_all(ic, 100); 3833#endif 3834 if (!IFQ_IS_EMPTY(&ifp->if_snd)) 3835 ath_start(ifp); 3836 } 3837#undef PA2DESC 3838} 3839 3840static void 3841ath_txq_init(struct ath_softc *sc, struct ath_txq *txq, int qnum) 3842{ 3843 txq->axq_qnum = qnum; 3844 txq->axq_ac = 0; 3845 txq->axq_depth = 0; 3846 txq->axq_intrcnt = 0; 3847 txq->axq_link = NULL; 3848 STAILQ_INIT(&txq->axq_q); 3849 ATH_TXQ_LOCK_INIT(sc, txq); 3850} 3851 3852/* 3853 * Setup a h/w transmit queue. 3854 */ 3855static struct ath_txq * 3856ath_txq_setup(struct ath_softc *sc, int qtype, int subtype) 3857{ 3858#define N(a) (sizeof(a)/sizeof(a[0])) 3859 struct ath_hal *ah = sc->sc_ah; 3860 HAL_TXQ_INFO qi; 3861 int qnum; 3862 3863 memset(&qi, 0, sizeof(qi)); 3864 qi.tqi_subtype = subtype; 3865 qi.tqi_aifs = HAL_TXQ_USEDEFAULT; 3866 qi.tqi_cwmin = HAL_TXQ_USEDEFAULT; 3867 qi.tqi_cwmax = HAL_TXQ_USEDEFAULT; 3868 /* 3869 * Enable interrupts only for EOL and DESC conditions. 3870 * We mark tx descriptors to receive a DESC interrupt 3871 * when a tx queue gets deep; otherwise waiting for the 3872 * EOL to reap descriptors. Note that this is done to 3873 * reduce interrupt load and this only defers reaping 3874 * descriptors, never transmitting frames. Aside from 3875 * reducing interrupts this also permits more concurrency. 3876 * The only potential downside is if the tx queue backs 3877 * up in which case the top half of the kernel may backup 3878 * due to a lack of tx descriptors. 3879 */ 3880 qi.tqi_qflags = HAL_TXQ_TXEOLINT_ENABLE | HAL_TXQ_TXDESCINT_ENABLE; 3881 qnum = ath_hal_setuptxqueue(ah, qtype, &qi); 3882 if (qnum == -1) { 3883 /* 3884 * NB: don't print a message, this happens 3885 * normally on parts with too few tx queues 3886 */ 3887 return NULL; 3888 } 3889 if (qnum >= N(sc->sc_txq)) { 3890 device_printf(sc->sc_dev, 3891 "hal qnum %u out of range, max %zu!\n", 3892 qnum, N(sc->sc_txq)); 3893 ath_hal_releasetxqueue(ah, qnum); 3894 return NULL; 3895 } 3896 if (!ATH_TXQ_SETUP(sc, qnum)) { 3897 ath_txq_init(sc, &sc->sc_txq[qnum], qnum); 3898 sc->sc_txqsetup |= 1<<qnum; 3899 } 3900 return &sc->sc_txq[qnum]; 3901#undef N 3902} 3903 3904/* 3905 * Setup a hardware data transmit queue for the specified 3906 * access control. The hal may not support all requested 3907 * queues in which case it will return a reference to a 3908 * previously setup queue. We record the mapping from ac's 3909 * to h/w queues for use by ath_tx_start and also track 3910 * the set of h/w queues being used to optimize work in the 3911 * transmit interrupt handler and related routines. 3912 */ 3913static int 3914ath_tx_setup(struct ath_softc *sc, int ac, int haltype) 3915{ 3916#define N(a) (sizeof(a)/sizeof(a[0])) 3917 struct ath_txq *txq; 3918 3919 if (ac >= N(sc->sc_ac2q)) { 3920 device_printf(sc->sc_dev, "AC %u out of range, max %zu!\n", 3921 ac, N(sc->sc_ac2q)); 3922 return 0; 3923 } 3924 txq = ath_txq_setup(sc, HAL_TX_QUEUE_DATA, haltype); 3925 if (txq != NULL) { 3926 txq->axq_ac = ac; 3927 sc->sc_ac2q[ac] = txq; 3928 return 1; 3929 } else 3930 return 0; 3931#undef N 3932} 3933 3934/* 3935 * Update WME parameters for a transmit queue. 3936 */ 3937static int 3938ath_txq_update(struct ath_softc *sc, int ac) 3939{ 3940#define ATH_EXPONENT_TO_VALUE(v) ((1<<v)-1) 3941#define ATH_TXOP_TO_US(v) (v<<5) 3942 struct ifnet *ifp = sc->sc_ifp; 3943 struct ieee80211com *ic = ifp->if_l2com; 3944 struct ath_txq *txq = sc->sc_ac2q[ac]; 3945 struct wmeParams *wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac]; 3946 struct ath_hal *ah = sc->sc_ah; 3947 HAL_TXQ_INFO qi; 3948 3949 ath_hal_gettxqueueprops(ah, txq->axq_qnum, &qi); 3950#ifdef IEEE80211_SUPPORT_TDMA 3951 if (sc->sc_tdma) { 3952 /* 3953 * AIFS is zero so there's no pre-transmit wait. The 3954 * burst time defines the slot duration and is configured 3955 * through net80211. The QCU is setup to not do post-xmit 3956 * back off, lockout all lower-priority QCU's, and fire 3957 * off the DMA beacon alert timer which is setup based 3958 * on the slot configuration. 3959 */ 3960 qi.tqi_qflags = HAL_TXQ_TXOKINT_ENABLE 3961 | HAL_TXQ_TXERRINT_ENABLE 3962 | HAL_TXQ_TXURNINT_ENABLE 3963 | HAL_TXQ_TXEOLINT_ENABLE 3964 | HAL_TXQ_DBA_GATED 3965 | HAL_TXQ_BACKOFF_DISABLE 3966 | HAL_TXQ_ARB_LOCKOUT_GLOBAL 3967 ; 3968 qi.tqi_aifs = 0; 3969 /* XXX +dbaprep? */ 3970 qi.tqi_readyTime = sc->sc_tdmaslotlen; 3971 qi.tqi_burstTime = qi.tqi_readyTime; 3972 } else { 3973#endif 3974 qi.tqi_qflags = HAL_TXQ_TXOKINT_ENABLE 3975 | HAL_TXQ_TXERRINT_ENABLE 3976 | HAL_TXQ_TXDESCINT_ENABLE 3977 | HAL_TXQ_TXURNINT_ENABLE 3978 ; 3979 qi.tqi_aifs = wmep->wmep_aifsn; 3980 qi.tqi_cwmin = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin); 3981 qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax); 3982 qi.tqi_readyTime = 0; 3983 qi.tqi_burstTime = ATH_TXOP_TO_US(wmep->wmep_txopLimit); 3984#ifdef IEEE80211_SUPPORT_TDMA 3985 } 3986#endif 3987 3988 DPRINTF(sc, ATH_DEBUG_RESET, 3989 "%s: Q%u qflags 0x%x aifs %u cwmin %u cwmax %u burstTime %u\n", 3990 __func__, txq->axq_qnum, qi.tqi_qflags, 3991 qi.tqi_aifs, qi.tqi_cwmin, qi.tqi_cwmax, qi.tqi_burstTime); 3992 3993 if (!ath_hal_settxqueueprops(ah, txq->axq_qnum, &qi)) { 3994 if_printf(ifp, "unable to update hardware queue " 3995 "parameters for %s traffic!\n", 3996 ieee80211_wme_acnames[ac]); 3997 return 0; 3998 } else { 3999 ath_hal_resettxqueue(ah, txq->axq_qnum); /* push to h/w */ 4000 return 1; 4001 } 4002#undef ATH_TXOP_TO_US 4003#undef ATH_EXPONENT_TO_VALUE 4004} 4005 4006/* 4007 * Callback from the 802.11 layer to update WME parameters. 4008 */ 4009static int 4010ath_wme_update(struct ieee80211com *ic) 4011{ 4012 struct ath_softc *sc = ic->ic_ifp->if_softc; 4013 4014 return !ath_txq_update(sc, WME_AC_BE) || 4015 !ath_txq_update(sc, WME_AC_BK) || 4016 !ath_txq_update(sc, WME_AC_VI) || 4017 !ath_txq_update(sc, WME_AC_VO) ? EIO : 0; 4018} 4019 4020/* 4021 * Reclaim resources for a setup queue. 4022 */ 4023static void 4024ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq) 4025{ 4026 4027 ath_hal_releasetxqueue(sc->sc_ah, txq->axq_qnum); 4028 ATH_TXQ_LOCK_DESTROY(txq); 4029 sc->sc_txqsetup &= ~(1<<txq->axq_qnum); 4030} 4031 4032/* 4033 * Reclaim all tx queue resources. 4034 */ 4035static void 4036ath_tx_cleanup(struct ath_softc *sc) 4037{ 4038 int i; 4039 4040 ATH_TXBUF_LOCK_DESTROY(sc); 4041 for (i = 0; i < HAL_NUM_TX_QUEUES; i++) 4042 if (ATH_TXQ_SETUP(sc, i)) 4043 ath_tx_cleanupq(sc, &sc->sc_txq[i]); 4044} 4045 4046/* 4047 * Return h/w rate index for an IEEE rate (w/o basic rate bit) 4048 * using the current rates in sc_rixmap. 4049 */ 4050int 4051ath_tx_findrix(const struct ath_softc *sc, uint8_t rate) 4052{ 4053 int rix = sc->sc_rixmap[rate]; 4054 /* NB: return lowest rix for invalid rate */ 4055 return (rix == 0xff ? 0 : rix); 4056} 4057 4058/* 4059 * Process completed xmit descriptors from the specified queue. 4060 */ 4061static int 4062ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) 4063{ 4064 struct ath_hal *ah = sc->sc_ah; 4065 struct ifnet *ifp = sc->sc_ifp; 4066 struct ieee80211com *ic = ifp->if_l2com; 4067 struct ath_buf *bf, *last; 4068 struct ath_desc *ds, *ds0; 4069 struct ath_tx_status *ts; 4070 struct ieee80211_node *ni; 4071 struct ath_node *an; 4072 int sr, lr, pri, nacked; 4073 HAL_STATUS status; 4074 4075 DPRINTF(sc, ATH_DEBUG_TX_PROC, "%s: tx queue %u head %p link %p\n", 4076 __func__, txq->axq_qnum, 4077 (caddr_t)(uintptr_t) ath_hal_gettxbuf(sc->sc_ah, txq->axq_qnum), 4078 txq->axq_link); 4079 nacked = 0; 4080 for (;;) { 4081 ATH_TXQ_LOCK(txq); 4082 txq->axq_intrcnt = 0; /* reset periodic desc intr count */ 4083 bf = STAILQ_FIRST(&txq->axq_q); 4084 if (bf == NULL) { 4085 ATH_TXQ_UNLOCK(txq); 4086 break; 4087 } 4088 ds0 = &bf->bf_desc[0]; 4089 ds = &bf->bf_desc[bf->bf_nseg - 1]; 4090 ts = &bf->bf_status.ds_txstat; 4091 status = ath_hal_txprocdesc(ah, ds, ts); 4092#ifdef ATH_DEBUG 4093 if (sc->sc_debug & ATH_DEBUG_XMIT_DESC) 4094 ath_printtxbuf(sc, bf, txq->axq_qnum, 0, 4095 status == HAL_OK); 4096#endif 4097 if (status == HAL_EINPROGRESS) { 4098 ATH_TXQ_UNLOCK(txq); 4099 break; 4100 } 4101 ATH_TXQ_REMOVE_HEAD(txq, bf_list); 4102#ifdef IEEE80211_SUPPORT_TDMA 4103 if (txq->axq_depth > 0) { 4104 /* 4105 * More frames follow. Mark the buffer busy 4106 * so it's not re-used while the hardware may 4107 * still re-read the link field in the descriptor. 4108 */ 4109 bf->bf_flags |= ATH_BUF_BUSY; 4110 } else 4111#else 4112 if (txq->axq_depth == 0) 4113#endif 4114 txq->axq_link = NULL; 4115 ATH_TXQ_UNLOCK(txq); 4116 4117 ni = bf->bf_node; 4118 if (ni != NULL) { 4119 an = ATH_NODE(ni); 4120 if (ts->ts_status == 0) { 4121 u_int8_t txant = ts->ts_antenna; 4122 sc->sc_stats.ast_ant_tx[txant]++; 4123 sc->sc_ant_tx[txant]++; 4124 if (ts->ts_finaltsi != 0) 4125 sc->sc_stats.ast_tx_altrate++; 4126 pri = M_WME_GETAC(bf->bf_m); 4127 if (pri >= WME_AC_VO) 4128 ic->ic_wme.wme_hipri_traffic++; 4129 if ((bf->bf_txflags & HAL_TXDESC_NOACK) == 0) 4130 ni->ni_inact = ni->ni_inact_reload; 4131 } else { 4132 if (ts->ts_status & HAL_TXERR_XRETRY) 4133 sc->sc_stats.ast_tx_xretries++; 4134 if (ts->ts_status & HAL_TXERR_FIFO) 4135 sc->sc_stats.ast_tx_fifoerr++; 4136 if (ts->ts_status & HAL_TXERR_FILT) 4137 sc->sc_stats.ast_tx_filtered++; 4138 if (ts->ts_status & HAL_TXERR_XTXOP) 4139 sc->sc_stats.ast_tx_xtxop++; 4140 if (ts->ts_status & HAL_TXERR_TIMER_EXPIRED) 4141 sc->sc_stats.ast_tx_timerexpired++; 4142 4143 /* XXX HAL_TX_DATA_UNDERRUN */ 4144 /* XXX HAL_TX_DELIM_UNDERRUN */ 4145 4146 if (bf->bf_m->m_flags & M_FF) 4147 sc->sc_stats.ast_ff_txerr++; 4148 } 4149 /* XXX when is this valid? */ 4150 if (ts->ts_status & HAL_TX_DESC_CFG_ERR) 4151 sc->sc_stats.ast_tx_desccfgerr++; 4152 4153 sr = ts->ts_shortretry; 4154 lr = ts->ts_longretry; 4155 sc->sc_stats.ast_tx_shortretry += sr; 4156 sc->sc_stats.ast_tx_longretry += lr; 4157 /* 4158 * Hand the descriptor to the rate control algorithm. 4159 */ 4160 if ((ts->ts_status & HAL_TXERR_FILT) == 0 && 4161 (bf->bf_txflags & HAL_TXDESC_NOACK) == 0) { 4162 /* 4163 * If frame was ack'd update statistics, 4164 * including the last rx time used to 4165 * workaround phantom bmiss interrupts. 4166 */ 4167 if (ts->ts_status == 0) { 4168 nacked++; 4169 sc->sc_stats.ast_tx_rssi = ts->ts_rssi; 4170 ATH_RSSI_LPF(sc->sc_halstats.ns_avgtxrssi, 4171 ts->ts_rssi); 4172 } 4173 ath_rate_tx_complete(sc, an, bf); 4174 } 4175 /* 4176 * Do any tx complete callback. Note this must 4177 * be done before releasing the node reference. 4178 */ 4179 if (bf->bf_m->m_flags & M_TXCB) 4180 ieee80211_process_callback(ni, bf->bf_m, 4181 (bf->bf_txflags & HAL_TXDESC_NOACK) == 0 ? 4182 ts->ts_status : HAL_TXERR_XRETRY); 4183 ieee80211_free_node(ni); 4184 } 4185 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, 4186 BUS_DMASYNC_POSTWRITE); 4187 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 4188 4189 m_freem(bf->bf_m); 4190 bf->bf_m = NULL; 4191 bf->bf_node = NULL; 4192 4193 ATH_TXBUF_LOCK(sc); 4194 last = STAILQ_LAST(&sc->sc_txbuf, ath_buf, bf_list); 4195 if (last != NULL) 4196 last->bf_flags &= ~ATH_BUF_BUSY; 4197 STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); 4198 ATH_TXBUF_UNLOCK(sc); 4199 } 4200#ifdef IEEE80211_SUPPORT_SUPERG 4201 /* 4202 * Flush fast-frame staging queue when traffic slows. 4203 */ 4204 if (txq->axq_depth <= 1) 4205 ieee80211_ff_flush(ic, txq->axq_ac); 4206#endif 4207 return nacked; 4208} 4209 4210static __inline int 4211txqactive(struct ath_hal *ah, int qnum) 4212{ 4213 u_int32_t txqs = 1<<qnum; 4214 ath_hal_gettxintrtxqs(ah, &txqs); 4215 return (txqs & (1<<qnum)); 4216} 4217 4218/* 4219 * Deferred processing of transmit interrupt; special-cased 4220 * for a single hardware transmit queue (e.g. 5210 and 5211). 4221 */ 4222static void 4223ath_tx_proc_q0(void *arg, int npending) 4224{ 4225 struct ath_softc *sc = arg; 4226 struct ifnet *ifp = sc->sc_ifp; 4227 4228 if (txqactive(sc->sc_ah, 0) && ath_tx_processq(sc, &sc->sc_txq[0])) 4229 sc->sc_lastrx = ath_hal_gettsf64(sc->sc_ah); 4230 if (txqactive(sc->sc_ah, sc->sc_cabq->axq_qnum)) 4231 ath_tx_processq(sc, sc->sc_cabq); 4232 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 4233 sc->sc_wd_timer = 0; 4234 4235 if (sc->sc_softled) 4236 ath_led_event(sc, sc->sc_txrix); 4237 4238 ath_start(ifp); 4239} 4240 4241/* 4242 * Deferred processing of transmit interrupt; special-cased 4243 * for four hardware queues, 0-3 (e.g. 5212 w/ WME support). 4244 */ 4245static void 4246ath_tx_proc_q0123(void *arg, int npending) 4247{ 4248 struct ath_softc *sc = arg; 4249 struct ifnet *ifp = sc->sc_ifp; 4250 int nacked; 4251 4252 /* 4253 * Process each active queue. 4254 */ 4255 nacked = 0; 4256 if (txqactive(sc->sc_ah, 0)) 4257 nacked += ath_tx_processq(sc, &sc->sc_txq[0]); 4258 if (txqactive(sc->sc_ah, 1)) 4259 nacked += ath_tx_processq(sc, &sc->sc_txq[1]); 4260 if (txqactive(sc->sc_ah, 2)) 4261 nacked += ath_tx_processq(sc, &sc->sc_txq[2]); 4262 if (txqactive(sc->sc_ah, 3)) 4263 nacked += ath_tx_processq(sc, &sc->sc_txq[3]); 4264 if (txqactive(sc->sc_ah, sc->sc_cabq->axq_qnum)) 4265 ath_tx_processq(sc, sc->sc_cabq); 4266 if (nacked) 4267 sc->sc_lastrx = ath_hal_gettsf64(sc->sc_ah); 4268 4269 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 4270 sc->sc_wd_timer = 0; 4271 4272 if (sc->sc_softled) 4273 ath_led_event(sc, sc->sc_txrix); 4274 4275 ath_start(ifp); 4276} 4277 4278/* 4279 * Deferred processing of transmit interrupt. 4280 */ 4281static void 4282ath_tx_proc(void *arg, int npending) 4283{ 4284 struct ath_softc *sc = arg; 4285 struct ifnet *ifp = sc->sc_ifp; 4286 int i, nacked; 4287 4288 /* 4289 * Process each active queue. 4290 */ 4291 nacked = 0; 4292 for (i = 0; i < HAL_NUM_TX_QUEUES; i++) 4293 if (ATH_TXQ_SETUP(sc, i) && txqactive(sc->sc_ah, i)) 4294 nacked += ath_tx_processq(sc, &sc->sc_txq[i]); 4295 if (nacked) 4296 sc->sc_lastrx = ath_hal_gettsf64(sc->sc_ah); 4297 4298 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 4299 sc->sc_wd_timer = 0; 4300 4301 if (sc->sc_softled) 4302 ath_led_event(sc, sc->sc_txrix); 4303 4304 ath_start(ifp); 4305} 4306 4307static void 4308ath_tx_draintxq(struct ath_softc *sc, struct ath_txq *txq) 4309{ 4310#ifdef ATH_DEBUG 4311 struct ath_hal *ah = sc->sc_ah; 4312#endif 4313 struct ieee80211_node *ni; 4314 struct ath_buf *bf; 4315 u_int ix; 4316 4317 /* 4318 * NB: this assumes output has been stopped and 4319 * we do not need to block ath_tx_proc 4320 */ 4321 ATH_TXBUF_LOCK(sc); 4322 bf = STAILQ_LAST(&sc->sc_txbuf, ath_buf, bf_list); 4323 if (bf != NULL) 4324 bf->bf_flags &= ~ATH_BUF_BUSY; 4325 ATH_TXBUF_UNLOCK(sc); 4326 for (ix = 0;; ix++) { 4327 ATH_TXQ_LOCK(txq); 4328 bf = STAILQ_FIRST(&txq->axq_q); 4329 if (bf == NULL) { 4330 txq->axq_link = NULL; 4331 ATH_TXQ_UNLOCK(txq); 4332 break; 4333 } 4334 ATH_TXQ_REMOVE_HEAD(txq, bf_list); 4335 ATH_TXQ_UNLOCK(txq); 4336#ifdef ATH_DEBUG 4337 if (sc->sc_debug & ATH_DEBUG_RESET) { 4338 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 4339 4340 ath_printtxbuf(sc, bf, txq->axq_qnum, ix, 4341 ath_hal_txprocdesc(ah, bf->bf_desc, 4342 &bf->bf_status.ds_txstat) == HAL_OK); 4343 ieee80211_dump_pkt(ic, mtod(bf->bf_m, const uint8_t *), 4344 bf->bf_m->m_len, 0, -1); 4345 } 4346#endif /* ATH_DEBUG */ 4347 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 4348 ni = bf->bf_node; 4349 bf->bf_node = NULL; 4350 if (ni != NULL) { 4351 /* 4352 * Do any callback and reclaim the node reference. 4353 */ 4354 if (bf->bf_m->m_flags & M_TXCB) 4355 ieee80211_process_callback(ni, bf->bf_m, -1); 4356 ieee80211_free_node(ni); 4357 } 4358 m_freem(bf->bf_m); 4359 bf->bf_m = NULL; 4360 bf->bf_flags &= ~ATH_BUF_BUSY; 4361 4362 ATH_TXBUF_LOCK(sc); 4363 STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); 4364 ATH_TXBUF_UNLOCK(sc); 4365 } 4366} 4367 4368static void 4369ath_tx_stopdma(struct ath_softc *sc, struct ath_txq *txq) 4370{ 4371 struct ath_hal *ah = sc->sc_ah; 4372 4373 DPRINTF(sc, ATH_DEBUG_RESET, "%s: tx queue [%u] %p, link %p\n", 4374 __func__, txq->axq_qnum, 4375 (caddr_t)(uintptr_t) ath_hal_gettxbuf(ah, txq->axq_qnum), 4376 txq->axq_link); 4377 (void) ath_hal_stoptxdma(ah, txq->axq_qnum); 4378} 4379 4380/* 4381 * Drain the transmit queues and reclaim resources. 4382 */ 4383static void 4384ath_draintxq(struct ath_softc *sc) 4385{ 4386 struct ath_hal *ah = sc->sc_ah; 4387 struct ifnet *ifp = sc->sc_ifp; 4388 int i; 4389 4390 /* XXX return value */ 4391 if (!sc->sc_invalid) { 4392 /* don't touch the hardware if marked invalid */ 4393 DPRINTF(sc, ATH_DEBUG_RESET, "%s: tx queue [%u] %p, link %p\n", 4394 __func__, sc->sc_bhalq, 4395 (caddr_t)(uintptr_t) ath_hal_gettxbuf(ah, sc->sc_bhalq), 4396 NULL); 4397 (void) ath_hal_stoptxdma(ah, sc->sc_bhalq); 4398 for (i = 0; i < HAL_NUM_TX_QUEUES; i++) 4399 if (ATH_TXQ_SETUP(sc, i)) 4400 ath_tx_stopdma(sc, &sc->sc_txq[i]); 4401 } 4402 for (i = 0; i < HAL_NUM_TX_QUEUES; i++) 4403 if (ATH_TXQ_SETUP(sc, i)) 4404 ath_tx_draintxq(sc, &sc->sc_txq[i]); 4405#ifdef ATH_DEBUG 4406 if (sc->sc_debug & ATH_DEBUG_RESET) { 4407 struct ath_buf *bf = STAILQ_FIRST(&sc->sc_bbuf); 4408 if (bf != NULL && bf->bf_m != NULL) { 4409 ath_printtxbuf(sc, bf, sc->sc_bhalq, 0, 4410 ath_hal_txprocdesc(ah, bf->bf_desc, 4411 &bf->bf_status.ds_txstat) == HAL_OK); 4412 ieee80211_dump_pkt(ifp->if_l2com, 4413 mtod(bf->bf_m, const uint8_t *), bf->bf_m->m_len, 4414 0, -1); 4415 } 4416 } 4417#endif /* ATH_DEBUG */ 4418 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 4419 sc->sc_wd_timer = 0; 4420} 4421 4422/* 4423 * Disable the receive h/w in preparation for a reset. 4424 */ 4425static void 4426ath_stoprecv(struct ath_softc *sc) 4427{ 4428#define PA2DESC(_sc, _pa) \ 4429 ((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \ 4430 ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr))) 4431 struct ath_hal *ah = sc->sc_ah; 4432 4433 ath_hal_stoppcurecv(ah); /* disable PCU */ 4434 ath_hal_setrxfilter(ah, 0); /* clear recv filter */ 4435 ath_hal_stopdmarecv(ah); /* disable DMA engine */ 4436 DELAY(3000); /* 3ms is long enough for 1 frame */ 4437#ifdef ATH_DEBUG 4438 if (sc->sc_debug & (ATH_DEBUG_RESET | ATH_DEBUG_FATAL)) { 4439 struct ath_buf *bf; 4440 u_int ix; 4441 4442 printf("%s: rx queue %p, link %p\n", __func__, 4443 (caddr_t)(uintptr_t) ath_hal_getrxbuf(ah), sc->sc_rxlink); 4444 ix = 0; 4445 STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) { 4446 struct ath_desc *ds = bf->bf_desc; 4447 struct ath_rx_status *rs = &bf->bf_status.ds_rxstat; 4448 HAL_STATUS status = ath_hal_rxprocdesc(ah, ds, 4449 bf->bf_daddr, PA2DESC(sc, ds->ds_link), rs); 4450 if (status == HAL_OK || (sc->sc_debug & ATH_DEBUG_FATAL)) 4451 ath_printrxbuf(sc, bf, ix, status == HAL_OK); 4452 ix++; 4453 } 4454 } 4455#endif 4456 if (sc->sc_rxpending != NULL) { 4457 m_freem(sc->sc_rxpending); 4458 sc->sc_rxpending = NULL; 4459 } 4460 sc->sc_rxlink = NULL; /* just in case */ 4461#undef PA2DESC 4462} 4463 4464/* 4465 * Enable the receive h/w following a reset. 4466 */ 4467static int 4468ath_startrecv(struct ath_softc *sc) 4469{ 4470 struct ath_hal *ah = sc->sc_ah; 4471 struct ath_buf *bf; 4472 4473 sc->sc_rxlink = NULL; 4474 sc->sc_rxpending = NULL; 4475 STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) { 4476 int error = ath_rxbuf_init(sc, bf); 4477 if (error != 0) { 4478 DPRINTF(sc, ATH_DEBUG_RECV, 4479 "%s: ath_rxbuf_init failed %d\n", 4480 __func__, error); 4481 return error; 4482 } 4483 } 4484 4485 bf = STAILQ_FIRST(&sc->sc_rxbuf); 4486 ath_hal_putrxbuf(ah, bf->bf_daddr); 4487 ath_hal_rxena(ah); /* enable recv descriptors */ 4488 ath_mode_init(sc); /* set filters, etc. */ 4489 ath_hal_startpcurecv(ah); /* re-enable PCU/DMA engine */ 4490 return 0; 4491} 4492 4493/* 4494 * Update internal state after a channel change. 4495 */ 4496static void 4497ath_chan_change(struct ath_softc *sc, struct ieee80211_channel *chan) 4498{ 4499 enum ieee80211_phymode mode; 4500 4501 /* 4502 * Change channels and update the h/w rate map 4503 * if we're switching; e.g. 11a to 11b/g. 4504 */ 4505 mode = ieee80211_chan2mode(chan); 4506 if (mode != sc->sc_curmode) 4507 ath_setcurmode(sc, mode); 4508 sc->sc_curchan = chan; 4509} 4510 4511/* 4512 * Set/change channels. If the channel is really being changed, 4513 * it's done by resetting the chip. To accomplish this we must 4514 * first cleanup any pending DMA, then restart stuff after a la 4515 * ath_init. 4516 */ 4517static int 4518ath_chan_set(struct ath_softc *sc, struct ieee80211_channel *chan) 4519{ 4520 struct ifnet *ifp = sc->sc_ifp; 4521 struct ieee80211com *ic = ifp->if_l2com; 4522 struct ath_hal *ah = sc->sc_ah; 4523 4524 DPRINTF(sc, ATH_DEBUG_RESET, "%s: %u (%u MHz, flags 0x%x)\n", 4525 __func__, ieee80211_chan2ieee(ic, chan), 4526 chan->ic_freq, chan->ic_flags); 4527 if (chan != sc->sc_curchan) { 4528 HAL_STATUS status; 4529 /* 4530 * To switch channels clear any pending DMA operations; 4531 * wait long enough for the RX fifo to drain, reset the 4532 * hardware at the new frequency, and then re-enable 4533 * the relevant bits of the h/w. 4534 */ 4535 ath_hal_intrset(ah, 0); /* disable interrupts */ 4536 ath_draintxq(sc); /* clear pending tx frames */ 4537 ath_stoprecv(sc); /* turn off frame recv */ 4538 if (!ath_hal_reset(ah, sc->sc_opmode, chan, AH_TRUE, &status)) { 4539 if_printf(ifp, "%s: unable to reset " 4540 "channel %u (%u MHz, flags 0x%x), hal status %u\n", 4541 __func__, ieee80211_chan2ieee(ic, chan), 4542 chan->ic_freq, chan->ic_flags, status); 4543 return EIO; 4544 } 4545 sc->sc_diversity = ath_hal_getdiversity(ah); 4546 4547 /* Let DFS at it in case it's a DFS channel */ 4548 ath_dfs_radar_enable(sc, ic->ic_curchan); 4549 4550 /* 4551 * Re-enable rx framework. 4552 */ 4553 if (ath_startrecv(sc) != 0) { 4554 if_printf(ifp, "%s: unable to restart recv logic\n", 4555 __func__); 4556 return EIO; 4557 } 4558 4559 /* 4560 * Change channels and update the h/w rate map 4561 * if we're switching; e.g. 11a to 11b/g. 4562 */ 4563 ath_chan_change(sc, chan); 4564 4565 /* 4566 * Reset clears the beacon timers; reset them 4567 * here if needed. 4568 */ 4569 if (sc->sc_beacons) { /* restart beacons */ 4570#ifdef IEEE80211_SUPPORT_TDMA 4571 if (sc->sc_tdma) 4572 ath_tdma_config(sc, NULL); 4573 else 4574#endif 4575 ath_beacon_config(sc, NULL); 4576 } 4577 4578 /* 4579 * Re-enable interrupts. 4580 */ 4581 ath_hal_intrset(ah, sc->sc_imask); 4582 } 4583 return 0; 4584} 4585 4586/* 4587 * Periodically recalibrate the PHY to account 4588 * for temperature/environment changes. 4589 */ 4590static void 4591ath_calibrate(void *arg) 4592{ 4593 struct ath_softc *sc = arg; 4594 struct ath_hal *ah = sc->sc_ah; 4595 struct ifnet *ifp = sc->sc_ifp; 4596 struct ieee80211com *ic = ifp->if_l2com; 4597 HAL_BOOL longCal, isCalDone; 4598 HAL_BOOL aniCal, shortCal = AH_FALSE; 4599 int nextcal; 4600 4601 if (ic->ic_flags & IEEE80211_F_SCAN) /* defer, off channel */ 4602 goto restart; 4603 longCal = (ticks - sc->sc_lastlongcal >= ath_longcalinterval*hz); 4604 aniCal = (ticks - sc->sc_lastani >= ath_anicalinterval*hz/1000); 4605 if (sc->sc_doresetcal) 4606 shortCal = (ticks - sc->sc_lastshortcal >= ath_shortcalinterval*hz/1000); 4607 4608 DPRINTF(sc, ATH_DEBUG_CALIBRATE, "%s: shortCal=%d; longCal=%d; aniCal=%d\n", __func__, shortCal, longCal, aniCal); 4609 if (aniCal) { 4610 sc->sc_stats.ast_ani_cal++; 4611 sc->sc_lastani = ticks; 4612 ath_hal_ani_poll(ah, sc->sc_curchan); 4613 } 4614 4615 if (longCal) { 4616 sc->sc_stats.ast_per_cal++; 4617 sc->sc_lastlongcal = ticks; 4618 if (ath_hal_getrfgain(ah) == HAL_RFGAIN_NEED_CHANGE) { 4619 /* 4620 * Rfgain is out of bounds, reset the chip 4621 * to load new gain values. 4622 */ 4623 DPRINTF(sc, ATH_DEBUG_CALIBRATE, 4624 "%s: rfgain change\n", __func__); 4625 sc->sc_stats.ast_per_rfgain++; 4626 ath_reset(ifp); 4627 } 4628 /* 4629 * If this long cal is after an idle period, then 4630 * reset the data collection state so we start fresh. 4631 */ 4632 if (sc->sc_resetcal) { 4633 (void) ath_hal_calreset(ah, sc->sc_curchan); 4634 sc->sc_lastcalreset = ticks; 4635 sc->sc_lastshortcal = ticks; 4636 sc->sc_resetcal = 0; 4637 sc->sc_doresetcal = AH_TRUE; 4638 } 4639 } 4640 4641 /* Only call if we're doing a short/long cal, not for ANI calibration */ 4642 if (shortCal || longCal) { 4643 if (ath_hal_calibrateN(ah, sc->sc_curchan, longCal, &isCalDone)) { 4644 if (longCal) { 4645 /* 4646 * Calibrate noise floor data again in case of change. 4647 */ 4648 ath_hal_process_noisefloor(ah); 4649 } 4650 } else { 4651 DPRINTF(sc, ATH_DEBUG_ANY, 4652 "%s: calibration of channel %u failed\n", 4653 __func__, sc->sc_curchan->ic_freq); 4654 sc->sc_stats.ast_per_calfail++; 4655 } 4656 if (shortCal) 4657 sc->sc_lastshortcal = ticks; 4658 } 4659 if (!isCalDone) { 4660restart: 4661 /* 4662 * Use a shorter interval to potentially collect multiple 4663 * data samples required to complete calibration. Once 4664 * we're told the work is done we drop back to a longer 4665 * interval between requests. We're more aggressive doing 4666 * work when operating as an AP to improve operation right 4667 * after startup. 4668 */ 4669 sc->sc_lastshortcal = ticks; 4670 nextcal = ath_shortcalinterval*hz/1000; 4671 if (sc->sc_opmode != HAL_M_HOSTAP) 4672 nextcal *= 10; 4673 sc->sc_doresetcal = AH_TRUE; 4674 } else { 4675 /* nextcal should be the shortest time for next event */ 4676 nextcal = ath_longcalinterval*hz; 4677 if (sc->sc_lastcalreset == 0) 4678 sc->sc_lastcalreset = sc->sc_lastlongcal; 4679 else if (ticks - sc->sc_lastcalreset >= ath_resetcalinterval*hz) 4680 sc->sc_resetcal = 1; /* setup reset next trip */ 4681 sc->sc_doresetcal = AH_FALSE; 4682 } 4683 /* ANI calibration may occur more often than short/long/resetcal */ 4684 if (ath_anicalinterval > 0) 4685 nextcal = MIN(nextcal, ath_anicalinterval*hz/1000); 4686 4687 if (nextcal != 0) { 4688 DPRINTF(sc, ATH_DEBUG_CALIBRATE, "%s: next +%u (%sisCalDone)\n", 4689 __func__, nextcal, isCalDone ? "" : "!"); 4690 callout_reset(&sc->sc_cal_ch, nextcal, ath_calibrate, sc); 4691 } else { 4692 DPRINTF(sc, ATH_DEBUG_CALIBRATE, "%s: calibration disabled\n", 4693 __func__); 4694 /* NB: don't rearm timer */ 4695 } 4696} 4697 4698static void 4699ath_scan_start(struct ieee80211com *ic) 4700{ 4701 struct ifnet *ifp = ic->ic_ifp; 4702 struct ath_softc *sc = ifp->if_softc; 4703 struct ath_hal *ah = sc->sc_ah; 4704 u_int32_t rfilt; 4705 4706 /* XXX calibration timer? */ 4707 4708 sc->sc_scanning = 1; 4709 sc->sc_syncbeacon = 0; 4710 rfilt = ath_calcrxfilter(sc); 4711 ath_hal_setrxfilter(ah, rfilt); 4712 ath_hal_setassocid(ah, ifp->if_broadcastaddr, 0); 4713 4714 DPRINTF(sc, ATH_DEBUG_STATE, "%s: RX filter 0x%x bssid %s aid 0\n", 4715 __func__, rfilt, ether_sprintf(ifp->if_broadcastaddr)); 4716} 4717 4718static void 4719ath_scan_end(struct ieee80211com *ic) 4720{ 4721 struct ifnet *ifp = ic->ic_ifp; 4722 struct ath_softc *sc = ifp->if_softc; 4723 struct ath_hal *ah = sc->sc_ah; 4724 u_int32_t rfilt; 4725 4726 sc->sc_scanning = 0; 4727 rfilt = ath_calcrxfilter(sc); 4728 ath_hal_setrxfilter(ah, rfilt); 4729 ath_hal_setassocid(ah, sc->sc_curbssid, sc->sc_curaid); 4730 4731 ath_hal_process_noisefloor(ah); 4732 4733 DPRINTF(sc, ATH_DEBUG_STATE, "%s: RX filter 0x%x bssid %s aid 0x%x\n", 4734 __func__, rfilt, ether_sprintf(sc->sc_curbssid), 4735 sc->sc_curaid); 4736} 4737 4738static void 4739ath_set_channel(struct ieee80211com *ic) 4740{ 4741 struct ifnet *ifp = ic->ic_ifp; 4742 struct ath_softc *sc = ifp->if_softc; 4743 4744 (void) ath_chan_set(sc, ic->ic_curchan); 4745 /* 4746 * If we are returning to our bss channel then mark state 4747 * so the next recv'd beacon's tsf will be used to sync the 4748 * beacon timers. Note that since we only hear beacons in 4749 * sta/ibss mode this has no effect in other operating modes. 4750 */ 4751 if (!sc->sc_scanning && ic->ic_curchan == ic->ic_bsschan) 4752 sc->sc_syncbeacon = 1; 4753} 4754 4755/* 4756 * Walk the vap list and check if there any vap's in RUN state. 4757 */ 4758static int 4759ath_isanyrunningvaps(struct ieee80211vap *this) 4760{ 4761 struct ieee80211com *ic = this->iv_ic; 4762 struct ieee80211vap *vap; 4763 4764 IEEE80211_LOCK_ASSERT(ic); 4765 4766 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 4767 if (vap != this && vap->iv_state >= IEEE80211_S_RUN) 4768 return 1; 4769 } 4770 return 0; 4771} 4772 4773static int 4774ath_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 4775{ 4776 struct ieee80211com *ic = vap->iv_ic; 4777 struct ath_softc *sc = ic->ic_ifp->if_softc; 4778 struct ath_vap *avp = ATH_VAP(vap); 4779 struct ath_hal *ah = sc->sc_ah; 4780 struct ieee80211_node *ni = NULL; 4781 int i, error, stamode; 4782 u_int32_t rfilt; 4783 int csa_run_transition = 0; 4784 static const HAL_LED_STATE leds[] = { 4785 HAL_LED_INIT, /* IEEE80211_S_INIT */ 4786 HAL_LED_SCAN, /* IEEE80211_S_SCAN */ 4787 HAL_LED_AUTH, /* IEEE80211_S_AUTH */ 4788 HAL_LED_ASSOC, /* IEEE80211_S_ASSOC */ 4789 HAL_LED_RUN, /* IEEE80211_S_CAC */ 4790 HAL_LED_RUN, /* IEEE80211_S_RUN */ 4791 HAL_LED_RUN, /* IEEE80211_S_CSA */ 4792 HAL_LED_RUN, /* IEEE80211_S_SLEEP */ 4793 }; 4794 4795 DPRINTF(sc, ATH_DEBUG_STATE, "%s: %s -> %s\n", __func__, 4796 ieee80211_state_name[vap->iv_state], 4797 ieee80211_state_name[nstate]); 4798 4799 if (vap->iv_state == IEEE80211_S_CSA && nstate == IEEE80211_S_RUN) 4800 csa_run_transition = 1; 4801 4802 callout_drain(&sc->sc_cal_ch); 4803 ath_hal_setledstate(ah, leds[nstate]); /* set LED */ 4804 4805 if (nstate == IEEE80211_S_SCAN) { 4806 /* 4807 * Scanning: turn off beacon miss and don't beacon. 4808 * Mark beacon state so when we reach RUN state we'll 4809 * [re]setup beacons. Unblock the task q thread so 4810 * deferred interrupt processing is done. 4811 */ 4812 ath_hal_intrset(ah, 4813 sc->sc_imask &~ (HAL_INT_SWBA | HAL_INT_BMISS)); 4814 sc->sc_imask &= ~(HAL_INT_SWBA | HAL_INT_BMISS); 4815 sc->sc_beacons = 0; 4816 taskqueue_unblock(sc->sc_tq); 4817 } 4818 4819 ni = vap->iv_bss; 4820 rfilt = ath_calcrxfilter(sc); 4821 stamode = (vap->iv_opmode == IEEE80211_M_STA || 4822 vap->iv_opmode == IEEE80211_M_AHDEMO || 4823 vap->iv_opmode == IEEE80211_M_IBSS); 4824 if (stamode && nstate == IEEE80211_S_RUN) { 4825 sc->sc_curaid = ni->ni_associd; 4826 IEEE80211_ADDR_COPY(sc->sc_curbssid, ni->ni_bssid); 4827 ath_hal_setassocid(ah, sc->sc_curbssid, sc->sc_curaid); 4828 } 4829 DPRINTF(sc, ATH_DEBUG_STATE, "%s: RX filter 0x%x bssid %s aid 0x%x\n", 4830 __func__, rfilt, ether_sprintf(sc->sc_curbssid), sc->sc_curaid); 4831 ath_hal_setrxfilter(ah, rfilt); 4832 4833 /* XXX is this to restore keycache on resume? */ 4834 if (vap->iv_opmode != IEEE80211_M_STA && 4835 (vap->iv_flags & IEEE80211_F_PRIVACY)) { 4836 for (i = 0; i < IEEE80211_WEP_NKID; i++) 4837 if (ath_hal_keyisvalid(ah, i)) 4838 ath_hal_keysetmac(ah, i, ni->ni_bssid); 4839 } 4840 4841 /* 4842 * Invoke the parent method to do net80211 work. 4843 */ 4844 error = avp->av_newstate(vap, nstate, arg); 4845 if (error != 0) 4846 goto bad; 4847 4848 if (nstate == IEEE80211_S_RUN) { 4849 /* NB: collect bss node again, it may have changed */ 4850 ni = vap->iv_bss; 4851 4852 DPRINTF(sc, ATH_DEBUG_STATE, 4853 "%s(RUN): iv_flags 0x%08x bintvl %d bssid %s " 4854 "capinfo 0x%04x chan %d\n", __func__, 4855 vap->iv_flags, ni->ni_intval, ether_sprintf(ni->ni_bssid), 4856 ni->ni_capinfo, ieee80211_chan2ieee(ic, ic->ic_curchan)); 4857 4858 switch (vap->iv_opmode) { 4859#ifdef IEEE80211_SUPPORT_TDMA 4860 case IEEE80211_M_AHDEMO: 4861 if ((vap->iv_caps & IEEE80211_C_TDMA) == 0) 4862 break; 4863 /* fall thru... */ 4864#endif 4865 case IEEE80211_M_HOSTAP: 4866 case IEEE80211_M_IBSS: 4867 case IEEE80211_M_MBSS: 4868 /* 4869 * Allocate and setup the beacon frame. 4870 * 4871 * Stop any previous beacon DMA. This may be 4872 * necessary, for example, when an ibss merge 4873 * causes reconfiguration; there will be a state 4874 * transition from RUN->RUN that means we may 4875 * be called with beacon transmission active. 4876 */ 4877 ath_hal_stoptxdma(ah, sc->sc_bhalq); 4878 4879 error = ath_beacon_alloc(sc, ni); 4880 if (error != 0) 4881 goto bad; 4882 /* 4883 * If joining an adhoc network defer beacon timer 4884 * configuration to the next beacon frame so we 4885 * have a current TSF to use. Otherwise we're 4886 * starting an ibss/bss so there's no need to delay; 4887 * if this is the first vap moving to RUN state, then 4888 * beacon state needs to be [re]configured. 4889 */ 4890 if (vap->iv_opmode == IEEE80211_M_IBSS && 4891 ni->ni_tstamp.tsf != 0) { 4892 sc->sc_syncbeacon = 1; 4893 } else if (!sc->sc_beacons) { 4894#ifdef IEEE80211_SUPPORT_TDMA 4895 if (vap->iv_caps & IEEE80211_C_TDMA) 4896 ath_tdma_config(sc, vap); 4897 else 4898#endif 4899 ath_beacon_config(sc, vap); 4900 sc->sc_beacons = 1; 4901 } 4902 break; 4903 case IEEE80211_M_STA: 4904 /* 4905 * Defer beacon timer configuration to the next 4906 * beacon frame so we have a current TSF to use 4907 * (any TSF collected when scanning is likely old). 4908 * However if it's due to a CSA -> RUN transition, 4909 * force a beacon update so we pick up a lack of 4910 * beacons from an AP in CAC and thus force a 4911 * scan. 4912 */ 4913 sc->sc_syncbeacon = 1; 4914 if (csa_run_transition) 4915 ath_beacon_config(sc, vap); 4916 break; 4917 case IEEE80211_M_MONITOR: 4918 /* 4919 * Monitor mode vaps have only INIT->RUN and RUN->RUN 4920 * transitions so we must re-enable interrupts here to 4921 * handle the case of a single monitor mode vap. 4922 */ 4923 ath_hal_intrset(ah, sc->sc_imask); 4924 break; 4925 case IEEE80211_M_WDS: 4926 break; 4927 default: 4928 break; 4929 } 4930 /* 4931 * Let the hal process statistics collected during a 4932 * scan so it can provide calibrated noise floor data. 4933 */ 4934 ath_hal_process_noisefloor(ah); 4935 /* 4936 * Reset rssi stats; maybe not the best place... 4937 */ 4938 sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; 4939 sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; 4940 sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; 4941 /* 4942 * Finally, start any timers and the task q thread 4943 * (in case we didn't go through SCAN state). 4944 */ 4945 if (ath_longcalinterval != 0) { 4946 /* start periodic recalibration timer */ 4947 callout_reset(&sc->sc_cal_ch, 1, ath_calibrate, sc); 4948 } else { 4949 DPRINTF(sc, ATH_DEBUG_CALIBRATE, 4950 "%s: calibration disabled\n", __func__); 4951 } 4952 taskqueue_unblock(sc->sc_tq); 4953 } else if (nstate == IEEE80211_S_INIT) { 4954 /* 4955 * If there are no vaps left in RUN state then 4956 * shutdown host/driver operation: 4957 * o disable interrupts 4958 * o disable the task queue thread 4959 * o mark beacon processing as stopped 4960 */ 4961 if (!ath_isanyrunningvaps(vap)) { 4962 sc->sc_imask &= ~(HAL_INT_SWBA | HAL_INT_BMISS); 4963 /* disable interrupts */ 4964 ath_hal_intrset(ah, sc->sc_imask &~ HAL_INT_GLOBAL); 4965 taskqueue_block(sc->sc_tq); 4966 sc->sc_beacons = 0; 4967 } 4968#ifdef IEEE80211_SUPPORT_TDMA 4969 ath_hal_setcca(ah, AH_TRUE); 4970#endif 4971 } 4972bad: 4973 return error; 4974} 4975 4976/* 4977 * Allocate a key cache slot to the station so we can 4978 * setup a mapping from key index to node. The key cache 4979 * slot is needed for managing antenna state and for 4980 * compression when stations do not use crypto. We do 4981 * it uniliaterally here; if crypto is employed this slot 4982 * will be reassigned. 4983 */ 4984static void 4985ath_setup_stationkey(struct ieee80211_node *ni) 4986{ 4987 struct ieee80211vap *vap = ni->ni_vap; 4988 struct ath_softc *sc = vap->iv_ic->ic_ifp->if_softc; 4989 ieee80211_keyix keyix, rxkeyix; 4990 4991 if (!ath_key_alloc(vap, &ni->ni_ucastkey, &keyix, &rxkeyix)) { 4992 /* 4993 * Key cache is full; we'll fall back to doing 4994 * the more expensive lookup in software. Note 4995 * this also means no h/w compression. 4996 */ 4997 /* XXX msg+statistic */ 4998 } else { 4999 /* XXX locking? */ 5000 ni->ni_ucastkey.wk_keyix = keyix; 5001 ni->ni_ucastkey.wk_rxkeyix = rxkeyix; 5002 /* NB: must mark device key to get called back on delete */ 5003 ni->ni_ucastkey.wk_flags |= IEEE80211_KEY_DEVKEY; 5004 IEEE80211_ADDR_COPY(ni->ni_ucastkey.wk_macaddr, ni->ni_macaddr); 5005 /* NB: this will create a pass-thru key entry */ 5006 ath_keyset(sc, &ni->ni_ucastkey, vap->iv_bss); 5007 } 5008} 5009 5010/* 5011 * Setup driver-specific state for a newly associated node. 5012 * Note that we're called also on a re-associate, the isnew 5013 * param tells us if this is the first time or not. 5014 */ 5015static void 5016ath_newassoc(struct ieee80211_node *ni, int isnew) 5017{ 5018 struct ath_node *an = ATH_NODE(ni); 5019 struct ieee80211vap *vap = ni->ni_vap; 5020 struct ath_softc *sc = vap->iv_ic->ic_ifp->if_softc; 5021 const struct ieee80211_txparam *tp = ni->ni_txparms; 5022 5023 an->an_mcastrix = ath_tx_findrix(sc, tp->mcastrate); 5024 an->an_mgmtrix = ath_tx_findrix(sc, tp->mgmtrate); 5025 5026 ath_rate_newassoc(sc, an, isnew); 5027 if (isnew && 5028 (vap->iv_flags & IEEE80211_F_PRIVACY) == 0 && sc->sc_hasclrkey && 5029 ni->ni_ucastkey.wk_keyix == IEEE80211_KEYIX_NONE) 5030 ath_setup_stationkey(ni); 5031} 5032 5033static int 5034ath_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *reg, 5035 int nchans, struct ieee80211_channel chans[]) 5036{ 5037 struct ath_softc *sc = ic->ic_ifp->if_softc; 5038 struct ath_hal *ah = sc->sc_ah; 5039 HAL_STATUS status; 5040 5041 DPRINTF(sc, ATH_DEBUG_REGDOMAIN, 5042 "%s: rd %u cc %u location %c%s\n", 5043 __func__, reg->regdomain, reg->country, reg->location, 5044 reg->ecm ? " ecm" : ""); 5045 5046 status = ath_hal_set_channels(ah, chans, nchans, 5047 reg->country, reg->regdomain); 5048 if (status != HAL_OK) { 5049 DPRINTF(sc, ATH_DEBUG_REGDOMAIN, "%s: failed, status %u\n", 5050 __func__, status); 5051 return EINVAL; /* XXX */ 5052 } 5053 5054 return 0; 5055} 5056 5057static void 5058ath_getradiocaps(struct ieee80211com *ic, 5059 int maxchans, int *nchans, struct ieee80211_channel chans[]) 5060{ 5061 struct ath_softc *sc = ic->ic_ifp->if_softc; 5062 struct ath_hal *ah = sc->sc_ah; 5063 5064 DPRINTF(sc, ATH_DEBUG_REGDOMAIN, "%s: use rd %u cc %d\n", 5065 __func__, SKU_DEBUG, CTRY_DEFAULT); 5066 5067 /* XXX check return */ 5068 (void) ath_hal_getchannels(ah, chans, maxchans, nchans, 5069 HAL_MODE_ALL, CTRY_DEFAULT, SKU_DEBUG, AH_TRUE); 5070 5071} 5072 5073static int 5074ath_getchannels(struct ath_softc *sc) 5075{ 5076 struct ifnet *ifp = sc->sc_ifp; 5077 struct ieee80211com *ic = ifp->if_l2com; 5078 struct ath_hal *ah = sc->sc_ah; 5079 HAL_STATUS status; 5080 5081 /* 5082 * Collect channel set based on EEPROM contents. 5083 */ 5084 status = ath_hal_init_channels(ah, ic->ic_channels, IEEE80211_CHAN_MAX, 5085 &ic->ic_nchans, HAL_MODE_ALL, CTRY_DEFAULT, SKU_NONE, AH_TRUE); 5086 if (status != HAL_OK) { 5087 if_printf(ifp, "%s: unable to collect channel list from hal, " 5088 "status %d\n", __func__, status); 5089 return EINVAL; 5090 } 5091 (void) ath_hal_getregdomain(ah, &sc->sc_eerd); 5092 ath_hal_getcountrycode(ah, &sc->sc_eecc); /* NB: cannot fail */ 5093 /* XXX map Atheros sku's to net80211 SKU's */ 5094 /* XXX net80211 types too small */ 5095 ic->ic_regdomain.regdomain = (uint16_t) sc->sc_eerd; 5096 ic->ic_regdomain.country = (uint16_t) sc->sc_eecc; 5097 ic->ic_regdomain.isocc[0] = ' '; /* XXX don't know */ 5098 ic->ic_regdomain.isocc[1] = ' '; 5099 5100 ic->ic_regdomain.ecm = 1; 5101 ic->ic_regdomain.location = 'I'; 5102 5103 DPRINTF(sc, ATH_DEBUG_REGDOMAIN, 5104 "%s: eeprom rd %u cc %u (mapped rd %u cc %u) location %c%s\n", 5105 __func__, sc->sc_eerd, sc->sc_eecc, 5106 ic->ic_regdomain.regdomain, ic->ic_regdomain.country, 5107 ic->ic_regdomain.location, ic->ic_regdomain.ecm ? " ecm" : ""); 5108 return 0; 5109} 5110 5111static void 5112ath_led_done(void *arg) 5113{ 5114 struct ath_softc *sc = arg; 5115 5116 sc->sc_blinking = 0; 5117} 5118 5119/* 5120 * Turn the LED off: flip the pin and then set a timer so no 5121 * update will happen for the specified duration. 5122 */ 5123static void 5124ath_led_off(void *arg) 5125{ 5126 struct ath_softc *sc = arg; 5127 5128 ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, !sc->sc_ledon); 5129 callout_reset(&sc->sc_ledtimer, sc->sc_ledoff, ath_led_done, sc); 5130} 5131 5132/* 5133 * Blink the LED according to the specified on/off times. 5134 */ 5135static void 5136ath_led_blink(struct ath_softc *sc, int on, int off) 5137{ 5138 DPRINTF(sc, ATH_DEBUG_LED, "%s: on %u off %u\n", __func__, on, off); 5139 ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, sc->sc_ledon); 5140 sc->sc_blinking = 1; 5141 sc->sc_ledoff = off; 5142 callout_reset(&sc->sc_ledtimer, on, ath_led_off, sc); 5143} 5144 5145static void 5146ath_led_event(struct ath_softc *sc, int rix) 5147{ 5148 sc->sc_ledevent = ticks; /* time of last event */ 5149 if (sc->sc_blinking) /* don't interrupt active blink */ 5150 return; 5151 ath_led_blink(sc, sc->sc_hwmap[rix].ledon, sc->sc_hwmap[rix].ledoff); 5152} 5153 5154static int 5155ath_rate_setup(struct ath_softc *sc, u_int mode) 5156{ 5157 struct ath_hal *ah = sc->sc_ah; 5158 const HAL_RATE_TABLE *rt; 5159 5160 switch (mode) { 5161 case IEEE80211_MODE_11A: 5162 rt = ath_hal_getratetable(ah, HAL_MODE_11A); 5163 break; 5164 case IEEE80211_MODE_HALF: 5165 rt = ath_hal_getratetable(ah, HAL_MODE_11A_HALF_RATE); 5166 break; 5167 case IEEE80211_MODE_QUARTER: 5168 rt = ath_hal_getratetable(ah, HAL_MODE_11A_QUARTER_RATE); 5169 break; 5170 case IEEE80211_MODE_11B: 5171 rt = ath_hal_getratetable(ah, HAL_MODE_11B); 5172 break; 5173 case IEEE80211_MODE_11G: 5174 rt = ath_hal_getratetable(ah, HAL_MODE_11G); 5175 break; 5176 case IEEE80211_MODE_TURBO_A: 5177 rt = ath_hal_getratetable(ah, HAL_MODE_108A); 5178 break; 5179 case IEEE80211_MODE_TURBO_G: 5180 rt = ath_hal_getratetable(ah, HAL_MODE_108G); 5181 break; 5182 case IEEE80211_MODE_STURBO_A: 5183 rt = ath_hal_getratetable(ah, HAL_MODE_TURBO); 5184 break; 5185 case IEEE80211_MODE_11NA: 5186 rt = ath_hal_getratetable(ah, HAL_MODE_11NA_HT20); 5187 break; 5188 case IEEE80211_MODE_11NG: 5189 rt = ath_hal_getratetable(ah, HAL_MODE_11NG_HT20); 5190 break; 5191 default: 5192 DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid mode %u\n", 5193 __func__, mode); 5194 return 0; 5195 } 5196 sc->sc_rates[mode] = rt; 5197 return (rt != NULL); 5198} 5199 5200static void 5201ath_setcurmode(struct ath_softc *sc, enum ieee80211_phymode mode) 5202{ 5203#define N(a) (sizeof(a)/sizeof(a[0])) 5204 /* NB: on/off times from the Atheros NDIS driver, w/ permission */ 5205 static const struct { 5206 u_int rate; /* tx/rx 802.11 rate */ 5207 u_int16_t timeOn; /* LED on time (ms) */ 5208 u_int16_t timeOff; /* LED off time (ms) */ 5209 } blinkrates[] = { 5210 { 108, 40, 10 }, 5211 { 96, 44, 11 }, 5212 { 72, 50, 13 }, 5213 { 48, 57, 14 }, 5214 { 36, 67, 16 }, 5215 { 24, 80, 20 }, 5216 { 22, 100, 25 }, 5217 { 18, 133, 34 }, 5218 { 12, 160, 40 }, 5219 { 10, 200, 50 }, 5220 { 6, 240, 58 }, 5221 { 4, 267, 66 }, 5222 { 2, 400, 100 }, 5223 { 0, 500, 130 }, 5224 /* XXX half/quarter rates */ 5225 }; 5226 const HAL_RATE_TABLE *rt; 5227 int i, j; 5228 5229 memset(sc->sc_rixmap, 0xff, sizeof(sc->sc_rixmap)); 5230 rt = sc->sc_rates[mode]; 5231 KASSERT(rt != NULL, ("no h/w rate set for phy mode %u", mode)); 5232 for (i = 0; i < rt->rateCount; i++) { 5233 uint8_t ieeerate = rt->info[i].dot11Rate & IEEE80211_RATE_VAL; 5234 if (rt->info[i].phy != IEEE80211_T_HT) 5235 sc->sc_rixmap[ieeerate] = i; 5236 else 5237 sc->sc_rixmap[ieeerate | IEEE80211_RATE_MCS] = i; 5238 } 5239 memset(sc->sc_hwmap, 0, sizeof(sc->sc_hwmap)); 5240 for (i = 0; i < N(sc->sc_hwmap); i++) { 5241 if (i >= rt->rateCount) { 5242 sc->sc_hwmap[i].ledon = (500 * hz) / 1000; 5243 sc->sc_hwmap[i].ledoff = (130 * hz) / 1000; 5244 continue; 5245 } 5246 sc->sc_hwmap[i].ieeerate = 5247 rt->info[i].dot11Rate & IEEE80211_RATE_VAL; 5248 if (rt->info[i].phy == IEEE80211_T_HT) 5249 sc->sc_hwmap[i].ieeerate |= IEEE80211_RATE_MCS; 5250 sc->sc_hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD; 5251 if (rt->info[i].shortPreamble || 5252 rt->info[i].phy == IEEE80211_T_OFDM) 5253 sc->sc_hwmap[i].txflags |= IEEE80211_RADIOTAP_F_SHORTPRE; 5254 sc->sc_hwmap[i].rxflags = sc->sc_hwmap[i].txflags; 5255 for (j = 0; j < N(blinkrates)-1; j++) 5256 if (blinkrates[j].rate == sc->sc_hwmap[i].ieeerate) 5257 break; 5258 /* NB: this uses the last entry if the rate isn't found */ 5259 /* XXX beware of overlow */ 5260 sc->sc_hwmap[i].ledon = (blinkrates[j].timeOn * hz) / 1000; 5261 sc->sc_hwmap[i].ledoff = (blinkrates[j].timeOff * hz) / 1000; 5262 } 5263 sc->sc_currates = rt; 5264 sc->sc_curmode = mode; 5265 /* 5266 * All protection frames are transmited at 2Mb/s for 5267 * 11g, otherwise at 1Mb/s. 5268 */ 5269 if (mode == IEEE80211_MODE_11G) 5270 sc->sc_protrix = ath_tx_findrix(sc, 2*2); 5271 else 5272 sc->sc_protrix = ath_tx_findrix(sc, 2*1); 5273 /* NB: caller is responsible for resetting rate control state */ 5274#undef N 5275} 5276 5277static void 5278ath_watchdog(void *arg) 5279{ 5280 struct ath_softc *sc = arg; 5281 5282 if (sc->sc_wd_timer != 0 && --sc->sc_wd_timer == 0) { 5283 struct ifnet *ifp = sc->sc_ifp; 5284 uint32_t hangs; 5285 5286 if (ath_hal_gethangstate(sc->sc_ah, 0xffff, &hangs) && 5287 hangs != 0) { 5288 if_printf(ifp, "%s hang detected (0x%x)\n", 5289 hangs & 0xff ? "bb" : "mac", hangs); 5290 } else 5291 if_printf(ifp, "device timeout\n"); 5292 ath_reset(ifp); 5293 ifp->if_oerrors++; 5294 sc->sc_stats.ast_watchdog++; 5295 } 5296 callout_schedule(&sc->sc_wd_ch, hz); 5297} 5298 5299#ifdef ATH_DIAGAPI 5300/* 5301 * Diagnostic interface to the HAL. This is used by various 5302 * tools to do things like retrieve register contents for 5303 * debugging. The mechanism is intentionally opaque so that 5304 * it can change frequently w/o concern for compatiblity. 5305 */ 5306static int 5307ath_ioctl_diag(struct ath_softc *sc, struct ath_diag *ad) 5308{ 5309 struct ath_hal *ah = sc->sc_ah; 5310 u_int id = ad->ad_id & ATH_DIAG_ID; 5311 void *indata = NULL; 5312 void *outdata = NULL; 5313 u_int32_t insize = ad->ad_in_size; 5314 u_int32_t outsize = ad->ad_out_size; 5315 int error = 0; 5316 5317 if (ad->ad_id & ATH_DIAG_IN) { 5318 /* 5319 * Copy in data. 5320 */ 5321 indata = malloc(insize, M_TEMP, M_NOWAIT); 5322 if (indata == NULL) { 5323 error = ENOMEM; 5324 goto bad; 5325 } 5326 error = copyin(ad->ad_in_data, indata, insize); 5327 if (error) 5328 goto bad; 5329 } 5330 if (ad->ad_id & ATH_DIAG_DYN) { 5331 /* 5332 * Allocate a buffer for the results (otherwise the HAL 5333 * returns a pointer to a buffer where we can read the 5334 * results). Note that we depend on the HAL leaving this 5335 * pointer for us to use below in reclaiming the buffer; 5336 * may want to be more defensive. 5337 */ 5338 outdata = malloc(outsize, M_TEMP, M_NOWAIT); 5339 if (outdata == NULL) { 5340 error = ENOMEM; 5341 goto bad; 5342 } 5343 } 5344 if (ath_hal_getdiagstate(ah, id, indata, insize, &outdata, &outsize)) { 5345 if (outsize < ad->ad_out_size) 5346 ad->ad_out_size = outsize; 5347 if (outdata != NULL) 5348 error = copyout(outdata, ad->ad_out_data, 5349 ad->ad_out_size); 5350 } else { 5351 error = EINVAL; 5352 } 5353bad: 5354 if ((ad->ad_id & ATH_DIAG_IN) && indata != NULL) 5355 free(indata, M_TEMP); 5356 if ((ad->ad_id & ATH_DIAG_DYN) && outdata != NULL) 5357 free(outdata, M_TEMP); 5358 return error; 5359} 5360#endif /* ATH_DIAGAPI */ 5361 5362static int 5363ath_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 5364{ 5365#define IS_RUNNING(ifp) \ 5366 ((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING)) 5367 struct ath_softc *sc = ifp->if_softc; 5368 struct ieee80211com *ic = ifp->if_l2com; 5369 struct ifreq *ifr = (struct ifreq *)data; 5370 const HAL_RATE_TABLE *rt; 5371 int error = 0; 5372 5373 switch (cmd) { 5374 case SIOCSIFFLAGS: 5375 ATH_LOCK(sc); 5376 if (IS_RUNNING(ifp)) { 5377 /* 5378 * To avoid rescanning another access point, 5379 * do not call ath_init() here. Instead, 5380 * only reflect promisc mode settings. 5381 */ 5382 ath_mode_init(sc); 5383 } else if (ifp->if_flags & IFF_UP) { 5384 /* 5385 * Beware of being called during attach/detach 5386 * to reset promiscuous mode. In that case we 5387 * will still be marked UP but not RUNNING. 5388 * However trying to re-init the interface 5389 * is the wrong thing to do as we've already 5390 * torn down much of our state. There's 5391 * probably a better way to deal with this. 5392 */ 5393 if (!sc->sc_invalid) 5394 ath_init(sc); /* XXX lose error */ 5395 } else { 5396 ath_stop_locked(ifp); 5397#ifdef notyet 5398 /* XXX must wakeup in places like ath_vap_delete */ 5399 if (!sc->sc_invalid) 5400 ath_hal_setpower(sc->sc_ah, HAL_PM_FULL_SLEEP); 5401#endif 5402 } 5403 ATH_UNLOCK(sc); 5404 break; 5405 case SIOCGIFMEDIA: 5406 case SIOCSIFMEDIA: 5407 error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd); 5408 break; 5409 case SIOCGATHSTATS: 5410 /* NB: embed these numbers to get a consistent view */ 5411 sc->sc_stats.ast_tx_packets = ifp->if_opackets; 5412 sc->sc_stats.ast_rx_packets = ifp->if_ipackets; 5413 sc->sc_stats.ast_tx_rssi = ATH_RSSI(sc->sc_halstats.ns_avgtxrssi); 5414 sc->sc_stats.ast_rx_rssi = ATH_RSSI(sc->sc_halstats.ns_avgrssi); 5415#ifdef IEEE80211_SUPPORT_TDMA 5416 sc->sc_stats.ast_tdma_tsfadjp = TDMA_AVG(sc->sc_avgtsfdeltap); 5417 sc->sc_stats.ast_tdma_tsfadjm = TDMA_AVG(sc->sc_avgtsfdeltam); 5418#endif 5419 rt = sc->sc_currates; 5420 sc->sc_stats.ast_tx_rate = 5421 rt->info[sc->sc_txrix].dot11Rate &~ IEEE80211_RATE_BASIC; 5422 if (rt->info[sc->sc_txrix].phy & IEEE80211_T_HT) 5423 sc->sc_stats.ast_tx_rate |= IEEE80211_RATE_MCS; 5424 return copyout(&sc->sc_stats, 5425 ifr->ifr_data, sizeof (sc->sc_stats)); 5426 case SIOCZATHSTATS: 5427 error = priv_check(curthread, PRIV_DRIVER); 5428 if (error == 0) 5429 memset(&sc->sc_stats, 0, sizeof(sc->sc_stats)); 5430 break; 5431#ifdef ATH_DIAGAPI 5432 case SIOCGATHDIAG: 5433 error = ath_ioctl_diag(sc, (struct ath_diag *) ifr); 5434 break; 5435 case SIOCGATHPHYERR: 5436 error = ath_ioctl_phyerr(sc,(struct ath_diag*) ifr); 5437 break; 5438#endif 5439 case SIOCGIFADDR: 5440 error = ether_ioctl(ifp, cmd, data); 5441 break; 5442 default: 5443 error = EINVAL; 5444 break; 5445 } 5446 return error; 5447#undef IS_RUNNING 5448} 5449 5450/* 5451 * Announce various information on device/driver attach. 5452 */ 5453static void 5454ath_announce(struct ath_softc *sc) 5455{ 5456 struct ifnet *ifp = sc->sc_ifp; 5457 struct ath_hal *ah = sc->sc_ah; 5458 5459 if_printf(ifp, "AR%s mac %d.%d RF%s phy %d.%d\n", 5460 ath_hal_mac_name(ah), ah->ah_macVersion, ah->ah_macRev, 5461 ath_hal_rf_name(ah), ah->ah_phyRev >> 4, ah->ah_phyRev & 0xf); 5462 if (bootverbose) { 5463 int i; 5464 for (i = 0; i <= WME_AC_VO; i++) { 5465 struct ath_txq *txq = sc->sc_ac2q[i]; 5466 if_printf(ifp, "Use hw queue %u for %s traffic\n", 5467 txq->axq_qnum, ieee80211_wme_acnames[i]); 5468 } 5469 if_printf(ifp, "Use hw queue %u for CAB traffic\n", 5470 sc->sc_cabq->axq_qnum); 5471 if_printf(ifp, "Use hw queue %u for beacons\n", sc->sc_bhalq); 5472 } 5473 if (ath_rxbuf != ATH_RXBUF) 5474 if_printf(ifp, "using %u rx buffers\n", ath_rxbuf); 5475 if (ath_txbuf != ATH_TXBUF) 5476 if_printf(ifp, "using %u tx buffers\n", ath_txbuf); 5477 if (sc->sc_mcastkey && bootverbose) 5478 if_printf(ifp, "using multicast key search\n"); 5479} 5480 5481#ifdef IEEE80211_SUPPORT_TDMA 5482static void 5483ath_tdma_settimers(struct ath_softc *sc, u_int32_t nexttbtt, u_int32_t bintval) 5484{ 5485 struct ath_hal *ah = sc->sc_ah; 5486 HAL_BEACON_TIMERS bt; 5487 5488 bt.bt_intval = bintval | HAL_BEACON_ENA; 5489 bt.bt_nexttbtt = nexttbtt; 5490 bt.bt_nextdba = (nexttbtt<<3) - sc->sc_tdmadbaprep; 5491 bt.bt_nextswba = (nexttbtt<<3) - sc->sc_tdmaswbaprep; 5492 bt.bt_nextatim = nexttbtt+1; 5493 /* Enables TBTT, DBA, SWBA timers by default */ 5494 bt.bt_flags = 0; 5495 ath_hal_beaconsettimers(ah, &bt); 5496} 5497 5498/* 5499 * Calculate the beacon interval. This is periodic in the 5500 * superframe for the bss. We assume each station is configured 5501 * identically wrt transmit rate so the guard time we calculate 5502 * above will be the same on all stations. Note we need to 5503 * factor in the xmit time because the hardware will schedule 5504 * a frame for transmit if the start of the frame is within 5505 * the burst time. When we get hardware that properly kills 5506 * frames in the PCU we can reduce/eliminate the guard time. 5507 * 5508 * Roundup to 1024 is so we have 1 TU buffer in the guard time 5509 * to deal with the granularity of the nexttbtt timer. 11n MAC's 5510 * with 1us timer granularity should allow us to reduce/eliminate 5511 * this. 5512 */ 5513static void 5514ath_tdma_bintvalsetup(struct ath_softc *sc, 5515 const struct ieee80211_tdma_state *tdma) 5516{ 5517 /* copy from vap state (XXX check all vaps have same value?) */ 5518 sc->sc_tdmaslotlen = tdma->tdma_slotlen; 5519 5520 sc->sc_tdmabintval = roundup((sc->sc_tdmaslotlen+sc->sc_tdmaguard) * 5521 tdma->tdma_slotcnt, 1024); 5522 sc->sc_tdmabintval >>= 10; /* TSF -> TU */ 5523 if (sc->sc_tdmabintval & 1) 5524 sc->sc_tdmabintval++; 5525 5526 if (tdma->tdma_slot == 0) { 5527 /* 5528 * Only slot 0 beacons; other slots respond. 5529 */ 5530 sc->sc_imask |= HAL_INT_SWBA; 5531 sc->sc_tdmaswba = 0; /* beacon immediately */ 5532 } else { 5533 /* XXX all vaps must be slot 0 or slot !0 */ 5534 sc->sc_imask &= ~HAL_INT_SWBA; 5535 } 5536} 5537 5538/* 5539 * Max 802.11 overhead. This assumes no 4-address frames and 5540 * the encapsulation done by ieee80211_encap (llc). We also 5541 * include potential crypto overhead. 5542 */ 5543#define IEEE80211_MAXOVERHEAD \ 5544 (sizeof(struct ieee80211_qosframe) \ 5545 + sizeof(struct llc) \ 5546 + IEEE80211_ADDR_LEN \ 5547 + IEEE80211_WEP_IVLEN \ 5548 + IEEE80211_WEP_KIDLEN \ 5549 + IEEE80211_WEP_CRCLEN \ 5550 + IEEE80211_WEP_MICLEN \ 5551 + IEEE80211_CRC_LEN) 5552 5553/* 5554 * Setup initially for tdma operation. Start the beacon 5555 * timers and enable SWBA if we are slot 0. Otherwise 5556 * we wait for slot 0 to arrive so we can sync up before 5557 * starting to transmit. 5558 */ 5559static void 5560ath_tdma_config(struct ath_softc *sc, struct ieee80211vap *vap) 5561{ 5562 struct ath_hal *ah = sc->sc_ah; 5563 struct ifnet *ifp = sc->sc_ifp; 5564 struct ieee80211com *ic = ifp->if_l2com; 5565 const struct ieee80211_txparam *tp; 5566 const struct ieee80211_tdma_state *tdma = NULL; 5567 int rix; 5568 5569 if (vap == NULL) { 5570 vap = TAILQ_FIRST(&ic->ic_vaps); /* XXX */ 5571 if (vap == NULL) { 5572 if_printf(ifp, "%s: no vaps?\n", __func__); 5573 return; 5574 } 5575 } 5576 tp = vap->iv_bss->ni_txparms; 5577 /* 5578 * Calculate the guard time for each slot. This is the 5579 * time to send a maximal-size frame according to the 5580 * fixed/lowest transmit rate. Note that the interface 5581 * mtu does not include the 802.11 overhead so we must 5582 * tack that on (ath_hal_computetxtime includes the 5583 * preamble and plcp in it's calculation). 5584 */ 5585 tdma = vap->iv_tdma; 5586 if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) 5587 rix = ath_tx_findrix(sc, tp->ucastrate); 5588 else 5589 rix = ath_tx_findrix(sc, tp->mcastrate); 5590 /* XXX short preamble assumed */ 5591 sc->sc_tdmaguard = ath_hal_computetxtime(ah, sc->sc_currates, 5592 ifp->if_mtu + IEEE80211_MAXOVERHEAD, rix, AH_TRUE); 5593 5594 ath_hal_intrset(ah, 0); 5595 5596 ath_beaconq_config(sc); /* setup h/w beacon q */ 5597 if (sc->sc_setcca) 5598 ath_hal_setcca(ah, AH_FALSE); /* disable CCA */ 5599 ath_tdma_bintvalsetup(sc, tdma); /* calculate beacon interval */ 5600 ath_tdma_settimers(sc, sc->sc_tdmabintval, 5601 sc->sc_tdmabintval | HAL_BEACON_RESET_TSF); 5602 sc->sc_syncbeacon = 0; 5603 5604 sc->sc_avgtsfdeltap = TDMA_DUMMY_MARKER; 5605 sc->sc_avgtsfdeltam = TDMA_DUMMY_MARKER; 5606 5607 ath_hal_intrset(ah, sc->sc_imask); 5608 5609 DPRINTF(sc, ATH_DEBUG_TDMA, "%s: slot %u len %uus cnt %u " 5610 "bsched %u guard %uus bintval %u TU dba prep %u\n", __func__, 5611 tdma->tdma_slot, tdma->tdma_slotlen, tdma->tdma_slotcnt, 5612 tdma->tdma_bintval, sc->sc_tdmaguard, sc->sc_tdmabintval, 5613 sc->sc_tdmadbaprep); 5614} 5615 5616/* 5617 * Update tdma operation. Called from the 802.11 layer 5618 * when a beacon is received from the TDMA station operating 5619 * in the slot immediately preceding us in the bss. Use 5620 * the rx timestamp for the beacon frame to update our 5621 * beacon timers so we follow their schedule. Note that 5622 * by using the rx timestamp we implicitly include the 5623 * propagation delay in our schedule. 5624 */ 5625static void 5626ath_tdma_update(struct ieee80211_node *ni, 5627 const struct ieee80211_tdma_param *tdma, int changed) 5628{ 5629#define TSF_TO_TU(_h,_l) \ 5630 ((((u_int32_t)(_h)) << 22) | (((u_int32_t)(_l)) >> 10)) 5631#define TU_TO_TSF(_tu) (((u_int64_t)(_tu)) << 10) 5632 struct ieee80211vap *vap = ni->ni_vap; 5633 struct ieee80211com *ic = ni->ni_ic; 5634 struct ath_softc *sc = ic->ic_ifp->if_softc; 5635 struct ath_hal *ah = sc->sc_ah; 5636 const HAL_RATE_TABLE *rt = sc->sc_currates; 5637 u_int64_t tsf, rstamp, nextslot, nexttbtt; 5638 u_int32_t txtime, nextslottu; 5639 int32_t tudelta, tsfdelta; 5640 const struct ath_rx_status *rs; 5641 int rix; 5642 5643 sc->sc_stats.ast_tdma_update++; 5644 5645 /* 5646 * Check for and adopt configuration changes. 5647 */ 5648 if (changed != 0) { 5649 const struct ieee80211_tdma_state *ts = vap->iv_tdma; 5650 5651 ath_tdma_bintvalsetup(sc, ts); 5652 if (changed & TDMA_UPDATE_SLOTLEN) 5653 ath_wme_update(ic); 5654 5655 DPRINTF(sc, ATH_DEBUG_TDMA, 5656 "%s: adopt slot %u slotcnt %u slotlen %u us " 5657 "bintval %u TU\n", __func__, 5658 ts->tdma_slot, ts->tdma_slotcnt, ts->tdma_slotlen, 5659 sc->sc_tdmabintval); 5660 5661 /* XXX right? */ 5662 ath_hal_intrset(ah, sc->sc_imask); 5663 /* NB: beacon timers programmed below */ 5664 } 5665 5666 /* extend rx timestamp to 64 bits */ 5667 rs = sc->sc_lastrs; 5668 tsf = ath_hal_gettsf64(ah); 5669 rstamp = ath_extend_tsf(sc, rs->rs_tstamp, tsf); 5670 /* 5671 * The rx timestamp is set by the hardware on completing 5672 * reception (at the point where the rx descriptor is DMA'd 5673 * to the host). To find the start of our next slot we 5674 * must adjust this time by the time required to send 5675 * the packet just received. 5676 */ 5677 rix = rt->rateCodeToIndex[rs->rs_rate]; 5678 txtime = ath_hal_computetxtime(ah, rt, rs->rs_datalen, rix, 5679 rt->info[rix].shortPreamble); 5680 /* NB: << 9 is to cvt to TU and /2 */ 5681 nextslot = (rstamp - txtime) + (sc->sc_tdmabintval << 9); 5682 nextslottu = TSF_TO_TU(nextslot>>32, nextslot) & HAL_BEACON_PERIOD; 5683 5684 /* 5685 * Retrieve the hardware NextTBTT in usecs 5686 * and calculate the difference between what the 5687 * other station thinks and what we have programmed. This 5688 * lets us figure how to adjust our timers to match. The 5689 * adjustments are done by pulling the TSF forward and possibly 5690 * rewriting the beacon timers. 5691 */ 5692 nexttbtt = ath_hal_getnexttbtt(ah); 5693 tsfdelta = (int32_t)((nextslot % TU_TO_TSF(HAL_BEACON_PERIOD + 1)) - nexttbtt); 5694 5695 DPRINTF(sc, ATH_DEBUG_TDMA_TIMER, 5696 "tsfdelta %d avg +%d/-%d\n", tsfdelta, 5697 TDMA_AVG(sc->sc_avgtsfdeltap), TDMA_AVG(sc->sc_avgtsfdeltam)); 5698 5699 if (tsfdelta < 0) { 5700 TDMA_SAMPLE(sc->sc_avgtsfdeltap, 0); 5701 TDMA_SAMPLE(sc->sc_avgtsfdeltam, -tsfdelta); 5702 tsfdelta = -tsfdelta % 1024; 5703 nextslottu++; 5704 } else if (tsfdelta > 0) { 5705 TDMA_SAMPLE(sc->sc_avgtsfdeltap, tsfdelta); 5706 TDMA_SAMPLE(sc->sc_avgtsfdeltam, 0); 5707 tsfdelta = 1024 - (tsfdelta % 1024); 5708 nextslottu++; 5709 } else { 5710 TDMA_SAMPLE(sc->sc_avgtsfdeltap, 0); 5711 TDMA_SAMPLE(sc->sc_avgtsfdeltam, 0); 5712 } 5713 tudelta = nextslottu - TSF_TO_TU(nexttbtt >> 32, nexttbtt); 5714 5715 /* 5716 * Copy sender's timetstamp into tdma ie so they can 5717 * calculate roundtrip time. We submit a beacon frame 5718 * below after any timer adjustment. The frame goes out 5719 * at the next TBTT so the sender can calculate the 5720 * roundtrip by inspecting the tdma ie in our beacon frame. 5721 * 5722 * NB: This tstamp is subtlely preserved when 5723 * IEEE80211_BEACON_TDMA is marked (e.g. when the 5724 * slot position changes) because ieee80211_add_tdma 5725 * skips over the data. 5726 */ 5727 memcpy(ATH_VAP(vap)->av_boff.bo_tdma + 5728 __offsetof(struct ieee80211_tdma_param, tdma_tstamp), 5729 &ni->ni_tstamp.data, 8); 5730#if 0 5731 DPRINTF(sc, ATH_DEBUG_TDMA_TIMER, 5732 "tsf %llu nextslot %llu (%d, %d) nextslottu %u nexttbtt %llu (%d)\n", 5733 (unsigned long long) tsf, (unsigned long long) nextslot, 5734 (int)(nextslot - tsf), tsfdelta, nextslottu, nexttbtt, tudelta); 5735#endif 5736 /* 5737 * Adjust the beacon timers only when pulling them forward 5738 * or when going back by less than the beacon interval. 5739 * Negative jumps larger than the beacon interval seem to 5740 * cause the timers to stop and generally cause instability. 5741 * This basically filters out jumps due to missed beacons. 5742 */ 5743 if (tudelta != 0 && (tudelta > 0 || -tudelta < sc->sc_tdmabintval)) { 5744 ath_tdma_settimers(sc, nextslottu, sc->sc_tdmabintval); 5745 sc->sc_stats.ast_tdma_timers++; 5746 } 5747 if (tsfdelta > 0) { 5748 ath_hal_adjusttsf(ah, tsfdelta); 5749 sc->sc_stats.ast_tdma_tsf++; 5750 } 5751 ath_tdma_beacon_send(sc, vap); /* prepare response */ 5752#undef TU_TO_TSF 5753#undef TSF_TO_TU 5754} 5755 5756/* 5757 * Transmit a beacon frame at SWBA. Dynamic updates 5758 * to the frame contents are done as needed. 5759 */ 5760static void 5761ath_tdma_beacon_send(struct ath_softc *sc, struct ieee80211vap *vap) 5762{ 5763 struct ath_hal *ah = sc->sc_ah; 5764 struct ath_buf *bf; 5765 int otherant; 5766 5767 /* 5768 * Check if the previous beacon has gone out. If 5769 * not don't try to post another, skip this period 5770 * and wait for the next. Missed beacons indicate 5771 * a problem and should not occur. If we miss too 5772 * many consecutive beacons reset the device. 5773 */ 5774 if (ath_hal_numtxpending(ah, sc->sc_bhalq) != 0) { 5775 sc->sc_bmisscount++; 5776 DPRINTF(sc, ATH_DEBUG_BEACON, 5777 "%s: missed %u consecutive beacons\n", 5778 __func__, sc->sc_bmisscount); 5779 if (sc->sc_bmisscount >= ath_bstuck_threshold) 5780 taskqueue_enqueue(sc->sc_tq, &sc->sc_bstucktask); 5781 return; 5782 } 5783 if (sc->sc_bmisscount != 0) { 5784 DPRINTF(sc, ATH_DEBUG_BEACON, 5785 "%s: resume beacon xmit after %u misses\n", 5786 __func__, sc->sc_bmisscount); 5787 sc->sc_bmisscount = 0; 5788 } 5789 5790 /* 5791 * Check recent per-antenna transmit statistics and flip 5792 * the default antenna if noticeably more frames went out 5793 * on the non-default antenna. 5794 * XXX assumes 2 anntenae 5795 */ 5796 if (!sc->sc_diversity) { 5797 otherant = sc->sc_defant & 1 ? 2 : 1; 5798 if (sc->sc_ant_tx[otherant] > sc->sc_ant_tx[sc->sc_defant] + 2) 5799 ath_setdefantenna(sc, otherant); 5800 sc->sc_ant_tx[1] = sc->sc_ant_tx[2] = 0; 5801 } 5802 5803 bf = ath_beacon_generate(sc, vap); 5804 if (bf != NULL) { 5805 /* 5806 * Stop any current dma and put the new frame on the queue. 5807 * This should never fail since we check above that no frames 5808 * are still pending on the queue. 5809 */ 5810 if (!ath_hal_stoptxdma(ah, sc->sc_bhalq)) { 5811 DPRINTF(sc, ATH_DEBUG_ANY, 5812 "%s: beacon queue %u did not stop?\n", 5813 __func__, sc->sc_bhalq); 5814 /* NB: the HAL still stops DMA, so proceed */ 5815 } 5816 ath_hal_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr); 5817 ath_hal_txstart(ah, sc->sc_bhalq); 5818 5819 sc->sc_stats.ast_be_xmit++; /* XXX per-vap? */ 5820 5821 /* 5822 * Record local TSF for our last send for use 5823 * in arbitrating slot collisions. 5824 */ 5825 vap->iv_bss->ni_tstamp.tsf = ath_hal_gettsf64(ah); 5826 } 5827} 5828#endif /* IEEE80211_SUPPORT_TDMA */ 5829 5830static void 5831ath_dfs_tasklet(void *p, int npending) 5832{ 5833 struct ath_softc *sc = (struct ath_softc *) p; 5834 struct ifnet *ifp = sc->sc_ifp; 5835 struct ieee80211com *ic = ifp->if_l2com; 5836 5837 /* 5838 * If previous processing has found a radar event, 5839 * signal this to the net80211 layer to begin DFS 5840 * processing. 5841 */ 5842 if (ath_dfs_process_radar_event(sc, sc->sc_curchan)) { 5843 /* DFS event found, initiate channel change */ 5844 ieee80211_dfs_notify_radar(ic, sc->sc_curchan); 5845 } 5846} 5847 5848MODULE_VERSION(if_ath, 1); 5849MODULE_DEPEND(if_ath, wlan, 1, 1, 1); /* 802.11 media layer */ 5850