ata-sis.c revision 188769
1/*-
2 * Copyright (c) 1998 - 2008 S�ren Schmidt <sos@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer,
10 *    without modification, immediately at the beginning of the file.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 */
26
27#include <sys/cdefs.h>
28__FBSDID("$FreeBSD: head/sys/dev/ata/chipsets/ata-sis.c 188769 2009-02-19 00:32:55Z mav $");
29
30#include "opt_ata.h"
31#include <sys/param.h>
32#include <sys/module.h>
33#include <sys/systm.h>
34#include <sys/kernel.h>
35#include <sys/ata.h>
36#include <sys/bus.h>
37#include <sys/endian.h>
38#include <sys/malloc.h>
39#include <sys/lock.h>
40#include <sys/mutex.h>
41#include <sys/sema.h>
42#include <sys/taskqueue.h>
43#include <vm/uma.h>
44#include <machine/stdarg.h>
45#include <machine/resource.h>
46#include <machine/bus.h>
47#include <sys/rman.h>
48#include <dev/pci/pcivar.h>
49#include <dev/pci/pcireg.h>
50#include <dev/ata/ata-all.h>
51#include <dev/ata/ata-pci.h>
52#include <ata_if.h>
53
54/* local prototypes */
55static int ata_sis_chipinit(device_t dev);
56static int ata_sis_ch_attach(device_t dev);
57static void ata_sis_reset(device_t dev);
58static void ata_sis_setmode(device_t dev, int mode);
59
60/* misc defines */
61#define SIS_33		1
62#define SIS_66		2
63#define SIS_100NEW	3
64#define SIS_100OLD	4
65#define SIS_133NEW	5
66#define SIS_133OLD	6
67#define SIS_SATA	7
68
69
70/*
71 * Silicon Integrated Systems Corp. (SiS) chipset support functions
72 */
73static int
74ata_sis_probe(device_t dev)
75{
76    struct ata_pci_controller *ctlr = device_get_softc(dev);
77    struct ata_chip_id *idx;
78    static struct ata_chip_id ids[] =
79    {{ ATA_SIS182,  0x00, SIS_SATA,   0, ATA_SA150, "182" }, /* south */
80     { ATA_SIS181,  0x00, SIS_SATA,   0, ATA_SA150, "181" }, /* south */
81     { ATA_SIS180,  0x00, SIS_SATA,   0, ATA_SA150, "180" }, /* south */
82     { ATA_SIS965,  0x00, SIS_133NEW, 0, ATA_UDMA6, "965" }, /* south */
83     { ATA_SIS964,  0x00, SIS_133NEW, 0, ATA_UDMA6, "964" }, /* south */
84     { ATA_SIS963,  0x00, SIS_133NEW, 0, ATA_UDMA6, "963" }, /* south */
85     { ATA_SIS962,  0x00, SIS_133NEW, 0, ATA_UDMA6, "962" }, /* south */
86
87     { ATA_SIS745,  0x00, SIS_100NEW, 0, ATA_UDMA5, "745" }, /* 1chip */
88     { ATA_SIS735,  0x00, SIS_100NEW, 0, ATA_UDMA5, "735" }, /* 1chip */
89     { ATA_SIS733,  0x00, SIS_100NEW, 0, ATA_UDMA5, "733" }, /* 1chip */
90     { ATA_SIS730,  0x00, SIS_100OLD, 0, ATA_UDMA5, "730" }, /* 1chip */
91
92     { ATA_SIS635,  0x00, SIS_100NEW, 0, ATA_UDMA5, "635" }, /* 1chip */
93     { ATA_SIS633,  0x00, SIS_100NEW, 0, ATA_UDMA5, "633" }, /* unknown */
94     { ATA_SIS630,  0x30, SIS_100OLD, 0, ATA_UDMA5, "630S"}, /* 1chip */
95     { ATA_SIS630,  0x00, SIS_66,     0, ATA_UDMA4, "630" }, /* 1chip */
96     { ATA_SIS620,  0x00, SIS_66,     0, ATA_UDMA4, "620" }, /* 1chip */
97
98     { ATA_SIS550,  0x00, SIS_66,     0, ATA_UDMA5, "550" },
99     { ATA_SIS540,  0x00, SIS_66,     0, ATA_UDMA4, "540" },
100     { ATA_SIS530,  0x00, SIS_66,     0, ATA_UDMA4, "530" },
101
102     { ATA_SIS5513, 0xc2, SIS_33,     1, ATA_UDMA2, "5513" },
103     { ATA_SIS5513, 0x00, SIS_33,     1, ATA_WDMA2, "5513" },
104     { 0, 0, 0, 0, 0, 0 }};
105    char buffer[64];
106    int found = 0;
107
108    if (pci_get_class(dev) != PCIC_STORAGE)
109	return (ENXIO);
110
111    if (pci_get_vendor(dev) != ATA_SIS_ID)
112	return ENXIO;
113
114    if (!(idx = ata_find_chip(dev, ids, -pci_get_slot(dev))))
115	return ENXIO;
116
117    if (idx->cfg2 && !found) {
118	u_int8_t reg57 = pci_read_config(dev, 0x57, 1);
119
120	pci_write_config(dev, 0x57, (reg57 & 0x7f), 1);
121	if (pci_read_config(dev, PCIR_DEVVENDOR, 4) == ATA_SIS5518) {
122	    found = 1;
123	    idx->cfg1 = SIS_133NEW;
124	    idx->max_dma = ATA_UDMA6;
125	    sprintf(buffer, "SiS 962/963 %s controller",
126		    ata_mode2str(idx->max_dma));
127	}
128	pci_write_config(dev, 0x57, reg57, 1);
129    }
130    if (idx->cfg2 && !found) {
131	u_int8_t reg4a = pci_read_config(dev, 0x4a, 1);
132
133	pci_write_config(dev, 0x4a, (reg4a | 0x10), 1);
134	if (pci_read_config(dev, PCIR_DEVVENDOR, 4) == ATA_SIS5517) {
135	    struct ata_chip_id id[] =
136		{{ ATA_SISSOUTH, 0x10, 0, 0, 0, "" }, { 0, 0, 0, 0, 0, 0 }};
137
138	    found = 1;
139	    if (ata_find_chip(dev, id, pci_get_slot(dev))) {
140		idx->cfg1 = SIS_133OLD;
141		idx->max_dma = ATA_UDMA6;
142	    }
143	    else {
144		idx->cfg1 = SIS_100NEW;
145		idx->max_dma = ATA_UDMA5;
146	    }
147	    sprintf(buffer, "SiS 961 %s controller",ata_mode2str(idx->max_dma));
148	}
149	pci_write_config(dev, 0x4a, reg4a, 1);
150    }
151    if (!found)
152	sprintf(buffer,"SiS %s %s controller",
153		idx->text, ata_mode2str(idx->max_dma));
154
155    device_set_desc_copy(dev, buffer);
156    ctlr->chip = idx;
157    ctlr->chipinit = ata_sis_chipinit;
158    return 0;
159}
160
161static int
162ata_sis_chipinit(device_t dev)
163{
164    struct ata_pci_controller *ctlr = device_get_softc(dev);
165
166    if (ata_setup_interrupt(dev, ata_generic_intr))
167	return ENXIO;
168
169    switch (ctlr->chip->cfg1) {
170    case SIS_33:
171	break;
172    case SIS_66:
173    case SIS_100OLD:
174	pci_write_config(dev, 0x52, pci_read_config(dev, 0x52, 1) & ~0x04, 1);
175	break;
176    case SIS_100NEW:
177    case SIS_133OLD:
178	pci_write_config(dev, 0x49, pci_read_config(dev, 0x49, 1) & ~0x01, 1);
179	break;
180    case SIS_133NEW:
181	pci_write_config(dev, 0x50, pci_read_config(dev, 0x50, 2) | 0x0008, 2);
182	pci_write_config(dev, 0x52, pci_read_config(dev, 0x52, 2) | 0x0008, 2);
183	break;
184    case SIS_SATA:
185	ctlr->r_type2 = SYS_RES_IOPORT;
186	ctlr->r_rid2 = PCIR_BAR(5);
187	if ((ctlr->r_res2 = bus_alloc_resource_any(dev, ctlr->r_type2,
188						   &ctlr->r_rid2, RF_ACTIVE))) {
189	    ctlr->ch_attach = ata_sis_ch_attach;
190	    ctlr->ch_detach = ata_pci_ch_detach;
191	    ctlr->reset = ata_sis_reset;
192
193	    /* enable PCI interrupt */
194	    pci_write_config(dev, PCIR_COMMAND,
195			     pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400,2);
196	}
197	ctlr->setmode = ata_sata_setmode;
198	return 0;
199    default:
200	return ENXIO;
201    }
202    ctlr->setmode = ata_sis_setmode;
203    return 0;
204}
205
206static int
207ata_sis_ch_attach(device_t dev)
208{
209    struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
210    struct ata_channel *ch = device_get_softc(dev);
211    int offset = ch->unit << ((ctlr->chip->chipid == ATA_SIS182) ? 5 : 6);
212
213    /* setup the usual register normal pci style */
214    if (ata_pci_ch_attach(dev))
215	return ENXIO;
216
217    ch->r_io[ATA_SSTATUS].res = ctlr->r_res2;
218    ch->r_io[ATA_SSTATUS].offset = 0x00 + offset;
219    ch->r_io[ATA_SERROR].res = ctlr->r_res2;
220    ch->r_io[ATA_SERROR].offset = 0x04 + offset;
221    ch->r_io[ATA_SCONTROL].res = ctlr->r_res2;
222    ch->r_io[ATA_SCONTROL].offset = 0x08 + offset;
223    ch->flags |= ATA_NO_SLAVE;
224
225    /* XXX SOS PHY hotplug handling missing in SiS chip ?? */
226    /* XXX SOS unknown how to enable PHY state change interrupt */
227    return 0;
228}
229
230static void
231ata_sis_reset(device_t dev)
232{
233    if (ata_sata_phy_reset(dev))
234	ata_generic_reset(dev);
235}
236
237static void
238ata_sis_setmode(device_t dev, int mode)
239{
240    device_t gparent = GRANDPARENT(dev);
241    struct ata_pci_controller *ctlr = device_get_softc(gparent);
242    struct ata_channel *ch = device_get_softc(device_get_parent(dev));
243    struct ata_device *atadev = device_get_softc(dev);
244    int devno = (ch->unit << 1) + atadev->unit;
245    int error;
246
247    mode = ata_limit_mode(dev, mode, ctlr->chip->max_dma);
248
249    if (ctlr->chip->cfg1 == SIS_133NEW) {
250	if (mode > ATA_UDMA2 &&
251	    pci_read_config(gparent, ch->unit ? 0x52 : 0x50,2) & 0x8000) {
252	    ata_print_cable(dev, "controller");
253	    mode = ATA_UDMA2;
254	}
255    }
256    else {
257	if (mode > ATA_UDMA2 &&
258	    pci_read_config(gparent, 0x48, 1)&(ch->unit ? 0x20 : 0x10)) {
259	    ata_print_cable(dev, "controller");
260	    mode = ATA_UDMA2;
261	}
262    }
263
264    error = ata_controlcmd(dev, ATA_SETFEATURES, ATA_SF_SETXFER, 0, mode);
265
266    if (bootverbose)
267	device_printf(dev, "%ssetting %s on %s chip\n",
268		      (error) ? "FAILURE " : "",
269		      ata_mode2str(mode), ctlr->chip->text);
270    if (!error) {
271	switch (ctlr->chip->cfg1) {
272	case SIS_133NEW: {
273	    u_int32_t timings[] =
274		{ 0x28269008, 0x0c266008, 0x04263008, 0x0c0a3008, 0x05093008,
275		  0x22196008, 0x0c0a3008, 0x05093008, 0x050939fc, 0x050936ac,
276		  0x0509347c, 0x0509325c, 0x0509323c, 0x0509322c, 0x0509321c};
277	    u_int32_t reg;
278
279	    reg = (pci_read_config(gparent, 0x57, 1)&0x40?0x70:0x40)+(devno<<2);
280	    pci_write_config(gparent, reg, timings[ata_mode2idx(mode)], 4);
281	    break;
282	    }
283	case SIS_133OLD: {
284	    u_int16_t timings[] =
285	     { 0x00cb, 0x0067, 0x0044, 0x0033, 0x0031, 0x0044, 0x0033, 0x0031,
286	       0x8f31, 0x8a31, 0x8731, 0x8531, 0x8331, 0x8231, 0x8131 };
287
288	    u_int16_t reg = 0x40 + (devno << 1);
289
290	    pci_write_config(gparent, reg, timings[ata_mode2idx(mode)], 2);
291	    break;
292	    }
293	case SIS_100NEW: {
294	    u_int16_t timings[] =
295		{ 0x00cb, 0x0067, 0x0044, 0x0033, 0x0031, 0x0044, 0x0033,
296		  0x0031, 0x8b31, 0x8731, 0x8531, 0x8431, 0x8231, 0x8131 };
297	    u_int16_t reg = 0x40 + (devno << 1);
298
299	    pci_write_config(gparent, reg, timings[ata_mode2idx(mode)], 2);
300	    break;
301	    }
302	case SIS_100OLD:
303	case SIS_66:
304	case SIS_33: {
305	    u_int16_t timings[] =
306		{ 0x0c0b, 0x0607, 0x0404, 0x0303, 0x0301, 0x0404, 0x0303,
307		  0x0301, 0xf301, 0xd301, 0xb301, 0xa301, 0x9301, 0x8301 };
308	    u_int16_t reg = 0x40 + (devno << 1);
309
310	    pci_write_config(gparent, reg, timings[ata_mode2idx(mode)], 2);
311	    break;
312	    }
313	}
314	atadev->mode = mode;
315    }
316}
317
318ATA_DECLARE_DRIVER(ata_sis);
319