ata-card.c revision 90215
1/*- 2 * Copyright (c) 1998,1999,2000,2001,2002 S�ren Schmidt <sos@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * $FreeBSD: head/sys/dev/ata/ata-card.c 90215 2002-02-04 19:23:40Z sos $ 29 */ 30 31#include <sys/param.h> 32#include <sys/systm.h> 33#include <sys/kernel.h> 34#include <sys/disk.h> 35#include <sys/module.h> 36#include <sys/bus.h> 37#include <sys/bio.h> 38#include <sys/malloc.h> 39#include <sys/devicestat.h> 40#include <sys/sysctl.h> 41#include <machine/stdarg.h> 42#include <machine/resource.h> 43#include <machine/bus.h> 44#include <sys/rman.h> 45#include <dev/ata/ata-all.h> 46#include <dev/pccard/pccardreg.h> 47#include <dev/pccard/pccardvar.h> 48#include <dev/pccard/pccarddevs.h> 49 50static int 51ata_pccard_match(device_t dev) 52{ 53 u_int32_t fcn = PCCARD_FUNCTION_UNSPEC; 54 int error = 0; 55 56 error = pccard_get_function(dev, &fcn); 57 if (error != 0) 58 return (error); 59 60 /* if it says its a disk we should register it */ 61 if (fcn == PCCARD_FUNCTION_DISK) 62 return (0); 63 64 /* other devices might need to be matched here */ 65 66 return(ENXIO); 67} 68 69static int 70ata_pccard_probe(device_t dev) 71{ 72 struct ata_channel *ch = device_get_softc(dev); 73 struct resource *io; 74 int rid, len, start, end; 75 u_long tmp; 76 77 /* allocate the io range to get start and length */ 78 rid = ATA_IOADDR_RID; 79 len = bus_get_resource_count(dev, SYS_RES_IOPORT, rid); 80 io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 81 ATA_IOSIZE, RF_ACTIVE); 82 if (!io) 83 return ENOMEM; 84 85 /* reallocate the io address to only cover the io ports */ 86 start = rman_get_start(io); 87 end = start + ATA_IOSIZE - 1; 88 bus_release_resource(dev, SYS_RES_IOPORT, rid, io); 89 io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 90 start, end, ATA_IOSIZE, RF_ACTIVE); 91 bus_release_resource(dev, SYS_RES_IOPORT, rid, io); 92 93 /* 94 * if we got more than the default ATA_IOSIZE ports, this is likely 95 * a pccard system where the altio ports are located at offset 14 96 * otherwise its the normal altio offset 97 */ 98 if (bus_get_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, &tmp, &tmp)) { 99 if (len > ATA_IOSIZE) { 100 bus_set_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, 101 start + ATA_PCCARD_ALTOFFSET, ATA_ALTIOSIZE); 102 } 103 else { 104 bus_set_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, 105 start + ATA_ALTOFFSET, ATA_ALTIOSIZE); 106 } 107 } 108 else 109 return ENOMEM; 110 111 ch->unit = 0; 112 ch->flags |= (ATA_USE_16BIT | ATA_NO_SLAVE); 113 return ata_probe(dev); 114} 115 116static device_method_t ata_pccard_methods[] = { 117 /* device interface */ 118 DEVMETHOD(device_probe, pccard_compat_probe), 119 DEVMETHOD(device_attach, pccard_compat_attach), 120 DEVMETHOD(device_detach, ata_detach), 121 122 /* Card interface */ 123 DEVMETHOD(card_compat_match, ata_pccard_match), 124 DEVMETHOD(card_compat_probe, ata_pccard_probe), 125 DEVMETHOD(card_compat_attach, ata_attach), 126 { 0, 0 } 127}; 128 129static driver_t ata_pccard_driver = { 130 "ata", 131 ata_pccard_methods, 132 sizeof(struct ata_channel), 133}; 134 135DRIVER_MODULE(ata, pccard, ata_pccard_driver, ata_devclass, 0, 0); 136